NIS-3500-2208PCE
409 objects
The MIB module is for Industrial Ethernet Switch and compatible to firmware kernel version 2.46 or higher.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.25972 | Nodecompany | |||
| 1.3.6.1.4.1.25972.0 | Nodeswitches | |||
| 1.3.6.1.4.1.25972.0.5 | NodemanagedPoeSwitch | |||
| 1.3.6.1.4.1.25972.0.5.20 | Nodenis-3500-2208pce | |||
| 1.3.6.1.4.1.25972.0.5.20.0 | Identitycontact | The MIB module is for Industrial Ethernet Switch and compatible to firmware kernel version 2.46 or higher. | ||
| 1.3.6.1.4.1.25972.0.5.20.1 | NodesystemInfo | |||
| 1.3.6.1.4.1.25972.0.5.20.1.1 | ScalarsystemName | read-only | current | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.4.1.25972.0.5.20.1.2 | ScalarsystemLocation | read-only | current | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.4.1.25972.0.5.20.1.3 | ScalarsystemContact | read-only | current | The contact information of system. |
| 1.3.6.1.4.1.25972.0.5.20.1.4 | ScalarsystemDescr | read-only | current | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.4.1.25972.0.5.20.1.5 | ScalarsystemFwVer | read-only | current | Firmware version of the device. |
| 1.3.6.1.4.1.25972.0.5.20.1.6 | ScalarsystemMacAddress | read-only | current | The MAC address of switch. |
| 1.3.6.1.4.1.25972.0.5.20.2 | NodebasicSetting | |||
| 1.3.6.1.4.1.25972.0.5.20.2.1 | NodeswitchSetting | |||
| 1.3.6.1.4.1.25972.0.5.20.2.1.1 | ScalarswitchSettingSystemName | read-write | current | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.4.1.25972.0.5.20.2.1.2 | ScalarswitchSettingSystemLocation | read-write | current | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.4.1.25972.0.5.20.2.1.3 | ScalarswitchSettingSystemContact | read-write | current | The contact information of system. |
| 1.3.6.1.4.1.25972.0.5.20.2.1.4 | ScalarswitchSettingLocationAlert | read-write | current | The location alert function. |
| 1.3.6.1.4.1.25972.0.5.20.2.2 | NodeadminPassword | |||
| 1.3.6.1.4.1.25972.0.5.20.2.2.1 | ScalaradminPasswordUserName | read-write | current | The name(ID) of security manager. |
| 1.3.6.1.4.1.25972.0.5.20.2.2.2 | ScalaradminPassword-Password | write-only | current | The password of security manager. This object can't be read. it's write-only. |
| 1.3.6.1.4.1.25972.0.5.20.2.3 | NodeipConfiguration | |||
| 1.3.6.1.4.1.25972.0.5.20.2.3.1 | TableipConfigurationTable | not-accessible | current | Table of descriptive information and configuration about IP of switche. |
| 1.3.6.1.4.1.25972.0.5.20.2.3.1.1 | RowipConfigurationEntry | not-accessible | current | An entry in the table, containing IP/DHCP-client information of the switch. |
| 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.1 | ColumnipConfigurationIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.2 | ColumnipConfigurationDHCPStatus | read-write | current | Parameter to enable or disable DHCP client function of the switch. When enabled, device will be a DHCP client and request the IP configuration from DHCP server… |
| 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.3 | ColumnipConfigurationAddress | read-write | current | The IP address of switch. |
| 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.4 | ColumnipConfigurationSubMask | read-write | current | The subnet mask of switch. |
| 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.5 | ColumnipConfigurationGateway | read-write | current | The gateway address of switch. |
| 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.6 | ColumnipConfigurationDNS1 | read-write | current | The DNS1 address of switch. |
| 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.7 | ColumnipConfigurationDNS2 | read-write | current | The DNS2 address of switch. |
| 1.3.6.1.4.1.25972.0.5.20.2.4 | Nodesntp | |||
| 1.3.6.1.4.1.25972.0.5.20.2.4.1 | ScalarsntpClientStatus | read-write | current | (1)Enable SNTP clinet. (2)Disable SNTP clinet. SNTP is simple network time protocol. Use this OID to Enable/Disable SNTP client. |
| 1.3.6.1.4.1.25972.0.5.20.2.4.2 | ScalarsntpDaylightSavingTime | read-write | current | (1)Enable Daylight Saving Time. (2)Disable Daylight Saving Time. Daylight Saving Time: Use this OID to Enable/Disable Daylight Saving Time. |
| 1.3.6.1.4.1.25972.0.5.20.2.4.3 | ScalarsntpUTCTimezone | read-write | current | UTC Timezone. |
| 1.3.6.1.4.1.25972.0.5.20.2.4.4 | ScalarsntpServerAddress | read-write | current | The address of a SNTP Server. |
| 1.3.6.1.4.1.25972.0.5.20.2.4.5 | ScalarsntpSwitchTimer | read-only | current | The switch timer. |
| 1.3.6.1.4.1.25972.0.5.20.2.4.6 | ScalarsntpDaylightSavingPeriodStart | read-write | current | The start-time of daylight saveing period, format: yyyymmdd hh:mm. |
| 1.3.6.1.4.1.25972.0.5.20.2.4.7 | ScalarsntpDaylightSavingPeriodEnd | read-write | current | The end-time of daylight saveing period, format: yyyymmdd hh:mm. |
| 1.3.6.1.4.1.25972.0.5.20.2.4.8 | ScalarsntpDaylightSavingOffset | read-write | current | Daylight Saving Offset(Usually is 60 mins). When Enable and current time at Daylight Saving Period, the current time of the switch will be offseted by Daylight… |
| 1.3.6.1.4.1.25972.0.5.20.2.5 | Nodelldp | |||
| 1.3.6.1.4.1.25972.0.5.20.2.5.1 | ScalarlldpStatus | read-write | current | LLDP Configuration. (1) Enable. (2) Disable. |
| 1.3.6.1.4.1.25972.0.5.20.2.5.2 | ScalarlldpInterval | read-write | current | LLDP Interval. |
| 1.3.6.1.4.1.25972.0.5.20.2.6 | NodeautoProvision | |||
| 1.3.6.1.4.1.25972.0.5.20.2.6.1 | ScalarautoProvisionConfigurationStatus | read-write | current | Auto Provision for Switch Configuration. (1) Enable. (2) Disable. |
| 1.3.6.1.4.1.25972.0.5.20.2.6.2 | ScalarautoProvisionConfigurationServerip | read-write | current | The IP address of TFTP server. |
| 1.3.6.1.4.1.25972.0.5.20.2.6.3 | ScalarautoProvisionConfigurationFilename | read-write | current | The filename of firmware. |
| 1.3.6.1.4.1.25972.0.5.20.2.6.4 | ScalarautoProvisionImageStatus | read-write | current | Auto Provision for firmware image. (1) Enable. (2) Disable. |
| 1.3.6.1.4.1.25972.0.5.20.2.6.5 | ScalarautoProvisionImageServerip | read-write | current | The IP address of TFTP server. |
| 1.3.6.1.4.1.25972.0.5.20.2.6.6 | ScalarautoProvisionImageFilename | read-write | current | The filename of firmware. |
| 1.3.6.1.4.1.25972.0.5.20.2.7 | NodebackupAndRestore | |||
| 1.3.6.1.4.1.25972.0.5.20.2.7.1 | ScalarbackupServerIP | read-write | current | The IP address of a TFTP server from which a firmware image can be uploaded. |
| 1.3.6.1.4.1.25972.0.5.20.2.7.2 | ScalarbackupAgentBoardFwFileName | read-write | current | |
| 1.3.6.1.4.1.25972.0.5.20.2.7.3 | ScalarbackupStatus | read-write | current | Setting this object to active(1) triger the TFTP upload action. Setting this object to notActive(2) has no effect. The system always returns the value notActiv… |
| 1.3.6.1.4.1.25972.0.5.20.2.7.4 | ScalarrestoreServerIP | read-write | current | The IP address of a TFTP server from which a firmware image can be downloaded. |
| 1.3.6.1.4.1.25972.0.5.20.2.7.5 | ScalarrestoreAgentBoardFwFileName | read-write | current | |
| 1.3.6.1.4.1.25972.0.5.20.2.7.6 | ScalarrestoreStatus | read-write | current | Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notAct… |
| 1.3.6.1.4.1.25972.0.5.20.2.8 | NodeupgradeFirmware | |||
| 1.3.6.1.4.1.25972.0.5.20.2.8.1 | ScalartftpDownloadServerIP | read-write | current | The IP address of a TFTP server from which a firmware image can be downloaded. |
| 1.3.6.1.4.1.25972.0.5.20.2.8.2 | ScalartftpDownloadAgentBoardFwFileName | read-write | current | |
| 1.3.6.1.4.1.25972.0.5.20.2.8.3 | ScalartftpDownloadStatus | read-write | current | Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notAct… |
| 1.3.6.1.4.1.25972.0.5.20.3 | NodedhcpServer | |||
| 1.3.6.1.4.1.25972.0.5.20.3.1 | TabledhcpServerCfgTable | not-accessible | current | Table of descriptive information and configuration about DHCP server of the switch. |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1 | RowdhcpServerCfgEntry | not-accessible | current | An entry in the table, containing DHCP server information of the switch. |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1.1 | ColumndhcpServerCfgIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1.2 | ColumndhcpServerCfgStatus | read-write | current | Parameter to enable or disable DHCP server function of the switch. When enabled, the device will be a DHCP server and provide the IP configurations for other D… |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1.3 | ColumndhcpServerCfgLowIPAddr | read-write | current | This object defines the low boundary of DHCP server IP pool. |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1.4 | ColumndhcpServerCfgHighIPAddr | read-write | current | This object defines the high boundary of DHCP server IP pool. |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1.5 | ColumndhcpServerCfgSubMask | read-write | current | The subnet mask of IP configuration for DHCP clients. |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1.6 | ColumndhcpServerCfgGateway | read-write | current | The gateway address of IP configuration for DHCP clients. |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1.7 | ColumndhcpServerCfgDNS | read-write | current | The DNS address of IP configuration for DHCP clients. |
| 1.3.6.1.4.1.25972.0.5.20.3.1.1.8 | ColumndhcpServerCfgLeaseTime | read-write | current | The lease time(in second) of DHCP clients. |
| 1.3.6.1.4.1.25972.0.5.20.3.2 | TabledhcpServerClientInfoTable | not-accessible | current | Table of descriptive information about current status of each DHCP client registered. |
| 1.3.6.1.4.1.25972.0.5.20.3.2.1 | RowdhcpServerClientInfoEntry | not-accessible | current | An entry in the table, containing DHCP clients information. |
| 1.3.6.1.4.1.25972.0.5.20.3.2.1.1 | ColumndhcpServerClientInfoIndex | read-only | current | Index of DHCP client. |
| 1.3.6.1.4.1.25972.0.5.20.3.2.1.2 | ColumndhcpServerClientInfoIPAddr | read-only | current | The IP address of client. |
| 1.3.6.1.4.1.25972.0.5.20.3.2.1.3 | ColumndhcpServerClientInfoID | read-only | current | The ID(MAC address) of client. |
| 1.3.6.1.4.1.25972.0.5.20.3.2.1.4 | ColumndhcpServerClientInfoType | read-only | current | The type of client. bootptab: Entry comes from bootptab file. dynamic: Entry is dynamiclly created w/defaults for dhcp offer. sniffed: Entry is learned by snoo… |
| 1.3.6.1.4.1.25972.0.5.20.3.2.1.5 | ColumndhcpServerClientInfoStatus | read-only | current | The status of client. Unassigned: none of the following. BOOTP: Entry has been assigned via plain bootp. DHCPOffer: Entry has a dhcp offer pending. DHCP: Entry… |
| 1.3.6.1.4.1.25972.0.5.20.3.2.1.6 | ColumndhcpServerClientInfoLease | read-only | current | The lease time of client(in second). |
| 1.3.6.1.4.1.25972.0.5.20.3.3 | TabledhcpServerIPBindingTable | not-accessible | current | Table of descriptive information and configuration about IP binding of DHCP server. |
| 1.3.6.1.4.1.25972.0.5.20.3.3.1 | RowdhcpServerIPBindingEntry | not-accessible | current | An entry in the table, containing IP binding information of DHCP server. |
| 1.3.6.1.4.1.25972.0.5.20.3.3.1.1 | ColumndhcpServerIPBindingPortNum | read-only | current | The port number. |
| 1.3.6.1.4.1.25972.0.5.20.3.3.1.2 | ColumndhcpServerIPBindingAddr | read-write | current | The IP binding address. |
| 1.3.6.1.4.1.25972.0.5.20.4 | NodeportSetting | |||
| 1.3.6.1.4.1.25972.0.5.20.4.1 | NodeportControl | |||
| 1.3.6.1.4.1.25972.0.5.20.4.1.1 | TableportCtrlTable | not-accessible | current | Table of status information and configuration about each switch ports(including expansion slot). |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1 | RowportCtrlEntry | not-accessible | current | An entry in the table, containing information about configuration in one switch port of the switch. |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.1 | ColumnportCtrlIndex | not-accessible | current | Index of port management table. |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.2 | ColumnportCtrlPortName | read-only | current | The name of port. |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.3 | ColumnportCtrlPortStatus | read-write | current | To disable (or enable) control of this port. |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.4 | ColumnportCtrlNegotiation | read-write | current | The mode of network negoticaion, (1)Automatic (2)Force |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.5 | ColumnportCtrlSpeed | read-write | current | Set the speed of the port. If portCtrlNegotiation is auto, this object can't be modified. |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.6 | ColumnportCtrlDuplex | read-write | current | Set full-duplex or half-duplex mode of the port. If portCtrlNegotiation is auto, this object can't be modified. |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.7 | ColumnportCtrlFlowControl | read-write | current | Set flow control. |
| 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.8 | ColumnportCtrlSecurity | read-write | current | Set port security. |
| 1.3.6.1.4.1.25972.0.5.20.4.2 | NoderateLimiting | |||
| 1.3.6.1.4.1.25972.0.5.20.4.2.1 | TablerateLimitingTable | not-accessible | current | Table of descriptive information and configuration about port rate limiting in this system. You can set up every port 3/4s bandwidth rate and packet limitation… |
| 1.3.6.1.4.1.25972.0.5.20.4.2.1.1 | RowrateLimitingEntry | not-accessible | current | An entry in the table, containing information about port rate limiting. |
| 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.1 | ColumnrateLimitingPortNum | read-only | current | Port number. |
| 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.2 | ColumnrateLimitingPortType | read-write | current | Limit Packet type: select the packet type that want to filter. The packet types have all type packet, broadcast/multicast/ unknown unicast packet, broadcast/mu… |
| 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.3 | ColumnrateLimitingIngressRate | read-write | current | Ingress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit. |
| 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.4 | ColumnrateLimitingEgressRate | read-write | current | Egress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit. |
| 1.3.6.1.4.1.25972.0.5.20.4.3 | NodeportTrunk | |||
| 1.3.6.1.4.1.25972.0.5.20.4.3.1 | NodeaggregatorSetting | |||
| 1.3.6.1.4.1.25972.0.5.20.4.3.1.1 | ScalarportTrunkSysPri | read-write | current | The system priority of trunking. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.1.2 | TableportTrunkAggregatorTable | not-accessible | current | Table of descriptive information and configuration about of each trunk group in this system. Link aggregation lets you group up to switch-port-num consecutive … |
| 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1 | RowportTrunkAggregatorEntry | not-accessible | current | An entry in the table, containing information about aggregator setting of the trunk. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.1 | ColumnportTrunkAggregatorIndex | read-only | current | Index of trunk aggregator table. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.2 | ColumnportTrunkAggregatorGroupName | read-only | current | The name of trunk group. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.3 | ColumnportTrunkAggregatorMemberPorts | read-write | current | The members of trunk group. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.4 | ColumnportTrunkAggregatorLACPStatus | read-write | current | The LACP function of trunking. (1) LACP is enabled for the group. (2) LACP is disabled for the group. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.5 | ColumnportTrunkAggregatorWorkPorts | read-write | current | The works ports of trunked group, the number of work ports should be equal to the count of members in static trunking(ie. LACP is disabled), and should not gre… |
| 1.3.6.1.4.1.25972.0.5.20.4.3.2 | NodeaggregatorStatus | |||
| 1.3.6.1.4.1.25972.0.5.20.4.3.2.1 | TableportTrunkAggregatorInfoTable | not-accessible | current | Table of descriptive information about trunk group in this system. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1 | RowportTrunkAggregatorInfoEntry | not-accessible | current | An entry in the table, containing information about the trunk group. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.1 | ColumnportTrunkAggregatorInfoIndex | read-only | current | Index of trunk information table. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.2 | ColumnportTrunkAggregatorInfoGroupName | read-only | current | The name of trunk group. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.3 | ColumnportTrunkAggregatorInfoDescription | read-only | current | The dscription of trunk group. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.3 | NodestateActivity | |||
| 1.3.6.1.4.1.25972.0.5.20.4.3.3.1 | TableportTrunkLACPStateActTable | not-accessible | current | Table of descriptive information and configuration about of each trunk group in this system. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1 | RowportTrunkLACPStateActEntry | not-accessible | current | An entry in the table, containing information about LACP state activity of the trunk. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.1 | ColumnportTrunkLACPStateActPortNum | read-only | current | Port number. |
| 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.2 | ColumnportTrunkLACPStateActStatus | read-write | current | The LACP state activity of the port. (1) Active. (2) Passive. (3) LACP doesn't be enabled. |
| 1.3.6.1.4.1.25972.0.5.20.5 | Noderedundancy | |||
| 1.3.6.1.4.1.25972.0.5.20.5.1 | NoderedundantRing | |||
| 1.3.6.1.4.1.25972.0.5.20.5.1.1 | ScalarredundantRingStatus | read-write | current | redundantRing function status. (1) redundantRing function is enabled. (2) redundantRing function is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.5.1.2 | ScalarredundantRingMasterStatus | read-write | current | Ring Master function status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus obje… |
| 1.3.6.1.4.1.25972.0.5.20.5.1.3 | ScalarredundantRingPort1 | read-write | current | Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus obj… |
| 1.3.6.1.4.1.25972.0.5.20.5.1.4 | ScalarredundantRingPort2 | read-write | current | Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus obj… |
| 1.3.6.1.4.1.25972.0.5.20.5.1.5 | ScalarredundantRingCoupleRingStatus | read-write | current | Couple Ring function status. (1) Couple Ring function is enabled. (2) Couple Ring function is disabled. This item can't be modified if redundantRingStatus obje… |
| 1.3.6.1.4.1.25972.0.5.20.5.1.6 | ScalarredundantRingCouplingPort | read-write | current | Coupling Port. |
| 1.3.6.1.4.1.25972.0.5.20.5.1.7 | ScalarredundantRingDualHomingStatus | read-write | current | Couple Ring function status. (1) Dual Homing function is enabled. (2) Dual Homing function is disabled. This item can't be modified if redundantRingStatus obje… |
| 1.3.6.1.4.1.25972.0.5.20.5.1.8 | ScalarredundantRingHomingPort | read-write | current | Homing Port. |
| 1.3.6.1.4.1.25972.0.5.20.5.1.9 | ScalarredundantRingMasterHStatus | read-only | current | Ring Master function hardware status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingSt… |
| 1.3.6.1.4.1.25972.0.5.20.5.3 | Noderstp | |||
| 1.3.6.1.4.1.25972.0.5.20.5.3.1 | ScalarrstpStatus | read-write | current | Enable/Disable rapid spanning tree protocol for system. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.2 | ScalarrstpPriority | read-write | current | A value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. Enter a number 0 through 61440… |
| 1.3.6.1.4.1.25972.0.5.20.5.3.3 | ScalarrstpMaxAge | read-write | current | The number of seconds a bridge waits without receiving Spanning-Tree Protocol configuration messages before attempting a reconfiguration. Enter a number 6 thro… |
| 1.3.6.1.4.1.25972.0.5.20.5.3.4 | ScalarrstpHelloTime | read-write | current | The number of seconds between the transmission of Spanning-Tree Protocol configuration messages. Enter a number 1 through 10 Note: 2*(Forward Delay Time-1) sho… |
| 1.3.6.1.4.1.25972.0.5.20.5.3.5 | ScalarrstpForwardDelayTime | read-write | current | The number of seconds a port waits before changing from its Spanning-Tree Protocol learning and listening states to the forwarding state. Enter a number 4 thro… |
| 1.3.6.1.4.1.25972.0.5.20.5.3.6 | TablerstpPerPortCfgTable | not-accessible | current | Table of descriptive information and configuration about rapid spanning tree (Per port). |
| 1.3.6.1.4.1.25972.0.5.20.5.3.6.1 | RowrstpPerPortCfgEntry | not-accessible | current | An entry in the table, containing configuration about RSTP (Per port). |
| 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.1 | ColumnrstpPerPortCfgPortNum | read-only | current | Port number. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.2 | ColumnrstpPerPortCfgPathCost | read-write | current | The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.3 | ColumnrstpPerPortCfgPriority | read-write | current | Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.4 | ColumnrstpPerPortCfgAdminP2P | read-write | current | Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bri… |
| 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.5 | ColumnrstpPerPortCfgAdminEdge | read-write | current | Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the netw… |
| 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.6 | ColumnrstpPerPortCfgAdminNonStp | read-write | current | If true, this port will not participate in RSTP. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7 | TablerstpRootBridgeInformationTable | not-accessible | current | Table of descriptive information about root bridge of rapid spanning tree in this system. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1 | RowrstpRootBridgeInformationEntry | not-accessible | current | An entry in the table, containing information about root bridge information of the RSTP. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.1 | ColumnrstpRootBridgeInformationIndex | not-accessible | current | Index of root bridge information table. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.2 | ColumnrstpRootBridgeInformationBridgeID | read-only | current | Bridge ID. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.3 | ColumnrstpRootBridgeInformationRootPriority | read-only | current | Root Priority. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.4 | ColumnrstpRootBridgeInformationRootPort | read-only | current | Root Port. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.5 | ColumnrstpRootBridgeInformationRootPathCost | read-only | current | Root Path Cost. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.6 | ColumnrstpRootBridgeInformationMaxAge | read-only | current | Max Age. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.7 | ColumnrstpRootBridgeInformationHelloTime | read-only | current | Hello Time. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.8 | ColumnrstpRootBridgeInformationForwardDelay | read-only | current | Forward Delay Time. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8 | TablerstpPerPortInfoTable | not-accessible | current | Table of descriptive information and configuration about rapid spanning tree (Per port). |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1 | RowrstpPerPortInfoEntry | not-accessible | current | An entry in the table, containing inforamtion about RSTP (Per port). |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.1 | ColumnrstpPerPortInfoPortNum | read-only | current | Port number. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.2 | ColumnrstpPerPortInfoPathCost | read-only | current | The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.3 | ColumnrstpPerPortInfoPriority | read-only | current | Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16. |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.4 | ColumnrstpPerPortInfoAdminP2P | read-only | current | Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bri… |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.5 | ColumnrstpPerPortInfoAdminEdge | read-only | current | Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the netw… |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.6 | ColumnrstpPerPortInfoStpNeighbor | read-only | current | |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.7 | ColumnrstpPerPortInfoState | read-only | current | |
| 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.8 | ColumnrstpPerPortInfoRole | read-only | current | |
| 1.3.6.1.4.1.25972.0.5.20.6 | Nodevlan | |||
| 1.3.6.1.4.1.25972.0.5.20.6.1 | ScalarvlanOperationMode | read-write | current | The operation mode of vlan. (1)IEEE802.1Q VLAN, (2)Portbased VLAN, (3)VLAN is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.6.2 | ScalarvlanGVRP | read-write | current | Enable GVRP Protocol. The item has no meaning, if the operation mode of vlan isn't IEEE802.1Q. |
| 1.3.6.1.4.1.25972.0.5.20.6.3 | TablevlanIEEE8021QTable | not-accessible | current | Table of descriptive information and configuration about IEEE802.1Q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is f… |
| 1.3.6.1.4.1.25972.0.5.20.6.3.1 | RowvlanIEEE8021QEntry | not-accessible | current | An entry in the table, containing information and configuration of IEEE802.1Q vlan. |
| 1.3.6.1.4.1.25972.0.5.20.6.3.1.1 | ColumnvlanIEEE8021QIndex | read-only | current | Index of IEEE802.1Q table. |
| 1.3.6.1.4.1.25972.0.5.20.6.3.1.2 | ColumnvlanIEEE8021QPortName | read-only | current | The name of port. |
| 1.3.6.1.4.1.25972.0.5.20.6.3.1.3 | ColumnvlanIEEE8021QLinkType | read-write | current | The type of port: (1)Access Link (2)Trunk Link (3)Hybrid Link |
| 1.3.6.1.4.1.25972.0.5.20.6.3.1.4 | ColumnvlanIEEE8021QUntaggedVid | read-write | current | The untagged vid of port. This item can't be modified, if link type is trunklink. |
| 1.3.6.1.4.1.25972.0.5.20.6.3.1.5 | ColumnvlanIEEE8021QTaggedVids | read-write | current | The tagged vids of port. It's a descriptive statement of a list of tagged vids. Note: Every tagged vid is separated by a comma and no space-key be allowed. Thi… |
| 1.3.6.1.4.1.25972.0.5.20.6.4 | TablevlanIEEE8021QGroupTable | not-accessible | current | Table of descriptive information and configuration of each ieee802.1q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is… |
| 1.3.6.1.4.1.25972.0.5.20.6.4.1 | RowvlanIEEE8021QGroupEntry | not-accessible | current | An entry in the table, containing information about group name of the IEEE802.1Q vlan. |
| 1.3.6.1.4.1.25972.0.5.20.6.4.1.1 | ColumnvlanIEEE8021QGroupVid | read-only | current | Vlan ID. |
| 1.3.6.1.4.1.25972.0.5.20.6.4.1.2 | ColumnvlanIEEE8021QGroupName | read-write | current | The group name of vlan. |
| 1.3.6.1.4.1.25972.0.5.20.6.4.1.3 | ColumnvlanIEEE8021QGroupStatus | read-write | current | The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. |
| 1.3.6.1.4.1.25972.0.5.20.6.5 | TablevlanPortBasedTable | not-accessible | current | Table of descriptive information and configuration about of each port based vlan group in this system. Traffic is forwarded to the member ports of the same vla… |
| 1.3.6.1.4.1.25972.0.5.20.6.5.1 | RowvlanPortBasedEntry | not-accessible | current | An entry in the table, containing information about port based vlan. |
| 1.3.6.1.4.1.25972.0.5.20.6.5.1.1 | ColumnvlanPortBasedIndex | read-only | current | Index of port-based vlan table. |
| 1.3.6.1.4.1.25972.0.5.20.6.5.1.2 | ColumnvlanPortBasedGroupName | read-create | current | The group name of vlan. |
| 1.3.6.1.4.1.25972.0.5.20.6.5.1.3 | ColumnvlanPortBasedVid | read-create | current | The vid of vlan. Vid should be the value between 1 to 4094. |
| 1.3.6.1.4.1.25972.0.5.20.6.5.1.4 | ColumnvlanPortBasedMembers | read-create | current | The member mask of vlan. Note: If there were a trunking group, all of trunking members should be in the same vlan group. If some members of trunking group does… |
| 1.3.6.1.4.1.25972.0.5.20.6.5.1.5 | ColumnvlanPortBasedStatus | read-create | current | The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. |
| 1.3.6.1.4.1.25972.0.5.20.7 | Nodesnmp | |||
| 1.3.6.1.4.1.25972.0.5.20.7.1 | ScalarsnmpAgentMode | read-write | current | The Agent mode of snmp agent. (1) SNMPV1/V2C Only. (2) SNMPV3. (3) SNMPV1/V2C/V3 |
| 1.3.6.1.4.1.25972.0.5.20.7.2 | ScalarsnmpSystemName | read-write | current | The system name. |
| 1.3.6.1.4.1.25972.0.5.20.7.3 | ScalarsnmpSystemLocation | read-write | current | The system location. |
| 1.3.6.1.4.1.25972.0.5.20.7.4 | ScalarsnmpSystemContact | read-write | current | The contact information of system. |
| 1.3.6.1.4.1.25972.0.5.20.7.5 | TablesnmpCommunityStringTable | not-accessible | current | Table of descriptive and information about community string of SNMP agent. |
| 1.3.6.1.4.1.25972.0.5.20.7.5.1 | RowsnmpCommunityStringEntry | not-accessible | current | An entry in the table, containing inforamtion about community string of SNMP agent. |
| 1.3.6.1.4.1.25972.0.5.20.7.5.1.1 | ColumnsnmpCommunityStringIndex | not-accessible | current | Index of community string. |
| 1.3.6.1.4.1.25972.0.5.20.7.5.1.2 | ColumnsnmpCommunityStringName | read-write | current | The community string of SNMP agent. |
| 1.3.6.1.4.1.25972.0.5.20.7.5.1.3 | ColumnsnmpCommunityStringAttribute | read-write | current | The attribute of community string. |
| 1.3.6.1.4.1.25972.0.5.20.7.5.1.4 | ColumnsnmpCommunityStringStatus | read-create | current | The status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent. |
| 1.3.6.1.4.1.25972.0.5.20.7.6 | TablesnmpTrapServerTable | not-accessible | current | Table of descriptive and information about trap server of SNMP agent. |
| 1.3.6.1.4.1.25972.0.5.20.7.6.1 | RowsnmpTrapServerEntry | not-accessible | current | An entry in the table, containing inforamtion about trap server of SNMP agent. |
| 1.3.6.1.4.1.25972.0.5.20.7.6.1.1 | ColumnsnmpTrapServerIndex | not-accessible | current | Index of trap server. |
| 1.3.6.1.4.1.25972.0.5.20.7.6.1.2 | ColumnsnmpTrapServerIPAddr | read-write | current | Trap Server IP Address. |
| 1.3.6.1.4.1.25972.0.5.20.7.6.1.3 | ColumnsnmpTrapServerTrapComm | read-write | current | The community string of trap server. |
| 1.3.6.1.4.1.25972.0.5.20.7.6.1.4 | ColumnsnmpTrapServerTrapVer | read-write | current | The trap version. |
| 1.3.6.1.4.1.25972.0.5.20.7.6.1.5 | ColumnsnmpTrapServerStatus | read-create | current | The status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent. |
| 1.3.6.1.4.1.25972.0.5.20.8 | NodetrafficPrioritization | |||
| 1.3.6.1.4.1.25972.0.5.20.8.1 | ScalarqosPolicy | read-write | current | (1)Using the 8, 4, 2, 1 weight fair queue scheme. (2)Use the strict priority scheme. Using the 8, 4, 2, 1 weight fair queue scheme: the switch will follow 8:4:… |
| 1.3.6.1.4.1.25972.0.5.20.8.2 | ScalarqosPriorityType | read-write | current | (1)Port Base (2)COS only (3)TOS only (4)COS first (5)TOS first (6)Disabled Port-base: the port priority will follow the default port priority that you have ass… |
| 1.3.6.1.4.1.25972.0.5.20.8.3 | TableqosPortBasedPriorityTable | not-accessible | current | Table of descriptive information and configuration about PortBased QOS. |
| 1.3.6.1.4.1.25972.0.5.20.8.3.1 | RowqosPortBasedPriorityEntry | not-accessible | current | An entry in the table, containing inforamtion about PortBased QOS. |
| 1.3.6.1.4.1.25972.0.5.20.8.3.1.1 | ColumnqosPortBasedPriorityPortNum | read-only | current | Port number. |
| 1.3.6.1.4.1.25972.0.5.20.8.3.1.2 | ColumnqosPortBasedPriority | read-write | current | The port priority will follow the default port priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. |
| 1.3.6.1.4.1.25972.0.5.20.8.4 | TableqosCOSTable | not-accessible | current | Table of descriptive information and configuration about PortBased QOS. |
| 1.3.6.1.4.1.25972.0.5.20.8.4.1 | RowqosCOSEntry | not-accessible | current | An entry in the table, containing inforamtion about COS QOS. |
| 1.3.6.1.4.1.25972.0.5.20.8.4.1.1 | ColumnqosCOSPriority | read-only | current | COS priority. |
| 1.3.6.1.4.1.25972.0.5.20.8.4.1.2 | ColumnqosCOS | read-write | current | The port priority will follow the COS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. |
| 1.3.6.1.4.1.25972.0.5.20.8.5 | TableqosCOSPortDefaultTable | not-accessible | current | Table of descriptive information and configuration about PortBased QOS. |
| 1.3.6.1.4.1.25972.0.5.20.8.5.1 | RowqosCOSPortDefaultEntry | not-accessible | current | An entry in the table, containing inforamtion about COS QOS. |
| 1.3.6.1.4.1.25972.0.5.20.8.5.1.1 | ColumnqosCOSPort | read-only | current | COS Default Panel Port. |
| 1.3.6.1.4.1.25972.0.5.20.8.5.1.2 | ColumnqosCOSPortDefault | read-write | current | COS Default Panel Port Priority. |
| 1.3.6.1.4.1.25972.0.5.20.8.6 | TableqosTOSTable | not-accessible | current | Table of descriptive information and configuration about PortBased QOS. |
| 1.3.6.1.4.1.25972.0.5.20.8.6.1 | RowqosTOSEntry | not-accessible | current | An entry in the table, containing inforamtion about TOS QOS. |
| 1.3.6.1.4.1.25972.0.5.20.8.6.1.1 | ColumnqosTOSPriority | read-only | current | TOS priority. |
| 1.3.6.1.4.1.25972.0.5.20.8.6.1.2 | ColumnqosTOS | read-write | current | The port priority will follow the TOS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. |
| 1.3.6.1.4.1.25972.0.5.20.9 | Nodemulticast | |||
| 1.3.6.1.4.1.25972.0.5.20.9.1 | Nodeigmp | |||
| 1.3.6.1.4.1.25972.0.5.20.9.1.1 | ScalarigmpStatus | read-write | current | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. The Internet … |
| 1.3.6.1.4.1.25972.0.5.20.9.1.2 | ScalarigmpQuery | read-write | current | (1)Detect querier automatically. (2)Force to be a querier. (3)Be a silence snooper. The mode of querier. |
| 1.3.6.1.4.1.25972.0.5.20.9.1.3 | TableigmpEntriesTable | not-accessible | current | Table of descriptive information about IGMP entries. |
| 1.3.6.1.4.1.25972.0.5.20.9.1.3.1 | RowigmpEntriesEntry | not-accessible | current | An entry in the table, containing inforamtion about IGMP. |
| 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.1 | ColumnigmpEntriesEntryIndex | read-only | current | Index of IGMP table. |
| 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.2 | ColumnigmpEntriesEntryIPAddr | read-only | current | The IP address of an IGMP entry. |
| 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.3 | ColumnigmpEntriesEntryVID | read-only | current | The VLAN ID of an IGMP entry. |
| 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.4 | ColumnigmpEntriesEntryMembers | read-only | current | The member ports mask of IGMP entry. |
| 1.3.6.1.4.1.25972.0.5.20.9.3 | Nodemulticastfiltering | |||
| 1.3.6.1.4.1.25972.0.5.20.9.3.1 | TablemulticastfilteringEntriesTable | not-accessible | current | Table of descriptive information about multicast filtering entries. |
| 1.3.6.1.4.1.25972.0.5.20.9.3.1.1 | RowmulticastfilteringEntriesEntry | not-accessible | current | An entry in the table, containing inforamtion about multicast filtering entries. |
| 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.1 | ColumnmulticastFilteringIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. |
| 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.2 | ColumnmulticastFilteringAddr | read-write | current | Group IP Address. |
| 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.3 | ColumnmulticastFilteringMemberports | read-create | current | The member mask of group. |
| 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.4 | ColumnmulticastFilteringStatus | read-create | current | The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. |
| 1.3.6.1.4.1.25972.0.5.20.10 | Nodesecurity | |||
| 1.3.6.1.4.1.25972.0.5.20.11 | Nodewarning | |||
| 1.3.6.1.4.1.25972.0.5.20.11.1 | NodefaultAlarm | |||
| 1.3.6.1.4.1.25972.0.5.20.11.1.1 | ScalarfaultAlarmPwr1 | read-write | current | State of Power1 failure alarm. |
| 1.3.6.1.4.1.25972.0.5.20.11.1.2 | ScalarfaultAlarmPwr2 | read-write | current | State of Power1 failure alarm. |
| 1.3.6.1.4.1.25972.0.5.20.11.1.3 | TablefaultAlarmPortCfgTable | not-accessible | current | Table of descriptive information and configuration about fault alarm per port configuration. |
| 1.3.6.1.4.1.25972.0.5.20.11.1.3.1 | RowfaultAlarmPortCfgEntry | not-accessible | current | An entry in the table, containing inforamtion about falut alarm per port configuration. |
| 1.3.6.1.4.1.25972.0.5.20.11.1.3.1.1 | ColumnfaultAlarmPortCfgNum | read-only | current | Index of port. |
| 1.3.6.1.4.1.25972.0.5.20.11.1.3.1.2 | ColumnfaultAlarmPortLinkStatus | read-write | current | State of Port Link Down/Broken failure alarm. |
| 1.3.6.1.4.1.25972.0.5.20.11.2 | NodesysLogConfiguration | |||
| 1.3.6.1.4.1.25972.0.5.20.11.2.1 | ScalarsyslogStatus | read-write | current | Parameter to specify the log should be sent to syslog server, or the log should be kept in switch. When disabled, the switch won't send out or record any log. |
| 1.3.6.1.4.1.25972.0.5.20.11.2.2 | ScalareventServerAddr | read-write | current | The IP address of syslog server. It can't be modified when syslogStatus is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.11.3 | NodesmtpConfiguration | |||
| 1.3.6.1.4.1.25972.0.5.20.11.3.1 | ScalareventEmailAlertStatus | read-write | current | Parameter to enable the Email alert feature, When enabled, the switch will send the mail to the address presented in emailAlertRcptTable. |
| 1.3.6.1.4.1.25972.0.5.20.11.3.2 | ScalareventEmailAlertAddr | read-write | current | The IP address of SMTP server. It can't be modified when eventEmailAlertStatus is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.11.3.3 | ScalareventEmailAlertAuthentication | read-write | current | Parameter to enable the authentication feature SMTP server. It can't be modified when eventEmailAlertStatus is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.11.3.4 | ScalareventEmailAlertAccount | read-write | current | The Email account for SMTP server. It can't be modified when eventEmailAlertAuthentication is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.11.3.5 | ScalareventEmailAlertPassword | write-only | current | The password of Email account. It can't be modified when eventEmailAlertAuthentication is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.11.3.6 | TableemailAlertRcptTable | not-accessible | current | Table of descriptive information of recipient Email address list. |
| 1.3.6.1.4.1.25972.0.5.20.11.3.6.1 | RowemailAlertRcptEntry | not-accessible | current | An entry in the table, containing recipient Email addresses. |
| 1.3.6.1.4.1.25972.0.5.20.11.3.6.1.1 | ColumneventEmailAlertRcptIndex | read-only | current | Index of recipient Email address. |
| 1.3.6.1.4.1.25972.0.5.20.11.3.6.1.2 | ColumneventEmailAlertRcptEmailAddr | read-write | current | The recipient Email address. |
| 1.3.6.1.4.1.25972.0.5.20.11.4 | NodeeventSelection | |||
| 1.3.6.1.4.1.25972.0.5.20.11.4.1 | TablesystemEventsTable | not-accessible | current | Table of descriptive information about system events. |
| 1.3.6.1.4.1.25972.0.5.20.11.4.1.1 | RowsystemEventsEntry | read-only | current | An entry in the table, containing type of system events. |
| 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.1 | ColumneventSystemEventsIndex | not-accessible | current | Index of events. |
| 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.2 | ColumneventDeviceRestartEvent | read-write | current | Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. … |
| 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.3 | ColumneventPowerStatusEvent | read-write | current | Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. … |
| 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.4 | ColumneventAuthenticationFailureEvent | read-write | current | Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. … |
| 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.5 | ColumneventRingTopologyChangeEvent | read-write | current | Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. … |
| 1.3.6.1.4.1.25972.0.5.20.11.4.2 | TableportEventsTable | not-accessible | current | Table of descriptive information about port events. |
| 1.3.6.1.4.1.25972.0.5.20.11.4.2.1 | RowportEventsEntry | not-accessible | current | An entry in the table, containing type of port events. |
| 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.1 | ColumneventPortNumber | read-only | current | Port number for port event table. |
| 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.2 | ColumneventPortEventLog | read-write | current | Parameter to indicate the which event should be logged. The value can't be modified, if syslogStatus is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.3 | ColumneventPortEventSMTP | read-write | current | Parameter to indicate the which event should be an Email alert. The value can't be modified, if eventEmailAlertStatus is disabled. |
| 1.3.6.1.4.1.25972.0.5.20.12 | NodemonitorAndDiag | |||
| 1.3.6.1.4.1.25972.0.5.20.12.1 | NodemacAddressTable | |||
| 1.3.6.1.4.1.25972.0.5.20.12.1.1 | ScalaragingTimeSetting | read-write | current | The MAC address table flush time. |
| 1.3.6.1.4.1.25972.0.5.20.12.1.2 | ScalarflushMACStatus | read-write | current | (1)Enable Flush MAC address table when ports link down. (2)Disable Flush MAC address table when ports link down. |
| 1.3.6.1.4.1.25972.0.5.20.12.1.3 | TablemacAddrTable | not-accessible | current | Table of descriptive information about MAC filter configuration. |
| 1.3.6.1.4.1.25972.0.5.20.12.1.3.1 | RowmacAddrEntry | not-accessible | current | An entry in the table, containing inforamtion about all MAC configuration. |
| 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.1 | ColumnmacAddressAddr | read-only | current | MAC address of the entry. |
| 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.2 | ColumnmacAddressPortName | read-only | current | The port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new en… |
| 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.3 | ColumnmacAddressType | read-only | current | The type of this entry. |
| 1.3.6.1.4.1.25972.0.5.20.12.1.4 | ScalarportSecurityClearMACTable | read-write | current | Set to active for cleaning all the MAC entries in MAC table. |
| 1.3.6.1.4.1.25972.0.5.20.12.2 | NodeportStatistic | |||
| 1.3.6.1.4.1.25972.0.5.20.12.2.1 | TableswitchPortStatTable | not-accessible | current | Table of descriptive and statistics information about each switch ports(including expansion slot). |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1 | RowswitchPortStatEntry | not-accessible | current | An entry in the table, containing information about statistics in one switch port of the switch. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.1 | ColumnswPortStatIndex | not-accessible | current | Index of port statistic table. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.2 | ColumnswPortStatType | read-only | current | Indicates the port type. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.3 | ColumnswPortStatLink | read-only | current | Indicates the link state. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.4 | ColumnswPortStatState | read-only | current | Indicates the port state |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.5 | ColumnswPortStatTXGoodPkt | read-only | current | The count of good packets of TX. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.6 | ColumnswPortStatTXBadPkt | read-only | current | The count of bad packets of TX. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.7 | ColumnswPortStatRXGoodPkt | read-only | current | The count of good packets of RX. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.8 | ColumnswPortStatRXBadPkt | read-only | current | The count of bad packets of RX. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.9 | ColumnswPortStatTXAbortPkt | read-only | current | The count of abort packets of TX. |
| 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.10 | ColumnswPortStatPacketCollision | read-only | current | The count of collision. |
| 1.3.6.1.4.1.25972.0.5.20.12.3 | Nodeportmirroring | |||
| 1.3.6.1.4.1.25972.0.5.20.12.3.1 | ScalarswPortMirrorDestinationPortTX | read-write | current | The TX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray. |
| 1.3.6.1.4.1.25972.0.5.20.12.3.2 | ScalarswPortMirrorDestinationPortRX | read-write | current | The RX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray. |
| 1.3.6.1.4.1.25972.0.5.20.12.3.3 | TableswitchPortMirrorSourceTable | not-accessible | current | Table of descriptive information and configuration of port mirror in this system. The Port Sniffer is a method for monitor traffic in switched networks. Use th… |
| 1.3.6.1.4.1.25972.0.5.20.12.3.3.1 | RowswitchPortMirrorSourceEntry | not-accessible | current | An entry in the table, containing information about port mirror. |
| 1.3.6.1.4.1.25972.0.5.20.12.3.3.1.1 | ColumnswPortMirrorPortNum | read-only | current | Port number. |
| 1.3.6.1.4.1.25972.0.5.20.12.3.3.1.2 | ColumnswPortMirrorSourcePort | read-write | current | The mode of source port (monitor port). (1) TX only. (2) RX only. (3) RX and TX. (4) Source port is disabled. The ports you want to monitor. All source port tr… |
| 1.3.6.1.4.1.25972.0.5.20.12.4 | NodeeventLog | |||
| 1.3.6.1.4.1.25972.0.5.20.12.4.1 | TableeventLogTable | not-accessible | current | Table of descriptive information about logs. |
| 1.3.6.1.4.1.25972.0.5.20.12.4.1.1 | RoweventLogEntry | not-accessible | current | An entry in the table, containing list of logs. |
| 1.3.6.1.4.1.25972.0.5.20.12.4.1.1.1 | ColumneventLogIndex | read-only | current | Index of log. |
| 1.3.6.1.4.1.25972.0.5.20.12.4.1.1.2 | ColumneventLogDescription | read-only | current | The description of log. |
| 1.3.6.1.4.1.25972.0.5.20.13 | NodesaveConfiguration | |||
| 1.3.6.1.4.1.25972.0.5.20.13.1 | ScalarsaveCfgMgtAction | read-write | current | Setting this object to active(1) triger saving current configuration. Setting this object to notActive(2) has no effect. The system always returns the value no… |
| 1.3.6.1.4.1.25972.0.5.20.14 | NodefactoryDefault | |||
| 1.3.6.1.4.1.25972.0.5.20.14.1 | ScalarfactoryDefaultAction | read-write | current | Setting this object to keep-ip-and-username-password(1), keep-ip(2), keep-username-password(3) , and keep-nothing(4), triger loading facotory default configura… |
| 1.3.6.1.4.1.25972.0.5.20.15 | NodesystemReboot | |||
| 1.3.6.1.4.1.25972.0.5.20.15.1 | ScalarsystemRebootAction | read-write | current | Setting this object to active(1) triger the system restart. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2)… |
| 1.3.6.1.4.1.25972.0.5.20.24 | Nodemisc | |||
| 1.3.6.1.4.1.25972.0.5.20.24.1 | NodespecificTrap | |||
| 1.3.6.1.4.1.25972.0.5.20.24.1.1 | ScalartrapPowerStatus | read-only | current | Indicates the switch power status |
| 1.3.6.1.4.1.25972.0.5.20.24.1.2 | ScalartrapTopologyChange | read-only | current | redundantRing topology change counter. |
| 1.3.6.1.4.1.25972.0.5.20.24.2 | TableswitchCurrentPortNameListTable | not-accessible | current | Table of descriptive and status information about the logical ports in this system. |
| 1.3.6.1.4.1.25972.0.5.20.24.2.1 | RowswitchCurrentPortNameListEntry | not-accessible | current | An entry in the table, containing information about logical port name in this system. |
| 1.3.6.1.4.1.25972.0.5.20.24.2.1.1 | ColumnswCurrentPortNameListIndex | not-accessible | current | Index of logical port. |
| 1.3.6.1.4.1.25972.0.5.20.24.2.1.2 | ColumnswCurrentPortNameListPortName | read-only | current | The name of logical port. |
| 1.3.6.1.4.1.25972.0.5.20.24.2.1.3 | ColumnswCurrentPortNameListPortNumber | read-only | current | The port number(s) that port name belong to. If the logical port stood for a trunk group, this object shows the members of trunk group. |
| 1.3.6.1.4.1.25972.0.5.20.25 | NodepowerOverEthernet | |||
| 1.3.6.1.4.1.25972.0.5.20.25.1 | NodepoeSystemSetting | |||
| 1.3.6.1.4.1.25972.0.5.20.25.1.1 | ScalarpoeMaximumPowerAvailable | read-write | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.1.2 | ScalarpoeActualPowerConsumption | read-only | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.1.3 | ScalarpoePortKnockoffDisabled | read-write | current | Port Knockoff Disabled |
| 1.3.6.1.4.1.25972.0.5.20.25.1.4 | ScalarpoeACDisconnect | read-write | current | AC Disconnect |
| 1.3.6.1.4.1.25972.0.5.20.25.1.5 | ScalarpoeCapacitiveDetection | read-write | current | Capacitive Detection |
| 1.3.6.1.4.1.25972.0.5.20.25.2 | NodepoePortStatus | |||
| 1.3.6.1.4.1.25972.0.5.20.25.2.1 | TablepoePortStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.2.1.1 | RowpoePortStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.1 | ColumnpoePortStatusIndex | read-only | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.2 | ColumnpoePortStatusLink | read-only | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.3 | ColumnpoePortStatusState | read-only | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.4 | ColumnpoePortStatusCurrent | read-only | current | Current(mA) |
| 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.5 | ColumnpoePortStatusVoltage | read-only | current | Voltage(V) |
| 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.6 | ColumnpoePortStatusPower | read-only | current | Power(mW) |
| 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.7 | ColumnpoePortStatusDeterminedClass | read-only | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.3 | NodepoePortControl | |||
| 1.3.6.1.4.1.25972.0.5.20.25.3.1 | TablepoePortControlTable | not-accessible | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.3.1.1 | RowpoePortControlEntry | not-accessible | current | |
| 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.1 | ColumnpoePortControlIndex | read-only | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.2 | ColumnpoePortControlState | read-write | current | State |
| 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.3 | ColumnpoePortControlPowerLimitFromClassification | read-write | current | Power Limit From Classification |
| 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.4 | ColumnpoePortControlLegacy | read-write | current | Legacy |
| 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.5 | ColumnpoePortControlPriority | read-write | current | Priority |
| 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.6 | ColumnpoePortControlPowerLimit | read-write | current | Power Limit (<15400)mW |
| 1.3.6.1.5.1 | NodeipSecurityMgt | |||
| 1.3.6.1.5.1.1 | ScalaripSecurityStatus | read-write | current | IP Security function status. (1) IP Security function is enabled. (2) IP Security function is disabled. |
| 1.3.6.1.5.1.2 | ScalaripSecurityHTTPServerStatus | read-write | current | IP Security function status. (1) IP Security of HTTP server function is enabled. (2) IP Security of HTTP server function is disabled. |
| 1.3.6.1.5.1.3 | ScalaripSecurityTelnetServerStatus | read-write | current | IP Security function status. (1) IP Security of telnet server function is enabled. (2) IP Security of telnet server function is disabled. |
| 1.3.6.1.5.1.4 | ScalaripSecuritySNMPServerStatus | read-write | current | IP Security function status. (1) IP Security of SNMP server function is enabled. (2) IP Security of SNMP server function is disabled. |
| 1.3.6.1.5.1.5 | ScalaripSecuritySecurityIP1 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.6 | ScalaripSecuritySecurityIP2 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.7 | ScalaripSecuritySecurityIP3 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.8 | ScalaripSecuritySecurityIP4 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.9 | ScalaripSecuritySecurityIP5 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.10 | ScalaripSecuritySecurityIP6 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.11 | ScalaripSecuritySecurityIP7 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.12 | ScalaripSecuritySecurityIP8 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.13 | ScalaripSecuritySecurityIP9 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.1.14 | ScalaripSecuritySecurityIP10 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.5.2 | NodeportSecurityMgt | |||
| 1.3.6.1.5.2.1 | TableportSecurityTable | not-accessible | current | Table of descriptive information about static MAC per port configuration. When you add a static MAC address, it remains in the switch's address table, regardle… |
| 1.3.6.1.5.2.1.1 | RowportSecurityEntry | not-accessible | current | An entry in the table, containing inforamtion about static MAC per port configuration. |
| 1.3.6.1.5.2.1.1.1 | ColumnportSecurityIndex | not-accessible | current | Index of MAC. |
| 1.3.6.1.5.2.1.1.2 | ColumnportSecurityPortName | read-write | current | The port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new en… |
| 1.3.6.1.5.2.1.1.3 | ColumnportSecurityAddr | read-write | current | MAC address of the entry. |
| 1.3.6.1.5.2.1.1.4 | ColumnportSecurityStatus | read-create | current | The status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent. |
| 1.3.6.1.5.3 | NodemacBlacklist | |||
| 1.3.6.1.5.3.1 | TablemacBlacklistTable | not-accessible | current | Table of descriptive information about MAC filter configuration. MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on… |
| 1.3.6.1.5.3.1.1 | RowmacBlacklistEntry | not-accessible | current | An entry in the table, containing inforamtion about MAC filter configuration. |
| 1.3.6.1.5.3.1.1.1 | ColumnmacBlacklistIndex | not-accessible | current | Index of MAC. |
| 1.3.6.1.5.3.1.1.2 | ColumnmacBlacklistAddr | read-write | current | MAC address of the entry. |
| 1.3.6.1.5.3.1.1.3 | ColumnmacBlacklistStatus | read-create | current | The status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent. |
| 1.3.6.1.5.4 | Nodeieee8021x | |||
| 1.3.6.1.5.4.1 | NoderadiusServerSetting | |||
| 1.3.6.1.5.4.1.1 | Scalarradius8021xProtocolStatus | read-write | current | IEEE802.1x protocol function status. (1) IEEE802.1x protocol function is enabled. (2) IEEE802.1x protocol function is disabled. 802.1x makes use of the physica… |
| 1.3.6.1.5.4.1.2 | ScalarradiusServerIP | read-write | current | Radius Server IP Address: the ip address of the authentication server. |
| 1.3.6.1.5.4.1.3 | ScalarradiusServerPort | read-write | current | Server Port: The UDP port number used by the authentication server to authenticate. |
| 1.3.6.1.5.4.1.4 | ScalarradiusAccountingPort | read-write | current | Accounting Port: The UDP port number used by the authentication server to retrieve accounting information. |
| 1.3.6.1.5.4.1.5 | ScalarradiusSharedKey | read-write | current | Shared Key: A key shared between this switch and authentication server. |
| 1.3.6.1.5.4.1.6 | ScalarradiusNASIdentifier | read-write | current | NAS Identifier: A string used to identify this switch. |
| 1.3.6.1.5.4.1.7 | ScalarradiusMiscQuietPeriod | read-write | current | Quiet Period: used to define periods of time during which it will not attempt to acquire a supplicant (Default time is 60 seconds). |
| 1.3.6.1.5.4.1.8 | ScalarradiusMiscTxPeriod | read-write | current | Tx Period: used to determine when an EAPOL PDU is to be transmitted(Default value is 30 seconds). |
| 1.3.6.1.5.4.1.9 | ScalarradiusMiscSupplicantTimeout | read-write | current | Supplicant Timeout: used to determine timeout conditions in the exchanges between the supplicant and authentication server(Default value is 30 seconds). |
| 1.3.6.1.5.4.1.10 | ScalarradiusMiscServerTimeout | read-write | current | Server Timeout: used to determine timeout conditions in the exchanges between the authenticator and authentication server(Default value is 30 seconds). |
| 1.3.6.1.5.4.1.11 | ScalarradiusMiscReAuthMax | read-write | current | ReAuthMax: used to determine the number of reauthentication attempts that are permitted before the specific port becomes unauthorized (Default value is 2 times… |
| 1.3.6.1.5.4.1.12 | ScalarradiusMiscReauthPeriod | read-write | current | Reauth Period: used to determine a nonzero number of seconds between periodic reauthentication of the supplications(Default value is 3600 seconds). |
| 1.3.6.1.5.4.2 | NodeportAuthConfiguration | |||
| 1.3.6.1.5.4.2.1 | TableradiusPerPortCfgTable | not-accessible | current | Table of descriptive information and configuration about Radius per port configuration. |
| 1.3.6.1.5.4.2.1.1 | RowradiusPerPortCfgEntry | not-accessible | current | An entry in the table, containing inforamtion about Radius per port configuration. |
| 1.3.6.1.5.4.2.1.1.1 | ColumnradiusPerPortCfgIndex | not-accessible | current | Index of port. |
| 1.3.6.1.5.4.2.1.1.2 | ColumnradiusPerPortCfgPortName | read-only | current | The name of port. |
| 1.3.6.1.5.4.2.1.1.3 | ColumnradiusPerPortCfgState | read-write | current | You can select the specific port and configure the authorization state. Each port can select four kinds of authorization state : Reject: force the specific por… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING (SIZE (0..255)) MacAddress ::= OCTET STRING (SIZE (6)) PortList ::= OCTET STRING | current | |
| MacAddress | OCTET STRING (SIZE (6)) | ||
| PortList | OCTET STRING |