MPLS-DSTE-MIB
58 objects
This MIB contains managed object definitions for Diff-Serv-aware MPLS Traffic Engineering as described in [DSTE-REQ][DSTE-PROTO].
Imported Objects
| MPLS-LSR-MIB | mplsInterfaceConfEntry mplsXCEntry |
| MPLS-TC-MIB | MplsBitRate mplsMIB |
| MPLS-TE-MIB | mplsTunnelEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.9999.8 | IdentitymplsDsTeMIB | This MIB contains managed object definitions for Diff-Serv-aware MPLS Traffic Engineering as described in [DSTE-REQ][DSTE-PROTO]. | ||
| 1.3.6.1.2.1.10.9999.8.1 | NodemplsDsTeObjects | |||
| 1.3.6.1.2.1.10.9999.8.1.1 | NodemplsDsTeScalarObjects | |||
| 1.3.6.1.2.1.10.9999.8.1.1.1 | ScalarmplsDsTeBwConstraintModel | read-write | current | Bandwidth Constraint Model currently in use by this LSR. The bandwidth constraint model used by LSRs in a single DS-TE domain, must be same. As per the specifi… |
| 1.3.6.1.2.1.10.9999.8.1.3 | TablemplsDsTeIfBCTable | not-accessible | current | This table specifies bandwidth constraints associated with DS-TE enabled interfaces. This table AUGMENTS the mplsInterfaceConfTable [LSR-MIB]. |
| 1.3.6.1.2.1.10.9999.8.1.3.1 | RowmplsDsTeIfBCEntry | not-accessible | current | A row is created in this table automatically by an LSR for every interface capable of supporting MPLS DS-TE if this MIB is implemented. This relationship exist… |
| 1.3.6.1.2.1.10.9999.8.1.3.1.1 | ColumnmplsDsTeIfBC0MaxBw | read-create | current | The maximum reservable bandwidth on this interface. As per the [DSTE-PROT0] draft, this also can be interpreted as the Bandwidth Constraint 0 (BC0). By default… |
| 1.3.6.1.2.1.10.9999.8.1.3.1.2 | ColumnmplsDsTeIfBC1MaxBw | read-create | current | The maximum reservable bandwidth for Bandwidth Constraint 1 (BC1) on this interface, in Kbps. |
| 1.3.6.1.2.1.10.9999.8.1.3.1.3 | ColumnmplsDsTeIfBC2MaxBw | read-create | current | The maximum reservable bandwidth for Bandwidth Constraint 2 (BC2) on this interface, in Kbps. |
| 1.3.6.1.2.1.10.9999.8.1.3.1.4 | ColumnmplsDsTeIfBC3MaxBw | read-create | current | The maximum reservable bandwidth for Bandwidth Constraint 3 (BC3) on this interface, in Kbps. |
| 1.3.6.1.2.1.10.9999.8.1.3.1.5 | ColumnmplsDsTeIfBC4MaxBw | read-create | current | The maximum reservable bandwidth for Bandwidth Constraint 4 (BC4) on this interface, in Kbps. |
| 1.3.6.1.2.1.10.9999.8.1.3.1.6 | ColumnmplsDsTeIfBC5MaxBw | read-create | current | The maximum reservable bandwidth for Bandwidth Constraint 5 (BC5) on this interface, in Kbps. |
| 1.3.6.1.2.1.10.9999.8.1.3.1.7 | ColumnmplsDsTeIfBC6MaxBw | read-create | current | The maximum reservable bandwidth for Bandwidth Constraint 6 (BC6) on this interface, in Kbps. |
| 1.3.6.1.2.1.10.9999.8.1.3.1.8 | ColumnmplsDsTeIfBC7MaxBw | read-create | current | The maximum reservable bandwidth for Bandwidth Constraint 7 (BC7) on this interface, in Kbps. |
| 1.3.6.1.2.1.10.9999.8.1.4 | TablemplsDsTeIfLOMTable | not-accessible | current | This table allows administrator to configure a local overbooking multiplier on a per link per class-type basis. |
| 1.3.6.1.2.1.10.9999.8.1.4.1 | RowmplsDsTeIfLOMEntry | not-accessible | current | A row is created in this table automatically by an LSR for every interface capable of supporting MPLS and is enable to do so, since it AUGMENTs the mplsInterfa… |
| 1.3.6.1.2.1.10.9999.8.1.4.1.1 | ColumnmplsDsTeIfLOMCT0 | read-create | current | This value represents the bandwidth overbooking multiplier for the class-type 0, on the specified interface, in percentage. |
| 1.3.6.1.2.1.10.9999.8.1.4.1.2 | ColumnmplsDsTeIfLOMCT1 | read-create | current | This value represents the bandwidth overbooking multiplier for the class-type 1, on the specified interface, in percentage. |
| 1.3.6.1.2.1.10.9999.8.1.4.1.3 | ColumnmplsDsTeIfLOMCT2 | read-create | current | This value represents the bandwidth overbooking multiplier for the class-type 2, on the specified interface, in percentage. |
| 1.3.6.1.2.1.10.9999.8.1.4.1.4 | ColumnmplsDsTeIfLOMCT3 | read-create | current | This value represents the bandwidth overbooking multiplier for the class-type 3, on the specified interface, in percentage. |
| 1.3.6.1.2.1.10.9999.8.1.4.1.5 | ColumnmplsDsTeIfLOMCT4 | read-create | current | This value represents the bandwidth overbooking multiplier for the class-type 4, on the specified interface, in percentage. |
| 1.3.6.1.2.1.10.9999.8.1.4.1.6 | ColumnmplsDsTeIfLOMCT5 | read-create | current | This value represents the bandwidth overbooking multiplier for the class-type 5, on the specified interface, in percentage. |
| 1.3.6.1.2.1.10.9999.8.1.4.1.7 | ColumnmplsDsTeIfLOMCT6 | read-create | current | This value represents the bandwidth overbooking multiplier for the class-type 6, on the specified interface, in percentage. |
| 1.3.6.1.2.1.10.9999.8.1.4.1.8 | ColumnmplsDsTeIfLOMCT7 | read-create | current | This value represents the bandwidth overbooking multiplier for the class-type 7, on the specified interface, in percentage. |
| 1.3.6.1.2.1.10.9999.8.1.5 | TablemplsDsTeClassTable | not-accessible | current | This per LSR table provides the mapping between the TE-Class supported on the LSR and <Class-Type,Priority> pair. |
| 1.3.6.1.2.1.10.9999.8.1.5.1 | RowmplsDsTeClassEntry | not-accessible | current | An entry in this table represents a mapping between the TE-Class and <Class-Type,Priority> pair. The [DSTE-PROTO] indicates that a DS TE domain can support 8 T… |
| 1.3.6.1.2.1.10.9999.8.1.5.1.1 | ColumnmplsDsTeClassIndex | accessible-for-notify | current | This value represents the index of the TE-Class being configured on the LSR. |
| 1.3.6.1.2.1.10.9999.8.1.5.1.2 | ColumnmplsDsTeClassType | accessible-for-notify | current | This value represents a Class-Type supported on the LSR. |
| 1.3.6.1.2.1.10.9999.8.1.5.1.3 | ColumnmplsDsTeClassPriority | read-create | current | This value represents the preemption priority (setup or holding) supported for a particular class-type, on the LSR. |
| 1.3.6.1.2.1.10.9999.8.1.5.1.4 | ColumnmplsDsTeClassDescription | read-create | current | Textual description of the TE-Class defined by this row. |
| 1.3.6.1.2.1.10.9999.8.1.5.1.5 | ColumnmplsDsTeClassRowStatus | read-create | current | The row status for a row in this table. |
| 1.3.6.1.2.1.10.9999.8.1.5.1.6 | ColumnmplsDsTeClassStorageType | read-create | current | The storage type for this entry. |
| 1.3.6.1.2.1.10.9999.8.1.6 | TablemplsDsTeIfUnresBwTable | not-accessible | current | This table presents the unreserved bandwidth available on each interface for each TE-Class. |
| 1.3.6.1.2.1.10.9999.8.1.6.1 | RowmplsDsTeIfUnresBwEntry | not-accessible | current | A row is created in this table automatically by an LSR for every interface capable of supporting MPLS and is enable to do so, since it AUGMENTs the mplsInterfa… |
| 1.3.6.1.2.1.10.9999.8.1.6.1.1 | ColumnmplsDsTeIfUnresBwTEClass0 | read-only | current | This value represents the unreserved bandwidth for the TE-Class 0, on the specified interface. |
| 1.3.6.1.2.1.10.9999.8.1.6.1.2 | ColumnmplsDsTeIfUnresBwTEClass1 | read-only | current | This value represents the unreserved bandwidth for the TE-Class 1, on the specified interface |
| 1.3.6.1.2.1.10.9999.8.1.6.1.3 | ColumnmplsDsTeIfUnresBwTEClass2 | read-only | current | This value represents the unreserved bandwidth for the TE-Class 2, on the specified interface |
| 1.3.6.1.2.1.10.9999.8.1.6.1.4 | ColumnmplsDsTeIfUnresBwTEClass3 | read-only | current | This value represents the unreserved bandwidth for the TE-Class 3, on the specified interface |
| 1.3.6.1.2.1.10.9999.8.1.6.1.5 | ColumnmplsDsTeIfUnresBwTEClass4 | read-only | current | This value represents the unreserved bandwidth for the TE-Class 4, on the specified interface |
| 1.3.6.1.2.1.10.9999.8.1.6.1.6 | ColumnmplsDsTeIfUnresBwTEClass5 | read-only | current | This value represents the unreserved bandwidth for the TE-Class 5, on the specified interface |
| 1.3.6.1.2.1.10.9999.8.1.6.1.7 | ColumnmplsDsTeIfUnresBwTEClass6 | read-only | current | This value represents the unreserved bandwidth for the TE-Class 6, on the specified interface |
| 1.3.6.1.2.1.10.9999.8.1.6.1.8 | ColumnmplsDsTeIfUnresBwTEClass7 | read-only | current | This value represents the unreserved bandwidth for the TE-Class 7, on the specified interface |
| 1.3.6.1.2.1.10.9999.8.1.7 | TablemplsDsTeTunTable | not-accessible | current | This table indicates which DiffServ Class-Type the particular Traffic Engineering tunnels have been assigned to. This table extends the mplsTunnelTable from th… |
| 1.3.6.1.2.1.10.9999.8.1.7.1 | RowmplsDsTeTunEntry | not-accessible | current | An entry in this table is created by an LSR for every traffic engineering tunnel instance capable of supporting MPLS DiffServ-Aware Traffic Engineering. |
| 1.3.6.1.2.1.10.9999.8.1.7.1.5 | ColumnmplsDsTeTunTunnelClassType | read-only | current | This object indicates the DiffServ-Aware TE class to which this tunnel instance has been assigned. If the specified class-type does not appear in the mplsDsTeC… |
| 1.3.6.1.2.1.10.9999.8.1.8 | TablemplsDsTeLspTable | not-accessible | current | This table indicates which DiffServ-Aware TE class particular LSPs. This table AUGMENTS the mplsXCTable. |
| 1.3.6.1.2.1.10.9999.8.1.8.1 | RowmplsDsTeLspEntry | not-accessible | current | An entry in this table is created by an LSR for every LSP capable of supporting MPLS DiffServ-Aware Traffic Engineering. Specifically, an entry in this table m… |
| 1.3.6.1.2.1.10.9999.8.1.8.1.1 | ColumnmplsDsTeLspClassType | read-only | current | This object indicates the DiffServ-Aware TE class to which this LSP has been assigned. |
| 1.3.6.1.2.1.10.9999.8.2 | NodemplsDsTeNotifications | |||
| 1.3.6.1.2.1.10.9999.8.3 | NodemplsDsTeConformance | |||
| 1.3.6.1.2.1.10.9999.8.3.1 | NodemplsDsTeGroups | |||
| 1.3.6.1.2.1.10.9999.8.3.1.1 | GroupmplsDsTeScalarGroup | current | Collection of scalar objects required for DS TE management. | |
| 1.3.6.1.2.1.10.9999.8.3.1.2 | GroupmplsDsTeIfBCGroup | current | Collection of objects needed for managing the Bandwidth constraints on a per MPLS Interface basis. | |
| 1.3.6.1.2.1.10.9999.8.3.1.3 | GroupmplsDsTeIfLOMGroup | current | Collection of objects needed for managing the Local Overbooking Multiplier on a per Class-Type per MPLS interface basis. | |
| 1.3.6.1.2.1.10.9999.8.3.1.4 | GroupmplsDsTeClassGroup | current | Collection of objects needed for managing the TE-Class definitions within the DSTE LSR. | |
| 1.3.6.1.2.1.10.9999.8.3.1.5 | GroupmplsDsTeTunGroup | current | Collection of objects needed for MPLS DS TE Tunnel management. | |
| 1.3.6.1.2.1.10.9999.8.3.2 | NodemplsDsTeCompliances | |||
| 1.3.6.1.2.1.10.9999.8.3.2.1 | CompliancemplsDsTeModuleCompliance | current | Compliance statement for agents that support MPLS Diff-Serv Aware Traffic Engineering. |