NMC-MIB
172 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.2 | Nodenmc | |||
| 1.3.6.1.4.1.429.1.2.1 | NodenmcCfg | |||
| 1.3.6.1.4.1.429.1.2.1.1 | ScalarnmcCfgSystemTime | read-write | mandatory | This parameter is used to set and read the current time as kept by the NMC's real-time clock. It should be set to the local time in the place where the chassis… |
| 1.3.6.1.4.1.429.1.2.1.2 | ScalarnmcCfgSystemDate | read-write | mandatory | This parameter is used to set and read the current date as kept by the NMC's real-time clock. It should be set to the local date where the chassis is physicall… |
| 1.3.6.1.4.1.429.1.2.1.3 | ScalarnmcGmtime | read-only | mandatory | This object reflects the current time in Greenwich Mean Time (GMT). The value of this object is sent in USR's enterprise specific SNMP trap messages for use by… |
| 1.3.6.1.4.1.429.1.2.1.4 | ScalarnmcTimezone | read-write | mandatory | This object should be set to reflect the timezone in which the chassis is physically located. It is used in the conversion from local time to Greenwich Mean Ti… |
| 1.3.6.1.4.1.429.1.2.1.5 | ScalarnmcCfgAuthFailTrapEnable | read-write | mandatory | This object indicates whether or not the SNMP Proxy Agent running in the Network Management Card is to send a trap upon reception of an SNMP message that was n… |
| 1.3.6.1.4.1.429.1.2.1.6 | ScalarnmcDaySavingTime | read-write | mandatory | The value of this object determines whether or not the NMC will honor daylight savings time when converting from local time to Greenwich Mean Time (GMT). |
| 1.3.6.1.4.1.429.1.2.1.7 | ScalarnmcCfgWanDialOutPhoneNum | read-write | mandatory | This is the phone number that the NMC will use to dial a modem that is connected to the WAN port if there is no existing connection when the NMC tries to send … |
| 1.3.6.1.4.1.429.1.2.1.8 | ScalarnmcCfgAtString | read-write | mandatory | This object is the user defined AT string that will be used to configure a modem connected to the NMC's WAN port if the NMC needs to dial out to make a connect… |
| 1.3.6.1.4.1.429.1.2.1.9 | ScalarnmcPowerUpAutoCfgEnable | read-write | mandatory | This parameter defines whether or not to automatically configure cards when they are inserted into the chassis or when the chassis is powered on. If set to do … |
| 1.3.6.1.4.1.429.1.2.1.10 | ScalarnmcCfgNumWanRetries | read-write | mandatory | This will specify the number of attempts to be made by port_write_task() to send the packet out of the WAN port while doing a dial up connection. The default i… |
| 1.3.6.1.4.1.429.1.2.1.11 | ScalarnmcCfgWanRetryPause | read-write | mandatory | The amount of time in seconds that the NMC will pause between attempts to transmit a packet. The default value for this object is 30. |
| 1.3.6.1.4.1.429.1.2.1.12 | ScalarnmcCfgWanRetrySuspendTime | read-write | mandatory | The Time period in seconds for which the WAN port should suspend its attempts to send out the packet. This time period applies when the number of failures has … |
| 1.3.6.1.4.1.429.1.2.1.13 | ScalarnmcCfgNumFailBefSuspend | read-write | mandatory | The number of connection failures to allow before suspending retries. |
| 1.3.6.1.4.1.429.1.2.1.14 | ScalarnmcCfgLogSrvrSelect | read-only | mandatory | The server selection for event logging. Default=none(3). |
| 1.3.6.1.4.1.429.1.2.1.15 | ScalarnmcCfgLogPriSrvrAddr | read-write | mandatory | The primary logging server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.16 | ScalarnmcCfgLogSecSrvrAddr | read-write | mandatory | The secondary logging server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.17 | ScalarnmcCfgLogUdpPortNum | read-write | mandatory | The logging server's UDP port number. Default=1646. |
| 1.3.6.1.4.1.429.1.2.1.18 | ScalarnmcCfgLogRetryCnt | read-write | mandatory | The NMC logging client transmission retry count. Default=3. |
| 1.3.6.1.4.1.429.1.2.1.19 | ScalarnmcCfgLogCallStatGrpSel | read-write | mandatory | The optional call statistics groups included in log messages. Groups are Usage(1), Data Transfer(2), Performance(3), Operating Mode(4) and RMMIE(5). Group 1 is… |
| 1.3.6.1.4.1.429.1.2.1.20 | ScalarnmcCfgLogMD5Calc | read-write | optional | This Optional Object will indicate to the accounting Client whether to calculate MD5 for accounting request message or not. default=disable. |
| 1.3.6.1.4.1.429.1.2.1.21 | ScalarnmcCfgTFTPTimeout | read-write | mandatory | This object will be used to set up the timeout for the TFTP retries. The default would be 12 sec and the maximum allowed timeout would be 30 sec. |
| 1.3.6.1.4.1.429.1.2.1.22 | ScalarnmcCfgDnsPriSrvrAddr | read-write | mandatory | The primary DNS server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.23 | ScalarnmcCfgDnsSecSrvrAddr | read-write | mandatory | The secondary DNS server's IP address. |
| 1.3.6.1.4.1.429.1.2.1.24 | ScalarnmcCfgLog3SrvrAddr | read-write | mandatory | The third backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.25 | ScalarnmcCfgLog4SrvrAddr | read-write | mandatory | The fourth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.26 | ScalarnmcCfgLog5SrvrAddr | read-write | mandatory | The fifth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.27 | ScalarnmcCfgLog6SrvrAddr | read-write | mandatory | The sixth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.28 | ScalarnmcCfgLog7SrvrAddr | read-write | mandatory | The seventh backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.29 | ScalarnmcCfgLog8SrvrAddr | read-write | mandatory | The eighth backup logging server IP address to use. |
| 1.3.6.1.4.1.429.1.2.1.30 | ScalarnmcCfgLogSrvrName | read-write | mandatory | The host name of the logging server. Used to resolve logging server IP addresses through DNS query requests from the resolver. |
| 1.3.6.1.4.1.429.1.2.1.31 | ScalarnmcCfgDnsRetryCnt | read-write | mandatory | The maximum number of retries that will be attempted to query a DNS before trying the secondary DNS. |
| 1.3.6.1.4.1.429.1.2.1.32 | ScalarnmcCfgDnsUdpPortNum | read-write | mandatory | The logging server's UDP port number. Default=53. |
| 1.3.6.1.4.1.429.1.2.1.33 | ScalarnmcCfgDnsSrvrSelect | read-only | mandatory | The server selection for DNS. Default=none(1). |
| 1.3.6.1.4.1.429.1.2.1.34 | ScalarnmcCfgLogDnsEna | read-write | mandatory | Indicates whether logging server host address DNS resolution is enabled or disabled. Disabled, the logging server addresses are taken from the log server addre… |
| 1.3.6.1.4.1.429.1.2.1.35 | ScalarnmcCfgLogStatusInterval | read-write | mandatory | This value defines the interval in seconds between Status-Server requests for a failed RADIUS Accounting server connection. Default=30. |
| 1.3.6.1.4.1.429.1.2.1.36 | ScalarnmcCfgDnsSrvrFailure | read-only | mandatory | This value defines the failure reason for last failure of DNS resolver query. |
| 1.3.6.1.4.1.429.1.2.1.37 | ScalarnmcCfgLogSrvrFailure | read-only | mandatory | This value defines the failure reason for the last failure of RADIUS accounting server access. |
| 1.3.6.1.4.1.429.1.2.1.38 | ScalarnmcCfgSessionIDNewFmt | read-write | optional | This Object is used to Enable/Disable the New Session ID Format. Default is Disable. |
| 1.3.6.1.4.1.429.1.2.2 | NodenmcStat | |||
| 1.3.6.1.4.1.429.1.2.2.1 | ScalarnmcStatStatus | read-only | mandatory | This object will indicate the general status or health of the Network Management Card. |
| 1.3.6.1.4.1.429.1.2.2.2 | ScalarnmcStatDramInstalled | read-only | mandatory | This object indicates the amount of dynamic RAM currently installed on the Network Management Card. The units for this value are kilobytes. |
| 1.3.6.1.4.1.429.1.2.2.3 | ScalarnmcStatNVRAMInstalled | read-only | mandatory | This object indicates the amount of non-volatile RAM currently installed on the Network Management Card. The units for this value are kilobytes. |
| 1.3.6.1.4.1.429.1.2.2.4 | ScalarnmcStatEventId | read-only | mandatory | This value increments once for each network management event detected by the NMC. It is used to correlate SNMP traps with events that occured in the system. |
| 1.3.6.1.4.1.429.1.2.2.5 | ScalarnmcStatTemperature | read-only | optional | This object reflects the current temperature in the NAS chassis, as detected by the NMC. The value of this object indicates the temperature in degree Celcius. |
| 1.3.6.1.4.1.429.1.2.2.6 | ScalarnmcStatPowerUpTstFailures | read-only | mandatory | This object contains the number of power up tests which failed during the power up of the NMC card. |
| 1.3.6.1.4.1.429.1.2.2.7 | ScalarnmcStatPowerUpTstFailBMap | read-only | mandatory | This object defines a bit map which contains a one in the postion that indicates a power up test failure. The number returned is an integer that represents whi… |
| 1.3.6.1.4.1.429.1.2.2.8 | ScalarnmcStatTestResult | read-only | mandatory | This object contains the bit mapped result of the request to perform a self test. A non zero value indicates that there has been one or more self test failures. |
| 1.3.6.1.4.1.429.1.2.2.9 | ScalarnmcStatCompSwVer | read-only | mandatory | This object contains the software compatibility version. |
| 1.3.6.1.4.1.429.1.2.2.10 | ScalarnmcStatPktBusClkSrc | read-only | optional | The source of the backplane packet bus clock. |
| 1.3.6.1.4.1.429.1.2.2.11 | ScalarnmcStatNmcPktBusClk | read-only | optional | The NMC's packet bus clock status. |
| 1.3.6.1.4.1.429.1.2.2.12 | ScalarnmcStatRedLed | read-only | optional | This Object will return the Reason why the Hub Status LED is RED. |
| 1.3.6.1.4.1.429.1.2.2.13 | ScalarnmcAuxIn1Sts | read-only | mandatory | This Object shows status of Aux Input port1. |
| 1.3.6.1.4.1.429.1.2.2.14 | ScalarnmcAuxIn2Sts | read-only | mandatory | This Object shows status of Aux Input port2. |
| 1.3.6.1.4.1.429.1.2.2.15 | ScalarnmcAuxOut1Sts | read-only | mandatory | This Object shows status of Aux Output port1. |
| 1.3.6.1.4.1.429.1.2.2.16 | ScalarnmcAuxOut2Sts | read-only | mandatory | This Object shows status of Aux Output port2. |
| 1.3.6.1.4.1.429.1.2.3 | NodenmcTrap | |||
| 1.3.6.1.4.1.429.1.2.3.1 | ScalarnmcTrapSequenceNumber | read-only | mandatory | This object increments every time a trap is generated by the NMC. This object is sent in the var-bind list of each trap and can be used by management stations … |
| 1.3.6.1.4.1.429.1.2.3.2 | TablenmcTrapDestTable | not-accessible | mandatory | This table defines the places to which traps are to be sent. These places may refer to management consoles, or other alarm collection processes. |
| 1.3.6.1.4.1.429.1.2.3.2.1 | RownmcTrapDestEntry | not-accessible | mandatory | There is an entry in this table for each destination to which the NMC is to send SNMP traps. |
| 1.3.6.1.4.1.429.1.2.3.2.1.1 | ColumnnmcTrapDestIP | read-only | mandatory | This object identifies the IP address to be used for sending traps to the destination identified by nmcTrapDestDescr. |
| 1.3.6.1.4.1.429.1.2.3.2.1.2 | ColumnnmcTrapDestCommunity | read-write | mandatory | This object identifies the community string to be used when sending traps to the destination identified by nmcTrapDestDescr. |
| 1.3.6.1.4.1.429.1.2.3.2.1.3 | ColumnnmcTrapDestDescr | read-write | mandatory | This object contains a plain text description of the trap destination to which this entry pertains. |
| 1.3.6.1.4.1.429.1.2.3.3 | ScalarnmcArTrapId | read-only | optional | A single user defined value can be configured through AutoResponse script MIB objects to be sent to the management stations when a NMC AutoResponse SNMP TRAP o… |
| 1.3.6.1.4.1.429.1.2.4 | NodenmcCmd | |||
| 1.3.6.1.4.1.429.1.2.4.1 | ScalarnmcCmdMgtStationId | read-write | mandatory | This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a com… |
| 1.3.6.1.4.1.429.1.2.4.2 | ScalarnmcCmdReqId | read-write | mandatory | This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this Network Management Card… |
| 1.3.6.1.4.1.429.1.2.4.3 | ScalarnmcCmdFunction | read-write | mandatory | This object contains the value which decsribe the command which is being invoked. |
| 1.3.6.1.4.1.429.1.2.4.4 | ScalarnmcCmdForce | read-write | mandatory | In some cases, the Network Managment Card may be in a state such that certain commands could adversely affect operations. In such cases, a command request with… |
| 1.3.6.1.4.1.429.1.2.4.5 | ScalarnmcCmdParam | read-write | mandatory | This object contains parameters that are specific to the particular command being issued. In some cases, there will be no additional parameters required. |
| 1.3.6.1.4.1.429.1.2.4.6 | ScalarnmcCmdResult | read-only | mandatory | This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset. |
| 1.3.6.1.4.1.429.1.2.4.7 | ScalarnmcCmdCode | read-only | mandatory | The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful. In the case of tests, a bi… |
| 1.3.6.1.4.1.429.1.2.6 | NodenmcHs | |||
| 1.3.6.1.4.1.429.1.2.6.1 | ScalarnmcHsDialInOutNamePrompt | read-write | optional | This is the first prompt that appears when users establish a connection with a security modem. It should serve to identify the system and prompt users to enter… |
| 1.3.6.1.4.1.429.1.2.6.2 | ScalarnmcHsDialInOutPsswdPrompt | read-write | optional | This prompt appears after a valid response has been made to the previous prompt (i.e., name string followed by CR/LF), and prompts users to enter their passwor… |
| 1.3.6.1.4.1.429.1.2.6.3 | ScalarnmcHsDialBackNamePrompt | read-write | optional | This prompt only appears when users are configured for dial back security (to either a stored or entered number). It is also only issued when the Request Login… |
| 1.3.6.1.4.1.429.1.2.6.4 | ScalarnmcHsDialBackPsswdPrompt | read-write | optional | This prompt appears after a valid response to the prior prompt, and prompts users to enter their password. |
| 1.3.6.1.4.1.429.1.2.6.5 | ScalarnmcHsDialBackPhonePrompt | read-write | optional | This prompt only appears if you have configured the user for dial back entered mode in the RADIUS user database. It prompts the user to enter the phone number … |
| 1.3.6.1.4.1.429.1.2.6.6 | ScalarnmcHsDialBackPendPrompt | read-write | optional | This message only appears if you configure users for a dial back mode (to either a stored or entered number) in the RADIUS user database. It confirms to users … |
| 1.3.6.1.4.1.429.1.2.6.7 | ScalarnmcHsMdmSelectPrompt | read-write | optional | This message only appears if a user is configured for dial back in the RADIUS database and that this record has the Request Dial Back Modem Selection field ena… |
| 1.3.6.1.4.1.429.1.2.6.8 | ScalarnmcHsLoginFailedMsg | read-write | optional | This message appears when users fail to enter a valid name/password combination. |
| 1.3.6.1.4.1.429.1.2.6.9 | ScalarnmcHsPhoneRestrictPrompt | read-write | optional | This message appears when users are prompted for a dial back phone number and the entered number violates the allowed numbers specified in the Call Restriction… |
| 1.3.6.1.4.1.429.1.2.6.10 | ScalarnmcHsInvalidMdmSelecMsg | read-write | optional | This message appears when users configured for dial back with the Request Dial-Back Modem Selection field enabled, select a modem to which they are not allowed… |
| 1.3.6.1.4.1.429.1.2.6.11 | ScalarnmcHsNoMdnsAvailMsg | read-write | optional | This message appears when the system is unable to reserve a modem for dial-back that was either selected by the user or defined in it's list of Allowed Dial Ba… |
| 1.3.6.1.4.1.429.1.2.6.12 | ScalarnmcHsConnectSuccessMsg | read-write | optional | This message confirms that users have successfully compleated their login and may proceed with either their dial-in or dial-out call. |
| 1.3.6.1.4.1.429.1.2.6.13 | ScalarnmcHsNewPasswordPrompt | read-write | optional | This prompt only appears when a users password has expired. It is issued once for the new password and then again for re-issue of the new password. |
| 1.3.6.1.4.1.429.1.2.6.14 | ScalarnmcHsChangePasswordMsg | read-write | optional | This message appears during name/password authentication when the user's password has expired. This message is immediately followed by the enter new password p… |
| 1.3.6.1.4.1.429.1.2.6.15 | ScalarnmcHsPromptRspTimeout | read-write | optional | This value represents the number of seconds in which users must respond to each prompt. Users failing to respond within the specified time are disconnected, an… |
| 1.3.6.1.4.1.429.1.2.6.16 | ScalarnmcHsPromptRspAttempts | read-write | optional | This value represents the number of tries the user is allowed per prompt during any one security session. If this number is reached, the call is terminated. Fo… |
| 1.3.6.1.4.1.429.1.2.6.17 | ScalarnmcHsPromptRspEchoEna | read-write | optional | When enabled, this option instructs the NMC to echo the user's typed responses back to the users screen. Password responses are echoed as 'X's. The default for… |
| 1.3.6.1.4.1.429.1.2.6.18 | ScalarnmcHsDialBackDelay | read-write | optional | This object defines the number of seconds to wait between successive dial back attempts; i.e., the time the NMC waits before attempting the next dial back when… |
| 1.3.6.1.4.1.429.1.2.6.19 | ScalarnmcHsDialBackAttempts | read-write | optional | This object defines the number of times that the NMC will attempt to dial back a dial in user configured for dial back when successive dial back attempts fail.… |
| 1.3.6.1.4.1.429.1.2.6.20 | ScalarnmcHsSecuritySrvrAddr | read-write | mandatory | This object identifies the IP address of the Primary RADIUS security server where the NMC RADIUS client sends requests. |
| 1.3.6.1.4.1.429.1.2.6.21 | ScalarnmcHsSecuritySrvrPort | read-write | mandatory | This object identifies the UDP port where the NMC's RADIUS client issues requests to the RADIUS security server. The default port is 1645. |
| 1.3.6.1.4.1.429.1.2.6.22 | ScalarnmcHsSecuritySrvrRetries | read-write | mandatory | This object identifies the number of retries that the NMC's RADIUS client will preform when attempting to send requests to a RADIUS security server. The defaul… |
| 1.3.6.1.4.1.429.1.2.6.23 | ScalarnmcHsMdmAttemptLimit | read-write | mandatory | This value represents the number of times an attempt can be made to login on any one modem without success. If this value is exceeded and the mdmLoginAttemptLi… |
| 1.3.6.1.4.1.429.1.2.6.24 | ScalarnmcHsServerUnavailable | read-write | mandatory | This option specifies whether to deny or allow a call when a dial security server is unreachable. Default = denyCall(1). |
| 1.3.6.1.4.1.429.1.2.6.25 | ScalarnmcHsServerSelect | read-only | mandatory | Server Selection for RADIUS Security. Default=none(3). |
| 1.3.6.1.4.1.429.1.2.6.26 | ScalarnmcHsSecondarySrvrAddr | read-write | mandatory | This object identifies the IP address of the Secondary RADIUS Security Server. |
| 1.3.6.1.4.1.429.1.2.6.27 | ScalarnmcHsDiPasswdEnaDis | read-write | optional | This Optional Object will Enable/Disable PASSWORD prompt for Dial-In Hub Security. Default is Enable(1). |
| 1.3.6.1.4.1.429.1.2.6.28 | ScalarnmcHsSecurity3SrvrAddr | read-write | mandatory | This object identifies the IP address of the 3rd RADIUS Security backup server. |
| 1.3.6.1.4.1.429.1.2.6.29 | ScalarnmcHsSecurity4SrvrAddr | read-write | mandatory | This object identifies the IP address of the 4th RADIUS Security backup server. |
| 1.3.6.1.4.1.429.1.2.6.30 | ScalarnmcHsSecurity5SrvrAddr | read-write | mandatory | This object identifies the IP address of the 5th RADIUS Security backup server. |
| 1.3.6.1.4.1.429.1.2.6.31 | ScalarnmcHsSecurity6SrvrAddr | read-write | mandatory | This object identifies the IP address of the 6th RADIUS Security backup server. |
| 1.3.6.1.4.1.429.1.2.6.32 | ScalarnmcHsSecurity7SrvrAddr | read-write | mandatory | This object identifies the IP address of the 7th RADIUS Security backup server. |
| 1.3.6.1.4.1.429.1.2.6.33 | ScalarnmcHsSecurity8SrvrAddr | read-write | mandatory | This object identifies the IP address of the 8th RADIUS Security backup server. |
| 1.3.6.1.4.1.429.1.2.6.34 | ScalarnmcHsSecuritySrvrName | read-write | mandatory | Identifies the host name of the RADIUS Security server used to resolve IP addresses through DNS queries. |
| 1.3.6.1.4.1.429.1.2.6.35 | ScalarnmcHsSecuritySrvrDnsEna | read-write | mandatory | Indicates RADIUS Security server IP addresses are resolved through DNS queries. If disabled, the Security server address objects are used. Default=disabled |
| 1.3.6.1.4.1.429.1.2.6.36 | ScalarnmcHsSecurityStatusInt | read-write | mandatory | This value defines the interval in seconds between Status-Server requests for a failed RADIUS Security server connection. Default=30. |
| 1.3.6.1.4.1.429.1.2.6.37 | ScalarnmcHsSecurityFailure | read-only | mandatory | This value defines the failure reason for the last failure of RADIUS Security server access. |
| 1.3.6.1.4.1.429.1.2.7 | NodenmcTe | |||
| 1.3.6.1.4.1.429.1.2.7.1 | ScalarnmcTeDialOutLoginFail | read-write | optional | Enable/disable for the trap generated when a dial out login security session has failed. |
| 1.3.6.1.4.1.429.1.2.7.2 | ScalarnmcTeDialInLoginFail | read-write | optional | Enable/disable for the trap generated when a dial in login security session has failed. |
| 1.3.6.1.4.1.429.1.2.7.3 | ScalarnmcTeDialOutRestrictNum | read-write | optional | Enable/disable for the trap generated when a dial out security session has failed as a result of attempting to dial a restricted phone number. |
| 1.3.6.1.4.1.429.1.2.7.4 | ScalarnmcTeDialBackRestrictNum | read-write | optional | Enable/disable for the trap generated when a dial back security session has failed as a result of attempting to dial a restricted phone number. |
| 1.3.6.1.4.1.429.1.2.7.5 | ScalarnmcTeUserBlacklist | read-write | optional | Enable/disable for the trap generated when a security user has reached their final failed login attempt number and is now being blacklisted. |
| 1.3.6.1.4.1.429.1.2.7.6 | ScalarnmcTeUserBlacklistLogin | read-write | optional | Enable/disable for the trap generated when a security login attempt by a currently blacklisted user has occurred. |
| 1.3.6.1.4.1.429.1.2.7.7 | ScalarnmcTeRespAttmptLimExceed | read-write | optional | Enable/disable for the trap generated when a security user has failed to issue a valid response to a particular security prompt before the configured limit. |
| 1.3.6.1.4.1.429.1.2.7.8 | ScalarnmcTeLoginAttmptLimExceed | read-write | optional | Enable/disable for the trap generated when a security session has failed because the indicated user does not appear in the security user database. |
| 1.3.6.1.4.1.429.1.2.7.9 | ScalarnmcTeLogSrvrLoss | read-write | mandatory | Enable/disable for the trap generated when communication with a logging server has been lost. |
| 1.3.6.1.4.1.429.1.2.7.10 | ScalarnmcTeSecSrvrLoss | read-write | mandatory | Enable/disable for the trap generated when communication with a security server has been lost. |
| 1.3.6.1.4.1.429.1.2.7.11 | ScalarnmcTeSinglePbClockFail | read-write | mandatory | Enable/disable for the trap generated when the NMC detects that there is a packet bus clock failure in a single slot. Default=enable(1). |
| 1.3.6.1.4.1.429.1.2.7.12 | ScalarnmcTePbClockSwitch | read-write | mandatory | Enable/disable for the trap generated when the NMC detects that there is a packet bus clock failure in multiple slots and the NMC has assumed the role of clock… |
| 1.3.6.1.4.1.429.1.2.7.13 | ScalarnmcTePbClockFail | read-write | mandatory | Enable/disable for the trap generated when the NMC detects that the packet bus clock on the NMC daughter board pcb has failed. Check status of nmcStatPktBusClk… |
| 1.3.6.1.4.1.429.1.2.7.14 | ScalarnmcTeDnsSrvrLoss | read-write | mandatory | Enable/disable for the trap generated when communication with the primary and secondary DNS server has been lost. |
| 1.3.6.1.4.1.429.1.2.7.15 | ScalarnmcTeNtpSrvrLoss | read-write | mandatory | Enable/disable for the trap generated when communication with all NTP servers has failed. |
| 1.3.6.1.4.1.429.1.2.7.16 | ScalarnmcTeNtpSrvrRestore | read-write | mandatory | Enable/disable for the trap generated when communication with the NTP server has been restored. |
| 1.3.6.1.4.1.429.1.2.7.17 | ScalarnmcTeNtpSrvrDegraded | read-write | mandatory | Enable/disable for the trap generated when communication with the primary NTP server has failed, but the secondary has been restored. |
| 1.3.6.1.4.1.429.1.2.7.18 | ScalarnmcTeDnsSrvrRestore | read-write | mandatory | Enable/disable for the trap generated when communication with the primary DNS server has been restored. Default=disable. |
| 1.3.6.1.4.1.429.1.2.7.19 | ScalarnmcTeDnsSrvrDegraded | read-write | mandatory | Enable/disable for the trap generated when communication with the primary DNS server has failed, but the secondary DNS server is operational. Default=disabled. |
| 1.3.6.1.4.1.429.1.2.7.20 | ScalarnmcTeLogSrvrRestore | read-write | mandatory | Enable/disable for the trap generated when communication with a logging server has been restored. |
| 1.3.6.1.4.1.429.1.2.7.21 | ScalarnmcTeLogSrvrGroupOper | read-write | mandatory | Enable/disable for the trap generated when the communication with the group of logging servers is operational with the primary server in service. |
| 1.3.6.1.4.1.429.1.2.7.22 | ScalarnmcTeLogSrvrGroupDegr | read-write | mandatory | Enable/disable from the trap generated when the communication with the group of logging servers has degraded with a non-primary server in service. |
| 1.3.6.1.4.1.429.1.2.7.23 | ScalarnmcTeLogSrvrGroupNonOp | read-write | mandatory | Enable/disable for the trap generated when the communication with the group of logging servers is non-operational. |
| 1.3.6.1.4.1.429.1.2.7.24 | ScalarnmcTeSecSrvrRestore | read-write | mandatory | Enable/disable for the trap generated when communication with the RADIUS Security server has been restored. Default=disabled |
| 1.3.6.1.4.1.429.1.2.7.25 | ScalarnmcTeSecSrvrGroupOper | read-write | mandatory | Enable/disable for the trap generated when communication to the RADIUS Security server group becomes operational. Default=disabled |
| 1.3.6.1.4.1.429.1.2.7.26 | ScalarnmcTeSecSrvrGroupDegr | read-write | mandatory | Enable/disable for the trap generated when communication to the RADIUS Security server group becomes degraded because of failure to contact primary server. Def… |
| 1.3.6.1.4.1.429.1.2.7.27 | ScalarnmcTeSecSrvrGroupNonOp | read-write | mandatory | Enable/disable for the trap generated when communication to the RADIUS Security server group becomes non-operational because of failure to contact any Security… |
| 1.3.6.1.4.1.429.1.2.8 | NodenmcUiCfg | |||
| 1.3.6.1.4.1.429.1.2.8.1 | ScalarnmcUiCfgLanIPAddr | read-write | mandatory | This contains the IP address of the LAN interface. |
| 1.3.6.1.4.1.429.1.2.8.2 | ScalarnmcUiCfgLanSubnetMask | read-write | mandatory | This specifies the subnet mask for LAN interface. |
| 1.3.6.1.4.1.429.1.2.8.3 | ScalarnmcUiCfgWanIPAddr | read-write | mandatory | This specifies the IP address for the WAN interface. |
| 1.3.6.1.4.1.429.1.2.8.4 | ScalarnmcUiCfgWanSubnetMask | read-write | mandatory | This specifies the Subnet mask for the WAN interface. |
| 1.3.6.1.4.1.429.1.2.8.5 | ScalarnmcUiCfgDefaultGwyIP | read-write | mandatory | This specifies the address of the Gateway to which the IP will forward those packets whose net ID does not match the net ID of either interface. |
| 1.3.6.1.4.1.429.1.2.8.6 | ScalarnmcUiCfgLocalTrIeeeAddr | read-write | mandatory | This gives the IEEE physical address of the Token Ring interface. |
| 1.3.6.1.4.1.429.1.2.8.7 | ScalarnmcUiCfgPrivateString | write-only | mandatory | This specifies the SNMP read-write community string. Default='private'. |
| 1.3.6.1.4.1.429.1.2.8.8 | ScalarnmcUiCfgLanIfEnable | read-write | optional | This parameter controls the enable/disable of the LAN interface. |
| 1.3.6.1.4.1.429.1.2.8.9 | ScalarnmcUiCfgPublicString | write-only | mandatory | This specifies the SNMP read-only community string. Default='public'. |
| 1.3.6.1.4.1.429.1.2.8.10 | ScalarnmcUiCfgRouteEnable | read-write | optional | This Parameter controls the ability of the NMC to route traffic between it's LAN and SLIP interfaces, Default = enable(1). |
| 1.3.6.1.4.1.429.1.2.8.11 | ScalarnmcUiCfgUiSlipCfg | read-write | optional | This is used to configure the UI port as SLIP or UI. Default=UI. |
| 1.3.6.1.4.1.429.1.2.8.12 | ScalarnmcUiCfgWan2IpAddr | read-write | mandatory | This contains the IP address of second SLIP port. |
| 1.3.6.1.4.1.429.1.2.8.13 | ScalarnmcUiCfgWan2SubnetMask | read-write | mandatory | This contains SubnetMask for Second Slip port. |
| 1.3.6.1.4.1.429.1.2.8.14 | ScalarnmcUiCfgInactiveTime | read-write | optional | This parameter is in minutes it is used as an Inactivity time on the UI port. The Default is 3 minutes and 0 minutes disables the feature. |
| 1.3.6.1.4.1.429.1.2.8.15 | ScalarnmcUiCfgPassword | read-write | optional | This parameter is used to Enable or Disable the PASSWORD protection for UI functions. Default = disabled. |
| 1.3.6.1.4.1.429.1.2.9 | NodenmcAuth | |||
| 1.3.6.1.4.1.429.1.2.9.1 | TablenmcAuthAccTable | not-accessible | mandatory | This table defines which management stations are allowed access to the NMC. |
| 1.3.6.1.4.1.429.1.2.9.1.1 | RownmcAuthAccEntry | not-accessible | mandatory | There is an entry for each management station allowd access to the NMC. |
| 1.3.6.1.4.1.429.1.2.9.1.1.1 | ColumnnmcAuthAccIpAddr | read-only | mandatory | This is the IP address of the station allowed access to the NMC. |
| 1.3.6.1.4.1.429.1.2.9.1.1.2 | ColumnnmcAuthAccNetMask | read-write | mandatory | This is the network mask of the station allowed access to the NMC. |
| 1.3.6.1.4.1.429.1.2.9.1.1.3 | ColumnnmcAuthAccDescr | read-write | mandatory | This is the description of the station allowed access to the NMC. |
| 1.3.6.1.4.1.429.1.2.10 | NodenmcNtp | |||
| 1.3.6.1.4.1.429.1.2.10.1 | ScalarnmcNtpSrvrPrimAddr | read-write | mandatory | The primary NTP server's IP address. |
| 1.3.6.1.4.1.429.1.2.10.2 | ScalarnmcNtpSrvrSecdAddr | read-write | mandatory | The secondary NTP server's IP address. This server is only accessed when responses from the primary have failed. |
| 1.3.6.1.4.1.429.1.2.10.3 | ScalarnmcNtpSyncInterval | read-write | mandatory | The synchronization interval between successive NTP requests in seconds. |
| 1.3.6.1.4.1.429.1.2.10.4 | ScalarnmcNtpOperationalMode | read-write | mandatory | The operational mode of the NTP client. In unicast mode, the NTP requests the current time from the primary NTP and uses the secondary NTP as a backup. |
| 1.3.6.1.4.1.429.1.2.10.5 | ScalarnmcNtpLastSyncTime | read-only | mandatory | The time since the last successful NTP synchronization in seconds. |
| 1.3.6.1.4.1.429.1.2.10.6 | ScalarnmcNtpLastSyncServer | read-only | mandatory | The last NTP server used to successfully synchronize time. |
| 1.3.6.1.4.1.429.1.2.10.7 | ScalarnmcNtpLastFailedTime | read-only | mandatory | The time since the last failed NTP synchronization attempt in seconds. |
| 1.3.6.1.4.1.429.1.2.10.8 | ScalarnmcNtpLastFailedServer | read-only | mandatory | The last NTP server used in a failed attempt to synchronize time. |