MPLS-FRR-STD-MIB
81 objects
Copyright (C) 2006 The IETF Trust. This MIB module is part of RFC 4327; see the RFC itself for full legal notices. This MIB module contains managed object definitions for MPLS Traffic Engineering Fast Reroute as defined in RFC4090.
Imported Objects
| IF-MIB | ifCounterDiscontinuityGroup ifGeneralInformationGroup InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| MPLS-TC-STD-MIB | MplsBitRate MplsLsrIdentifier mplsStdMIB MplsTunnelAffinity MplsTunnelIndex MplsTunnelInstanceIndex |
| MPLS-TE-STD-MIB | mplsTunnelARHopIndex mplsTunnelARHopListIndex mplsTunnelGroup mplsTunnelScalarGroup |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | 0 RowStatus StorageType MPLS Fast-reroute MIB March 5 TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166 | IdentitymplsFrrMIB | Copyright (C) 2006 The IETF Trust. This MIB module is part of RFC 4327; see the RFC itself for full legal notices. This MIB module contains managed object defi… | ||
| 1.3.6.1.2.1.10.166.0 | NodemplsFrrNotif | |||
| 1.3.6.1.2.1.10.166.0.1 | NotificationmplsFrrFacProtected | current | This notification is generated when a tunnel running over an interface as specified in the mplsFrrConstTable is initially protected by the backup tunnel also s… | |
| 1.3.6.1.2.1.10.166.0.2 | NotificationmplsFrrFacUnProtected | current | This notification is generated when the final tunnel that is being protected by a backup tunnel as specified in the mplsFrrConstTable is restored to normal ope… | |
| 1.3.6.1.2.1.10.166.1 | NodemplsFrrScalars | |||
| 1.3.6.1.2.1.10.166.1.1 | ScalarmplsFrrDetourIncoming | read-only | current | The number of detour LSPs entering the device (greater than or equal to 0) if mplsFrrProtectionMethod is set to oneToOneBackup(1), or -1 if mplsFrrProtectionMe… |
| 1.3.6.1.2.1.10.166.1.2 | ScalarmplsFrrDetourOutgoing | read-only | current | The number of detour LSPs leaving the device (greater than or equal to 0) if mplsFrrProtectionMethod is set to oneToOneBackup(1), or -1 if mplsFrrProtectionMet… |
| 1.3.6.1.2.1.10.166.1.3 | ScalarmplsFrrDetourOriginating | read-only | current | The number of detour LSPs originating at this PLR (greater than or equal to 0) if mplsFrrProtectionMethod is set to oneToOneBackup(1). This object MUST return … |
| 1.3.6.1.2.1.10.166.1.4 | ScalarmplsFrrSwitchover | read-only | current | The number of tunnel instances for which this LSR is the ingress that are currently using a detour or bypass LSP to reach their egress. |
| 1.3.6.1.2.1.10.166.1.5 | ScalarmplsFrrConfIfs | read-only | current | Indicates the number of MPLS interfaces configured for protection by the FRR feature if mplsFrrProtectionMethod is set to facilityBackup(2), otherwise this val… |
| 1.3.6.1.2.1.10.166.1.6 | ScalarmplsFrrActProtectedIfs | read-only | current | Indicates the number of interfaces currently being protected by the FRR feature if mplsFrrProtectionMethod is set to facilityBackup(2), otherwise this value sh… |
| 1.3.6.1.2.1.10.166.1.7 | ScalarmplsFrrConfProtectionTuns | read-only | current | Indicates the number of bypass tunnels configured to protect TE tunnels on this LSR using the FRR feature if mplsFrrProtectionMethod is set to facilityBackup(2… |
| 1.3.6.1.2.1.10.166.1.8 | ScalarmplsFrrActProtectionTuns | read-only | current | Indicates the number of bypass tunnels indicated in mplsFrrConfProtectionTuns whose operStatus is up(1) indicating that they are currently protecting TE tunnel… |
| 1.3.6.1.2.1.10.166.1.9 | ScalarmplsFrrActProtectedLSPs | read-only | current | Indicates the number of LSPs currently protected by the FRR feature where this device acts as the PLR for those LSPs. If mplsFrrProtectionMethod is set to faci… |
| 1.3.6.1.2.1.10.166.1.10 | ScalarmplsFrrProtectionMethod | read-write | current | Indicates which protection method is to be used for fast reroute on this device. Some devices may require a reboot if this variable is to take affect after bei… |
| 1.3.6.1.2.1.10.166.1.11 | ScalarmplsFrrNotifsEnabled | read-write | current | Enables or disables FRR notifications defined in this MIB module. Notifications are disabled by default. |
| 1.3.6.1.2.1.10.166.1.12 | ScalarmplsFrrNotifMaxRate | read-write | current | This variable indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these n… |
| 1.3.6.1.2.1.10.166.2 | NodemplsFrrObjects | |||
| 1.3.6.1.2.1.10.166.2.1 | NodemplsFrrGeneralObjects | |||
| 1.3.6.1.2.1.10.166.2.1.1 | TablemplsFrrConstTable | not-accessible | current | |
| 1.3.6.1.2.1.10.166.2.1.1.1 | RowmplsFrrConstEntry | not-accessible | current | An entry in this table represents detour LSP or bypass tunnel setup constraints for a tunnel instance to be protected by detour LSPs or a bypass tunnel. Agents… |
| 1.3.6.1.2.1.10.166.2.1.1.1.1 | ColumnmplsFrrConstIfIndex | not-accessible | current | Uniquely identifies an interface which a fast reroute protection tunnel is configured to potentially protect in the event of a fault. Entries with this index s… |
| 1.3.6.1.2.1.10.166.2.1.1.1.2 | ColumnmplsFrrConstTunnelIndex | not-accessible | current | Uniquely identifies a tunnel for which is configured to possibly protect the interface(s) specified by mplsFrrConstIfIndex in the event of a fault as must exis… |
| 1.3.6.1.2.1.10.166.2.1.1.1.3 | ColumnmplsFrrConstTunnelInstance | not-accessible | current | Uniquely identifies an existing instance of this tunnel for which fast reroute is requested. Note that a value of 0 indicates that the configuration points at … |
| 1.3.6.1.2.1.10.166.2.1.1.1.4 | ColumnmplsFrrConstProtectionType | read-create | current | Indicates type of the resource protection: linkProtection(1) indicates that this tunnel is setup to protect a particular link's resources. nodeProtection(2) in… |
| 1.3.6.1.2.1.10.166.2.1.1.1.5 | ColumnmplsFrrConstSetupPrio | read-create | current | Indicates the setup priority of the detour LSP or bypass tunnel. |
| 1.3.6.1.2.1.10.166.2.1.1.1.6 | ColumnmplsFrrConstHoldingPrio | read-create | current | Indicates the holding priority for detour LSP or bypass tunnel. |
| 1.3.6.1.2.1.10.166.2.1.1.1.7 | ColumnmplsFrrConstInclAnyAffinity | read-create | current | Indicates the include-any link constraint for the detour LSP or bypass tunnel. A link satisfies the include-any constraint if and only if the constraint is zer… |
| 1.3.6.1.2.1.10.166.2.1.1.1.8 | ColumnmplsFrrConstInclAllAffinity | read-create | current | Indicates the include-all link constraint for the detour LSP or bypass tunnel. A link satisfies the include-all constraint if and only if the link contains all… |
| 1.3.6.1.2.1.10.166.2.1.1.1.9 | ColumnmplsFrrConstExclAnyAffinity | read-create | current | Indicates the exclude-any link constraint for the detour LSP or bypass tunnel. A link satisfies the exclude-any constraint if and only if the link contains non… |
| 1.3.6.1.2.1.10.166.2.1.1.1.10 | ColumnmplsFrrConstHopLimit | read-create | current | |
| 1.3.6.1.2.1.10.166.2.1.1.1.11 | ColumnmplsFrrConstBandwidth | read-create | current | The maximum bandwidth specifically reserved for detour LSP or bypass tunnel, in units of thousands of bits per second (Kbps). Note that setting this value to 0… |
| 1.3.6.1.2.1.10.166.2.1.1.1.12 | ColumnmplsFrrConstStorageType | read-create | current | The storage type for this configuration entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.10.166.2.1.1.1.13 | ColumnmplsFrrConstRowStatus | read-create | current | This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modifie… |
| 1.3.6.1.2.1.10.166.2.1.2 | TablemplsFrrTunARHopTable | not-accessible | current | This table sparsely extends mplsTunnelARHopTable defined in the MPLS-TE-STD-MIB MIB module with fast-reroute objects. These objects specify the status of local… |
| 1.3.6.1.2.1.10.166.2.1.2.1 | RowmplsFrrTunARHopEntry | not-accessible | current | This entry contains fast-reroute protection status of a single protected tunnel hop. |
| 1.3.6.1.2.1.10.166.2.1.2.1.1 | ColumnmplsFrrTunARHopProtectType | read-only | current | This object indicates the protection type or types of the associated path hop object. Note that since this object is a BITS type, one, none or all of the bits … |
| 1.3.6.1.2.1.10.166.2.1.2.1.2 | ColumnmplsFrrTunARHopProtectTypeInUse | read-only | current | This object indicates the protection type or types that are currently in use by the associated path hop object. Note that since this object is a BITS type, one… |
| 1.3.6.1.2.1.10.166.2.2 | NodemplsFrrOne2OneObjects | |||
| 1.3.6.1.2.1.10.166.2.2.1 | TablemplsFrrOne2OnePlrTable | not-accessible | current | This table shows a list of protected TE tunnels with the corresponding protecting tunnel, as well as the PLR where the protecting tunnel that initiated the det… |
| 1.3.6.1.2.1.10.166.2.2.1.1 | RowmplsFrrOne2OnePlrEntry | not-accessible | current | An entry in this table represents a protected tunnel LSP together with its detour tunnel instance. An entry in this table is only created by an SNMP agent as i… |
| 1.3.6.1.2.1.10.166.2.2.1.1.1 | ColumnmplsFrrOne2OnePlrTunIdx | not-accessible | current | Uniquely identifies a tunnel between a pair of LSRs from the mplsTunnelEntry. |
| 1.3.6.1.2.1.10.166.2.2.1.1.2 | ColumnmplsFrrOne2OnePlrTunDetourInst | not-accessible | current | Uniquely identifies a detour instance of a tunnel from the mplsTunnelEntry. - lower 16 bits : protected tunnel instance - higher 16 bits: detour instance |
| 1.3.6.1.2.1.10.166.2.2.1.1.3 | ColumnmplsFrrOne2OnePlrTunIngrLSRId | not-accessible | current | The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protocol is rsvp(2) this object SHOULD contain the same … |
| 1.3.6.1.2.1.10.166.2.2.1.1.4 | ColumnmplsFrrOne2OnePlrTunEgrLSRId | not-accessible | current | Specifies the egress LSR ID of the protected tunnel instance. |
| 1.3.6.1.2.1.10.166.2.2.1.1.5 | ColumnmplsFrrOne2OnePlrId | not-accessible | current | This value represents the PLR that has initiated a detour LSP to protect a tunnel instance. This value is signalled via the DETOUR object defined in MPLS RSVP … |
| 1.3.6.1.2.1.10.166.2.2.1.1.6 | ColumnmplsFrrOne2OnePlrSenderAddrType | read-create | current | Denotes the address type of this detour instance's sender address. |
| 1.3.6.1.2.1.10.166.2.2.1.1.7 | ColumnmplsFrrOne2OnePlrSenderAddr | read-create | current | The IP address of the PLR which has initiated the detour LSP. The type of this address is determined by the value of the mplsFrrOne2OnePlrSenderAddrType object. |
| 1.3.6.1.2.1.10.166.2.2.1.1.8 | ColumnmplsFrrOne2OnePlrAvoidNAddrType | read-only | current | Denotes the address type of the node that this PLR tries to avoid. |
| 1.3.6.1.2.1.10.166.2.2.1.1.9 | ColumnmplsFrrOne2OnePlrAvoidNAddr | read-only | current | The IP address of the node that this PLR tries to avoid. The type of this address is determined by the value of the mplsFrrOne2OnePlrAvoidNAddrType object. Thi… |
| 1.3.6.1.2.1.10.166.2.2.2 | TablemplsFrrDetourTable | not-accessible | current | This table shows detour LSPs. |
| 1.3.6.1.2.1.10.166.2.2.2.1 | RowmplsFrrDetourEntry | not-accessible | current | An entry in this table represents a detour. An entry in this table is only created by an SNMP agent as instructed by an MPLS signaling protocol. |
| 1.3.6.1.2.1.10.166.2.2.2.1.1 | ColumnmplsFrrDetourActive | read-only | current | Indicates whether or not the main LSP has switched over to this detour LSP. This is only relevant for detours originated by this node. |
| 1.3.6.1.2.1.10.166.2.2.2.1.2 | ColumnmplsFrrDetourMerging | read-only | current | This value represents whether or not this detour is merged. This value MUST be set to none(1) if this detour is not merged. This value MUST be set to protected… |
| 1.3.6.1.2.1.10.166.2.2.2.1.3 | ColumnmplsFrrDetourMergedDetourInst | read-only | current | This value represents the instance of the detour with which this detour is merged. This object is only valid when mplsFrrDetourMerging is set to detour(3). MPL… |
| 1.3.6.1.2.1.10.166.2.3 | NodemplsFrrFacObjects | |||
| 1.3.6.1.2.1.10.166.2.3.1 | TablemplsFrrFacRouteDBTable | not-accessible | current | The mplsFrrDBTable provides information about the fast reroute database. Each entry belongs to a protected interface, protecting backup tunnel and protected tu… |
| 1.3.6.1.2.1.10.166.2.3.1.1 | RowmplsFrrFacRouteDBEntry | not-accessible | current | An entry in the mplsFrrDBTable represents a single protected LSP, protected by a backup tunnel on a specific protected interface, or if the interface index is … |
| 1.3.6.1.2.1.10.166.2.3.1.1.1 | ColumnmplsFrrFacRouteProtIfIdx | not-accessible | current | Uniquely identifies the interface configured for FRR protection. If this object is set to 0, this indicates that the remaining indexing combinations for this r… |
| 1.3.6.1.2.1.10.166.2.3.1.1.2 | ColumnmplsFrrFacRouteProtTunIdx | not-accessible | current | Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacRouteIfPr… |
| 1.3.6.1.2.1.10.166.2.3.1.1.3 | ColumnmplsFrrFacRouteBkupTunIdx | not-accessible | current | Uniquely identifies the mplsTunnelEntry primary index for the TE tunnel LSP being protected on the specified interface as specified in the mplsFrrFacRouteIfPro… |
| 1.3.6.1.2.1.10.166.2.3.1.1.4 | ColumnmplsFrrFacRouteBkupTunInst | not-accessible | current | Uniquely identifies the mplsTunnelEntry secondary index for the TE tunnel LSP being protected on the specified interface as specified in the mplsFrrFacRouteIfP… |
| 1.3.6.1.2.1.10.166.2.3.1.1.5 | ColumnmplsFrrFacRouteBkupTunIngrLSRId | not-accessible | current | Uniquely identifies the mplsTunnelEntry third index for the TE tunnel LSP being protected on the specified interface as specified in the mplsFrrFacRouteIfProtI… |
| 1.3.6.1.2.1.10.166.2.3.1.1.6 | ColumnmplsFrrFacRouteBkupTunEgrLSRId | not-accessible | current | Uniquely identifies the mplsTunnelEntry fourth index for the TE tunnel LSP being protected on the specified interface as specified in the mplsFrrFacRouteIfProt… |
| 1.3.6.1.2.1.10.166.2.3.1.1.7 | ColumnmplsFrrFacRouteDBNumProtTunOnIf | read-only | current | |
| 1.3.6.1.2.1.10.166.2.3.1.1.8 | ColumnmplsFrrFacRouteDBNumProtLspOnIf | read-only | current | The number of LSPs currently being protected on the specified interface. |
| 1.3.6.1.2.1.10.166.2.3.1.1.9 | ColumnmplsFrrFacRouteDBNumProtTun | read-only | current | The number of tunnels protected on this interface. |
| 1.3.6.1.2.1.10.166.2.3.1.1.10 | ColumnmplsFrrFacRouteDBProtTunStatus | read-only | current | Specifies the state of the protected tunnel. active This tunnel's label has been placed in the LFIB and is ready to be applied to incoming packets. ready - Thi… |
| 1.3.6.1.2.1.10.166.2.3.1.1.11 | ColumnmplsFrrFacRouteDBProtTunResvBw | read-only | current | |
| 1.3.6.1.2.1.10.166.3 | NodemplsFrrConformance | |||
| 1.3.6.1.2.1.10.166.3.1 | NodemplsFrrGroups | |||
| 1.3.6.1.2.1.10.166.3.1.1 | GroupmplsFrrScalarGroup | current | Objects that are required to gather fast reroute statistics. | |
| 1.3.6.1.2.1.10.166.3.1.2 | GroupmplsFrrConstGroup | current | Objects that are required to configure fast reroute constraints at the ingress LSR of the tunnel that requires fast reroute service. | |
| 1.3.6.1.2.1.10.166.3.1.3 | GroupmplsFrrTunARHopGroup | current | Objects that are required to present per hop fast-reroute protection status. | |
| 1.3.6.1.2.1.10.166.3.1.4 | GroupmplsFrrOne2OnePLRDetourGroup | current | Objects that are required to present the detour LSP information at the detour ingress, transit and egress LSRs. | |
| 1.3.6.1.2.1.10.166.3.1.5 | GroupmplsFrrOne2OnePlrGroup | current | Objects that are required to represent the FRR One-2-One PLR information. | |
| 1.3.6.1.2.1.10.166.3.1.6 | GroupmplsFrrFacRouteDBGroup | current | Objects that are required to represent the FRR Facility Route Database information. | |
| 1.3.6.1.2.1.10.166.3.1.7 | GroupmplsFrrNotifGroup | current | Objects that are required to represent FRR notifications. | |
| 1.3.6.1.2.1.10.166.3.2 | NodemplsFrrCompliances | |||
| 1.3.6.1.2.1.10.166.3.2.1 | CompliancemplsFrrModuleFullCompliance | current | Compliance statements for agents that support the MPLS-FRR-STD-MIB MIB module. | |
| 1.3.6.1.2.1.10.166.3.2.2 | CompliancemplsFrrModuleReadOnlyCompliance | read-only | current | Compliance statements for agents that support the MPLS FRR MIB. |