NMS-553-MIB
169 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6 | Nodedsx1 | |||
| 1.3.6.1.4.1.498.6.7 | Nodenms553 | |||
| 1.3.6.1.4.1.498.6.7.1 | Nodenms553Version | |||
| 1.3.6.1.4.1.498.6.7.1.1 | Scalarnms553MIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.6.7.1.2 | Tablenms553VersionTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.498.6.7.1.2.1 | Rownms553VersionEntry | not-accessible | mandatory | An entry in the GDC NMS 553 Version Table. |
| 1.3.6.1.4.1.498.6.7.1.2.1.1 | Columnnms553VersionIndex | read-only | mandatory | Identifies Version parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.7.1.2.1.2 | Columnnms553FirmwareRev | read-only | mandatory | |
| 1.3.6.1.4.1.498.6.7.2 | Nodenms553DS0Allocation | |||
| 1.3.6.1.4.1.498.6.7.2.1 | Tablenms553DS0AllocationSchemeTable | not-accessible | mandatory | The GDC NMS 553 DS0 allocation table |
| 1.3.6.1.4.1.498.6.7.2.1.1 | Rownms553DS0AllocationSchemeEntry | not-accessible | mandatory | The GDC NMS 553 Configuration table entry. |
| 1.3.6.1.4.1.498.6.7.2.1.1.1 | Columnnms553DS0AllocationSchemeIndex | read-only | mandatory | The index value which uniquely identifies the DSU to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and … |
| 1.3.6.1.4.1.498.6.7.2.1.1.2 | Columnnms553DS0AllocationScheme | read-write | mandatory | Identifies the DSU DS0 allocation scheme.The value consecutive(2) indicates that bundles of DS0s are allocated to channels consecutively from the starting DS0.… |
| 1.3.6.1.4.1.498.6.7.2.2 | Tablenms553DS0AllocationConfigTable | not-accessible | mandatory | The GDC DS0 Allocation Configuration table. Information in the entries of this table define the configuration of DS0 allocation for channels. There are entries… |
| 1.3.6.1.4.1.498.6.7.2.2.1 | Rownms553DS0AllocationConfigEntry | not-accessible | mandatory | The GDC DS0 Allocation Configuration table entry. |
| 1.3.6.1.4.1.498.6.7.2.2.1.1 | Columnnms553DS0AllocationConfigIndex | read-only | mandatory | The index value which uniquely identifies the channel to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, … |
| 1.3.6.1.4.1.498.6.7.2.2.1.2 | Columnnms553DS0AllocationBaseRate | read-write | mandatory | Indicates the DS0 base rate: either 56K or 64K bits per second. This is used in conjunction with the number of DS0s to determine the bandwidth of the channel. … |
| 1.3.6.1.4.1.498.6.7.2.2.1.3 | Columnnms553DS0AllocationStartingDS0 | read-write | mandatory | Indicates the starting DS0 number for the bundle of DS0s used for the channel. DS0 bundles are allocated starting at the DS0 defined by this integer. When this… |
| 1.3.6.1.4.1.498.6.7.2.2.1.4 | Columnnms553DS0AllocationNumberOfDS0s | read-write | mandatory | Indicates the number of DS0s for the bundle allocated to the channel. The number of DS0s, in conjunction with the DS0 base rate, also determines the bandwidth … |
| 1.3.6.1.4.1.498.6.7.2.2.1.5 | Columnnms553DS0AllocationInbandDccMode | read-write | mandatory | The mode of propagation of inband Diagnostics Communication Channel to the dedicated remote NMS553 unit. None specifies no inband DCC. Embedded is an allowed v… |
| 1.3.6.1.4.1.498.6.7.3 | Nodenms553Configuration | |||
| 1.3.6.1.4.1.498.6.7.3.1 | Tablenms553ChannelConfigTable | not-accessible | mandatory | The GDC 553 Channel Configuration table. |
| 1.3.6.1.4.1.498.6.7.3.1.1 | Rownms553ChannelConfigEntry | not-accessible | mandatory | The nms553 Channel Configuration table entry. |
| 1.3.6.1.4.1.498.6.7.3.1.1.1 | Columnnms553ChannelConfigIndex | read-only | mandatory | The index value which uniquely identifies the channel to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, … |
| 1.3.6.1.4.1.498.6.7.3.1.1.2 | Columnnms553ChannelSplitTiming | read-write | mandatory | Indicates whether or not to use split timing. The value disabled(1) indicates that channel's transmit timing is provided by the DSU. The value enabled(2) indic… |
| 1.3.6.1.4.1.498.6.7.3.1.1.3 | Columnnms553ChannelChannelType | read-only | mandatory | The channel interface type. The value none(1) indicates that there is no channel interface for the index. The value v35(2) indicates the channel interface is s… |
| 1.3.6.1.4.1.498.6.7.3.1.1.4 | Columnnms553ChannelClockInvert | read-write | mandatory | Clock invert option |
| 1.3.6.1.4.1.498.6.7.3.1.1.5 | Columnnms553ChannelDataInvert | read-write | mandatory | Data invert option |
| 1.3.6.1.4.1.498.6.7.3.1.1.6 | Columnnms553ChannelLocalDCD | read-write | mandatory | Controls the operation of Data Carrier Detect (DCD) signal. The value followsSignal(1) indicates that the channel's DCD follows the inband control mode idle (C… |
| 1.3.6.1.4.1.498.6.7.3.1.1.7 | Columnnms553ChannelLocalDSR | read-write | mandatory | Controls the operation of the Data Set Ready (DSR) signal. The value followsSignal(1) indicates that the channel's DSR follows the inband control mode idle (CM… |
| 1.3.6.1.4.1.498.6.7.3.1.1.8 | Columnnms553ChannelFlowControl | read-write | mandatory | Flow Control Option. This object is valid only when the control mode idle object nms553ChannelControlModeIdle is set to enabled(2). |
| 1.3.6.1.4.1.498.6.7.3.1.1.9 | Columnnms553ChannelRTSCTSControl | read-write | mandatory | Controls the function of the channel's Request To Send (RTS) and Clear To Send signals used for flow control. The value of ctsDelay10ms(1) indicates that CTS i… |
| 1.3.6.1.4.1.498.6.7.3.1.1.10 | Columnnms553ChannelEIAtestLeads | read-write | mandatory | Controls the channel's EIA test leads. The EIA test leads allow customer business equipment to initiate diagnostic tests through the assertion of the EIA test … |
| 1.3.6.1.4.1.498.6.7.3.1.1.11 | Columnnms553ChannelInbandLoop | read-write | mandatory | In-band loopcode enable/disable. The value disabled(1) indicates the channel does not enter an RDL loop when an inband RDL code is detected. The value enable(2… |
| 1.3.6.1.4.1.498.6.7.3.1.1.12 | Columnnms553ChannelInbandLoopCode | read-only | mandatory | In-band RDL code to send and/or receive by the channel. The value pn127(1) indicates that the in-band code sent/received is in accordance with CCITT V.54 PN-12… |
| 1.3.6.1.4.1.498.6.7.3.1.1.13 | Columnnms553ChannelInbandLoopdown | read-write | mandatory | The time limit in seconds before terminating a channel's RDL. The value inhibit(1) indicates that the loopdown time is disabled and the loopback will only term… |
| 1.3.6.1.4.1.498.6.7.3.1.1.14 | Columnnms553ChannelControlModeIdle | read-write | mandatory | Control Mode Idle (CMI) enable/disable. When the channel application is Nx56k and RTS/CTS delay is standard, then this object defines the the use of CMI to pro… |
| 1.3.6.1.4.1.498.6.7.3.2 | Tablenms553NetworkConfigTable | not-accessible | mandatory | The GDC 553 Network Configuration table. |
| 1.3.6.1.4.1.498.6.7.3.2.1 | Rownms553NetworkConfigEntry | not-accessible | mandatory | The nms553 Network Configuration table entry. |
| 1.3.6.1.4.1.498.6.7.3.2.1.1 | Columnnms553NetworkConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.7.3.2.1.2 | Columnnms553NetworkAdminLineType | read-write | mandatory | The values, in sequence, describe: 'auto' indicates the unit will determine framing. 'manEsf' indicates manual selection of extended superframe format. 'manD4'… |
| 1.3.6.1.4.1.498.6.7.3.2.1.3 | Columnnms553NetworkOperLineType | read-only | mandatory | The values, in sequence, describe: 'manEsf' indicates the current setting of Line type. 'manD4'indicates the current setting of Line type. 'unframed' indicates… |
| 1.3.6.1.4.1.498.6.7.3.2.1.4 | Columnnms553NetworkInterfaceType | read-write | mandatory | The operating mode of the interface. Setting the value of this object to ds1(1) configures the interface as standard DS1. Setting the value of this object to d… |
| 1.3.6.1.4.1.498.6.7.3.2.1.5 | Columnnms553NetworkPreequalization | read-write | mandatory | Is the preequalization of the transmitter of the interface. This object interoperates with the object nms553NetworkInterfaceType. When the value of nms553Netwo… |
| 1.3.6.1.4.1.498.6.7.3.2.1.6 | Columnnms553NetworkAdminLineBuildout | read-write | mandatory | This variable is used to set the Transmit Ntwk Build-Out value on the network side and is only valid if the nms553NetworkInterfaceType is set for ds1(1). The v… |
| 1.3.6.1.4.1.498.6.7.3.2.1.7 | Columnnms553NetworkOperLineBuildout | read-only | mandatory | This variable is used to report the current Ntwk build-out setting if the nms553NetworkInterfaceType is set for ds1(1). tx00dB(1) indicates the unit is set for… |
| 1.3.6.1.4.1.498.6.7.3.2.1.8 | Columnnms553NetworkOnesDensity | read-write | mandatory | The ones density restriction for the interface. The values of this object define the ones density restriction that is enforced on the interface. The value inhi… |
| 1.3.6.1.4.1.498.6.7.3.2.1.9 | Columnnms553NetworkTransmitClockSource | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.7.3.2.1.10 | Columnnms553NetworkFallbackClockSource | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.7.3.2.1.11 | Columnnms553NetworkFDLdcc | read-write | mandatory | Controls whether or not the DCC uses the FDL as its transport. The FDL is only available when the DS1 line type is ESF, a full DS1 interface is being used, and… |
| 1.3.6.1.4.1.498.6.7.3.2.1.12 | Columnnms553NetworkAISLoopdown | read-write | mandatory | The time in seconds when receiving a continuous AIS signal before a remotely initiated loopback is terminated. When this object has the value 4, then there is … |
| 1.3.6.1.4.1.498.6.7.3.2.1.13 | Columnnms553NetworkInbandFrame | read-write | mandatory | This variable is used to set the In-Band DS1 Loopback Code Detection. Framed(1) framing is done upon recognition of he inband loopback code. Unframed(2) no fra… |
| 1.3.6.1.4.1.498.6.7.3.2.1.14 | Columnnms553NetworkLoopbackConfig | read-write | mandatory | This variable is used to set the In-Band DS1 Loopback Code Detection. none(1) refers to when the in-band loopback codes are ignored. payload(2) designates a pa… |
| 1.3.6.1.4.1.498.6.7.3.2.1.15 | Columnnms553NetworkLineCoding | read-write | mandatory | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. nms553B8ZS refers to the … |
| 1.3.6.1.4.1.498.6.7.3.2.1.16 | Columnnms553NetworkFdl | read-write | mandatory | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: nms553Fdl-none(1) indicates that the device does not use the… |
| 1.3.6.1.4.1.498.6.7.3.3 | Scalarnms553ConfigurationSave | read-write | mandatory | This variable is used to set the update status flag for saving network and channel configuration settings. Management can only set to network(1), channel(2), o… |
| 1.3.6.1.4.1.498.6.7.4 | Nodenms553DteStatus | |||
| 1.3.6.1.4.1.498.6.7.4.1 | Tablenms553DteStatusTable | not-accessible | mandatory | The nms553 DTE Signal Status table. Information in the entries of this table define the status of DSU channel interface leads. There are entries in this table … |
| 1.3.6.1.4.1.498.6.7.4.1.1 | Rownms553DteStatusEntry | not-accessible | mandatory | The nms553 DTE Signal Status table entry. |
| 1.3.6.1.4.1.498.6.7.4.1.1.1 | Columnnms553DteStatusIndex | read-only | mandatory | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.7.4.1.1.2 | Columnnms553DteStat | read-only | mandatory | Returns a bitwise snapshot of the DTE signals. Octet 1 bit 7 - not used bit 6 - CTS (1:ON; 0:OFF) bit 5 - RTS (1:ON; 0:OFF) bit 4 - DTR (1:ON; 0:OFF) bit 3 - D… |
| 1.3.6.1.4.1.498.6.7.5 | Nodenms553Diagnostics | |||
| 1.3.6.1.4.1.498.6.7.5.1 | Tablenms553DiagTable | not-accessible | mandatory | The NMS 553 Diagnostics table. |
| 1.3.6.1.4.1.498.6.7.5.1.1 | Rownms553DiagEntry | not-accessible | mandatory | The SNMP553S Diagnostics table entry. |
| 1.3.6.1.4.1.498.6.7.5.1.1.1 | Columnnms553DiagIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.7.5.1.1.2 | Columnnms553DiagTestDuration | read-write | mandatory | Selects the duration to run a diagnostic test. The value(1) noLimit signifies that the test should run indefinitely until explicitly terminated. |
| 1.3.6.1.4.1.498.6.7.5.1.1.3 | Columnnms553DiagProgPattern | read-write | mandatory | The 16 bit user programmable test pattern. This object works with the nms553DiagSendCode object in that when nms553DiagSendCode is set to sendProgPattern(4), t… |
| 1.3.6.1.4.1.498.6.7.5.1.1.4 | Columnnms553DiagBeginSelfTest | read-write | mandatory | A set of 1-8 will start the selected test with the indicated pattern. A 9 cannot be set by management. A read will always return a 9. |
| 1.3.6.1.4.1.498.6.7.5.1.1.5 | Columnnms553DiagBeginLoopTest | read-write | mandatory | A set will start the selected test. |
| 1.3.6.1.4.1.498.6.7.5.1.1.6 | Columnnms553DiagTestResults | read-only | mandatory | The results of the last diagnostic test. This can be the current test running or the last completed test. The units of the value of this object depend on the t… |
| 1.3.6.1.4.1.498.6.7.5.1.1.7 | Columnnms553DiagResetTestToNormal | read-write | mandatory | This object will halt the execution of any and all diagnostic test that may be running with the exception of the Network Delay Test. |
| 1.3.6.1.4.1.498.6.7.5.1.1.8 | Columnnms553DiagTestStatus | read-only | mandatory | This object will return the test current test in progress, if any. |
| 1.3.6.1.4.1.498.6.7.6 | Nodenms553Maintenance | |||
| 1.3.6.1.4.1.498.6.7.6.1 | Tablenms553MaintenanceTable | not-accessible | mandatory | The table describes the maintenance functions for the nms553. |
| 1.3.6.1.4.1.498.6.7.6.1.1 | Rownms553MaintenanceEntry | not-accessible | mandatory | An entry in the GDC maintenance Table |
| 1.3.6.1.4.1.498.6.7.6.1.1.1 | Columnnms553MaintenanceIndex | read-only | mandatory | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.7.6.1.1.2 | Columnnms553LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state and front panel switches. Octet 1 bit 7 - not used bit 6 - ON (0:LED inactive 1:LED active) bit 5 - DSX… |
| 1.3.6.1.4.1.498.6.7.6.1.1.3 | Columnnms553SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(1), then the unit performs a soft reset. The value norm will be returned when … |
| 1.3.6.1.4.1.498.6.7.6.1.1.4 | Columnnms553DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault, the unit will reset to the … |
| 1.3.6.1.4.1.498.6.7.6.1.1.5 | Columnnms553FrontPanel | read-write | mandatory | This variable is used to indicate whether the front panel switches are operational or not. |
| 1.3.6.1.4.1.498.6.7.6.1.1.6 | Columnnms553ProductType | read-only | mandatory | Indicates the product type of the unit. |
| 1.3.6.1.4.1.498.6.7.6.1.1.7 | Columnnms553ResetStatistics | read-write | mandatory | Supports the action of soft resetting the nms553ValidIntervals object. When this object is set to reset(2), then the unit will reset the nms553ValidIntervals o… |
| 1.3.6.1.4.1.498.6.7.6.1.1.8 | Columnnms553ValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in… |
| 1.3.6.1.4.1.498.6.7.6.1.1.9 | Columnnms553CascadePresent | read-only | mandatory | Identifies whether or not the cascade interface cards are installed. |
| 1.3.6.1.4.1.498.6.7.6.1.1.10 | Columnnms553ReceiveLevel | read-only | mandatory | This variable reports the absolute value of the network relative receive level of -40dB to +3dB when the nms553networkInterfaceType is set for ds1(1). Values 1… |
| 1.3.6.1.4.1.498.6.7.7 | Nodenms553Alarms | |||
| 1.3.6.1.4.1.498.6.7.7.1 | Nodenms553AlarmData | |||
| 1.3.6.1.4.1.498.6.7.7.1.1 | Nodenms553NoResponseAlm | |||
| 1.3.6.1.4.1.498.6.7.7.1.2 | Nodenms553DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.6.7.7.1.3 | Nodenms553PowerUpAlm | |||
| 1.3.6.1.4.1.498.6.7.7.1.4 | Nodenms553NvRamCorrupt | |||
| 1.3.6.1.4.1.498.6.7.7.1.5 | Nodenms553UnitFailure | |||
| 1.3.6.1.4.1.498.6.7.7.1.6 | Nodenms553TimingLoss | |||
| 1.3.6.1.4.1.498.6.7.7.1.7 | Nodenms553StatusChange | |||
| 1.3.6.1.4.1.498.6.7.7.1.8 | Nodenms553UnsolicitedTest | |||
| 1.3.6.1.4.1.498.6.7.7.1.9 | Nodenms553LossOfSignal | |||
| 1.3.6.1.4.1.498.6.7.7.1.10 | Nodenms553LossOfFrame | |||
| 1.3.6.1.4.1.498.6.7.7.1.11 | Nodenms553AlarmIndicationSignal | |||
| 1.3.6.1.4.1.498.6.7.7.1.12 | Nodenms553ReceivedYellow | |||
| 1.3.6.1.4.1.498.6.7.7.1.13 | Nodenms553UnavailableSignalState | |||
| 1.3.6.1.4.1.498.6.7.7.1.14 | Nodenms553ExcessiveZeros | |||
| 1.3.6.1.4.1.498.6.7.7.1.15 | Nodenms553LowAverageDensity | |||
| 1.3.6.1.4.1.498.6.7.7.1.16 | Nodenms553ControlledSlips | |||
| 1.3.6.1.4.1.498.6.7.7.1.17 | Nodenms553BipolarViolations | |||
| 1.3.6.1.4.1.498.6.7.7.1.18 | Nodenms553CrcErrors | |||
| 1.3.6.1.4.1.498.6.7.7.2 | Tablenms553AlarmConfigTable | not-accessible | mandatory | The nms553AlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit … |
| 1.3.6.1.4.1.498.6.7.7.2.1 | Rownms553AlarmConfigEntry | not-accessible | mandatory | An entry in the GDC Alarm Configuration table. |
| 1.3.6.1.4.1.498.6.7.7.2.1.1 | Columnnms553AlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.7.7.2.1.2 | Columnnms553AlarmConfigIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.6.7.7.2.1.3 | Columnnms553AlarmCountWindow | read-write | mandatory | This variable sets/reads the BPV alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. |
| 1.3.6.1.4.1.498.6.7.7.2.1.4 | Columnnms553AlarmCountThreshold | read-write | mandatory | This function sets/reads the BPV alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a giv… |
| 1.3.6.1.4.1.498.6.7.8 | Nodenms553AlarmHistory | |||
| 1.3.6.1.4.1.498.6.7.8.1 | Tablenms553AlarmHistoryTable | not-accessible | mandatory | The nms553AlarmHistoryTable contains entries that report the history of all supported alarms. The history consists of the the number of times the alarm has occ… |
| 1.3.6.1.4.1.498.6.7.8.1.1 | Rownms553AlarmHistoryEntry | not-accessible | mandatory | An entry in the GDC NMS553 Alarm History table. |
| 1.3.6.1.4.1.498.6.7.8.1.1.1 | Columnnms553AlarmHistoryIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.7.8.1.1.2 | Columnnms553AlarmHistoryIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.6.7.8.1.1.3 | Columnnms553AlarmCount | read-only | mandatory | The number of occurrences of this alarm. This objects value is incremented once for each time that the alarm occurs. This count is incremented regardless of wh… |
| 1.3.6.1.4.1.498.6.7.8.1.1.4 | Columnnms553AlarmFirstOccurrenceHours | read-only | mandatory | The hour (0-23) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.5 | Columnnms553AlarmFirstOccurrenceMinutes | read-only | mandatory | The minute (0-59) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.6 | Columnnms553AlarmFirstOccurrenceSeconds | read-only | mandatory | The second (0-59) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.7 | Columnnms553AlarmFirstOccurrenceMonth | read-only | mandatory | The month (1-12) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.8 | Columnnms553AlarmFirstOccurrenceDay | read-only | mandatory | The day (1-31) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.9 | Columnnms553AlarmFirstOccurrenceYear | read-only | mandatory | The year (0-99) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.10 | Columnnms553AlarmLastOccurrenceHours | read-only | mandatory | The hour (0-23) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.11 | Columnnms553AlarmLastOccurrenceMinutes | read-only | mandatory | The minute (0-59) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.12 | Columnnms553AlarmLastOccurrenceSeconds | read-only | mandatory | The second (0-59) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.13 | Columnnms553AlarmLastOccurrenceMonth | read-only | mandatory | The month (1-12) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.14 | Columnnms553AlarmLastOccurrenceDay | read-only | mandatory | The day (1-31) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.7.8.1.1.15 | Columnnms553AlarmLastOccurrenceYear | read-only | mandatory | The year (0-99) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.7.8.2 | Tablenms553AlarmMaintenanceTable | not-accessible | mandatory | The nms553AlarmMaintenanceTable contains entries that configure the real time clock and that clear the alarm history table. |
| 1.3.6.1.4.1.498.6.7.8.2.1 | Rownms553AlarmMaintenanceEntry | not-accessible | mandatory | An entry in the GDC nms553 Alarm Maintenance Table. |
| 1.3.6.1.4.1.498.6.7.8.2.1.1 | Columnnms553AlarmMaintenanceIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.7.8.2.1.2 | Columnnms553ClearAlarmHistory | read-write | mandatory | Supports the action of clearing the alarm history table. When this object is set to clear(1), then the unit clears the alarm history table. The value of norm(2… |
| 1.3.6.1.4.1.498.6.7.8.2.1.3 | Columnnms553RTCHours | read-write | mandatory | The hour of day (0-23) to be set or read. |
| 1.3.6.1.4.1.498.6.7.8.2.1.4 | Columnnms553RTCMinutes | read-write | mandatory | The minute of the hour (0-59) to be set or read. |
| 1.3.6.1.4.1.498.6.7.8.2.1.5 | Columnnms553RTCSeconds | read-write | mandatory | The second of the minute (0-59) to be set or read. |
| 1.3.6.1.4.1.498.6.7.8.2.1.6 | Columnnms553RTCMonth | read-write | mandatory | The month of the year (1-12) to be set or read. |
| 1.3.6.1.4.1.498.6.7.8.2.1.7 | Columnnms553RTCDay | read-write | mandatory | The day of the month (1-31) to be set or read. |
| 1.3.6.1.4.1.498.6.7.8.2.1.8 | Columnnms553RTCYear | read-write | mandatory | The year (0-99) to be set or read. |
| 1.3.6.1.4.1.498.6.7.8.2.1.9 | Columnnms553TimeOfLastAlarmClear | read-only | mandatory | Returns the time (hours,minutes,seconds,month,day,year) of the last alarm clear command sent to the unit. Octet 1 - Hour of last alarm clear (0-23) Octet 2 - M… |
| 1.3.6.1.4.1.498.6.7.9 | Nodenms553Performance | |||
| 1.3.6.1.4.1.498.6.7.9.1 | Tablenms553CurrentTable | not-accessible | mandatory | The nms553 Current table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.7.9.1.1 | Rownms553CurrentEntry | not-accessible | mandatory | An entry in the nms553 Current table. |
| 1.3.6.1.4.1.498.6.7.9.1.1.1 | Columnnms553CurrentIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.7.9.1.1.2 | Columnnms553CurrentESs | read-only | mandatory | The number of Errored Seconds, encountered by a DS1 interface in the current 15 minute inter- val. |
| 1.3.6.1.4.1.498.6.7.9.1.1.3 | Columnnms553CurrentSESs | read-only | mandatory | The number of Severely Errored Seconds encoun- tered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.7.9.1.1.4 | Columnnms553CurrentBESs | read-only | mandatory | The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.7.9.1.1.5 | Columnnms553CurrentUASs | read-only | mandatory | The number of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.498.6.7.9.1.1.6 | Columnnms553CurrentLOFCs | read-only | mandatory | The number of Loss of Frame Counts (LOFCs) encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.7.9.1.1.7 | Columnnms553CurrentCSSs | read-only | mandatory | The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.7.9.2 | Tablenms553IntervalTable | not-accessible | mandatory | The nms553 Interval table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.7.9.2.1 | Rownms553IntervalEntry | not-accessible | mandatory | An entry in the DS1 Interval table. |
| 1.3.6.1.4.1.498.6.7.9.2.1.1 | Columnnms553IntervalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.7.9.2.1.2 | Columnnms553IntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed minute interval and 96 is the least recently completed 15 minutes interval (assuming that all… |
| 1.3.6.1.4.1.498.6.7.9.2.1.3 | Columnnms553IntervalESs | read-only | mandatory | The number of Errored Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| 1.3.6.1.4.1.498.6.7.9.2.1.4 | Columnnms553IntervalSESs | read-only | mandatory | The number of Severely Errored Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.498.6.7.9.2.1.5 | Columnnms553IntervalBESs | read-only | mandatory | The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.498.6.7.9.2.1.6 | Columnnms553IntervalUASs | read-only | mandatory | The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.498.6.7.9.2.1.7 | Columnnms553IntervalLOFCs | read-only | mandatory | The number of Loss of Frame Counts (LOFCs) encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.7.9.2.1.8 | Columnnms553IntervalCSSs | read-only | mandatory | The number of Controlled Slip Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.498.6.7.9.3 | Tablenms553TotalTable | not-accessible | mandatory | The DS1 Total table. 24 hour interval. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.7.9.3.1 | Rownms553TotalEntry | not-accessible | mandatory | An entry in the DS1 Total table. |
| 1.3.6.1.4.1.498.6.7.9.3.1.1 | Columnnms553TotalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.7.9.3.1.2 | Columnnms553TotalESs | read-only | mandatory | The number of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval |
| 1.3.6.1.4.1.498.6.7.9.3.1.3 | Columnnms553TotalSESs | read-only | mandatory | The number of Severely Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.498.6.7.9.3.1.4 | Columnnms553TotalBESs | read-only | mandatory | The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.498.6.7.9.3.1.5 | Columnnms553TotalUASs | read-only | mandatory | The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.498.6.7.9.3.1.6 | Columnnms553TotalLOFCs | read-only | mandatory | The number of Loss of Frame Counts (LOFCs) encountered by a DS1interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.7.9.3.1.7 | Columnnms553TotalCSSs | read-only | mandatory | The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the previous 24 hour interval. |