NRC-HUB1-MIB
45 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.315 | Nodenrc | |||
| 1.3.6.1.4.1.315.1 | Nodehub1 | |||
| 1.3.6.1.4.1.315.1.1 | Scalarhub1AutoPartition | read-write | mandatory | The value 'enabled' indicates that the HUB should auto partition ports. The value 'disabled' will disable this feature. |
| 1.3.6.1.4.1.315.1.2 | Scalarhub1ReconnectOnTransmission | read-write | mandatory | The value 'enabled' indicates that the HUB will reconnect an auto partitioned port if the HUB receives a packet from a partitioned port. The value 'disabled' i… |
| 1.3.6.1.4.1.315.1.3 | Scalarhub1IncludeOutOfWinColl | read-write | mandatory | A value of 'enabled' will cause Out Of Window Collisions to be counted along with In Window Collisions (as defined by IEEE 802.3) when determining if the colli… |
| 1.3.6.1.4.1.315.1.4 | Scalarhub1LoopbackPartition | read-write | mandatory | A value of 'enabled' will cause the HUB to automatically partition a port where a lack of loopback from the transeiver is detected. A value of 'disabled' will … |
| 1.3.6.1.4.1.315.1.5 | Scalarhub1CollisionLimit | read-write | mandatory | If consecutive collisions exceeding the value of this variable are detected on a port, the port will be auto partitioned 31 is the IEEE 802.3 consecutive colli… |
| 1.3.6.1.4.1.315.1.6 | Scalarhub1CarrierRecoverTime | read-write | mandatory | Time to recover carrier. A value of 'short' will use 3 bit times (IEEE 802.3 specification). A value of 'long' will use 5 bit times. |
| 1.3.6.1.4.1.315.1.7 | Scalarhub1EventCounterFlags | read-write | mandatory | A bit mask indicating which error types will cause an increment in the hub1PortEventCount Counter. Each bit has the following significance where each bit is li… |
| 1.3.6.1.4.1.315.1.8 | Scalarhub1EventRecordFlags | read-write | mandatory | A bit mask indicating which error types will cause corresponding bits in hub1PortEventRecordValue to be set when an error is detected. Each bit has the followi… |
| 1.3.6.1.4.1.315.1.9 | Scalarhub1BridgingMode | read-write | mandatory | Operational mode of the bridge: bridging Packets are being selectively forwarded according to the internal dynamically built tables. bypass All packets are bei… |
| 1.3.6.1.4.1.315.1.10 | Scalarhub1ProtocolFilterMode | read-write | mandatory | Filtering Mode of the Hub: off The protocol filtering logic is disabled. filter The protocol filtering logic is enabled and packets with the protocol types ind… |
| 1.3.6.1.4.1.315.1.11 | Scalarhub1FilterProtocols | read-write | mandatory | Protocol types to be filtered or passed by the bridging logic. This is a variable length array of between 0 and 16 2-byte entries, each entry containing the 2-… |
| 1.3.6.1.4.1.315.1.12 | Scalarhub1ConsoleBaudRate | read-write | mandatory | The baud rate of the console port. Legal values are 9600, 4800, 2400, and 1200. |
| 1.3.6.1.4.1.315.1.13 | Scalarhub1Reset | read-write | mandatory | Setting this object to 'reset' will cause the Hub1 to perform a hardware reset within approximately 5 seconds. Setting this object to 'no-reset will have no ef… |
| 1.3.6.1.4.1.315.1.14 | Scalarhub1SoftwareVersion | read-write | mandatory | The version of software running on the Hub. On versions of the Hub that support dynamic download, this variable may be set to cause a new version of the softwa… |
| 1.3.6.1.4.1.315.1.15 | Tablehub1PortTable | not-accessible | mandatory | A table of port specific information for the NRC HUB 1 product. This table supplements the Repeater MIB Ports Table. |
| 1.3.6.1.4.1.315.1.15.1 | Rowhub1PortEntry | not-accessible | mandatory | A list of information for every port. |
| 1.3.6.1.4.1.315.1.15.1.1 | Columnhub1PortIndex | read-only | mandatory | Port number that corresponds to the index value in the Repeater MIB variable rptrPortIndex. |
| 1.3.6.1.4.1.315.1.15.1.2 | Columnhub1PortForceReconnect | read-write | mandatory | Setting this variable to the value 'force- reconnect' will cause the port to be reconnected assuming that it is currently in the 'Partition' state. If the port… |
| 1.3.6.1.4.1.315.1.15.1.3 | Columnhub1PortPartitionReason | read-only | mandatory | Reason for port being in the partitioned state. If the port is currently not partitioned, this variable will have the value 'not-partitioned'. |
| 1.3.6.1.4.1.315.1.15.1.4 | Columnhub1PortLinkState | read-only | mandatory | This variable's meaning varies depending on the type of HUB: 10Base2 Not Applicable. A value of 'unknown' will always be returned. 10BaseT Link Test is being r… |
| 1.3.6.1.4.1.315.1.15.1.5 | Columnhub1PortLinkEnable | read-write | mandatory | Enabling this variable has the following effect depending on the type of HUB: 10Base2 No Effect 10BaseT Link Test Enabled Fiber LMON Test Enabled |
| 1.3.6.1.4.1.315.1.15.1.6 | Columnhub1PortPolarityStatus | read-only | mandatory | Current port Polarity status. NOTE: a value of 'ok' will always be returned for 10Base2 and FOIRL HUBs |
| 1.3.6.1.4.1.315.1.15.1.7 | Columnhub1PortName | read-write | mandatory | Administrator assigned ASCII port name. |
| 1.3.6.1.4.1.315.1.15.1.8 | Columnhub1PortEventCount | read-only | mandatory | Counter of all error events that were detected on this port and at the same time were marked for collection in the hub1EventCounterFlags variable. This is a 16… |
| 1.3.6.1.4.1.315.1.15.1.9 | Columnhub1PortRecordValue | read-only | mandatory | Bit Mask that has bits set for each error event that was detected on this port and at the same time was marked for collection in the hub1EventRecordFlags varia… |
| 1.3.6.1.4.1.315.1.15.1.10 | Columnhub1PortType | read-only | mandatory | The type of port |
| 1.3.6.1.4.1.315.1.16 | Tablehub1IFTable | not-accessible | mandatory | A table that contains HUB 1 specific supplements to the MIB-II interfaces table. |
| 1.3.6.1.4.1.315.1.16.1 | Rowhub1IFEntry | not-accessible | mandatory | Entries in the HUB 1 supplement table. |
| 1.3.6.1.4.1.315.1.16.1.1 | Columnhub1IFIndex | read-only | mandatory | Interface index that corresponds to ifIndex in the interfaces table from MIB II. |
| 1.3.6.1.4.1.315.1.16.1.2 | Columnhub1IFInAlignmentErrors | read-only | mandatory | The number of alignment errors detected by this interface. |
| 1.3.6.1.4.1.315.1.16.1.3 | Columnhub1IFInCrcErrors | read-only | mandatory | The number of CRC errors detected by this interface. |
| 1.3.6.1.4.1.315.1.16.1.4 | Columnhub1IFInCollisions | read-only | mandatory | The number of collisions detected by this interface. |
| 1.3.6.1.4.1.315.1.16.1.5 | Columnhub1IFInMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this interface on receive due to an excessive size. |
| 1.3.6.1.4.1.315.1.16.1.6 | Columnhub1IFInShortErrors | read-only | mandatory | The number of frames discarded by this interface because they were less than the Ethernet minumum frame size of 64 bytes. |
| 1.3.6.1.4.1.315.1.16.1.7 | Columnhub1IFInOverrunDiscards | read-only | mandatory | The number of frames discarded by this interface due to a LAN Controller FIFO overflow on receive. |
| 1.3.6.1.4.1.315.1.16.1.8 | Columnhub1IFOutUnderruns | read-only | mandatory | The number of frames which had to be retransmitted by this interface due to a LAN Controller FIFO underrun error on transmit. |
| 1.3.6.1.4.1.315.1.16.1.9 | Columnhub1IFOutLostCts | read-only | mandatory | The number of times Carrier Transmit Sense (CTS) was lost on this interface during frame transmission. The hub will attempt to retransmit frames when transmiss… |
| 1.3.6.1.4.1.315.1.16.1.10 | Columnhub1IFOutLostCrs | read-only | mandatory | The number of times Carrier Receive Sense (CRS) was lost on this interface during frame transmission. The hub will attempt to retransmit frames when transmissi… |
| 1.3.6.1.4.1.315.1.16.1.11 | Columnhub1IFOutMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this interface on transmit due to an excessive size. |
| 1.3.6.1.4.1.315.1.16.1.12 | Columnhub1IFOutCollisions | read-only | mandatory | The number of collisions detected by this interface while attempting to transmit a packet. |
| 1.3.6.1.4.1.315.1.16.1.13 | Columnhub1IFChannelUtilization | read-only | mandatory | Utilization statistics for the last 60 seconds of operation of the bridging logic associated with this interface. The OCTET STRING is a series of 45 16-bit wor… |
| 1.3.6.1.4.1.315.1.17 | Scalarhub1LastFailureReason | read-only | mandatory | The last error that caused a Hub failure. A value of zero (0) indicates that there has not been a Hub failure since the novram was last erased. A non-zero valu… |