MULTIBRIDGE-MIB
89 objects
Newbridge's multi-BRIDGE MIB Module. for nodes which implements more than one bridge entity.
Imported Objects
| NNCGNI0001-SMI | nncExtensions |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.43 | IdentitynncExtMultiBridge | Newbridge's multi-BRIDGE MIB Module. for nodes which implements more than one bridge entity. | ||
| 1.3.6.1.4.1.123.3.43.1 | NodemBrdgBase | |||
| 1.3.6.1.4.1.123.3.43.1.1 | TablemBrdgBaseTable | not-accessible | current | This table contains scalar values defined under dot1dBase in BRIDGE-MIB. Rows cannot be added to nor deleted from this table. |
| 1.3.6.1.4.1.123.3.43.1.1.1 | RowmBrdgBaseEntry | not-accessible | current | A list of information for each bridge of the Node. |
| 1.3.6.1.4.1.123.3.43.1.1.1.1 | ColumnmBrdgBaseBridgeAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.123.3.43.1.1.1.2 | ColumnmBrdgBaseNumPorts | read-only | current | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.123.3.43.1.1.1.3 | ColumnmBrdgBaseType | read-only | current | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.123.3.43.1.2 | TablemBrdgBasePortTable | not-accessible | current | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. Rows can… |
| 1.3.6.1.4.1.123.3.43.1.2.1 | RowmBrdgBasePortEntry | not-accessible | current | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.123.3.43.1.2.1.1 | ColumnmBrdgBasePort | read-only | current | The port number of the port for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.1.2.1.2 | ColumnmBrdgBasePortIfIndex | read-only | current | The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port. |
| 1.3.6.1.4.1.123.3.43.1.2.1.3 | ColumnmBrdgBasePortCircuit | read-only | current | For a port which (potentially) has the same value of mBrdgBasePortIfIndex as another port on the same bridge, this object contains the name of an object instan… |
| 1.3.6.1.4.1.123.3.43.1.2.1.4 | ColumnmBrdgBasePortDelayExceededDiscards | read-only | current | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.123.3.43.1.2.1.5 | ColumnmBrdgBasePortMtuExceededDiscards | read-only | current | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.123.3.43.1.2.1.6 | ColumnmBrdgBasePortBridgeIndex | read-only | current | The bridge number for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.2 | NodemBrdgStp | |||
| 1.3.6.1.4.1.123.3.43.2.1 | TablemBrdgStpTable | not-accessible | current | This table contains scalar values defined under dot1dStp in BRIDGE-MIB. Rows cannot be added to nor deleted from this table. |
| 1.3.6.1.4.1.123.3.43.2.1.1 | RowmBrdgStpEntry | not-accessible | current | A list of information for each bridge of the Node. |
| 1.3.6.1.4.1.123.3.43.2.1.1.1 | ColumnmBrdgStpProtocolSpecification | read-only | current | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.123.3.43.2.1.1.2 | ColumnmBrdgStpPriority | read-write | current | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.4.1.123.3.43.2.1.1.3 | ColumnmBrdgStpTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.123.3.43.2.1.1.4 | ColumnmBrdgStpTopChanges | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.123.3.43.2.1.1.5 | ColumnmBrdgStpDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.123.3.43.2.1.1.6 | ColumnmBrdgStpRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.123.3.43.2.1.1.7 | ColumnmBrdgStpRootPort | read-only | current | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.123.3.43.2.1.1.8 | ColumnmBrdgStpMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.123.3.43.2.1.1.9 | ColumnmBrdgStpHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.123.3.43.2.1.1.10 | ColumnmBrdgStpHoldTime | read-only | current | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.123.3.43.2.1.1.11 | ColumnmBrdgStpForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.123.3.43.2.1.1.12 | ColumnmBrdgStpBridgeMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.123.3.43.2.1.1.13 | ColumnmBrdgStpBridgeHelloTime | read-write | current | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.123.3.43.2.1.1.14 | ColumnmBrdgStpBridgeForwardDelay | read-write | current | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.4.1.123.3.43.2.1.1.15 | ColumnmBrdgStpEnable | read-write | current | Specifies if this bridge entity has an instance of the Spanning Tree Protocol running. |
| 1.3.6.1.4.1.123.3.43.2.1.1.16 | ColumnmBrdgStpBridgeIndex | read-only | current | The bridge number for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.2.2 | TablemBrdgStpPortTable | not-accessible | current | A table that contains port-specific information for the Spanning Tree Protocol. Rows cannot be added to nor deleted from this table. |
| 1.3.6.1.4.1.123.3.43.2.2.1 | RowmBrdgStpPortEntry | not-accessible | current | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.123.3.43.2.2.1.1 | ColumnmBrdgStpPort | read-only | current | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.123.3.43.2.2.1.2 | ColumnmBrdgStpPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.123.3.43.2.2.1.3 | ColumnmBrdgStpPortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.123.3.43.2.2.1.4 | ColumnmBrdgStpPortEnable | read-write | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.123.3.43.2.2.1.5 | ColumnmBrdgStpPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.123.3.43.2.2.1.6 | ColumnmBrdgStpPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.123.3.43.2.2.1.7 | ColumnmBrdgStpPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.123.3.43.2.2.1.8 | ColumnmBrdgStpPortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.123.3.43.2.2.1.9 | ColumnmBrdgStpPortDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.123.3.43.2.2.1.10 | ColumnmBrdgStpPortForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.123.3.43.2.2.1.11 | ColumnmBrdgStpPortStatsTxBPDUCount | read-write | current | The total number of BPDU's sent on this port. Sets may only be done with a value of 0. |
| 1.3.6.1.4.1.123.3.43.2.2.1.12 | ColumnmBrdgStpPortStatsRxBPDUCount | read-write | current | The total number of BPDU's received on this port. Sets may only be done with a value of 0. |
| 1.3.6.1.4.1.123.3.43.2.2.1.13 | ColumnmBrdgStpPortBridgeIndex | read-only | current | The bridge number for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.3 | NodemBrdgTp | |||
| 1.3.6.1.4.1.123.3.43.3.1 | TablemBrdgTpTable | not-accessible | current | This table contains scalar values defined under dot1dTp in BRIDGE-MIB. Rows cannot be added to nor deleted from this table. |
| 1.3.6.1.4.1.123.3.43.3.1.1 | RowmBrdgTpEntry | not-accessible | current | A list of information for each bridge of the Node. |
| 1.3.6.1.4.1.123.3.43.3.1.1.1 | ColumnmBrdgTpLearnedEntryDiscards | read-only | current | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the… |
| 1.3.6.1.4.1.123.3.43.3.1.1.2 | ColumnmBrdgTpAgingTime | read-write | current | The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds. |
| 1.3.6.1.4.1.123.3.43.3.1.1.3 | ColumnmBrdgTpLearningEnable | read-write | current | Specifies if this bridge entity will learn new MAC addresses. |
| 1.3.6.1.4.1.123.3.43.3.1.1.4 | ColumnmBrdgTpFdbNumLearnedEntries | read-write | current | Returns the number of learned stations in the filtering database. Writing 0 clears all the entries (learned entries only). |
| 1.3.6.1.4.1.123.3.43.3.1.1.5 | ColumnmBrdgTpFdbNumEntries | read-write | current | Returns the number of stations (static and learned) in the filtering database. Writing 0 clears all the entries (static and learned). |
| 1.3.6.1.4.1.123.3.43.3.1.1.6 | ColumnmBrdgTpBridgeIndex | read-only | current | The bridge number for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.3.2 | TablemBrdgTpFdbTable | not-accessible | current | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.123.3.43.3.2.1 | RowmBrdgTpFdbEntry | not-accessible | current | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.123.3.43.3.2.1.1 | ColumnmBrdgTpFdbAddress | read-only | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.123.3.43.3.2.1.2 | ColumnmBrdgTpFdbPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of mBrdgTpFdbAdd… |
| 1.3.6.1.4.1.123.3.43.3.2.1.3 | ColumnmBrdgTpFdbStatus | read-only | current | The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the co… |
| 1.3.6.1.4.1.123.3.43.3.2.1.4 | ColumnmBrdgTpFdbBridgeIndex | read-only | current | The bridge number for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.3.3 | TablemBrdgTpPortTable | not-accessible | current | A table that contains information about every port that is associated with this transparent bridge. Rows cannot be added to nor deleted from this table. |
| 1.3.6.1.4.1.123.3.43.3.3.1 | RowmBrdgTpPortEntry | not-accessible | current | A list of information for each port of a transparent bridge. |
| 1.3.6.1.4.1.123.3.43.3.3.1.1 | ColumnmBrdgTpPort | read-only | current | The port number of the port for which this entry contains Transparent bridging management information. |
| 1.3.6.1.4.1.123.3.43.3.3.1.2 | ColumnmBrdgTpPortMaxInfo | read-only | current | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.4.1.123.3.43.3.3.1.3 | ColumnmBrdgTpPortInFrames | read-only | current | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.123.3.43.3.3.1.4 | ColumnmBrdgTpPortOutFrames | read-only | current | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.123.3.43.3.3.1.5 | ColumnmBrdgTpPortInDiscards | read-only | current | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.4.1.123.3.43.3.3.1.6 | ColumnmBrdgTpPortBridgeIndex | read-only | current | The bridge number for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.4 | NodemBrdgStatic | |||
| 1.3.6.1.4.1.123.3.43.4.1 | TablemBrdgStaticTable | not-accessible | current | A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from … |
| 1.3.6.1.4.1.123.3.43.4.1.1 | RowmBrdgStaticEntry | not-accessible | current | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.123.3.43.4.1.1.1 | ColumnmBrdgStaticAddress | read-write | current | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group addres… |
| 1.3.6.1.4.1.123.3.43.4.1.1.2 | ColumnmBrdgStaticReceivePort | read-write | current | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z… |
| 1.3.6.1.4.1.123.3.43.4.1.1.3 | ColumnmBrdgStaticAllowedToGoTo | read-write | current | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.4.1.123.3.43.4.1.1.4 | ColumnmBrdgStaticStatus | read-write | current | This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it … |
| 1.3.6.1.4.1.123.3.43.4.1.1.7 | ColumnmBrdgStaticBridgeIndex | read-only | current | The bridge number for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.5 | NodemBrdgConfig | |||
| 1.3.6.1.4.1.123.3.43.5.1 | TablemBrdgConfigTable | not-accessible | current | This table contains attributes for the different bridges Rows cannot be added to nor deleted from this table. |
| 1.3.6.1.4.1.123.3.43.5.1.1 | RowmBrdgConfigEntry | not-accessible | current | A list of information for each bridge of the Node. |
| 1.3.6.1.4.1.123.3.43.5.1.1.1 | ColumnmBrdgConfigBridgeIndex | read-only | current | The bridge number for which this entry contains bridge management information. |
| 1.3.6.1.4.1.123.3.43.5.1.1.2 | ColumnmBrdgConfigBridgeName | read-write | current | The name given to this bridge entity. |
| 1.3.6.1.4.1.123.3.43.5.1.1.3 | ColumnmBrdgConfigBridgePeakRate | read-write | current | The maximum rate (in percentage) at which data is accepted from ports on this bridge entity. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| Timeout | INTEGER |