NETOPIA-MIB
377 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.304 | Nodefarallon | |||
| 1.3.6.1.4.1.304.1.3.1 | Nodenetopia | |||
| 1.3.6.1.4.1.304.1.3.1.1 | NodesysParams | |||
| 1.3.6.1.4.1.304.1.3.1.1.1 | ScalarhwVersion | read-only | mandatory | The device's hardware version, consisting of a major version, minor version, release stage, and revision number, packed into 4 octets. The first octet contains… |
| 1.3.6.1.4.1.304.1.3.1.1.2 | ScalarfwVersion | read-only | mandatory | The device's firmware version, consisting of a major version, minor version, release stage, and revision number, packed into 4 octets. The first octet contains… |
| 1.3.6.1.4.1.304.1.3.1.1.3 | ScalarproductMIBVersion | read-only | mandatory | The version of the product specific MIB implemented by the device's SNMP agent, consisting of a major version, minor version, release stage, and revision numbe… |
| 1.3.6.1.4.1.304.1.3.1.1.4 | ScalarserialNumber | read-only | mandatory | The device's 24-bit serial number. The value of this object is the same as the least significant three bytes of the physical address of the device's Ethernet i… |
| 1.3.6.1.4.1.304.1.3.1.1.5 | ScalarmodelNumber | read-only | mandatory | The device's model number. |
| 1.3.6.1.4.1.304.1.3.1.2 | NodeclockParams | |||
| 1.3.6.1.4.1.304.1.3.1.2.1 | ScalarbootTime | read-only | mandatory | The time and date (in human-readable form) when the device was last restarted. |
| 1.3.6.1.4.1.304.1.3.1.2.2 | ScalarsystemClock | read-write | mandatory | The current setting of the system clock encoded as fourteen decimal-ASCII digits in the form 'YYYYMMDDHHMMSS'. Thus, 10:35:00 p.m. on August 6, 1959 would be r… |
| 1.3.6.1.4.1.304.1.3.1.3 | NodesysStats | |||
| 1.3.6.1.4.1.304.1.3.1.3.1 | ScalarcurrentCpuUtil | read-only | mandatory | The device's current CPU utilization, measured as the percentage of time the device has been non-idle during the most recent one-second interval. |
| 1.3.6.1.4.1.304.1.3.1.3.2 | ScalaraverageCpuUtil | read-only | mandatory | The device's average CPU utilization, measured as the percentage of time the device has been non-idle during the most recent one-minute interval. |
| 1.3.6.1.4.1.304.1.3.1.3.3 | ScalarcurrentBufs | read-only | mandatory | The device's current 1-second buffer utilization, measured as a percentage of all available buffers. |
| 1.3.6.1.4.1.304.1.3.1.3.4 | ScalaraverageBufs | read-only | mandatory | The device's current 1-minute buffer utilization, measured as a percentage of all available buffers. |
| 1.3.6.1.4.1.304.1.3.1.3.5 | ScalartotalRAM | read-only | mandatory | The number of bytes of Random-Access Memory (RAM) available on the device. |
| 1.3.6.1.4.1.304.1.3.1.3.6 | ScalarusedRAM | read-only | mandatory | The number of bytes of RAM in use at the current time. |
| 1.3.6.1.4.1.304.1.3.1.3.7 | ScalartotalFEPROM | read-only | mandatory | The number of bytes of Flash-Erasable Programmable Read-Only Memory (Flash-EPROM) available on the device. |
| 1.3.6.1.4.1.304.1.3.1.3.8 | ScalarusedFEPROM | read-only | mandatory | The number of bytes of Flash-Erasable Programmable Read-Only Memory (Flash-EPROM) in use at the current time. |
| 1.3.6.1.4.1.304.1.3.1.4 | NodeipParams | |||
| 1.3.6.1.4.1.304.1.3.1.4.1 | ScalaripAddr | read-write | mandatory | The IP address that the device will use after a restart. The device's active IP address can be determined by examining the appropriate instance of the ipAdEntA… |
| 1.3.6.1.4.1.304.1.3.1.4.2 | ScalaripNetMask | read-write | mandatory | The subnet mask that the device will use after a restart. The device's active subnet mask can be determined by examining the appropriate instance of the ipAdEn… |
| 1.3.6.1.4.1.304.1.3.1.4.3 | ScalaripBcastForm | read-write | mandatory | The type of IP broadcast address that the device will use after a restart: the Internet standard all-ones broadcast address or the non- standard all zeros broa… |
| 1.3.6.1.4.1.304.1.3.1.4.4 | ScalaripEncap | read-write | mandatory | The type of IP datagram encapsulation that the device will use after a restart: Ethernet or IEEE802.2. The active type of IP datagram encapsulation can be dete… |
| 1.3.6.1.4.1.304.1.3.1.4.5 | ScalaripDefaultGateway | read-write | mandatory | The default gateway IP address that the device will use after a restart. The device's operational default gateway IP address can be determined by examining the… |
| 1.3.6.1.4.1.304.1.3.1.4.6 | ScalaripDomainName | read-write | mandatory | The device's domain name. |
| 1.3.6.1.4.1.304.1.3.1.4.7 | TableipDNSServerTable | not-accessible | mandatory | A list of entries describing the device's Domain Name System name servers. This table supports 'conceptual row creation' according to section 3.2(3) of RFC 121… |
| 1.3.6.1.4.1.304.1.3.1.4.7.1 | RowipDNSServerEntry | not-accessible | mandatory | An entry describing one of the device's Domain Name System name servers. |
| 1.3.6.1.4.1.304.1.3.1.4.7.1.1 | ColumnipDNSServerIndex | read-only | mandatory | A unique value for each of the device's Domain Name System name servers. The value of this object ranges between one and the number of such servers. Servers ar… |
| 1.3.6.1.4.1.304.1.3.1.4.7.1.2 | ColumnipDNSServerAddress | read-write | mandatory | The IP address of the Domain Name System name server described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.4.7.1.3 | ColumnipDNSServerStatus | read-write | mandatory | The status of this entry. Setting this object to the value 'invalid(2)' has the effect of invalidating the corresponding entry in the ipDNSServerTable. That is… |
| 1.3.6.1.4.1.304.1.3.1.5 | NoderipParams | |||
| 1.3.6.1.4.1.304.1.3.1.5.1 | ScalarripEnTxEnable | read-write | mandatory | Indicates whether or not transmission of RIP packets on the device's Ethernet interface will be enabled when the device is next restarted. Transmission of RIP … |
| 1.3.6.1.4.1.304.1.3.1.5.2 | ScalarripEnRxEnable | read-write | mandatory | Indicates whether or not reception of RIP packets will be enabled on the Ethernet interface when the device is next restarted. Reception of RIP packets should … |
| 1.3.6.1.4.1.304.1.3.1.6 | NodeatParams | |||
| 1.3.6.1.4.1.304.1.3.1.6.1 | TableatportXTable | not-accessible | mandatory | A list of entries providing additional information for the device's AppleTalk ports. |
| 1.3.6.1.4.1.304.1.3.1.6.1.1 | RowatportXEntry | not-accessible | mandatory | An entry containing additional information one of the device's AppleTalk ports. |
| 1.3.6.1.4.1.304.1.3.1.6.1.1.1 | ColumnatportXIndex | read-only | mandatory | The AppleTalk router port to which this entry applies. The port identified by a particular value of this index is the same port as is identified by the same va… |
| 1.3.6.1.4.1.304.1.3.1.6.1.1.2 | ColumnatportXHide | read-write | mandatory | Indicates whether or not this AppleTalk port will be hidden by the router. Hiding an AppleTalk port prevents the router from forwarding AppleTalk Name Binding … |
| 1.3.6.1.4.1.304.1.3.1.6.1.1.3 | ColumnatportXSeed | read-write | mandatory | Indicates how this AppleTalk port will seed itself at startup. If the port is set to softseed, the router will get the port's network seed configuration from a… |
| 1.3.6.1.4.1.304.1.3.1.6.2 | TableatportZoneTable | not-accessible | mandatory | The table of zone information for ports. The atportZoneTable object supports 'conceptual row creation' according to section 3.2(3) of RFC 1212: To add a new ro… |
| 1.3.6.1.4.1.304.1.3.1.6.2.1 | RowatportZoneEntry | not-accessible | mandatory | An entry of zone information for a port. |
| 1.3.6.1.4.1.304.1.3.1.6.2.1.1 | ColumnatportZonePort | read-write | mandatory | An integer representing the port to which this zone belongs. The port identified by a particular value of this object is the same port as is identified by the … |
| 1.3.6.1.4.1.304.1.3.1.6.2.1.2 | ColumnatportZoneName | read-write | mandatory | A zone name configured for the AppleTalk port identified by the corresponding instance of atportZonePort. |
| 1.3.6.1.4.1.304.1.3.1.6.2.1.3 | ColumnatportZoneDefault | read-write | mandatory | The zone is marked as 'default(1)' if it is the default zone for the network attached to this port, and 'notDefault(2)' if it is not. Exactly one zone must be … |
| 1.3.6.1.4.1.304.1.3.1.6.2.1.4 | ColumnatportZoneStatus | read-write | mandatory | The status of this zone entry. Setting this object to the value 'invalid(2)' has the effect of invalidating the corresponding entry in the atportZoneTable. Tha… |
| 1.3.6.1.4.1.304.1.3.1.6.3 | TableatportTrafficTable | not-accessible | mandatory | A list of traffic statistics for the router ports. |
| 1.3.6.1.4.1.304.1.3.1.6.3.1 | RowatportTrafficEntry | not-accessible | mandatory | The traffic statistics for a single router port. |
| 1.3.6.1.4.1.304.1.3.1.6.3.1.1 | ColumnatportTrafficIndex | read-only | mandatory | The AppleTalk router port to which this entry applies. The AppleTalk router port identified by a particular value of this index is the same AppleTalk router po… |
| 1.3.6.1.4.1.304.1.3.1.6.3.1.2 | ColumnatportTrafficRxBytes | read-only | mandatory | The number of bytes the AppleTalk router has received from this port. |
| 1.3.6.1.4.1.304.1.3.1.6.3.1.3 | ColumnatportTrafficRxPackets | read-only | mandatory | The number of packets the AppleTalk router has received from this port. |
| 1.3.6.1.4.1.304.1.3.1.6.3.1.4 | ColumnatportTrafficTxBytes | read-only | mandatory | The number of bytes the AppleTalk router has transmitted to this port. |
| 1.3.6.1.4.1.304.1.3.1.6.3.1.5 | ColumnatportTrafficTxPackets | read-only | mandatory | The number of packets the AppleTalk router has transmitted to this port. |
| 1.3.6.1.4.1.304.1.3.1.6.4 | ScalardeviceNBPObject | read-write | mandatory | The object portion of the AppleTalk Name Binding Protocol (NBP) name used by device- resident service providers to advertise their services using NBP. Setting … |
| 1.3.6.1.4.1.304.1.3.1.7 | NodemacipParams | |||
| 1.3.6.1.4.1.304.1.3.1.7.1 | ScalarmacipSupport | read-write | mandatory | Indicates whether or not MacIP support will be enabled when the device is restarted, and, if enabled, specifies the type of MacIP support to be used: IP subnet… |
| 1.3.6.1.4.1.304.1.3.1.7.2 | ScalarmacipIpSubIpAddr | read-write | mandatory | Indicates the MacIP gateway's IP address on the MacIP subnet in IP Subnetting mode. The value of this object is meaningful only if the value of macipSupport is… |
| 1.3.6.1.4.1.304.1.3.1.7.3 | ScalarmacipIpSubNetMask | read-write | mandatory | The subnet mask associated with macipIpSubIpAddr. This is also the subnet mask sent to clients in response to a SERVER request. The value of this object is mea… |
| 1.3.6.1.4.1.304.1.3.1.7.4 | ScalarmacipFirstClientIpAddr | read-write | mandatory | Indicates the first static MacIP client address, or, if the value of macipNumStaticAddrs is zero, the first dynamic MacIP client address. (If the value of maci… |
| 1.3.6.1.4.1.304.1.3.1.7.5 | ScalarmacipNumStaticAddrs | read-write | mandatory | Indicates the maximum number of static IP addresses available to clients of the MacIP gateway. The sum of the maximum number of static and dynamic IP addresses… |
| 1.3.6.1.4.1.304.1.3.1.7.6 | ScalarmacipNumDynamicAddrs | read-write | mandatory | Indicates the maximum number of dynamic IP addresses available to clients requesting an IP address from the MacIP gateway. The sum of the maximum number of sta… |
| 1.3.6.1.4.1.304.1.3.1.7.7 | ScalarmacipMaxAddrs | read-only | mandatory | Indicates the pre-configured limit on the sum of the maximum number of static and dynamic addresses available to MacIP gateway clients. The sum of the values o… |
| 1.3.6.1.4.1.304.1.3.1.7.8 | ScalarmacipUnusedDynamicAddrs | read-only | mandatory | Indicates the current number of unused dynamic addresses available to MacIP gateway clients. |
| 1.3.6.1.4.1.304.1.3.1.7.9 | ScalarmacipAssignRequests | read-only | mandatory | Indicates the number of ASSIGN requests received by the MacIP gateway. |
| 1.3.6.1.4.1.304.1.3.1.7.10 | ScalarmacipServerRequests | read-only | mandatory | Indicates the number of SERVER requests received by the MacIP gateway. |
| 1.3.6.1.4.1.304.1.3.1.7.11 | ScalarmacipRefusedAssignRequests | read-only | mandatory | Indicates the number of times that the gateway was unable to assign a dynamic IP address to a client because all available dynamic addresses were in use. |
| 1.3.6.1.4.1.304.1.3.1.7.12 | ScalarmacipBadRequests | read-only | mandatory | Indicates the number of unsupported and/or unknown requests received by the MacIP gateway. These include NAME, RELEASE, and STATIC requests as well as requests… |
| 1.3.6.1.4.1.304.1.3.1.7.13 | ScalarmacipForwardedAtFrames | read-only | mandatory | The total number of frames that the MacIP gateway received from the AppleTalk network and forwarded to the IP network. |
| 1.3.6.1.4.1.304.1.3.1.7.14 | ScalarmacipForwardedAtOctets | read-only | mandatory | The total number of octets contained in the frames counted by the macipForwardedAtFrames object. |
| 1.3.6.1.4.1.304.1.3.1.7.15 | ScalarmacipDroppedAtFrames | read-only | mandatory | The number of frames that the MacIP gateway received from the AppleTalk network that the gateway was unable to forward to the IP network. |
| 1.3.6.1.4.1.304.1.3.1.7.16 | ScalarmacipForwardedIpFrames | read-only | mandatory | The total number of frames that the MacIP gateway received from the IP network and forwarded to the AppleTalk network. |
| 1.3.6.1.4.1.304.1.3.1.7.17 | ScalarmacipForwardedIpOctets | read-only | mandatory | The total number of octets contained in the frames counted by the macipForwardedIpFrames object. |
| 1.3.6.1.4.1.304.1.3.1.7.18 | ScalarmacipDroppedIpFrames | read-only | mandatory | The number of frames that the MacIP gateway received from the IP network that the gateway was unable to forward to the AppleTalk network. |
| 1.3.6.1.4.1.304.1.3.1.7.19 | TablemacipClientTable | not-accessible | mandatory | A list of entries containing information about the device's MacIP clients. |
| 1.3.6.1.4.1.304.1.3.1.7.19.1 | RowmacipClientEntry | not-accessible | mandatory | An entry containing information about one of the device's MacIP clients. |
| 1.3.6.1.4.1.304.1.3.1.7.19.1.1 | ColumnmacipClientIpAddr | read-only | mandatory | The IP address assigned to this MacIP client. |
| 1.3.6.1.4.1.304.1.3.1.7.19.1.2 | ColumnmacipClientIpAddrType | read-only | mandatory | Indicates whether the IP address assigned to this MacIP client is a static or dynamic IP address. |
| 1.3.6.1.4.1.304.1.3.1.7.19.1.3 | ColumnmacipClientAtAddr | read-only | mandatory | The AppleTalk address of this MacIP client. |
| 1.3.6.1.4.1.304.1.3.1.7.19.1.4 | ColumnmacipClientIdleTime | read-only | mandatory | The length of time in seconds that this MacIP client has been idle. |
| 1.3.6.1.4.1.304.1.3.1.8 | NodedhcpParams | |||
| 1.3.6.1.4.1.304.1.3.1.8.1 | NodedhcpConfig | |||
| 1.3.6.1.4.1.304.1.3.1.8.1.1 | ScalardhcpSupport | read-write | mandatory | Indicates whether or not DHCP support will be enabled when the device is next restarted. |
| 1.3.6.1.4.1.304.1.3.1.8.1.2 | ScalardhcpFirstClientAddr | read-write | mandatory | Indicates the first IP address available for assignment to DHCP clients. The network portion of this IP address must match the network portion of the device's … |
| 1.3.6.1.4.1.304.1.3.1.8.1.3 | ScalardhcpNumClientAddrs | read-write | mandatory | Indicates the initial size, when the device is next restarted, of the pool of IP addresses available for assignment to clients requesting IP addresses via DHCP… |
| 1.3.6.1.4.1.304.1.3.1.8.1.4 | ScalardhcpMaxClientAddrs | read-only | mandatory | Indicates the maximum value of the dhcpNumClientAddrs object. |
| 1.3.6.1.4.1.304.1.3.1.8.1.5 | ScalardhcpServerName | read-write | mandatory | The name the DHCP server uses to identify itself to DHCP clients. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6 | NodedhcpOptions | |||
| 1.3.6.1.4.1.304.1.3.1.8.1.6.1 | TabledhcpOptionTable | not-accessible | mandatory | A list of entries containing information about the DHCP options served to DHCP clients. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.1.1 | RowdhcpOptionEntry | not-accessible | mandatory | An entry containing information about one of the DHCP options served to DHCP clients. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.1.1.1 | ColumndhcpOptionCode | read-only | mandatory | The option code for the DHCP option described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.1.1.2 | ColumndhcpOptionName | read-only | mandatory | The name of the DHCP option described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.1.1.3 | ColumndhcpOptionValueObject | read-only | mandatory | The authoritatively-assigned name of the MIB object that is used to configure the value served to clients requesting the DHCP option described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.1.1.4 | ColumndhcpOptionStatus | read-write | mandatory | Indicates whether or not the DHCP option described by this entry is currently being served to DHCP clients. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.2 | ScalardhcpDefaultGateway | read-write | mandatory | The router IP address sent to clients requesting the Router Option (DHCP option code 3). The default value for this object will be the IP address of the device… |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.3 | TabledhcpDNSServerTable | not-accessible | mandatory | A list of entries corresponding to the Domain Name System name servers in the list of such servers sent to DHCP clients requesting the Domain Name Server Optio… |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.3.1 | RowdhcpDNSServerEntry | not-accessible | mandatory | An entry corresponding to a Domain Name System name server in the list of such servers sent to DHCP clients requesting the Domain Name Server Option (DHCP opti… |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.3.1.1 | ColumndhcpDNSServerIndex | read-only | mandatory | A unique value for each Domain Name System name server in the list of such servers to be sent to DHCP clients requesting the Domain Name Server Option (DHCP op… |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.3.1.2 | ColumndhcpDNSServerAddress | read-write | mandatory | The IP address of the Domain Name System name server described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.3.1.3 | ColumndhcpDNSServerStatus | read-write | mandatory | The status of this entry. Setting this object to the value 'invalid(2)' has the effect of invalidating the corresponding entry in the dhcpDNSServerTable. That … |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.4 | ScalardhcpDomainName | read-write | mandatory | The domain name sent to DHCP clients requesting the Domain Name Option (DHCP option code 15). The default value for this object is the value of the ipDomainNam… |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.5 | ScalardhcpNetBiosNameServer | read-write | mandatory | Indicates the value of the NetBIOS over TCP/IP Name Server Option (DHCP option code 44) to be sent to DHCP clients. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.6 | ScalardhcpNetBiosTcpNodeType | read-write | mandatory | Indicates the value of the NetBIOS over TCP/IP Node Type Option (DHCP option code 46) to be sent to DHCP clients. |
| 1.3.6.1.4.1.304.1.3.1.8.1.6.7 | ScalardhcpNetBiosTcpScope | read-write | mandatory | Indicates the value of the NetBIOS over TCP/IP Scope Option (DHCP option code 47) to be sent to DHCP clients. |
| 1.3.6.1.4.1.304.1.3.1.8.2 | NodedhcpInfo | |||
| 1.3.6.1.4.1.304.1.3.1.8.2.1 | ScalardhcpUnassignedClientAddrs | read-only | mandatory | Indicates the number of unassigned IP addresses available for assignment to clients requesting an IP address via DHCP. |
| 1.3.6.1.4.1.304.1.3.1.8.2.2 | TabledhcpClientTable | not-accessible | mandatory | A list of entries containing information about the device's dhcp clients. |
| 1.3.6.1.4.1.304.1.3.1.8.2.2.1 | RowdhcpClientEntry | not-accessible | mandatory | An entry containing information about one of the device's dhcp clients. |
| 1.3.6.1.4.1.304.1.3.1.8.2.2.1.1 | ColumndhcpClientIpAddr | read-only | mandatory | The IP address assigned to this DHCP client. |
| 1.3.6.1.4.1.304.1.3.1.8.2.2.1.2 | ColumndhcpClientIdentifier | read-only | mandatory | The value of the Client Identifier Option (DHCP option code 61) supplied by this DHCP client. |
| 1.3.6.1.4.1.304.1.3.1.8.2.2.1.3 | ColumndhcpClientState | read-only | mandatory | The status of the IP address assignment to this DHCP client. The value 'offered(1)' indicates that the IP address has been offered to, but not accepted by, thi… |
| 1.3.6.1.4.1.304.1.3.1.8.2.2.1.4 | ColumndhcpClientTimeLeft | read-only | mandatory | The length of time in seconds remaining on the IP address lease to this DHCP client. |
| 1.3.6.1.4.1.304.1.3.1.8.2.3 | TabledhcpMRBindingTable | not-accessible | mandatory | A list of entries containing information about the most recent binding of each of the IP addresses in the device's DHCP address pool to a DHCP client. |
| 1.3.6.1.4.1.304.1.3.1.8.2.3.1 | RowdhcpMRBindingEntry | not-accessible | mandatory | An entry containing information about the most recent binding of one of the IP addresses in the device's DHCP address pool to a DHCP client. |
| 1.3.6.1.4.1.304.1.3.1.8.2.3.1.1 | ColumndhcpMRBindingIpAddr | read-only | mandatory | The IP address for which this entry describes the most recent binding to a DHCP client. |
| 1.3.6.1.4.1.304.1.3.1.8.2.3.1.2 | ColumndhcpMRBindingClientIdentifier | read-only | mandatory | The value of the Client Identifier Option (DHCP option 61) specified by the client to which the IP address identified by this entry was most recently bound via… |
| 1.3.6.1.4.1.304.1.3.1.9 | NodeaurpParams | |||
| 1.3.6.1.4.1.304.1.3.1.9.1 | NodeaurpConfig | |||
| 1.3.6.1.4.1.304.1.3.1.9.1.1 | TableaurpTunCfgTable | not-accessible | mandatory | A list of entries providing information for configuring the device's AURP tunnels when the device is next restarted. |
| 1.3.6.1.4.1.304.1.3.1.9.1.1.1 | RowaurpTunCfgEntry | not-accessible | mandatory | An entry providing information for configuring one of the device's AURP tunnels when the device is next restarted. |
| 1.3.6.1.4.1.304.1.3.1.9.1.1.1.1 | ColumnaurpTunCfgPortIndex | read-only | mandatory | The AppleTalk port associated with the AURP tunnel. The AppleTalk port identified by a particular value of this object is the same port as is identified by the… |
| 1.3.6.1.4.1.304.1.3.1.9.1.1.1.2 | ColumnaurpTunCfgSupport | read-write | mandatory | Indicates whether or not AURP support will be enabled when the device is next restarted. |
| 1.3.6.1.4.1.304.1.3.1.9.1.1.1.3 | ColumnaurpTunCfgAcceptAnyPartner | read-write | mandatory | Indicates whether or not the device will accept a connection from an AURP partner for which there is no entry in the aurpCfgPartnerTable. |
| 1.3.6.1.4.1.304.1.3.1.9.1.1.1.4 | ColumnaurpTunCfgNetworkRemapping | read-write | mandatory | Indicates whether or not network number remapping will be enabled when the device is next restarted. |
| 1.3.6.1.4.1.304.1.3.1.9.1.1.1.5 | ColumnaurpTunCfgClustering | read-write | mandatory | Indicates whether or not clustering will be enabled when the device is next restarted. Because clustering assumes network number remapping, the value of this o… |
| 1.3.6.1.4.1.304.1.3.1.9.1.1.1.6 | ColumnaurpTunCfgHopCountReduction | read-write | mandatory | Indicates whether or not hop count reduction will be enabled when the device is next restarted. Because hop count reduction assumes network number remapping, t… |
| 1.3.6.1.4.1.304.1.3.1.9.1.2 | TableaurpRemapRangeCfgTable | not-accessible | mandatory | A list of entries providing the AppleTalk network address ranges reserved for use in remapping imported networks on the device's AURP tunnels when the device i… |
| 1.3.6.1.4.1.304.1.3.1.9.1.2.1 | RowaurpRemapRangeCfgEntry | not-accessible | mandatory | An entry providing an AppleTalk network address range reserved for use in remapping imported networks on one of the device's AURP tunnels when the device is ne… |
| 1.3.6.1.4.1.304.1.3.1.9.1.2.1.1 | ColumnaurpRemapRangeCfgPortIndex | read-only | mandatory | The AppleTalk port associated with the AURP tunnel for which this entry describes an AppleTalk network number range that will be reserved for use in remapping … |
| 1.3.6.1.4.1.304.1.3.1.9.1.2.1.2 | ColumnaurpRemapRangeCfgIndex | read-only | mandatory | A unique value for each of the AppleTalk network number ranges reserved for use in remapping imported networks on this tunnel when the device is next restarted. |
| 1.3.6.1.4.1.304.1.3.1.9.1.2.1.3 | ColumnaurpRemapRangeCfgNetStart | read-only | mandatory | The first AppleTalk network number of the range of network numbers reserved for remapping imported networks. |
| 1.3.6.1.4.1.304.1.3.1.9.1.2.1.4 | ColumnaurpRemapRangeCfgNetEnd | read-write | mandatory | The last AppleTalk network number of the range of network numbers reserved for remapping imported networks. |
| 1.3.6.1.4.1.304.1.3.1.9.1.3 | TableaurpCfgPartnerTable | not-accessible | mandatory | A list of entries containing information about the AURP partners to which the device can place connections and/or from which the device will accept connections… |
| 1.3.6.1.4.1.304.1.3.1.9.1.3.1 | RowaurpCfgPartnerEntry | not-accessible | mandatory | An entry containing information about one of the AURP partners to which the device can initiate a connection and/or from which the device will accept a connect… |
| 1.3.6.1.4.1.304.1.3.1.9.1.3.1.1 | ColumnaurpCfgPartnerPortIndex | read-only | mandatory | The AppleTalk port associated with the AURP tunnel for which this entry describes a respected AURP partner. The AppleTalk port identified by a particular value… |
| 1.3.6.1.4.1.304.1.3.1.9.1.3.1.2 | ColumnaurpCfgPartnerName | read-only | mandatory | The name of this AURP partner. The value of this object can be a fully- or partially-qualified domain name system (dns) name, or it can be an IP address in the… |
| 1.3.6.1.4.1.304.1.3.1.9.1.3.1.3 | ColumnaurpCfgPartnerIpAddr | read-only | mandatory | The IP address of this AURP partner. |
| 1.3.6.1.4.1.304.1.3.1.9.1.3.1.4 | ColumnaurpCfgPartnerInitiateConnection | read-write | mandatory | Indicates whether or not the device will attempt to initiate a connection to this AURP partner when the device is next restarted. |
| 1.3.6.1.4.1.304.1.3.1.9.1.3.1.5 | ColumnaurpCfgPartnerStatus | read-write | mandatory | Indicates the status of this entry. Setting the value of this object to 'invalid(2)' has the effect of invalidating the corresponding entry in the aurpCfgPartn… |
| 1.3.6.1.4.1.304.1.3.1.9.2 | NodeaurpInfo | |||
| 1.3.6.1.4.1.304.1.3.1.9.2.1 | TableaurpTunnelTable | not-accessible | mandatory | A list of entries containing information about the device's AURP tunnels. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1 | RowaurpTunnelEntry | not-accessible | mandatory | An entry containing information about one of the device's AURP tunnels. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.1 | ColumnaurpTunnelPortIndex | read-only | mandatory | The AppleTalk port associated with this tunnel. The AppleTalk port identified by a particular value of this object is the same port as is identified by the sam… |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.2 | ColumnaurpTunnelPortType | read-only | mandatory | The type of the foreign network underlying the AURP tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.3 | ColumnaurpTunnelStatus | read-only | mandatory | The operational status of this AURP tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.4 | ColumnaurpTunnelAcceptAnyPartner | read-only | mandatory | Indicates whether or not the device will accept connections on this tunnel from AURP partners for which there was no entry in the aurpCfgPartnerTable when the … |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.5 | ColumnaurpTunnelNetworkRemapping | read-only | mandatory | Indicates whether or not network number remapping is enabled on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.6 | ColumnaurpTunnelClustering | read-only | mandatory | Indicates whether or not clustering of remapped networks is enabled on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.7 | ColumnaurpTunnelHopCountReduction | read-only | mandatory | Indicates whether or not hop count reduction is enabled on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.8 | ColumnaurpTunnelDomainIdentifier | read-only | mandatory | The domain identifier associated with this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.9 | ColumnaurpTunnelOpenRequests | read-only | mandatory | The number of Open Request packets that have been received on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.10 | ColumnaurpTunnelRouterDowns | read-only | mandatory | The number of Router Down packets that have been received on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.11 | ColumnaurpTunnelRemapErrors | read-only | mandatory | The number of remapping-specific errors that have occurred on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.12 | ColumnaurpTunnelClusterErrors | read-only | mandatory | The number of clustering-specific errors that have occurred on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.13 | ColumnaurpTunnelBrokenConnections | read-only | mandatory | The number of times a point-to-point connection on this tunnel has been broken or dropped. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.14 | ColumnaurpTunnelInvalidVersionErrors | read-only | mandatory | The number of packets with invalid version errors received on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.1.1.15 | ColumnaurpTunnelAuthenticationErrors | read-only | mandatory | The number of authentication errors received on this tunnel. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2 | TableaurpConnectionTable | not-accessible | mandatory | A list of entries containing information about the device's AURP connections. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1 | RowaurpConnectionEntry | not-accessible | mandatory | An entry describing one of the device's AURP connections. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.1 | ColumnaurpConnectionPortIndex | read-only | mandatory | The AppleTalk port associated with this connection. The AppleTalk port identified by a particular value of this object is the same port as is identified by the… |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.2 | ColumnaurpConnectionIndex | read-only | mandatory | A unique value for each connection on this port. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.3 | ColumnaurpConnectionAddress | read-only | mandatory | The address of the remote router for this connection. This address is dependent on the underlying network system as indicated by the corresponding instance of … |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.4 | ColumnaurpConnectionSentRIs | read-only | mandatory | The number of Routing Information packets that have been sent on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.5 | ColumnaurpConnectionRecvRIs | read-only | mandatory | The number of Routing Information packets that have been received on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.6 | ColumnaurpConnectionSentZIs | read-only | mandatory | The number of Zone Information packets that have been sent on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.7 | ColumnaurpConnectionRecvZIs | read-only | mandatory | The number of Zone Information packets that have been received on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.8 | ColumnaurpConnectionSentGZNs | read-only | mandatory | The number of Get Zone Nets Request packets that have been sent on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.9 | ColumnaurpConnectionRecvGZNs | read-only | mandatory | The number of Get Zone Nets Request packets that have been received on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.10 | ColumnaurpConnectionSentGDZLs | read-only | mandatory | The number of Get Domain Zone List Request packets that have sent on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.11 | ColumnaurpConnectionRecvGDZLs | read-only | mandatory | The number of Get Domain Zone List Request packets that have received on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.12 | ColumnaurpConnectionBadSequence | read-only | mandatory | The number of unexpected sequence numbers detected on this connection. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.13 | ColumnaurpConnectionUpdateSendingRate | read-only | mandatory | The rate at which routing table updates are sent on this connection, in seconds. |
| 1.3.6.1.4.1.304.1.3.1.9.2.2.1.14 | ColumnaurpConnectionLastHeardFromTimeout | read-only | mandatory | The number of seconds to wait after last hearing from the remote router before sending a tickle. |
| 1.3.6.1.4.1.304.1.3.1.9.2.3 | TableaurpRemapRangeTable | not-accessible | mandatory | The list of tunnel remap ranges for this router. This contains only one entry for each port in most cases. |
| 1.3.6.1.4.1.304.1.3.1.9.2.3.1 | RowaurpRemapRangeEntry | not-accessible | mandatory | The description of one of the remap ranges on this router. |
| 1.3.6.1.4.1.304.1.3.1.9.2.3.1.1 | ColumnaurpRemapRangePortIndex | read-only | mandatory | The AppleTalk port associated with this remap range. |
| 1.3.6.1.4.1.304.1.3.1.9.2.3.1.2 | ColumnaurpRemapRangeNetStart | read-only | mandatory | The first AppleTalk network address in the range of network addresses to be used for remapping imported networks. |
| 1.3.6.1.4.1.304.1.3.1.9.2.3.1.3 | ColumnaurpRemapRangeNetEnd | read-only | mandatory | The last AppleTalk network address in the range of network addresses to be used for remapping imported networks. |
| 1.3.6.1.4.1.304.1.3.1.9.2.3.1.4 | ColumnaurpRemapRangeRouterAddress | read-only | mandatory | The address of the router for which this remap range applies. A null string indicates the remap range will be used for all connections on this port. |
| 1.3.6.1.4.1.304.1.3.1.9.2.4 | TableaurpRemapTable | not-accessible | mandatory | The list of remapped networks. |
| 1.3.6.1.4.1.304.1.3.1.9.2.4.1 | RowaurpRemapEntry | not-accessible | mandatory | The description of an imported, remapped network. |
| 1.3.6.1.4.1.304.1.3.1.9.2.4.1.1 | ColumnaurpRemapPortIndex | read-only | mandatory | The AppleTalk port associated with this remapped network. |
| 1.3.6.1.4.1.304.1.3.1.9.2.4.1.2 | ColumnaurpRemapNetStart | read-only | mandatory | The first AppleTalk network address of the remap range for this imported network. |
| 1.3.6.1.4.1.304.1.3.1.9.2.4.1.3 | ColumnaurpRemapNetEnd | read-only | mandatory | The last AppleTalk network address of the remap range for this imported network. |
| 1.3.6.1.4.1.304.1.3.1.9.2.4.1.4 | ColumnaurpRemapUIDI | read-only | mandatory | The domain identifier portion of the unique identifier associated with the imported network that is being remapped. |
| 1.3.6.1.4.1.304.1.3.1.9.2.4.1.5 | ColumnaurpRemapUINetStart | read-only | mandatory | The first AppleTalk network address of the range portion of the unique identifier associated with the imported network that is being remapped. |
| 1.3.6.1.4.1.304.1.3.1.9.2.4.1.6 | ColumnaurpRemapUINetEnd | read-only | mandatory | The last AppleTalk network address of the range portion of the unique identifier associated with the imported network that is being remapped. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5 | TableaurpClusterTable | not-accessible | mandatory | A list of entries describing the device's clusters of imported, remapped networks. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5.1 | RowaurpClusterEntry | not-accessible | mandatory | An entry describing one of the device's clusters of imported, remapped networks. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5.1.1 | ColumnaurpClusterPortIndex | read-only | mandatory | The AppleTalk port associated with this cluster. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5.1.2 | ColumnaurpClusterIndex | read-only | mandatory | A unique value for each of the device's clusters on a port. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5.1.3 | ColumnaurpClusterNetStart | read-only | mandatory | The first AppleTalk network address of the range associated with this cluster. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5.1.4 | ColumnaurpClusterNetEnd | read-only | mandatory | The last AppleTalk network address of the range associated with this cluster. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5.1.5 | ColumnaurpClusterUIDI | read-only | mandatory | The domain identifier portion of the unique identifier associated with the imported networks that are being clustered. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5.1.6 | ColumnaurpClusterNumberOfNetworks | read-only | mandatory | The number of imported, remapped networks contained in this cluster. |
| 1.3.6.1.4.1.304.1.3.1.9.2.5.1.7 | ColumnaurpClusterHopCount | read-only | mandatory | The number of hops that this cluster is away from this router. |
| 1.3.6.1.4.1.304.1.3.1.9.2.6 | TableaurpClusterMemberTable | not-accessible | mandatory | A list of entries describing the imported, remapped network ranges comprising the device's clusters of imported, remapped networks. |
| 1.3.6.1.4.1.304.1.3.1.9.2.6.1 | RowaurpClusterMemberEntry | not-accessible | mandatory | An entry describing a network range in one of the device's clusters of imported, remapped networks. |
| 1.3.6.1.4.1.304.1.3.1.9.2.6.1.1 | ColumnaurpClusterMemberPortIndex | read-only | mandatory | The AppleTalk port corresponding to the tunnel associated with this clustered network range. |
| 1.3.6.1.4.1.304.1.3.1.9.2.6.1.2 | ColumnaurpClusterMemberIndex | read-only | mandatory | The unique value associated with the cluster to which this clustered imported network range belongs. The cluster represented by a particular value of this obje… |
| 1.3.6.1.4.1.304.1.3.1.9.2.6.1.3 | ColumnaurpClusterMemberUINetStart | read-only | mandatory | The first AppleTalk network address of the range portion of the unique identifier associated with the imported network range that is being clustered. |
| 1.3.6.1.4.1.304.1.3.1.9.2.6.1.4 | ColumnaurpClusterMemberUINetEnd | read-only | mandatory | The last AppleTalk network address of the range portion of the unique identifier associated with the imported network range that is being clustered. |
| 1.3.6.1.4.1.304.1.3.1.10 | NodebootParams | |||
| 1.3.6.1.4.1.304.1.3.1.10.1 | ScalardeviceRestart | read-write | mandatory | The value of this object returned in response to an SNMP Get or Get-Next request is always 'dontRestart(1)'. Setting this object to the value 'restart(2)' will… |
| 1.3.6.1.4.1.304.1.3.1.10.2 | ScalarrestoreDefaultConfig | read-write | mandatory | The value of this object returned in response to an SNMP Get or Get-Next Request is always 'dontRestore(1)'. Setting this object to the value 'restore(2)' will… |
| 1.3.6.1.4.1.304.1.3.1.10.3 | NodetftpParams | |||
| 1.3.6.1.4.1.304.1.3.1.10.3.1 | ScalartftpMaxRetries | read-write | mandatory | The maximum number of times the device will retransmit a Trivial File Transfer Protocol (TFTP) packet before terminating a TFTP transfer. The total number of t… |
| 1.3.6.1.4.1.304.1.3.1.10.3.2 | ScalartftpServerName | read-write | mandatory | The name of the TFTP server from which to read or write the device's configuration or from which to read a firmware image. The value of this object can be a fu… |
| 1.3.6.1.4.1.304.1.3.1.10.3.3 | ScalartftpFwFileName | read-write | mandatory | The file name of the firmware image file to read from the TFTP server. |
| 1.3.6.1.4.1.304.1.3.1.10.3.4 | ScalartftpConfigFileName | read-write | mandatory | The file name of the configuration file to read from or write to the TFTP server. |
| 1.3.6.1.4.1.304.1.3.1.10.3.5 | ScalartftpReadFw | read-write | mandatory | Specifying the value 'readFw(3)' in an SNMP Set Request causes the device to attempt to replace its firmware image stored in Flash-Erasable Programmable Read-O… |
| 1.3.6.1.4.1.304.1.3.1.10.3.6 | ScalartftpReadConfig | read-write | mandatory | Specifying the value 'readConfig(3)' in an SNMP Set Request causes the device to attempt to replace its configuration stored in non-volatile read-only memory (… |
| 1.3.6.1.4.1.304.1.3.1.10.3.7 | ScalartftpWriteConfig | read-write | mandatory | Specifying the value 'writeConfig(3)' in an SNMP Set Request causes the device to attempt to write its configuration stored in non-volatile read-only memory (N… |
| 1.3.6.1.4.1.304.1.3.1.10.3.8 | ScalartftpCurrentTransferOctets | read-only | mandatory | Indicates the number of octets transferred during the current TFTP transfer. The value of this object is reset to zero when a TFTP transfer is initiated via a … |
| 1.3.6.1.4.1.304.1.3.1.11 | NodesnmpParams | |||
| 1.3.6.1.4.1.304.1.3.1.11.1 | TablesnmpIpTrapRcvrTable | not-accessible | mandatory | A list of entries containing information about network management stations with IP addresses that are to receive traps generated by this device over UDP. The s… |
| 1.3.6.1.4.1.304.1.3.1.11.1.1 | RowsnmpIpTrapRcvrEntry | not-accessible | mandatory | An entry containing information about a single network management station with an IP address that is to receive traps generated by this device over UDP. |
| 1.3.6.1.4.1.304.1.3.1.11.1.1.1 | ColumnsnmpIpTrapRcvrName | read-only | mandatory | The name of this IP trap receiver. The value of this object can be a fully- or partially-qualified domain name system (dns) name, or it can be an IP address in… |
| 1.3.6.1.4.1.304.1.3.1.11.1.1.2 | ColumnsnmpIpTrapRcvrCommunity | read-write | mandatory | The community string to be specified in traps sent to this IP trap receiver. |
| 1.3.6.1.4.1.304.1.3.1.11.1.1.3 | ColumnsnmpIpTrapRcvrIpAddress | read-only | mandatory | The IP address of this IP trap receiver. The value of this object is the IP address that was most recently obtained by the device from the Domain Name System f… |
| 1.3.6.1.4.1.304.1.3.1.11.1.1.4 | ColumnsnmpIpTrapRcvrStatus | read-write | mandatory | The value of this object indicates whether the associated entry in the snmpIpTrapRcvrTable is in use or not. Setting this object to the value 'invalid(2)' has … |
| 1.3.6.1.4.1.304.1.3.1.11.2 | TablesnmpAtTrapRcvrTable | not-accessible | mandatory | A list of entries containing information about network management stations with AppleTalk addresses that are to receive traps generated by this device over DDP… |
| 1.3.6.1.4.1.304.1.3.1.11.2.1 | RowsnmpAtTrapRcvrEntry | not-accessible | mandatory | An entry containing information about a single network management station with an AppleTalk address that is to receive traps generated by this device over DDP. |
| 1.3.6.1.4.1.304.1.3.1.11.2.1.1 | ColumnsnmpAtTrapRcvrNBPObject | read-write | mandatory | The object component of the AppleTalk Name Binding Protocol (NBP) name of this trap receiver. |
| 1.3.6.1.4.1.304.1.3.1.11.2.1.2 | ColumnsnmpAtTrapRcvrNBPZone | read-write | mandatory | The zone component of the AppleTalk Name Binding Protocol (NBP) name of this trap receiver. |
| 1.3.6.1.4.1.304.1.3.1.11.2.1.3 | ColumnsnmpAtTrapRcvrCommunity | read-write | mandatory | The community string to be specified in traps sent to this trap receiver. |
| 1.3.6.1.4.1.304.1.3.1.11.2.1.4 | ColumnsnmpAtTrapRcvrDdpAddress | read-only | mandatory | The DDP address of this trap receiver, as determined by the most recent NBP Lookup. The value of this object will be three octets of zero if the DDP address of… |
| 1.3.6.1.4.1.304.1.3.1.11.2.1.5 | ColumnsnmpAtTrapRcvrLastConfirmTime | read-only | mandatory | The time (in human-readable form) at which the DDP address of this trap receiver was last determined by an NBP Lookup or confirmed by an NBP Confirm. The value… |
| 1.3.6.1.4.1.304.1.3.1.11.2.1.6 | ColumnsnmpAtTrapRcvrStatus | read-write | mandatory | The value of this object indicates whether the associated entry in the snmpAtTrapRcvrTable is in use or not. Setting this object to the value 'invalid(2)' has … |
| 1.3.6.1.4.1.304.1.3.1.11.3 | ScalarsnmpAtTrapRcvrCacheEntryLifetime | read-write | mandatory | The cache entry lifetime, in seconds, of bindings between NBP names and DDP addresses in the snmpAtTrapRcvrTable. The value of this object must be at least 60 … |
| 1.3.6.1.4.1.304.1.3.1.11.4 | ScalarsnmpUnAuthIpAddr | read-only | mandatory | The IP address of the last management station that attempted to access this agent with an invalid community string. This object is used as a variable binding i… |
| 1.3.6.1.4.1.304.1.3.1.11.5 | ScalarsnmpUnAuthCommunity | read-only | mandatory | The community string specified by the most recent unauthenticated attempt to access this agent. This object is used as a variable binding in an Authentication … |
| 1.3.6.1.4.1.304.1.3.1.12 | NodeisdnParams | |||
| 1.3.6.1.4.1.304.1.3.1.12.1 | ScalarisdnSwitchType | read-write | mandatory | The type of telephone company central office switch to which the device's ISDN Basic Rate Interface (BRI) line is connected. |
| 1.3.6.1.4.1.304.1.3.1.12.2 | ScalarisdnDirNum1 | read-write | mandatory | The device's primary ISDN directory number. |
| 1.3.6.1.4.1.304.1.3.1.12.3 | ScalarisdnSpid1 | read-write | mandatory | The device's primary service profile identifier (SPID). |
| 1.3.6.1.4.1.304.1.3.1.12.4 | ScalarisdnDirNum2 | read-write | mandatory | The device's secondary ISDN directory number. |
| 1.3.6.1.4.1.304.1.3.1.12.5 | ScalarisdnSpid2 | read-write | mandatory | The device's secondary service profile identifier (SPID). |
| 1.3.6.1.4.1.304.1.3.1.12.6 | TableconnProfileTable | not-accessible | mandatory | A list of entries providing configuration information for the device's possible on-demand WAN connections to remote peers via ISDN. This table supports 'concep… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1 | RowconnProfileEntry | not-accessible | mandatory | An entry containing configuration information for one of the device's possible on-demand WAN connections to remote peers via ISDN. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.1 | ColumnconnProfIndex | read-only | mandatory | A unique value for each of the device's possible on-demand WAN connections via ISDN. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.2 | ColumnconnProfName | read-write | mandatory | The name of the remote peer described by this connection profile. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.3 | ColumnconnProfEnable | read-write | mandatory | Indicates whether or not this connection profile is currently 'enabled.' A disabled connection profile retains its values, but may not be used to establish a c… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.4 | ColumnconnProfPermittedUse | read-write | mandatory | The permitted use of this connection profile. If the value of this object is 'dialIn(1)', the device will accept an incoming call from, but will not originate … |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.5 | ColumnconnProfIsdnDialNum | read-write | mandatory | The string of digits required to place a call to the remote peer described by this connection profile. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.6 | ColumnconnProfIsdnBandwidth | read-write | mandatory | The number of ISDN B-channels the device will use for the connection to the remote peer described by this connection profile. If the value of this object is 'o… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.7 | ColumnconnProfDialOnDemand | read-write | mandatory | Indicates whether or not the device will initiate an outgoing call to establish a connection with the remote peer described by this connection profile when it … |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.8 | ColumnconnProfDialBack | read-write | mandatory | Indicates whether or not the device will hang up and initiate an outgoing call to the remote peer described in this connection profile upon receiving an incomi… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.9 | ColumnconnProfIsdnOutDataRate | read-write | mandatory | The type of circuit-switched data service to use when placing an outgoing call to the remote peer described by this connection profile. If the value of this ob… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.10 | ColumnconnProfRemIpAddr | read-write | mandatory | The IP address of the remote peer's LAN interface. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.11 | ColumnconnProfRemSubnetMask | read-write | mandatory | The subnet mask of the remote peer's LAN interface. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.12 | ColumnconnProfRxRip | read-write | mandatory | Indicates whether or not the device will receive RIP packets over the WAN connection from the remote peer. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.13 | ColumnconnProfTxRip | read-write | mandatory | Indicates whether or not the device will transmit RIP packets over the WAN connection to the remote peer. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.14 | ColumnconnProfFilterSetIndex | read-write | mandatory | Indicates the set of filters to be used to filter packets received and transmitted over the WAN connection to the remote peer. The filter set identified by a p… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.15 | ColumnconnProfIdleSeconds | read-write | mandatory | Indicates the number of seconds during which there must be no outbound traffic over a demand connection to the remote peer for the device to clear the call. Th… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.16 | ColumnconnProfPppMaxRecvUnit | read-write | mandatory | Indicates the size of the largest PPP packet that can be received over the WAN connection with the remote peer. |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.17 | ColumnconnProfPppLinkCompression | read-write | mandatory | Indicates whether or not the device will attempt to negotiate PPP link compression when establishing a connection to the remote peer. If this object has the va… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.18 | ColumnconnProfPppSendAuthProt | read-write | mandatory | Indicates the PPP authentication protocol that the device will use to authenticate itself to the remote peer described by this connection profile. If the value… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.19 | ColumnconnProfPppSendAuthName | read-write | mandatory | If the value of the connProfPppSendAuthProt object is 'authPAP(2)', then the value of this object is the Peer-ID that the device will send to the remote peer i… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.20 | ColumnconnProfPppSendAuthSecret | read-write | mandatory | If the value of the connProfPppSendAuthProt object is 'authPAP(2)', then the value of this object is the Password that the device will send to the remote peer … |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.21 | ColumnconnProfPppRecvAuthName | read-write | mandatory | If the value of the ansProfPppRecvAuthProt object is 'authPAP(2)', then the value of this object is the Peer-ID that the remote peer must specify in its PAP Au… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.22 | ColumnconnProfPppRecvAuthSecret | read-write | mandatory | If the value of the ansProfPppRecvAuthProt object is 'authPAP(2)', then the value of this object is the Password that the remote peer must specify in its PAP A… |
| 1.3.6.1.4.1.304.1.3.1.12.6.1.23 | ColumnconnProfStatus | read-write | mandatory | The status of this connection profile. Setting the value of this object to 'invalid(4)' has the effect of invalidating the corresponding entry in the connProfi… |
| 1.3.6.1.4.1.304.1.3.1.12.7 | ScalaransProfConnProfRequired | read-write | mandatory | Indicates whether or not an incoming call must match a connection profile entry in the connProfileTable. If the value of this object is 'connProfRequired(1)', … |
| 1.3.6.1.4.1.304.1.3.1.12.8 | ScalaransProfIsdnBandwidth | read-write | mandatory | The number of ISDN B-channels the device will use for incoming calls from remote peers not matching a connection profile in the connProfileTable. If the value … |
| 1.3.6.1.4.1.304.1.3.1.12.9 | ScalaransProfIsdnInForce56K | read-write | mandatory | Indicates whether or not the device will ignore the data rate indicated in incoming ISDN calls and assume a data rate of 56K. If the value of this object is 'd… |
| 1.3.6.1.4.1.304.1.3.1.12.10 | ScalaransProfRxRip | read-write | mandatory | Indicates whether or not the device will receive RIP packets over a WAN connection from a remote peer established for an incoming call not matching a connectio… |
| 1.3.6.1.4.1.304.1.3.1.12.11 | ScalaransProfTxRip | read-write | mandatory | Indicates whether or not the device will transmit RIP packets over a WAN connection to a remote peer established for an incoming call not matching a connection… |
| 1.3.6.1.4.1.304.1.3.1.12.12 | ScalaransProfFilterSetIndex | read-write | mandatory | Indicates the set of filters to be used to filter packets received and transmitted over the WAN connection to a remote peer not matching a connection profile i… |
| 1.3.6.1.4.1.304.1.3.1.12.13 | ScalaransProfIdleSeconds | read-write | mandatory | Indicates the number of seconds during which there must be no outbound traffic over a WAN connection to a remote peer not matching a connection profile in the … |
| 1.3.6.1.4.1.304.1.3.1.12.14 | ScalaransProfPppMaxRecvUnit | read-write | mandatory | Indicates the size of the largest PPP packet that can be received over a WAN connection with a remote peer established for an incoming call not matching a conn… |
| 1.3.6.1.4.1.304.1.3.1.12.15 | ScalaransProfPppLinkCompression | read-write | mandatory | Indicates whether or not the device will attempt to negotiate PPP link compression for a WAN connection with a remote peer established for an incoming call not… |
| 1.3.6.1.4.1.304.1.3.1.12.16 | ScalaransProfPppRecvAuthProt | read-write | mandatory | Indicates the PPP authentication protocol that the device will require a remote peer to use to authenticate itself when the device receives an incoming call fr… |
| 1.3.6.1.4.1.304.1.3.1.12.17 | ScalaransProfChapChallengeName | read-write | mandatory | If the value of the ansProfConnProfRequired object is 'connProfRequired(1)', and the value of the ansProfPppRecvAuthProt object is 'authCHAP(3)', then the valu… |
| 1.3.6.1.4.1.304.1.3.1.12.18 | TableschedConnTable | not-accessible | mandatory | A list of entries describing automatic, scheduled establishment of connections to the device's remote peers. This table supports 'conceptual row creation' acco… |
| 1.3.6.1.4.1.304.1.3.1.12.18.1 | RowschedConnEntry | not-accessible | mandatory | An entry containing information describing the automatic, scheduled establishment of a connection to one of the device's remote peers. |
| 1.3.6.1.4.1.304.1.3.1.12.18.1.1 | ColumnschedConnIndex | read-only | mandatory | A unique value that identifies this scheduled connection. |
| 1.3.6.1.4.1.304.1.3.1.12.18.1.2 | ColumnschedConnEnable | read-write | mandatory | Indicates whether or not the scheduled connection described by this entry is enabled. |
| 1.3.6.1.4.1.304.1.3.1.12.18.1.3 | ColumnschedConnDayMask | read-write | mandatory | The value of this object indicates whether this entry corresponds to a one-time scheduled connection or a recurring scheduled connection, and, for a recurring … |
| 1.3.6.1.4.1.304.1.3.1.12.18.1.4 | ColumnschedConnStartTime | read-write | mandatory | The time at which the device will attempt to originate a connection with the remote peer. If the value of the schedConnDayMask object is between 1 and 127, the… |
| 1.3.6.1.4.1.304.1.3.1.12.18.1.5 | ColumnschedConnDuration | read-write | mandatory | The duration of this scheduled connection in seconds. |
| 1.3.6.1.4.1.304.1.3.1.12.18.1.6 | ColumnschedConnRemPeer | read-write | mandatory | The value of this object identifies the remote peer with which the device will attempt to originate the scheduled connection described by this entry. The remot… |
| 1.3.6.1.4.1.304.1.3.1.12.18.1.7 | ColumnschedConnStatus | read-write | mandatory | Indicates the status of this scheduled connection. Setting the value of this object to 'invalid(2)' has the effect of invalidating the corresponding entry in t… |
| 1.3.6.1.4.1.304.1.3.1.13 | NodeconsoleParams | |||
| 1.3.6.1.4.1.304.1.3.1.13.1 | ScalarconsolePortSpeed | read-write | mandatory | The speed of the console port in bits per second. |
| 1.3.6.1.4.1.304.1.3.1.13.2 | ScalarconsolePortDataBits | read-write | mandatory | The console port's number of data bits. |
| 1.3.6.1.4.1.304.1.3.1.13.3 | ScalarconsolePortStopBits | read-write | mandatory | The console port's number of stop bits. |
| 1.3.6.1.4.1.304.1.3.1.13.4 | ScalarconsolePortParity | read-write | mandatory | The console port's parity setting. |
| 1.3.6.1.4.1.304.1.3.1.13.5 | ScalarconsolePortRxChars | read-only | mandatory | The number of good characters received by the console port. |
| 1.3.6.1.4.1.304.1.3.1.13.6 | ScalarconsolePortTxChars | read-only | mandatory | The number of characters transmitted by the console port. |
| 1.3.6.1.4.1.304.1.3.1.13.7 | ScalarconsolePortParityErrors | read-only | mandatory | The number of characters received by the console port with a parity error indication. |
| 1.3.6.1.4.1.304.1.3.1.13.8 | ScalarconsolePortFramingErrors | read-only | mandatory | The number of characters received by the console port with a framing error indication. |
| 1.3.6.1.4.1.304.1.3.1.13.9 | ScalarconsolePortOverrunErrors | read-only | mandatory | The number of characters received by the console port with an overrun error indication. |
| 1.3.6.1.4.1.304.1.3.1.14 | NodepcCardParams | |||
| 1.3.6.1.4.1.304.1.3.1.14.1 | TablepcCardSlotTable | not-accessible | mandatory | A list of entries providing information about the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.1.1 | RowpcCardSlotEntry | not-accessible | mandatory | A entry providing information about one of the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.1.1.1 | ColumnpcCardSlotIndex | read-only | mandatory | A unique integer for each of the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.1.1.2 | ColumnpcCardSlotCardPresent | read-only | mandatory | Indicates whether or not a PC Card is present in this PC Card slot. |
| 1.3.6.1.4.1.304.1.3.1.14.2 | TablepcCardCardTable | not-accessible | mandatory | A list of entries providing information about the PC Cards present in the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.2.1 | RowpcCardCardEntry | not-accessible | mandatory | An entry providing information about one of the PC Cards present in one of the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.2.1.1 | ColumnpcCardCardMfrName | read-only | mandatory | The manufacturer name of the PC Card described by this entry. The value of this object is the first ASCIIZ string in the TPLLV1_INFO field of the 'Level 1 Vers… |
| 1.3.6.1.4.1.304.1.3.1.14.2.1.2 | ColumnpcCardCardProdName | read-only | mandatory | The product name of the PC Card described by this entry. The value of this object is the second ASCIIZ string in the TPLLV1_INFO field of the 'Level 1 Version/… |
| 1.3.6.1.4.1.304.1.3.1.14.2.1.3 | ColumnpcCardCardProdInfo1 | read-only | mandatory | The first additional product information string of the PC Card described by this entry. The value of this object is the third ASCIIZ string in the TPLLV1_INFO … |
| 1.3.6.1.4.1.304.1.3.1.14.2.1.4 | ColumnpcCardCardProdInfo2 | read-only | mandatory | The second additional product information string of the PC Card described by this entry. The value of this object is the fourth ASCIIZ string in the TPLLV1_INF… |
| 1.3.6.1.4.1.304.1.3.1.14.2.1.5 | ColumnpcCardCardFunction | read-only | mandatory | A code indicating the major function of the PC Card described by this entry. The value of this object is the value of the third octet of the Function ID tuple … |
| 1.3.6.1.4.1.304.1.3.1.14.3 | TablepcCardModemTable | not-accessible | mandatory | A list of entries providing information about the PC Card modems present in the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.3.1 | RowpcCardModemEntry | not-accessible | mandatory | An entry providing information about one of the PC Card modems present in one of the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.3.1.1 | ColumnpcCardModemActive | read-only | mandatory | The state of the PC Card modem described by this entry. The value 'inactive(1)' indicates that there is no active connection. The value 'active(2)' indicates t… |
| 1.3.6.1.4.1.304.1.3.1.14.3.1.2 | ColumnpcCardModemSessions | read-only | mandatory | The number of sessions initiated using this PC Card modem since it was last inserted. The value of this object is incremented each time the modem goes off hook. |
| 1.3.6.1.4.1.304.1.3.1.14.3.1.3 | ColumnpcCardModemTotalRxChars | read-only | mandatory | The total number of good characters received from this PC Card modem since it was last inserted. |
| 1.3.6.1.4.1.304.1.3.1.14.3.1.4 | ColumnpcCardModemTotalTxChars | read-only | mandatory | The total number of characters transmitted to this PC Card modem since it was last inserted. |
| 1.3.6.1.4.1.304.1.3.1.14.4 | TablepcCardModemConnTable | not-accessible | mandatory | A list of entries providing information about the active sessions using the PC Card modems present in the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.4.1 | RowpcCardModemConnEntry | not-accessible | mandatory | An entry providing information about an active session using the PC Card modem present in one of the device's PC Card slots. |
| 1.3.6.1.4.1.304.1.3.1.14.4.1.1 | ColumnpcCardModemConnSpeed | read-only | mandatory | The speed, in bits per second, of the active modem connection described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.14.4.1.2 | ColumnpcCardModemConnDataBits | read-only | mandatory | The number of data bits for the active modem connection described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.14.4.1.3 | ColumnpcCardModemConnStopBits | read-only | mandatory | The number of stop bits for the active modem connection described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.14.4.1.4 | ColumnpcCardModemConnParity | read-only | mandatory | The parity setting for the active modem connection described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.14.4.1.5 | ColumnpcCardModemConnRxChars | read-only | mandatory | The number of good characters received from the PC Card modem during the active modem connection described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.14.4.1.6 | ColumnpcCardModemConnTxChars | read-only | mandatory | The number of characters transmitted to the PC Card modem during the active modem connection described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.15 | NodelogParams | |||
| 1.3.6.1.4.1.304.1.3.1.15.1 | ScalareventLogEnable | read-write | mandatory | The value of this object indicates whether or not system event logging is currently enabled. Changes to this object take effect immediately. |
| 1.3.6.1.4.1.304.1.3.1.15.2 | ScalareventLogSize | read-only | mandatory | The maximum number of entries retrievable from the system event log. If the value of this object is greater than the value of the eventLogCount object, then on… |
| 1.3.6.1.4.1.304.1.3.1.15.3 | ScalareventLogCount | read-write | mandatory | The total number of events logged to the system event log. If the value of this object exceeds the value of the eventLogSize object, only the most recent event… |
| 1.3.6.1.4.1.304.1.3.1.15.4 | TableeventLogTable | not-accessible | mandatory | A list of system event log entries. |
| 1.3.6.1.4.1.304.1.3.1.15.4.1 | RoweventLogEntry | not-accessible | mandatory | A single system event log entry. |
| 1.3.6.1.4.1.304.1.3.1.15.4.1.1 | ColumneventLogIndex | read-only | mandatory | A unique value for each entry in the event log. Its value is between 1 and the minimum of the value of the eventLogSize and eventLogCount objects. The oldest e… |
| 1.3.6.1.4.1.304.1.3.1.15.4.1.2 | ColumneventLogTime | read-only | mandatory | The time (according to the system clock) in human-readable form at which this system event log entry was logged. |
| 1.3.6.1.4.1.304.1.3.1.15.4.1.3 | ColumneventLogDescr | read-only | mandatory | A human-readable string describing the event represented by this system event log entry. |
| 1.3.6.1.4.1.304.1.3.1.15.4.1.4 | ColumneventLogDetail | read-only | mandatory | A human-readable string providing more detailed information about the event represented by this system event log entry. |
| 1.3.6.1.4.1.304.1.3.1.15.4.1.5 | ColumneventLogRawEntry | read-only | mandatory | The raw, unformatted system event log entry as it appears internally. |
| 1.3.6.1.4.1.304.1.3.1.15.5 | ScalarisdnLogEnable | read-write | mandatory | The value of this object indicates whether or not ISDN event logging is currently enabled. Changes to this object take effect immediately. |
| 1.3.6.1.4.1.304.1.3.1.15.6 | ScalarisdnLogSize | read-only | mandatory | The maximum number of entries retrievable from the device's ISDN event log. If the value of this object is greater than the value of the isdnLogCount object, t… |
| 1.3.6.1.4.1.304.1.3.1.15.7 | ScalarisdnLogCount | read-write | mandatory | The total number of events logged to the ISDN event log. If the value of this object exceeds the value of the isdnLogSize object, only the most recent isdnLogS… |
| 1.3.6.1.4.1.304.1.3.1.15.8 | TableisdnLogTable | not-accessible | mandatory | A list of ISDN event log entries. |
| 1.3.6.1.4.1.304.1.3.1.15.8.1 | RowisdnLogEntry | not-accessible | mandatory | A single ISDN event log entry. |
| 1.3.6.1.4.1.304.1.3.1.15.8.1.1 | ColumnisdnLogIndex | read-only | mandatory | A unique value for each entry in the ISDN event log. Its value is between 1 and the minimum of the value of the isdnLogSize and isdnLogCount objects. The oldes… |
| 1.3.6.1.4.1.304.1.3.1.15.8.1.2 | ColumnisdnLogTime | read-only | mandatory | The time (according to the system clock) in human-readable form at which this ISDN event log entry was logged. |
| 1.3.6.1.4.1.304.1.3.1.15.8.1.3 | ColumnisdnLogDescr | read-only | mandatory | A human-readable string describing the ISDN event represented by this ISDN event log entry. |
| 1.3.6.1.4.1.304.1.3.1.15.8.1.4 | ColumnisdnLogDetail | read-only | mandatory | A human-readable string providing more detailed information about the ISDN event represented by this ISDN event log entry. |
| 1.3.6.1.4.1.304.1.3.1.15.8.1.5 | ColumnisdnLogRawEntry | read-only | mandatory | The raw, unformatted ISDN log entry as it appears internally. |
| 1.3.6.1.4.1.304.1.3.1.16 | NodefilterParams | |||
| 1.3.6.1.4.1.304.1.3.1.16.1 | TablefilterSetTable | not-accessible | mandatory | A list of entries providing information about the device's packet filter sets. This table supports 'conceptual row creation' according to section 3.2(3) of RFC… |
| 1.3.6.1.4.1.304.1.3.1.16.1.1 | RowfilterSetEntry | not-accessible | mandatory | An entry providing information about one of the device's packet filter sets. |
| 1.3.6.1.4.1.304.1.3.1.16.1.1.1 | ColumnfilterSetIndex | read-only | mandatory | A unique value for each of the device's packet filter sets. |
| 1.3.6.1.4.1.304.1.3.1.16.1.1.2 | ColumnfilterSetEnable | read-only | mandatory | Indicates whether or not the filter set described by this entry is enabled. |
| 1.3.6.1.4.1.304.1.3.1.16.1.1.3 | ColumnfilterSetName | read-write | mandatory | An optional descriptive name for the packet filter set described by this entry. |
| 1.3.6.1.4.1.304.1.3.1.16.1.1.4 | ColumnfilterSetStatus | read-only | mandatory | The status of this filter set entry. Setting this object to the value 'invalid(2)' has the effect of invalidating the corresponding entry in the filterSetTable… |
| 1.3.6.1.4.1.304.1.3.1.16.2 | TableipFilterTable | not-accessible | mandatory | A list of entries providing information about the device's IP packet filters. This table supports 'conceptual row creation' according to section 3.2(3) of RFC … |
| 1.3.6.1.4.1.304.1.3.1.16.2.1 | RowipFilterEntry | not-accessible | mandatory | An entry providing information about one of the device's IP packet filters. |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.1 | ColumnipFilterDirection | read-only | mandatory | Indicates whether the IP packet filter described by this entry is an input filter or an output filter. |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.2 | ColumnipFilterIndex | read-only | mandatory | A unique value for each of the input and output packet filters in the filter set associated with this IP packet filter. |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.3 | ColumnipFilterEnable | read-write | mandatory | Indicates whether the IP packet filter described by this entry is enabled or disabled. |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.4 | ColumnipFilterForward | read-write | mandatory | Indicates whether the device will forward or drop an IP packet matching the parameters of this IP packet filter. |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.5 | ColumnipFilterSrcMask | read-write | mandatory | Indicates the value that the device will logically AND with the source IP address in an IP packet being passed through this filter before that address is compa… |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.6 | ColumnipFilterSrcAddr | read-write | mandatory | Indicates the value that must be produced by the logical AND of the source IP address in an IP packet and the value of ipFilterSrcMask for the IP packet to sat… |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.7 | ColumnipFilterDstMask | read-write | mandatory | Indicates the value that the device will logically AND with the destination IP address in an IP packet being passed through this filter before that address is … |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.8 | ColumnipFilterDstAddr | read-write | mandatory | Indicates the value that must be produced by the logical AND of the destination IP address in an IP packet and the value of ipFilterDstMask for the IP packet t… |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.9 | ColumnipFilterProtType | read-write | mandatory | Indicates the value that must be present in the protocol field (octet 10) of the IP header of an IP packet for the packet to satisfy this filter. The value zer… |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.10 | ColumnipFilterSrcPortComparison | read-write | mandatory | Indicates the relational operator that the device will use to compare the udp or tcp source port specified in a udp or tcp packet with the value of the corresp… |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.11 | ColumnipFilterSrcPort | read-write | mandatory | Indicates the value to which the device will compare the udp or tcp source port specified in an udp or tcp packet to determine whether or not the packet satisf… |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.12 | ColumnipFilterDstPortComparison | read-write | mandatory | Indicates the relational operator that the device will use to compare the udp or tcp destination port specified in a udp or tcp packet with the value of the co… |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.13 | ColumnipFilterDstPort | read-write | mandatory | Indicates the value to which the device will compare the udp or tcp destination port specified in an udp or tcp packet to determine whether or not the packet s… |
| 1.3.6.1.4.1.304.1.3.1.16.2.1.14 | ColumnipFilterStatus | read-write | mandatory | Indicates the status of this IP filter entry. Setting this object to the value 'invalid(2)' has the effect of invalidating the corresponding entry in the ipFil… |
| 1.3.6.1.4.1.304.1.3.1.16.3 | TablegenericFilterTable | not-accessible | mandatory | A list of entries providing information about the device's generic packet filters. This table supports 'conceptual row creation' according to section 3.2(3) of… |
| 1.3.6.1.4.1.304.1.3.1.16.3.1 | RowgenericFilterEntry | not-accessible | mandatory | An entry providing information about one of the device's generic packet filters. |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.1 | ColumngenericFilterDirection | read-only | mandatory | Indicates whether the generic packet filter described by this entry is an input filter or an output filter. |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.2 | ColumngenericFilterIndex | read-only | mandatory | A unique value for each of the input and output packet filters in the filter set associated with this generic packet filter. |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.3 | ColumngenericFilterEnable | read-write | mandatory | Indicates whether the generic packet filter described by this entry is enabled or disabled. |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.4 | ColumngenericFilterForward | read-write | mandatory | Indicates whether the device will forward or drop a packet matching the parameters of this generic packet filter. |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.5 | ColumngenericFilterOffset | read-write | mandatory | Indicates the offset (in octets) from the start of the packet to the data to which this filter will be applied. |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.6 | ColumngenericFilterMask | read-write | mandatory | Indicates the mask that the device will logically AND with the data in a packet being passed through this filter before that data is compared with the value of… |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.7 | ColumngenericFilterValue | read-write | mandatory | Indicates the value against which the device will compare the value produced by the logical AND of the data in a packet and the value of the corresponding inst… |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.8 | ColumngenericFilterComparison | read-write | mandatory | Indicates the relational operator that the device will use when comparing the value produced by the logical AND of the data in a packet and the value of the co… |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.9 | ColumngenericFilterChained | read-write | mandatory | Indicates whether or not the device will chain this filter together with the next generic filter in the associated filter set when deciding whether or not to f… |
| 1.3.6.1.4.1.304.1.3.1.16.3.1.10 | ColumngenericFilterStatus | read-write | mandatory | Indicates the status of this generic filter entry. Setting this object to the value 'invalid(2)' has the effect of invalidating the corresponding entry in the … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ATNetworkNumber | OCTET STRING (SIZE(2)) | ||
| HostNameOrIpAddr | OCTET STRING |