Nortel-Magellan-Passport-AtmTrunksMIB
47 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.60.3 | NodetrkAtm | |||
| 1.3.6.1.4.1.562.2.4.1.60.3.1 | TabletrkAtmRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of trkAtm components. |
| 1.3.6.1.4.1.562.2.4.1.60.3.1.1 | RowtrkAtmRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single trkAtm component. |
| 1.3.6.1.4.1.562.2.4.1.60.3.1.1.1 | ColumntrkAtmRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of trkAtm components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.60.3.1.1.2 | ColumntrkAtmComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.60.3.1.1.4 | ColumntrkAtmStorageType | read-only | mandatory | This variable represents the storage type value for the trkAtm tables. |
| 1.3.6.1.4.1.562.2.4.1.60.3.1.1.10 | ColumntrkAtmIndex | not-accessible | mandatory | This variable represents the index for the trkAtm tables. |
| 1.3.6.1.4.1.562.2.4.1.60.3.10 | TabletrkAtmProvTable | not-accessible | mandatory | This group of provisionable attributes contains the parameters used by AtmAccess for monitoring link quality. |
| 1.3.6.1.4.1.562.2.4.1.60.3.10.1 | RowtrkAtmProvEntry | not-accessible | mandatory | An entry in the trkAtmProvTable. |
| 1.3.6.1.4.1.562.2.4.1.60.3.10.1.1 | ColumntrkAtmMaximumErroredInterval | read-write | obsolete | This attribute specifies the interval time over which the error threshold (as specified by receiveErrorSensitivity) must be continuously exceeded before the Un… |
| 1.3.6.1.4.1.562.2.4.1.60.3.10.1.2 | ColumntrkAtmReceiveErrorSensitivity | read-write | mandatory | This attribute specifies the allowable error rate beyond which the AtmAccess component can be degraded if the error rate persists for a duration longer than th… |
| 1.3.6.1.4.1.562.2.4.1.60.3.10.1.3 | ColumntrkAtmAtmAccMaximumErroredInterval | read-write | mandatory | This attribute specifies the interval time over which the error threshold (as specified by receiveErrorSensitivity) must be continuously exceeded before the At… |
| 1.3.6.1.4.1.562.2.4.1.60.3.11 | TabletrkAtmInterfaceTable | not-accessible | mandatory | This group of attributes provides the parameters used by the AtmAccess component for specifying access to an ATM interface. |
| 1.3.6.1.4.1.562.2.4.1.60.3.11.1 | RowtrkAtmInterfaceEntry | not-accessible | mandatory | An entry in the trkAtmInterfaceTable. |
| 1.3.6.1.4.1.562.2.4.1.60.3.11.1.1 | ColumntrkAtmAtmConnection | read-write | mandatory | This attribute specifies the component name of the ATM Layer 2 AAL5 interface that the AtmAccess component will use. |
| 1.3.6.1.4.1.562.2.4.1.60.3.11.1.2 | ColumntrkAtmBwElastic | read-write | mandatory | This attribute specifies how changes in the bandwidth of the atmConnection are handled by the ATM software. If its value is no, the atmConnection will be relea… |
| 1.3.6.1.4.1.562.2.4.1.60.3.11.1.3 | ColumntrkAtmVccReportingBw | read-write | mandatory | This attribute specifies how the bandwidth of the VCC is reported to the parent Trunk component. If its value is pcr and attribute bwElastic of AtmAccess has a… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12 | TabletrkAtmStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1 | RowtrkAtmStateEntry | not-accessible | mandatory | An entry in the trkAtmStateTable. |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.1 | ColumntrkAtmAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.2 | ColumntrkAtmOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.3 | ColumntrkAtmUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.4 | ColumntrkAtmAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.5 | ColumntrkAtmProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.6 | ColumntrkAtmControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.7 | ColumntrkAtmAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.8 | ColumntrkAtmStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.60.3.12.1.9 | ColumntrkAtmUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.60.3.14 | TabletrkAtmUtilTable | not-accessible | mandatory | This group contains all of the provisioning data required to set the ATM VCC utilization alarm thresholds. The ATM VCC utilization is indicated by the lastCalc… |
| 1.3.6.1.4.1.562.2.4.1.60.3.14.1 | RowtrkAtmUtilEntry | not-accessible | mandatory | An entry in the trkAtmUtilTable. |
| 1.3.6.1.4.1.562.2.4.1.60.3.14.1.1 | ColumntrkAtmMinorVccUtilAlarmThreshold | read-write | mandatory | This attribute specifies the threshold value at which a minor alarm will be issued based on a sustained average ATM VCC utilization as indicated by the lastCal… |
| 1.3.6.1.4.1.562.2.4.1.60.3.14.1.2 | ColumntrkAtmMajorVccUtilAlarmThreshold | read-write | mandatory | This attribute specifies the threshold value at which a major alarm will be issued based on a sustained average ATM VCC utilization as indicated by the lastCal… |
| 1.3.6.1.4.1.562.2.4.1.60.3.14.1.3 | ColumntrkAtmCriticalVccUtilAlarmThreshold | read-write | mandatory | This attribute specifies the threshold value at which a critical alarm will be issued based on a sustained average ATM VCC utilization as indicated by the last… |
| 1.3.6.1.4.1.562.2.4.1.60.3.14.1.4 | ColumntrkAtmVccUtilAlarmStatus | read-write | mandatory | This attribute provides control of the generation of ATM VCC utilization alarms. If the value is disabled, none of the alarms is generated (this is equivalent … |
| 1.3.6.1.4.1.562.2.4.1.60.3.15 | TabletrkAtmStatsTable | not-accessible | mandatory | This group of attributes contains statistics collected by the AtmAccess component. |
| 1.3.6.1.4.1.562.2.4.1.60.3.15.1 | RowtrkAtmStatsEntry | not-accessible | mandatory | An entry in the trkAtmStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.60.3.15.1.1 | ColumntrkAtmLastCalculatedVccUtilization | read-only | mandatory | This attribute indicates the last calculated receive utilization of the ATM VCC. It is calculated every 30 seconds based on comparing the number of cells recei… |
| 1.3.6.1.4.1.562.2.4.1.60.3.15.1.2 | ColumntrkAtmLastCalculatedTxVccUtilization | read-only | mandatory | This attribute indicates the last calculated transmit utilization of the ATM VCC. It is calculated every 30 seconds based on comparing the number of cells tran… |
| 1.3.6.1.4.1.562.2.4.2.59 | NodeatmTrunksMIB | |||
| 1.3.6.1.4.1.562.2.4.2.59.1 | NodeatmTrunksGroup | |||
| 1.3.6.1.4.1.562.2.4.2.59.1.5 | NodeatmTrunksGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.59.1.5.2 | NodeatmTrunksGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.59.1.5.2.2 | NodeatmTrunksGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.59.3 | NodeatmTrunksCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.59.3.5 | NodeatmTrunksCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.59.3.5.2 | NodeatmTrunksCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.59.3.5.2.2 | NodeatmTrunksCapabilitiesBE01A |