Netrake-MIB
764 objects
nCite MIB
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Counter64 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.10950 | Identitynetrake | nCite MIB | ||
| 1.3.6.1.4.1.10950.1 | Nodeproducts | |||
| 1.3.6.1.4.1.10950.1.1 | NodenCite | |||
| 1.3.6.1.4.1.10950.1.1.1 | Nodechassis | |||
| 1.3.6.1.4.1.10950.1.1.1.1 | NodechasGen | |||
| 1.3.6.1.4.1.10950.1.1.1.1.1 | ScalarchasSerNum | read-only | current | Serial number of the chassis |
| 1.3.6.1.4.1.10950.1.1.1.1.2 | ScalarchasLedStatus | read-only | current | Bit array that contains the chassis LED status |
| 1.3.6.1.4.1.10950.1.1.1.1.3 | ScalarchasPOSTMode | read-write | current | Used to set the mode of the power on self test; Currently not supported. |
| 1.3.6.1.4.1.10950.1.1.1.1.4 | ScalarchasType | read-only | current | Description |
| 1.3.6.1.4.1.10950.1.1.1.2 | NodechasPwr | |||
| 1.3.6.1.4.1.10950.1.1.1.2.1 | TablechasPwrSupplyTable | not-accessible | current | Table of power supplies |
| 1.3.6.1.4.1.10950.1.1.1.2.1.1 | RowchasPwrSupplyEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.1.2.1.1.1 | ColumnchasPwrSupplyIndex | read-only | current | Index to the power supply table |
| 1.3.6.1.4.1.10950.1.1.1.2.1.1.2 | ColumnchasPwrSupplyOperStatus | read-only | current | Column Description |
| 1.3.6.1.4.1.10950.1.1.1.2.1.1.3 | ColumnchasPwrSupplyDesc | read-only | current | Description of power supply |
| 1.3.6.1.4.1.10950.1.1.1.2.2 | NotificationchasPwrTrap | current | This trap is sent whenever the status of a power supply changes | |
| 1.3.6.1.4.1.10950.1.1.1.2.3 | ScalarchasPwrTrapAck | read-write | current | Chase power trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.1.2.4 | ScalarchasPwrTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.1.3 | NodechasFan | |||
| 1.3.6.1.4.1.10950.1.1.1.3.1 | TablechasFanTable | not-accessible | current | Table contains the list of fans |
| 1.3.6.1.4.1.10950.1.1.1.3.1.1 | RowchasFanEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.1.3.1.1.1 | ColumnchasFanIndex | read-only | current | Column Description |
| 1.3.6.1.4.1.10950.1.1.1.3.1.1.2 | ColumnchasFanOperStatus | read-only | current | Operational status of the fan |
| 1.3.6.1.4.1.10950.1.1.1.3.1.1.3 | ColumnchasFanDescription | read-only | current | Description of fan |
| 1.3.6.1.4.1.10950.1.1.1.3.2 | NotificationchasFanTrap | current | This trap is sent whenever the status of a fan changes | |
| 1.3.6.1.4.1.10950.1.1.1.3.3 | ScalarchasFanTrapAck | read-write | current | Chase fan trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.1.3.4 | ScalarchasFanTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.1.4 | NodechasBrd | |||
| 1.3.6.1.4.1.10950.1.1.1.4.1 | TablechasBrdTable | not-accessible | current | Table containing the description of each board present in the chassis |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1 | RowchasBrdEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.1 | ColumnchasBrdSlotNum | read-only | current | Starting slot number of the board |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.2 | ColumnchasBrdDescription | read-only | current | Description of the board |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.3 | ColumnchasBrdType | read-only | current | Board type |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.4 | ColumnchasBrdOccSlots | read-only | current | Number of slots that the board occupies |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.5 | ColumnchasBrdMaxPorts | read-only | current | Number of ports that the card supports |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.6 | ColumnchasBrdSlotLabel | read-only | current | Label on the chassis |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.7 | ColumnchasBrdStatusLeds | read-only | current | Bit-map that contains the value of the front panel LEDS. |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.8 | ColumnchasBrdState | read-only | current | Board state |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.9 | ColumnchasBrdPwr | read-write | current | Is used to power on and off line cards and indicates power state of board |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.10 | ColumnchasBrdIfIndex | read-only | current | This is the value of the index to the IF table of the first port of the line card |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.11 | ColumnchasBrdSerialNum | read-only | current | Serial number of the board |
| 1.3.6.1.4.1.10950.1.1.1.4.1.1.12 | ColumnchasBrdReset | read-write | current | This OID is set when the nCite is commanded to perform a board reset |
| 1.3.6.1.4.1.10950.1.1.1.4.2 | NotificationchasBrdStateChangeTrap | current | This trap is sent when the state of line card changes state | |
| 1.3.6.1.4.1.10950.1.1.1.4.3 | ScalarchasBrdStateChangeTrapAck | read-write | current | Chase board state change trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.1.4.4 | ScalarchasBrdStateChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.2 | NodenCiteSystem | |||
| 1.3.6.1.4.1.10950.1.1.2.1 | TableresourceUsageTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.2.1.1 | RowresourceUsageEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.2.1.1.1 | ColumnprocessorIndex | read-only | current | There are three processors. This table contains the resource usage for each processor |
| 1.3.6.1.4.1.10950.1.1.2.1.1.2 | ColumnmemTotal | read-only | current | Total amount of memory available. |
| 1.3.6.1.4.1.10950.1.1.2.1.1.3 | ColumnmemUsed | read-only | current | This is the percentage of memory in use at the time that the value is requested. |
| 1.3.6.1.4.1.10950.1.1.2.1.1.4 | ColumncpuUsage | read-only | current | This is the amount of CPU in use at the time this value is requested. |
| 1.3.6.1.4.1.10950.1.1.2.2 | ScalarsystemSoftwareVersion | read-only | current | Software Version of the nCite |
| 1.3.6.1.4.1.10950.1.1.2.3 | ScalarsystemRestoreFlag | read-write | deprecated | Tells the EMS whether to push or pull the configuration. If the value is default(0) then the EMS pulls. If the value is restore(1) then the EMS pushes. |
| 1.3.6.1.4.1.10950.1.1.2.4 | ScalarsystemOperState | read-only | current | Operational state of the nCite |
| 1.3.6.1.4.1.10950.1.1.2.5 | ScalarsystemAdminState | read-write | current | Administrative state of the nCite. Disabling the nCite stops all traffic from passing through the box. |
| 1.3.6.1.4.1.10950.1.1.2.6 | NotificationsystemOperStateChangeTrap | current | This trap is sent when the operational state of the nCite changes. | |
| 1.3.6.1.4.1.10950.1.1.2.7 | ScalarsystemOperStateChangeTrapAck | read-write | current | System operation state change trap flag |
| 1.3.6.1.4.1.10950.1.1.2.8 | ScalarsystemOperStateChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.2.9 | TablesystemTrapAckTable | not-accessible | current | Table of SNMP Mgrs that are sending acknowledgements |
| 1.3.6.1.4.1.10950.1.1.2.9.1 | RowsystemTrapAckEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.2.9.1.1 | ColumnsystemSnmpMgrIpAddress | read-only | current | IP address of SNMP Mgr that is sending Acks for traps |
| 1.3.6.1.4.1.10950.1.1.2.9.1.2 | ColumnsystemTrapNoAck | read-write | current | When trap is not acknowledges the value get set to ackNoReceived; EMS will set to OK upon refresh. |
| 1.3.6.1.4.1.10950.1.1.3 | Nodealarm | |||
| 1.3.6.1.4.1.10950.1.1.3.1 | TableactiveAlarmTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.3.1.1 | RowactiveAlarmEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.3.1.1.1 | ColumnactiveAlarmIndex | read-only | current | Index into table for a specific alarm instance can change |
| 1.3.6.1.4.1.10950.1.1.3.1.1.2 | ColumnactiveAlarmId | read-only | current | Unique identifier assigned to aninstance of an alarm. |
| 1.3.6.1.4.1.10950.1.1.3.1.1.3 | ColumnactiveAlarmType | read-only | current | Unique identifier associated with the alarm description |
| 1.3.6.1.4.1.10950.1.1.3.1.1.4 | ColumnactiveAlarmServiceAffecting | read-only | current | Indicates whether the alarm is service affecting |
| 1.3.6.1.4.1.10950.1.1.3.1.1.5 | ColumnactiveAlarmCategory | read-only | current | Categorizes the alarm into a class of alarms |
| 1.3.6.1.4.1.10950.1.1.3.1.1.6 | ColumnactiveAlarmTimeStamp | read-only | current | Date and time that the alarm condition is detected |
| 1.3.6.1.4.1.10950.1.1.3.1.1.7 | ColumnactiveAlarmSlotNum | read-only | current | Slot number of the card that has the condition being alarmed |
| 1.3.6.1.4.1.10950.1.1.3.1.1.8 | ColumnactiveAlarmPortNum | read-only | current | If condition is against a port, this will hold the port number. Otherwise it will be defaulted to 0. |
| 1.3.6.1.4.1.10950.1.1.3.1.1.9 | ColumnactiveAlarmSysUpTime | read-only | current | Value of system up time as reported in MIBII at the time that the condition began |
| 1.3.6.1.4.1.10950.1.1.3.1.1.10 | ColumnactiveAlarmDevType | read-only | current | Description |
| 1.3.6.1.4.1.10950.1.1.3.1.1.11 | ColumnactiveAlarmAdditionalInfo | read-only | current | Additional information to be included in the alarm description |
| 1.3.6.1.4.1.10950.1.1.3.1.1.12 | ColumnactiveAlarmOccurances | read-only | current | Number of times the condition has re-occurred since it was originated |
| 1.3.6.1.4.1.10950.1.1.3.1.1.13 | ColumnacitveAlarmReportingSource | read-only | deprecated | This has been deprecated |
| 1.3.6.1.4.1.10950.1.1.3.1.1.14 | ColumnactiveAlarmSeverity | read-only | current | Severity of the alarm |
| 1.3.6.1.4.1.10950.1.1.3.1.1.15 | ColumnactiveAlarmDisplayString | read-only | current | Description of the alarm to be used to display on the GUI |
| 1.3.6.1.4.1.10950.1.1.3.1.1.16 | ColumnactiveAlarmSubType | read-only | current | Sub-type is used to distinguish alarms by a separate criteria such as customer ID or policy ID |
| 1.3.6.1.4.1.10950.1.1.3.1.1.17 | ColumnactiveAlarmEventFlag | read-only | current | Description |
| 1.3.6.1.4.1.10950.1.1.3.2 | NodehistEvent | |||
| 1.3.6.1.4.1.10950.1.1.3.3 | NotificationpostAlarm | current | This notification is sent when an alarm becomes active | |
| 1.3.6.1.4.1.10950.1.1.3.4 | NodepostEvent | |||
| 1.3.6.1.4.1.10950.1.1.3.5 | ScalaractiveAlarmAcknowledge | read-write | current | Value is set to acknowledged by the EMS when the alarm is received. It is set back to cleared by the agent |
| 1.3.6.1.4.1.10950.1.1.3.6 | ScalaractiveAlarmID | read-write | current | Alarm ID of the alarm being acknowledged |
| 1.3.6.1.4.1.10950.1.1.3.7 | NodeeventAcknowledge | |||
| 1.3.6.1.4.1.10950.1.1.3.8 | ScalareventID | read-write | deprecated | Event ID for the event that is being acknowledged |
| 1.3.6.1.4.1.10950.1.1.3.9 | ScalaractiveAlarmAcknowledgeSource | read-write | current | Identifies the Snmp Manager which sets the alarm ack. |
| 1.3.6.1.4.1.10950.1.1.4 | NodeswitchNotifications | |||
| 1.3.6.1.4.1.10950.1.1.4.1 | ScalarcoldStartTrapEnable | read-write | current | Is used to disable the cold start trap |
| 1.3.6.1.4.1.10950.1.1.4.2 | NotificationcoldStartTrap | current | This trap is sent if trap is enabled when the Management Processor comes up from a cold start | |
| 1.3.6.1.4.1.10950.1.1.4.3 | ScalarcoldStartTrapAck | read-write | current | Cold start trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.4.4 | ScalarcoldStartTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.5 | NodenCiteRedundant | |||
| 1.3.6.1.4.1.10950.1.1.5.1 | ScalarredundantPort1IpAddr | read-write | current | IP address of the redundant port of the nCite MP |
| 1.3.6.1.4.1.10950.1.1.5.2 | ScalarredundantPort2IpAddr | read-write | current | Redundant port 2 IP address for the nCite MP |
| 1.3.6.1.4.1.10950.1.1.5.3 | ScalarredundantAdminState | read-write | current | Administrative state for redundancy. |
| 1.3.6.1.4.1.10950.1.1.5.4 | ScalarredundantMateName | read-write | current | The name of the redundant nCite. This will be the chassis serial number when redundancy is enabled. If redundancy is not configured, then this field will be bl… |
| 1.3.6.1.4.1.10950.1.1.5.6 | ScalarredundantConfigChangeTrapAck | read-write | current | Redundant config change trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.5.7 | NotificationredundantConfigChangeTrap | current | This trap is sent whenever the redundant configuration is modified | |
| 1.3.6.1.4.1.10950.1.1.5.8 | ScalarredundantPort1NetMask | read-write | current | Net mask |
| 1.3.6.1.4.1.10950.1.1.5.9 | ScalarredundantPort2NetMask | read-write | current | Net mask |
| 1.3.6.1.4.1.10950.1.1.5.10 | ScalarredundantFailbackThresh | read-write | current | Failback threshold |
| 1.3.6.1.4.1.10950.1.1.5.11 | ScalarredundantRedirectorFlag | read-write | current | When set to enable(1), the nCite supports load balancing on equal cost routes |
| 1.3.6.1.4.1.10950.1.1.5.12 | NotificationredundantFailbackThreshChangeTrap | current | This trap is sent whenever the failback threshold is modified | |
| 1.3.6.1.4.1.10950.1.1.5.13 | ScalarredundantFailbackThreshChangeTrapAck | read-write | current | This value is set to acknowledge the redundant failback threshold change trap |
| 1.3.6.1.4.1.10950.1.1.5.14 | NotificationredundantRedirectorFlagChangeTrap | current | This trap is sent whenever the redirector flag is changed | |
| 1.3.6.1.4.1.10950.1.1.5.15 | ScalarredundantRedirectorFlagChangeTrapAck | read-write | current | Used to acknowledge the redirector flag change trap |
| 1.3.6.1.4.1.10950.1.1.5.16 | ScalarredundantAutoFailbackFlag | read-write | current | When set to enable(1), the nCite supports automatic failback |
| 1.3.6.1.4.1.10950.1.1.5.17 | NotificationredundantAutoFailbackChangeTrap | current | This trap is sent whenever the automatic failback flag is changed | |
| 1.3.6.1.4.1.10950.1.1.5.18 | ScalarredundantAutoFailbackFlagChangeTrapAck | read-write | current | Used to acknowledge the automatic failback flag change trap |
| 1.3.6.1.4.1.10950.1.1.5.19 | ScalarredundantConfigChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.5.20 | ScalarredundantFailbackThreshChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack flag. |
| 1.3.6.1.4.1.10950.1.1.5.21 | ScalarredundantRedirectorFlagChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.5.22 | ScalarredundantAutoFailbackFlagChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.6 | NodenCiteStats | |||
| 1.3.6.1.4.1.10950.1.1.6.1 | NodeglobalCounters | |||
| 1.3.6.1.4.1.10950.1.1.6.1.1 | ScalartotalPacketsXmitCPA | read-only | current | Total number of packets transmitted by CP side A |
| 1.3.6.1.4.1.10950.1.1.6.1.2 | ScalarnumPacketsDiscardCPA | read-only | current | Number of packets discarded by CP side A |
| 1.3.6.1.4.1.10950.1.1.6.1.3 | ScalartotalPacketsXmitCPB | read-only | current | Total number of packets transmitted by CP side B |
| 1.3.6.1.4.1.10950.1.1.6.1.4 | ScalarnumPacketsDiscardCPB | read-only | current | Number of packets discarded by CP side B |
| 1.3.6.1.4.1.10950.1.1.6.1.5 | ScalartotalPacketsXmit | read-only | current | This counter applies to nCites that do not have 'sides' |
| 1.3.6.1.4.1.10950.1.1.6.1.6 | ScalartotalPacketsDiscard | read-only | current | This counter applies to nCites that do have have 'sides' |
| 1.3.6.1.4.1.10950.1.1.6.2 | NodegigEStats | |||
| 1.3.6.1.4.1.10950.1.1.6.2.1 | TablegigEStatsTable | not-accessible | current | Table containing the counters available for every gigE card in the nCite. |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1 | RowgigEStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.1 | ColumngigEStatsPortIndex | read-only | current | Index to table |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.2 | ColumngigEStatsSlotNum | read-only | current | Slot number of gigE line card that the statistics correspond |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.3 | ColumnlinkStatusChanges | read-only | current | Total number of link status changes |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.4 | ColumnframesRcvdOkCount | read-only | current | Total number of good frames received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.5 | ColumnoctetsRcvdOkCount | read-only | current | Total number of good octets received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.6 | ColumnframesRcvdCount | read-only | current | Total number of frames received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.7 | ColumnoctetsRcvdCount | read-only | current | Total number of octets received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.8 | ColumnframeSeqErrCount | read-only | current | Total number of frame sequence errors |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.9 | ColumnlostFramesMacErrCount | read-only | current | Total number of frames lost due to internal MAX errors |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.10 | ColumnrcvdFrames64Octets | read-only | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.11 | ColumnoctetsRcvd1519toMax | read-only | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.12 | ColumnxmitFrames64Octets | read-only | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.13 | ColumnoctetsXmit1024to1518 | read-only | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.14 | ColumnoctetsXmitCount | read-only | current | Number of octets transmitted on the physical port |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.15 | ColumnunicastFramesXmitOk | read-only | current | Number of unicast frames transmitted OK on the physical port |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.16 | ColumnunicastFramesRcvdOk | read-only | current | Unicast Frames Received OK |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.17 | ColumnbroadcastFramesXmitOk | read-only | current | Broadcast Frames Transmitted OK |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.18 | ColumnbroadcastFramesRcvdOk | read-only | current | Broadcast Frames Received OK |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.19 | ColumnmulticastFramesXmitOk | read-only | current | Multicast Frames tranmistted OK |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.20 | ColumnmulticastFramesRcvdOk | read-only | current | Multicast Frames Received OK |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.21 | ColumnoctetsRcvd65to127 | read-only | current | 65 To 127 Octet Frames Received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.22 | ColumnoctetsXmit65to127 | read-only | current | 128 To 255 Octet Frames Transmitted |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.23 | ColumnoctetRcvd128to255 | read-only | current | 128 To 255 Octet Frames Received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.24 | ColumnoctetsXmit128to255 | read-only | current | 128 To 255 Octet Frames Transmitted |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.25 | ColumnoctetsRcvd256to511 | read-only | current | Description 256 To 511 Octet Frames Received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.26 | ColumnoctetsXmit256to511 | read-only | current | 256 To 511 Octet Frames Transmitted |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.27 | ColumnoctetsRcvd512to1023 | read-only | current | 512 To 1023 Octet Frames Received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.28 | ColumnoctetsXmit512to1023 | read-only | current | 512 To 1023 Octet Frames Transmitted |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.29 | ColumnoctetsRcvd1024to1518 | read-only | current | 1024 To 1518 Octet Frames Received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.30 | ColumnoctetsXmit1519toMax | read-only | current | 1519 To Max Octed Frames Transmitted |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.31 | ColumnunderSizeFramesRcvd | read-only | current | Under Sized Frames Received |
| 1.3.6.1.4.1.10950.1.1.6.2.1.1.32 | ColumnjabbersRcvd | read-only | current | Jabbers Received |
| 1.3.6.1.4.1.10950.1.1.6.3 | NodeserviceStats | |||
| 1.3.6.1.4.1.10950.1.1.6.3.1 | TableserviceStatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1 | RowserviceStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1.1 | ColumnserviceStatsPortIndex | read-only | current | Maps to a physical port on the nCite |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1.2 | ColumnserviceStatsSlotId | read-only | current | Slot number of the line card |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1.3 | ColumnrealTimeTotalPackets | read-only | current | Total number of real time packets processed |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1.4 | ColumnrealTimeDiscardPackets | read-only | current | Number of real time packets discarded |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1.5 | ColumnnrtTotalPackets | read-only | current | Total number of near real time packets processed |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1.6 | ColumnnrtDiscardPackets | read-only | current | Number of near real time packets discarded |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1.7 | ColumnbestEffortTotalPackets | read-only | current | Total number of best effort packets processed |
| 1.3.6.1.4.1.10950.1.1.6.3.1.1.8 | ColumnbestEffortDiscardPackets | read-only | current | Number of best effort packets discarded |
| 1.3.6.1.4.1.10950.1.1.6.4 | NoderedundancyStats | |||
| 1.3.6.1.4.1.10950.1.1.6.4.1 | ScalarredundPairedModeTimeTicks | read-only | current | Number of time ticks spent in duplex mode |
| 1.3.6.1.4.1.10950.1.1.6.4.2 | ScalarredundRecoveryModeTimeTicks | read-only | current | Number of time ticks spent in recovery mode |
| 1.3.6.1.4.1.10950.1.1.6.4.3 | ScalarredundNumRedundLinkFailures | read-only | current | Number of times the out of band link for redundancy has failed |
| 1.3.6.1.4.1.10950.1.1.6.4.4 | ScalarredundActiveMateCalls | read-only | current | Number of flows established flows associated with the mate system |
| 1.3.6.1.4.1.10950.1.1.6.4.5 | ScalarredundActiveMateRegist | read-only | current | Total number of active registrations |
| 1.3.6.1.4.1.10950.1.1.6.5 | NodepolicyStats | |||
| 1.3.6.1.4.1.10950.1.1.6.5.1 | TablepolicyCountersTable | not-accessible | current | Policy statistics. |
| 1.3.6.1.4.1.10950.1.1.6.5.1.1 | RowpolicyCountersEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.5.1.1.1 | ColumnpolicyIndex | read-only | current | This field reflects the policy name. |
| 1.3.6.1.4.1.10950.1.1.6.5.1.1.2 | ColumnpolicyTotalPacketsA | read-only | current | Total number of packets processed for the policy on side A |
| 1.3.6.1.4.1.10950.1.1.6.5.1.1.3 | ColumnpolicyTotalPacketsB | read-only | current | Total number of packets processed for the policy on side B |
| 1.3.6.1.4.1.10950.1.1.6.5.1.1.4 | ColumnpolicyTotalPackets | read-only | current | This field applies to nCites that do not have 'sides' |
| 1.3.6.1.4.1.10950.1.1.6.5.2 | ScalarpolicyStatsReset | read-write | current | Set to reset when the policy configuration is changed |
| 1.3.6.1.4.1.10950.1.1.6.6 | NodesipStats | |||
| 1.3.6.1.4.1.10950.1.1.6.6.1 | ScalarsipStatCallsInitiating | read-only | current | Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.6.2 | ScalarsipStatNonLocalActiveCalls | read-only | deprecated | Real-time stat of calls that are currently in the ACTIVE state that are non-local calls |
| 1.3.6.1.4.1.10950.1.1.6.6.3 | ScalarsipStatLocalActiveCalls | read-only | current | Real-time stat that is the number of active calls that are local |
| 1.3.6.1.4.1.10950.1.1.6.6.4 | ScalarsipStatTermCalls | read-only | current | Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.6.5 | ScalarsipStatPeakActiveCalls | read-only | deprecated | Peak number of active calls since the last nCite reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.6 | ScalarsipStatTotalActiveCalls | read-only | current | Total number of active calls. sipStatLocalActvieCalls + sipStatNonLocalActiveCalls |
| 1.3.6.1.4.1.10950.1.1.6.6.7 | ScalarsipStatCallsCompletedSuccess | read-only | current | Total number of calls that have been completed successfully since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.8 | ScalarsipStatCallsFailed | read-only | current | Total number of calls that completed due to some failure since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.9 | ScalarsipStatCallsAbandoned | read-only | current | Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.10 | ScalarsipStatCallsDropped | read-only | deprecated | Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.11 | ScalarsipStatCallsDegraded | read-only | current | Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.12 | ScalarsipStatAuthFailures | read-only | deprecated | Total number of calls that were rejected because they could not be autenticated against a valid customer definition since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.13 | ScalarsipStatCallMediaTimeouts | read-only | current | Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.14 | ScalarsipStatCallInitTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite… |
| 1.3.6.1.4.1.10950.1.1.6.6.15 | ScalarsipStatTermTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.16 | ScalarsipStatMsgErrs | read-only | deprecated | Total number of times a SIP error message was received since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.6.17 | ScalarsipStatCallsProcessed | read-only | current | Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of sipStatCallsCompletedSuccess, sipStatCallsFailed, sipSt… |
| 1.3.6.1.4.1.10950.1.1.6.6.18 | ScalarsipStatPeakNonLocalCalls | read-only | deprecated | Real-time statistics that is the peak number of non-local active calls. |
| 1.3.6.1.4.1.10950.1.1.6.6.19 | ScalarsipStatPeakLocalCalls | read-only | current | Real-time statistic that is the peak number of active local calls. |
| 1.3.6.1.4.1.10950.1.1.6.6.20 | ScalarsipStatRedirectSuccess | read-only | deprecated | Total number of successful redirects |
| 1.3.6.1.4.1.10950.1.1.6.6.21 | ScalarsipStatRedirectFailures | read-only | deprecated | Total number of failed redirects |
| 1.3.6.1.4.1.10950.1.1.6.6.22 | ScalarsipStatMessageRoutingFailures | read-only | deprecated | Failures due to route lookup - no enabled route found |
| 1.3.6.1.4.1.10950.1.1.6.6.23 | ScalarsipStatAuthenticationChallenges | read-only | current | Number of Authentication Challenges |
| 1.3.6.1.4.1.10950.1.1.6.6.24 | ScalarsipStatRTPFWTraversalTimeouts | read-only | current | Number of RTP forward traversal timeouts |
| 1.3.6.1.4.1.10950.1.1.6.6.25 | ScalarsipStatMessagesReroutedToMate | read-only | deprecated | Number of messages rerouted to mate |
| 1.3.6.1.4.1.10950.1.1.6.6.26 | ScalarsipStatSameSideActiveCalls | read-only | current | Same side actvie calls |
| 1.3.6.1.4.1.10950.1.1.6.6.27 | ScalarsipStatNormalActiveCalls | read-only | current | Normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.6.28 | ScalarsipStatPeakSameSideActiveCalls | read-only | current | Peak same side active calls |
| 1.3.6.1.4.1.10950.1.1.6.6.29 | ScalarsipStatPeakNormalActiveCalls | read-only | current | Peak normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.6.30 | ScalarsipStatCurrentFaxSessions | read-only | deprecated | Current number of FAX Sessions that are active |
| 1.3.6.1.4.1.10950.1.1.6.6.31 | ScalarsipStatPeakFaxSessions | read-only | deprecated | Maximum number of FAX sessions active at any point in time since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.6.32 | ScalarsipStatTotalFaxSessions | read-only | deprecated | The total number of FAX sessions that have occurred since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.6.33 | ScalarsipStatPeakTotalActiveCalls | read-only | current | Peak number of total active calls on the nCite since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.7 | NodevlanStats | |||
| 1.3.6.1.4.1.10950.1.1.6.7.2 | TablevlanStatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.7.2.1 | RowvlanStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.7.2.1.1 | ColumnvlanStatsSlotNum | read-only | current | Slot number of line card |
| 1.3.6.1.4.1.10950.1.1.6.7.2.1.2 | ColumnvlanStatsPortNum | read-only | current | Port number for the vlan stats |
| 1.3.6.1.4.1.10950.1.1.6.7.2.1.3 | ColumnvlanStatsVlanLabel | read-only | current | Unique identifier of the VLAN |
| 1.3.6.1.4.1.10950.1.1.6.7.2.1.4 | ColumnvlanTotalPacketsXmit | read-only | current | Number of packets transmitted on a VLAN |
| 1.3.6.1.4.1.10950.1.1.6.7.2.1.5 | ColumnvlanTotalPacketsRcvd | read-only | current | Number of packets receivedon the given VLAN |
| 1.3.6.1.4.1.10950.1.1.6.7.3 | ScalarvlanStatsReset | read-write | current | Set to reset when the policy image changes |
| 1.3.6.1.4.1.10950.1.1.6.8 | NodecustSipStats | |||
| 1.3.6.1.4.1.10950.1.1.6.8.1 | TablecustSipStatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1 | RowcustSipStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.1 | ColumncustSipStatId | read-only | current | Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.2 | ColumncustSipStatCallsInitiating | read-only | current | Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.3 | ColumncustSipStatNonLocalActiveCalls | read-only | deprecated | Real-time stat of calls that are currently in the ACTIVE state that are non-local calls |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.4 | ColumncustSipStatLocalActiveCalls | read-only | current | Real-time stat that is the number of active calls that are local |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.5 | ColumncustSipStatTermCalls | read-only | current | Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.6 | ColumncustSipStatPeakActiveCalls | read-only | deprecated | Peak number of active calls since the last nCite reboot. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.7 | ColumncustSipStatTotalActiveCalls | read-only | current | Total number of active calls. custSipStatLocalActvieCalls + custSipStatNonLocalActiveCalls |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.8 | ColumncustSipStatCallsCompletedSuccess | read-only | current | Total number of calls that have been completed successfully since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.9 | ColumncustSipStatCallsFailed | read-only | current | Total number of calls that completed due to some failure since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.10 | ColumncustSipStatCallsAbandoned | read-only | current | Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.11 | ColumncustSipStatCallsDropped | read-only | deprecated | Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.12 | ColumncustSipStatCallsDegraded | read-only | current | Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.13 | ColumncustSipStatCallMediaTimeouts | read-only | current | Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.14 | ColumncustSipStatCallInitTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite… |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.15 | ColumncustSipStatTermTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.16 | ColumncustSipStatCallsProcessed | read-only | current | Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of custSipStatCallsCompletedSuccess, custSipStatCallsFaile… |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.17 | ColumncustSipPeakNonLocalCalls | read-only | deprecated | Peak number of non-local calls since the ncite was reboot or the statistics were cleared |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.18 | ColumncustSipPeakLocalCalls | read-only | current | Peak number of local calls |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.19 | ColumncustSipAuthenticationChallenges | read-only | current | Number of authentication challanges |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.20 | ColumncustSipRTPFWTraversalTimeouts | read-only | current | Number of RTP forward traversal timeouts |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.21 | ColumncustSipSameSideActiveCalls | read-only | current | Number of same side active calls |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.22 | ColumncustSipNormalActiveCalls | read-only | current | Number of normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.23 | ColumncustSipPeakNormalActiveCalls | read-only | current | Maximum number of active normal calls since the statistics were last reset. |
| 1.3.6.1.4.1.10950.1.1.6.8.1.1.24 | ColumncustSipPeakTotalActive | read-only | current | Peak number of total active calls since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.9 | ScalarnCiteStatsConfigReset | read-write | current | This value is set whenever the equipment configuration changes(i.e. a line card is added or removed). |
| 1.3.6.1.4.1.10950.1.1.6.10 | NodenCiteSessionDetailRecord | |||
| 1.3.6.1.4.1.10950.1.1.6.10.1 | ScalarnCiteSDRCollectionCycle | read-only | current | The number of minutes that data is collected per file. |
| 1.3.6.1.4.1.10950.1.1.6.10.2 | ScalarnCIteSDRLastSent | read-only | current | Date and time that the last SDR file was sent to the EMS |
| 1.3.6.1.4.1.10950.1.1.6.10.3 | ScalarnCiteSDREnable | read-only | current | Indicates whether SDR generation is enabled |
| 1.3.6.1.4.1.10950.1.1.6.10.4 | NotificationnCiteSDRSentTrap | current | Description | |
| 1.3.6.1.4.1.10950.1.1.6.10.5 | ScalarnCiteSDRSentTrapAck | read-write | current | nCite SDR sent trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.6.10.6 | ScalarnCiteSDRSentTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.6.11 | NoderegistrationStats | |||
| 1.3.6.1.4.1.10950.1.1.6.11.1 | ScalarregStatNumInitiating | read-only | current | Real-time statistic that is the number of Registrations that are currently in the Initiated state. |
| 1.3.6.1.4.1.10950.1.1.6.11.2 | ScalarregStatNumActive | read-only | current | Real-time statistic that is the number of active registrations. |
| 1.3.6.1.4.1.10950.1.1.6.11.3 | ScalarregStatPeak | read-only | current | Real-time statistic that is the peak number of active registrations. |
| 1.3.6.1.4.1.10950.1.1.6.11.4 | ScalarregStatUpdateSuccess | read-only | current | Total number of successful registration updates since the last time the nCite was reboot |
| 1.3.6.1.4.1.10950.1.1.6.11.5 | ScalarregStatUpdateFailed | read-only | current | Total number of registration update requests that have failed since the nCite was last reboot. |
| 1.3.6.1.4.1.10950.1.1.6.11.6 | ScalarregStatExpired | read-only | current | Total number of registration timeouts that have occurred since the nCite was last reboot. |
| 1.3.6.1.4.1.10950.1.1.6.11.7 | ScalarregStatDropped | read-only | deprecated | Total number of registrations that were dropped due to exceeding admission control since the nCIte was last reboot. |
| 1.3.6.1.4.1.10950.1.1.6.11.8 | ScalarregStatAuthFailures | read-only | current | Total number of registrations that were rejected because they could not be authenticated against a valid customer definition. |
| 1.3.6.1.4.1.10950.1.1.6.11.9 | ScalarregStatInitSipTimeouts | read-only | current | Total number of times a SIP timeout occurred after the receipt of the initial registration and before the ACK is received for the Registration since the last t… |
| 1.3.6.1.4.1.10950.1.1.6.11.10 | ScalarregStatTermSipTimeouts | read-only | current | Total number of times a DIP timeout occurred after the receipt of the terminate registration and before the ACK is received since the last time the nCIte was r… |
| 1.3.6.1.4.1.10950.1.1.6.11.11 | ScalarregStatTerminating | read-only | current | Number of terminating registrations |
| 1.3.6.1.4.1.10950.1.1.6.11.12 | ScalarregStatFailed | read-only | current | Number of failed registrations |
| 1.3.6.1.4.1.10950.1.1.6.11.13 | ScalarregStatAuthenticationChallenges | read-only | current | Registration authentication challenges |
| 1.3.6.1.4.1.10950.1.1.6.11.14 | ScalarregStatUnauthReg | read-only | current | Total number of accumulated unauthorized registrations |
| 1.3.6.1.4.1.10950.1.1.6.12 | NodecustRegStats | |||
| 1.3.6.1.4.1.10950.1.1.6.12.1 | TablecustRegStatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1 | RowcustRegStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.1 | ColumncustRegStatId | read-only | current | Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.2 | ColumncustRegStatNumInitiated | read-only | current | Real-time statistic that is the number of Registrations that are currently in the Initiated state. |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.3 | ColumncustRegStatNumActive | read-only | current | Real-time statistic that is the number of active registrations. |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.4 | ColumncustRegStatPeak | read-only | current | Real-time statistic that is the peak number of active registrations. |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.5 | ColumncustRegStatUpdateSuccess | read-only | current | Total number of successful registration updates since the last time the nCite was reboot |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.6 | ColumncustRegStatUpdateFailed | read-only | current | Total number of registration update requests that have failed since the nCite was last reboot. |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.7 | ColumncustRegStatExpired | read-only | current | Total number of registration timeouts that have occurred since the nCite was last reboot. |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.8 | ColumncustRegStatDropped | read-only | deprecated | Total number of registrations that were dropped due to exceeding admission control since the nCIte was last reboot. |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.9 | ColumncustRegStatInitSipTimeouts | read-only | current | Total number of times a SIP timeout occurred after the receipt of the initial registration and before the ACK is received for the Registration since the last t… |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.10 | ColumncustRegStatTermSipTimeouts | read-only | current | Total number of times a DIP timeout occurred after the receipt of the terminate registration and before the ACK is received since the last time the nCIte was r… |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.11 | ColumncustRegStatTerminating | read-only | current | Number of customer registrations terminating |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.12 | ColumncustRegStatFailed | read-only | current | Number of customer registrations that have failed |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.13 | ColumncustRegAuthenticationChallenges | read-only | current | Customer Authentication challenges |
| 1.3.6.1.4.1.10950.1.1.6.12.1.1.14 | ColumncustRegStatUnauthorizedReg | read-only | current | Number of accumulated unauthorized registrations for a customer |
| 1.3.6.1.4.1.10950.1.1.6.13 | NodentsStats | |||
| 1.3.6.1.4.1.10950.1.1.6.13.1 | ScalarntsStatNumCust | read-only | current | Total number of customers for which NTS Clients are enabled. |
| 1.3.6.1.4.1.10950.1.1.6.13.2 | ScalarntsStatAuthFailures | read-only | current | Total number of times NTS Client connections were rejected because of authentication failures since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.13.3 | ScalarntsStatCustConnected | read-only | current | Number of NTS Clients that are currently connected. |
| 1.3.6.1.4.1.10950.1.1.6.14 | NoderogueStats | |||
| 1.3.6.1.4.1.10950.1.1.6.14.1 | ScalaredrCurrentCallCount | read-only | current | Current number of calls that have been detected as rogue |
| 1.3.6.1.4.1.10950.1.1.6.14.2 | ScalaredrPeakCallCount | read-only | current | Peak number of calls that have been declared rogue |
| 1.3.6.1.4.1.10950.1.1.6.14.3 | ScalaredrTotalCallsRogue | read-only | current | Total number of calls that have been detected as rogue since the last time the nCite was restarted |
| 1.3.6.1.4.1.10950.1.1.6.14.4 | ScalaredrLastDetection | read-only | current | Date/time of the last time that a call was detected as rogue |
| 1.3.6.1.4.1.10950.1.1.6.14.5 | ScalarlrdCurrentCallCount | read-only | current | Current number of LRD rogue calls |
| 1.3.6.1.4.1.10950.1.1.6.14.6 | ScalarlrdPeakCallCount | read-only | current | Maximum number of active rogue calls since the last time the stats were reset |
| 1.3.6.1.4.1.10950.1.1.6.14.7 | ScalarlrdTotalCallsRogue | read-only | current | The cumulative number of rogue calls detected since the stats were reset |
| 1.3.6.1.4.1.10950.1.1.6.14.8 | ScalarlrdLastDetection | read-only | current | Date/time that the last LRD rogue call was detected |
| 1.3.6.1.4.1.10950.1.1.6.15 | ScalarnCiteStatsReset | read-write | current | This value is set when a group of statistics has been requested to be reset |
| 1.3.6.1.4.1.10950.1.1.6.16 | NodecustNtsStats | |||
| 1.3.6.1.4.1.10950.1.1.6.16.1 | TablecustNtsStatsTable | not-accessible | current | NTS Customer statistics table |
| 1.3.6.1.4.1.10950.1.1.6.16.1.1 | RowcustNtsStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.16.1.1.1 | ColumncustNtsStatId | read-only | current | Customer location ID |
| 1.3.6.1.4.1.10950.1.1.6.16.1.1.2 | ColumncustNtsAuthorizationFailed | read-only | current | Number of authorizatin failures for NTS customer |
| 1.3.6.1.4.1.10950.1.1.6.17 | NodesipH323Stats | |||
| 1.3.6.1.4.1.10950.1.1.6.17.1 | ScalarsipH323CallsInitiating | read-only | current | Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.17.2 | ScalarsipH323LocalActiveCalls | read-only | current | Real-time stat that is the number of active calls that are local |
| 1.3.6.1.4.1.10950.1.1.6.17.3 | ScalarsipH323TermCalls | read-only | current | Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.17.4 | ScalarsipH323PeakTotalActiveCalls | read-only | current | Peak number of active calls since the last nCite reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.5 | ScalarsipH323TotalActiveCalls | read-only | current | Total number of active calls. sipH323LocalActvieCalls + sipH323NonLocalActiveCalls |
| 1.3.6.1.4.1.10950.1.1.6.17.6 | ScalarsipH323CallsCompletedSuccess | read-only | current | Total number of calls that have been completed successfully since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.7 | ScalarsipH323CallsFailed | read-only | current | Total number of calls that completed due to some failure since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.8 | ScalarsipH323CallsAbandoned | read-only | current | Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.9 | ScalarsipH323CallsDropped | read-only | deprecated | Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.10 | ScalarsipH323CallsDegraded | read-only | current | Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.11 | ScalarsipH323AuthFailures | read-only | current | Total number of calls that were rejected because they could not be autenticated against a valid customer definition since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.12 | ScalarsipH323CallMediaTimeouts | read-only | current | Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.13 | ScalarsipH323CallInitTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite… |
| 1.3.6.1.4.1.10950.1.1.6.17.14 | ScalarsipH323TermTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.15 | ScalarsipH323MsgErrs | read-only | current | Total number of times a SIP error message was received since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.17.16 | ScalarsipH323CallsProcessed | read-only | current | Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of sipH323CallsCompletedSuccess, sipH323CallsFailed, sipH3… |
| 1.3.6.1.4.1.10950.1.1.6.17.17 | ScalarsipH323PeakLocalCalls | read-only | current | Real-time statistic that is the peak number of active local calls. |
| 1.3.6.1.4.1.10950.1.1.6.17.18 | ScalarsipH323RedirectSuccess | read-only | deprecated | Total number of successful redirects |
| 1.3.6.1.4.1.10950.1.1.6.17.19 | ScalarsipH323RedirectFailures | read-only | deprecated | Total number of failed redirects |
| 1.3.6.1.4.1.10950.1.1.6.17.20 | ScalarsipH323MessageRoutingFailures | read-only | current | Failures due to route lookup - no enabled route found |
| 1.3.6.1.4.1.10950.1.1.6.17.21 | ScalarsipH323AuthenticationChallenges | read-only | current | Number of Authentication Challenges |
| 1.3.6.1.4.1.10950.1.1.6.17.22 | ScalarsipH323RTPFWTraversalTimeouts | read-only | current | Number of RTP forward traversal timeouts |
| 1.3.6.1.4.1.10950.1.1.6.17.23 | ScalarsipH323MessagesReroutedToMate | read-only | deprecated | Number of messages rerouted to mate |
| 1.3.6.1.4.1.10950.1.1.6.17.24 | ScalarsipH323SameSideActiveCalls | read-only | current | Same side actvie calls |
| 1.3.6.1.4.1.10950.1.1.6.17.25 | ScalarsipH323NormalActiveCalls | read-only | current | Normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.17.26 | ScalarsipH323PeakSameSideActiveCalls | read-only | current | Peak same side active calls |
| 1.3.6.1.4.1.10950.1.1.6.17.27 | ScalarsipH323PeakNormalActiveCalls | read-only | current | Peak normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.17.28 | ScalarsipH323CurrentFaxSessions | read-only | deprecated | Current number of FAX Sessions that are active |
| 1.3.6.1.4.1.10950.1.1.6.17.29 | ScalarsipH323PeakFaxSessions | read-only | deprecated | Maximum number of FAX sessions active at any point in time since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.17.30 | ScalarsipH323TotalFaxSessions | read-only | deprecated | The total number of FAX sessions that have occurred since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.18 | Nodeh323Stats | |||
| 1.3.6.1.4.1.10950.1.1.6.18.1 | Scalarh323CallsInitiating | read-only | current | Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.18.2 | Scalarh323LocalActiveCalls | read-only | current | Real-time stat that is the number of active calls that are local |
| 1.3.6.1.4.1.10950.1.1.6.18.3 | Scalarh323TermCalls | read-only | current | Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.18.4 | Scalarh323PeakTotalActiveCalls | read-only | current | Peak number of active calls since the last nCite reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.5 | Scalarh323TotalActiveCalls | read-only | current | Total number of active calls. h323LocalActvieCalls + h323NonLocalActiveCalls |
| 1.3.6.1.4.1.10950.1.1.6.18.6 | Scalarh323CallsCompletedSuccess | read-only | current | Total number of calls that have been completed successfully since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.7 | Scalarh323CallsFailed | read-only | current | Total number of calls that completed due to some failure since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.8 | Scalarh323CallsAbandoned | read-only | current | Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.9 | Scalarh323CallsDropped | read-only | deprecated | Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.10 | Scalarh323CallsDegraded | read-only | current | Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.11 | Scalarh323AuthFailures | read-only | current | Total number of calls that were rejected because they could not be autenticated against a valid customer definition since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.12 | Scalarh323CallMediaTimeouts | read-only | current | Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.13 | Scalarh323CallInitTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite… |
| 1.3.6.1.4.1.10950.1.1.6.18.14 | Scalarh323TermTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.15 | Scalarh323MsgErrs | read-only | current | Total number of times a SIP error message was received since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.18.16 | Scalarh323CallsProcessed | read-only | current | Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of h323CallsCompletedSuccess, h323CallsFailed, h323CallsAb… |
| 1.3.6.1.4.1.10950.1.1.6.18.17 | Scalarh323PeakLocalCalls | read-only | current | Real-time statistic that is the peak number of active local calls. |
| 1.3.6.1.4.1.10950.1.1.6.18.18 | Scalarh323MessageRoutingFailures | read-only | current | Failures due to route lookup - no enabled route found |
| 1.3.6.1.4.1.10950.1.1.6.18.19 | Scalarh323AuthenticationChallenges | read-only | current | Number of Authentication Challenges |
| 1.3.6.1.4.1.10950.1.1.6.18.20 | Scalarh323RTPFWTraversalTimeouts | read-only | current | Number of RTP forward traversal timeouts |
| 1.3.6.1.4.1.10950.1.1.6.18.21 | Scalarh323SameSideActiveCalls | read-only | current | Same side actvie calls |
| 1.3.6.1.4.1.10950.1.1.6.18.22 | Scalarh323NormalActiveCalls | read-only | current | Normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.18.23 | Scalarh323PeakSameSideActiveCalls | read-only | current | Peak same side active calls |
| 1.3.6.1.4.1.10950.1.1.6.18.24 | Scalarh323PeakNormalActiveCalls | read-only | current | Peak normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.18.25 | Scalarh323CurrentFaxSessions | read-only | deprecated | Current number of FAX Sessions that are active |
| 1.3.6.1.4.1.10950.1.1.6.18.26 | Scalarh323PeakFaxSessions | read-only | deprecated | Maximum number of FAX sessions active at any point in time since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.18.27 | Scalarh323TotalFaxSessions | read-only | deprecated | The total number of FAX sessions that have occurred since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.19 | NodevoIpStats | |||
| 1.3.6.1.4.1.10950.1.1.6.19.1 | ScalarvoIpCallsInitiating | read-only | current | Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.19.2 | ScalarvoIpLocalActiveCalls | read-only | current | Real-time stat that is the number of active calls that are local |
| 1.3.6.1.4.1.10950.1.1.6.19.3 | ScalarvoIpTermCalls | read-only | current | Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.19.4 | ScalarvoIpPeakTotalActiveCalls | read-only | current | Peak number of active calls since the last nCite reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.5 | ScalarvoIpTotalActiveCalls | read-only | current | Total number of active calls. voIpLocalActvieCalls + voIpNonLocalActiveCalls |
| 1.3.6.1.4.1.10950.1.1.6.19.6 | ScalarvoIpCallsCompletedSuccess | read-only | current | Total number of calls that have been completed successfully since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.7 | ScalarvoIpCallsFailed | read-only | current | Total number of calls that completed due to some failure since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.8 | ScalarvoIpCallsAbandoned | read-only | current | Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.9 | ScalarvoIpCallsDropped | read-only | deprecated | Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.10 | ScalarvoIpCallsDegraded | read-only | current | Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.11 | ScalarvoIpAuthFailures | read-only | current | Total number of calls that were rejected because they could not be autenticated against a valid customer definition since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.12 | ScalarvoIpCallMediaTimeouts | read-only | current | Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.13 | ScalarvoIpCallInitTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite… |
| 1.3.6.1.4.1.10950.1.1.6.19.14 | ScalarvoIpTermTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.15 | ScalarvoIpMsgErrs | read-only | current | Total number of times a SIP error message was received since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.19.16 | ScalarvoIpCallsProcessed | read-only | current | Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of voIpCallsCompletedSuccess, voIpCallsFailed, voIpCallsAb… |
| 1.3.6.1.4.1.10950.1.1.6.19.17 | ScalarvoIpPeakLocalCalls | read-only | current | Real-time statistic that is the peak number of active local calls. |
| 1.3.6.1.4.1.10950.1.1.6.19.18 | ScalarvoIpRedirectSuccess | read-only | deprecated | Total number of successful redirects |
| 1.3.6.1.4.1.10950.1.1.6.19.19 | ScalarvoIpRedirectFailures | read-only | deprecated | Total number of failed redirects |
| 1.3.6.1.4.1.10950.1.1.6.19.20 | ScalarvoIpMessageRoutingFailures | read-only | current | Failures due to route lookup - no enabled route found |
| 1.3.6.1.4.1.10950.1.1.6.19.21 | ScalarvoIpAuthenticationChallenges | read-only | current | Number of Authentication Challenges |
| 1.3.6.1.4.1.10950.1.1.6.19.22 | ScalarvoIpRTPFWTraversalTimeouts | read-only | current | Number of RTP forward traversal timeouts |
| 1.3.6.1.4.1.10950.1.1.6.19.23 | ScalarvoIpMessagesReroutedToMate | read-only | deprecated | Number of messages rerouted to mate |
| 1.3.6.1.4.1.10950.1.1.6.19.24 | ScalarvoIpSameSideActiveCalls | read-only | current | Same side actvie calls |
| 1.3.6.1.4.1.10950.1.1.6.19.25 | ScalarvoIpNormalActiveCalls | read-only | current | Normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.19.26 | ScalarvoIpPeakSameSideActiveCalls | read-only | current | Peak same side active calls |
| 1.3.6.1.4.1.10950.1.1.6.19.27 | ScalarvoIpPeakNormalActiveCalls | read-only | current | Peak normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.19.28 | ScalarvoIpCurrentFaxSessions | read-only | deprecated | Current number of FAX Sessions that are active |
| 1.3.6.1.4.1.10950.1.1.6.19.29 | ScalarvoIpPeakFaxSessions | read-only | deprecated | Maximum number of FAX sessions active at any point in time since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.19.30 | ScalarvoIpTotalFaxSessions | read-only | deprecated | The total number of FAX sessions that have occurred since the statistics were last reset |
| 1.3.6.1.4.1.10950.1.1.6.20 | NodecustSipH323Stats | |||
| 1.3.6.1.4.1.10950.1.1.6.20.1 | TablecustSipH323StatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1 | RowcustSipH323StatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.1 | ColumncustSipH323Id | read-only | current | Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.2 | ColumncustSipH323CallsInitiating | read-only | current | Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.3 | ColumncustSipH323LocalActiveCalls | read-only | current | Real-time stat that is the number of active calls that are local |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.4 | ColumncustSipH323TermCalls | read-only | current | Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.5 | ColumncustSipH323PeakTotalActiveCalls | read-only | current | Peak number of total active calls since the last nCite reboot. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.6 | ColumncustSipH323TotalActiveCalls | read-only | current | Total number of active calls. custSipH323StatLocalActvieCalls + custSipH323StatNonLocalActiveCalls |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.7 | ColumncustSipH323CallsCompletedSuccess | read-only | current | Total number of calls that have been completed successfully since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.8 | ColumncustSipH323CallsFailed | read-only | current | Total number of calls that completed due to some failure since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.9 | ColumncustSipH323CallsAbandoned | read-only | current | Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.10 | ColumncustSipH323CallsDropped | read-only | deprecated | Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.11 | ColumncustSipH323CallsDegraded | read-only | current | Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.12 | ColumncustSipH323CallMediaTimeouts | read-only | current | Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.13 | ColumncustSipH323CallInitTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite… |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.14 | ColumncustSipH323TermTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.15 | ColumncustSipH323CallsProcessed | read-only | current | Total number of calls that have been processed since the nCIte was last reboot. This will be the sum of custSipH323CallsCompletedSuccess, custSipH323CallsFaile… |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.16 | ColumncustSipH323PeakLocalCalls | read-only | current | Peak number of local calls |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.17 | ColumncustSipH323AuthenticationChallenges | read-only | current | Number of authentication challanges |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.18 | ColumncustSipH323RTPFWTraversalTimeouts | read-only | current | Number of RTP forward traversal timeouts |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.19 | ColumncustSipH323SameSideActiveCalls | read-only | current | Number of same side active calls |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.20 | ColumncustSipH323NormalActiveCalls | read-only | current | Number of normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.20.1.1.21 | ColumncustSipH323PeakNormalActiveCalls | read-only | current | Maximum number of active normal calls since the statistics were last reset. |
| 1.3.6.1.4.1.10950.1.1.6.21 | NodecustH323Stats | |||
| 1.3.6.1.4.1.10950.1.1.6.21.1 | TablecustH323StatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1 | RowcustH323StatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.1 | ColumncustH323Id | read-only | current | Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.2 | ColumncustH323CallsInitiating | read-only | current | Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.3 | ColumncustH323LocalActiveCalls | read-only | current | Real-time stat that is the number of active calls that are local |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.4 | ColumncustH323TermCalls | read-only | current | Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.5 | ColumncustH323PeakTotalActiveCalls | read-only | current | Peak number of total active calls since the last nCite reboot. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.6 | ColumncustH323TotalActiveCalls | read-only | current | Total number of active calls. custH323StatLocalActvieCalls + custH323StatNonLocalActiveCalls |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.7 | ColumncustH323CallsCompletedSuccess | read-only | current | Total number of calls that have been completed successfully since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.8 | ColumncustH323CallsFailed | read-only | current | Total number of calls that completed due to some failure since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.9 | ColumncustH323CallsAbandoned | read-only | current | Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.10 | ColumncustH323CallsDropped | read-only | deprecated | Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.11 | ColumncustH323CallsDegraded | read-only | current | Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.12 | ColumncustH323CallMediaTimeouts | read-only | current | Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.13 | ColumncustH323CallInitTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite… |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.14 | ColumncustH323TermTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.15 | ColumncustH323CallsProcessed | read-only | current | Total number of calls that have been processed since the nCIte was last reboot. This will be the sum of custH323CallsCompletedSuccess, custH323CallsFailed, cus… |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.16 | ColumncustH323PeakLocalCalls | read-only | current | Peak number of local calls |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.17 | ColumncustH323AuthenticationChallenges | read-only | current | Number of authentication challanges |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.18 | ColumncustH323RTPFWTraversalTimeouts | read-only | current | Number of RTP forward traversal timeouts |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.19 | ColumncustH323SameSideActiveCalls | read-only | current | Number of same side active calls |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.20 | ColumncustH323NormalActiveCalls | read-only | current | Number of normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.21.1.1.21 | ColumncustH323PeakNormalActiveCalls | read-only | current | Maximum number of active normal calls since the statistics were last reset. |
| 1.3.6.1.4.1.10950.1.1.6.22 | NodecustVoIpStats | |||
| 1.3.6.1.4.1.10950.1.1.6.22.1 | TablecustVoIpStatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1 | RowcustVoIpStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.1 | ColumncustVoIpId | read-only | current | Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.2 | ColumncustVoIpCallsInitiating | read-only | current | Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.3 | ColumncustVoIpLocalActiveCalls | read-only | current | Real-time stat that is the number of active calls that are local |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.4 | ColumncustVoIpTermCalls | read-only | current | Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.5 | ColumncustVoIpPeakTotalActiveCalls | read-only | current | Peak number of total active calls since the last nCite reboot. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.6 | ColumncustVoIpTotalActiveCalls | read-only | current | Total number of active calls. custVoIpStatLocalActvieCalls + custVoIpStatNonLocalActiveCalls |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.7 | ColumncustVoIpCallsCompletedSuccess | read-only | current | Total number of calls that have been completed successfully since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.8 | ColumncustVoIpCallsFailed | read-only | current | Total number of calls that completed due to some failure since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.9 | ColumncustVoIpCallsAbandoned | read-only | current | Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.10 | ColumncustVoIpCallsDropped | read-only | deprecated | Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.11 | ColumncustVoIpCallsDegraded | read-only | current | Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.12 | ColumncustVoIpCallMediaTimeouts | read-only | current | Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.13 | ColumncustVoIpCallInitTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite… |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.14 | ColumncustVoIpTermTimeouts | read-only | current | Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot. |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.15 | ColumncustVoIpCallsProcessed | read-only | current | Total number of calls that have been processed since the nCIte was last reboot. This will be the sum of custVoIpCallsCompletedSuccess, custVoIpCallsFailed, cus… |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.16 | ColumncustVoIpPeakLocalCalls | read-only | current | Peak number of local calls |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.17 | ColumncustVoIpAuthenticationChallenges | read-only | current | Number of authentication challanges |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.18 | ColumncustVoIpRTPFWTraversalTimeouts | read-only | current | Number of RTP forward traversal timeouts |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.19 | ColumncustVoIpSameSideActiveCalls | read-only | current | Number of same side active calls |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.20 | ColumncustVoIpNormalActiveCalls | read-only | current | Number of normal active calls |
| 1.3.6.1.4.1.10950.1.1.6.22.1.1.21 | ColumncustVoIpPeakNormalActiveCalls | read-only | current | Maximum number of active normal calls since the statistics were last reset. |
| 1.3.6.1.4.1.10950.1.1.6.23 | NodemediaStats | |||
| 1.3.6.1.4.1.10950.1.1.6.23.1 | ScalarmediaStatCurrentAudioSessions | read-only | current | Current number of active audio sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.2 | ScalarmediaStatPeakAudioSessions | read-only | current | Peak number of audio sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.3 | ScalarmediaStatTotalAudioSessions | read-only | current | Total accumulated audio sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.4 | ScalarmediaStatCurrentVideoSessions | read-only | current | Current number of active video sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.5 | ScalarmediaStatPeakVideoSessions | read-only | current | Peak number of video sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.6 | ScalarmediaStatTotalVideoSessions | read-only | current | Total accumulated video sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.7 | ScalarmediaStatCurrentFaxSessions | read-only | current | Current number of active fax sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.8 | ScalarmediaStatPeakFaxSessions | read-only | current | Peak number of fax sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.9 | ScalarmediaStatTotalFaxSessions | read-only | current | Total accumulated number of fax sessions |
| 1.3.6.1.4.1.10950.1.1.6.23.10 | ScalarmediaStatTotalFailures | read-only | current | Total accumulated number of media failures |
| 1.3.6.1.4.1.10950.1.1.6.24 | Nodeh323RegStats | |||
| 1.3.6.1.4.1.10950.1.1.6.24.1 | Scalarh323RegStatActiveReg | read-only | current | Current number of active H.323 registrations |
| 1.3.6.1.4.1.10950.1.1.6.24.2 | Scalarh323RegStatExpiredReg | read-only | current | Number of expired H.323 registrations |
| 1.3.6.1.4.1.10950.1.1.6.24.3 | Scalarh323RegStatUnauthorizedReg | read-only | current | Number of unauthorized H.323 regristrations |
| 1.3.6.1.4.1.10950.1.1.6.24.4 | Scalarh323RegStatPeakActiveReg | read-only | current | Peak number of active H.323 registrations |
| 1.3.6.1.4.1.10950.1.1.6.24.5 | Scalarh323RegStatUpdateComplete | read-only | current | Number of H.323 registration updates completed successfully |
| 1.3.6.1.4.1.10950.1.1.6.24.6 | Scalarh323RegStatUpdateFailures | read-only | current | Number of H.323 registration update failures |
| 1.3.6.1.4.1.10950.1.1.6.24.7 | Scalarh323RegStatAuthFailures | read-only | current | Number of H.323 registration authentication failures |
| 1.3.6.1.4.1.10950.1.1.6.25 | NodecustH323RegStats | |||
| 1.3.6.1.4.1.10950.1.1.6.25.1 | TablecustH323RegStatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1 | RowcustH323RegStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1.1 | ColumncustH323RegStatId | read-only | current | Unique identifier for this customer as specified in the XML file |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1.2 | ColumncustH323RegStatActiveReg | read-only | current | Current number of active H.323 registrations for a customer |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1.3 | ColumncustH323RegStatExpiredReg | read-only | current | Current number of expired H.323 registrations for a customer |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1.4 | ColumncustH323RegStatUnauthorizedReg | read-only | current | The accumulated number of unauthorized H.323 registrations for a customer |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1.5 | ColumncustH323RegStatPeakActiveReg | read-only | current | Peak number of active H.323 registrations for a customer |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1.6 | ColumncustH323RegStatUpdateComplete | read-only | current | The accumulated number of updated H.323 registrations for a customer |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1.7 | ColumncustH323RegStatUpdateFailures | read-only | current | The accumulated number of failed H.323 registration updates for a customer |
| 1.3.6.1.4.1.10950.1.1.6.25.1.1.8 | ColumncustH323RegStatAuthFailures | read-only | current | The accumulated number of H.323 registration authentication faliures for a customer |
| 1.3.6.1.4.1.10950.1.1.6.26 | NodesipCommonStats | |||
| 1.3.6.1.4.1.10950.1.1.6.26.1 | ScalarsipCommonStatsDiscontinuityTimer | read-only | current | The number of centi-seconds since the sipCommonStats were last reset. When the value of this attribute is reset a discontinuity of all of the counters in the s… |
| 1.3.6.1.4.1.10950.1.1.6.26.2 | NodesipCommonStatsScalars | |||
| 1.3.6.1.4.1.10950.1.1.6.26.2.1 | ScalarsipCommonStatsTotalMessageErrors | read-only | current | Cumulative tally, since sipCommonStatsDiscontinuityTimer was reset, of SIP message errors encountered. Discontinuities in this counter can be detected by the v… |
| 1.3.6.1.4.1.10950.1.1.6.26.2.2 | ScalarsipCommonStatsTotalMessageRoutingFailures | read-only | current | Cumulative tally, since sipCommonStatsDiscontinuityTimer was reset, of failures to determine routing for a SIP message. Discontinuities in this counter can be … |
| 1.3.6.1.4.1.10950.1.1.6.26.2.3 | ScalarsipCommonStatsTotalMessageTransmitFailures | read-only | current | Cumulative tally, since sipCommonStatsDiscontinuityTimer was reset, of failures to transmit a SIP message. Discontinuities in this counter can be detected by t… |
| 1.3.6.1.4.1.10950.1.1.6.26.2.4 | ScalarsipCommonStatsTotalAuthenticationFailures | read-only | current | Cumulative tally, since sipCommonStatsDiscontinuityTimer was reset, of SIP messages that failed Customer Authentication, Sender or Target. Discontinuities in t… |
| 1.3.6.1.4.1.10950.1.1.6.27 | NodesipEvtDlgStats | |||
| 1.3.6.1.4.1.10950.1.1.6.27.1 | ScalarsipEvtDlgStatsDiscontinuityTimer | read-only | current | The number of centi-seconds since the sipEvtDlgStats were last reset. When the value of this attribute is reset a discontinuity of all of the counters in the s… |
| 1.3.6.1.4.1.10950.1.1.6.27.2 | NodesipEvtDlgStatsScalars | |||
| 1.3.6.1.4.1.10950.1.1.6.27.2.1 | ScalarsipEvtDlgStatsActiveDialogs | read-only | current | The current number of Event Dialogs successfully created by a SUBSCRIBE request. |
| 1.3.6.1.4.1.10950.1.1.6.27.2.2 | ScalarsipEvtDlgStatsPeakActiveDialogs | read-only | current | The peak number of Active Dialogs at one time since startup or the last clear. |
| 1.3.6.1.4.1.10950.1.1.6.27.2.3 | ScalarsipEvtDlgStatsTerminatedDialogs | read-only | current | |
| 1.3.6.1.4.1.10950.1.1.6.27.2.4 | ScalarsipEvtDlgStatsExpiredDialogs | read-only | current | Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated due to expiration for the entire system. Discontinuit… |
| 1.3.6.1.4.1.10950.1.1.6.27.2.5 | ScalarsipEvtDlgStatsFailedDialogs | read-only | current | Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated due to error reponse to establishing SUBSCRIBE, an Ab… |
| 1.3.6.1.4.1.10950.1.1.6.27.2.6 | ScalarsipEvtDlgStatsUnauthorizedDialogs | read-only | current | Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were not created or were terminated due to failing authorization (exc… |
| 1.3.6.1.4.1.10950.1.1.6.27.2.7 | ScalarsipEvtDlgStatsAuthenticationChallenges | read-only | current | Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that received an Authentication Challenge response (401/407) to the establ… |
| 1.3.6.1.4.1.10950.1.1.6.27.3 | TablesipEvtDlgCustStatsTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1 | RowsipEvtDlgCustStatsEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1.1 | ColumnsipEvtDlgCustStatsIndex | read-only | current | Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1.2 | ColumnsipEvtDlgCustStatsActiveDialogs | read-only | current | The current number of Event Dialogs successfully created by a SUBSCRIBE request for this customer. |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1.3 | ColumnsipEvtDlgCustStatsPeakActiveDialogs | read-only | current | The peak number of Active Dialogs at one time since startup or the last clear for this customer. |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1.4 | ColumnsipEvtDlgCustStatsTerminatedDialogs | read-only | current | |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1.5 | ColumnsipEvtDlgCustStatsExpiredDialogs | read-only | current | Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated due to expiration for this customer. Discontinuities … |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1.6 | ColumnsipEvtDlgCustStatsFailedDialogs | read-only | current | Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated due to error reponse to establishing SUBSCRIBE, an Ab… |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1.7 | ColumnsipEvtDlgCustStatsUnauthorizedDialogs | read-only | current | Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were not created or were terminated due to failing authorization (exc… |
| 1.3.6.1.4.1.10950.1.1.6.27.3.1.8 | ColumnsipEvtDlgCustStatsAuthenticationChallenges | read-only | current | Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that received an Authentication Challenge response (401/407) to the establ… |
| 1.3.6.1.4.1.10950.1.1.7 | Nodediagnostics | |||
| 1.3.6.1.4.1.10950.1.1.7.2 | NoderunDiagGroup | |||
| 1.3.6.1.4.1.10950.1.1.7.2.1 | ScalardiagType | read-write | deprecated | Diagnostic Type |
| 1.3.6.1.4.1.10950.1.1.7.2.2 | ScalardiagDeviceSlotNum | read-write | deprecated | Slot that contains the device |
| 1.3.6.1.4.1.10950.1.1.7.2.3 | ScalardiagDevPortNum | read-write | deprecated | Port number used for the diagnostic. Should be defaulted if not used. |
| 1.3.6.1.4.1.10950.1.1.7.2.4 | ScalardiagStartCmd | read-write | deprecated | Setting of this value causes the nCite to perform the requested diagnostic |
| 1.3.6.1.4.1.10950.1.1.7.3 | TablediagResultsTable | not-accessible | deprecated | Table contains historical results of diagnostics |
| 1.3.6.1.4.1.10950.1.1.7.3.1 | RowdiagResultsEntry | not-accessible | deprecated | Row Description |
| 1.3.6.1.4.1.10950.1.1.7.3.1.1 | ColumndiagRsltIndex | read-only | deprecated | Column Description |
| 1.3.6.1.4.1.10950.1.1.7.3.1.2 | ColumndiagRsltStartTimeStamp | read-only | deprecated | Time that the diagnostic was started |
| 1.3.6.1.4.1.10950.1.1.7.3.1.3 | ColumndiagRsltCompleteTimeStamp | read-only | deprecated | Date/time the diagnostic completed |
| 1.3.6.1.4.1.10950.1.1.7.3.1.4 | ColumndiagRsltDesc | read-only | deprecated | Description of the results |
| 1.3.6.1.4.1.10950.1.1.7.3.1.5 | ColumndiagRsltType | read-only | deprecated | Description |
| 1.3.6.1.4.1.10950.1.1.7.3.1.6 | ColumndiagRsltDeviceSlotNum | read-only | deprecated | Device slot number that executed the diagnostic |
| 1.3.6.1.4.1.10950.1.1.7.3.1.7 | ColumndiagRsltDevicePortNum | read-only | deprecated | Device port number |
| 1.3.6.1.4.1.10950.1.1.7.4 | NotificationdiagStartedTrap | deprecated | This trap is sent when the diagnostic is started | |
| 1.3.6.1.4.1.10950.1.1.7.5 | NotificationdiagCompleteTrap | deprecated | This trap is sent when the diagnostic has completed | |
| 1.3.6.1.4.1.10950.1.1.7.6 | ScalardiagRsltID | read-write | deprecated | Table entry to delete |
| 1.3.6.1.4.1.10950.1.1.7.7 | ScalardiagRsltAcknowledge | read-write | deprecated | Acknowledge for diagnostic |
| 1.3.6.1.4.1.10950.1.1.7.8 | ScalardiagStartedTrapAck | read-write | deprecated | Diag start trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.7.9 | ScalardiagCompleteTrapAck | read-write | deprecated | Diag complete trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.7.10 | ScalardiagStartedTrapAckSource | read-write | deprecated | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.7.11 | ScalardiagCompleteTrapAckSource | read-write | deprecated | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.8 | NodepolicyProvisioning | |||
| 1.3.6.1.4.1.10950.1.1.8.1 | ScalaractiveImgName | read-only | current | Name of the XML file that is currently active on the nCite |
| 1.3.6.1.4.1.10950.1.1.8.2 | ScalaractiveImgPidSideAFilename | read-only | deprecated | Filename of the PID map for side A |
| 1.3.6.1.4.1.10950.1.1.8.3 | ScalaractiveImgPidSideBFilename | read-only | deprecated | Filename of the PID map for side B |
| 1.3.6.1.4.1.10950.1.1.8.4 | ScalaractiveImgDwnldTimeStamp | read-only | current | Date/time that the active image file was downloaded |
| 1.3.6.1.4.1.10950.1.1.8.5 | ScalaractiveImgBuildStartTimeStamp | read-only | deprecated | Date/time that the active image started building |
| 1.3.6.1.4.1.10950.1.1.8.6 | ScalaractiveImgBuildCompleteTimeStamp | read-only | deprecated | Date/time that the active image completed building |
| 1.3.6.1.4.1.10950.1.1.8.7 | ScalaractiveImgActivatedTimeStamp | read-only | current | Date/time that the active image was activated |
| 1.3.6.1.4.1.10950.1.1.8.8 | ScalarcommitImgName | read-only | current | Name of the XML file that was committed |
| 1.3.6.1.4.1.10950.1.1.8.9 | ScalarcommitImgDwnldTimeStamp | read-only | deprecated | Date/time that the committed image was downloaded |
| 1.3.6.1.4.1.10950.1.1.8.10 | ScalarcommitImgBuildStartTimeStamp | read-only | deprecated | Date/time that the committed image started building |
| 1.3.6.1.4.1.10950.1.1.8.11 | ScalarcommitImgBuildCompleteTimeStamp | read-only | deprecated | Date/time that the committed image completed building |
| 1.3.6.1.4.1.10950.1.1.8.12 | ScalarcommitImgActivatedTimeStamp | read-only | current | Date/time that the committed image was activated |
| 1.3.6.1.4.1.10950.1.1.8.13 | ScalarcommitImgTimeStamp | read-only | current | Date/time that the image was committed |
| 1.3.6.1.4.1.10950.1.1.8.14 | NotificationnewActiveImgTrap | current | This trap is sent whenever a new image activated | |
| 1.3.6.1.4.1.10950.1.1.8.15 | NotificationnewCommittedImgTrap | current | This trap is sent whenever an active image is committed | |
| 1.3.6.1.4.1.10950.1.1.8.16 | ScalarnextImgName | read-only | deprecated | Name of the xml file that has been downloaded for a build |
| 1.3.6.1.4.1.10950.1.1.8.17 | ScalarnextImgState | read-only | deprecated | This reflects the state of the next image. |
| 1.3.6.1.4.1.10950.1.1.8.18 | ScalarnextImgDwnldTimeStamp | read-only | deprecated | Date/time that the image was downloaded |
| 1.3.6.1.4.1.10950.1.1.8.19 | ScalarnextImgBuildStartTimeStamp | read-only | deprecated | Date/time that the next image started building. This field will be defaulted if building has not started |
| 1.3.6.1.4.1.10950.1.1.8.20 | ScalarnextImgBuildCompleteTimeStamp | read-only | deprecated | Date/time that the next image completed building. This field will be defaulted of it was not built. |
| 1.3.6.1.4.1.10950.1.1.8.21 | NotificationbuildStartedTrap | deprecated | Trap sent when a build is started on the nCite | |
| 1.3.6.1.4.1.10950.1.1.8.22 | NotificationbuildCompleteTrap | deprecated | Description | |
| 1.3.6.1.4.1.10950.1.1.8.23 | NotificationnewNextTrap | deprecated | This trap is sent whenever an XML file is downloaded to the nCite | |
| 1.3.6.1.4.1.10950.1.1.8.24 | ScalarnewActiveImgTrapAck | read-write | current | New active image trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.8.25 | ScalarnewCommittedImgTrapAck | read-write | current | New committed image trap acknowlege flag |
| 1.3.6.1.4.1.10950.1.1.8.26 | ScalarbuildStartedTrapAck | read-write | deprecated | Build started trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.8.27 | ScalarbuildCompleteTrapAck | read-write | deprecated | Build complete trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.8.28 | ScalarnewNextTrapAck | read-write | deprecated | New next trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.8.29 | ScalarnewActiveImgTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.8.30 | ScalarnewCommittedImgTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.8.31 | ScalarbuildStartedTrapAckSource | read-write | deprecated | Identifies the Snmp Manager that sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.8.32 | ScalarbuildCompleteTrapAckSource | read-write | deprecated | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.8.33 | ScalarnewNextTrapAckSource | read-write | deprecated | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.9 | NodenCiteStaticRoutes | |||
| 1.3.6.1.4.1.10950.1.1.9.1 | TablestaticRoutesTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.9.1.1 | RowstaticRoutesEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.9.1.1.1 | ColumnstaticRouteDest | read-write | current | Column Description |
| 1.3.6.1.4.1.10950.1.1.9.1.1.2 | ColumnstaticRouteNextHop | read-write | current | Next hop ip address |
| 1.3.6.1.4.1.10950.1.1.9.1.1.3 | ColumnstaticRouteNetMask | read-write | current | Network mask |
| 1.3.6.1.4.1.10950.1.1.9.1.1.4 | ColumnstaticRouteIngressVlanTag | read-write | deprecated | Static route Ingress VLAN tag; 4096 when not applicable |
| 1.3.6.1.4.1.10950.1.1.9.1.1.5 | ColumnstaticRouteMetric1 | read-write | current | The primary routing metric for this static route; -1 if not applicable |
| 1.3.6.1.4.1.10950.1.1.9.1.1.6 | ColumnstaticRouteAdminState | read-write | current | Enables/disables the route |
| 1.3.6.1.4.1.10950.1.1.9.1.1.7 | ColumnstaticRouteIngressProtocol | read-write | deprecated | Description |
| 1.3.6.1.4.1.10950.1.1.9.1.1.8 | ColumnstaticRouteOperState | read-only | current | Operational state of static route |
| 1.3.6.1.4.1.10950.1.1.9.1.1.9 | ColumnstaticRouteType | read-only | current | userDefined = Static Route; user can not modify discovered, DC Host, or DC Net routes |
| 1.3.6.1.4.1.10950.1.1.9.1.1.10 | ColumnstaticRouteRowStatus | read-create | current | Allows adding and deleting of entries |
| 1.3.6.1.4.1.10950.1.1.9.1.1.11 | ColumnstaticRouteVrdTag | read-only | current | Virtual Routing Domain associated with the interface for this route |
| 1.3.6.1.4.1.10950.1.1.9.1.1.12 | ColumnstaticRouteEgressVlan | read-only | current | Egress Vlan associated with interface |
| 1.3.6.1.4.1.10950.1.1.9.2 | NotificationstaticRouteChange | current | This trap is sent whenever changes are made to a static route | |
| 1.3.6.1.4.1.10950.1.1.9.3 | ScalarstaticRoutesRefreshNeeded | read-write | current | This field indicates that changes were made to the static routes |
| 1.3.6.1.4.1.10950.1.1.9.4 | NotificationstaticRoutesRefreshTrap | current | This trap is sent whenever static route states change | |
| 1.3.6.1.4.1.10950.1.1.9.5 | ScalarstaticRouteChangeTrapAck | read-write | current | Static route change trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.9.6 | ScalarstaticRouteRefreshTrapAck | read-write | current | Static route change trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.9.7 | ScalarstaticRouteChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.9.8 | ScalarstaticRouteRefreshTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.10 | NodenCiteArpConfig | |||
| 1.3.6.1.4.1.10950.1.1.10.1 | ScalararpVerifTimerRetryCount | read-write | current | Defines how often the nCite performs ARPs |
| 1.3.6.1.4.1.10950.1.1.10.2 | ScalararpNextHopIP | read-only | current | Next hop ip address |
| 1.3.6.1.4.1.10950.1.1.10.3 | ScalararpMacAddr | read-only | current | mac address |
| 1.3.6.1.4.1.10950.1.1.10.4 | ScalararpRefreshNeeded | read-write | current | This value is used in a trap to notifiy the EMS when the ARP table needs to be refreshed. |
| 1.3.6.1.4.1.10950.1.1.10.5 | NotificationarpRefreshTrap | current | This trap is sent whenever the ARP table changes on the nCite | |
| 1.3.6.1.4.1.10950.1.1.10.6 | ScalararpRefreshTrapAck | read-write | current | This value is set when the EMS acknowledges receipt of the trap |
| 1.3.6.1.4.1.10950.1.1.10.7 | NotificationarpUpdateMacTrap | current | This trap is sent to update the mac address for a specific next hop address | |
| 1.3.6.1.4.1.10950.1.1.10.8 | ScalararpUpdateMacTrapAck | read-write | current | Acknowledge field for update mac trap |
| 1.3.6.1.4.1.10950.1.1.10.9 | ScalararpTrapOper | read-only | current | If value is addUpdate(0) then ARP entry should be created with next hop and mac address provided. If value is delete[1] then next hop and associated fields sho… |
| 1.3.6.1.4.1.10950.1.1.10.10 | ScalararpOperTimerFreq | read-write | current | ARP Verification Timer Retry Count |
| 1.3.6.1.4.1.10950.1.1.10.11 | ScalararpOperTimerRetryCount | read-write | current | ARP Operational Timer Frequency |
| 1.3.6.1.4.1.10950.1.1.10.12 | NotificationarpVerifTimerChangeTrap | current | This trap is sent whenever the ARP verification timers are changed | |
| 1.3.6.1.4.1.10950.1.1.10.13 | ScalararpVerifTimerChangeTrapAck | read-write | current | Used to acknowledge the ARP verification timer change trap |
| 1.3.6.1.4.1.10950.1.1.10.14 | NotificationarpOperTimerChangeTrap | current | This trap is sent whenever a change is made to the ARP Operational Timer | |
| 1.3.6.1.4.1.10950.1.1.10.15 | ScalararpOperTimerChangeTrapAck | read-write | current | This is used to acknowledge the ARP Operational Timer Change Trap |
| 1.3.6.1.4.1.10950.1.1.10.16 | ScalararpRefreshTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.10.17 | ScalararpUpdateMacTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.10.18 | ScalararpVerifTimerChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.10.19 | ScalararpOperTimerChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.11 | NodeipPortConfig | |||
| 1.3.6.1.4.1.10950.1.1.11.1 | TableipPortConfigTable | not-accessible | current | This table contains the IP configuration for each port |
| 1.3.6.1.4.1.10950.1.1.11.1.1 | RowipPortConfigEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.11.1.1.1 | ColumnipPortConfigSlotNum | read-write | current | Slot number of line card |
| 1.3.6.1.4.1.10950.1.1.11.1.1.2 | ColumnipPortConfigPortNum | read-write | current | Port Number |
| 1.3.6.1.4.1.10950.1.1.11.1.1.3 | ColumnipPortConfigIpAddr | read-write | current | IP address of the physical port. |
| 1.3.6.1.4.1.10950.1.1.11.1.1.4 | ColumnipPortVlanTag | read-write | current | VLAN associated with interface |
| 1.3.6.1.4.1.10950.1.1.11.1.1.5 | ColumnipPortConfigNetMask | read-write | current | Net mask for the physical address |
| 1.3.6.1.4.1.10950.1.1.11.1.1.6 | ColumnipPortConfigAdminState | read-write | current | Administrative state of the interface |
| 1.3.6.1.4.1.10950.1.1.11.1.1.7 | ColumnipPortConfigOperState | read-only | current | Operational state of the interface |
| 1.3.6.1.4.1.10950.1.1.11.1.1.8 | ColumnipPortRowStatus | read-create | current | This is used to add/remove items to the table |
| 1.3.6.1.4.1.10950.1.1.11.1.1.9 | ColumnipPortVrdTag | read-write | current | Virtual Routing Domain |
| 1.3.6.1.4.1.10950.1.1.11.2 | NotificationipPortConfigChangeTrap | current | This trap is sent whenever the IP config changes | |
| 1.3.6.1.4.1.10950.1.1.11.3 | ScalaripPortConfigChangeTrapAck | read-write | current | IP port config change trap acknowledge flag |
| 1.3.6.1.4.1.10950.1.1.11.4 | ScalaripPortPlaceHolder | read-only | current | Placeholder - not used |
| 1.3.6.1.4.1.10950.1.1.11.5 | ScalaripPortRefreshOpStates | read-only | current | This is used in a trap to tell the EMS to refresh the operational states associated with an interface |
| 1.3.6.1.4.1.10950.1.1.11.6 | NotificationipPortRefreshTrap | current | This trap is sent when the operational states of the interfaces has changed | |
| 1.3.6.1.4.1.10950.1.1.11.7 | ScalaripPortRefreshTrapAck | read-write | current | This value is set to acknowledge a trap from the nCite |
| 1.3.6.1.4.1.10950.1.1.11.8 | TableipPortAutoNegTable | not-accessible | current | This table is used to configure the auto-negotiate flag per port |
| 1.3.6.1.4.1.10950.1.1.11.8.1 | RowipPortAutoNegEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.11.8.1.1 | ColumnipPortAutoNegSlotNum | read-write | current | Column Description |
| 1.3.6.1.4.1.10950.1.1.11.8.1.2 | ColumnipPortAutoNegPortNum | read-only | current | Column Description |
| 1.3.6.1.4.1.10950.1.1.11.8.1.3 | ColumnipPortAutoNegFlag | read-write | current | Enables/disabled auto-negotiation on the port |
| 1.3.6.1.4.1.10950.1.1.11.9 | NotificationipPortAutoNegChangeTrap | current | This trap is sent whenever a port's auto-negotiation configuration is changed | |
| 1.3.6.1.4.1.10950.1.1.11.10 | ScalaripPortAutoNegChangeTrapAck | read-write | current | This value is set to acknowlege the ipPortAutoNegChangeTrap |
| 1.3.6.1.4.1.10950.1.1.11.11 | ScalaripPortConfigChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.11.12 | ScalaripPortRefreshTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.11.13 | ScalaripPortAutoNegChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.12 | ScalarnCiteOutSyncFlag | read-write | deprecated | This is currently not used. |
| 1.3.6.1.4.1.10950.1.1.13 | ScalartrapAckEnable | read-write | current | Trap acknowledgement enable/disable flag |
| 1.3.6.1.4.1.10950.1.1.14 | ScalarlinkUpTrapAck | read-write | current | Notification when link state changes to up. |
| 1.3.6.1.4.1.10950.1.1.15 | ScalarlinkDownTrapAck | read-write | current | Notificatin when link state changes to down. |
| 1.3.6.1.4.1.10950.1.1.16 | NodenCiteNTA | |||
| 1.3.6.1.4.1.10950.1.1.16.1 | TablenCiteNTATable | not-accessible | current | This table provides the state associated with each customer's NTA |
| 1.3.6.1.4.1.10950.1.1.16.1.1 | RownCiteNTAEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.16.1.1.1 | ColumnnCiteNTACustomerId | read-only | current | Unique identifier associated with the customer. This is provided to the nCite via the XML file. |
| 1.3.6.1.4.1.10950.1.1.16.1.1.2 | ColumnnCiteNTAStatus | read-only | current | Status associated with the connection to the NTA for each customer. |
| 1.3.6.1.4.1.10950.1.1.16.2 | NotificationnCiteNTAReset | current | Notifies the SNMP agent when a new XML file has been activated so the table can be reset. | |
| 1.3.6.1.4.1.10950.1.1.17 | NodenCiteRogue | |||
| 1.3.6.1.4.1.10950.1.1.17.1 | TableedrQuarantineListTable | not-accessible | current | Table that contains the list of calls that have been detected rogue |
| 1.3.6.1.4.1.10950.1.1.17.1.1 | RowedrQuarantineListEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.17.1.1.1 | ColumnerdQLUniqueId | read-only | current | Unique identifier for the call |
| 1.3.6.1.4.1.10950.1.1.17.1.1.2 | ColumnedrQLCallId | read-only | current | Call Id |
| 1.3.6.1.4.1.10950.1.1.17.1.1.3 | ColumnedrQLTimestamp | read-only | current | Date/time that the call was detected as rogue |
| 1.3.6.1.4.1.10950.1.1.17.1.1.4 | ColumnedrQLFrom | read-only | current | From |
| 1.3.6.1.4.1.10950.1.1.17.1.1.5 | ColumnedrQLTo | read-only | current | To |
| 1.3.6.1.4.1.10950.1.1.17.1.1.6 | ColumnedrQLRequestURI | read-only | current | Request URI |
| 1.3.6.1.4.1.10950.1.1.17.1.1.7 | ColumnedrQLSrcMediaIpPort | read-only | current | Source Media Ip Port |
| 1.3.6.1.4.1.10950.1.1.17.1.1.8 | ColumnedrQLDestMediaAnchorIpPort | read-only | current | Destination Media Anchor IP Port |
| 1.3.6.1.4.1.10950.1.1.17.1.1.9 | ColumnedrQLDestMediaIpPort | read-only | current | Destination Media IP Port |
| 1.3.6.1.4.1.10950.1.1.17.1.1.10 | ColumnedrQLRogueStatus | read-only | current | Status of last check of traffic on the call; ROGUE means that traffic was detected; CLEAN means that no traffic was detected |
| 1.3.6.1.4.1.10950.1.1.17.1.1.11 | ColumnedrQLPerformGarbageCollection | read-write | current | Description |
| 1.3.6.1.4.1.10950.1.1.17.1.1.12 | ColumnerdQL2SrcMediaIpPort | read-only | current | Source Media IP port in opposite direction |
| 1.3.6.1.4.1.10950.1.1.17.1.1.13 | ColumnerdQL2DestMediaAnchorIpPort | read-only | current | opposite flow's media anchor IP port |
| 1.3.6.1.4.1.10950.1.1.17.1.1.14 | ColumnerdQL2DestMediaIpPort | read-only | current | Opposite flow's destination media IP port |
| 1.3.6.1.4.1.10950.1.1.17.2 | ScalaredrGarbageCollectionState | read-only | current | Garbage collection state: In Progress, Success |
| 1.3.6.1.4.1.10950.1.1.17.3 | ScalaredrLastGarbageCollection | read-only | current | Date/time of last garbage collection |
| 1.3.6.1.4.1.10950.1.1.17.4 | ScalaredrNextTrafficCheck | read-only | current | Date/time of next check for traffic on each call in the quarantine list |
| 1.3.6.1.4.1.10950.1.1.17.5 | ScalaredrPerformGarbageCollection | read-write | current | This OID is used to command the nCite to perform EDR garbage collection |
| 1.3.6.1.4.1.10950.1.1.17.6 | ScalaredrGarbageCollectionStatus | read-only | current | Return status associated with last perform garbage collection request |
| 1.3.6.1.4.1.10950.1.1.17.7 | NotificationedrGarbageCollectionComplete | current | Description | |
| 1.3.6.1.4.1.10950.1.1.17.8 | ScalaredrGarbageCollectionCompleteTrapAck | read-write | current | Description |
| 1.3.6.1.4.1.10950.1.1.17.9 | TablelrdTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.17.9.1 | RowlrdEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.17.9.1.1 | ColumnlrdUniqueId | read-only | current | Unique identifier for the call |
| 1.3.6.1.4.1.10950.1.1.17.9.1.2 | ColumnlrdCallId | read-only | current | Call ID |
| 1.3.6.1.4.1.10950.1.1.17.9.1.3 | ColumnlrdRequestURI | read-only | current | Request-URI |
| 1.3.6.1.4.1.10950.1.1.17.9.1.4 | ColumnlrdFrom | read-only | current | From |
| 1.3.6.1.4.1.10950.1.1.17.9.1.5 | ColumnlrdTo | read-only | current | To |
| 1.3.6.1.4.1.10950.1.1.17.9.1.6 | ColumnlrdCallerState | read-only | current | Rogue/Clean |
| 1.3.6.1.4.1.10950.1.1.17.9.1.7 | ColumnlrdCallerMediaAnchorIPPort | read-only | current | Media Anchor IP address and port |
| 1.3.6.1.4.1.10950.1.1.17.9.1.8 | ColumnlrdCallerDestIPPort | read-only | current | Caller Destination IP address/port |
| 1.3.6.1.4.1.10950.1.1.17.9.1.9 | ColumnlrdCallerSourceIPPort1 | read-only | current | Caller IP address/Port |
| 1.3.6.1.4.1.10950.1.1.17.9.1.10 | ColumnlrdCallerSourceIPPort2 | read-only | current | Caller Source IP address/Port |
| 1.3.6.1.4.1.10950.1.1.17.9.1.11 | ColumnlrdCallerReason | read-only | current | Caller Reason |
| 1.3.6.1.4.1.10950.1.1.17.9.1.12 | ColumnlrdCallerTimeDetect | read-only | current | Caller Time of Rogue Detection |
| 1.3.6.1.4.1.10950.1.1.17.9.1.13 | ColumnlrdCalleeState | read-only | current | Rogue/Clean |
| 1.3.6.1.4.1.10950.1.1.17.9.1.14 | ColumnlrdCalleeMediaAnchorIPPort | read-only | current | Callee Media Achor IP adress/Port |
| 1.3.6.1.4.1.10950.1.1.17.9.1.15 | ColumnlrdCalleeDestIPPort | read-only | current | Callee Destination IP address/Port |
| 1.3.6.1.4.1.10950.1.1.17.9.1.16 | ColumnlrdCalleeSourceIPPort1 | read-only | current | Callee Source IP Address/Port 1 |
| 1.3.6.1.4.1.10950.1.1.17.9.1.17 | ColumnlrdCalleeSourceIPPort2 | read-only | current | Callee Source IP Address/Port 2 |
| 1.3.6.1.4.1.10950.1.1.17.9.1.18 | ColumnlrdCalleeReason | read-only | current | Callee Reason |
| 1.3.6.1.4.1.10950.1.1.17.9.1.19 | ColumnlrdCalleeTimeDetect | read-only | current | Callee Time of rogue detection |
| 1.3.6.1.4.1.10950.1.1.17.10 | ScalaredrGarbageCollectionCompleteTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.18 | NodelicenseInfo | |||
| 1.3.6.1.4.1.10950.1.1.18.1 | TablelicenseTable | not-accessible | current | Description |
| 1.3.6.1.4.1.10950.1.1.18.1.1 | RowlicenseEntry | not-accessible | current | Name value pair that describes the feature licensed |
| 1.3.6.1.4.1.10950.1.1.18.1.1.1 | ColumnlicenseIndex | read-only | current | Column Description |
| 1.3.6.1.4.1.10950.1.1.18.1.1.2 | ColumnlicenseFeatureName | read-only | deprecated | Encumerated value that can be used to translate into a descriptive name of feature that was licensed |
| 1.3.6.1.4.1.10950.1.1.18.1.1.3 | ColumnlicenseValue | read-only | current | Value associated with licensed feature. If the license is just to enable/disable, the value for enable = 1, the value for disable = 2. |
| 1.3.6.1.4.1.10950.1.1.18.1.1.4 | ColumnlicenseInstallDate | read-only | current | Date/time that the license was installed |
| 1.3.6.1.4.1.10950.1.1.18.1.1.5 | ColumnlicenseExpirationDate | read-only | current | Date/time that the license will expire. This field is currently not used. |
| 1.3.6.1.4.1.10950.1.1.18.1.1.6 | ColumnlicenseFeatureDisplayName | read-only | current | The display name for the feature |
| 1.3.6.1.4.1.10950.1.1.18.2 | ScalarlicenseFileName | read-only | current | Name of the license file on the nCite |
| 1.3.6.1.4.1.10950.1.1.18.3 | NotificationlicenseFileChangeTrap | current | This trap is sent whenever a new license file is loaded onto the nCite | |
| 1.3.6.1.4.1.10950.1.1.18.4 | ScalarlicenseFileChangeTrapAck | read-write | current | This OID is used to acknowledge the receipt of the license file change trap. |
| 1.3.6.1.4.1.10950.1.1.18.5 | ScalarlicenseFileChangeTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.19 | NodenCiteRIPConfig | |||
| 1.3.6.1.4.1.10950.1.1.19.1 | ScalarnCiteRipState | read-only | current | State of RIP on the nCite; off = RIP is not running; on = RIP is running |
| 1.3.6.1.4.1.10950.1.1.19.2 | TablenCiteRipPortConfigTable | not-accessible | current | Ports are specified as primary or secondary |
| 1.3.6.1.4.1.10950.1.1.19.2.1 | RownCiteRipPortConfigEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.19.2.1.1 | ColumnnCiteRipPortSlotNum | read-only | current | Card slot |
| 1.3.6.1.4.1.10950.1.1.19.2.1.2 | ColumnnCiteRipPortNum | read-write | current | Port ID |
| 1.3.6.1.4.1.10950.1.1.19.2.1.3 | ColumnnCiteRipPortPrimary | read-only | current | Port is either primary or secondary |
| 1.3.6.1.4.1.10950.1.1.19.3 | TablenCiteRipInterfacesTable | not-accessible | current | This table is the list of interfaces on which RIP is enabled |
| 1.3.6.1.4.1.10950.1.1.19.3.1 | RownCiteRipInterfacesEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.19.3.1.1 | ColumnnCiteRipInterafacesSlotNum | read-only | current | Slot Number |
| 1.3.6.1.4.1.10950.1.1.19.3.1.2 | ColumnnCiteRipInterfacesPortNum | read-only | current | Port number |
| 1.3.6.1.4.1.10950.1.1.19.3.1.3 | ColumnnCiteRipInterfacesIPAddr | read-only | current | IP address for which RIP is enabed |
| 1.3.6.1.4.1.10950.1.1.20 | NodenCiteAuthConfig | |||
| 1.3.6.1.4.1.10950.1.1.20.1 | ScalarauthConfigLocalOverride | read-only | current | Local override is used to have a different RADIUS server configuration than the EMS |
| 1.3.6.1.4.1.10950.1.1.20.2 | ScalarauthConfigRadiusRetryCount | read-only | current | Number of retries for RADIUS Server communications |
| 1.3.6.1.4.1.10950.1.1.20.3 | ScalarauthConfigRadiusRetryInterval | read-only | current | Number of seconds to wait for RADIUS Server response |
| 1.3.6.1.4.1.10950.1.1.20.4 | TableauthConfigRadiusServersTable | not-accessible | current | Table containing the list of RADIUS servers configured on the nCite |
| 1.3.6.1.4.1.10950.1.1.20.4.1 | RowauthConfigRadiusServersEntry | not-accessible | current | Row Description |
| 1.3.6.1.4.1.10950.1.1.20.4.1.1 | ColumnauthConfigRadiusServerIp | read-only | current | IP address of RADIUS Server |
| 1.3.6.1.4.1.10950.1.1.20.4.1.2 | ColumnauthConfigRadiusServerPort | read-only | current | RADIUS Server's Port |
| 1.3.6.1.4.1.10950.1.1.20.4.1.3 | ColumnauthConfigRadiusServerPriority | read-only | current | Priority (order) with which the RADIUS Server is used for user authentication. |
| 1.3.6.1.4.1.10950.1.1.21 | ScalarlinkUpTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.1.1.22 | ScalarlinkDownTrapAckSource | read-write | current | Identifies the Snmp Manager which sets the trap ack. |
| 1.3.6.1.4.1.10950.3 | NodenrObjectIDs | |||
| 1.3.6.1.4.1.10950.3.1 | NodenrSessionBorderController | |||
| 1.3.6.1.4.1.10950.3.1.1 | NodenrSBCSE | |||
| 1.3.6.1.4.1.10950.3.1.1.1 | NodenrSBCwNcp | |||
| 1.3.6.1.4.1.10950.3.1.1.2 | NodenrSBCwNte | |||
| 1.3.6.1.4.1.10950.3.1.2 | NodenrSBCDE |