NOVELSAT-MODULATOR-MIB
127 objects
novelsat MIB branch for Modulator products
Imported Objects
| IF-MIB | ifIndex |
| NOVELSAT-ROOT-MIB | nsRoot |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.37576.3 | IdentitynsModulator | novelsat MIB branch for Modulator products | ||
| 1.3.6.1.4.1.37576.3.1 | IdentitynsModConfig | current | Modulator MIB branch that holds all Modulator parameters. | |
| 1.3.6.1.4.1.37576.3.1.1 | IdentitynsModConfigLine | current | Modulator MIB branch that holds all Modulator line parameters. | |
| 1.3.6.1.4.1.37576.3.1.1.1 | ScalarnsModConfigLineTXStatus | read-write | current | This parameter determine the TX status: enabled/disabled. |
| 1.3.6.1.4.1.37576.3.1.1.2 | ScalarnsModConfigLineMode | read-write | current | This parameter holds Line mode. |
| 1.3.6.1.4.1.37576.3.1.1.4 | ScalarnsModConfigLineChPriority | read-write | current | This parameter is no longer supported |
| 1.3.6.1.4.1.37576.3.1.1.5 | ScalarnsModConfigLineRollOff | read-write | current | This parameter holds Line roll off. rollOff005 = 0.05 rollOff010 = 0.10 rollOff015 = 0.15 rollOff020 = 0.20 rollOff025 = 0.25 rollOff035 = 0.35 |
| 1.3.6.1.4.1.37576.3.1.1.6 | ScalarnsModConfigLineSineStatus | read-write | current | This parameter holds Line sine status: on/off. |
| 1.3.6.1.4.1.37576.3.1.1.7 | ScalarnsModConfigLineRFFreq | read-write | current | This parameter holds Line RF frequency in 10Hrz. |
| 1.3.6.1.4.1.37576.3.1.1.8 | ScalarnsModConfigLineSymbolRate | read-write | current | This parameter holds Line symbol rate in SPS. |
| 1.3.6.1.4.1.37576.3.1.1.9 | ScalarnsModConfigLinePower | read-write | current | This parameter holds Line power in hundreds of dBm. |
| 1.3.6.1.4.1.37576.3.1.1.10 | ScalarnsModConfigLineGoldSeq | read-write | current | This parameter holds Line golden sequence. |
| 1.3.6.1.4.1.37576.3.1.1.11 | ScalarnsModConfigLineDualChState | read-write | current | This parameter holds Line dual channel status: dual/single channel. |
| 1.3.6.1.4.1.37576.3.1.1.12 | ScalarnsModConfigLineBitRate | read-write | current | This parameter holds Line bit rate in bPS. |
| 1.3.6.1.4.1.37576.3.1.1.13 | ScalarnsModConfigLinePowerUpTXState | read-write | current | This parameter holds Line Power-Up TX State: disable/enable. |
| 1.3.6.1.4.1.37576.3.1.1.14 | ScalarnsModConfigLineAcmMode | read-write | current | This parameter holds Line ACM mode: enable/disable. |
| 1.3.6.1.4.1.37576.3.1.1.15 | ScalarnsModConfigLineOutputLevelMode | read-write | current | This parameter holds Line output level mode. |
| 1.3.6.1.4.1.37576.3.1.1.16 | ScalarnsModConfigLineChannel1Bandwidth | read-write | current | This parameter holds Channel-1 allocated bandwidth percentage. |
| 1.3.6.1.4.1.37576.3.1.1.17 | ScalarnsModConfigLineChannel2Bandwidth | read-write | current | This parameter holds Channel-2 allocated bandwidth percentage. |
| 1.3.6.1.4.1.37576.3.1.1.18 | ScalarnsModConfigLineSpectrumInvert | read-write | current | This parameter holds Line spectrum invert status: on/off. |
| 1.3.6.1.4.1.37576.3.1.1.19 | ScalarnsModConfigLineRecommendedBitRate | read-only | current | This parameter holds Line recommended bit rate in bPS. |
| 1.3.6.1.4.1.37576.3.1.1.20 | ScalarnsModConfigLineLOFreq | read-write | current | This parameter holds Line LO frequency in 10Hrz. |
| 1.3.6.1.4.1.37576.3.1.1.21 | ScalarnsModConfigLineAcmUseManagementIp | read-write | current | This parameter is no longer supported |
| 1.3.6.1.4.1.37576.3.1.1.22 | ScalarnsModConfigLineAcmIpAddress | read-write | current | This parameter is no longer supported |
| 1.3.6.1.4.1.37576.3.1.1.23 | ScalarnsModConfigLineAcmIpNetmask | read-write | current | This parameter is no longer supported |
| 1.3.6.1.4.1.37576.3.1.1.24 | ScalarnsModConfigLineAupcMode | read-write | current | This parameter holds Line AUPC mode: enable/disable. |
| 1.3.6.1.4.1.37576.3.1.1.25 | ScalarnsModConfigLineAupcSatRxFreq | read-write | current | This parameter holds AUPC satellite RX Frequency in hundreds of GHz. |
| 1.3.6.1.4.1.37576.3.1.1.26 | ScalarnsModConfigLineAupcSatRxPolarity | read-write | current | This parameter holds AUPC satellite RX Polarity: vertical/horizontal/circular. |
| 1.3.6.1.4.1.37576.3.1.1.27 | ScalarnsModConfigLineAupcSatTxFreq | read-write | current | This parameter holds AUPC satellite TX Frequency in hundreds of GHz. |
| 1.3.6.1.4.1.37576.3.1.1.28 | ScalarnsModConfigLineAupcSatTxPolarity | read-write | current | This parameter holds AUPC satellite TX Polarity: vertical/horizontal/circular. |
| 1.3.6.1.4.1.37576.3.1.1.29 | ScalarnsModConfigLineAupcMaxGain | read-write | current | This parameter holds AUPC maximal gain in hundreds of dBm. |
| 1.3.6.1.4.1.37576.3.1.1.30 | ScalarnsModConfigLineAupcMaxAttn | read-write | current | This parameter holds AUPC maximal Attenuation in hundreds of dBm. |
| 1.3.6.1.4.1.37576.3.1.2 | IdentitynsModConfigChannel | current | Modulator MIB branch that holds all Modulator channel parameters. | |
| 1.3.6.1.4.1.37576.3.1.2.1 | TablensModConfigChannelTable | not-accessible | current | A list of Channel parameters |
| 1.3.6.1.4.1.37576.3.1.2.1.1 | RownsModConfigChannelEntry | not-accessible | current | Conceptual row in table for each channel. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.1 | ColumnnsModConfigChStatus | read-write | current | This parameter holds channel status. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.2 | ColumnnsModConfigChSource | read-write | current | This parameter holds channel source. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.3 | ColumnnsModConfigChNPD | read-write | current | This parameter is no longer supported |
| 1.3.6.1.4.1.37576.3.1.2.1.1.4 | ColumnnsModConfigChFrameSize | read-write | current | This parameter holds channel frame size. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.5 | ColumnnsModConfigChModulation | read-write | current | This parameter holds channel modulation. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.6 | ColumnnsModConfigChFECRate | read-write | current | This parameter holds channel FEC rate. fec1Div5 = 1/5 fec1Div4 = 1/4 fec1Div3 = 1/3 fec2Div5 = 2/5 fec13Div30 = 13/30 fec4Div9 = 4/9 fec7Div15 = 7/15 fec22Div4… |
| 1.3.6.1.4.1.37576.3.1.2.1.1.7 | ColumnnsModConfigChPilot | read-write | current | This parameter holds channel pilot. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.8 | ColumnnsModConfigChISSY | read-write | current | This parameter holds channel ISSY. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.9 | ColumnnsModConfigChStreamFormat | read-write | current | This parameter holds channel stream format. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.10 | ColumnnsModConfigChPacketSize | read-write | current | This parameter holds channel packet size. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.11 | ColumnnsModConfigChSyncByte | read-write | current | This parameter holds channel sync byte. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.12 | ColumnnsModConfigChIsi | read-write | current | This parameter holds channel ISI value. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.13 | ColumnnsModConfigChPCRRestamping | read-write | current | This parameter is no longer supported |
| 1.3.6.1.4.1.37576.3.1.2.1.1.14 | ColumnnsModConfigChMpegProcessingMode | read-write | current | This parameter holds channel MPEG processing mode. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.15 | ColumnnsModConfigChBitRate | read-write | current | This parameter holds channel bit rate in bPS. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.16 | ColumnnsModConfigChBitRatePercent | read-only | current | This parameter holds calculated channel bit rate as percent from maximal theoretical channel bitrate. |
| 1.3.6.1.4.1.37576.3.1.2.1.1.17 | ColumnnsModConfigChTSProtect | read-write | current | Protect transport stream data, enabling constant bit-rate at the receiver, replacing RF link error frames by Null-packets. |
| 1.3.6.1.4.1.37576.3.1.3 | IdentitynsModConfigInterface | current | Modulator MIB branch that holds all Modulator Interface parameters. | |
| 1.3.6.1.4.1.37576.3.1.3.1 | TablensModConfigInterfaceTestTable | not-accessible | current | A list of Test interfaces |
| 1.3.6.1.4.1.37576.3.1.3.1.1 | RownsModConfigInterfaceTestEntry | not-accessible | current | Conceptual row in table for each test interface. |
| 1.3.6.1.4.1.37576.3.1.3.1.1.1 | ColumnnsModConfigInterfaceTestPattern | read-write | current | This parameter holds Test interface pattern. pattern2Pwr07Neg1 = 2^07-1 pattern2Pwr09Neg1 = 2^09-1 pattern2Pwr11Neg1 = 2^11-1 pattern2Pwr15Neg1 = 2^15-1 patter… |
| 1.3.6.1.4.1.37576.3.1.3.1.1.2 | ColumnnsModConfigInterfaceTestInvert | read-write | current | This parameter holds Test interface invert. |
| 1.3.6.1.4.1.37576.3.1.3.2 | TablensModConfigInterfaceASITable | not-accessible | current | A list of ASI interfaces |
| 1.3.6.1.4.1.37576.3.1.3.2.1 | RownsModConfigInterfaceASIEntry | not-accessible | current | Conceptual row in table for each ASI interface. |
| 1.3.6.1.4.1.37576.3.1.3.2.1.1 | ColumnnsModConfigInterfaceASIDataOrder | read-write | current | This parameter holds ASI interface data order. |
| 1.3.6.1.4.1.37576.3.1.3.3 | TablensModConfigInterfaceEthernetTable | not-accessible | current | A list of Ethernet interfaces |
| 1.3.6.1.4.1.37576.3.1.3.3.1 | RownsModConfigInterfaceEthernetEntry | not-accessible | current | Conceptual row in table for each Ethernet interface. |
| 1.3.6.1.4.1.37576.3.1.3.3.1.1 | ColumnnsModConfigInterfaceEthernetAutoNegotiation | read-write | current | This parameter holds Ethernet interface auto-negotiation status |
| 1.3.6.1.4.1.37576.3.1.3.3.1.2 | ColumnnsModConfigInterfaceEthernetSpeed | read-write | current | This parameter holds Ethernet interface speed |
| 1.3.6.1.4.1.37576.3.1.3.3.1.3 | ColumnnsModConfigInterfaceEthernetDuplex | read-write | current | This parameter holds Ethernet interface Duplex |
| 1.3.6.1.4.1.37576.3.1.3.3.1.4 | ColumnnsModConfigInterfaceEthernetEncapsulation | read-write | current | This parameter holds Ethernet interface Encapsulation |
| 1.3.6.1.4.1.37576.3.1.3.3.1.5 | ColumnnsModConfigInterfaceEthernetPid | read-write | current | This parameter holds Ethernet interface PID value |
| 1.3.6.1.4.1.37576.3.1.3.4 | TablensModConfigInterfaceGigETable | not-accessible | current | A list of GigE interfaces |
| 1.3.6.1.4.1.37576.3.1.3.4.1 | RownsModConfigInterfaceGigEEntry | not-accessible | current | Conceptual row in table for each gigE interface. |
| 1.3.6.1.4.1.37576.3.1.3.4.1.1 | ColumnnsModConfigInterfaceGigEAutoNegotiation | read-write | current | This parameter holds GigE interface auto-negotiation status |
| 1.3.6.1.4.1.37576.3.1.3.4.1.2 | ColumnnsModConfigInterfaceGigESpeed | read-write | current | This parameter holds GigE interface speed |
| 1.3.6.1.4.1.37576.3.1.3.4.1.3 | ColumnnsModConfigInterfaceGigEDuplex | read-write | current | This parameter holds GigE interface Duplex |
| 1.3.6.1.4.1.37576.3.1.3.4.1.5 | ColumnnsModConfigInterfaceGigEPortType | read-write | current | This parameter holds GigE interface port type value |
| 1.3.6.1.4.1.37576.3.1.4 | IdentitynsModConfigCid | current | Modulator MIB branch that holds all Modulator CID parameters. | |
| 1.3.6.1.4.1.37576.3.1.4.1 | ScalarnsModConfigCidState | read-write | current | This parameter determine the CID state: enabled/disabled. |
| 1.3.6.1.4.1.37576.3.1.4.2 | ScalarnsModConfigCidLatitude | read-write | current | This parameter determine the CID latitude to transmit. |
| 1.3.6.1.4.1.37576.3.1.4.3 | ScalarnsModConfigCidLongitude | read-write | current | This parameter determine the CID longitude to transmit. |
| 1.3.6.1.4.1.37576.3.1.4.4 | ScalarnsModConfigCidPhone | read-write | current | This parameter determine the CID phone number to transmit. |
| 1.3.6.1.4.1.37576.3.1.4.5 | ScalarnsModConfigCidExtension | read-write | current | This parameter determine the CID phone extension to transmit. |
| 1.3.6.1.4.1.37576.3.1.4.6 | ScalarnsModConfigCidUsertext | read-write | current | This parameter determine the CID user text to transmit. |
| 1.3.6.1.4.1.37576.3.2 | IdentitynsModMonitor | current | Modulator MIB branch that holds all Demodulator status and alarms. | |
| 1.3.6.1.4.1.37576.3.2.1 | IdentitynsModMonitorInterface | current | Modulator MIB branch that holds all Modulator interface statuses. | |
| 1.3.6.1.4.1.37576.3.2.1.1 | TablensModMonitorInterfaceTable | not-accessible | current | A list of interface statuses |
| 1.3.6.1.4.1.37576.3.2.1.1.1 | RownsModMonitorInterfaceEntry | not-accessible | current | Conceptual row in table for each interface. |
| 1.3.6.1.4.1.37576.3.2.1.1.1.1 | ColumnnsModMonitorInterfaceDataRate | read-only | current | This parameter holds Interface data rate status (bps). |
| 1.3.6.1.4.1.37576.3.2.1.1.1.2 | ColumnnsModMonitorInterfaceStatus | read-only | current | This parameter holds Interface status. |
| 1.3.6.1.4.1.37576.3.2.1.1.1.3 | ColumnnsModMonitorInterfaceChannel | read-only | current | This parameter holds Interface channel. |
| 1.3.6.1.4.1.37576.3.2.1.1.1.4 | ColumnnsModMonitorInterfaceName | read-only | current | This parameter holds Interface name. |
| 1.3.6.1.4.1.37576.3.2.2 | IdentitynsModMonitorSystem | current | Modulator MIB branch that holds all Modulator system statuses. | |
| 1.3.6.1.4.1.37576.3.2.2.1 | ScalarnsModMonitorSystemBoardTmp | read-only | current | This parameter holds system board temperature status in hundreds of Celsius degrees. |
| 1.3.6.1.4.1.37576.3.2.2.2 | ScalarnsModMonitorSystem10MHrzClkSource | read-only | current | This parameter holds system 10MHrz clock source. |
| 1.3.6.1.4.1.37576.3.2.2.3 | ScalarnsModMonitorSystemRefClkOut | read-only | current | This parameter holds system ref clock out. |
| 1.3.6.1.4.1.37576.3.2.2.4 | ScalarnsModMonitorSystemTxPortClk | read-only | current | This parameter holds system TX port clock. |
| 1.3.6.1.4.1.37576.3.2.3 | IdentitynsModMonitorEthernet | current | Common MIB branch that holds all Ethernet statistics. | |
| 1.3.6.1.4.1.37576.3.2.3.1 | TablensModMonitorEthernetTable | not-accessible | current | List of Ethernet Statistics |
| 1.3.6.1.4.1.37576.3.2.3.1.1 | RownsModMonitorEthernetEntry | not-accessible | current | Conceptual row in table for each event. |
| 1.3.6.1.4.1.37576.3.2.3.1.1.1 | ColumnnsModMonitorEthernetStatisticsNumber | not-accessible | current | Ethernet Statistics Number |
| 1.3.6.1.4.1.37576.3.2.3.1.1.2 | ColumnnsModMonitorEthernetStatisticsName | read-only | current | Name of Ethernet Statistics |
| 1.3.6.1.4.1.37576.3.2.3.1.1.3 | ColumnnsModMonitorEthernetStatisticsValueA | read-only | current | Value of Ethernet Statistics |
| 1.3.6.1.4.1.37576.3.2.3.1.1.4 | ColumnnsModMonitorEthernetStatisticsValueB | read-only | current | Value of Ethernet Statistics |
| 1.3.6.1.4.1.37576.3.2.4 | IdentitynsModMonitorAcm | current | Common MIB branch that holds all ACM statistics. | |
| 1.3.6.1.4.1.37576.3.2.4.1 | TablensModMonitorAcmTable | not-accessible | current | List of ACM Statistics |
| 1.3.6.1.4.1.37576.3.2.4.1.1 | RownsModMonitorAcmEntry | not-accessible | current | Conceptual row in table for each event. |
| 1.3.6.1.4.1.37576.3.2.4.1.1.1 | ColumnnsModMonitorAcmStatisticsNumber | not-accessible | current | ACM Statistics Number |
| 1.3.6.1.4.1.37576.3.2.4.1.1.2 | ColumnnsModMonitorAcmStatisticsClientIp | read-only | current | ACM Statistics- Client IP |
| 1.3.6.1.4.1.37576.3.2.4.1.1.3 | ColumnnsModMonitorAcmStatisticsClientName | read-only | current | ACM client's name |
| 1.3.6.1.4.1.37576.3.2.4.1.1.4 | ColumnnsModMonitorAcmStatisticsClientSnr | read-only | current | ACM Statistics- Received SNR from client hundreds of dB |
| 1.3.6.1.4.1.37576.3.2.4.1.1.5 | ColumnnsModMonitorAcmStatisticsClientMargin | read-only | current | ACM Statistics- Received margin from client |
| 1.3.6.1.4.1.37576.3.2.4.1.1.6 | ColumnnsModMonitorAcmStatisticsChannelNum | read-only | current | ACM Statistics- Channel number |
| 1.3.6.1.4.1.37576.3.2.4.1.1.7 | ColumnnsModMonitorAcmStatisticsLineMode | read-only | current | ACM Statistics- Modulator line mode value |
| 1.3.6.1.4.1.37576.3.2.4.1.1.8 | ColumnnsModMonitorAcmStatisticsModulation | read-only | current | ACM Statistics- Matching MCT modulation value |
| 1.3.6.1.4.1.37576.3.2.4.1.1.9 | ColumnnsModMonitorAcmStatisticsFecRate | read-only | current | ACM Statistics- Matching MCT FEC rate value fec1Div5 = 1/5 fec1Div4 = 1/4 fec1Div3 = 1/3 fec2Div5 = 2/5 fec13Div30 = 13/30 fec4Div9 = 4/9 fec7Div15 = 7/15 fec2… |
| 1.3.6.1.4.1.37576.3.2.4.1.1.10 | ColumnnsModMonitorAcmStatisticsFrameSize | read-only | current | ACM Statistics- Matching MCT frame size value |
| 1.3.6.1.4.1.37576.3.2.4.1.1.11 | ColumnnsModMonitorAcmStatisticsPilot | read-only | current | ACM Statistics- Matching MCT pilot value |
| 1.3.6.1.4.1.37576.3.2.4.1.1.12 | ColumnnsModMonitorAcmStatisticsIsLocked | read-only | current | ACM Statistics- Is client locked |
| 1.3.6.1.4.1.37576.3.2.4.1.1.13 | ColumnnsModMonitorAcmStatisticsIsWorstCase | read-only | current | ACM Statistics- no longer supported |
| 1.3.6.1.4.1.37576.3.2.4.1.1.14 | ColumnnsModMonitorAcmStatisticsState | read-only | current | ACM Statistics- Client's state |
| 1.3.6.1.4.1.37576.3.2.4.1.1.15 | ColumnnsModMonitorAcmStatisticsGroup | read-only | current | ACM Statistics- group |
| 1.3.6.1.4.1.37576.3.2.4.2 | ScalarnsModMonitorAcmStatisticsClrCmd | read-write | current | Clear ACM statistics command |
| 1.3.6.1.4.1.37576.3.2.5 | IdentitynsModMonitorAupc | current | Modulator MIB branch that holds all AUPC statistics. | |
| 1.3.6.1.4.1.37576.3.2.5.1 | ScalarnsModMonitorAupcCurrentPower | read-only | current | AUPC monitor - Current output power in hundreds of dBm |
| 1.3.6.1.4.1.37576.3.2.5.2 | ScalarnsModMonitorAupcMinimalPower | read-only | current | AUPC monitor - Minimal output power in hundreds of dBm |
| 1.3.6.1.4.1.37576.3.2.5.3 | ScalarnsModMonitorAupcMaximalPower | read-only | current | AUPC monitor - Maximal output power in hundreds of dBm |
| 1.3.6.1.4.1.37576.3.2.5.4 | ScalarnsModMonitorAupcAveragePower | read-only | current | AUPC monitor - Average output power in hundreds of dBm |
| 1.3.6.1.4.1.37576.3.2.5.5 | ScalarnsModMonitorAupcEstimatedUplinkAttn | read-only | current | AUPC monitor - Estimated uplink attenuation in hundreds of dBm |
| 1.3.6.1.4.1.37576.3.2.5.6 | ScalarnsModMonitorAupcEstimatedDownlinkAttn | read-only | current | AUPC monitor - Estimated downlink attenuation in hundreds of dBm |
| 1.3.6.1.4.1.37576.3.2.5.7 | ScalarnsModMonitorAupcResetAvgCmd | read-write | current | Restart AUPC monitor power averaging |