MICROCOM-MBR-MIB
143 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.102 | Nodemnpi | |||
| 1.3.6.1.4.1.102.1 | Nodembr | |||
| 1.3.6.1.4.1.102.1.1 | NodembrSystem | |||
| 1.3.6.1.4.1.102.1.1.1 | NodembrSysInfo | |||
| 1.3.6.1.4.1.102.1.1.1.1 | NodembrSysSwVers | |||
| 1.3.6.1.4.1.102.1.1.1.1.1 | ScalarmbrSWRev | read-only | mandatory | Major release number of the current software image |
| 1.3.6.1.4.1.102.1.1.1.1.2 | ScalarmbrSWRel | read-only | mandatory | Minor release number of the current software image |
| 1.3.6.1.4.1.102.1.1.1.1.3 | ScalarmbrSWTstVers | read-only | mandatory | Internal test release number of the current software image |
| 1.3.6.1.4.1.102.1.1.1.1.4 | ScalarmbrSWSpecial | read-only | mandatory | 'Customer Special' release number of the current software image |
| 1.3.6.1.4.1.102.1.1.1.2 | ScalarmbrBootDate | read-only | mandatory | Date of last system boot in an opaque format. When the value is represented as a four-byte number in canonical form with byte 0 being the most significant, the… |
| 1.3.6.1.4.1.102.1.1.1.3 | ScalarmbrBootTime | read-only | mandatory | Hour of last system boot in an opaque format. When the value is represented as a four-byte number in canonical form with byte 0 being the most significant, the… |
| 1.3.6.1.4.1.102.1.1.1.4 | NodembrConfigString | |||
| 1.3.6.1.4.1.102.1.1.1.4.1 | ScalarmbrArchCfgStr | read-only | mandatory | Archived (backup) config string. This corresponds to the file bridge.bak. Each instance of this object corresponds to a fixed size record that is a portion of … |
| 1.3.6.1.4.1.102.1.1.1.4.2 | ScalarmbrCurCfgStr | read-write | mandatory | Current config string used the next time the mbr restarts. This corresponds to the file bridge.cfg. Each instance of this object corresponds to a fixed size re… |
| 1.3.6.1.4.1.102.1.1.1.4.3 | ScalarmbrRunCfgStr | read-only | mandatory | Running config string it was last started. This corresponds to the file bridge.run. Each instance of this object corresponds to a fixed size record that is a p… |
| 1.3.6.1.4.1.102.1.1.1.5 | ScalarmbrSysAddress | read-only | mandatory | System MAC Address. Corresponds to the MAC address of one of the LAN ports present in the MBR. |
| 1.3.6.1.4.1.102.1.1.1.6 | ScalarmbrConfigRec | read-only | mandatory | Number of logical configuration records in a config string (of size 400 octets). The integer index value is one of the following: 1: mbrArchCfgStr, 2: mbrCurCf… |
| 1.3.6.1.4.1.102.1.1.2 | NodembrSysCfgTbl | |||
| 1.3.6.1.4.1.102.1.1.2.1 | ScalarmbrSysType | read-only | mandatory | MBR product type |
| 1.3.6.1.4.1.102.1.1.2.2 | ScalarmbrSysName | read-write | mandatory | This object is identical to sysName. It corresponds to the contents of the MBR file name.dat |
| 1.3.6.1.4.1.102.1.1.2.3 | ScalarmbrSysPasswd | read-write | mandatory | The system password. A read of this object results with a zero length string. Note that a control session is required to write this object. The maximum allowed… |
| 1.3.6.1.4.1.102.1.1.3 | NodembrSysStats | |||
| 1.3.6.1.4.1.102.1.1.3.1 | ScalarmbrDesigRootAddr | read-only | mandatory | The MAC address of the root of the spanning tree as determined by the Spanning Tree Protocol executing on this bridge. |
| 1.3.6.1.4.1.102.1.1.3.2 | ScalarmbrDesigRootPriority | read-only | mandatory | The priority value of the root of the spanning tree as determined by the Spanning Tree Protocol executing on this bridge |
| 1.3.6.1.4.1.102.1.1.3.3 | ScalarmbrRootPathCost | read-only | mandatory | The cost of the path to the root as seen from this bridge |
| 1.3.6.1.4.1.102.1.1.3.4 | ScalarmbrRootPort | read-only | mandatory | A string that describes the port number of the port which offers the lowest cost path from this bridge to the root bridge |
| 1.3.6.1.4.1.102.1.1.4 | NodembrSysControl | |||
| 1.3.6.1.4.1.102.1.1.4.1 | ScalarmbrCtrlRequester | read-write | mandatory | A unique string submitted by a manager when attempting to establish a control session. When a control session has been established, this value is copied to mbr… |
| 1.3.6.1.4.1.102.1.1.4.2 | ScalarmbrCtrlPasswd | read-write | mandatory | The password value submitted for verification when attempting to establish a control session. Verification is performed by comparing this value to mbrSysPasswd… |
| 1.3.6.1.4.1.102.1.1.4.3 | ScalarmbrCtrlCmd | read-write | mandatory | Writing this object causes an action to be taken by the MBR. The action taken corresponds to the value submitted by the manager. Control commands consist of th… |
| 1.3.6.1.4.1.102.1.1.4.4 | ScalarmbrCtrlPort | read-write | mandatory | The port number value submitted by a manager to be referenced in conjunction with port-specific actions defined by mbrCtrlCmd values. This value must be set wh… |
| 1.3.6.1.4.1.102.1.1.4.5 | ScalarmbrCtrlAddress | read-write | mandatory | Meaningful to SNMP/LLC-SNAP communications only. |
| 1.3.6.1.4.1.102.1.1.4.6 | ScalarmbrCtrlPath | read-write | mandatory | Meaningful to SNMP/LLC-SNAP communications only. |
| 1.3.6.1.4.1.102.1.1.4.7 | ScalarmbrCtrlParm | read-write | mandatory | This object qualifies the download operation requested when mbrCtrlCmd is requestDownload(3). The valid download operations are: 0: open file mbrDlFileName for… |
| 1.3.6.1.4.1.102.1.1.4.8 | ScalarmbrCtrlVC | read-write | mandatory | Meaningful to SNMP/LLC-SNAP communications only. |
| 1.3.6.1.4.1.102.1.1.5 | NodembrSession | |||
| 1.3.6.1.4.1.102.1.1.5.1 | ScalarmbrSessionFlag | read-write | mandatory | This object is true when a control session is active on this MBR. The control session partner may write a value of false to terminate the control session. The … |
| 1.3.6.1.4.1.102.1.1.5.2 | ScalarmbrSessionPartner | read-only | mandatory | This object identifies the control session partner. It is copied from the value of mbrCtrlRequester when a control session is established. |
| 1.3.6.1.4.1.102.1.1.5.3 | ScalarmbrSessionPath | read-only | mandatory | Meaningful to SNMP/LLC-SNAP communications only. |
| 1.3.6.1.4.1.102.1.1.6 | NodembrDownload | |||
| 1.3.6.1.4.1.102.1.1.6.1 | ScalarmbrDlFileName | read-only | mandatory | The target file's path name |
| 1.3.6.1.4.1.102.1.1.6.2 | ScalarmbrDlDevice | read-write | mandatory | This object is obsolete |
| 1.3.6.1.4.1.102.1.1.6.3 | ScalarmbrDlStatus | read-only | mandatory | This object denotes the state of the current download operation as follows: 0: download complete, 3: download progressing, 4: disk error occurred |
| 1.3.6.1.4.1.102.1.1.6.4 | ScalarmbrDlReadRec | read-only | mandatory | Each instance of this object corresponds to one fixed size record in the file mbrDlFileName. The integer index identifies the logical record accessed in mbrDlF… |
| 1.3.6.1.4.1.102.1.1.6.5 | ScalarmbrDlWriteRec | read-write | mandatory | Each instance of this object corresponds to one fixed size record in the file mbrDlFileName. The integer index identifies the logical record written to in mbrD… |
| 1.3.6.1.4.1.102.1.1.6.6 | ScalarmbrDlFileSize | read-only | mandatory | This object provides the number of records in mbrDlFileName. It is calculated by the MBR when mbrDlFileName is opened (for reading or writing). The fixed recor… |
| 1.3.6.1.4.1.102.1.1.7 | NodembrAlarms | |||
| 1.3.6.1.4.1.102.1.1.7.1 | TablembrAlarmTable | not-accessible | mandatory | Information about MBR alarms |
| 1.3.6.1.4.1.102.1.1.7.1.1 | RowmbrAlarmEntry | not-accessible | mandatory | An entry in the MBR alarm table. The integer index corresponds to the MBR alarm code. |
| 1.3.6.1.4.1.102.1.1.7.1.1.7 | ColumnmbrAlarmText | not-accessible | mandatory | The alarm text string that corresponds to the alarm instance represented by the current SNMP trap. Some alarm text strings contain printf-style format specifie… |
| 1.3.6.1.4.1.102.1.1.8 | NodembrNetReports | |||
| 1.3.6.1.4.1.102.1.1.8.4 | ScalarmbrNetRptDestIpAddress | read-write | mandatory | The IP address of a SNMP trap destination. A control session should be established before writing this object. |
| 1.3.6.1.4.1.102.1.1.10 | NodembrTraps | |||
| 1.3.6.1.4.1.102.1.1.10.1 | ScalarmbrTrapCode | not-accessible | mandatory | This value is the MBR alarm code. An SNMP trap containing this object represents an instance of the MBR alarm. |
| 1.3.6.1.4.1.102.1.1.10.2 | ScalarmbrTrapPort | not-accessible | mandatory | This value is the MBR port that an alarm has occurred on. Alarms that do not logically correspond to a port are assigned port number 1. |
| 1.3.6.1.4.1.102.1.1.10.3 | ScalarmbrTrapInfo | not-accessible | mandatory | One or more parameters that apply to a specific MBR alarm. The integer index identifies the position of the parameter in the printf argument list. The argument… |
| 1.3.6.1.4.1.102.1.1.11 | NodembrRingMgtAlarms | |||
| 1.3.6.1.4.1.102.1.1.11.1 | ScalarmbrRmAlarmStatAddr | not-accessible | mandatory | The MAC address of the Token Ring station that is experiencing a problem |
| 1.3.6.1.4.1.102.1.1.11.2 | ScalarmbrRmAlarmNaunAddr | not-accessible | mandatory | The MAC address of the nearest active upstream neighbor (NAUN) of the Token Ring station that is experiencing a problem |
| 1.3.6.1.4.1.102.1.1.11.14 | ScalarmbrRmAlarmBeaconType | not-accessible | mandatory | The value of the Beacon Type subvector in the last Beacon MAC frame received |
| 1.3.6.1.4.1.102.1.2 | NodembrWanInterfaces | |||
| 1.3.6.1.4.1.102.1.2.2 | NodembrWifTable | |||
| 1.3.6.1.4.1.102.1.2.2.1 | NodembrWifEntry | |||
| 1.3.6.1.4.1.102.1.2.2.1.2 | NodembrWifInfo | |||
| 1.3.6.1.4.1.102.1.2.2.1.2.1 | ScalarmbrWifLinkState | read-only | mandatory | This details the Spanning Tree Algorithm (STA) state of the port. When STA is off, the port may be either up, down, or disabled. |
| 1.3.6.1.4.1.102.1.2.2.1.2.2 | NodembrWifLinkDelay | |||
| 1.3.6.1.4.1.102.1.2.2.1.2.2.1 | ScalarmbrWifLinkDelaySeconds | read-only | mandatory | The seconds component of the round-trip link delay across the WAN port connection, including processing by the remote MBR. |
| 1.3.6.1.4.1.102.1.2.2.1.2.2.2 | ScalarmbrWifLinkDelayMillis | read-only | mandatory | The milliseconds component of the round-trip link delay across a WAN port connection, including processing by the remote MBR. |
| 1.3.6.1.4.1.102.1.2.2.1.2.3 | ScalarmbrWifSppActiveCount | read-only | mandatory | The number of active SPP connections for this WAN port. This number is updated by the MBR only when the 3Com protocol support option is enabled for this WAN po… |
| 1.3.6.1.4.1.102.1.2.2.1.2.4 | ScalarmbrWifLinkSpeed | read-only | mandatory | The bandwith of the port in units of 100 bps. This object is equivalent to ifSpeed/100 |
| 1.3.6.1.4.1.102.1.2.2.1.2.5 | ScalarmbrWifLinkChangeTime | read-only | mandatory | Hour of last system boot in an opaque format. When the value is represented as a four-byte integer in canonical form with byte 0 being the most significant, th… |
| 1.3.6.1.4.1.102.1.2.2.1.2.6 | ScalarmbrWifLinkChangeDate | read-only | mandatory | Date of last system boot in an opaque format. When the value is represented as a four-byte integer in canonical form with byte 0 being the most significant, th… |
| 1.3.6.1.4.1.102.1.2.2.1.2.7 | ScalarmbrWifLongTermStatsInterval | read-only | mandatory | This object represents the current time interval that the MBR is using to track its long term statistics for this port. |
| 1.3.6.1.4.1.102.1.2.2.1.2.8 | ScalarmbrWifCompNeg | read-only | mandatory | Negotiated compression for this port |
| 1.3.6.1.4.1.102.1.2.2.1.2.9 | ScalarmbrWifLoadShareSetId | read-only | mandatory | This object is non-zero only if this port is a member of a set of load-sharing WAN ports. All members of a single set of load-sharing WAN ports share the same … |
| 1.3.6.1.4.1.102.1.2.2.1.2.10 | NodembrWifSpecificInfo | |||
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1 | NodembrWifX25Info | |||
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.1 | ScalarmbrWifVcCount | read-only | mandatory | The number of VCs configured for this port. |
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2 | NodembrWifVcInfo | |||
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2.1 | ScalarmbrWifVcCallState | read-only | mandatory | The call state of this VC. |
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2.2 | NodembrWifVcDelay | |||
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2.2.1 | ScalarmbrWifVcDelaySeconds | read-only | mandatory | The seconds component of the round-trip delay across the VC, including processing by the remote MBR. |
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2.2.2 | ScalarmbrWifVcDelayMillis | read-only | mandatory | The milliseconds component of the round-trip delay across the VC, including processing by the remote MBR. |
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2.3 | ScalarmbrWifVcLongTermStatsInterval | read-only | mandatory | This object represents the current time interval that the MBR is using to track its long term statistics for this VC. |
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2.4 | ScalarmbrWifVcCompNeg | read-only | mandatory | Negotiated compression for this VC |
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2.5 | ScalarmbrWifVcLcn | read-only | mandatory | The LCN assigned to this VC |
| 1.3.6.1.4.1.102.1.2.2.1.2.10.1.2.6 | ScalarmbrWifVcRemoteDte | read-only | mandatory | The DTE address to which this VC call is established |
| 1.3.6.1.4.1.102.1.2.2.1.3 | TablembrWifStatTable | not-accessible | mandatory | Table for short and long term WAN statistics |
| 1.3.6.1.4.1.102.1.2.2.1.3.1 | RowmbrWifStatEntry | not-accessible | mandatory | An entry in the WAN statistics table. The first of the two integer index values specifies the relative time interval of the statistic value. Short term stats a… |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.1 | ColumnmbrWifRcvChars | read-only | mandatory | The number of octets received from this WAN port during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.2 | ColumnmbrWifXmtChars | read-only | mandatory | The number of octets transmitted from this WAN port during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.3 | ColumnmbrWifRcvFrames | read-only | mandatory | The number of HDLC frames received from this WAN port during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.4 | ColumnmbrWifXmtFrames | read-only | mandatory | The number of HDLC frames transmitted out this WAN port during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.5 | ColumnmbrWifRcvBadFrames | read-only | mandatory | The number of HDLC frames received with error during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.6 | ColumnmbrWifXmtRejects | read-only | mandatory | The number of HDLC frame rejects transmitted during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.7 | ColumnmbrWifRcvRejects | read-only | mandatory | The number of HDLC frame rejects received during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.8 | ColumnmbrWifRexmtTimeouts | read-only | mandatory | The number of retransmission timer timeouts occurrences during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.9 | ColumnmbrWifLanPktsDiscarded | read-only | mandatory | The number of LAN packets discarded due to lack of resources during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.10 | ColumnmbrWifMgmtPktsForwarded | read-only | mandatory | The number of proprietary link-management packets forwarded during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.11 | ColumnmbrWifRcvCompRatio | read-only | mandatory | The current ratio of raw octets to compressed octets received for this WAN connection. The index indicates the MBR port number. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.12 | ColumnmbrWifXmtCompRatio | read-only | mandatory | The current ratio of raw octets to compressed octets transmitted for this WAN connection. The index indicates the MBR port number. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.13 | ColumnmbrWifRminCompRatio | read-only | mandatory | The lowest ratio of raw octets to compressed octets received for this WAN connection. The index indicates the MBR port number. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.14 | ColumnmbrWifXminCompRatio | read-only | mandatory | The lowest ratio of raw octets to compressed octets transmitted for this WAN connection. The index indicates the MBR port number. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.15 | ColumnmbrWifRmaxCompRatio | read-only | mandatory | The highest ratio of raw octets to compressed octets received for this WAN connection. The index indicates the MBR port number. |
| 1.3.6.1.4.1.102.1.2.2.1.3.1.16 | ColumnmbrWifXmaxCompRatio | read-only | mandatory | The highest ratio of raw octets to compressed octets transmitted for this WAN connection. The index indicates the MBR port number. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2 | TablembrWifVcStatTable | not-accessible | mandatory | Table for short and long term VC statistics |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1 | RowmbrWifVcStatEntry | not-accessible | mandatory | An entry in the VC statistics table. The first of the three integer index values specifies the relative time interval of the statisitics value. Short term stat… |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.1 | ColumnmbrWifVcRcvChars | read-only | mandatory | The number of octets received from this VC during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.2 | ColumnmbrWifVcXmtChars | read-only | mandatory | The number of octets transmitted on this VC during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.3 | ColumnmbrWifVcRcvX25Pkts | read-only | mandatory | The number of X.25 packets received from this VC during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.4 | ColumnmbrWifVcXmtX25Pkts | read-only | mandatory | The number of X.25 packets transmitted on this VC during the last stats interval. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.5 | ColumnmbrWifVcRcvCompRatio | read-only | mandatory | The current ratio of raw octets to compressed octets received for this VC. The index values indicate the MBR port number and VC number, respectively. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.6 | ColumnmbrWifVcXmtCompRatio | read-only | mandatory | The current ratio of raw octets to compressed octets transmitted for this VC. The index values indicate the MBR port number and VC number, respectively. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.7 | ColumnmbrWifVcRminCompRatio | read-only | mandatory | The lowest ratio of raw octets to compressed octets received for this VC. The index values indicate the MBR port number and VC number, respectively. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.8 | ColumnmbrWifVcXminCompRatio | read-only | mandatory | The lowest ratio of raw octets to compressed octets transmitted for this VC. The index values indicate the MBR port number and VC number, respectively. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.9 | ColumnmbrWifVcRmaxCompRatio | read-only | mandatory | The highest ratio of raw octets to compressed octets received for this VC. The index values indicate the MBR port number and VC number, respectively. |
| 1.3.6.1.4.1.102.1.2.2.1.3.2.1.10 | ColumnmbrWifVcXmaxCompRatio | read-only | mandatory | The highest ratio of raw octets to compressed octets transmitted for this VC. The index values indicate the MBR port number and VC number, respectively. |
| 1.3.6.1.4.1.102.1.3 | NodembrLanInterfaces | |||
| 1.3.6.1.4.1.102.1.3.2 | NodembrLifTable | |||
| 1.3.6.1.4.1.102.1.3.2.1 | NodembrLifEntry | |||
| 1.3.6.1.4.1.102.1.3.2.1.2 | NodembrLifInfo | |||
| 1.3.6.1.4.1.102.1.3.2.1.2.1 | ScalarmbrLifState | read-only | mandatory | This object represents the Spanning Tree Algorithm (STA) state of the port. The values are enumerated for the object mbrWifLinkState. When STA is off, the port… |
| 1.3.6.1.4.1.102.1.3.2.1.2.2 | ScalarmbrLifMacAddress | read-only | mandatory | The MAC address of the LAN card corresponding to this port. The integer index value indicates the MBR port. |
| 1.3.6.1.4.1.102.1.3.2.1.2.3 | ScalarmbrLifHardwareRev | read-only | mandatory | The hardware revision level of the LAN card correspond- ing to this port. The integer index value indicates the MBR port. |
| 1.3.6.1.4.1.102.1.3.2.1.2.4 | ScalarmbrLifLongTermStatsInterval | read-only | mandatory | This object represents the current time interval that the MBR is using to track its long term statistics for this port. |
| 1.3.6.1.4.1.102.1.3.2.1.2.5 | ScalarmbrLifRingNumber | not-accessible | mandatory | The ring number assigned to the 802.5 LAN that this port is connected to. This object is available in SNMP traps only. |
| 1.3.6.1.4.1.102.1.3.2.1.3 | NodembrLifStatistics | |||
| 1.3.6.1.4.1.102.1.3.2.1.3.1 | TablembrLifStatTable | not-accessible | mandatory | Table for short and long term LAN statistics |
| 1.3.6.1.4.1.102.1.3.2.1.3.1.1 | RowmbrLifStatEntry | not-accessible | mandatory | An entry in the LAN statistics table. The first of the two integer index values specifies the relative time interval of the statistic value. Short term stats a… |
| 1.3.6.1.4.1.102.1.3.2.1.3.1.1.1 | ColumnmbrLifRcvPkts | read-only | mandatory | The number of packets received from this WAN port during the last stats interval. |
| 1.3.6.1.4.1.102.1.3.2.1.3.1.1.2 | ColumnmbrLifFwdPkts | read-only | mandatory | The number of packets transmitted from this LAN port during the last stats interval. |
| 1.3.6.1.4.1.102.1.3.2.1.3.1.1.3 | ColumnmbrLifRcvMcastPkts | read-only | mandatory | The number of multicast packets received from this LAN port during the last stats interval. |
| 1.3.6.1.4.1.102.1.3.2.1.3.1.1.4 | ColumnmbrLifFwdMcastPkts | read-only | mandatory | The number of multicast packets forwarded to other ports during the last stats interval. |
| 1.3.6.1.4.1.102.1.3.2.1.3.1.1.5 | ColumnmbrLifRcvErrPkts | read-only | mandatory | The number of packets received with error during the last stats interval. |
| 1.3.6.1.4.1.102.1.3.2.1.3.1.1.6 | ColumnmbrLifNobufDiscPkts | read-only | mandatory | The number of received packets discarded due to lack of resources during the last stats interval. |
| 1.3.6.1.4.1.102.1.3.2.1.3.1.1.7 | ColumnmbrLifXmtPkts | read-only | mandatory | The number of packets transmitted during the last stats interval. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CompRatio | INTEGER | ||
| LongTermStatsPeriod | INTEGER (0..6) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| PortNum | INTEGER (1..5) | ||
| StatsInterval | INTEGER | ||
| StatsRawCount | INTEGER | ||
| VcNum | INTEGER (1..15) |