Nortel-Magellan-Passport-CircuitEmulationServiceMIB
162 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 PassportCounter64 RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString EnterpriseDateAndTime Hex Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.119 | Nodeaal1Ces | |||
| 1.3.6.1.4.1.562.2.4.1.119.1 | Tableaal1CesRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of aal1Ces components. |
| 1.3.6.1.4.1.562.2.4.1.119.1.1 | Rowaal1CesRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single aal1Ces component. |
| 1.3.6.1.4.1.562.2.4.1.119.1.1.1 | Columnaal1CesRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of aal1Ces components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.119.1.1.2 | Columnaal1CesComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.119.1.1.4 | Columnaal1CesStorageType | read-only | mandatory | This variable represents the storage type value for the aal1Ces tables. |
| 1.3.6.1.4.1.562.2.4.1.119.1.1.10 | Columnaal1CesIndex | not-accessible | mandatory | This variable represents the index for the aal1Ces tables. |
| 1.3.6.1.4.1.562.2.4.1.119.2 | Nodeaal1CesNap | |||
| 1.3.6.1.4.1.562.2.4.1.119.2.1 | Tableaal1CesNapRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of aal1CesNap components. |
| 1.3.6.1.4.1.562.2.4.1.119.2.1.1 | Rowaal1CesNapRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single aal1CesNap component. |
| 1.3.6.1.4.1.562.2.4.1.119.2.1.1.1 | Columnaal1CesNapRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of aal1CesNap components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.119.2.1.1.2 | Columnaal1CesNapComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.119.2.1.1.4 | Columnaal1CesNapStorageType | read-only | mandatory | This variable represents the storage type value for the aal1CesNap tables. |
| 1.3.6.1.4.1.562.2.4.1.119.2.1.1.10 | Columnaal1CesNapIndex | not-accessible | mandatory | This variable represents the index for the aal1CesNap tables. |
| 1.3.6.1.4.1.562.2.4.1.119.2.10 | Tableaal1CesNapProvTable | not-accessible | mandatory | This group contains the provisioning data for the NailedUpAdaptationPoint component. |
| 1.3.6.1.4.1.562.2.4.1.119.2.10.1 | Rowaal1CesNapProvEntry | not-accessible | mandatory | An entry in the aal1CesNapProvTable. |
| 1.3.6.1.4.1.562.2.4.1.119.2.10.1.1 | Columnaal1CesNapAtmConnection | read-write | mandatory | This attribute specifies the identity of the component to which the NailedUpAdaptationPoint is linked. This will be an AtmIf Vcc NailedUpEndPoint or an AtmIf V… |
| 1.3.6.1.4.1.562.2.4.1.119.3 | Nodeaal1CesAep | |||
| 1.3.6.1.4.1.562.2.4.1.119.3.1 | Tableaal1CesAepRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of aal1CesAep components. |
| 1.3.6.1.4.1.562.2.4.1.119.3.1.1 | Rowaal1CesAepRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single aal1CesAep component. |
| 1.3.6.1.4.1.562.2.4.1.119.3.1.1.1 | Columnaal1CesAepRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of aal1CesAep components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.119.3.1.1.2 | Columnaal1CesAepComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.119.3.1.1.4 | Columnaal1CesAepStorageType | read-only | mandatory | This variable represents the storage type value for the aal1CesAep tables. |
| 1.3.6.1.4.1.562.2.4.1.119.3.1.1.10 | Columnaal1CesAepIndex | not-accessible | mandatory | This variable represents the index for the aal1CesAep tables. |
| 1.3.6.1.4.1.562.2.4.1.119.3.10 | Tableaal1CesAepProvEndPointAddrTable | not-accessible | mandatory | This group contains NSAP address provisioning data for components using switched virtual circuits. |
| 1.3.6.1.4.1.562.2.4.1.119.3.10.1 | Rowaal1CesAepProvEndPointAddrEntry | not-accessible | mandatory | An entry in the aal1CesAepProvEndPointAddrTable. |
| 1.3.6.1.4.1.562.2.4.1.119.3.10.1.1 | Columnaal1CesAepExpectedRemoteAddress | read-write | mandatory | This attribute specifies the expected remote address prefix for an incoming connection setup request. If expectedRemoteAddress is not empty, only matching conn… |
| 1.3.6.1.4.1.562.2.4.1.119.3.10.1.2 | Columnaal1CesAepLocalAddress | read-write | mandatory | This attribute specifies the local NSAP address. If the switch prefix (the nodePrefix attribute of the ModuleData component) has been provisioned, a default va… |
| 1.3.6.1.4.1.562.2.4.1.119.3.11 | Tableaal1CesAepProvTable | not-accessible | mandatory | This group contains the provisioning data specific to the ActiveEndPoint component. |
| 1.3.6.1.4.1.562.2.4.1.119.3.11.1 | Rowaal1CesAepProvEntry | not-accessible | mandatory | An entry in the aal1CesAepProvTable. |
| 1.3.6.1.4.1.562.2.4.1.119.3.11.1.1 | Columnaal1CesAepAddressToCall | read-write | mandatory | This attribute specifies the remote NSAP address which this ActiveEndPoint will call. |
| 1.3.6.1.4.1.562.2.4.1.119.3.11.1.2 | Columnaal1CesAepRoutingOption | read-write | mandatory | routingOption specifies the type of routing to use for establishing the connection: porsOnly means that only the Path Oriented Routing System may be used in es… |
| 1.3.6.1.4.1.562.2.4.1.119.3.11.1.3 | Columnaal1CesAepProfile | read-write | mandatory | This attribute specifies the PORS routing profile to use for this connection. If profile is empty, PORS will provide a default profile. |
| 1.3.6.1.4.1.562.2.4.1.119.3.11.1.4 | Columnaal1CesAepFirstRetryInterval | read-write | mandatory | This attribute defines the time to wait, in seconds, before attempting to establish the connection after the first failed attempt. The time to wait between sub… |
| 1.3.6.1.4.1.562.2.4.1.119.3.11.1.5 | Columnaal1CesAepRetryLimit | read-write | mandatory | retryLimit specifies the maximum number of consecutive unsuccessful connection setup attempts that may be made before further attempts are abandoned. If this l… |
| 1.3.6.1.4.1.562.2.4.1.119.3.12 | Tableaal1CesAepEpOperTable | not-accessible | mandatory | This group contains general operational attributes for components using switched virtual circuits. |
| 1.3.6.1.4.1.562.2.4.1.119.3.12.1 | Rowaal1CesAepEpOperEntry | not-accessible | mandatory | An entry in the aal1CesAepEpOperTable. |
| 1.3.6.1.4.1.562.2.4.1.119.3.12.1.1 | Columnaal1CesAepRemoteAddress | read-only | mandatory | remoteAddress is the address of the remote end point. If a connection is currently established, remoteAddress will contain the address of the remote end point.… |
| 1.3.6.1.4.1.562.2.4.1.119.3.12.1.2 | Columnaal1CesAepLastTearDownCause | read-only | mandatory | lastTearDownCause indicates the cause of the last connection tear down. The values are as defined in the ATM Forum ATM User- Network Interface (UNI) Specificat… |
| 1.3.6.1.4.1.562.2.4.1.119.3.12.1.3 | Columnaal1CesAepLastTearDownDiagnostic | read-only | mandatory | lastTearDownDiagnostic provides a diagnostic to supplement the lastTearDownCause attribute. |
| 1.3.6.1.4.1.562.2.4.1.119.3.13 | Tableaal1CesAepOutTable | not-accessible | mandatory | This group contains status information about the AAL1 Circuit Emulation Service ActiveEndPoint component. |
| 1.3.6.1.4.1.562.2.4.1.119.3.13.1 | Rowaal1CesAepOutEntry | not-accessible | mandatory | An entry in the aal1CesAepOutTable. |
| 1.3.6.1.4.1.562.2.4.1.119.3.13.1.1 | Columnaal1CesAepSvcStatus | read-only | mandatory | svcStatus indicates the status of the incoming and outgoing connections. When this attribute has the value initialising, it indicates that the component is ini… |
| 1.3.6.1.4.1.562.2.4.1.119.3.13.1.2 | Columnaal1CesAepLastSetupFailureCause | read-only | mandatory | lastSetupFailureCause indicates the cause of the last connection setup failure. The values are as defined in the ATM Forum ATM User- Network Interface (UNI) Sp… |
| 1.3.6.1.4.1.562.2.4.1.119.3.13.1.3 | Columnaal1CesAepLastSetupFailureDiagnostic | read-only | mandatory | lastSetupFailureDiagnostic provides a diagnostic to supplement the lastSetupFailureCause attribute. |
| 1.3.6.1.4.1.562.2.4.1.119.3.13.1.4 | Columnaal1CesAepRetryTimeRemaining | read-only | mandatory | retryTimerValue is the current value of the retry timer for this connection; it indicates the number of seconds before the next connection attempt will be made… |
| 1.3.6.1.4.1.562.2.4.1.119.3.13.1.5 | Columnaal1CesAepRetryFailures | read-only | mandatory | retryFailures counts the number of consecutive failed connection attempts. retryFailures is reset to 0 whenever a connection is successfully established, or th… |
| 1.3.6.1.4.1.562.2.4.1.119.4 | Nodeaal1CesPep | |||
| 1.3.6.1.4.1.562.2.4.1.119.4.1 | Tableaal1CesPepRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of aal1CesPep components. |
| 1.3.6.1.4.1.562.2.4.1.119.4.1.1 | Rowaal1CesPepRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single aal1CesPep component. |
| 1.3.6.1.4.1.562.2.4.1.119.4.1.1.1 | Columnaal1CesPepRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of aal1CesPep components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.119.4.1.1.2 | Columnaal1CesPepComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.119.4.1.1.4 | Columnaal1CesPepStorageType | read-only | mandatory | This variable represents the storage type value for the aal1CesPep tables. |
| 1.3.6.1.4.1.562.2.4.1.119.4.1.1.10 | Columnaal1CesPepIndex | not-accessible | mandatory | This variable represents the index for the aal1CesPep tables. |
| 1.3.6.1.4.1.562.2.4.1.119.4.10 | Tableaal1CesPepProvEndPointAddrTable | not-accessible | mandatory | This group contains NSAP address provisioning data for components using switched virtual circuits. |
| 1.3.6.1.4.1.562.2.4.1.119.4.10.1 | Rowaal1CesPepProvEndPointAddrEntry | not-accessible | mandatory | An entry in the aal1CesPepProvEndPointAddrTable. |
| 1.3.6.1.4.1.562.2.4.1.119.4.10.1.1 | Columnaal1CesPepExpectedRemoteAddress | read-write | mandatory | This attribute specifies the expected remote address prefix for an incoming connection setup request. If expectedRemoteAddress is not empty, only matching conn… |
| 1.3.6.1.4.1.562.2.4.1.119.4.10.1.2 | Columnaal1CesPepLocalAddress | read-write | mandatory | This attribute specifies the local NSAP address. If the switch prefix (the nodePrefix attribute of the ModuleData component) has been provisioned, a default va… |
| 1.3.6.1.4.1.562.2.4.1.119.4.11 | Tableaal1CesPepEpOperTable | not-accessible | mandatory | This group contains general operational attributes for components using switched virtual circuits. |
| 1.3.6.1.4.1.562.2.4.1.119.4.11.1 | Rowaal1CesPepEpOperEntry | not-accessible | mandatory | An entry in the aal1CesPepEpOperTable. |
| 1.3.6.1.4.1.562.2.4.1.119.4.11.1.1 | Columnaal1CesPepRemoteAddress | read-only | mandatory | remoteAddress is the address of the remote end point. If a connection is currently established, remoteAddress will contain the address of the remote end point.… |
| 1.3.6.1.4.1.562.2.4.1.119.4.11.1.2 | Columnaal1CesPepLastTearDownCause | read-only | mandatory | lastTearDownCause indicates the cause of the last connection tear down. The values are as defined in the ATM Forum ATM User- Network Interface (UNI) Specificat… |
| 1.3.6.1.4.1.562.2.4.1.119.4.11.1.3 | Columnaal1CesPepLastTearDownDiagnostic | read-only | mandatory | lastTearDownDiagnostic provides a diagnostic to supplement the lastTearDownCause attribute. |
| 1.3.6.1.4.1.562.2.4.1.119.4.12 | Tableaal1CesPepPassiveOperTable | not-accessible | mandatory | This group contains status information about the AAL1 Circuit Emulation Service PassiveEndPoint component. |
| 1.3.6.1.4.1.562.2.4.1.119.4.12.1 | Rowaal1CesPepPassiveOperEntry | not-accessible | mandatory | An entry in the aal1CesPepPassiveOperTable. |
| 1.3.6.1.4.1.562.2.4.1.119.4.12.1.1 | Columnaal1CesPepSvcStatus | read-only | mandatory | svcStatus indicates the status of the incoming connection. When this attribute has the value initialising, it indicates that the component is initialising when… |
| 1.3.6.1.4.1.562.2.4.1.119.5 | Nodeaal1CesLCo | |||
| 1.3.6.1.4.1.562.2.4.1.119.5.1 | Tableaal1CesLCoRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of aal1CesLCo components. |
| 1.3.6.1.4.1.562.2.4.1.119.5.1.1 | Rowaal1CesLCoRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single aal1CesLCo component. |
| 1.3.6.1.4.1.562.2.4.1.119.5.1.1.1 | Columnaal1CesLCoRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of aal1CesLCo components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.119.5.1.1.2 | Columnaal1CesLCoComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.119.5.1.1.4 | Columnaal1CesLCoStorageType | read-only | mandatory | This variable represents the storage type value for the aal1CesLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.119.5.1.1.10 | Columnaal1CesLCoIndex | not-accessible | mandatory | This variable represents the index for the aal1CesLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.119.5.10 | Tableaal1CesLCoPathDataTable | not-accessible | mandatory | This group contains all operational attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1 | Rowaal1CesLCoPathDataEntry | not-accessible | mandatory | An entry in the aal1CesLCoPathDataTable. |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.1 | Columnaal1CesLCoState | read-only | mandatory | This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end provisioned or the application ha… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.2 | Columnaal1CesLCoOverrideRemoteName | read-write | mandatory | If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unloc… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.3 | Columnaal1CesLCoEnd | read-only | mandatory | This attribute identifies whether this is the calling or called end of the path. |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.4 | Columnaal1CesLCoCostMetric | read-only | mandatory | This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was est… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.5 | Columnaal1CesLCoDelayMetric | read-only | mandatory | This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the pa… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.6 | Columnaal1CesLCoRoundTripDelay | read-only | mandatory | This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.7 | Columnaal1CesLCoSetupPriority | read-only | mandatory | This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complem… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.8 | Columnaal1CesLCoHoldingPriority | read-only | mandatory | This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.9 | Columnaal1CesLCoRequiredTxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidt… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.10 | Columnaal1CesLCoRequiredRxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth fo… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.11 | Columnaal1CesLCoRequiredTrafficType | read-only | mandatory | This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.12 | Columnaal1CesLCoPermittedTrunkTypes | read-only | mandatory | This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terr… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.13 | Columnaal1CesLCoRequiredSecurity | read-only | mandatory | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secu… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.14 | Columnaal1CesLCoRequiredCustomerParameter | read-only | mandatory | This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer define… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.15 | Columnaal1CesLCoEmissionPriority | read-only | mandatory | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the e… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.16 | Columnaal1CesLCoDiscardPriority | read-only | mandatory | This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying t… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.17 | Columnaal1CesLCoPathType | read-only | mandatory | This attribute indicates whether the path for this PLC was determined automatically or by static provisioning. Normal pathTypes are selected automatically by R… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.18 | Columnaal1CesLCoRetryCount | read-only | mandatory | This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.19 | Columnaal1CesLCoPathFailureCount | read-only | mandatory | This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the path is up. If a path fails anytim… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.20 | Columnaal1CesLCoReasonForNoRoute | read-only | mandatory | This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-expla… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.21 | Columnaal1CesLCoLastTearDownReason | read-only | mandatory | This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This att… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.22 | Columnaal1CesLCoPathFailureAction | read-only | mandatory | This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is di… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.23 | Columnaal1CesLCoBumpPreference | read-only | mandatory | This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connect… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.24 | Columnaal1CesLCoOptimization | read-only | mandatory | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as op… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.25 | Columnaal1CesLCoPathUpDateTime | read-only | mandatory | This is the time stamp when the current path was established or reestablished. |
| 1.3.6.1.4.1.562.2.4.1.119.5.11 | Tableaal1CesLCoStatsTable | not-accessible | mandatory | This group contains the operational statistics attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.119.5.11.1 | Rowaal1CesLCoStatsEntry | not-accessible | mandatory | An entry in the aal1CesLCoStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.119.5.11.1.1 | Columnaal1CesLCoPktsToNetwork | read-only | mandatory | This attribute counts the number of packets transmitted to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.119.5.11.1.2 | Columnaal1CesLCoBytesToNetwork | read-only | mandatory | This attribute counts the number of bytes sent to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.119.5.11.1.3 | Columnaal1CesLCoPktsFromNetwork | read-only | mandatory | This attribute counts the number of packets received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.119.5.11.1.4 | Columnaal1CesLCoBytesFromNetwork | read-only | mandatory | This attribute counts the number of bytes received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.119.5.264 | Tableaal1CesLCoPathTable | not-accessible | mandatory | This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path. |
| 1.3.6.1.4.1.562.2.4.1.119.5.264.1 | Rowaal1CesLCoPathEntry | not-accessible | mandatory | An entry in the aal1CesLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.119.5.264.1.1 | Columnaal1CesLCoPathValue | read-only | mandatory | This variable represents both the value and the index for the aal1CesLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.119.10 | Tableaal1CesCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.119.10.1 | Rowaal1CesCidDataEntry | not-accessible | mandatory | An entry in the aal1CesCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.119.10.1.1 | Columnaal1CesCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.119.11 | Tableaal1CesProvTable | not-accessible | mandatory | This group contains basic provisioning data for the AAL1 Circuit Emulation Service. |
| 1.3.6.1.4.1.562.2.4.1.119.11.1 | Rowaal1CesProvEntry | not-accessible | mandatory | An entry in the aal1CesProvTable. |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.1 | Columnaal1CesServiceType | read-write | mandatory | This attribute specifies the service type for the CES. In an unstructured service, the entire data stream at the service interface (including any framing bits … |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.2 | Columnaal1CesBufferSize | read-write | mandatory | This attribute defines the size of the AAL1 receive segment reassembly buffer in bytes. The value of this attribute will affect the overflow condition during A… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.3 | Columnaal1CesCellDelayVariationTolerance | read-write | mandatory | This attribute defines the maximum cell arrival jitter (in milliseconds) that the AAL1 reassembly process will tolerate in the ATM cell stream without producin… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.4 | Columnaal1CesCellLossIntegrationPeriod | read-write | mandatory | This attribute defines the cell loss integration period. This period defines the interval of time (in milliseconds) for which a loss of cells condition must pe… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.5 | Columnaal1CesInterfaceName | read-write | mandatory | This attribute identifies the instance of Chan to which an instance of Aal1Ces is linked. |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.6 | Columnaal1CesPartialFill | read-write | mandatory | A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This period of time can be reduced … |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.7 | Columnaal1CesIdleSuppression | read-write | mandatory | This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the partialFill level) match the idlePa… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.8 | Columnaal1CesIdlePattern | read-write | mandatory | This attribute specifies the pattern which the bytes of an ATM payload, up to the partialFill level, must match in order for the cell to be classified as idle.… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.9 | Columnaal1CesCellLossRecoveryPeriod | read-write | mandatory | This attribute defines the cell loss recovery period. This period defines the interval of time (in seconds) for which a loss of cells condition must desist bef… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.10 | Columnaal1CesDummyDataByte | read-write | mandatory | This attribute defines the pattern which is played out onto the service interface to maintain bit integrity when data is unavailable from the ATM network. For … |
| 1.3.6.1.4.1.562.2.4.1.119.12 | Tableaal1CesStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.119.12.1 | Rowaal1CesStateEntry | not-accessible | mandatory | An entry in the aal1CesStateTable. |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.1 | Columnaal1CesAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.2 | Columnaal1CesOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.3 | Columnaal1CesUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.4 | Columnaal1CesAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.5 | Columnaal1CesProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.6 | Columnaal1CesControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.7 | Columnaal1CesAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.8 | Columnaal1CesStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.119.12.1.9 | Columnaal1CesUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.119.13 | Tableaal1CesOperTable | not-accessible | mandatory | This group contains status information about the AAL1 Circuit Emulation Service. |
| 1.3.6.1.4.1.562.2.4.1.119.13.1 | Rowaal1CesOperEntry | not-accessible | mandatory | An entry in the aal1CesOperTable. |
| 1.3.6.1.4.1.562.2.4.1.119.13.1.1 | Columnaal1CesCellLossStatus | read-only | mandatory | This attribute is set to loss when a buffer underflow alarm is raised (see cellLossIntegrationPeriod), and noLoss when it is clear. |
| 1.3.6.1.4.1.562.2.4.1.119.13.1.2 | Columnaal1CesAal1LayerLossStatus | read-only | mandatory | This attribute is set to loss when an AAL1 layer alarm is raised, and noLoss when it is clear. |
| 1.3.6.1.4.1.562.2.4.1.119.13.1.3 | Columnaal1CesConnectionStatus | read-only | mandatory | This attribute indicates whether a service is non- operational because of a problem with the service interface side of the service (in which case, it is set to… |
| 1.3.6.1.4.1.562.2.4.1.119.14 | Tableaal1CesStatsTable | not-accessible | mandatory | This group contains statistical data for an AAL1 Circuit Emulation Service. |
| 1.3.6.1.4.1.562.2.4.1.119.14.1 | Rowaal1CesStatsEntry | not-accessible | mandatory | An entry in the aal1CesStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.1 | Columnaal1CesCellsTransmitted | read-only | mandatory | This attribute counts the total number of cells transmitted to the backplane (ingress direction). This includes cells containing CBR data, trunk conditioning c… |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.2 | Columnaal1CesCellsReceived | read-only | mandatory | This attribute counts the total number of cells received from the backplane (egress direction). This includes CBR user data cells, cells with AAL1 header error… |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.3 | Columnaal1CesLostCells | read-only | mandatory | This attribute counts the number of cells declared as never received by the AAL1 protocol layer. The counter wraps when the maximum value is exceeded. |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.4 | Columnaal1CesBufferUnderflows | read-only | mandatory | This attribute counts the number of times the AAL1 reassembly buffer underflows. In the case of a continuous buffer starvation, a single buffer underflow event… |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.5 | Columnaal1CesBufferOverflows | read-only | mandatory | This attribute counts the number of times the AAL1 reassembly buffer overflows. Buffer overflows occur when AAL1 cells arrive at a rate above that which is exp… |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.6 | Columnaal1CesReassembledCells | read-only | mandatory | This attribute counts the number of received cells whose payload has been played out to the service interface. The counter wraps when the maximum value is exce… |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.7 | Columnaal1CesHeaderErrors | read-only | mandatory | This attribute counts the number of cells received with AAL1 header errors. The counter wraps when the maximum value is exceeded. |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.8 | Columnaal1CesPointerReframes | read-only | mandatory | This attribute counts the number of times that the AAL1 reassembly unit found an SDT pointer where it was not expected to be, and as a result had to reacquire … |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.9 | Columnaal1CesPointerParityErrors | read-only | mandatory | This attribute counts the number of times that the AAL1 reassembly unit detects a parity check failure at the point where an SDT pointer is expected. Errors of… |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.10 | Columnaal1CesAal1SequenceErrors | read-only | mandatory | This attribute counts the number of times that the sequence number of an incoming AAL1 Type 1 SAR-PDU gets out of synchronisation, as defined by ITU-T Recommen… |
| 1.3.6.1.4.1.562.2.4.1.119.14.1.11 | Columnaal1CesMisinsertedCells | read-only | mandatory | This attribute counts the number of AAL1 sequence violations which the AAL convergence sublayer interprets as misinserted cells, as defined by ITU-T I.363.1. T… |
| 1.3.6.1.4.1.562.2.4.2.55 | NodecircuitEmulationServiceMIB | |||
| 1.3.6.1.4.1.562.2.4.2.55.1 | NodecircuitEmulationServiceGroup | |||
| 1.3.6.1.4.1.562.2.4.2.55.1.4 | NodecircuitEmulationServiceGroupBD | |||
| 1.3.6.1.4.1.562.2.4.2.55.1.4.1 | NodecircuitEmulationServiceGroupBD00 | |||
| 1.3.6.1.4.1.562.2.4.2.55.1.4.1.2 | NodecircuitEmulationServiceGroupBD00A | |||
| 1.3.6.1.4.1.562.2.4.2.55.3 | NodecircuitEmulationServiceCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.55.3.4 | NodecircuitEmulationServiceCapabilitiesBD | |||
| 1.3.6.1.4.1.562.2.4.2.55.3.4.1 | NodecircuitEmulationServiceCapabilitiesBD00 | |||
| 1.3.6.1.4.1.562.2.4.2.55.3.4.1.2 | NodecircuitEmulationServiceCapabilitiesBD00A |