Nortel-Magellan-Passport-ApsMIB
87 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Integer32 PassportCounter64 RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString FixedPoint1 Hex Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.134 | Nodeaps | |||
| 1.3.6.1.4.1.562.2.4.1.134.1 | TableapsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of aps components. |
| 1.3.6.1.4.1.562.2.4.1.134.1.1 | RowapsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single aps component. |
| 1.3.6.1.4.1.562.2.4.1.134.1.1.1 | ColumnapsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of aps components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.134.1.1.2 | ColumnapsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.134.1.1.4 | ColumnapsStorageType | read-only | mandatory | This variable represents the storage type value for the aps tables. |
| 1.3.6.1.4.1.562.2.4.1.134.1.1.10 | ColumnapsIndex | not-accessible | mandatory | This variable represents the index for the aps tables. |
| 1.3.6.1.4.1.562.2.4.1.134.2 | NodeapsTest | |||
| 1.3.6.1.4.1.562.2.4.1.134.2.1 | TableapsTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of apsTest components. |
| 1.3.6.1.4.1.562.2.4.1.134.2.1.1 | RowapsTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single apsTest component. |
| 1.3.6.1.4.1.562.2.4.1.134.2.1.1.1 | ColumnapsTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of apsTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.134.2.1.1.2 | ColumnapsTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.134.2.1.1.4 | ColumnapsTestStorageType | read-only | mandatory | This variable represents the storage type value for the apsTest tables. |
| 1.3.6.1.4.1.562.2.4.1.134.2.1.1.10 | ColumnapsTestIndex | not-accessible | mandatory | This variable represents the index for the apsTest tables. |
| 1.3.6.1.4.1.562.2.4.1.134.2.10 | TableapsTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.134.2.10.1 | RowapsTestStateEntry | not-accessible | mandatory | An entry in the apsTestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.134.2.10.1.1 | ColumnapsTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.134.2.10.1.2 | ColumnapsTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.134.2.10.1.3 | ColumnapsTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.134.2.11 | TableapsTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1 | RowapsTestSetupEntry | not-accessible | mandatory | An entry in the apsTestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1.1 | ColumnapsTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1.2 | ColumnapsTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1.3 | ColumnapsTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1.4 | ColumnapsTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1.5 | ColumnapsTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1.6 | ColumnapsTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1.7 | ColumnapsTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.134.2.11.1.8 | ColumnapsTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.134.2.12 | TableapsTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1 | RowapsTestResultsEntry | not-accessible | mandatory | An entry in the apsTestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.1 | ColumnapsTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.2 | ColumnapsTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.3 | ColumnapsTestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.4 | ColumnapsTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.5 | ColumnapsTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.6 | ColumnapsTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.7 | ColumnapsTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.8 | ColumnapsTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.9 | ColumnapsTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.10 | ColumnapsTestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.134.2.12.1.11 | ColumnapsTestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.134.10 | TableapsCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.134.10.1 | RowapsCidDataEntry | not-accessible | mandatory | An entry in the apsCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.134.10.1.1 | ColumnapsCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.134.11 | TableapsProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the Aps component. |
| 1.3.6.1.4.1.562.2.4.1.134.11.1 | RowapsProvEntry | not-accessible | mandatory | An entry in the apsProvTable. |
| 1.3.6.1.4.1.562.2.4.1.134.11.1.1 | ColumnapsApplicationFramerName | read-write | mandatory | This attribute is a link to the service component which utilizes the protected Sonet or Sdh interface managed by the Aps component. |
| 1.3.6.1.4.1.562.2.4.1.134.11.1.2 | ColumnapsWorkingLine | read-write | mandatory | This attribute is a link to the Path component whose parent Sonet or Sdh component will provide the Aps' working line. It must be defined. If the protectionLin… |
| 1.3.6.1.4.1.562.2.4.1.134.11.1.3 | ColumnapsProtectionLine | read-write | mandatory | This attribute is a link to the Path component whose parent Sonet or Sdh component will provide the Aps' protection line. It must be defined. This attribute is… |
| 1.3.6.1.4.1.562.2.4.1.134.11.1.4 | ColumnapsMode | read-write | mandatory | This attribute specifies the protection mode to use. It has possible values of unidirectional and bidirectional. The unidirectional mode allows the Aps to deci… |
| 1.3.6.1.4.1.562.2.4.1.134.11.1.5 | ColumnapsRevertive | read-write | mandatory | This attribute specifies whether revertive switching is to be used. It has possible values of no or yes. When this attribute is no, the Aps will not revert the… |
| 1.3.6.1.4.1.562.2.4.1.134.11.1.6 | ColumnapsHoldOffTime | read-write | mandatory | The hold off time is the delay between the detection of a Signal Fail or Signal Degrade on the active line and the initiation of a switchover. |
| 1.3.6.1.4.1.562.2.4.1.134.11.1.7 | ColumnapsWaitToRestorePeriod | read-write | mandatory | This attribute specifies the time during which the protection line will remain the receive active line after the working line recovers from the fault that caus… |
| 1.3.6.1.4.1.562.2.4.1.134.11.1.8 | ColumnapsSignalDegradeRatio | read-write | mandatory | This attribute specifies the minimum bit error ratio (BER) for which a Signal Degrade failure is declared. Its value is the exponent of the BER, with possible … |
| 1.3.6.1.4.1.562.2.4.1.134.12 | TableapsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.134.12.1 | RowapsStateEntry | not-accessible | mandatory | An entry in the apsStateTable. |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.1 | ColumnapsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.2 | ColumnapsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.3 | ColumnapsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.4 | ColumnapsAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.5 | ColumnapsProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.6 | ColumnapsControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.7 | ColumnapsAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.8 | ColumnapsStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.134.12.1.9 | ColumnapsUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.134.13 | TableapsOperTable | not-accessible | mandatory | This group contains the operational attributes for the Aps component. |
| 1.3.6.1.4.1.562.2.4.1.134.13.1 | RowapsOperEntry | not-accessible | mandatory | An entry in the apsOperTable. |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.1 | ColumnapsNearEndRxActiveLine | read-only | mandatory | This attribute indicates which near end line is active for receiving data from the far end. |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.2 | ColumnapsNearEndRequest | read-only | mandatory | This attribute indicates the request currently being transmitted to the far end in the SONET/SDH line overhead K1 byte of the protection line. Requests are pri… |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.3 | ColumnapsNearEndRequestChannel | read-only | mandatory | This attribute indicates to which channel the nearEndRequest applies. |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.4 | ColumnapsFarEndRequest | read-only | mandatory | This attribute indicates the request currently being received from the far end in the SONET/SDH line overhead K1 byte of the protection line. Requests are prio… |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.5 | ColumnapsFarEndRequestChannel | read-only | mandatory | This attribute indicates to which channel the farEndRequest applies. |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.6 | ColumnapsSdOnLines | read-only | mandatory | This attribute indicates which lines (if any) are currently experiencing a Signal Degrade (SD). Description of bits: protection(0) working(1) |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.7 | ColumnapsSwitchovers | read-only | mandatory | This attributes counts the number of times that a switchover of the active line has occurred since the Aps component was became active. |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.8 | ColumnapsTimeUntilRestore | read-only | mandatory | This attribute indicates the amount of time in minutes until the receive active line is automatically switched back from the protection line to the working lin… |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.9 | ColumnapsProtocolFailureAlarm | read-only | mandatory | This attribute indicates whether the Aps component is experiencing an APS protocol failure alarm. Protocol failure alarms include the protection switching byte… |
| 1.3.6.1.4.1.562.2.4.1.134.13.1.10 | ColumnapsModeMismatchAlarm | read-only | mandatory | This attribute indicates whether the Aps component is experiencing an APS mode mismatch alarm (code 7011 5272). This alarm indicates either: (1) that the far e… |
| 1.3.6.1.4.1.562.2.4.2.136 | NodeapsMIB | |||
| 1.3.6.1.4.1.562.2.4.2.136.1 | NodeapsGroup | |||
| 1.3.6.1.4.1.562.2.4.2.136.1.6 | NodeapsGroupBF | |||
| 1.3.6.1.4.1.562.2.4.2.136.1.6.1 | NodeapsGroupBF00 | |||
| 1.3.6.1.4.1.562.2.4.2.136.1.6.1.2 | NodeapsGroupBF00A | |||
| 1.3.6.1.4.1.562.2.4.2.136.3 | NodeapsCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.136.3.6 | NodeapsCapabilitiesBF | |||
| 1.3.6.1.4.1.562.2.4.2.136.3.6.1 | NodeapsCapabilitiesBF00 | |||
| 1.3.6.1.4.1.562.2.4.2.136.3.6.1.2 | NodeapsCapabilitiesBF00A |