NSCDXGLIP-MIB
173 objects
No module-level DESCRIPTION found.
Imported Objects
| NSC-MIB | nscDx |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10.2.1.3.4 | NodenscDxGreenline | |||
| 1.3.6.1.4.1.10.2.1.3.4.1 | TablenscDxGlChannelTable | not-accessible | mandatory | List of channel interface entries. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1 | RownscDxGlChannelEntry | not-accessible | mandatory | Channel interface entry. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.1 | ColumnnscDxGlChanEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.2 | ColumnnscDxGlChanEntType | read-only | mandatory | Channel interface type. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.3 | ColumnnscDxGlChanEntActivityState | read-only | mandatory | This is the actual state of the HCI (which depends on the IP state and online/offline state of the HCI). |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.4 | ColumnnscDxGlChanEntResetState | read-only | mandatory | This identifies the pending channel reset to process. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.5 | ColumnnscDxGlChanEntIplState | read-only | mandatory | This is the state prior to the first command chain being completed. It is used for IPL. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.6 | ColumnnscDxGlChanEntIpState | read-only | mandatory | This indicates whether the interface has been set online by the coprocessor. It indicates whether a Start I/F has been sent by the coprocessor. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.7 | ColumnnscDxGlChanEntOnlineOfflineState | read-only | mandatory | This indicates the state of the switch on the back of the HCI. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.8 | ColumnnscDxGlChanEntPolling | read-write | mandatory | For a bus-tag-hci type channel this indicates whether the HCI will request polling on the RCIs that it connects to. For a bus-tag-rci type channel this indicat… |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.9 | ColumnnscDxGlChanEntActiveSubchannel | read-only | mandatory | The HCI device address of the active device. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.10 | ColumnnscDxGlChanEntMemoryResourcesLimited | read-only | mandatory | Indicator of memory resource limitation. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.11 | ColumnnscDxGlChanEntTagOverruns | read-only | mandatory | Number of channel overruns. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.12 | ColumnnscDxGlChanEntDcOverruns | read-only | mandatory | Number of channel overruns in DC interlock mode. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.13 | ColumnnscDxGlChanEntDsOverruns | read-only | mandatory | Number of channel overruns in data streaming mode. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.14 | ColumnnscDxGlChanEntDmaParityErrors | read-only | mandatory | Number of DMA parity errors. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.15 | ColumnnscDxGlChanEntCrcErrors | read-only | mandatory | Number of CRC errors. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.16 | ColumnnscDxGlChanEntResetsDuringDma | read-only | mandatory | Number of times the DMA operation has been terminated by channel resets (selective reset, interface reconnect, system reset). |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.17 | ColumnnscDxGlChanEntCmdParityErrors | read-only | mandatory | Number of channel command parity errors (a Bus parity error with Command Out active). |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.18 | ColumnnscDxGlChanEntUnsupportedStatuses | read-only | mandatory | Number of unsupported status errors. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.19 | ColumnnscDxGlChanEntMiscompareParityErrors | read-only | mandatory | Number of miscompare parity errors. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.20 | ColumnnscDxGlChanEntSelectionTimeouts | read-only | mandatory | Number of selection timeouts. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.21 | ColumnnscDxGlChanEntStatusAcceptDiscIns | read-only | mandatory | Number of status accept disconnect in errors. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.22 | ColumnnscDxGlChanEntStatusAcceptTimeouts | read-only | mandatory | Number of status accept timeouts. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.23 | ColumnnscDxGlChanEntStatusWaitDiscIns | read-only | mandatory | Number of status wait disconnect in errors. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.24 | ColumnnscDxGlChanEntStatusWaitTimeouts | read-only | mandatory | Number of status wait timeouts. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.25 | ColumnnscDxGlChanEntOpInActiveTimeouts | read-only | mandatory | Number of op inactive timeouts. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.26 | ColumnnscDxGlChanEntNumCus | read-only | mandatory | Number of control units per interface. |
| 1.3.6.1.4.1.10.2.1.3.4.1.1.27 | ColumnnscDxGlChanEntChannelStatus | read-only | mandatory | The status of the channel interface. |
| 1.3.6.1.4.1.10.2.1.3.4.2 | NodenscDxGlProfiles | |||
| 1.3.6.1.4.1.10.2.1.3.4.2.1 | TablenscDxGlProfControlUnitTable | not-accessible | mandatory | List of Control Unit entries. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1 | RownscDxGlProfControlUnitEntry | not-accessible | mandatory | Control Unit entry. This entry defines controller and device operating characteristics. Some of the characteristics are: the address ranges the HCI responds to… |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.1 | ColumnnscDxGlProfCuEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.2 | ColumnnscDxGlProfCuEntCuNum | read-only | mandatory | The profile number of the controller. The HCI supports up to 16 controller definitions (a unique set of operating and address characteristics for a type of dev… |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.3 | ColumnnscDxGlProfCuEntNumDevices | read-only | mandatory | Number of devices on this control unit. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.4 | ColumnnscDxGlProfCuEntOnlineOfflineState | read-write | mandatory | The profiled state of the device(s). |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.5 | ColumnnscDxGlProfCuEntDeviceType | read-write | mandatory | The type of device associated with the controller function. The controller uses a specific CCW table tailored for the unique operating characteristics of that … |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.6 | ColumnnscDxGlProfCuEntHostStartingDevAddr | read-write | mandatory | The first HCI device address in the range of addresses associated with the specified controller definition. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.7 | ColumnnscDxGlProfCuEntHostEndingDevAddr | read-write | mandatory | The last HCI device address in the range of addresses associated with the specified controller definition. NOTE: This is used in conjunction with the nscDxGlPr… |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.8 | ColumnnscDxGlProfCuEntHostChannelSpeed | read-write | mandatory | The HCI channel speed to the host. This defines to the HCI the data transfer protocol and data transfer rate used for the specified controller definition. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.9 | ColumnnscDxGlProfCuEntHostBufferRequirements | read-write | mandatory | The number of data buffers the HCI will allocate for a write I/O command. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.10 | ColumnnscDxGlProfCuEntRmtIpAddr | read-write | mandatory | The IP address of the remote interface, either an RCI where devices are attached, or an HCI for CTC. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.11 | ColumnnscDxGlProfCuEntRmtStartingDevAddr | read-write | mandatory | The first remote device address in the range of addresses associated with the specified controller definition. This can be used only to map addresses recognize… |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.12 | ColumnnscDxGlProfCuEntRmtBufferHold | read-write | mandatory | This indicates whether an RCI should wait for all the data associated with a CCW to be received before starting the device. Each device-type CCW table assigns … |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.13 | ColumnnscDxGlProfCuEntRmtChannelSpeed | read-write | mandatory | The remote channel speed to the device. This defines to the remote interface what data transfer protocol and data transfer rate should be used for the specifie… |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.14 | ColumnnscDxGlProfCuEntRmtBufferRequirements | read-write | mandatory | The number of data buffers an RCI will allocate for read I/O commands. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.15 | ColumnnscDxGlProfCuEntUnsolStatusOption | read-write | mandatory | This variable profiles the HCI to handle unsolicited status. When unsolicited status is received by the HCI from an RCI, the status is queued for presentation … |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.16 | ColumnnscDxGlProfCuEntDevDriverOptions | read-write | mandatory | The device driver options. See the 7220/7256 Host & Remote Channel Interfaces (HCI & RCI) with Greenline-IP software (GLH-IP/GLD-IP) reference manual (460793).… |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.17 | ColumnnscDxGlProfCuEntHostBufferHold | read-write | mandatory | This indicates whether the HCI should wait for all of the data associated with a CCW to be received before reconnecting to the channel. |
| 1.3.6.1.4.1.10.2.1.3.4.2.1.1.18 | ColumnnscDxGlProfCuEntWindowSize | read-write | mandatory | This variable specifies the number of IP packets that transport will sent before it waits for an acknowledgement to come back. The following value are allowed.… |
| 1.3.6.1.4.1.10.2.1.3.4.2.2 | TablenscDxGlProfDeviceTable | not-accessible | mandatory | List of Device entries. |
| 1.3.6.1.4.1.10.2.1.3.4.2.2.1 | RownscDxGlProfDeviceEntry | not-accessible | mandatory | Device entry. States whether device is profiled online or offline. |
| 1.3.6.1.4.1.10.2.1.3.4.2.2.1.1 | ColumnnscDxGlProfDevEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.2.2.1.2 | ColumnnscDxGlProfDevEntDevice | read-only | mandatory | Starting address of the device. |
| 1.3.6.1.4.1.10.2.1.3.4.2.2.1.3 | ColumnnscDxGlProfDevEntOnOff | read-write | mandatory | Profile device online or offline. |
| 1.3.6.1.4.1.10.2.1.3.4.3 | TablenscDxGlDevStatusTable | not-accessible | mandatory | List of Device Status entries. |
| 1.3.6.1.4.1.10.2.1.3.4.3.1 | RownscDxGlDevStatusEntry | not-accessible | mandatory | Device status entry. |
| 1.3.6.1.4.1.10.2.1.3.4.3.1.1 | ColumnnscDxGlDevStatusEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.3.1.2 | ColumnnscDxGlDevStatusEntDeviceNum | read-only | mandatory | The device number. |
| 1.3.6.1.4.1.10.2.1.3.4.3.1.3 | ColumnnscDxGlDevStatusEntHostDevAddr | read-only | mandatory | The HCI device address. |
| 1.3.6.1.4.1.10.2.1.3.4.3.1.4 | ColumnnscDxGlDevStatusEntRmtDevAddr | read-only | mandatory | The remote device address. |
| 1.3.6.1.4.1.10.2.1.3.4.3.1.5 | ColumnnscDxGlDevStatusEntOnOffState | read-only | mandatory | Specifies if the device is online, offline, or marked offline. |
| 1.3.6.1.4.1.10.2.1.3.4.3.1.6 | ColumnnscDxGlDevStatusEntReservedState | read-only | mandatory | Specifies if the device is reserved by this HCI. |
| 1.3.6.1.4.1.10.2.1.3.4.4 | TablenscDxGlSesStatsTable | not-accessible | mandatory | List of Session statistics entries. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1 | RownscDxGlSesStatsEntry | not-accessible | mandatory | Session statistics entry. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.1 | ColumnnscDxGlSesStatsEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.2 | ColumnnscDxGlSesStatsEntInControlReqs | read-only | mandatory | The number of control request packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.3 | ColumnnscDxGlSesStatsEntInControlResps | read-only | mandatory | The number of control response packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.4 | ColumnnscDxGlSesStatsEntInDevAvailResps | read-only | mandatory | The number of device available response packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.5 | ColumnnscDxGlSesStatsEntInDevStatResps | read-only | mandatory | The number of device status response packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.6 | ColumnnscDxGlSesStatsEntInInitReqs | read-only | mandatory | The number of init request packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.7 | ColumnnscDxGlSesStatsEntInInitResps | read-only | mandatory | The number of init response packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.8 | ColumnnscDxGlSesStatsEntInReserveReqs | read-only | mandatory | The number of reserve request packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.9 | ColumnnscDxGlSesStatsEntInReserveResps | read-only | mandatory | The number of reserve response packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.10 | ColumnnscDxGlSesStatsEntInSenseReqs | read-only | mandatory | The number of sense request packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.11 | ColumnnscDxGlSesStatsEntInSenseResps | read-only | mandatory | The number of sense response packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.12 | ColumnnscDxGlSesStatsEntInUnreserveReqs | read-only | mandatory | The number of unreserve request packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.13 | ColumnnscDxGlSesStatsEntInInvalids | read-only | mandatory | The number of invalid packets received by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.14 | ColumnnscDxGlSesStatsEntOutControlReqs | read-only | mandatory | The number of control request packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.15 | ColumnnscDxGlSesStatsEntOutControlResps | read-only | mandatory | The number of control response packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.16 | ColumnnscDxGlSesStatsEntOutDevAvailResps | read-only | mandatory | The number of device available response packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.17 | ColumnnscDxGlSesStatsEntOutDevStatResps | read-only | mandatory | The number of device status response packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.18 | ColumnnscDxGlSesStatsEntOutInitReqs | read-only | mandatory | The number of init request packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.19 | ColumnnscDxGlSesStatsEntOutInitResps | read-only | mandatory | The number of init response packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.20 | ColumnnscDxGlSesStatsEntOutReserveReqs | read-only | mandatory | The number of reserve request packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.21 | ColumnnscDxGlSesStatsEntOutReserveResps | read-only | mandatory | The number of reserve response packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.22 | ColumnnscDxGlSesStatsEntOutSenseReqs | read-only | mandatory | The number of sense request packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.23 | ColumnnscDxGlSesStatsEntOutSenseResps | read-only | mandatory | The number of sense response packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.24 | ColumnnscDxGlSesStatsEntOutUnreserveReqs | read-only | mandatory | The number of unreserve request packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.25 | ColumnnscDxGlSesStatsEntOutInvalids | read-only | mandatory | The number of invalid packets sent by session. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.26 | ColumnnscDxGlSesStatsEntHciState | read-only | mandatory | The state of the HCI. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.27 | ColumnnscDxGlSesStatsEntRciState | read-only | mandatory | The state of the RCI. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.28 | ColumnnscDxGlSesStatsEntHciMaxSessions | read-only | mandatory | Maximum number of HCIs that can be connected to the RCI. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.29 | ColumnnscDxGlSesStatsEntRciMaxSessions | read-only | mandatory | Maximum number of remote interfaces that can be connected to the HCI. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.30 | ColumnnscDxGlSesStatsEntRciPollStatus | read-only | mandatory | This indicates whether automatic device polling is active. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.31 | ColumnnscDxGlSesStatsEntRciPollRequests | read-only | mandatory | Poll request count. |
| 1.3.6.1.4.1.10.2.1.3.4.4.1.32 | ColumnnscDxGlSesStatsEntRciPollDevice | read-only | mandatory | Poll device number. |
| 1.3.6.1.4.1.10.2.1.3.4.5 | TablenscDxGlSesHciConnTable | not-accessible | mandatory | List of session connection entries. |
| 1.3.6.1.4.1.10.2.1.3.4.5.1 | RownscDxGlSesHciConnEntry | not-accessible | mandatory | Session connection entry. |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.1 | ColumnnscDxGlSesHciConnEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.2 | ColumnnscDxGlSesHciConnEntSesNum | read-only | mandatory | The session number. |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.3 | ColumnnscDxGlSesHciConnEntIpAddress | read-only | mandatory | The IP address of the remote RCI/HCI. |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.4 | ColumnnscDxGlSesHciConnEntStatus | read-only | mandatory | Session status. In normal operations it will be open |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.5 | ColumnnscDxGlSesHciConnEntSendState | read-only | mandatory | The current state of the outbound data stream. |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.6 | ColumnnscDxGlSesHciConnEntRecvState | read-only | mandatory | The current state of the inbound data stream. |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.7 | ColumnnscDxGlSesHciConnEntAddr | read-only | mandatory | The local address of the device currently receiving data from the connected HCI. |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.8 | ColumnnscDxGlSesHciConnEntFlags | read-only | mandatory | Session flag information. This is represented by an array of flags, with each flag represented by one hex digit which will have the value of one (on) or zero (… |
| 1.3.6.1.4.1.10.2.1.3.4.5.1.9 | ColumnnscDxGlSesHciConnEntReconn | read-only | mandatory | The amount of time in seconds between reconnects. It is only valid if status is closed. |
| 1.3.6.1.4.1.10.2.1.3.4.6 | TablenscDxGlSesRciConnTable | not-accessible | mandatory | List of session connection entries. |
| 1.3.6.1.4.1.10.2.1.3.4.6.1 | RownscDxGlSesRciConnEntry | not-accessible | mandatory | Session connection entry. |
| 1.3.6.1.4.1.10.2.1.3.4.6.1.1 | ColumnnscDxGlSesRciConnEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.6.1.2 | ColumnnscDxGlSesRciConnEntSesNum | read-only | mandatory | The session number. |
| 1.3.6.1.4.1.10.2.1.3.4.6.1.3 | ColumnnscDxGlSesRciConnEntIpAddress | read-only | mandatory | The IP address of the remote HCI. |
| 1.3.6.1.4.1.10.2.1.3.4.6.1.4 | ColumnnscDxGlSesRciConnEntStatus | read-only | mandatory | Session status. In normal operations it will be open |
| 1.3.6.1.4.1.10.2.1.3.4.6.1.5 | ColumnnscDxGlSesRciConnEntSendState | read-only | mandatory | The current state of the outbound data stream. |
| 1.3.6.1.4.1.10.2.1.3.4.6.1.6 | ColumnnscDxGlSesRciConnEntRecvState | read-only | mandatory | The current state of the inbound data stream. |
| 1.3.6.1.4.1.10.2.1.3.4.6.1.7 | ColumnnscDxGlSesRciConnEntAddr | read-only | mandatory | The local address of the device currently receiving data from this RCI. |
| 1.3.6.1.4.1.10.2.1.3.4.6.1.8 | ColumnnscDxGlSesRciConnEntFlags | read-only | mandatory | Session flag information. This is represented by an array of flags, with each flag represented by one hex digit which will have the value of one (on) or zero (… |
| 1.3.6.1.4.1.10.2.1.3.4.7 | TablenscDxGlSesDevTable | not-accessible | mandatory | List of session device entries. |
| 1.3.6.1.4.1.10.2.1.3.4.7.1 | RownscDxGlSesDevEntry | not-accessible | mandatory | Session device entry. |
| 1.3.6.1.4.1.10.2.1.3.4.7.1.1 | ColumnnscDxGlSesDevEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.7.1.2 | ColumnnscDxGlSesDevEntDevice | read-only | mandatory | The device address. |
| 1.3.6.1.4.1.10.2.1.3.4.7.1.3 | ColumnnscDxGlSesDevEntReserve | read-only | mandatory | The session number of the HCI that has reserved the device. This value will -1 if the device is not currently reserved. |
| 1.3.6.1.4.1.10.2.1.3.4.7.1.4 | ColumnnscDxGlSesDevEntPrimed | read-only | mandatory | Bit map with each bit representing an HCI that is waiting for the device to become unreserved. The right most bit corresponds to HCI 0. |
| 1.3.6.1.4.1.10.2.1.3.4.7.1.5 | ColumnnscDxGlSesDevEntStat | read-only | mandatory | The status of the device, as given in the following: 0x80 - device is offline 0x40 - device in online but does not respond 0-7 - number of sense bytes |
| 1.3.6.1.4.1.10.2.1.3.4.7.1.6 | ColumnnscDxGlSesDevEntSenseData | read-only | mandatory | The sense bytes. |
| 1.3.6.1.4.1.10.2.1.3.4.8 | TablenscDxGlXportStatsTable | not-accessible | mandatory | List of transport statistics entries. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1 | RownscDxGlXportStatsEntry | not-accessible | mandatory | Transport statistics entry. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.1 | ColumnnscDxGlXportStatsEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.2 | ColumnnscDxGlXportStatsEntInAcks | read-only | mandatory | The number of ack packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.3 | ColumnnscDxGlXportStatsEntInConnects | read-only | mandatory | The number of connect packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.4 | ColumnnscDxGlXportStatsEntInDataDups | read-only | mandatory | The number of data dup packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.5 | ColumnnscDxGlXportStatsEntInDataInOrders | read-only | mandatory | The number of data in order packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.6 | ColumnnscDxGlXportStatsEntInDataInvalids | read-only | mandatory | The number of data invalid packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.7 | ColumnnscDxGlXportStatsEntInDataInWindows | read-only | mandatory | The number of data in window packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.8 | ColumnnscDxGlXportStatsEntInDiscs | read-only | mandatory | The number of disconnect packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.9 | ColumnnscDxGlXportStatsEntInNacks | read-only | mandatory | The number of nack packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.10 | ColumnnscDxGlXportStatsEntInProbes | read-only | mandatory | The number of probe packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.11 | ColumnnscDxGlXportStatsEntInProbeResps | read-only | mandatory | The number of probe response packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.12 | ColumnnscDxGlXportStatsEntBadPckts | read-only | mandatory | The number of bad packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.13 | ColumnnscDxGlXportStatsEntBadXcbs | read-only | mandatory | The number of bad xcb packets received by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.14 | ColumnnscDxGlXportStatsEntOutAcks | read-only | mandatory | The number of ack packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.15 | ColumnnscDxGlXportStatsEntOutConnects | read-only | mandatory | The number of connect packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.16 | ColumnnscDxGlXportStatsEntOutDatas | read-only | mandatory | The number of data packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.17 | ColumnnscDxGlXportStatsEntOutDiscs | read-only | mandatory | The number of disconnect packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.18 | ColumnnscDxGlXportStatsEntOutNacks | read-only | mandatory | The number of nack packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.19 | ColumnnscDxGlXportStatsEntOutProbes | read-only | mandatory | The number of probe packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.20 | ColumnnscDxGlXportStatsEntOutProbeResps | read-only | mandatory | The number of probe response packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.21 | ColumnnscDxGlXportStatsEntReconns | read-only | mandatory | The number of reconnect packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.22 | ColumnnscDxGlXportStatsEntRetransmits | read-only | mandatory | The number of retransmit packets sent by transport. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.23 | ColumnnscDxGlXportStatsEntBadChecksums | read-only | mandatory | The number of bad checksum errors. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.24 | ColumnnscDxGlXportStatsEntBadVersions | read-only | mandatory | The number of bad version errors. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.25 | ColumnnscDxGlXportStatsEntConnTimeouts | read-only | mandatory | The number of connect timeout errors. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.26 | ColumnnscDxGlXportStatsEntInitXcbExists | read-only | mandatory | The number of xcb exists errors. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.27 | ColumnnscDxGlXportStatsEntNoHdrSpaces | read-only | mandatory | The number of no header space errors. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.28 | ColumnnscDxGlXportStatsEntNoMemorys | read-only | mandatory | The number of no memory errors. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.29 | ColumnnscDxGlXportStatsEntNoPes | read-only | mandatory | The number of no pe errors. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.30 | ColumnnscDxGlXportStatsEntOutOfSeqDatas | read-only | mandatory | The number of out of sequence data errors. |
| 1.3.6.1.4.1.10.2.1.3.4.8.1.31 | ColumnnscDxGlXportStatsEntShortPackets | read-only | mandatory | The number of short packets errors. |
| 1.3.6.1.4.1.10.2.1.3.4.9 | TablenscDxGlXportConnTable | not-accessible | mandatory | List of transport connection entries. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1 | RownscDxGlXportConnEntry | not-accessible | mandatory | Transport connection entry. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.1 | ColumnnscDxGlXportConnEntKeyId | read-only | mandatory | Processor Key ID (KID). This is a unique value for each interface. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.2 | ColumnnscDxGlXportConnEntNum | read-only | mandatory | The transport connection number. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.3 | ColumnnscDxGlXportConnEntLocalAddress | read-only | mandatory | The local IP address. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.4 | ColumnnscDxGlXportConnEntLocalPort | read-only | mandatory | The local transport port number. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.5 | ColumnnscDxGlXportConnEntRemoteAddress | read-only | mandatory | The remote IP address. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.6 | ColumnnscDxGlXportConnEntRemotePort | read-only | mandatory | The remote transport port number. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.7 | ColumnnscDxGlXportConnEntXopt | read-only | mandatory | Xport option information. This is represented by an array of flags, with each flag represented by one hex digit which will have the value of one (on) or zero (… |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.8 | ColumnnscDxGlXportConnEntWindowSize | read-only | mandatory | Window size specified as a packet count, 8, 16, 32, 64, 128, or 256 |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.9 | ColumnnscDxGlXportConnEntRoundTripTime | read-only | mandatory | Round trip time in milliseconds. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.10 | ColumnnscDxGlXportConnEntSeqNumber | read-only | mandatory | Sequence number. |
| 1.3.6.1.4.1.10.2.1.3.4.9.1.11 | ColumnnscDxGlXportConnEntXcbFlags | read-only | mandatory | Xport flag information. This is represented by an array of flags, with each flag represented by one hex digit which will have the value of one (on) or zero (of… |