NSCHippiSonet-MIB
62 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10.2.1.5.1 | ScalarnscHippiSonetEngineStatus | read-only | mandatory | String describing the current state of the engine. |
| 1.3.6.1.4.1.10.2.1.5.2 | NodenscHippiSonetRegisters | |||
| 1.3.6.1.4.1.10.2.1.5.2.1 | NodenscHippiSonetUnframer | |||
| 1.3.6.1.4.1.10.2.1.5.2.1.1 | ScalarnscHippiSonetUnframerStatus | read-only | mandatory | Unframer status register. |
| 1.3.6.1.4.1.10.2.1.5.2.1.2 | ScalarnscHippiSonetUnframerOHdma | read-only | mandatory | Unframer overhead DMA register. |
| 1.3.6.1.4.1.10.2.1.5.2.2 | NodenscHippiSonetFramer | |||
| 1.3.6.1.4.1.10.2.1.5.2.2.1 | ScalarnscHippiSonetFramerStatus | read-only | mandatory | Framer status register. |
| 1.3.6.1.4.1.10.2.1.5.2.2.2 | ScalarnscHippiSonetFramerAdaptID | read-only | mandatory | Adaptor ID (HDA) and enable status. |
| 1.3.6.1.4.1.10.2.1.5.2.2.3 | ScalarnscHippiSonetFramerInput | read-only | mandatory | Framer input register. |
| 1.3.6.1.4.1.10.2.1.5.2.2.4 | ScalarnscHippiSonetFramerData | read-only | mandatory | Framer data register. |
| 1.3.6.1.4.1.10.2.1.5.2.2.5 | ScalarnscHippiSonetFramerIField | read-only | mandatory | Framer I-Field register. |
| 1.3.6.1.4.1.10.2.1.5.2.3 | NodenscHippiSonetMegaFifo | |||
| 1.3.6.1.4.1.10.2.1.5.2.3.1 | ScalarnscHippiSonetMFcontrol | read-only | mandatory | Mega FIFO control register. |
| 1.3.6.1.4.1.10.2.1.5.2.3.2 | ScalarnscHippiSonetMFstatus | read-only | mandatory | Mega FIFO status register. |
| 1.3.6.1.4.1.10.2.1.5.2.3.3 | ScalarnscHippiSonetMFtimeout | read-only | mandatory | Mega FIFO timeout register. |
| 1.3.6.1.4.1.10.2.1.5.2.3.4 | ScalarnscHippiSonetMFConnectStatus | read-only | mandatory | Mega FIFO connection status register. |
| 1.3.6.1.4.1.10.2.1.5.3 | NodenscHippiSonetMonitor | |||
| 1.3.6.1.4.1.10.2.1.5.3.1 | ScalarnscHippiSonetMonClock | read-only | mandatory | 500 Khz clock value (for time stamps). |
| 1.3.6.1.4.1.10.2.1.5.3.2 | ScalarnscHippiSonetMonMFFlowControl | read-only | mandatory | Mega FIFO flow control duration. |
| 1.3.6.1.4.1.10.2.1.5.3.3 | ScalarnscHippiSonetMonDLFlowControl | read-only | mandatory | Down line flow control duration |
| 1.3.6.1.4.1.10.2.1.5.3.4 | ScalarnscHippiSonetMonBIPErrors | read-only | mandatory | Received path BIP Errors. |
| 1.3.6.1.4.1.10.2.1.5.3.5 | ScalarnscHippiSonetMonSrcBusy | read-only | mandatory | Duration in 500Khz that the source was busy. |
| 1.3.6.1.4.1.10.2.1.5.3.6 | ScalarnscHippiSonetMonSrcSOC | read-only | mandatory | Number of source start of connections |
| 1.3.6.1.4.1.10.2.1.5.3.7 | ScalarnscHippiSonetMonSrcEOC | read-only | mandatory | Number of source end of connections |
| 1.3.6.1.4.1.10.2.1.5.3.8 | ScalarnscHippiSonetMonDstConnectDuration | read-only | mandatory | Number 500Khz cycles destination has been connected |
| 1.3.6.1.4.1.10.2.1.5.3.9 | ScalarnscHippiSonetMonSrcConnectDuration | read-only | mandatory | Number 500Khz cycles source has been connected |
| 1.3.6.1.4.1.10.2.1.5.3.10 | ScalarnscHippiSonetMonDstConnectReject | read-only | mandatory | Number of Destination connect rejects. |
| 1.3.6.1.4.1.10.2.1.5.3.11 | ScalarnscHippiSonetMonSrcConnectFail | read-only | mandatory | Number of source connect failures. |
| 1.3.6.1.4.1.10.2.1.5.3.12 | ScalarnscHippiSonetMonLOF | read-only | mandatory | Number of receive sonet Loss of Frame events |
| 1.3.6.1.4.1.10.2.1.5.3.13 | ScalarnscHippiSonetMonLOS | read-only | mandatory | Number of receive sonet Loss of Signal events |
| 1.3.6.1.4.1.10.2.1.5.3.14 | ScalarnscHippiSonetMonDstBursts | read-only | mandatory | Number of Destination bursts |
| 1.3.6.1.4.1.10.2.1.5.3.15 | ScalarnscHippiSonetMonDstPackets | read-only | mandatory | Number of Destination packets |
| 1.3.6.1.4.1.10.2.1.5.3.16 | ScalarnscHippiSonetMonDstSync | read-only | mandatory | Number of Destination sync errors |
| 1.3.6.1.4.1.10.2.1.5.3.17 | ScalarnscHippiSonetMonDstLLRC | read-only | mandatory | Number of Destination LLRC errors |
| 1.3.6.1.4.1.10.2.1.5.3.18 | ScalarnscHippiSonetMonDstPE | read-only | mandatory | Number of Destination Parity Errors |
| 1.3.6.1.4.1.10.2.1.5.3.19 | ScalarnscHippiSonetMonDstConnect | read-only | mandatory | Number of Destination connects |
| 1.3.6.1.4.1.10.2.1.5.3.20 | ScalarnscHippiSonetMonSrcConnect | read-only | mandatory | Number of source connects |
| 1.3.6.1.4.1.10.2.1.5.3.21 | ScalarnscHippiSonetMonSrcPackets | read-only | mandatory | Number of source packets |
| 1.3.6.1.4.1.10.2.1.5.3.22 | ScalarnscHippiSonetMonSrcBursts | read-only | mandatory | Number of source bursts |
| 1.3.6.1.4.1.10.2.1.5.3.23 | ScalarnscHippiSonetMonSrcForceErrors | read-only | mandatory | Number of Source Bad-data Force Errors |
| 1.3.6.1.4.1.10.2.1.5.3.24 | ScalarnscHippiSonetMonSrcCRC | read-only | mandatory | Number of Source CRC errors |
| 1.3.6.1.4.1.10.2.1.5.3.25 | ScalarnscHippiSonetMonDstWords | read-only | mandatory | Number of Destination burst words / 32 (Kbits) |
| 1.3.6.1.4.1.10.2.1.5.3.26 | ScalarnscHippiSonetMonSrcWords | read-only | mandatory | Number of Destination burst words / 32 (Kbits) |
| 1.3.6.1.4.1.10.2.1.5.4 | NodenscHippiSonetAtoD | |||
| 1.3.6.1.4.1.10.2.1.5.4.1 | ScalarnscHippiSonetADRecvOpticalPower | read-only | mandatory | Receive optical power in dbm's |
| 1.3.6.1.4.1.10.2.1.5.4.2 | ScalarnscHippiSonetADLaserBias | read-only | mandatory | Laser bias voltage (in milli-volts) |
| 1.3.6.1.4.1.10.2.1.5.4.3 | ScalarnscHippiSonetADLaserBackface | read-only | mandatory | Laser backface voltage (in milli-volts) |
| 1.3.6.1.4.1.10.2.1.5.4.4 | ScalarnscHippiSonetADInternalTemp | read-only | mandatory | Internal temperature (degrees F) |
| 1.3.6.1.4.1.10.2.1.5.4.5 | ScalarnscHippiSonetADExhaustTemp | read-only | mandatory | Exhaust temperature (degrees F) |
| 1.3.6.1.4.1.10.2.1.5.5 | ScalarnscHippiSonetSourceIField | read-only | mandatory | Hippi source I-Field register. |
| 1.3.6.1.4.1.10.2.1.5.6 | NodenscHippiSonetProfile | |||
| 1.3.6.1.4.1.10.2.1.5.6.1 | ScalarnscHippiSonetOpticalRcvOffset | read-only | mandatory | String representation of the floating value for the offset of the optical receive light formula. |
| 1.3.6.1.4.1.10.2.1.5.6.2 | ScalarnscHippiSonetOpticalRcvSlope | read-only | mandatory | String representation of the floating value for the slope of the optical receive light formula. |
| 1.3.6.1.4.1.10.2.1.5.6.3 | ScalarnscHippiSonetBiasCurrent | read-only | mandatory | Integer representation of the floating value for the baseline current of the transmit laser in milliamps. This value is used by the machine to determine the li… |
| 1.3.6.1.4.1.10.2.1.5.6.4 | ScalarnscHippiSonetBiasTemp | read-only | mandatory | Temperature in celcius at which the profiled bias current was taken. This value is used with the bias current to determine the life of the laser. |
| 1.3.6.1.4.1.10.2.1.5.6.5 | ScalarnscHippiSonetBackfaceVoltage | read-only | mandatory | String representation of the floting value of the Voltage in millivolts that was measured at the backface of the laser when it was new. This value is used with… |
| 1.3.6.1.4.1.10.2.1.5.6.6 | ScalarnscHippiSonetIField | read-write | mandatory | The I-Field address that is used by the hippi interface. |
| 1.3.6.1.4.1.10.2.1.5.6.7 | ScalarnscHippiSonetBootPort | read-write | mandatory | Which rs232 port the boot information should be sent to. Ports 1 & 2 are the only valid ports with 1 being located on the back of the machine and 2 on the fron… |
| 1.3.6.1.4.1.10.2.1.5.6.8 | ScalarnscHippiSonetPortSpeed | read-write | mandatory | The baud rate to set the rs232 ports to at boot time. |
| 1.3.6.1.4.1.10.2.1.5.6.9 | ScalarnscHippiSonetThreshold | read-write | mandatory | Threshold of the mega-fifo at which flow control will be activated. The value represents 8ths of the fifo with 7 representing the fifo must be full before flow… |
| 1.3.6.1.4.1.10.2.1.5.6.10 | ScalarnscHippiTimeout | read-write | mandatory | Timeout value to use when trying to connect from our hippi source. This timer is started when the source raises connect. If the destination fails to respond be… |
| 1.3.6.1.4.1.10.2.1.5.6.11 | ScalarnscHippiSonetDipSwitch | read-write | mandatory | This is a software switch that functions much like a hardware dip switch. At the moment, the only use of this switch is to define whether the unit will act as … |