NSCPS32-MIB
77 objects
No module-level DESCRIPTION found.
Imported Objects
| NSC-MIB | -- SNMP Party MIB nsc nscProducts |
| RFC1155-SMI | Counter enterprises experimental Gauge IpAddress OBJECT-TYPE TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| RFC1353-MIB | Party |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10.2.1.4 | NodenscHippiSwitch | |||
| 1.3.6.1.4.1.10.2.1.4.1 | Nodeps32General | |||
| 1.3.6.1.4.1.10.2.1.4.1.1 | Scalarps32SwitchDescr | read-only | mandatory | A description of the NSC HIPPI switch. |
| 1.3.6.1.4.1.10.2.1.4.1.2 | Scalarps32SwitchVersion | read-only | mandatory | A textual description of the version/revision level for the switch's software. |
| 1.3.6.1.4.1.10.2.1.4.1.3 | Scalarps32SwitchDate | read-write | mandatory | The current date as kept in the real time clock in the NVRAM chip on the switch board. |
| 1.3.6.1.4.1.10.2.1.4.1.4 | Scalarps32SwitchTime | read-write | mandatory | The current date as kept in the real time clock in the NVRAM chip on the switch board. |
| 1.3.6.1.4.1.10.2.1.4.1.5 | Scalarps32SwitchAdminStatus | read-write | mandatory | Provides the administratively desired state of the NSC Hippi Switch. The switch is activated by writing a value of enable(2). The switch may be de-activated by… |
| 1.3.6.1.4.1.10.2.1.4.1.6 | Scalarps32SwitchOperStatus | read-only | mandatory | Provides operational status of the switch. The following are possible definitions of the values. The exact definition of the values is implementation specific.… |
| 1.3.6.1.4.1.10.2.1.4.1.7 | Scalarps32SwitchPhysicalChanges | read-only | mandatory | The number of physical changes that have occurred in the chassis since the agent was warm/cold started. This includes additions and removal of modules and enti… |
| 1.3.6.1.4.1.10.2.1.4.1.8 | Scalarps32SwitchDiagnosticReg | read-only | mandatory | The register on the NSC Hippi Switch Control Board that contains many items of information on the configuration and performance of the switch. |
| 1.3.6.1.4.1.10.2.1.4.1.9 | Scalarps32SwitchMiscellanReg | read-only | mandatory | The register on the NSC Hippi Switch Control Board that contains many items of miscellaneous data with respect to the switch. |
| 1.3.6.1.4.1.10.2.1.4.1.10 | Scalarps32SwitchDipSwitchReg | read-only | mandatory | The register on the NSC Hippi Switch Control Board that contains the dip switch settings and other sensory information. |
| 1.3.6.1.4.1.10.2.1.4.2 | Nodeps32PowerSupply | |||
| 1.3.6.1.4.1.10.2.1.4.2.1 | Scalarps32NumPowerSupplies | read-only | mandatory | Number of power supplies installed in this chassis. |
| 1.3.6.1.4.1.10.2.1.4.2.2 | Tableps32PowerSupplyTable | not-accessible | mandatory | A list of power supply entries, one for each power supply in the NSC Hippi Switch. |
| 1.3.6.1.4.1.10.2.1.4.2.2.1 | Rowps32PowerSupplyEntry | not-accessible | mandatory | Values for a power supply. |
| 1.3.6.1.4.1.10.2.1.4.2.2.1.1 | Columnps32PowerSupplyIndex | read-only | mandatory | An index value that uniquely identifies a power supply installed in the NSC Hippi Switch. |
| 1.3.6.1.4.1.10.2.1.4.2.2.1.2 | Columnps32PowerSupplyDescr | read-only | mandatory | A textual description of the power supply, including the vendor's name and version. |
| 1.3.6.1.4.1.10.2.1.4.2.2.1.3 | Columnps32PowerSupplyAdminStatus | read-write | mandatory | Desired status of the power supply. |
| 1.3.6.1.4.1.10.2.1.4.2.2.1.4 | Columnps32PowerSupplyOperStatus | read-only | mandatory | Actual status of the power supply: - unknown(1) - status not known. - empty(2) - no power supply installed in slot - disabled(3) - unable to supply power - con… |
| 1.3.6.1.4.1.10.2.1.4.2.2.1.5 | Columnps32PowerSupplyHealthText | read-only | mandatory | A textual description of the power supply's operational status. Agents may use this string to provide detailed information on current failures, including how t… |
| 1.3.6.1.4.1.10.2.1.4.2.2.1.6 | Columnps32PowerSupplyWarnings | read-only | mandatory | The number of times ps32PowerSupplyOperStatus has gone to warning(5). |
| 1.3.6.1.4.1.10.2.1.4.2.2.1.7 | Columnps32PowerSupplyFailures | read-only | mandatory | The number of times ps32PowerSupplyOperStatus has gone to bad(4). |
| 1.3.6.1.4.1.10.2.1.4.2.3 | Scalarps32NumPowerOutputs | read-only | mandatory | Number of power supply outputs (total) in the switch. |
| 1.3.6.1.4.1.10.2.1.4.2.4 | Tableps32PowerOutputTable | not-accessible | mandatory | A list of power supply output entries, one for each output of each power supply in the chassis. |
| 1.3.6.1.4.1.10.2.1.4.2.4.1 | Rowps32PowerOutputEntry | not-accessible | mandatory | Values for a power supply output. |
| 1.3.6.1.4.1.10.2.1.4.2.4.1.1 | Columnps32PowerOutputIndex | read-only | mandatory | An index value that uniquely identifies an output for the power supply. |
| 1.3.6.1.4.1.10.2.1.4.2.4.1.2 | Columnps32PowerOutputStatus | read-only | mandatory | Actual status of the power supply: - unknown(1) status not known - bad(2) unable to supply power due to failure - warning(3) supplying power but marginally - g… |
| 1.3.6.1.4.1.10.2.1.4.2.4.1.3 | Columnps32PowerOutputNominalVoltage | read-only | mandatory | In hundredths of a volt, the voltage the output is supposed to supply, such as -5, +5, +12, -15, etc. |
| 1.3.6.1.4.1.10.2.1.4.2.4.1.4 | Columnps32PowerOutputOfferedVoltage | read-only | mandatory | In hundredths of a volt, the voltage actually supplied by the power output. |
| 1.3.6.1.4.1.10.2.1.4.2.4.1.5 | Columnps32PowerOutputWarnings | read-only | mandatory | The number of times ps32PowerOutputStatus has gone to warning(3). |
| 1.3.6.1.4.1.10.2.1.4.2.4.1.6 | Columnps32PowerOutputFailures | read-only | mandatory | The number of times ps32PowerOutputStatus has gone to bad(2). |
| 1.3.6.1.4.1.10.2.1.4.3 | Nodeps32Environ | |||
| 1.3.6.1.4.1.10.2.1.4.3.1 | Scalarps32NumEnvironmentSensors | read-only | mandatory | Number of environment sensors in this chassis. |
| 1.3.6.1.4.1.10.2.1.4.3.2 | Tableps32EnvironTable | not-accessible | mandatory | A list of environmental entries, one for each environmental sensor in the chassis. |
| 1.3.6.1.4.1.10.2.1.4.3.2.1 | Rowps32EnvironEntry | not-accessible | mandatory | Values for an environmental sensor. |
| 1.3.6.1.4.1.10.2.1.4.3.2.1.1 | Columnps32EnvironIndex | read-only | mandatory | Index added to get draft past the MIB compiler. This needs to be fixed by the working group. |
| 1.3.6.1.4.1.10.2.1.4.3.2.1.2 | Columnps32EnvironSensor | read-only | mandatory | The identification of an environmental sensor. Other AutonomousType values may be defined elsewhere, in association with specific protocols. However, this docu… |
| 1.3.6.1.4.1.10.2.1.4.3.2.1.3 | Columnps32EnvironStatus | read-only | mandatory | Actual status indicated by the sensor. It is an implementation specific matter whether the agent keeps entries with status unknown(1) in the table. If unknown(… |
| 1.3.6.1.4.1.10.2.1.4.3.2.1.4 | Columnps32EnvironWarnings | read-only | mandatory | The number of times ps32EnvironStatus has gone to warning(3). |
| 1.3.6.1.4.1.10.2.1.4.3.2.1.5 | Columnps32EnvironFailures | read-only | mandatory | The number of times ps32EnvironStatus has gone to bad(2). |
| 1.3.6.1.4.1.10.2.1.4.3.2.1.6 | Columnps32EnvironDescriptor | read-only | mandatory | A textual description of the environment sensor. |
| 1.3.6.1.4.1.10.2.1.4.3.2.1.7 | Columnps32EnvironHealthText | read-only | mandatory | A textual description of the current status of the environment entity monitored by this sensor. |
| 1.3.6.1.4.1.10.2.1.4.4 | Nodeps32Slot | |||
| 1.3.6.1.4.1.10.2.1.4.4.1 | Scalarps32NumSlots | read-only | mandatory | Number of slots in this chassis. |
| 1.3.6.1.4.1.10.2.1.4.4.2 | Tableps32SlotTable | not-accessible | mandatory | A densely populated table that can be used to access individual slots in a HIPPI switch. |
| 1.3.6.1.4.1.10.2.1.4.4.2.1 | Rowps32SlotEntry | not-accessible | mandatory | An individual hippi switch slot entry consisting of all information required to monitor the status of a given slot in the Hippi Switch. |
| 1.3.6.1.4.1.10.2.1.4.4.2.1.1 | Columnps32SlotNumber | read-only | mandatory | The slot number in the switch. Slot numbers are officially designated as 0 through 18 in the switch but each slot number is incremented in order to comply with… |
| 1.3.6.1.4.1.10.2.1.4.4.2.1.2 | Columnps32SlotPartNumber | read-only | mandatory | The part number of the board residing in the slot. |
| 1.3.6.1.4.1.10.2.1.4.4.2.1.3 | Columnps32SlotBoardID | read-only | mandatory | The identifier of the board residing in the slot. |
| 1.3.6.1.4.1.10.2.1.4.4.2.1.4 | Columnps32SlotBoardText | read-only | mandatory | A textual description of the board residing in the slot. |
| 1.3.6.1.4.1.10.2.1.4.4.2.1.5 | Columnps32SlotLastChange | read-only | mandatory | The value of MIB-II's sysUpTime (in the agent supporting this chassis MIB) at which a module was last inserted or removed from this slot. If no module has been… |
| 1.3.6.1.4.1.10.2.1.4.5 | Nodeps32Port | |||
| 1.3.6.1.4.1.10.2.1.4.5.1 | Scalarps32MaximumPorts | read-only | mandatory | Maximum number of ports in this chassis. |
| 1.3.6.1.4.1.10.2.1.4.5.2 | Scalarps32InstalledPorts | read-only | mandatory | Number of ports actually installed in this chassis. |
| 1.3.6.1.4.1.10.2.1.4.5.3 | Tableps32PortTable | not-accessible | mandatory | A densely populated table that can be used to access individual ports in a HIPPI switch. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1 | Rowps32PortEntry | not-accessible | mandatory | An individual hippi switch port entry. A switch port contains input and output hippi device pointers. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.1 | Columnps32PortNumber | read-only | mandatory | The number of the hippi port. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.2 | Columnps32PortBoard | read-only | mandatory | The object identifier points to the PS32SlotEntry for the board to allow users to locate information about the board this port is located on. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.3 | Columnps32PortInput | read-only | mandatory | The object identifier points to the hippiEntry for the HIPPI input device associated with this port. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.4 | Columnps32PortOutput | read-only | mandatory | The object identifier points to the hippiEntry for the HIPPI output device associated with this port. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.5 | Columnps32PortForce | read-write | mandatory | This object displays the forced pathway that is associated with this port. If none is assigned then the object has the value of -1. Only one output port is all… |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.6 | Columnps32PortCounterStatus | read-write | mandatory | This object consists of a bit for each counter that may have been overrun. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.7 | Columnps32PortOverrunCount | read-write | mandatory | This object counts the overruns detected for this HIPPI port. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.8 | Columnps32PortSwitchRejectCount | read-write | mandatory | This object consists of a bit for each counter that may have been overrun. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.9 | Columnps32PortCamponDelayCount | read-write | mandatory | This object counts the rejected connect attempts using the Campon option. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.10 | Columnps32PortCurrentStatus | read-only | mandatory | This object consists of the status register at the instant of the last successful connection. |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.11 | Columnps32PortAdminStatus | read-write | mandatory | This object allows various commands to be issued from the client and acted upon by the agent. The only commands supported currently are listed below. 1: unknow… |
| 1.3.6.1.4.1.10.2.1.4.5.3.1.12 | Columnps32PortOperStatus | read-only | mandatory | This object displays the actual status of the port as determined by current registers and other indi- cators. 1: unknown not a supported status. 2: notinstalle… |
| 1.3.6.1.4.1.10.2.1.4.6 | Nodeps32Pathway | |||
| 1.3.6.1.4.1.10.2.1.4.6.1 | Scalarps32MaximumPathways | read-only | mandatory | Maximum number of pathways for a single port. |
| 1.3.6.1.4.1.10.2.1.4.6.2 | Tableps32PathwayTable | not-accessible | mandatory | A sparsely populated table that can be used to determine pathway information for a given port. |
| 1.3.6.1.4.1.10.2.1.4.6.2.1 | Rowps32PathwayEntry | not-accessible | mandatory | An individual hippi switch pathway entry. |
| 1.3.6.1.4.1.10.2.1.4.6.2.1.1 | Columnps32PathwayPortNumber | read-only | mandatory | Index into the pathway entry table. |
| 1.3.6.1.4.1.10.2.1.4.6.2.1.2 | Columnps32PathwayHDA | read-only | mandatory | The downline HIPPI Destination Address to which the HIPPI connection is routed. This address is a 3 character hexadecimal address, packed into two octets. |
| 1.3.6.1.4.1.10.2.1.4.6.2.1.3 | Columnps32PathwayDest | read-write | mandatory | This is a list of output port numbers that can supply a path or a portion of the path to the specified HDA. The number of output ports and the number of ports … |
| 1.3.6.1.4.1.10.2.1.4.6.2.1.4 | Columnps32PathwayClear | read-write | mandatory | A command to clear the requested pathway entry. The value is not used. Any access of this function causes the pathway indicated by the indices to be cleared. |