MPLS-FTN-MIB
50 objects
Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC xxxx; see the RFC itself for full legal notices. This MIB module contains managed object definitions for specifying FEC to NHLFE (FTN) mappings and corresponding performance for MPLS.
Imported Objects
| DIFFSERV-DSCP-TC | Dscp |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| MPLS-TC-MIB | mplsMIB |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus StorageType TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.9999.5 | IdentitymplsFTNMIB | Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC xxxx; see the RFC itself for full legal notices. This MIB module cont… | ||
| 1.3.6.1.2.1.10.9999.5.0 | NodemplsFTNNotifications | |||
| 1.3.6.1.2.1.10.9999.5.1 | NodemplsFTNObjects | |||
| 1.3.6.1.2.1.10.9999.5.1.1 | ScalarmplsFTNIndexNext | read-only | current | This object contains the next available valid value to be used for mplsFTNIndex when creating entries in the mplsFTNTable. When creating a new conceptual row (… |
| 1.3.6.1.2.1.10.9999.5.1.2 | ScalarmplsFTNTableLastChanged | read-only | current | Indicates the last time an entry was added, deleted or modified in mplsFTNTable. Management stations should consult this object to determine if mplsFTNTable re… |
| 1.3.6.1.2.1.10.9999.5.1.3 | TablemplsFTNTable | not-accessible | current | This table contains the currently defined FTN entries. This table allows FEC to NHLFE mappings to be specified. Each entry in this table defines a rule to be a… |
| 1.3.6.1.2.1.10.9999.5.1.3.1 | RowmplsFTNEntry | not-accessible | current | Each entry represents one FTN entry which defines a rule to compare incoming packets with and an action to be taken on matching packets. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.1 | ColumnmplsFTNIndex | not-accessible | current | This is the unique index for a conceptual row in mplsFTNTable. To create a new conceptual row in mplsFTNTable a Network Management Application SHOULD retrieve … |
| 1.3.6.1.2.1.10.9999.5.1.3.1.2 | ColumnmplsFTNRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application … |
| 1.3.6.1.2.1.10.9999.5.1.3.1.3 | ColumnmplsFTNDescr | read-create | current | The description of this FTN entry. Since the index for this table has no particular significance or meaning, this object should contain some meaningful text th… |
| 1.3.6.1.2.1.10.9999.5.1.3.1.4 | ColumnmplsFTNMask | read-create | current | This bit map indicates which of the fields described next, namely source address range, destination address range, source port range, destination port range, I… |
| 1.3.6.1.2.1.10.9999.5.1.3.1.5 | ColumnmplsFTNAddrType | read-create | current | This object determines the type of address contained in the source and destination address objects (mplsFTNSourceAddrMin, mplsFTNSourceAddrMax, mplsFTNDestAddr… |
| 1.3.6.1.2.1.10.9999.5.1.3.1.6 | ColumnmplsFTNSourceAddrMin | read-create | current | The lower end of the source address range. The type of this object is determined by the corresponding mplsFTNAddrType object. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.7 | ColumnmplsFTNSourceAddrMax | read-create | current | The upper end of the source address range. The type of this object is determined by the corresponding mplsFTNAddrType object. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.8 | ColumnmplsFTNDestAddrMin | read-create | current | The lower end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.9 | ColumnmplsFTNDestAddrMax | read-create | current | The higher end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.10 | ColumnmplsFTNSourcePortMin | read-create | current | The lower end of the source port range. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.11 | ColumnmplsFTNSourcePortMax | read-create | current | The higher end of the source port range |
| 1.3.6.1.2.1.10.9999.5.1.3.1.12 | ColumnmplsFTNDestPortMin | read-create | current | The lower end of the destination port range. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.13 | ColumnmplsFTNDestPortMax | read-create | current | The higher end of the destination port range. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.14 | ColumnmplsFTNProtocol | read-create | current | The contents of the IPv4 Protocol field or IPv6 next- header field. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.15 | ColumnmplsFTNDscp | read-create | current | The contents of the DSCP field. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.16 | ColumnmplsFTNActionType | read-create | current | The type of action to be taken on packets matching this FTN entry. |
| 1.3.6.1.2.1.10.9999.5.1.3.1.17 | ColumnmplsFTNActionPointer | read-create | current | If mplsFTNActionType is redirectLsp(2), then this object MUST contain zeroDotZero or point to a instance of mplsXCEntry indicating the LSP to redirect matching… |
| 1.3.6.1.2.1.10.9999.5.1.3.1.18 | ColumnmplsFTNStorageType | read-create | current | The storage type for this FTN entry. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in the row. |
| 1.3.6.1.2.1.10.9999.5.1.4 | ScalarmplsFTNMapTableLastChanged | read-only | current | Indicates the last time an entry was added, deleted or modified in mplsFTNMapTable. Management stations should consult this object to determine if the table re… |
| 1.3.6.1.2.1.10.9999.5.1.5 | TablemplsFTNMapTable | not-accessible | current | This table contains objects for mapping previously defined entries in mplsFTNTable to interfaces. This table provides the capability to activate or map FTN ent… |
| 1.3.6.1.2.1.10.9999.5.1.5.1 | RowmplsFTNMapEntry | not-accessible | current | Each entry indicates the application of a particular entry as defined in mplsFTNTable on an interface. The order of application of FTN entries on an interface … |
| 1.3.6.1.2.1.10.9999.5.1.5.1.1 | ColumnmplsFTNMapIndex | not-accessible | current | The interface index that this FTN entry is being applied to. A value of zero indicates an entry that is applied all interfaces. Entries mapped to an interface … |
| 1.3.6.1.2.1.10.9999.5.1.5.1.2 | ColumnmplsFTNMapPrevIndex | not-accessible | current | The index of the previous FTN entry that was applied to this interface. The special value zero indicates that this should be the first FTN entry in the list. |
| 1.3.6.1.2.1.10.9999.5.1.5.1.3 | ColumnmplsFTNMapCurrIndex | not-accessible | current | Index of the current FTN entry that is being applied to this interface. |
| 1.3.6.1.2.1.10.9999.5.1.5.1.5 | ColumnmplsFTNMapRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a conceptual row instance of mplsF… |
| 1.3.6.1.2.1.10.9999.5.1.5.1.6 | ColumnmplsFTNMapStorageType | read-create | current | The storage type for this entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in this row. |
| 1.3.6.1.2.1.10.9999.5.1.6 | TablemplsFTNPerfTable | not-accessible | current | This table contains performance statistics on FTN entries on a per-interface basis. |
| 1.3.6.1.2.1.10.9999.5.1.6.1 | RowmplsFTNPerfEntry | not-accessible | current | Each entry contains performance information for the specified interface and an FTN entry mapped to this interface. |
| 1.3.6.1.2.1.10.9999.5.1.6.1.1 | ColumnmplsFTNPerfIndex | not-accessible | current | The interface index of an interface that an FTN entry has been applied/mapped to. Each instance of this object corresponds to an instance of mplsFTNMapIndex. |
| 1.3.6.1.2.1.10.9999.5.1.6.1.2 | ColumnmplsFTNPerfCurrIndex | not-accessible | current | Index of an FTN entry that has being applied/mapped to the specified interface. Each instance of this object corresponds to an instance of mplsFTNMapCurrIndex. |
| 1.3.6.1.2.1.10.9999.5.1.6.1.3 | ColumnmplsFTNPerfMatchedPackets | read-only | current | Number of packets that matched the specified FTN entry if it is applied/mapped to the specified interface. Discontinuities in the value of this counter can occ… |
| 1.3.6.1.2.1.10.9999.5.1.6.1.4 | ColumnmplsFTNPerfMatchedOctets | read-only | current | Number of octets that matched the specified FTN entry if it is applied/mapped to the specified interface. Discontinuities in the value of this counter can occu… |
| 1.3.6.1.2.1.10.9999.5.1.6.1.5 | ColumnmplsFTNPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have … |
| 1.3.6.1.2.1.10.9999.5.2 | NodemplsFTNConformance | |||
| 1.3.6.1.2.1.10.9999.5.2.1 | NodemplsFTNGroups | |||
| 1.3.6.1.2.1.10.9999.5.2.1.1 | GroupmplsFTNRuleGroup | current | Collection of objects that implement MPLS FTN rules. | |
| 1.3.6.1.2.1.10.9999.5.2.1.2 | GroupmplsFTNMapGroup | current | Collection of objects that implement activation of MPLS FTN entries on interfaces. | |
| 1.3.6.1.2.1.10.9999.5.2.1.3 | GroupmplsFTNPerfGroup | current | Collection of objects providing MPLS FTN performance information. | |
| 1.3.6.1.2.1.10.9999.5.2.2 | NodemplsFTNCompliances | |||
| 1.3.6.1.2.1.10.9999.5.2.2.1 | CompliancemplsFTNModuleFullCompliance | read-only | current | Compliance statement for agents that provide full support for MPLS-FTN-MIB. |
| 1.3.6.1.2.1.10.9999.5.2.2.2 | CompliancemplsFTNModuleReadOnlyCompliance | not-accessible | current | Compliance requirement for implementations that only provide read-only support for MPLS-FTN-MIB. Such devices can then be monitored but cannot be configured us… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsFTNEntryIndex | Unsigned32 (1..4294967295) | current | Index for an entry in mplsFTNTable. |
| MplsFTNEntryIndexOrZero | Unsigned32 (0..4294967295) | current | Index for an entry in mplsFTNTable or the special value zero. The value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zer… |