NETEXEC-MIB
311 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.466 | Nodetylink | |||
| 1.3.6.1.4.1.466.6 | Nodenetexec | |||
| 1.3.6.1.4.1.466.6.1 | Nodedsucsu | |||
| 1.3.6.1.4.1.466.6.1.0 | NodedsucsuTrap | A dsucsuTrap trap signifies that the sending node had its `dsucsuAlarmType` variable modified. | ||
| 1.3.6.1.4.1.466.6.1.1 | TabledsucsuSysTable | not-accessible | mandatory | A list of system level attributes describing the addressed node. |
| 1.3.6.1.4.1.466.6.1.1.1 | RowdsucsuSysEntry | not-accessible | mandatory | System Object for a DSU/CSU |
| 1.3.6.1.4.1.466.6.1.1.1.1 | ColumndsucsuSysSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.1.1.2 | ColumndsucsuSysNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.1.1.3 | ColumndsucsuSysName | read-only | mandatory | The unique name of the node accessed |
| 1.3.6.1.4.1.466.6.1.1.1.4 | ColumndsucsuSysType | read-only | mandatory | A desciption of the system model: ie. ONS400, FNS400, ONS1000X, BLACK BOX FT1-4 |
| 1.3.6.1.4.1.466.6.1.1.1.5 | ColumndsucsuSysSoftRev | read-only | mandatory | Displays the Software Revision of the accessed node. |
| 1.3.6.1.4.1.466.6.1.1.1.6 | ColumndsucsuSysHardRev | read-only | mandatory | Displays the Hardware Revision of the accessed node. |
| 1.3.6.1.4.1.466.6.1.1.1.7 | ColumndsucsuSysNumChan | read-only | mandatory | The number of channels that are installed on the node. |
| 1.3.6.1.4.1.466.6.1.2 | TabledsucsuCfgNetTable | not-accessible | mandatory | Network Line Configuration |
| 1.3.6.1.4.1.466.6.1.2.1 | RowdsucsuCfgNetEntry | not-accessible | mandatory | Configuration Object for a DSU/CSU |
| 1.3.6.1.4.1.466.6.1.2.1.1 | ColumndsucsuCfgNetSlot | read-only | mandatory | The NEST slot to which the TyLink card is attached. |
| 1.3.6.1.4.1.466.6.1.2.1.2 | ColumndsucsuCfgNetNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.2.1.3 | ColumndsucsuCfgNetIndex | read-only | mandatory | The network index. |
| 1.3.6.1.4.1.466.6.1.2.1.4 | ColumndsucsuCfgNetInterface | read-write | mandatory | The interface type for 3000N. For a T1 line, NETWORK or DSX-1 is valid. |
| 1.3.6.1.4.1.466.6.1.2.1.5 | ColumndsucsuCfgNetType | read-write | mandatory | The aggregate line type. |
| 1.3.6.1.4.1.466.6.1.2.1.6 | ColumndsucsuCfgNetCoding | read-write | mandatory | The encoding scheme for the line. For a T1 line, AMI and B8ZS are valid. For an E1 line, AMI and HDB3 are valid. |
| 1.3.6.1.4.1.466.6.1.2.1.7 | ColumndsucsuCfgNetClockSource | read-write | mandatory | The aggregate timing for the addressed node. |
| 1.3.6.1.4.1.466.6.1.2.1.8 | ColumndsucsuCfgNetCsuEnable | read-write | mandatory | Enable/Disable Internal CSU. |
| 1.3.6.1.4.1.466.6.1.2.1.9 | ColumndsucsuCfgNetCsuLBO | read-write | mandatory | The setting of the Line Buildout switch. Setting must be db_0 if network interface is DSX-1. |
| 1.3.6.1.4.1.466.6.1.2.1.10 | ColumndsucsuCfgNetCsuDensity | read-write | mandatory | The setting of the one stuffing option. Inserts a 1 into the 8th, 16th, or 64th bit position (depending on the selection) if the previous 7 bits were 0's. |
| 1.3.6.1.4.1.466.6.1.2.1.11 | ColumndsucsuCfgNetRateMultiples | read-write | mandatory | The channel rate multiples for each of the ports. |
| 1.3.6.1.4.1.466.6.1.2.1.12 | ColumndsucsuCfgNetOutputPulse | read-write | mandatory | The distance to the CSU in feet. |
| 1.3.6.1.4.1.466.6.1.2.1.13 | ColumndsucsuCfgNetTs0 | read-write | mandatory | The E1 Timeslot 0 value. |
| 1.3.6.1.4.1.466.6.1.2.1.14 | ColumndsucsuCfgNetTs16 | read-write | mandatory | The E1 Timeslot 16 value. Valid values are data and multiframe alignment. |
| 1.3.6.1.4.1.466.6.1.4 | TabledsucsuCfgDteChanTable | not-accessible | mandatory | DTE Channel Configuration |
| 1.3.6.1.4.1.466.6.1.4.1 | RowdsucsuCfgDteChanEntry | not-accessible | mandatory | DTE Channel Configuration Object for a DSU/CSU |
| 1.3.6.1.4.1.466.6.1.4.1.1 | ColumndsucsuCfgDteChanSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.4.1.2 | ColumndsucsuCfgDteChanNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.4.1.3 | ColumndsucsuCfgDteChanIndex | read-only | mandatory | The channel index. |
| 1.3.6.1.4.1.466.6.1.4.1.4 | ColumndsucsuCfgDteChanType | read-write | mandatory | The Dte channel type. |
| 1.3.6.1.4.1.466.6.1.4.1.5 | ColumndsucsuCfgDteChanRate | read-write | mandatory | The Data rate in kilobits per second. The rate is dependent on the setting of the Aggregate DTE channel multiples. |
| 1.3.6.1.4.1.466.6.1.4.1.6 | ColumndsucsuCfgDteChanEncoding | read-write | mandatory | The Channel encoding. |
| 1.3.6.1.4.1.466.6.1.4.1.7 | ColumndsucsuCfgDteChanStartDs0 | read-write | mandatory | The starting DS0 for the addressed channel's data. |
| 1.3.6.1.4.1.466.6.1.4.1.8 | ColumndsucsuCfgDteChanCtrlSignal | read-write | mandatory | The control signal state. |
| 1.3.6.1.4.1.466.6.1.4.1.9 | ColumndsucsuCfgDteChanTiming | read-write | mandatory | The DTE channel Timing. |
| 1.3.6.1.4.1.466.6.1.4.1.10 | ColumndsucsuCfgDteChanClockInvert | read-write | mandatory | The DTE channel Clock Invert setting. |
| 1.3.6.1.4.1.466.6.1.4.1.11 | ColumndsucsuCfgDteChanDataInvert | read-write | mandatory | The DTE channel Data Invert setting. |
| 1.3.6.1.4.1.466.6.1.5 | TabledsucsuCfgFrmChanTable | not-accessible | mandatory | Framed Channel Configuration |
| 1.3.6.1.4.1.466.6.1.5.1 | RowdsucsuCfgFrmChanEntry | not-accessible | mandatory | Framed Channel Configuration Object for a DSU/CSU |
| 1.3.6.1.4.1.466.6.1.5.1.1 | ColumndsucsuCfgFrmChanSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.5.1.2 | ColumndsucsuCfgFrmChanNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.5.1.3 | ColumndsucsuCfgFrmChanIndex | read-only | mandatory | The channel index. |
| 1.3.6.1.4.1.466.6.1.5.1.4 | ColumndsucsuCfgFrmChanType | read-only | mandatory | The framed channel type. |
| 1.3.6.1.4.1.466.6.1.5.1.5 | ColumndsucsuCfgFrmChanNumDs0 | read-write | mandatory | The number of DS0's on the network side. |
| 1.3.6.1.4.1.466.6.1.5.1.6 | ColumndsucsuCfgFrmChanEncoding | read-write | mandatory | The channel line code. |
| 1.3.6.1.4.1.466.6.1.5.1.7 | ColumndsucsuCfgFrmChanStartDs0 | read-write | mandatory | The starting DS0 on the network side. |
| 1.3.6.1.4.1.466.6.1.5.1.8 | ColumndsucsuCfgFrmChanDteStartDs0 | read-write | mandatory | The starting DS0 on the framed channel. |
| 1.3.6.1.4.1.466.6.1.5.1.9 | ColumndsucsuCfgFrmChanMapping | read-write | mandatory | The Framed channel Mapping. |
| 1.3.6.1.4.1.466.6.1.5.1.10 | ColumndsucsuCfgFrmChanDs0Type | read-write | mandatory | The Framed channel DS0 Type. |
| 1.3.6.1.4.1.466.6.1.5.1.11 | ColumndsucsuCfgFrmChanFrameType | read-write | mandatory | The Framed channel Frame Type. |
| 1.3.6.1.4.1.466.6.1.5.1.12 | ColumndsucsuCfgFrmChanOutputPulse | read-write | mandatory | The cabling distance from the PBX to the PBX channel port in feet. |
| 1.3.6.1.4.1.466.6.1.5.1.13 | ColumndsucsuCfgFrmChanNetMapping | read-write | mandatory | The Network Ds0 Mapping. |
| 1.3.6.1.4.1.466.6.1.7 | TabledsucsuConfigSupTable | not-accessible | mandatory | Inband Supervisory Channel Configuration |
| 1.3.6.1.4.1.466.6.1.7.1 | RowdsucsuConfigSupEntry | not-accessible | mandatory | Inband Supervisory Configuration Object for a DSU/CSU |
| 1.3.6.1.4.1.466.6.1.7.1.1 | ColumndsucsuConfigSupSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.7.1.2 | ColumndsucsuConfigSupNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.7.1.3 | ColumndsucsuConfigSupIndex | read-only | mandatory | The Supervisory channel index. Index 1 refers to supervisory channel A. Index 2 refers to supervisory channel B. |
| 1.3.6.1.4.1.466.6.1.7.1.4 | ColumndsucsuConfigSupDs0 | read-write | mandatory | The DS0 to place the Supervisory channel in. |
| 1.3.6.1.4.1.466.6.1.8 | TabledsucsuCfgSupAuxTable | not-accessible | mandatory | Auxillary Supervisory Channel Configuration |
| 1.3.6.1.4.1.466.6.1.8.1 | RowdsucsuCfgSupAuxEntry | not-accessible | mandatory | Auxilary Supervisory Configuration Object for a DSU/CSU |
| 1.3.6.1.4.1.466.6.1.8.1.1 | ColumndsucsuCfgSupAuxSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.8.1.2 | ColumndsucsuCfgSupAuxNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.8.1.3 | ColumndsucsuCfgSupAuxIndex | read-only | mandatory | Auxillary Supervisory Channel Configuration Index Index 1 refers to FDL supervisory on PORT 1. Index 2 refers to FDL supervisory on PORT 2. |
| 1.3.6.1.4.1.466.6.1.8.1.4 | ColumndsucsuCfgSupAuxFdl | read-write | mandatory | Places the supervisory link bits within the Facility Data Link bits of the Extended Superframe. |
| 1.3.6.1.4.1.466.6.1.9 | TabledsucsuActvConfTable | not-accessible | mandatory | Activate a stored configuration on the selected node. |
| 1.3.6.1.4.1.466.6.1.9.1 | RowdsucsuActvConfEntry | not-accessible | mandatory | An activate configuration entry. |
| 1.3.6.1.4.1.466.6.1.9.1.1 | ColumndsucsuActvConfSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.9.1.2 | ColumndsucsuActvConfNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.9.1.3 | ColumndsucsuActvConfIndex | write-only | mandatory | Activate one of the four stored configurations. |
| 1.3.6.1.4.1.466.6.1.10 | TabledsucsuEventDesTable | not-accessible | mandatory | Table of event destinations. Events or alarms detected by a node can be reported to up to two destinations. The operator can set or clear either or both of the… |
| 1.3.6.1.4.1.466.6.1.10.1 | RowdsucsuEventDesEntry | not-accessible | mandatory | Entry in the table of event destinations. |
| 1.3.6.1.4.1.466.6.1.10.1.1 | ColumndsucsuEventDesSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.10.1.2 | ColumndsucsuEventDesNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.10.1.3 | ColumndsucsuEventNameIndx | read-only | mandatory | The unique name of the node accessed. |
| 1.3.6.1.4.1.466.6.1.10.1.4 | ColumndsucsuEventDesName1 | read-write | mandatory | The name of the node/PC where the alarms will be sent to. |
| 1.3.6.1.4.1.466.6.1.10.1.5 | ColumndsucsuEventDesName2 | read-write | mandatory | The name of the alternate node/PC where the alarms will be sent to. |
| 1.3.6.1.4.1.466.6.1.10.1.6 | ColumndsucsuEventClrDest | write-only | mandatory | Clears the destination(s) for the reporting of alarms. |
| 1.3.6.1.4.1.466.6.1.11 | TabledsucsuCfgMaintTable | not-accessible | mandatory | Maint. Port Configuration |
| 1.3.6.1.4.1.466.6.1.11.1 | RowdsucsuCfgMaintEntry | not-accessible | mandatory | Maint. Port Configuration Object |
| 1.3.6.1.4.1.466.6.1.11.1.1 | ColumndsucsuCfgMaintSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.11.1.2 | ColumndsucsuCfgMaintNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.11.1.3 | ColumndsucsuCfgMaintChanType | read-write | mandatory | The type of data passed over the Maint. port. |
| 1.3.6.1.4.1.466.6.1.11.1.4 | ColumndsucsuCfgMaintFlowCtrl | read-write | mandatory | Flow Control for the Maint. port. |
| 1.3.6.1.4.1.466.6.1.11.1.5 | ColumndsucsuCfgMaintStopBits | read-write | mandatory | Number of Stopbits for the Maint. port. |
| 1.3.6.1.4.1.466.6.1.11.1.6 | ColumndsucsuCfgMaintParity | read-write | mandatory | Parity for the Maint. port. |
| 1.3.6.1.4.1.466.6.1.11.1.7 | ColumndsucsuCfgMaintDataBits | read-write | mandatory | Databits for the Maint. port. |
| 1.3.6.1.4.1.466.6.1.11.1.8 | ColumndsucsuCfgMaintBaud | read-write | mandatory | Baud rate for the Maint. port. |
| 1.3.6.1.4.1.466.6.1.12 | TabledsucsuCfgCommTable | not-accessible | mandatory | Communication Port Configuration |
| 1.3.6.1.4.1.466.6.1.12.1 | RowdsucsuCfgCommEntry | not-accessible | mandatory | Communication Port Configuration Object |
| 1.3.6.1.4.1.466.6.1.12.1.1 | ColumndsucsuCfgCommSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.12.1.2 | ColumndsucsuCfgCommNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.12.1.3 | ColumndsucsuCfgCommChanType | read-write | mandatory | The type of data passed over the Communication port. |
| 1.3.6.1.4.1.466.6.1.12.1.4 | ColumndsucsuCfgCommFlowCtrl | read-write | mandatory | Flow Control for the Communication port. |
| 1.3.6.1.4.1.466.6.1.12.1.5 | ColumndsucsuCfgCommStopBits | read-write | mandatory | Number of Stopbits for the Communication port. |
| 1.3.6.1.4.1.466.6.1.12.1.6 | ColumndsucsuCfgCommParity | read-write | mandatory | Parity for the Communication port. |
| 1.3.6.1.4.1.466.6.1.12.1.7 | ColumndsucsuCfgCommDataBits | read-write | mandatory | Databits for the Communication port. |
| 1.3.6.1.4.1.466.6.1.12.1.8 | ColumndsucsuCfgCommBaud | read-write | mandatory | Baud rate for the Communication port. |
| 1.3.6.1.4.1.466.6.1.13 | TabledsucsuCfgBrdTable | not-accessible | mandatory | Network timing for 3000N board. |
| 1.3.6.1.4.1.466.6.1.13.1 | RowdsucsuCfgBrdEntry | not-accessible | mandatory | Board Timing Configuration Object. |
| 1.3.6.1.4.1.466.6.1.13.1.1 | ColumndsucsuCfgBrdSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.13.1.2 | ColumndsucsuCfgBrdNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.13.1.3 | ColumndsucsuCfgBrdTiming | read-write | mandatory | The Board Level Timing for a 3000N. |
| 1.3.6.1.4.1.466.6.1.14 | NodedsucsuCfgDacsTable | |||
| 1.3.6.1.4.1.466.6.1.14.1 | TabledsucsuCfgAutoAssignTable | not-accessible | mandatory | Automatically assign the proper amount of bandwidth. |
| 1.3.6.1.4.1.466.6.1.14.1.1 | RowdsucsuCfgAutoAssignEntry | not-accessible | mandatory | DACS auto assign Configuration Object. |
| 1.3.6.1.4.1.466.6.1.14.1.1.1 | ColumndsucsuConnAutoSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.14.1.1.2 | ColumndsucsuConnAutoNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.14.1.1.3 | ColumndsucsuConnAutoSrcPort | read-only | mandatory | Index to the 3000N source port of interest. 3000N supports two DTE-V35/RS-499 DATA ports (P3-P4). |
| 1.3.6.1.4.1.466.6.1.14.1.1.4 | ColumndsucsuConnAutoStartDS0 | read-write | mandatory | Port1/2 includes 24 DS0's. This value is the starting DS0 used by the node to allocate DS0s to meet port(3-4)-dte requirements. Sequential, contiguous DS0s are… |
| 1.3.6.1.4.1.466.6.1.14.1.1.5 | ColumndsucsuConnAutoDestPort | read-write | mandatory | Selects the port for which DS0s are automatically allocated to one of the T1 network ports. Node software may not allow connection of port1 to port1. |
| 1.3.6.1.4.1.466.6.1.14.1.1.6 | ColumndsucsuConnAutoType | read-write | mandatory | Defines the type of traffic being transported. The 3000N supports data (1) or voice (2). The selected type will be assigned to all DS0s. |
| 1.3.6.1.4.1.466.6.1.14.1.1.7 | ColumndsucsuConnDteRate | read-only | mandatory | Data rate of the DTE port. Can be chaged from the CfgDteTable. |
| 1.3.6.1.4.1.466.6.1.14.1.1.8 | ColumndsucsuConnDteDensity | read-only | mandatory | Channel/DS0 format for the DTE port. Can be changed from the CfgDteTable. |
| 1.3.6.1.4.1.466.6.1.14.1.1.9 | ColumndsucsuConnDs0Required | read-only | mandatory | The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections. |
| 1.3.6.1.4.1.466.6.1.14.1.1.10 | ColumndsucsuConnAutoStatus | read-only | mandatory | Queries the node's connection status. Code will be returned when a connection set or update is rejected or accepted. |
| 1.3.6.1.4.1.466.6.1.14.1.1.11 | ColumndsucsuConnAutoUpdateCmd | write-only | mandatory | Updates the connections with the edit buffer. The edit buffer is comprised of any changes sent (set) from the dsucsuCfgAutoAssignEntry. |
| 1.3.6.1.4.1.466.6.1.14.2 | TabledsucsuCfgCurrentConnTable | not-accessible | mandatory | Retrieves node's active connections assignments for display only. To edit connections, use CfgConnAutoAssign or CfgEditConnTable. |
| 1.3.6.1.4.1.466.6.1.14.2.1 | RowdsucsuCfgCurrentConnections | not-accessible | mandatory | An entry in the Current Connections Table. |
| 1.3.6.1.4.1.466.6.1.14.2.1.1 | ColumndsucsuSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.14.2.1.2 | ColumndsucsuNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.14.2.1.3 | ColumndsucsuT1Index | read-only | mandatory | Index to T1 network port of interest. The 3000N supports two NETWORK/DSX-1 ports. |
| 1.3.6.1.4.1.466.6.1.14.2.1.4 | ColumndsucsuDs0 | read-only | mandatory | DS0 number 1 through 24 corresponding to the T1 network port index. |
| 1.3.6.1.4.1.466.6.1.14.2.1.5 | ColumndsucsuDtePort | read-only | mandatory | DS0 assignment for indexed T1 network port. After making any adjustments to the connections, the dsucsuCfgConnUpdateCmd must be sent. Node software may not per… |
| 1.3.6.1.4.1.466.6.1.14.2.1.6 | ColumndsucsuType | read-only | mandatory | Defines the type of traffic being transported. The 3000N supports data (1) or voice (2). |
| 1.3.6.1.4.1.466.6.1.14.3 | TabledsucsuCfgEditConnTable | not-accessible | mandatory | Manually assign the proper amount of bandwidth. |
| 1.3.6.1.4.1.466.6.1.14.3.1 | RowdsucsuCfgEditConnEntry | not-accessible | mandatory | Edits current DS0 assignment. After making any adjustments to the connections, the dsucsuCfgConnUpdateCmd must be sent. |
| 1.3.6.1.4.1.466.6.1.14.3.1.1 | ColumndsucsuConnSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.14.3.1.2 | ColumndsucsuConnNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.14.3.1.3 | ColumndsucsuConnSrcPort | read-only | mandatory | Index to the source port of interest. The 3000N supports two NETWORK/DSX-1 and two DTE ports. |
| 1.3.6.1.4.1.466.6.1.14.3.1.4 | ColumndsucsuConnSrcDs0 | read-only | mandatory | The source DS0 number 1 through 24 corresponding to the T1 network port index |
| 1.3.6.1.4.1.466.6.1.14.3.1.5 | ColumndsucsuConnDestPort | read-write | mandatory | Index to the destination port of interest. The 3000N supports two NETWORK/DSX-1 and two DTE ports. |
| 1.3.6.1.4.1.466.6.1.14.3.1.6 | ColumndsucsuConnDestDs0 | read-write | mandatory | DS0 assignment for indexed T1 network port. After making any adjustments to the connections, the dsucsuConnUpdateCmd must be sent. Node software may not permit… |
| 1.3.6.1.4.1.466.6.1.14.3.1.7 | ColumndsucsuConnType | read-write | mandatory | Defines the type of traffic being transported. The 3000N supports data (1) or voice (2). |
| 1.3.6.1.4.1.466.6.1.14.3.1.8 | ColumndsucsuConnNumDs0s | read-write | mandatory | The total number of Ds0s to be connected. The number of Ds0s must be between 1 and 24. |
| 1.3.6.1.4.1.466.6.1.14.3.1.9 | ColumndsucsuConnSetStatus | read-only | mandatory | Displays node status from the last SNMP issed set command. |
| 1.3.6.1.4.1.466.6.1.14.3.1.10 | ColumndsucsuConnConnect | write-only | mandatory | Updates the connections with the edit buffer. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable. |
| 1.3.6.1.4.1.466.6.1.14.3.1.11 | ColumndsucsuConnUpdateRequired | read-only | mandatory | Displays node status from the last connection update. |
| 1.3.6.1.4.1.466.6.1.14.3.1.12 | ColumndsucsuConnUpdateCmd | write-only | mandatory | Sends the updated connections from the edit buffer to the node. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable. |
| 1.3.6.1.4.1.466.6.1.14.3.1.13 | ColumndsucsuConnClearEditBuff | write-only | mandatory | Removes all changes from edit buffer. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable. |
| 1.3.6.1.4.1.466.6.1.15 | TabledsucsuDiagNetTable | not-accessible | mandatory | A list of Network Diagnostic attributes. Loopbacks, tests and their respective results can be initiated, cancelled and examined. |
| 1.3.6.1.4.1.466.6.1.15.1 | RowdsucsuDiagNetEntry | not-accessible | mandatory | A Network Diagnostic entry |
| 1.3.6.1.4.1.466.6.1.15.1.1 | ColumndsucsuDiagNetSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.15.1.2 | ColumndsucsuDiagNetNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.15.1.3 | ColumndsucsuDiagNetIndex | read-only | mandatory | The network number to be examined for a particular node (3000N only). |
| 1.3.6.1.4.1.466.6.1.15.1.4 | ColumndsucsuDiagNetLclNetAggLpbk | read-write | mandatory | Enables the operator to control and examine the local aggregate loopback. This loopback occurs on the net side of the local transmit and receive logic. The uni… |
| 1.3.6.1.4.1.466.6.1.15.1.5 | ColumndsucsuDiagNetLclNetLpbk | read-write | mandatory | Enables the operator to control and examine the local network loopback. This loopback allows the operator to disconnect the side of the network by transmitting… |
| 1.3.6.1.4.1.466.6.1.15.1.6 | ColumndsucsuDiagNetLclNetPayload | read-write | mandatory | Enables the operator to control and examine the network payload loopback. This loopback occurs on the net side of the local transmit and receive logic. The uni… |
| 1.3.6.1.4.1.466.6.1.15.1.7 | ColumndsucsuDiagNetLclNetBiDir | read-write | mandatory | Enables the operator to control and examine the local network loopback. This loopback allows the operator to disconnect the side of the network by transmitting… |
| 1.3.6.1.4.1.466.6.1.15.1.8 | ColumndsucsuDiagNetRemCsuLpbk | read-write | mandatory | Enables the operator to control and examine the remote CSU loopback. This loopback allows the operator to test the operation of the local channel, the aggregat… |
| 1.3.6.1.4.1.466.6.1.15.1.9 | ColumndsucsuDiagNetRemDsuLpbk | read-write | mandatory | Enables the operator to control and examine the remote aggregate loopback. This loopback allows the operator to test the entire system from the local unit thro… |
| 1.3.6.1.4.1.466.6.1.15.1.10 | ColumndsucsuDiagNetEvElapTime | read-only | mandatory | The time elapsed since the Event Test started. The new Event Test commences as soon as the previous Event Test registers are cleared. |
| 1.3.6.1.4.1.466.6.1.15.1.11 | ColumndsucsuDiagNetEvCRC6Err | read-only | mandatory | The number of CRC6 errors encountered during the Event Test period. |
| 1.3.6.1.4.1.466.6.1.15.1.12 | ColumndsucsuDiagNetEvOofErr | read-only | mandatory | The number of Out-Of-Frame errors encountered during the Event Test period. |
| 1.3.6.1.4.1.466.6.1.15.1.13 | ColumndsucsuDiagNetErrEvents | read-only | mandatory | The number of Errored Events encountered during the Event Test period. |
| 1.3.6.1.4.1.466.6.1.15.1.14 | ColumndsucsuDiagNetClearEvReg | write-only | mandatory | Clear all the Event Test registers. Automatically initiates a new Event Test. |
| 1.3.6.1.4.1.466.6.1.16 | TabledsucsuDiagDteTable | not-accessible | mandatory | A list of DTE channel diagnostics. |
| 1.3.6.1.4.1.466.6.1.16.1 | RowdsucsuDiagDteEntry | not-accessible | mandatory | A DTE channel diagnostic entry |
| 1.3.6.1.4.1.466.6.1.16.1.1 | ColumndsucsuDiagDteSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.16.1.2 | ColumndsucsuDiagDteNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.16.1.3 | ColumndsucsuDiagDteIndex | read-only | mandatory | The channel number to be examined for a particular node. |
| 1.3.6.1.4.1.466.6.1.16.1.4 | ColumndsucsuDiagDteLocalBiDir | read-write | mandatory | This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional. |
| 1.3.6.1.4.1.466.6.1.16.1.5 | ColumndsucsuDiagDteLocalPayload | read-write | mandatory | This selection displays the status or controls the Local Payload Channel Loopback for the selected channel. |
| 1.3.6.1.4.1.466.6.1.16.1.6 | ColumndsucsuDiagDteRemLpbk | read-write | mandatory | This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which wi… |
| 1.3.6.1.4.1.466.6.1.16.1.7 | ColumndsucsuDiagDteBertTestAct | read-write | mandatory | BERT test related actions: a: Starts a BERT test on a channel, b: Stops a BERT test on a channel, c: Inject Errors while the BERT test is running, d: Clears BE… |
| 1.3.6.1.4.1.466.6.1.16.1.8 | ColumndsucsuDiagDteBertHourStrt | read-only | mandatory | Displays the hour that the BERT test started. |
| 1.3.6.1.4.1.466.6.1.16.1.9 | ColumndsucsuDiagDteBertMinStrt | read-only | mandatory | Displays th minute that BERT test started. |
| 1.3.6.1.4.1.466.6.1.16.1.10 | ColumndsucsuDiagDteBertTimeElaps | read-only | mandatory | Elapsed time since the BERT Test started |
| 1.3.6.1.4.1.466.6.1.16.1.11 | ColumndsucsuDiagDteBertErrors | read-only | mandatory | Number of BERT test errors encountered during the BERT Test. |
| 1.3.6.1.4.1.466.6.1.17 | TabledsucsuDiagFrmTable | not-accessible | mandatory | A list of framed channel diagnostics. |
| 1.3.6.1.4.1.466.6.1.17.1 | RowdsucsuDiagFrmEntry | not-accessible | mandatory | A framed channel diagnostic entry |
| 1.3.6.1.4.1.466.6.1.17.1.1 | ColumndsucsuDiagFrmSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.17.1.2 | ColumndsucsuDiagFrmNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.17.1.3 | ColumndsucsuDiagFrmIndex | read-only | mandatory | The channel number to be examined for a particular node. |
| 1.3.6.1.4.1.466.6.1.17.1.4 | ColumndsucsuDiagFrmLclLpbk | read-write | mandatory | This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional. |
| 1.3.6.1.4.1.466.6.1.17.1.5 | ColumndsucsuDiagFrmLclPayload | read-write | mandatory | This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which wi… |
| 1.3.6.1.4.1.466.6.1.17.1.6 | ColumndsucsuDiagFrmLclBiDir | read-write | mandatory | This selection displays the status or controls the DSX Loopback for the selected channel. This selection is applicable only for DSX channels. |
| 1.3.6.1.4.1.466.6.1.17.1.7 | ColumndsucsuDiagFrmRemLpbk | read-write | mandatory | This selection displays the status or controls the Local Channel Loopback for the selected channel. This loopback transmits a code to the remote node which wil… |
| 1.3.6.1.4.1.466.6.1.17.1.8 | ColumndsucsuDiagFrmLclDte | read-write | mandatory | This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional. This sele… |
| 1.3.6.1.4.1.466.6.1.17.1.9 | ColumndsucsuDiagFrmLclDte2 | read-write | mandatory | This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which wi… |
| 1.3.6.1.4.1.466.6.1.17.1.10 | ColumndsucsuDiagFrmBertTestAct | read-write | mandatory | BERT test related actions: a: Starts a BERT test on a channel, b: Stops a BERT test on a channel, c: Inject Errors while the BERT test is running, d: Clears BE… |
| 1.3.6.1.4.1.466.6.1.17.1.11 | ColumndsucsuDiagFrmEvElapTime | read-only | mandatory | The time elapsed since the PBX Event Test started. This selection is applicable only for PBX channels. |
| 1.3.6.1.4.1.466.6.1.17.1.12 | ColumndsucsuDiagFrmEvBpvErr | read-only | mandatory | The number of Bipolar Violations encountered during the Event Test. This selection is applicable only for PBX channels. |
| 1.3.6.1.4.1.466.6.1.17.1.13 | ColumndsucsuDiagFrmEvOofErr | read-only | mandatory | The number of Out-Of-Frame Errors encountered during the Event Test. This selection is applicable only for PBX channels. |
| 1.3.6.1.4.1.466.6.1.17.1.14 | ColumndsucsuDiagFrmFrameErr | read-only | mandatory | The number of Frame Errors encountered during the Event Test. This selection is applicable only for PBX channels. |
| 1.3.6.1.4.1.466.6.1.17.1.15 | ColumndsucsuDiagFrmClearEvReg | write-only | mandatory | Clears all the PBX Event Test registers. This selection is applicable only for PBX channels. |
| 1.3.6.1.4.1.466.6.1.18 | TabledsucsuDiagAuxTable | not-accessible | mandatory | Auxillary Channel Diagnostics |
| 1.3.6.1.4.1.466.6.1.18.1 | RowdsucsuDiagAuxEntry | not-accessible | mandatory | Auxilary diagnostic entry |
| 1.3.6.1.4.1.466.6.1.18.1.1 | ColumndsucsuDiagAuxSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.18.1.2 | ColumndsucsuDiagAuxNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.18.1.3 | ColumndsucsuDiagAuxChAStatus | read-only | mandatory | Status of Supervisory link channel A. |
| 1.3.6.1.4.1.466.6.1.18.1.4 | ColumndsucsuDiagAuxChBStatus | read-only | mandatory | Status of Supervisory Link Channel B. |
| 1.3.6.1.4.1.466.6.1.18.1.5 | ColumndsucsuDiagAuxFdlStatus | read-only | mandatory | Status of Facility Data Link (PORT1). |
| 1.3.6.1.4.1.466.6.1.18.1.6 | ColumndsucsuDiagAuxFdl2Status | read-only | mandatory | Status of Facility Data Link (PORT2). |
| 1.3.6.1.4.1.466.6.1.18.1.7 | ColumndsucsuDiagAuxMaintStatus | read-only | mandatory | The Maint. Port Supervisory link status. |
| 1.3.6.1.4.1.466.6.1.18.1.8 | ColumndsucsuDiagAuxCommStatus | read-only | mandatory | The Communications port Supervisory link status. |
| 1.3.6.1.4.1.466.6.1.19 | TabledsucsuDiagPortTable | not-accessible | mandatory | Port Specific Display only Diagnostics |
| 1.3.6.1.4.1.466.6.1.19.1 | RowdsucsuDiagPortEntry | not-accessible | mandatory | Port Specific Display only entry |
| 1.3.6.1.4.1.466.6.1.19.1.1 | ColumndsucsuDiagPortSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.19.1.2 | ColumndsucsuDiagPortNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.19.1.3 | ColumndsucsuDiagPortIndex | read-only | mandatory | The port index: unique per port. |
| 1.3.6.1.4.1.466.6.1.19.1.4 | ColumndsucsuDiagPortType | read-only | mandatory | The port type (NET/DSX/PBX/V.35/RS-449). |
| 1.3.6.1.4.1.466.6.1.19.1.5 | ColumndsucsuDiagPortStatus | read-only | mandatory | Current status condition of a particular port. |
| 1.3.6.1.4.1.466.6.1.20 | TabledsucsuIntervalTable | not-accessible | mandatory | The table contains various ESF stats collected over the last 96 15-minute intervals (24 hours total time). |
| 1.3.6.1.4.1.466.6.1.20.1 | RowdsucsuIntervalEntry | not-accessible | mandatory | Entry in the table of ESF interval stats. |
| 1.3.6.1.4.1.466.6.1.20.1.1 | ColumndsucsuIntervalSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.20.1.2 | ColumndsucsuIntervalNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.20.1.3 | ColumndsucsuIntervalPort | read-only | mandatory | The port index: unique per port. |
| 1.3.6.1.4.1.466.6.1.20.1.4 | ColumndsucsuIntervalNum | read-only | mandatory | The sequence number for the selected interval. |
| 1.3.6.1.4.1.466.6.1.20.1.5 | ColumndsucsuIntervalESs | read-only | mandatory | The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval. |
| 1.3.6.1.4.1.466.6.1.20.1.6 | ColumndsucsuIntervalSESs | read-only | mandatory | The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval. |
| 1.3.6.1.4.1.466.6.1.20.1.7 | ColumndsucsuIntervalBPVs | read-only | mandatory | The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers during the selected interval. |
| 1.3.6.1.4.1.466.6.1.20.1.8 | ColumndsucsuIntervalFSs | read-write | mandatory | The number of Failed Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval. |
| 1.3.6.1.4.1.466.6.1.22 | TabledsucsuCurrentTable | not-accessible | mandatory | The table contains various ESF stats collected over the current 15-minute interval. |
| 1.3.6.1.4.1.466.6.1.22.1 | RowdsucsuCurrentEntry | not-accessible | mandatory | Entry in the table of the current ESF stats. |
| 1.3.6.1.4.1.466.6.1.22.1.1 | ColumndsucsuCurrentSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.22.1.2 | ColumndsucsuCurrentNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.22.1.3 | ColumndsucsuCurrentPort | read-only | mandatory | The port index: unique per port. |
| 1.3.6.1.4.1.466.6.1.22.1.4 | ColumndsucsuCurrentESs | read-only | mandatory | The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval. |
| 1.3.6.1.4.1.466.6.1.22.1.5 | ColumndsucsuCurrentSESs | read-only | mandatory | The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval. |
| 1.3.6.1.4.1.466.6.1.22.1.6 | ColumndsucsuCurrentBPVs | read-only | mandatory | The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval. |
| 1.3.6.1.4.1.466.6.1.22.1.7 | ColumndsucsuCurrentSECs | read-only | mandatory | Number of seconds elapsed in the current 15 minute interval. |
| 1.3.6.1.4.1.466.6.1.22.1.8 | ColumndsucsuCurrentStatus | read-write | mandatory | Indication of whether statistics have been halted during current 15 minute interval. |
| 1.3.6.1.4.1.466.6.1.24 | TabledsucsuTotalTable | not-accessible | mandatory | The table contains the cummulative sum of various ESF stats collected over the last 24 hour period. |
| 1.3.6.1.4.1.466.6.1.24.1 | RowdsucsuTotalEntry | not-accessible | mandatory | Entry in the table of the total ESF stats. |
| 1.3.6.1.4.1.466.6.1.24.1.1 | ColumndsucsuTotalSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.24.1.2 | ColumndsucsuTotalNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.24.1.3 | ColumndsucsuTotalPort | read-only | mandatory | The port index: unique per port. |
| 1.3.6.1.4.1.466.6.1.24.1.4 | ColumndsucsuTotalESs | read-only | mandatory | The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals). |
| 1.3.6.1.4.1.466.6.1.24.1.5 | ColumndsucsuTotalSESs | read-only | mandatory | The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals). |
| 1.3.6.1.4.1.466.6.1.24.1.6 | ColumndsucsuTotalBPVs | read-only | mandatory | The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals). |
| 1.3.6.1.4.1.466.6.1.24.1.7 | ColumndsucsuTotalSECs | read-only | mandatory | Number of seconds elapsed in the last 24 hours. This will be the maximum value of 86400 unless the addressed node was brought on-line with the this period. |
| 1.3.6.1.4.1.466.6.1.24.1.8 | ColumndsucsuTotalStatus | read-write | mandatory | Indication of whether statistics have been halted in the last 24 hours. |
| 1.3.6.1.4.1.466.6.1.25 | ScalardsucsuAlarmType | read-only | mandatory | The type of alarms that are generated on the node |
| 1.3.6.1.4.1.466.6.1.26 | ScalardsucsuAlarmSlot | read-only | mandatory | The PC port to which the TyView node is attached. |
| 1.3.6.1.4.1.466.6.1.27 | ScalardsucsuAlarmNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.1.28 | ScalardsucsuAlarmName | read-only | mandatory | The name of the node which triggered the alarm. |
| 1.3.6.1.4.1.466.6.2 | Nodetyview | |||
| 1.3.6.1.4.1.466.6.2.1 | NodetyviewSysTable | |||
| 1.3.6.1.4.1.466.6.2.1.1 | ScalartyviewSysRevSw | read-only | mandatory | The TyView software revision. |
| 1.3.6.1.4.1.466.6.2.1.2 | ScalartyviewSysName | read-write | mandatory | The name given to TyView system. |
| 1.3.6.1.4.1.466.6.2.1.3 | ScalartyviewSysId | read-only | mandatory | The TyView system ID. |
| 1.3.6.1.4.1.466.6.2.1.4 | ScalartyviewSysTimeOutFactor | read-write | mandatory | The TyView timeout factor. |
| 1.3.6.1.4.1.466.6.2.1.5 | ScalartyviewSysObjectId | read-write | mandatory | The Tyview Domain Object Identifier. |
| 1.3.6.1.4.1.466.6.2.1.6 | ScalartyviewSysSlotNumber | read-only | mandatory | The Physical Slot Number the NETEXEC is installed in. |
| 1.3.6.1.4.1.466.6.2.1.7 | ScalartyviewSysClearDatabase | write-only | mandatory | Clear the node database. |
| 1.3.6.1.4.1.466.6.2.1.8 | ScalartyviewSysGetCommName | read-write | mandatory | The GET community name. |
| 1.3.6.1.4.1.466.6.2.1.9 | ScalartyviewSysSetCommName | read-write | mandatory | The SET community name. |
| 1.3.6.1.4.1.466.6.2.1.10 | ScalartyviewSysTrapCommName | read-write | mandatory | The TRAP community name. |
| 1.3.6.1.4.1.466.6.2.1.11 | ScalartyviewSysN1TrapDest | read-write | mandatory | The first Trap IP Destination. |
| 1.3.6.1.4.1.466.6.2.1.12 | ScalartyviewSysN2TrapDest | read-write | mandatory | The second Trap IP Destination. |
| 1.3.6.1.4.1.466.6.2.1.13 | ScalartyviewSysDate | read-write | mandatory | The NETEXEC date (mm/dd/yy). |
| 1.3.6.1.4.1.466.6.2.1.14 | ScalartyviewSysTime | read-write | mandatory | The NETEXEC time (hh:mm). |
| 1.3.6.1.4.1.466.6.2.1.15 | ScalartyviewSysMjrMnrLED | read-only | mandatory | The Major/Minor LED status. |
| 1.3.6.1.4.1.466.6.2.1.16 | ScalartyviewSysFanPSLED | read-only | mandatory | The Fan / Power Supply LED status. |
| 1.3.6.1.4.1.466.6.2.1.17 | ScalartyviewSysCtlrLED | read-only | mandatory | The Controller LED status. |
| 1.3.6.1.4.1.466.6.2.1.18 | ScalartyviewSysSlipLED | read-only | mandatory | The SLIP LED status. |
| 1.3.6.1.4.1.466.6.2.1.19 | ScalartyviewSysCtlChLED | read-only | mandatory | The Control Channel LED status. |
| 1.3.6.1.4.1.466.6.2.1.20 | ScalartyviewSysTDMLED | read-only | mandatory | The TDM LED status. |
| 1.3.6.1.4.1.466.6.2.1.21 | ScalartyviewSysMaintUseage | read-write | mandatory | The Maintenance Port useage specification. |
| 1.3.6.1.4.1.466.6.2.1.22 | ScalartyviewSysMaintDataBits | read-write | mandatory | The Maintenance Port databits specification. |
| 1.3.6.1.4.1.466.6.2.1.23 | ScalartyviewSysMaintRate | read-write | mandatory | The Maintenance Port rate specification. |
| 1.3.6.1.4.1.466.6.2.1.24 | ScalartyviewSysMaintStopBits | read-write | mandatory | The Maintenance Port stopbits specification. |
| 1.3.6.1.4.1.466.6.2.1.25 | ScalartyviewSysMaintParity | read-write | mandatory | The Maintenance Port parity specification. |
| 1.3.6.1.4.1.466.6.2.1.26 | ScalartyviewSysMaintMtu | read-write | mandatory | The Maintenance Port maximum trans unit size. |
| 1.3.6.1.4.1.466.6.2.1.27 | ScalartyviewSysMaintCompression | read-write | mandatory | The Maintenance Port compression specification. |
| 1.3.6.1.4.1.466.6.2.1.28 | ScalartyviewSysMaintSubnetMask | read-write | mandatory | The Maintenance Port subnet mask. |
| 1.3.6.1.4.1.466.6.2.1.29 | ScalartyviewSysMaintLocalIP | read-write | mandatory | The Maintenance Port local IP address. |
| 1.3.6.1.4.1.466.6.2.1.30 | ScalartyviewSysMaintPeerIP | read-write | mandatory | The Maintenance Port peer IP address. |
| 1.3.6.1.4.1.466.6.2.1.31 | ScalartyviewSysComUseage | read-write | mandatory | The Com Port useage specification. |
| 1.3.6.1.4.1.466.6.2.1.32 | ScalartyviewSysComDataBits | read-write | mandatory | The Com Port databits specification. |
| 1.3.6.1.4.1.466.6.2.1.33 | ScalartyviewSysComRate | read-write | mandatory | The Com Port rate specification. |
| 1.3.6.1.4.1.466.6.2.1.34 | ScalartyviewSysComStopBits | read-write | mandatory | The Com Port stopbits specification. |
| 1.3.6.1.4.1.466.6.2.1.35 | ScalartyviewSysComParity | read-write | mandatory | The Com Port parity specification. |
| 1.3.6.1.4.1.466.6.2.1.36 | ScalartyviewSysComMtu | read-write | mandatory | The Com Port maximum trans unit size. |
| 1.3.6.1.4.1.466.6.2.1.37 | ScalartyviewSysComCompression | read-write | mandatory | The Com Port compression specification. |
| 1.3.6.1.4.1.466.6.2.1.38 | ScalartyviewSysComSubnetMask | read-write | mandatory | The Com Port subnet mask. |
| 1.3.6.1.4.1.466.6.2.1.39 | ScalartyviewSysComLocalIP | read-write | mandatory | The Com Port local IP address. |
| 1.3.6.1.4.1.466.6.2.1.40 | ScalartyviewSysComPeerIP | read-write | mandatory | The Com Port peer IP address. |
| 1.3.6.1.4.1.466.6.2.1.41 | ScalartyviewSysTelnetEna | read-write | mandatory | The Telnet log-in enable. |
| 1.3.6.1.4.1.466.6.2.1.42 | ScalartyviewSysTelnetTO | read-write | mandatory | The Telnet auto-logout timeout (minutes). |
| 1.3.6.1.4.1.466.6.2.1.43 | ScalartyviewSysClrMjrMin | write-only | mandatory | Clear major/minor alarm window / LED. |
| 1.3.6.1.4.1.466.6.2.2 | TabletyviewDatabaseTable | not-accessible | mandatory | A list of tyview database entries. |
| 1.3.6.1.4.1.466.6.2.2.1 | RowtyviewDatabaseEntry | not-accessible | mandatory | System Object for TyView Database |
| 1.3.6.1.4.1.466.6.2.2.1.1 | ColumntyviewDatabaseSlot | read-only | mandatory | The PC port to which the node is attached. |
| 1.3.6.1.4.1.466.6.2.2.1.2 | ColumntyviewDatabaseNode | read-only | mandatory | The node ID: unique per port ID. |
| 1.3.6.1.4.1.466.6.2.2.1.3 | ColumntyviewDatabaseName | read-write | mandatory | The unique name of the node. |
| 1.3.6.1.4.1.466.6.2.2.1.4 | ColumntyviewDatabaseStatus | read-only | mandatory | The last comm status. |
| 1.3.6.1.4.1.466.6.2.3 | NodetyviewBroadcastTable | |||
| 1.3.6.1.4.1.466.6.2.3.1 | ScalartyviewBroadcastSetTime | write-only | mandatory | Broadcast the time to all nodes. |
| 1.3.6.1.4.1.466.6.2.3.2 | ScalartyviewBroadcastForwardAlarms | write-only | mandatory | Broadcast alarm forwarding. |
| 1.3.6.1.4.1.466.6.2.3.3 | ScalartyviewBroadcastClearLoopbacks | write-only | mandatory | Broadcast Clearing of loopbacks. |
| 1.3.6.1.4.1.466.6.2.4 | TabletyviewTPTable | not-accessible | mandatory | A list of Threshold Processing records. |
| 1.3.6.1.4.1.466.6.2.4.1 | RowtyviewTPEntry | not-accessible | mandatory | System Object for Threshold Processing |
| 1.3.6.1.4.1.466.6.2.4.1.1 | ColumntyviewTPRecord | read-only | mandatory | The Threshold Processing record referenced. |
| 1.3.6.1.4.1.466.6.2.4.1.2 | ColumntyviewTPMonNodeMode | read-write | mandatory | The mode used for monitoring nodes. |
| 1.3.6.1.4.1.466.6.2.4.1.3 | ColumntyviewTPNode | read-write | mandatory | The node name for node-specific monitoring. |
| 1.3.6.1.4.1.466.6.2.4.1.4 | ColumntyviewTPAlarmType | read-write | mandatory | The alarm type used to trigger. |
| 1.3.6.1.4.1.466.6.2.4.1.5 | ColumntyviewTPTriggerEvent | read-write | mandatory | The event type used to trigger. |
| 1.3.6.1.4.1.466.6.2.4.1.6 | ColumntyviewTPInstance | read-write | mandatory | The alarm instance used to trigger. |
| 1.3.6.1.4.1.466.6.2.4.1.7 | ColumntyviewTPInterval | read-write | mandatory | The alarm interval used to trigger. |
| 1.3.6.1.4.1.466.6.2.4.1.8 | ColumntyviewTPEventAction | read-write | mandatory | The phone number dialed when triggered. |
| 1.3.6.1.4.1.466.6.2.4.1.9 | ColumntyviewTPDryContact | read-write | mandatory | The type of Dry Contact when triggered. |
| 1.3.6.1.4.1.466.6.2.4.1.10 | ColumntyviewTPClearDryContact | write-only | mandatory | Clear major/minor Dry Contact. |