Nortel-Magellan-Passport-BitTransparentMIB
212 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex PassportCounter64 RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString EnterpriseDateAndTime Hex Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.81 | Nodebtds | |||
| 1.3.6.1.4.1.562.2.4.1.81.1 | TablebtdsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of btds components. |
| 1.3.6.1.4.1.562.2.4.1.81.1.1 | RowbtdsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single btds component. |
| 1.3.6.1.4.1.562.2.4.1.81.1.1.1 | ColumnbtdsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of btds components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.81.1.1.2 | ColumnbtdsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.81.1.1.4 | ColumnbtdsStorageType | read-only | mandatory | This variable represents the storage type value for the btds tables. |
| 1.3.6.1.4.1.562.2.4.1.81.1.1.10 | ColumnbtdsIndex | not-accessible | mandatory | This variable represents the index for the btds tables. |
| 1.3.6.1.4.1.562.2.4.1.81.2 | NodebtdsFramer | |||
| 1.3.6.1.4.1.562.2.4.1.81.2.1 | TablebtdsFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of btdsFramer components. |
| 1.3.6.1.4.1.562.2.4.1.81.2.1.1 | RowbtdsFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single btdsFramer component. |
| 1.3.6.1.4.1.562.2.4.1.81.2.1.1.1 | ColumnbtdsFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of btdsFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.81.2.1.1.2 | ColumnbtdsFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.81.2.1.1.4 | ColumnbtdsFramerStorageType | read-only | mandatory | This variable represents the storage type value for the btdsFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.81.2.1.1.10 | ColumnbtdsFramerIndex | not-accessible | mandatory | This variable represents the index for the btdsFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.81.2.10 | TablebtdsFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.81.2.10.1 | RowbtdsFramerProvEntry | not-accessible | mandatory | An entry in the btdsFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.81.2.10.1.1 | ColumnbtdsFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.81.2.11 | TablebtdsFramerChannelTable | not-accessible | mandatory | This group contains attributes defining the framing of data on the link interface or n*64kbps channel. |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1 | RowbtdsFramerChannelEntry | not-accessible | mandatory | An entry in the btdsFramerChannelTable. |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1.7 | ColumnbtdsFramerProtocol | read-write | mandatory | This attribute specifies the ingress frames suppressed by this Btds. If protocol is none, this Btds does not suppress any ingress frames. If protocol is hdlc, … |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1.8 | ColumnbtdsFramerNumOfIdleBytesToMonitor | read-write | mandatory | This attribute specifies the number of consecutive repeated ingress 16-bit words this Btds must encounter before suppressing universal ingress idle frames. Thi… |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1.9 | ColumnbtdsFramerIdlePattern | read-write | mandatory | This attribute specifies how to fill a local egress frame when the remote Btds suppressed an ingress frame. |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1.10 | ColumnbtdsFramerTimeSlotAlignment | read-write | mandatory | This attribute specifies the time slot alignment of this Btds. With time slot alignment, data sent out on a particular time slot to a link is received on the s… |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1.11 | ColumnbtdsFramerInsertedOutputDelay | read-write | mandatory | This attribute defines the amount of added output delay to compensate for cross network delay variations. Cross network delay variations is a function of the n… |
| 1.3.6.1.4.1.562.2.4.1.81.2.11.1.12 | ColumnbtdsFramerBtdsCellSize | read-write | mandatory | This attribute allows selection of larger BTDS cell sizes. Larger BTDS cell sizes improve efficiency but increase the minimum egress queue delay. If the associ… |
| 1.3.6.1.4.1.562.2.4.1.81.2.12 | TablebtdsFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.81.2.12.1 | RowbtdsFramerStateEntry | not-accessible | mandatory | An entry in the btdsFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.81.2.12.1.1 | ColumnbtdsFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.81.2.12.1.2 | ColumnbtdsFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.81.2.12.1.3 | ColumnbtdsFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.81.2.13 | TablebtdsFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.81.2.13.1 | RowbtdsFramerStatsEntry | not-accessible | mandatory | An entry in the btdsFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.81.2.13.1.1 | ColumnbtdsFramerFrmFromIf | read-only | mandatory | This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.2.13.1.3 | ColumnbtdsFramerSuppressedFrames | read-only | mandatory | This attribute counts the number of frames dropped at the interface due to the idle pattern being detected. This count wraps to zero after reaching its maximum… |
| 1.3.6.1.4.1.562.2.4.1.81.2.13.1.4 | ColumnbtdsFramerFrmToIf | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.2.13.1.5 | ColumnbtdsFramerLrcErrors | read-only | mandatory | This attribute counts the number of frames received from the network with LRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.2.13.1.6 | ColumnbtdsFramerFrmLostInNetwork | read-only | mandatory | This attribute counts the number of frames which the service knows it did not receive from the network although they were sent in to the network from the far e… |
| 1.3.6.1.4.1.562.2.4.1.81.2.13.1.7 | ColumnbtdsFramerFrmUnderRuns | read-only | mandatory | This attribute counts the number of times that a frame was needed but was not available because it had been delayed too long in the network. This error may occ… |
| 1.3.6.1.4.1.562.2.4.1.81.2.13.1.8 | ColumnbtdsFramerFrmDumped | read-only | mandatory | This attribute counts the number of frames which have been dumped because the local interface output queue grew too large. This can occur if the clock rate on … |
| 1.3.6.1.4.1.562.2.4.1.81.3 | NodebtdsPlc | |||
| 1.3.6.1.4.1.562.2.4.1.81.3.1 | TablebtdsPlcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of btdsPlc components. |
| 1.3.6.1.4.1.562.2.4.1.81.3.1.1 | RowbtdsPlcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single btdsPlc component. |
| 1.3.6.1.4.1.562.2.4.1.81.3.1.1.1 | ColumnbtdsPlcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of btdsPlc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.81.3.1.1.2 | ColumnbtdsPlcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.81.3.1.1.4 | ColumnbtdsPlcStorageType | read-only | mandatory | This variable represents the storage type value for the btdsPlc tables. |
| 1.3.6.1.4.1.562.2.4.1.81.3.1.1.10 | ColumnbtdsPlcIndex | not-accessible | mandatory | This variable represents the index for the btdsPlc tables. |
| 1.3.6.1.4.1.562.2.4.1.81.3.10 | TablebtdsPlcProvTable | not-accessible | mandatory | This group contains all provisionable attributes for a permanent logical connection. Note that all of the attributes are valid and provisionable on both ends o… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1 | RowbtdsPlcProvEntry | not-accessible | mandatory | An entry in the btdsPlcProvTable. |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.2 | ColumnbtdsPlcRemoteName | read-write | mandatory | This attribute is the PLC's remote end point's address in the format of a Passport component name The syntax of a component is: 'em/node type/instance'. End po… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.3 | ColumnbtdsPlcSetupPriority | read-write | mandatory | This attribute gives the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS establishes a path through the… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.4 | ColumnbtdsPlcHoldingPriority | read-write | mandatory | This attribute gives the priority that a path holds once it is established. Zero(0) is the highest priority and four(4) is the lowest. A path's holdingPriority… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.5 | ColumnbtdsPlcRequiredTxBandwidth | read-write | mandatory | This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route. This attribute represents the bandwidth for traf… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.6 | ColumnbtdsPlcRequiredRxBandwidth | read-write | mandatory | This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute represents the bandwidth for traffic … |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.7 | ColumnbtdsPlcRequiredTrafficType | read-write | mandatory | This attribute indicates the type of traffic transmitted over the path. There are eight(8) possible traffic types, and the path can transmit only one of them. … |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.8 | ColumnbtdsPlcPermittedTrunkTypes | read-write | mandatory | This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have been defined, leaving six(6) r… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.9 | ColumnbtdsPlcRequiredSecurity | read-write | mandatory | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secu… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.10 | ColumnbtdsPlcRequiredCustomerParm | read-write | mandatory | This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to seven, is chosen by network admini… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.11 | ColumnbtdsPlcPathAttributeToMinimize | read-write | mandatory | This attribute indicates whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and a delay metric associated with… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.12 | ColumnbtdsPlcMaximumAcceptableCost | read-write | mandatory | This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the route. The cost metric is the … |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.13 | ColumnbtdsPlcMaximumAcceptableDelay | read-write | mandatory | This attribute indicates an upper bound on the delay of a route, which is the sum of the delay of all trunks on the route. It should be provisioned with a reas… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.14 | ColumnbtdsPlcEmissionPriority | read-write | mandatory | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of Zero(0) indicates the highest e… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.15 | ColumnbtdsPlcDiscardPriority | read-write | mandatory | This attribute indicates the importance of the packets on the path. One is used for paths carrying the most important traffic, and three is used for paths carr… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.16 | ColumnbtdsPlcPathType | read-write | mandatory | This attribute specifies if the path for this PLC is determined automatically or by static provisioning. The default (normal) is to automatically choose a rout… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.17 | ColumnbtdsPlcPathFailureAction | read-write | mandatory | This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is selected. If disconnectConnection i… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.18 | ColumnbtdsPlcBumpPreference | read-write | mandatory | This attribute controls when bumping occurs in the route selection process. A connection with higher (numerically less) setupPriority may bump a connection wit… |
| 1.3.6.1.4.1.562.2.4.1.81.3.10.1.19 | ColumnbtdsPlcOptimization | read-write | mandatory | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as op… |
| 1.3.6.1.4.1.562.2.4.1.81.3.262 | TablebtdsPlcMpathTable | not-accessible | mandatory | This attribute is optional and specifies the sequence of trunks to be used as the route for the path, thus bypassing PORS' automatic route selection. If the pa… |
| 1.3.6.1.4.1.562.2.4.1.81.3.262.1 | RowbtdsPlcMpathEntry | not-accessible | mandatory | An entry in the btdsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.81.3.262.1.1 | ColumnbtdsPlcMpathIndex | not-accessible | mandatory | This variable represents the btdsPlcMpathTable specific index for the btdsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.81.3.262.1.2 | ColumnbtdsPlcMpathValue | read-write | mandatory | This variable represents an individual value for the btdsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.81.4 | NodebtdsLCo | |||
| 1.3.6.1.4.1.562.2.4.1.81.4.1 | TablebtdsLCoRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of btdsLCo components. |
| 1.3.6.1.4.1.562.2.4.1.81.4.1.1 | RowbtdsLCoRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single btdsLCo component. |
| 1.3.6.1.4.1.562.2.4.1.81.4.1.1.1 | ColumnbtdsLCoRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of btdsLCo components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.81.4.1.1.2 | ColumnbtdsLCoComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.81.4.1.1.4 | ColumnbtdsLCoStorageType | read-only | mandatory | This variable represents the storage type value for the btdsLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.81.4.1.1.10 | ColumnbtdsLCoIndex | not-accessible | mandatory | This variable represents the index for the btdsLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.81.4.10 | TablebtdsLCoPathDataTable | not-accessible | mandatory | This group contains all operational attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1 | RowbtdsLCoPathDataEntry | not-accessible | mandatory | An entry in the btdsLCoPathDataTable. |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.1 | ColumnbtdsLCoState | read-only | mandatory | This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end provisioned or the application ha… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.2 | ColumnbtdsLCoOverrideRemoteName | read-write | mandatory | If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unloc… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.3 | ColumnbtdsLCoEnd | read-only | mandatory | This attribute identifies whether this is the calling or called end of the path. |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.4 | ColumnbtdsLCoCostMetric | read-only | mandatory | This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was est… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.5 | ColumnbtdsLCoDelayMetric | read-only | mandatory | This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the pa… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.6 | ColumnbtdsLCoRoundTripDelay | read-only | mandatory | This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.7 | ColumnbtdsLCoSetupPriority | read-only | mandatory | This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complem… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.8 | ColumnbtdsLCoHoldingPriority | read-only | mandatory | This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.9 | ColumnbtdsLCoRequiredTxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidt… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.10 | ColumnbtdsLCoRequiredRxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth fo… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.11 | ColumnbtdsLCoRequiredTrafficType | read-only | mandatory | This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one … |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.12 | ColumnbtdsLCoPermittedTrunkTypes | read-only | mandatory | This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terr… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.13 | ColumnbtdsLCoRequiredSecurity | read-only | mandatory | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secu… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.14 | ColumnbtdsLCoRequiredCustomerParameter | read-only | mandatory | This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer define… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.15 | ColumnbtdsLCoEmissionPriority | read-only | mandatory | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the e… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.16 | ColumnbtdsLCoDiscardPriority | read-only | mandatory | This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying t… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.17 | ColumnbtdsLCoPathType | read-only | mandatory | This attribute indicates whether the path for this PLC was determined automatically or by static provisioning. Normal pathTypes are selected automatically by R… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.18 | ColumnbtdsLCoRetryCount | read-only | mandatory | This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.19 | ColumnbtdsLCoPathFailureCount | read-only | mandatory | This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the path is up. If a path fails anytim… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.20 | ColumnbtdsLCoReasonForNoRoute | read-only | mandatory | This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-expla… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.21 | ColumnbtdsLCoLastTearDownReason | read-only | mandatory | This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This att… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.22 | ColumnbtdsLCoPathFailureAction | read-only | mandatory | This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is di… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.23 | ColumnbtdsLCoBumpPreference | read-only | mandatory | This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connect… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.24 | ColumnbtdsLCoOptimization | read-only | mandatory | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as op… |
| 1.3.6.1.4.1.562.2.4.1.81.4.10.1.25 | ColumnbtdsLCoPathUpDateTime | read-only | mandatory | This is the time stamp when the current path was established or reestablished. |
| 1.3.6.1.4.1.562.2.4.1.81.4.11 | TablebtdsLCoStatsTable | not-accessible | mandatory | This group contains the operational statistics attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.81.4.11.1 | RowbtdsLCoStatsEntry | not-accessible | mandatory | An entry in the btdsLCoStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.81.4.11.1.1 | ColumnbtdsLCoPktsToNetwork | read-only | mandatory | This attribute counts the number of packets transmitted to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.81.4.11.1.2 | ColumnbtdsLCoBytesToNetwork | read-only | mandatory | This attribute counts the number of bytes sent to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.81.4.11.1.3 | ColumnbtdsLCoPktsFromNetwork | read-only | mandatory | This attribute counts the number of packets received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.81.4.11.1.4 | ColumnbtdsLCoBytesFromNetwork | read-only | mandatory | This attribute counts the number of bytes received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.81.4.264 | TablebtdsLCoPathTable | not-accessible | mandatory | This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path. |
| 1.3.6.1.4.1.562.2.4.1.81.4.264.1 | RowbtdsLCoPathEntry | not-accessible | mandatory | An entry in the btdsLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.81.4.264.1.1 | ColumnbtdsLCoPathValue | read-only | mandatory | This variable represents both the value and the index for the btdsLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.81.5 | NodebtdsDpnss1 | |||
| 1.3.6.1.4.1.562.2.4.1.81.5.1 | TablebtdsDpnss1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of btdsDpnss1 components. |
| 1.3.6.1.4.1.562.2.4.1.81.5.1.1 | RowbtdsDpnss1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single btdsDpnss1 component. |
| 1.3.6.1.4.1.562.2.4.1.81.5.1.1.1 | ColumnbtdsDpnss1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of btdsDpnss1 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.81.5.1.1.2 | ColumnbtdsDpnss1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.81.5.1.1.4 | ColumnbtdsDpnss1StorageType | read-only | mandatory | This variable represents the storage type value for the btdsDpnss1 tables. |
| 1.3.6.1.4.1.562.2.4.1.81.5.1.1.10 | ColumnbtdsDpnss1Index | not-accessible | mandatory | This variable represents the index for the btdsDpnss1 tables. |
| 1.3.6.1.4.1.562.2.4.1.81.5.10 | TablebtdsDpnss1ProvTable | not-accessible | mandatory | This group contains the provisionable attribute for the Dpnss1 component to handle DPNSS 1 messages. |
| 1.3.6.1.4.1.562.2.4.1.81.5.10.1 | RowbtdsDpnss1ProvEntry | not-accessible | mandatory | An entry in the btdsDpnss1ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.81.5.10.1.1 | ColumnbtdsDpnss1TimeslotsX | read-write | mandatory | This attribute contains the list of timeslots that are provisioned X for call collision resolution. A timeslot not provisioned as X is assumed to be Y. Descrip… |
| 1.3.6.1.4.1.562.2.4.1.81.5.12 | TablebtdsDpnss1VdcdTable | not-accessible | mandatory | This group contains attributes which count the protocol messages indicating changes to operational modes of VoiceServices. |
| 1.3.6.1.4.1.562.2.4.1.81.5.12.1 | RowbtdsDpnss1VdcdEntry | not-accessible | mandatory | An entry in the btdsDpnss1VdcdTable. |
| 1.3.6.1.4.1.562.2.4.1.81.5.12.1.1 | ColumnbtdsDpnss1NewVoiceCalls | read-only | mandatory | This attribute counts the number of messages indicating beginning of establishment of a voice call. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.5.12.1.2 | ColumnbtdsDpnss1NewDataCalls | read-only | mandatory | This attribute counts the number of messages indicating beginning of establishment of a data call. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.5.12.1.3 | ColumnbtdsDpnss1VoiceToData | read-only | mandatory | This attribute counts the number of messages indicating a change of a call operational mode from voice transmission to data transmission. This count wraps to z… |
| 1.3.6.1.4.1.562.2.4.1.81.5.12.1.4 | ColumnbtdsDpnss1DataToVoice | read-only | mandatory | This attribute counts the number of messages indicating a change of a call operational mode from data transmission to voice transmission. This count wraps to z… |
| 1.3.6.1.4.1.562.2.4.1.81.5.12.1.5 | ColumnbtdsDpnss1CallClears | read-only | mandatory | This attribute counts the number of CCS messages indicating the end of a call. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.5.13 | TablebtdsDpnss1FramesTable | not-accessible | mandatory | This group contains attributes which count layer 2 frames potentially significant for voice/data call discrimination. See also the description of HdlcStatistic… |
| 1.3.6.1.4.1.562.2.4.1.81.5.13.1 | RowbtdsDpnss1FramesEntry | not-accessible | mandatory | An entry in the btdsDpnss1FramesTable. |
| 1.3.6.1.4.1.562.2.4.1.81.5.13.1.1 | ColumnbtdsDpnss1FrmProcessed | read-only | mandatory | This attribute counts the number of valid layer 2 frames containing an Information Field with a protocol message. Changes to operational mode of a VoiceService… |
| 1.3.6.1.4.1.562.2.4.1.81.5.13.1.2 | ColumnbtdsDpnss1FrmInvalid | read-only | mandatory | This attribute counts the number of invalid layer 2 frames For DPNSS 1, a frames is counted as invalid if - it is shorter than 3 octets or longer than 48 octet… |
| 1.3.6.1.4.1.562.2.4.1.81.5.14 | TablebtdsDpnss1HdlcTable | not-accessible | mandatory | This group contains attributes which count the signalling frame events. |
| 1.3.6.1.4.1.562.2.4.1.81.5.14.1 | RowbtdsDpnss1HdlcEntry | not-accessible | mandatory | An entry in the btdsDpnss1HdlcTable. |
| 1.3.6.1.4.1.562.2.4.1.81.5.14.1.2 | ColumnbtdsDpnss1FrmFromIf | read-only | mandatory | This attribute counts the number of all hdlc frames, correct or not, received from the PRI. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.5.14.1.3 | ColumnbtdsDpnss1Aborts | read-only | mandatory | This attribute counts the number of frame receptions aborted before completion, due to incoming frame format errors. This count wraps to zero after reaching it… |
| 1.3.6.1.4.1.562.2.4.1.81.5.14.1.4 | ColumnbtdsDpnss1CrcErrors | read-only | mandatory | This attribute counts the number of frames received with CRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.5.14.1.5 | ColumnbtdsDpnss1NonOctetErrors | read-only | mandatory | This attribute counts the number of frames received that were non octet aligned. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.5.14.1.6 | ColumnbtdsDpnss1Overruns | read-only | mandatory | This attribute counts the number of frames received for which overruns occurred. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.5.14.1.8 | ColumnbtdsDpnss1LargeFrmErrors | read-only | mandatory | This attribute counts the number of received frames which were longer than 1024 octets. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.5.286 | TablebtdsDpnss1TSlotTable | not-accessible | mandatory | This attribute displays the operational mode of every time slot which is serviced by a voice service. The value idle means that the time slot is not used to se… |
| 1.3.6.1.4.1.562.2.4.1.81.5.286.1 | RowbtdsDpnss1TSlotEntry | not-accessible | mandatory | An entry in the btdsDpnss1TSlotTable. |
| 1.3.6.1.4.1.562.2.4.1.81.5.286.1.1 | ColumnbtdsDpnss1TSlotIndex | not-accessible | mandatory | This variable represents the index for the btdsDpnss1TSlotTable. |
| 1.3.6.1.4.1.562.2.4.1.81.5.286.1.2 | ColumnbtdsDpnss1TSlotValue | read-only | mandatory | This variable represents an individual value for the btdsDpnss1TSlotTable. |
| 1.3.6.1.4.1.562.2.4.1.81.6 | NodebtdsMcdn | |||
| 1.3.6.1.4.1.562.2.4.1.81.6.1 | TablebtdsMcdnRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of btdsMcdn components. |
| 1.3.6.1.4.1.562.2.4.1.81.6.1.1 | RowbtdsMcdnRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single btdsMcdn component. |
| 1.3.6.1.4.1.562.2.4.1.81.6.1.1.1 | ColumnbtdsMcdnRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of btdsMcdn components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.81.6.1.1.2 | ColumnbtdsMcdnComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.81.6.1.1.4 | ColumnbtdsMcdnStorageType | read-only | mandatory | This variable represents the storage type value for the btdsMcdn tables. |
| 1.3.6.1.4.1.562.2.4.1.81.6.1.1.10 | ColumnbtdsMcdnIndex | not-accessible | mandatory | This variable represents the index for the btdsMcdn tables. |
| 1.3.6.1.4.1.562.2.4.1.81.6.10 | TablebtdsMcdnProvTable | not-accessible | mandatory | This group contains the provisionable attribute for the Mcdn component. |
| 1.3.6.1.4.1.562.2.4.1.81.6.10.1 | RowbtdsMcdnProvEntry | not-accessible | mandatory | An entry in the btdsMcdnProvTable. |
| 1.3.6.1.4.1.562.2.4.1.81.6.10.1.1 | ColumnbtdsMcdnAdjPbxSide | read-write | mandatory | This attribute holds the provisioning related to call collision resolution. Its value must be that same as in the adjacent PBX, at the other end of the PRI. To… |
| 1.3.6.1.4.1.562.2.4.1.81.6.12 | TablebtdsMcdnVdcdTable | not-accessible | mandatory | This group contains attributes which count the protocol messages indicating changes to operational modes of VoiceServices. |
| 1.3.6.1.4.1.562.2.4.1.81.6.12.1 | RowbtdsMcdnVdcdEntry | not-accessible | mandatory | An entry in the btdsMcdnVdcdTable. |
| 1.3.6.1.4.1.562.2.4.1.81.6.12.1.1 | ColumnbtdsMcdnNewVoiceCalls | read-only | mandatory | This attribute counts the number of messages indicating beginning of establishment of a voice call. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.6.12.1.2 | ColumnbtdsMcdnNewDataCalls | read-only | mandatory | This attribute counts the number of messages indicating beginning of establishment of a data call. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.6.12.1.3 | ColumnbtdsMcdnVoiceToData | read-only | mandatory | This attribute counts the number of messages indicating a change of a call operational mode from voice transmission to data transmission. This count wraps to z… |
| 1.3.6.1.4.1.562.2.4.1.81.6.12.1.4 | ColumnbtdsMcdnDataToVoice | read-only | mandatory | This attribute counts the number of messages indicating a change of a call operational mode from data transmission to voice transmission. This count wraps to z… |
| 1.3.6.1.4.1.562.2.4.1.81.6.12.1.5 | ColumnbtdsMcdnCallClears | read-only | mandatory | This attribute counts the number of CCS messages indicating the end of a call. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.6.13 | TablebtdsMcdnFramesTable | not-accessible | mandatory | This group contains attributes which count layer 2 frames potentially significant for voice/data call discrimination. See also the description of HdlcStatistic… |
| 1.3.6.1.4.1.562.2.4.1.81.6.13.1 | RowbtdsMcdnFramesEntry | not-accessible | mandatory | An entry in the btdsMcdnFramesTable. |
| 1.3.6.1.4.1.562.2.4.1.81.6.13.1.1 | ColumnbtdsMcdnFrmProcessed | read-only | mandatory | This attribute counts the number of valid layer 2 frames containing an Information Field with a protocol message. Changes to operational mode of a VoiceService… |
| 1.3.6.1.4.1.562.2.4.1.81.6.13.1.2 | ColumnbtdsMcdnFrmInvalid | read-only | mandatory | This attribute counts the number of invalid layer 2 frames For DPNSS 1, a frames is counted as invalid if - it is shorter than 3 octets or longer than 48 octet… |
| 1.3.6.1.4.1.562.2.4.1.81.6.14 | TablebtdsMcdnHdlcTable | not-accessible | mandatory | This group contains attributes which count the signalling frame events. |
| 1.3.6.1.4.1.562.2.4.1.81.6.14.1 | RowbtdsMcdnHdlcEntry | not-accessible | mandatory | An entry in the btdsMcdnHdlcTable. |
| 1.3.6.1.4.1.562.2.4.1.81.6.14.1.2 | ColumnbtdsMcdnFrmFromIf | read-only | mandatory | This attribute counts the number of all hdlc frames, correct or not, received from the PRI. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.6.14.1.3 | ColumnbtdsMcdnAborts | read-only | mandatory | This attribute counts the number of frame receptions aborted before completion, due to incoming frame format errors. This count wraps to zero after reaching it… |
| 1.3.6.1.4.1.562.2.4.1.81.6.14.1.4 | ColumnbtdsMcdnCrcErrors | read-only | mandatory | This attribute counts the number of frames received with CRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.6.14.1.5 | ColumnbtdsMcdnNonOctetErrors | read-only | mandatory | This attribute counts the number of frames received that were non octet aligned. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.6.14.1.6 | ColumnbtdsMcdnOverruns | read-only | mandatory | This attribute counts the number of frames received for which overruns occurred. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.6.14.1.8 | ColumnbtdsMcdnLargeFrmErrors | read-only | mandatory | This attribute counts the number of received frames which were longer than 1024 octets. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.81.6.286 | TablebtdsMcdnTSlotTable | not-accessible | mandatory | This attribute displays the operational mode of every time slot which is serviced by a voice service. The value idle means that the time slot is not used to se… |
| 1.3.6.1.4.1.562.2.4.1.81.6.286.1 | RowbtdsMcdnTSlotEntry | not-accessible | mandatory | An entry in the btdsMcdnTSlotTable. |
| 1.3.6.1.4.1.562.2.4.1.81.6.286.1.1 | ColumnbtdsMcdnTSlotIndex | not-accessible | mandatory | This variable represents the index for the btdsMcdnTSlotTable. |
| 1.3.6.1.4.1.562.2.4.1.81.6.286.1.2 | ColumnbtdsMcdnTSlotValue | read-only | mandatory | This variable represents an individual value for the btdsMcdnTSlotTable. |
| 1.3.6.1.4.1.562.2.4.1.81.100 | TablebtdsCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.81.100.1 | RowbtdsCidDataEntry | not-accessible | mandatory | An entry in the btdsCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.81.100.1.1 | ColumnbtdsCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.81.101 | TablebtdsIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.81.101.1 | RowbtdsIfEntryEntry | not-accessible | mandatory | An entry in the btdsIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.81.101.1.1 | ColumnbtdsIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.81.101.1.2 | ColumnbtdsIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.81.102 | TablebtdsOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.81.102.1 | RowbtdsOperStatusEntry | not-accessible | mandatory | An entry in the btdsOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.81.102.1.1 | ColumnbtdsSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.81.103 | TablebtdsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.81.103.1 | RowbtdsStateEntry | not-accessible | mandatory | An entry in the btdsStateTable. |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.1 | ColumnbtdsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.2 | ColumnbtdsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.3 | ColumnbtdsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.4 | ColumnbtdsAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.5 | ColumnbtdsProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.6 | ColumnbtdsControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.7 | ColumnbtdsAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.8 | ColumnbtdsStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.81.103.1.9 | ColumnbtdsUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.81.105 | TablebtdsOperationalTable | not-accessible | mandatory | This group contains operational attributes related to a Btds. |
| 1.3.6.1.4.1.562.2.4.1.81.105.1 | RowbtdsOperationalEntry | not-accessible | mandatory | An entry in the btdsOperationalTable. |
| 1.3.6.1.4.1.562.2.4.1.81.105.1.1 | ColumnbtdsServiceFailureReason | read-only | mandatory | This attribute indicates the result of end to end negotiation with the remote end across the subnet. If serviceFailureReason is undetermined, this Btds has not… |
| 1.3.6.1.4.1.562.2.4.2.46 | NodebitTransparentMIB | |||
| 1.3.6.1.4.1.562.2.4.2.46.1 | NodebitTransparentGroup | |||
| 1.3.6.1.4.1.562.2.4.2.46.1.5 | NodebitTransparentGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.46.1.5.2 | NodebitTransparentGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.46.1.5.2.2 | NodebitTransparentGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.46.3 | NodebitTransparentCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.46.3.5 | NodebitTransparentCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.46.3.5.2 | NodebitTransparentCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.46.3.5.2.2 | NodebitTransparentCapabilitiesBE01A |