MPLS-LDP-FRAME-RELAY-MIB
30 objects
Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFCXXX; see the RFC itself for full legal notices. This MIB contains managed object definitions for configuring and monitoring the Multiprotocol Label Switching (MPLS), Label Distribution Protocol (LDP), utilizing Frame Relay as the Layer 2 media.
Imported Objects
| FRAME-RELAY-DTE-MIB | DLCI |
| IF-MIB | InterfaceIndexOrZero |
| MPLS-LDP-MIB | mplsLdpEntityIndex mplsLdpEntityLdpId mplsLdpPeerLdpId |
| MPLS-TC-MIB | mplsMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.9999 | IdentitymplsLdpFrameRelayMIB | Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFCXXX; see the RFC itself for full legal notices. This MIB contains mana… | ||
| 1.3.6.1.2.1.10.9999.1 | NodemplsLdpFrameRelayObjects | |||
| 1.3.6.1.2.1.10.9999.1.1 | NodemplsLdpEntityFrameRelayObjects | |||
| 1.3.6.1.2.1.10.9999.1.1.1 | TablemplsLdpEntityFrameRelayTable | not-accessible | current | This table contains information about the Optional Parameters to specify what this Entity is going to specify for Frame Relay specific LDP Intialization Messag… |
| 1.3.6.1.2.1.10.9999.1.1.1.1 | RowmplsLdpEntityFrameRelayEntry | not-accessible | current | An entry in this table represents the Frame Relay optional parameters associated with the LDP entity. |
| 1.3.6.1.2.1.10.9999.1.1.1.1.1 | ColumnmplsLdpEntityFrameRelayIfIndexOrZero | read-create | current | This value represents either the InterfaceIndex of the 'ifLayer' where the Frame Relay Labels 'owned' by this entry were created, or 0 (zero). The value of zer… |
| 1.3.6.1.2.1.10.9999.1.1.1.1.2 | ColumnmplsLdpEntityFrameRelayMergeCap | read-create | current | This represents whether or not the Frame Relay merge capability is supported. This is the EXACT value for the Frame Relay Session Parameter, field M (for Frame… |
| 1.3.6.1.2.1.10.9999.1.1.1.1.3 | ColumnmplsLdpEntityFrameRelayLRComponents | read-create | current | Number of Label Range Components in the Initialization message. This also represents the number of entries in the mplsLdpEntityFrameRelayLRTable which correspo… |
| 1.3.6.1.2.1.10.9999.1.1.1.1.4 | ColumnmplsLdpEntityFrameRelayVcDirectionality | read-create | current | If the value of this object is 'bidirectional(0)', then the LSR supports the use of a given DLCI as a label for both directions independently. If the value of … |
| 1.3.6.1.2.1.10.9999.1.1.1.1.5 | ColumnmplsLdpEntityFrameRelayStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' MAY allow write-access to any columnar objects in the row, except for… |
| 1.3.6.1.2.1.10.9999.1.1.1.1.6 | ColumnmplsLdpEntityFrameRelayRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Chan… |
| 1.3.6.1.2.1.10.9999.1.1.2 | TablemplsLdpEntityFrameRelayLRTable | not-accessible | current | This table contains information about the Optional Parameters for the Frame Relay Session in the LDP Initialization Message, specifically it contains informati… |
| 1.3.6.1.2.1.10.9999.1.1.2.1 | RowmplsLdpEntityFrameRelayLREntry | not-accessible | current | An entry in this table represents the Frame Relay Label Range Component associated with the LDP entity. |
| 1.3.6.1.2.1.10.9999.1.1.2.1.1 | ColumnmplsLdpEntityFrameRelayLRMinDlci | not-accessible | current | The lower bound which is supported. This value should be the same as that in the Frame Relay Label Range Component's Minimum DLCI field. The value of zero is v… |
| 1.3.6.1.2.1.10.9999.1.1.2.1.2 | ColumnmplsLdpEntityFrameRelayLRMaxDlci | read-create | current | The upper bound which is supported. This value should be the same as that in the Frame Relay Label Range Component's Maximum DLCI field. |
| 1.3.6.1.2.1.10.9999.1.1.2.1.3 | ColumnmplsLdpEntityFrameRelayLRLen | read-create | current | This object specifies the length of the DLCI bits. This is the EXACT value for the Len field of the Frame Relay Label Range Component. The description from rfc… |
| 1.3.6.1.2.1.10.9999.1.1.2.1.4 | ColumnmplsLdpEntityFrameRelayLRStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' MAY allow write-access to any columnar objects in the row, except for… |
| 1.3.6.1.2.1.10.9999.1.1.2.1.5 | ColumnmplsLdpEntityFrameRelayLRRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Chan… |
| 1.3.6.1.2.1.10.9999.1.2 | NodemplsLdpFrameRelaySesObjects | |||
| 1.3.6.1.2.1.10.9999.1.2.1 | TablemplsLdpFrameRelaySesTable | not-accessible | current | A table of Frame Relay label range intersections between the LDP Entities and LDP Peers. Each row represents a single label range intersection. NOTE: this tabl… |
| 1.3.6.1.2.1.10.9999.1.2.1.1 | RowmplsLdpFrameRelaySesEntry | not-accessible | current | An entry in this table represents information on a single label range intersection between an LDP Entity and LDP Peer. The information contained in a row is re… |
| 1.3.6.1.2.1.10.9999.1.2.1.1.1 | ColumnmplsLdpFrameRelaySesMinDlci | not-accessible | current | The lower bound of DLCIs which are supported. The value of zero is a valid value for the minimum DLCI field of the label. |
| 1.3.6.1.2.1.10.9999.1.2.1.1.2 | ColumnmplsLdpFrameRelaySesMaxDlci | read-only | current | The upper bound of DLCIs which are supported. |
| 1.3.6.1.2.1.10.9999.1.2.1.1.3 | ColumnmplsLdpFrameRelaySesLen | read-only | current | This object specifies the DLCI bits. |
| 1.3.6.1.2.1.10.9999.2 | NodemplsLdpFrameRelayConformance | |||
| 1.3.6.1.2.1.10.9999.2.1 | NodemplsLdpFrameRelayGroups | |||
| 1.3.6.1.2.1.10.9999.2.1.1 | GroupmplsLdpFrameRelayGroup | current | Objects that apply to all MPLS LDP implementations over Frame Relay. | |
| 1.3.6.1.2.1.10.9999.2.2 | NodemplsLdpFrameRelayCompliances | |||
| 1.3.6.1.2.1.10.9999.2.2.1 | CompliancemplsLdpFrameRelayModuleFullCompliance | current | The Module is implemented with support for read-create and read-write. In other words, both monitoring and configuration are available when using this MODULE-C… | |
| 1.3.6.1.2.1.10.9999.2.2.2 | CompliancemplsLdpFrameRelayModuleReadOnlyCompliance | read-only | current | The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |