MX25-OPT-MIB
121 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.4 | Nodecdx6500PPCTMX25PortTables | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.4.1 | Tablecdx6500PPCTMX25PortTable | not-accessible | mandatory | All of the common configuration parameters relevant to the MX.25 port table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.1.1 | Rowcdx6500PPCTMX25PortEntry | not-accessible | mandatory | A row of MX.25 Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.1.1.1 | Columncdx6500mx25pCfgPortNum | read-only | mandatory | MX25 Port Number. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.1.1.2 | Columncdx6500mx25pSubType | read-only | mandatory | This is the mode in which this MX25 port will run. newvalMaster : same functionality as 'master', new enumeration added for RFC1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2 | Tablecdx6500PPCTMX25MPortTable | not-accessible | mandatory | All of the configuration parameters relevant to the MX.25 Master port table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1 | Rowcdx6500PPCTMX25MPortEntry | not-accessible | mandatory | A row of MX.25 Master Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.1 | Columncdx6500mx25mpCfgPortNum | read-only | mandatory | MX25 Port Number. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.2 | Columncdx6500mx25mpSubType | read-only | mandatory | This is the mode in which this MX25 port will run. newvalMaster : same functionality as 'master', new enumeration added for RFC1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.3 | Columncdx6500mx25mpClockSource | read-only | mandatory | int - internal clock source. ext - external clock source. newvalInt - same functionality as 'int', new enumeration added for RFc1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.4 | Columncdx6500mx25mpClockSpeed | read-only | mandatory | This is the speed of the port in bits per second, when using internal clocking. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.5 | Columncdx6500mx25mpStationCnt | read-only | mandatory | The number of slave stations on the MX25 line. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.6 | Columncdx6500mx25mpPollTimer | read-only | mandatory | Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds … |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.7 | Columncdx6500mx25mpPollPeriod | read-only | mandatory | Time in milliseconds between polls when no data is exchanged. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.8 | Columncdx6500mx25mpTries | read-only | mandatory | Maximum number of attempts to complete a transmission. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.9 | Columncdx6500mx25mpRestartTimer | read-only | mandatory | Restart-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.10 | Columncdx6500mx25mpResetTimer | read-only | mandatory | Reset-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.11 | Columncdx6500mx25mpCallTimer | read-only | mandatory | Call-Request timeout timer in seconds. If timer expires, call is cleared. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.12 | Columncdx6500mx25mpClearTimer | read-only | mandatory | Clear-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.13 | Columncdx6500mx25mpPortControl | read-only | mandatory | Specify any of the following port control options: NONE - no option specified. MB - raise Pin 22 when the port becomes disabled. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.14 | Columncdx6500mx25mpTXEncoding | read-only | mandatory | This is the data encoding used on the MX25 link. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz : same functionality as 'nrz', new enu… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.15 | Columncdx6500mx25mpElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.16 | Columncdx6500mx25mpV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.17 | Columncdx6500mx25mpHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3 | Tablecdx6500PPCTMX25SPortTable | not-accessible | mandatory | All of the configuration parameters relevant to the MX.25 Slave port table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1 | Rowcdx6500PPCTMX25SPortEntry | not-accessible | mandatory | A row of MX.25 Slave Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.1 | Columncdx6500mx25spCfgPortNum | read-only | mandatory | MX25 Port Number. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.2 | Columncdx6500mx25spSubType | read-only | mandatory | This is the mode in which this MX25 port will run. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.3 | Columncdx6500mx25spClockSource | read-only | mandatory | int - internal clock source. ext - external clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.4 | Columncdx6500mx25spClockSpeed | read-only | mandatory | This is the speed of the port in bits per second, when using internal clocking. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.5 | Columncdx6500mx25spStationAddress | read-only | mandatory | The station address on the multidrop line. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.6 | Columncdx6500mx25spPVCChannels | read-only | mandatory | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and cons… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.7 | Columncdx6500mx25spStartingPVC | read-only | mandatory | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.8 | Columncdx6500mx25spSVCChannels | read-only | mandatory | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consis… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.9 | Columncdx6500mx25spStartingSVC | read-only | mandatory | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.10 | Columncdx6500mx25spPollTimer | read-only | mandatory | Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds … |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.11 | Columncdx6500mx25spTries | read-only | mandatory | Maximum number of attempts to complete a transmission. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.12 | Columncdx6500mx25spFrameWinSize | read-only | mandatory | Frame level window size must be set to the same value in devices at each end of the link. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.13 | Columncdx6500mx25spPacketWinSize | read-only | mandatory | Packet level window size must be set to the same value in devices at each end of the link. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.14 | Columncdx6500mx25spRestartTimer | read-only | mandatory | Restart-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.15 | Columncdx6500mx25spResetTimer | read-only | mandatory | Reset-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.16 | Columncdx6500mx25spCallTimer | read-only | mandatory | Call-Request timeout timer in seconds. If timer expires, call is cleared. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.17 | Columncdx6500mx25spClearTimer | read-only | mandatory | Clear-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.18 | Columncdx6500mx25spMX25Options | read-only | mandatory | Select options on this MX.25 port as follows: NONE - no option specified. HOLD - hold calls over link restart. CUG - check closed user group; otherwise, CUG pa… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.19 | Columncdx6500mx25spRCDestination | read-only | mandatory | All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to rout… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.20 | Columncdx6500mx25spCUG | read-only | mandatory | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except (e.g. 12,34,56,09,02,03 ). 00-9… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.21 | Columncdx6500mx25spBillingRecords | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for R… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.22 | Columncdx6500mx25spPortControl | read-only | mandatory | Specify any of the following port control options: NONE - no option specified. MB - raise Pin 22 when the port becomes disabled. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.23 | Columncdx6500mx25spTXEncoding | read-only | mandatory | This is the data encoding used on the MX25 link. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz - same functionality as 'nrz', new enu… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.24 | Columncdx6500mx25spUpperQueue | read-only | mandatory | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.25 | Columncdx6500mx25spLowerQueue | read-only | mandatory | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel. |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.26 | Columncdx6500mx25spElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.27 | Columncdx6500mx25spV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.28 | Columncdx6500mx25spHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.2.1.3 | Nodecdx6500PCTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.3.1 | Tablecdx6500SPCTMX25StationTable | not-accessible | mandatory | All of the configuration parameters relevant to the MX.25 station table. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1 | Rowcdx6500SPCTMX25StationEntry | not-accessible | mandatory | A row of MX.25 station configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.1 | Columncdx6500mx25sCfgPortNum | read-only | mandatory | MX25 Port Number. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.2 | Columncdx6500mx25sCfgStationNum | read-only | mandatory | The number of the controller on the multidrop line. Also used for routing purposes. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.3 | Columncdx6500mx25sStationAddress | read-only | mandatory | The station address on the multidrop line. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.4 | Columncdx6500mx25sPVCChannels | read-only | mandatory | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and cons… |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.5 | Columncdx6500mx25sStartingPVC | read-only | mandatory | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.6 | Columncdx6500mx25sSVCChannels | read-only | mandatory | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consis… |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.7 | Columncdx6500mx25sStartingSVC | read-only | mandatory | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.8 | Columncdx6500mx25sFrameWinSize | read-only | mandatory | Frame level window size must be set to the same value in devices at each end of the link. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.9 | Columncdx6500mx25sPacketWinSize | read-only | mandatory | Packet level window size must be set to the same value in devices at each end of the link. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.10 | Columncdx6500mx25sMX25Options | read-only | mandatory | Select options on this MX.25 port as follows: NONE - no option specified HOLD - hold calls over link restart CUG - check closed user group; otherwise, CUG pass… |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.11 | Columncdx6500mx25sRCDestination | read-only | mandatory | All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to rout… |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.12 | Columncdx6500mx25sCUG | read-only | mandatory | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except (e.g. 12,34,56,09,02,03). 00-99… |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.13 | Columncdx6500mx25sBillingRecords | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for R… |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.14 | Columncdx6500mx25sUpperQueue | read-only | mandatory | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel. |
| 1.3.6.1.4.1.449.2.1.2.1.3.1.1.15 | Columncdx6500mx25sLowerQueue | read-only | mandatory | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel. |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.4 | Tablecdx6500PPSTMX25PortTable | not-accessible | mandatory | All of the statistics parameters relevant to the MX25 Port table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1 | Rowcdx6500PPSTMX25PortEntry | not-accessible | mandatory | A row of MX25 Port statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.1 | Columncdx6500mx25pStatsPortNum | read-only | mandatory | Number of the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.2 | Columncdx6500mx25pPortStatus | read-only | mandatory | Status of this port : Up - Port is active. Down - Port Is inactive. Disabled - An operator has disabled the port. Busy Out - an operator has busied out the por… |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.3 | Columncdx6500mx25pPortSpeed | read-only | mandatory | This is the speed of the port when Clock=Int; this is the detected clock speed if Clock=Ext. If Port Speed is 0, Clock=Ext but clocking is not being received f… |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.4 | Columncdx6500mx25pCharInTotal | read-only | mandatory | Number of characters received by the port since the last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.5 | Columncdx6500mx25pCharOutTotal | read-only | mandatory | Number of characters sent by the port since the last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.6 | Columncdx6500mx25pCharsInPerSec | read-only | mandatory | Summary of the characters being received over the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.7 | Columncdx6500mx25pCharsOutPerSec | read-only | mandatory | Summary of the characters being sent over the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.8 | Columncdx6500mx25pFrameInTotal | read-only | mandatory | Number of frames received by the port since the last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.9 | Columncdx6500mx25pFrameOutTotal | read-only | mandatory | Number of frames sent by the port since the last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.10 | Columncdx6500mx25pFramesInPerSec | read-only | mandatory | Summary of the frames being received over the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.4.1.11 | Columncdx6500mx25pFramesOutPerSec | read-only | mandatory | Summary of the frames being sent over the port. |
| 1.3.6.1.4.1.449.2.1.3.1.3 | Nodecdx6500PSTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.3.1 | Tablecdx6500SPSTMX25StationTable | not-accessible | mandatory | All of the statistics parameters relevant to the MX25 Station table. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1 | Rowcdx6500SPSTMX25StationEntry | not-accessible | mandatory | A row of MX25 Station statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.1 | Columncdx6500mx25sStatsPortNum | read-only | mandatory | Number of the port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.2 | Columncdx6500mx25sStatsStationNum | read-only | mandatory | Station reference number. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.3 | Columncdx6500mx25sStatsStnAddr | read-only | mandatory | Configured station address. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.4 | Columncdx6500mx25sCharInTotal | read-only | mandatory | Number of characters received by the port since the last node, port, or statistics reset |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.5 | Columncdx6500mx25sCharOutTotal | read-only | mandatory | Number of characters sent by the port since the last node, port, or statistics reset |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.6 | Columncdx6500mx25sCharsInPerSec | read-only | mandatory | Summary of the characters being received over the port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.7 | Columncdx6500mx25sCharsOutPerSec | read-only | mandatory | Summary of the characters being sent over the port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.8 | Columncdx6500mx25sFrameInTotal | read-only | mandatory | Number of frames received by the port since the last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.9 | Columncdx6500mx25sFrameOutTotal | read-only | mandatory | Number of frames sent by the port since the last node, port, or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.10 | Columncdx6500mx25sFramesInPerSec | read-only | mandatory | Summary of the frames being received over the port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.11 | Columncdx6500mx25sFramesOutPerSec | read-only | mandatory | Summary of the frames being sent over the port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.1.1.12 | Columncdx6500mx25sCallCount | read-only | mandatory | Current number of calls. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.6 | Nodecdx6500ContMX25 | |||
| 1.3.6.1.4.1.449.2.1.4.6.1 | Tablecdx6500ContMX25StationTable | not-accessible | mandatory | All of the control parameters relevant to the MX25 Station table. |
| 1.3.6.1.4.1.449.2.1.4.6.1.1 | Rowcdx6500ContMX25StationEntry | not-accessible | mandatory | A row of MX25 Station Control parameters. |
| 1.3.6.1.4.1.449.2.1.4.6.1.1.1 | Columncdx6500mx25sContPortNum | not-accessible | mandatory | MX25 Port Number. |
| 1.3.6.1.4.1.449.2.1.4.6.1.1.2 | Columncdx6500mx25sContStationNum | not-accessible | mandatory | MX25 Station Number. |
| 1.3.6.1.4.1.449.2.1.4.6.1.1.3 | Columncdx6500mx25sContBootStation | write-only | mandatory | Boots the specified MX25 station. boot - Boot Station. noBoot - Do not boot Station. |
| 1.3.6.1.4.1.449.2.1.4.6.1.1.4 | Columncdx6500mx25sContDisableStation | write-only | mandatory | Disables the specified MX25 station. disable - Disable Station. noDisable - Do not disable Station. |
| 1.3.6.1.4.1.449.2.1.4.6.1.1.5 | Columncdx6500mx25sContEnableStation | write-only | mandatory | Enables the specified MX25 station. enable - Enable Station. noEnable - Do not enable Station. |
| 1.3.6.1.4.1.449.2.1.4.6.1.1.6 | Columncdx6500mx25sContBusyOutStation | write-only | mandatory | Busy outs the specified MX25 station. busyOut - Busyout Station. noBusyOut - Do not busyout Station. |
| 1.3.6.1.4.1.449.2.1.4.6.1.1.7 | Columncdx6500mx25sContResetStnStats | write-only | mandatory | Busy outs the specified MX25 station. reset - Reset Station Statistics. noReset - Do not reset Station Statistics. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |