NSNICMIB-MIB
252 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.23 | Nodehpnsa | |||
| 1.3.6.1.4.1.11.2.23.18 | NodenicObject | |||
| 1.3.6.1.4.1.11.2.23.18.1 | NodenicDrvConfig | |||
| 1.3.6.1.4.1.11.2.23.18.1.1 | TablenicDrvConfigTable | not-accessible | mandatory | A list of Driver Configuration Information |
| 1.3.6.1.4.1.11.2.23.18.1.1.1 | RownicDrvConfigEntry | not-accessible | mandatory | Driver Configuration Information Table Entry. |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.1 | ColumnnicDrvConfigIndex | read-only | mandatory | Index into Driver Configuration Information Table. |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.2 | ColumnnicDrvcfgName | read-only | mandatory | Driver Name. Never Changes |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.3 | ColumnnicDrvcfgDescript | read-only | mandatory | Driver description, does not change |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.4 | ColumnnicDrvcfgType | read-only | mandatory | Type of NIC |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.5 | ColumnnicDrvcfgPhyAddr | read-only | mandatory | Address at the protocol layer immediately below the network layer |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.6 | ColumnnicDrvcfgMajor | read-only | mandatory | The major revision level of the driver |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.7 | ColumnnicDrvcfgMinor | read-only | mandatory | The minor revision level of the driver |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.8 | ColumnnicDrvcfgSlot | read-only | mandatory | Slot where the board is installed (EISA only) |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.9 | ColumnnicDrvcfgIOport0 | read-only | mandatory | Primary Base IO port |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.10 | ColumnnicDrvcfgIOport1 | read-only | mandatory | Secondary Base IO port |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.11 | ColumnnicDrvcfgInterrupt0 | read-only | mandatory | The Primary IRQ number/interrupt vector |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.12 | ColumnnicDrvcfgInterrupt1 | read-only | mandatory | The Secondary IRQ number/interrupt vector |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.13 | ColumnnicDrvcfgDMA0 | read-only | mandatory | The Primary DMA channel if applicable |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.14 | ColumnnicDrvcfgDMA1 | read-only | mandatory | The Secondary DMA channel if applicable |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.15 | ColumnnicDrvcfgMemory0 | read-only | mandatory | Memory Mapped Address 0 if applicable |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.16 | ColumnnicDrvcfgMemory1 | read-only | mandatory | Memory Mapped Address 1 if applicable |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.17 | ColumnnicDrvcfgMulticast | read-only | mandatory | Whether driver supports multicast addressing |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.18 | ColumnnicDrvcfgPromiscuous | read-only | mandatory | Whether driver is in promiscuous mode |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.19 | ColumnnicDrvcfgMaximumSize | read-only | mandatory | This is the ECB's maximum buffer size |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.20 | ColumnnicDrvcfgSpeed | read-only | mandatory | Driver transmission speed in Mbits |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.21 | ColumnnicDrvcfgTransportTime | read-only | mandatory | Time(in ticks) to transmit a 576-byte packet |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.22 | ColumnnicDrvcfgSendRetries | read-only | mandatory | Number of retries for transmission before abort |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.23 | ColumnnicDrvcfgMode | read-only | mandatory | Mode of transmission, 100VG enabled or disabled |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.24 | ColumnnicDrvcfgBindFrames | read-only | mandatory | Number of Frames types bound to this Driver |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.25 | ColumnnicDrvcfgAftGroupId | read-only | mandatory | Adavanced Fault Tolerance(AFT) Group Id bound to this Adapter |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.26 | ColumnnicDrvcfgAftBusNo | read-only | mandatory | PCI Bus Number bound to this Adapter |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.27 | ColumnnicDrvcfgAftBusDeviceId | read-only | mandatory | PCI Bus Device Id bound to this Adapter |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.28 | ColumnnicDrvcfgAftPciVenodrId | read-only | mandatory | PCI Vendor Id bound to this Adapter |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.29 | ColumnnicDrvcfgAftPciDeviceId | read-only | mandatory | PCI Device Id bound to this Driver |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.30 | ColumnnicDrvcfgAftPciSubSysVendorId | read-only | mandatory | PCI Subsystem Vendor Id bound to this Adapter |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.31 | ColumnnicDrvcfgAftPciSubSysDeviceId | read-only | mandatory | PCI Subsystem Device Id bound to this Adapter |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.32 | ColumnnicDrvcfgAftStatus | read-only | mandatory | Adavanced Fault Tolerance(AFT) Status(Standby, Active or Failed) bound to this Adapter |
| 1.3.6.1.4.1.11.2.23.18.1.1.1.33 | ColumnnicDrvcfgAftMode | read-only | mandatory | Adavanced Fault Tolerance(AFT) Mode (Primary or Secondary) bound this Adapter |
| 1.3.6.1.4.1.11.2.23.18.2 | NodenicStatistics | |||
| 1.3.6.1.4.1.11.2.23.18.2.1 | TablenicStatisticsTable | not-accessible | mandatory | A List of Driver Generic Statistics |
| 1.3.6.1.4.1.11.2.23.18.2.1.1 | RownicStatisticsEntry | not-accessible | mandatory | An entry in the Generic Statistics Table. |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.1 | ColumnnicStatisticsIndex | read-only | mandatory | Index into the Generic Statistics Table. |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.2 | ColumnnicTtlTxPacket | read-only | mandatory | Number of packets transmitted successfully |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.3 | ColumnnicDeltaTtlTxPacket | read-only | mandatory | Number of packets transmitted Between last read and current time |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.4 | ColumnnicTtlRxPacket | read-only | mandatory | Number of packets received successfully |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.5 | ColumnnicDeltaTtlRxPacket | read-only | mandatory | Number of packets received between last update and current time |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.6 | ColumnnicGetECBFails | read-only | mandatory | Number of times an ECB request failed |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.7 | ColumnnicTxTooBig | read-only | mandatory | Number of packets that are too big for transmission |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.8 | ColumnnicRxTooBig | read-only | mandatory | Number of packets that are too big for receive buffer |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.9 | ColumnnicRxOverflow | read-only | mandatory | Number of missed packets |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.10 | ColumnnicTxMisc | read-only | mandatory | Number of packets with fatal transmission errors that are not accounted for anywhere else |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.11 | ColumnnicRxMisc | read-only | mandatory | Number of packets with fatal receive errors that are not accounted for anywhere else |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.12 | ColumnnicRxCRC | read-only | mandatory | Number of packets received with corrupt data |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.13 | ColumnnicTxOKByte | read-only | mandatory | Number of bytes transmitted successfully |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.14 | ColumnnicDeltaTxOKByte | read-only | mandatory | Number of bytes transmitted between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.15 | ColumnnicRxOKByte | read-only | mandatory | Number of bytes received successfully |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.16 | ColumnnicDeltaRxOKByte | read-only | mandatory | Number of bytes received between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.17 | ColumnnicTxGroup | read-only | mandatory | Number of packets transmitted with group addressing |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.18 | ColumnnicDeltaTxGroup | read-only | mandatory | Number of packets transmitted with group addressing between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.19 | ColumnnicRxGroup | read-only | mandatory | Number of packets received with group addressing |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.20 | ColumnnicDeltaRxGroup | read-only | mandatory | Number of packets received with group addressing between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.21 | ColumnnicAdapterReset | read-only | mandatory | Number of times the adapter reset due to internal errors |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.22 | ColumnnicQDepth | read-only | mandatory | Number of transmit ECBs queued for the adapter |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.23 | ColumnnicRcvBuffers | read-only | mandatory | Number of LSL receive buffers |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.24 | ColumnnicRcvBuffers75Pct | read-only | mandatory | Number of LSL receive buffers that must be in use before buffers are regarded as getting low |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.25 | ColumnnicRcvBuffersCkOut | read-only | mandatory | Number of buffers in use |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.26 | ColumnnicRcvBuffersMaxSize | read-only | mandatory | Size of data portion of the ECB in bytes |
| 1.3.6.1.4.1.11.2.23.18.2.1.1.27 | ColumnnicNumCustCounter | read-only | mandatory | Number of Driver Custom Counters |
| 1.3.6.1.4.1.11.2.23.18.3 | NodenicCustomStats | |||
| 1.3.6.1.4.1.11.2.23.18.3.1 | TablenicCustStatTable | not-accessible | mandatory | A list of Driver Custom Statistics |
| 1.3.6.1.4.1.11.2.23.18.3.1.1 | RownicCustEntry | not-accessible | mandatory | An entry in the driver custom statistic table |
| 1.3.6.1.4.1.11.2.23.18.3.1.1.1 | ColumnnicCustIndex | read-only | mandatory | Index of list of lan adapters. |
| 1.3.6.1.4.1.11.2.23.18.3.1.1.2 | ColumnnicIndex | read-only | mandatory | Index into the list of driver custom statistics table |
| 1.3.6.1.4.1.11.2.23.18.3.1.1.3 | ColumnnicCustCounter | read-only | mandatory | The counter for a custom statistic |
| 1.3.6.1.4.1.11.2.23.18.3.1.1.4 | ColumnnicCustCounterString | read-only | mandatory | Name of the custom counter |
| 1.3.6.1.4.1.11.2.23.18.4 | NodenicErrors | |||
| 1.3.6.1.4.1.11.2.23.18.4.1 | TablenicErrorsTable | not-accessible | mandatory | A list of Driver Error Statistics. |
| 1.3.6.1.4.1.11.2.23.18.4.1.1 | RownicErrorsEntry | not-accessible | mandatory | an entry in the driver errors statistics table. |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.1 | ColumnnicErrorsIndex | read-only | mandatory | Index into the error statistics Table. |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.2 | ColumnnicTxOKSingleCollision | read-only | mandatory | Number of frames involved in a single collision that are subsequently transmitted successfully |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.3 | ColumnnicTxOKMultipleCollision | read-only | mandatory | Number of frames involved in more than one collision that are subsequently transmitted successfully |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.4 | ColumnnicTxOKDeferred | read-only | mandatory | Number of frames whose transmission was delayed on the first attempt because media was busy |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.5 | ColumnnicTxAbortLateCollision | read-only | mandatory | Number of collisions detected later than 512 bit times into the tranmitted packet |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.6 | ColumnnicTxAbortExcessCollision | read-only | mandatory | Number of frames not transmitted successfully due to excessive collision |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.7 | ColumnnicTxAbortCarrierSense | read-only | mandatory | Number of times the carrierSense variable was not asserted or was deasserted during transmission of a frame without collision |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.8 | ColumnnicTxAbortExcessiveDeferral | read-only | mandatory | Number of frames deferred for an excessive period of time |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.9 | ColumnnicRxAbortFrameAlignment | read-only | mandatory | Number of frames that are not an integral number of octets in length and do not pass the FCS check |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.10 | ColumnnicHWRxMismatch | read-only | mandatory | Number of packets received that did not pass the length consistency checks |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.11 | ColumnnicTtlTxErrPacket | read-only | mandatory | Total Number of packets with transmission errors |
| 1.3.6.1.4.1.11.2.23.18.4.1.1.12 | ColumnnicTtlRxErrPacket | read-only | mandatory | Total Number of packets with receive errors |
| 1.3.6.1.4.1.11.2.23.18.5 | NodenicMiscellaneous | |||
| 1.3.6.1.4.1.11.2.23.18.5.1 | ScalarnicNumBoards | read-only | mandatory | Total number of adapters installed in the system |
| 1.3.6.1.4.1.11.2.23.18.5.2 | ScalarnicAdapterType | read-only | mandatory | Type of adapter that the user is currently looking at |
| 1.3.6.1.4.1.11.2.23.18.6 | NodenicFrameType | |||
| 1.3.6.1.4.1.11.2.23.18.6.1 | TablenicFrameTypeTable | not-accessible | mandatory | A list of Frame Types supported by the Driver |
| 1.3.6.1.4.1.11.2.23.18.6.1.1 | RownicFrameTypeEntry | not-accessible | mandatory | An entry in the driver Frame Type table |
| 1.3.6.1.4.1.11.2.23.18.6.1.1.1 | ColumnnicFrameTypeIndex | read-only | mandatory | Index into a list of supported frame types. |
| 1.3.6.1.4.1.11.2.23.18.6.1.1.2 | ColumnnicCardIndex | read-only | mandatory | Index of list of lan adapters. |
| 1.3.6.1.4.1.11.2.23.18.6.1.1.3 | ColumnnicFrameTypeString | read-only | mandatory | Name of the frame type such as Ethernet-802.2 |
| 1.3.6.1.4.1.11.2.23.18.7 | NodenicParms | |||
| 1.3.6.1.4.1.11.2.23.18.7.1 | NodenicCommonParms | |||
| 1.3.6.1.4.1.11.2.23.18.7.1.1 | ScalarnicParmSampling | read-write | mandatory | User configurable data sampling time, default once per 5 seconds |
| 1.3.6.1.4.1.11.2.23.18.7.1.2 | ScalarnicParmProcessing | read-write | mandatory | User configurable data processing time, default once per minute |
| 1.3.6.1.4.1.11.2.23.18.7.1.3 | ScalarnicParmRxErrCount | read-write | mandatory | User configurable threshold for receive errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.4 | ScalarnicParmRxErrDelta | read-write | mandatory | User configurable threshold for receive errors between last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.5 | ScalarnicParmRxErrPct | read-write | mandatory | User configurable threshold for receive errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.6 | ScalarnicParmTxErrCount | read-write | mandatory | User configurable threshold for transmit errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.7 | ScalarnicParmTxErrDelta | read-write | mandatory | User configurable threshold for transmit errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.8 | ScalarnicParmTxErrPct | read-write | mandatory | User configurable threshold for transmit errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.9 | ScalarnicParmAdapterResetCount | read-write | mandatory | User configurable threshold for Adapter Reset errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.10 | ScalarnicParmAdapterResetDelta | read-write | mandatory | User configurable threshold for Adapter Reset errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.11 | ScalarnicParmAdapterResetPct | read-write | mandatory | User configurable threshold for Adapter Reset errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.12 | ScalarnicParmAlignmentCount | read-write | mandatory | User configurable threshold for Alignment errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.13 | ScalarnicParmAlignmentDelta | read-write | mandatory | User configurable threshold for Alignment errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.14 | ScalarnicParmAlignmentPct | read-write | mandatory | User configurable threshold for Alignment errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.15 | ScalarnicParmFrameTooLongCount | read-write | mandatory | User configurable threshold for Frame Too Long errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.16 | ScalarnicParmFrameTooLongDelta | read-write | mandatory | User configurable threshold for Frame Too Long errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.17 | ScalarnicParmFrameTooLongPct | read-write | mandatory | User configurable threshold for Frame Too Long errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.18 | ScalarnicParmHardwareMismatchCount | read-write | mandatory | User configurable threshold for Hardware Mismatch errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.19 | ScalarnicParmHardwareMismatchDelta | read-write | mandatory | User configurable threshold for Hardware Mismatch errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.20 | ScalarnicParmHardwareMismatchPct | read-write | mandatory | User configurable threshold for Hardware Mismatch errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.21 | ScalarnicParmLateCollisionCount | read-write | mandatory | User configurable threshold for Late Collision errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.22 | ScalarnicParmLateCollisionDelta | read-write | mandatory | User configurable threshold for Late Collision errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.23 | ScalarnicParmLateCollisionPct | read-write | mandatory | User configurable threshold for Late Collision errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.24 | ScalarnicParmExcessCollisionCount | read-write | mandatory | User configurable threshold for Excessive Collision errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.25 | ScalarnicParmExcessCollisionDelta | read-write | mandatory | User configurable threshold for Excessive Collision errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.26 | ScalarnicParmExcessCollisionPct | read-write | mandatory | User configurable threshold for Excess Collision errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.27 | ScalarnicParmCarrierSenseCount | read-write | mandatory | User configurable threshold for Carrier Sense errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.28 | ScalarnicParmCarrierSenseDelta | read-write | mandatory | User configurable threshold for Carrier Sense errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.29 | ScalarnicParmCarrierSensePct | read-write | mandatory | User configurable threshold for Carrier Sense errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.30 | ScalarnicParmDeferralCount | read-write | mandatory | User configurable threshold for Deferral errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.31 | ScalarnicParmDeferralDelta | read-write | mandatory | User configurable threshold for Deferral errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.32 | ScalarnicParmDeferralPct | read-write | mandatory | User configurable threshold for Deferral errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.33 | ScalarnicParmNoECBCount | read-write | mandatory | User configurable threshold for Deferral errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.34 | ScalarnicParmNoECBDelta | read-write | mandatory | User configurable threshold for Deferral errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.35 | ScalarnicParmNoECBPct | read-write | mandatory | User configurable threshold for Deferral errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.36 | ScalarnicParmRxOverflowCount | read-write | mandatory | User configurable threshold for Deferral errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.37 | ScalarnicParmRxOverflowDelta | read-write | mandatory | User configurable threshold for Deferral errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.38 | ScalarnicParmRxOverflowPct | read-write | mandatory | User configurable threshold for Deferral errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.39 | ScalarnicParmUtilizationCount | read-write | mandatory | User configurable threshold for packets or bytes/second utilization |
| 1.3.6.1.4.1.11.2.23.18.7.1.40 | ScalarnicParmAdapterType | read-write | mandatory | User selected Adapter Type, will generate an alarm if there is a mismatch |
| 1.3.6.1.4.1.11.2.23.18.7.1.41 | ScalarnicParmLineErrCount | read-write | mandatory | User configurable threshold for Token Ring Line errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.42 | ScalarnicParmLineErrDelta | read-write | mandatory | User configurable threshold for Token Ring Line errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.43 | ScalarnicParmLineErrPct | read-write | mandatory | User configurable threshold for Token Ring Line errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.44 | ScalarnicParmLostFramesCount | read-write | mandatory | User configurable threshold for Token Ring Lost Frames |
| 1.3.6.1.4.1.11.2.23.18.7.1.45 | ScalarnicParmLostFramesDelta | read-write | mandatory | User configurable threshold for Token Ring Lost Frames between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.46 | ScalarnicParmLostFramesPct | read-write | mandatory | User configurable threshold for Token Ring Lost Frames, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.47 | ScalarnicParmBurstErrCount | read-write | mandatory | User configurable threshold for Token Ring Burst errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.48 | ScalarnicParmBurstErrDelta | read-write | mandatory | User configurable threshold for Token Ring Burst errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.49 | ScalarnicParmBurstErrPct | read-write | mandatory | User configurable threshold for Token Ring Burst errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.50 | ScalarnicParmACErrCount | read-write | mandatory | User configurable threshold for Token Ring A/C errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.51 | ScalarnicParmACErrDelta | read-write | mandatory | User configurable threshold for Token Ring A/C errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.52 | ScalarnicParmACErrPct | read-write | mandatory | User configurable threshold for Token Ring A/C errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.53 | ScalarnicParmAbortDelimitersCount | read-write | mandatory | User configurable threshold for Token Ring Abort Delimiters |
| 1.3.6.1.4.1.11.2.23.18.7.1.54 | ScalarnicParmAbortDelimitersDelta | read-write | mandatory | User configurable threshold for Token Ring Abort Delimiters between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.55 | ScalarnicParmAbortDelimitersPct | read-write | mandatory | User configurable threshold for Token Ring Abort Delimiters, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.56 | ScalarnicParmFrameCopiedErrCount | read-write | mandatory | User configurable threshold for Token Ring Frame Copied errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.57 | ScalarnicParmFrameCopiedErrDelta | read-write | mandatory | User configurable threshold for Token Ring Frame Copied errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.58 | ScalarnicParmFrameCopiedErrPct | read-write | mandatory | User configurable threshold for Token Ring Frame Copied errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.59 | ScalarnicParmFrequencyErrCount | read-write | mandatory | User configurable threshold for Token Ring Frequency errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.60 | ScalarnicParmFrequencyErrDelta | read-write | mandatory | User configurable threshold for Token Ring Frequency errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.61 | ScalarnicParmFrequencyErrPct | read-write | mandatory | User configurable threshold for Token Ring Frequency errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.62 | ScalarnicParmTokenErrCount | read-write | mandatory | User configurable threshold for Token Ring Token errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.63 | ScalarnicParmTokenErrDelta | read-write | mandatory | User configurable threshold for Token Ring Token errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.64 | ScalarnicParmTokenErrPct | read-write | mandatory | User configurable threshold for Token Ring Token errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.65 | ScalarnicParmInternalErrCount | read-write | mandatory | User configurable threshold for Token Ring Internal errors |
| 1.3.6.1.4.1.11.2.23.18.7.1.66 | ScalarnicParmInternalErrDelta | read-write | mandatory | User configurable threshold for Token Ring Internal errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.1.67 | ScalarnicParmInternalErrPct | read-write | mandatory | User configurable threshold for Token Ring Internal errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.1.68 | ScalarnicParmAftFailOverErrCount | read-write | mandatory | The active NIC in a redundant group has failed.The standby NIC has taken over. |
| 1.3.6.1.4.1.11.2.23.18.7.1.69 | ScalarnicParmAftFailOverErrDelta | read-write | mandatory | The active NIC in a redundant group has failed.The standby NIC has taken over. |
| 1.3.6.1.4.1.11.2.23.18.7.1.70 | ScalarnicParmAftRecoveryErrCount | read-write | mandatory | The previously failed NIC in a redundant group has become operational. |
| 1.3.6.1.4.1.11.2.23.18.7.1.71 | ScalarnicParmAftRecoveryErrDelta | read-write | mandatory | The previously failed NIC in a redundant group has become operational. |
| 1.3.6.1.4.1.11.2.23.18.7.1.72 | ScalarnicParmAftStandbyErrCount | read-write | mandatory | The standby NIC in a redundant group has failed. |
| 1.3.6.1.4.1.11.2.23.18.7.1.73 | ScalarnicParmAftStandbyErrDelta | read-write | mandatory | The standby NIC in a redundant group has failed. |
| 1.3.6.1.4.1.11.2.23.18.7.1.74 | ScalarnicParmAftGruoupFailErrCount | read-write | mandatory | All NICs (active and standby) in a redundant group have failed. |
| 1.3.6.1.4.1.11.2.23.18.7.1.75 | ScalarnicParmAftGroupFailErrDelta | read-write | mandatory | All NICs (active and standby) in a redundant group have failed. |
| 1.3.6.1.4.1.11.2.23.18.7.2 | NodenicStarfighterParms | |||
| 1.3.6.1.4.1.11.2.23.18.7.2.1 | ScalarnicStarfighterParmTxFifoCount | read-write | mandatory | User configurable threshold for transmit FIFO underrun errors |
| 1.3.6.1.4.1.11.2.23.18.7.2.2 | ScalarnicStarfighterParmTxFifoDelta | read-write | mandatory | User configurable threshold for transmit FIFO underrun errors between last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.2.3 | ScalarnicStarfighterParmTxFifoPct | read-write | mandatory | User configurable threshold for transmit FIFO underrun errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.2.4 | ScalarnicStarfighterParmTxTimedOutCount | read-write | mandatory | User configurable threshold for transmit timed out |
| 1.3.6.1.4.1.11.2.23.18.7.2.5 | ScalarnicStarfighterParmTxTimedOutDelta | read-write | mandatory | User configurable threshold for transmit timed out |
| 1.3.6.1.4.1.11.2.23.18.7.2.6 | ScalarnicStarfighterParmTxTimedOutPct | read-write | mandatory | User configurable threshold for transmit timed out, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.2.7 | ScalarnicStarfighterParmRxFifoCount | read-write | mandatory | User configurable threshold for receive FIFO overrun errors |
| 1.3.6.1.4.1.11.2.23.18.7.2.8 | ScalarnicStarfighterParmRxFifoDelta | read-write | mandatory | User configurable threshold for receive FIFO overrun errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.2.9 | ScalarnicStarfighterParmRxFifoPct | read-write | mandatory | User configurable threshold for receive FIFO overrun errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.2.10 | ScalarnicStarfighterParmRxFalseInterruptCount | read-write | mandatory | User configurable threshold for receiver false interrupts |
| 1.3.6.1.4.1.11.2.23.18.7.2.11 | ScalarnicStarfighterParmRxFalseInterruptDelta | read-write | mandatory | User configurable threshold for receiver false interrupts between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.2.12 | ScalarnicStarfighterParmRxFalseInterruptPct | read-write | mandatory | User configurable threshold for receive false interrupts, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.2.13 | ScalarnicStarfighterParmRxPagingErrCount | read-write | mandatory | User configurable threshold for receive paging errors |
| 1.3.6.1.4.1.11.2.23.18.7.2.14 | ScalarnicStarfighterParmRxPagingErrDelta | read-write | mandatory | User configurable threshold for receive paging errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.2.15 | ScalarnicStarfighterParmRxPagingErrPct | read-write | mandatory | User configurable threshold for receive paging errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.3 | NodenicTwisterParms | |||
| 1.3.6.1.4.1.11.2.23.18.7.3.1 | ScalarnicTwisterParmTxFifoCount | read-write | mandatory | User configurable threshold for transmit FIFO underrun errors |
| 1.3.6.1.4.1.11.2.23.18.7.3.2 | ScalarnicTwisterParmTxFifoDelta | read-write | mandatory | User configurable threshold for transmit FIFO underrun errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.3.3 | ScalarnicTwisterParmTxFifoPct | read-write | mandatory | User configurable threshold for transmit FIFO underrun errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.3.4 | ScalarnicTwisterParmTxTimedOutCount | read-write | mandatory | User configurable threshold for transmit timed out |
| 1.3.6.1.4.1.11.2.23.18.7.3.5 | ScalarnicTwisterParmTxTimedOutDelta | read-write | mandatory | User configurable threshold for transmit timed out between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.3.6 | ScalarnicTwisterParmTxTimedOutPct | read-write | mandatory | User configurable threshold for transmit timed out, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.3.7 | ScalarnicTwisterParmRxFifoCount | read-write | mandatory | User configurable threshold for receive FIFO overrun errors |
| 1.3.6.1.4.1.11.2.23.18.7.3.8 | ScalarnicTwisterParmRxFifoDelta | read-write | mandatory | User configurable threshold for receive FIFO overrun errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.3.9 | ScalarnicTwisterParmRxFifoPct | read-write | mandatory | User configurable threshold for receive FIFO overrun errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.3.10 | ScalarnicTwisterParmRxFalseInterruptCount | read-write | mandatory | User configurable threshold for receiver false interrupts |
| 1.3.6.1.4.1.11.2.23.18.7.3.11 | ScalarnicTwisterParmRxFalseInterruptDelta | read-write | mandatory | User configurable threshold for receiver false interrupts between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.3.12 | ScalarnicTwisterParmRxFalseInterruptPct | read-write | mandatory | User configurable threshold for receive false interrupts, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.3.13 | ScalarnicTwisterParmRxPagingErrCount | read-write | mandatory | User configurable threshold for receive paging errors |
| 1.3.6.1.4.1.11.2.23.18.7.3.14 | ScalarnicTwisterParmRxPagingErrDelta | read-write | mandatory | User configurable threshold for receive paging errors between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.3.15 | ScalarnicTwisterParmRxPagingErrPct | read-write | mandatory | User configurable threshold for receive paging errors, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.3.16 | ScalarnicTwisterParmDMATimedOutCount | read-write | mandatory | User configurable threshold for number of times for DMA timed out |
| 1.3.6.1.4.1.11.2.23.18.7.3.17 | ScalarnicTwisterParmDMATimedOutDelta | read-write | mandatory | User configurable threshold for number of times for DMA timed out between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.3.18 | ScalarnicTwisterParmDMATimedOutPct | read-write | mandatory | User configurable threshold for number of times for DMA timed out, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.4 | NodenicMasterParms | |||
| 1.3.6.1.4.1.11.2.23.18.7.4.1 | ScalarnicMasterParmTxNoResourcesCount | read-write | mandatory | User configurable threshold for transmit PDA queue full |
| 1.3.6.1.4.1.11.2.23.18.7.4.2 | ScalarnicMasterParmTxNoResourcesDelta | read-write | mandatory | User configurable threshold for transmit PDA queue full between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.4.3 | ScalarnicMasterParmTxNoResourcesPct | read-write | mandatory | User configurable threshold for transmit PDA queue full, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.4.4 | ScalarnicMasterParmTxExcessFragsCount | read-write | mandatory | User configurable threshold for excessive transmit fragments |
| 1.3.6.1.4.1.11.2.23.18.7.4.5 | ScalarnicMasterParmTxExcessFragsDelta | read-write | mandatory | User configurable threshold for excessive transmit fragments between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.4.6 | ScalarnicMasterParmTxExcessFragsPct | read-write | mandatory | User configurable threshold for excessive transmit fragments, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.4.7 | ScalarnicMasterParmRxLowCount | read-write | mandatory | User configurable threshold for RCBs not allocated |
| 1.3.6.1.4.1.11.2.23.18.7.4.8 | ScalarnicMasterParmRxLowDelta | read-write | mandatory | User configurable threshold for RCBs not allocated between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.4.9 | ScalarnicMasterParmRxLowPct | read-write | mandatory | User configurable threshold for RCBs not allocated, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.4.10 | ScalarnicMasterParmRxEmptyCount | read-write | mandatory | User configurable threshold for no RCBs |
| 1.3.6.1.4.1.11.2.23.18.7.4.11 | ScalarnicMasterParmRxEmptyDelta | read-write | mandatory | User configurable threshold for no RCBs between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.4.12 | ScalarnicMasterParmRxEmptyPct | read-write | mandatory | User configurable threshold for no RCBs, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.7.5 | NodenicShastaParms | |||
| 1.3.6.1.4.1.11.2.23.18.7.5.1 | ScalarnicShastaParmTxNoResourcesCount | read-write | mandatory | User configurable threshold for transmit PDA queue full |
| 1.3.6.1.4.1.11.2.23.18.7.5.2 | ScalarnicShastaParmTxNoResourcesDelta | read-write | mandatory | User configurable threshold for transmit PDA queue full between the last update and current time |
| 1.3.6.1.4.1.11.2.23.18.7.5.3 | ScalarnicShastaParmTxNoResourcesPct | read-write | mandatory | User configurable threshold for transmit PDA queue full, this is a relative count |
| 1.3.6.1.4.1.11.2.23.18.8 | NodenicTokenRingStatistics | |||
| 1.3.6.1.4.1.11.2.23.18.8.1 | TablenicTokenRingStatisticsTable | not-accessible | mandatory | A list of Token Ring statistics supported by the Driver |
| 1.3.6.1.4.1.11.2.23.18.8.1.1 | RownicTokenRingStatisticsEntry | not-accessible | mandatory | An entry in the Token Ring statistics table |
| 1.3.6.1.4.1.11.2.23.18.8.1.1.1 | ColumnnicTokenRingStatisticsIndex | read-only | mandatory | Index into a list of Token Ring Statistics. |
| 1.3.6.1.4.1.11.2.23.18.8.1.1.2 | ColumnnicFunctionalAddress | read-only | mandatory | The Token Ring functional address enabled for packet reception. |
| 1.3.6.1.4.1.11.2.23.18.8.1.1.3 | ColumnnicGroupAddress | read-only | mandatory | The Token Ring group address enabled for packet reception. |
| 1.3.6.1.4.1.11.2.23.18.8.1.1.4 | ColumnnicLastOpenStatus | read-only | mandatory | The last Token Ring NdisOpenAdapter error status. If the last open succeeded, this value will be zero. |
| 1.3.6.1.4.1.11.2.23.18.8.1.1.5 | ColumnnicRingStatus | read-only | mandatory | The current Token Ring ring status. |
| 1.3.6.1.4.1.11.2.23.18.8.1.1.6 | ColumnnicRingState | read-only | mandatory | The Token Ring state of the driver with respect to entering the ring.. |
| 1.3.6.1.4.1.11.2.23.18.9 | NodenicTokenRingErrors | |||
| 1.3.6.1.4.1.11.2.23.18.9.1 | TablenicTokenRingErrorsTable | not-accessible | mandatory | A list of Token Ring errors supported by the Driver |
| 1.3.6.1.4.1.11.2.23.18.9.1.1 | RownicTokenRingErrorsEntry | not-accessible | mandatory | An entry in the Token Ring errors table |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.1 | ColumnnicTokenRingErrorsIndex | read-only | mandatory | Index into a list of Token Ring Errors. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.2 | ColumnnicLineErrors | read-only | mandatory | The number of Token Ring frames with an invalid FCS or a code violation. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.3 | ColumnnicLostFrames | read-only | mandatory | The number of Token Ring frames transmitted that have not circled the ring within the maximum ring latency. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.4 | ColumnnicBurstErrors | read-only | mandatory | The number of Token Ring frames containing five half bits with no transition. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.5 | ColumnnicACErrors | read-only | mandatory | The number of Token Ring frames with A/C errors. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.6 | ColumnnicAbortDelimiters | read-only | mandatory | The number of Token Ring abort delimiters transmitted. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.7 | ColumnnicFrameCopiedErrors | read-only | mandatory | The number of Token Ring frames addressed to this card that another card on the ring has also copied. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.8 | ColumnnicFrequencyErrors | read-only | mandatory | The number of Token Ring frequency errors on the ring. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.9 | ColumnnicTokenErrors | read-only | mandatory | The number of times the card has been the active Token Ring monitor and has had to recreate. |
| 1.3.6.1.4.1.11.2.23.18.9.1.1.10 | ColumnnicInternalErrors | read-only | mandatory | The number of Token Ring internal errors the card has detected. |