Nortel-Magellan-Passport-DcmeMIB
301 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 PassportCounter64 RowPointer RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString DigitString EnterpriseDateAndTime FixedPoint1 Hex Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.129 | Nodedcme | |||
| 1.3.6.1.4.1.562.2.4.1.129.1 | TabledcmeRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dcme components. |
| 1.3.6.1.4.1.562.2.4.1.129.1.1 | RowdcmeRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dcme component. |
| 1.3.6.1.4.1.562.2.4.1.129.1.1.1 | ColumndcmeRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of dcme components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.129.1.1.2 | ColumndcmeComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.129.1.1.4 | ColumndcmeStorageType | read-only | mandatory | This variable represents the storage type value for the dcme tables. |
| 1.3.6.1.4.1.562.2.4.1.129.1.1.10 | ColumndcmeIndex | not-accessible | mandatory | This variable represents the index for the dcme tables. |
| 1.3.6.1.4.1.562.2.4.1.129.2 | NodedcmeProfile | |||
| 1.3.6.1.4.1.562.2.4.1.129.2.1 | TabledcmeProfileRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dcmeProfile components. |
| 1.3.6.1.4.1.562.2.4.1.129.2.1.1 | RowdcmeProfileRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dcmeProfile component. |
| 1.3.6.1.4.1.562.2.4.1.129.2.1.1.1 | ColumndcmeProfileRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of dcmeProfile components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.129.2.1.1.2 | ColumndcmeProfileComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.129.2.1.1.4 | ColumndcmeProfileStorageType | read-only | mandatory | This variable represents the storage type value for the dcmeProfile tables. |
| 1.3.6.1.4.1.562.2.4.1.129.2.1.1.10 | ColumndcmeProfileIndex | not-accessible | mandatory | This variable represents the index for the dcmeProfile tables. |
| 1.3.6.1.4.1.562.2.4.1.129.2.10 | TabledcmeProfileLCOpsTable | not-accessible | mandatory | This group contains attributes used in setting up Switched Logical Connections (SLC) over the network using the Path Oriented Routing System (PORS) between two… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1 | RowdcmeProfileLCOpsEntry | not-accessible | mandatory | An entry in the dcmeProfileLCOpsTable. |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.1 | ColumndcmeProfileSetupPriority | read-write | mandatory | This attribute specifies the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS establishes a path through… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.2 | ColumndcmeProfileHoldingPriority | read-write | mandatory | This attribute specifies the priority that a path holds once it is established. Zero is the highest priority and four is the lowest. A path's holdingPriority d… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.3 | ColumndcmeProfileBumpPreference | read-write | mandatory | This attribute specifies when bumping occurs in the route selection process. A connection with higher (numerically less) setupPriority may bump a connection wi… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.4 | ColumndcmeProfileRequiredTrafficType | read-write | mandatory | This attribute specifies the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.5 | ColumndcmeProfilePermittedTrunkTypes | read-write | mandatory | This attribute specifies up to eight types of trunks that can be used on the route. The terrestrial and satellite trunk types are defined, leaving six remainin… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.6 | ColumndcmeProfileRequiredSecurity | read-write | mandatory | This attribute specifies the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secu… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.7 | ColumndcmeProfileRequiredCustomerParm | read-write | mandatory | This attribute specifies the allowed customer defined parameter of the trunks on the route. The value of requiredCustomerParm ranges from 0 to 7. The meaning o… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.8 | ColumndcmeProfilePathAttributeToMinimize | read-write | mandatory | This attribute specifies whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and a delay metric associated with… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.9 | ColumndcmeProfileMaximumAcceptableCost | read-write | mandatory | This attribute specifies an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the route. The cost metric is the … |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.10 | ColumndcmeProfileMaximumAcceptableDelay | read-write | mandatory | This attribute specifies an upper bound on the delay of a route, which is the sum of the delays of all trunks on the route. It should be provisioned with a rea… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.11 | ColumndcmeProfileEmissionPriority | read-write | mandatory | This attribute specifies the urgency with which packets on the path are emitted by the trunks on the route. An emissionPriority of 0 indicates the highest emis… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.12 | ColumndcmeProfileDiscardPriority | read-write | mandatory | This attribute specifies the importance of the packets on the path. A discardPriority of 1 is used for paths carrying the most important traffic, and three is … |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.13 | ColumndcmeProfilePathFailureAction | read-write | mandatory | This attribute specifies whether the application can tolerate momentary interruption of a path while a new path is selected. If pathFailureAction is disconnect… |
| 1.3.6.1.4.1.562.2.4.1.129.2.10.1.14 | ColumndcmeProfileOptimization | read-write | mandatory | This attribute specifies whether this connection should attempt to optimize its path when requested by the Rtg Pors component. Every path is optimal when it is… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11 | TabledcmeProfileFrOpsTable | not-accessible | mandatory | This group contains attributes which define how audio data will be carried across the Passport network. |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1 | RowdcmeProfileFrOpsEntry | not-accessible | mandatory | An entry in the dcmeProfileFrOpsTable. |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.1 | ColumndcmeProfileVoiceEncoding | read-write | mandatory | This attribute specifies the encoding of voice traffic. A voiceEncoding setting of g711G726 specifies that either pulse code modulation (PCM) defined by ITU-T … |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.2 | ColumndcmeProfileMaxVoiceBitRate | read-write | mandatory | This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a voice call on this channel when voiceEncoding is g711G726. … |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.3 | ColumndcmeProfileMinVoiceBitRate | read-write | mandatory | This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a voice call on this channel when voiceEncoding is g711G726. … |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.4 | ColumndcmeProfileVoiceTrafficOptimization | read-write | mandatory | This attribute specifies how to optimize voice traffic. If voiceTrafficOptimization is bandwidth, voice traffic is optimized to preserve bandwidth. If voiceTra… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.5 | ColumndcmeProfileSilenceSuppression | read-write | mandatory | This attribute specifies when silence suppression is performed. It applies to both voice and modem calls. If silenceSuppression is off, silence suppression is … |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.6 | ColumndcmeProfileSilenceSuppressionFactor | read-write | mandatory | This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silence suppression is used, the ban… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.7 | ColumndcmeProfileEchoCancellation | read-write | mandatory | This attribute specifies whether echo cancellation is performed on calls using this profile as specified by ITU-T G.165. It applies mainly to voice traffic. Ec… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.9 | ColumndcmeProfileModemFaxEncoding | read-write | mandatory | This attribute specifies how modem and fax traffic is encoded. Modem and fax traffic are identified by an inband 2100 Hz tone. Prior to the detection of a 2100… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.10 | ColumndcmeProfileMaxModemFaxG711G726Rate | read-write | mandatory | This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a modem call on this channel. It also specifies the maximum p… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.11 | ColumndcmeProfileMinModemFaxG711G726Rate | read-write | mandatory | This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a modem call on this channel. It also specifies the minimum p… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.12 | ColumndcmeProfileFaxIdleSuppressionG711G726 | read-write | mandatory | This attribute specifies whether fax idle suppression is performed on fax traffic on calls using this profile. It only applies to fax traffic, not voice or mod… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.13 | ColumndcmeProfileInsertedOutputDelay | read-write | mandatory | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to voice, modem and fax traffic. It… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.14 | ColumndcmeProfileIngressAudioGain | read-write | mandatory | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voic… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.15 | ColumndcmeProfileEgressAudioGain | read-write | mandatory | This attribute specifies the gain in dB that is applied to data leaving the network on this route. It applies to voice, modem and fax traffic. For example, egr… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.16 | ColumndcmeProfileSpeechHangoverTime | read-write | mandatory | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. Higher values of speechHangoverT… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.17 | ColumndcmeProfileComfortNoiseCap | read-write | mandatory | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap before egressAudioGain is appli… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.18 | ColumndcmeProfileModemFaxSpeechDiscrim | read-write | mandatory | This attribute specifies whether this Dcme differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is on and a false 2100 Hz tone is detec… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.19 | ColumndcmeProfileV17EncodedAsG711G726 | read-write | mandatory | This attribute specifies how services using this Profile negotiate with V.17 fax machines. This attribute is not used unless the modemFaxEncoding, defined in t… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.20 | ColumndcmeProfileDtmfRegeneration | read-write | mandatory | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfRegeneration is on, it is desire… |
| 1.3.6.1.4.1.562.2.4.1.129.2.11.1.21 | ColumndcmeProfileMaxFaxRelayRate | read-write | mandatory | This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or faxRelayG711G726. |
| 1.3.6.1.4.1.562.2.4.1.129.10 | TabledcmeProvTable | not-accessible | mandatory | This group contains the provisionable attributes of a Dcme component. |
| 1.3.6.1.4.1.562.2.4.1.129.10.1 | RowdcmeProvEntry | not-accessible | mandatory | An entry in the dcmeProvTable. |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.1 | ColumndcmeCommentText | read-write | mandatory | Use of this attribute is at the discretion of the system administrator. Typically, it specifies the name of the customer that is using this Dcme. |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.2 | ColumndcmePreestablishedConnections | read-write | mandatory | This attribute specifies the number of Logical Connections (LC) preestablished between each DcmeLink associated with this Dcme and its remote peer, that are es… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.3 | ColumndcmeTrmThreshold | read-write | mandatory | This attribute is used to determine when the DcmeLink may be unable to handle incoming calls from the ISC. If the Dcme fails to replenish the number of preesta… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.4 | ColumndcmeTrmSignalChangeInterval | read-write | mandatory | This attribute specifies a minimum time interval between TRM signal change from 'No trunk(s) available for 3.1 kHz audio or speech' or 'No 64 kbit/s capacity a… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.5 | ColumndcmeSpeechAlarmThreshold | read-write | mandatory | This attribute specifies how many normal speech calls can be rejected by one dcmeLink within the alarmTimeInterval time before a SET alarm is generated. This a… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.6 | ColumndcmeAudio3kHzAlarmThreshold | read-write | mandatory | This attribute specifies how many audio 3.1 kHz calls can be rejected by one dcmeLink within the alarmTimeInterval time before a SET alarm is generated. This a… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.7 | ColumndcmeUnrestricted64kAlarmThreshold | read-write | mandatory | This attribute specifies how many unrestricted 64 kbit/s calls can be rejected by one dcmeLink within the alarmTimeInterval time before a SET alarm is generate… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.8 | ColumndcmeAlarmTimeInterval | read-write | mandatory | This attribute specifies the time interval within which the rejected speech calls, audio 3.1 kHz calls, and unrestricted 64 kbit/s calls are monitored. It is u… |
| 1.3.6.1.4.1.562.2.4.1.129.10.1.9 | ColumndcmeMaxUnrestricted64kCalls | read-write | mandatory | This attribute specifies the maximum number of simultaneous dynamic unrestricted 64 kbit/s calls that can be established. A value of 0 means that no dynamic un… |
| 1.3.6.1.4.1.562.2.4.1.129.11 | TabledcmeStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.129.11.1 | RowdcmeStateEntry | not-accessible | mandatory | An entry in the dcmeStateTable. |
| 1.3.6.1.4.1.562.2.4.1.129.11.1.1 | ColumndcmeAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.129.11.1.2 | ColumndcmeOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.129.11.1.3 | ColumndcmeUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.129.13 | TabledcmeStatsTable | not-accessible | mandatory | This group contains the statistics maintained by this Dcme. |
| 1.3.6.1.4.1.562.2.4.1.129.13.1 | RowdcmeStatsEntry | not-accessible | mandatory | An entry in the dcmeStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.129.13.1.1 | ColumndcmeTrm64kNotAvailable | read-only | mandatory | This attribute counts the total number of times the TRM signal was changed to the 'No 64 kbit/s capacity available' signal. This counter wraps to zero when it … |
| 1.3.6.1.4.1.562.2.4.1.129.13.1.2 | ColumndcmeTrmSpeechNotAvailable | read-only | mandatory | This attribute counts the total number of times the TRM signal was changed to the 'No trunk(s) available for 3.1 kHz audio or speech' signal. This counter wrap… |
| 1.3.6.1.4.1.562.2.4.1.129.419 | TabledcmeDLinksTable | not-accessible | mandatory | This attribute specifies all of the DcmeLinks which are associated with this Dcme. There can be up to 14 DcmeLinks associated with one Dcme. |
| 1.3.6.1.4.1.562.2.4.1.129.419.1 | RowdcmeDLinksEntry | not-accessible | mandatory | An entry in the dcmeDLinksTable. |
| 1.3.6.1.4.1.562.2.4.1.129.419.1.1 | ColumndcmeDLinksValue | read-write | mandatory | This variable represents both the value and the index for the dcmeDLinksTable. |
| 1.3.6.1.4.1.562.2.4.1.129.419.1.2 | ColumndcmeDLinksRowStatus | write-only | mandatory | This variable is used to control the addition and deletion of individual values of the dcmeDLinksTable. |
| 1.3.6.1.4.1.562.2.4.1.129.420 | TabledcmeActiveDcmeLinksTable | not-accessible | mandatory | This attribute indicates all of the DcmeLink components that are currently active and have registered with this Dcme. |
| 1.3.6.1.4.1.562.2.4.1.129.420.1 | RowdcmeActiveDcmeLinksEntry | not-accessible | mandatory | An entry in the dcmeActiveDcmeLinksTable. |
| 1.3.6.1.4.1.562.2.4.1.129.420.1.1 | ColumndcmeActiveDcmeLinksValue | read-only | mandatory | This variable represents both the value and the index for the dcmeActiveDcmeLinksTable. |
| 1.3.6.1.4.1.562.2.4.1.130 | Nodedcl | |||
| 1.3.6.1.4.1.562.2.4.1.130.1 | TabledclRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dcl components. |
| 1.3.6.1.4.1.562.2.4.1.130.1.1 | RowdclRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dcl component. |
| 1.3.6.1.4.1.562.2.4.1.130.1.1.1 | ColumndclRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of dcl components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.1.1.2 | ColumndclComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.1.1.4 | ColumndclStorageType | read-only | mandatory | This variable represents the storage type value for the dcl tables. |
| 1.3.6.1.4.1.562.2.4.1.130.1.1.10 | ColumndclIndex | not-accessible | mandatory | This variable represents the index for the dcl tables. |
| 1.3.6.1.4.1.562.2.4.1.130.2 | NodedclDna | |||
| 1.3.6.1.4.1.562.2.4.1.130.2.1 | TabledclDnaRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dclDna components. |
| 1.3.6.1.4.1.562.2.4.1.130.2.1.1 | RowdclDnaRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dclDna component. |
| 1.3.6.1.4.1.562.2.4.1.130.2.1.1.1 | ColumndclDnaRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of dclDna components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.2.1.1.2 | ColumndclDnaComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.2.1.1.4 | ColumndclDnaStorageType | read-only | mandatory | This variable represents the storage type value for the dclDna tables. |
| 1.3.6.1.4.1.562.2.4.1.130.2.1.1.10 | ColumndclDnaIndex | not-accessible | mandatory | This variable represents the index for the dclDna tables. |
| 1.3.6.1.4.1.562.2.4.1.130.2.10 | TabledclDnaAddressTable | not-accessible | mandatory | The Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. The string of address digi… |
| 1.3.6.1.4.1.562.2.4.1.130.2.10.1 | RowdclDnaAddressEntry | not-accessible | mandatory | An entry in the dclDnaAddressTable. |
| 1.3.6.1.4.1.562.2.4.1.130.2.10.1.1 | ColumndclDnaNumberingPlanIndicator | read-write | mandatory | This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. An address may belong to the X.121 or E.164 numbering plans. X.121 is u… |
| 1.3.6.1.4.1.562.2.4.1.130.2.10.1.2 | ColumndclDnaDataNetworkAddress | read-write | mandatory | The Dna attribute contains digits which form a unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where… |
| 1.3.6.1.4.1.562.2.4.1.130.3 | NodedclFramer | |||
| 1.3.6.1.4.1.562.2.4.1.130.3.1 | TabledclFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dclFramer components. |
| 1.3.6.1.4.1.562.2.4.1.130.3.1.1 | RowdclFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dclFramer component. |
| 1.3.6.1.4.1.562.2.4.1.130.3.1.1.1 | ColumndclFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of dclFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.3.1.1.2 | ColumndclFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.3.1.1.4 | ColumndclFramerStorageType | read-only | mandatory | This variable represents the storage type value for the dclFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.130.3.1.1.10 | ColumndclFramerIndex | not-accessible | mandatory | This variable represents the index for the dclFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.130.3.10 | TabledclFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.130.3.10.1 | RowdclFramerProvEntry | not-accessible | mandatory | An entry in the dclFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.130.3.10.1.1 | ColumndclFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.130.3.12 | TabledclFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.130.3.12.1 | RowdclFramerStateEntry | not-accessible | mandatory | An entry in the dclFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.130.3.12.1.1 | ColumndclFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.130.3.12.1.2 | ColumndclFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.130.3.12.1.3 | ColumndclFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.130.4 | NodedclVs | |||
| 1.3.6.1.4.1.562.2.4.1.130.4.1 | TabledclVsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dclVs components. |
| 1.3.6.1.4.1.562.2.4.1.130.4.1.1 | RowdclVsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dclVs component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.1.1.1 | ColumndclVsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of dclVs components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.4.1.1.2 | ColumndclVsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.4.1.1.4 | ColumndclVsStorageType | read-only | mandatory | This variable represents the storage type value for the dclVs tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.1.1.10 | ColumndclVsIndex | not-accessible | mandatory | This variable represents the index for the dclVs tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2 | NodedclVsFramer | |||
| 1.3.6.1.4.1.562.2.4.1.130.4.2.1 | TabledclVsFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dclVsFramer components. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1 | RowdclVsFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dclVsFramer component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1.1 | ColumndclVsFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of dclVsFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1.2 | ColumndclVsFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1.4 | ColumndclVsFramerStorageType | read-only | mandatory | This variable represents the storage type value for the dclVsFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.1.1.10 | ColumndclVsFramerIndex | not-accessible | mandatory | This variable represents the index for the dclVsFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.5 | NodedclVsFramerVfpDebug | |||
| 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1 | TabledclVsFramerVfpDebugRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dclVsFramerVfpDebug components. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1 | RowdclVsFramerVfpDebugRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dclVsFramerVfpDebug component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1.1 | ColumndclVsFramerVfpDebugRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of dclVsFramerVfpDebug components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1.2 | ColumndclVsFramerVfpDebugComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1.4 | ColumndclVsFramerVfpDebugStorageType | read-only | mandatory | This variable represents the storage type value for the dclVsFramerVfpDebug tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.5.1.1.10 | ColumndclVsFramerVfpDebugIndex | not-accessible | mandatory | This variable represents the index for the dclVsFramerVfpDebug tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.6 | NodedclVsFramerMvpDebug | |||
| 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1 | TabledclVsFramerMvpDebugRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dclVsFramerMvpDebug components. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1 | RowdclVsFramerMvpDebugRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dclVsFramerMvpDebug component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1.1 | ColumndclVsFramerMvpDebugRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of dclVsFramerMvpDebug components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1.2 | ColumndclVsFramerMvpDebugComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1.4 | ColumndclVsFramerMvpDebugStorageType | read-only | mandatory | This variable represents the storage type value for the dclVsFramerMvpDebug tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.6.1.1.10 | ColumndclVsFramerMvpDebugIndex | not-accessible | mandatory | This variable represents the index for the dclVsFramerMvpDebug tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.7 | NodedclVsFramerPcmCapture | |||
| 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1 | TabledclVsFramerPcmCaptureRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dclVsFramerPcmCapture components. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1 | RowdclVsFramerPcmCaptureRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dclVsFramerPcmCapture component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1.1 | ColumndclVsFramerPcmCaptureRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of dclVsFramerPcmCapture components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1.2 | ColumndclVsFramerPcmCaptureComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1.4 | ColumndclVsFramerPcmCaptureStorageType | read-only | mandatory | This variable represents the storage type value for the dclVsFramerPcmCapture tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.7.1.1.10 | ColumndclVsFramerPcmCaptureIndex | not-accessible | mandatory | This variable represents the index for the dclVsFramerPcmCapture tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.10 | TabledclVsFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.10.1 | RowdclVsFramerProvEntry | not-accessible | mandatory | An entry in the dclVsFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.10.1.1 | ColumndclVsFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.14 | TabledclVsFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.14.1 | RowdclVsFramerStateEntry | not-accessible | mandatory | An entry in the dclVsFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.14.1.1 | ColumndclVsFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.14.1.2 | ColumndclVsFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.14.1.3 | ColumndclVsFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15 | TabledclVsFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1 | RowdclVsFramerStatsEntry | not-accessible | mandatory | An entry in the dclVsFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.1 | ColumndclVsFramerTotalCells | read-only | mandatory | This attribute counts the total number of cells received from the interface. Each cell contains 44 bytes of data from the DS0 channel. Since a DS0 provides dat… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.2 | ColumndclVsFramerAudioCells | read-only | mandatory | This attribute counts the total number of cells containing audio data received from the interface while the channel was seized. A CCS channel is always conside… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.4 | ColumndclVsFramerSilenceCells | read-only | mandatory | This attribute counts the total number of cells containing silence data received from the interface which was not forwarded into the network, thus saving bandw… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.5 | ColumndclVsFramerModemCells | read-only | obsolete | This attribute is migrated into modemFaxCells. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.6 | ColumndclVsFramerCurrentEncodingRate | read-only | obsolete | This attribute has been migrated to currentRate in Operational group. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.7 | ColumndclVsFramerLrcErrors | read-only | mandatory | This attribute counts the number of frames received from the network with LRC errors. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.8 | ColumndclVsFramerFrmLostInNetwork | read-only | mandatory | This attribute counts the number of frames which the service knows it did not receive from the network although they were sent in to the network from the far e… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.9 | ColumndclVsFramerFrmUnderRuns | read-only | mandatory | This attribute counts the number of times that a frame was needed but was not available because it had been delayed too long in the network. This error may occ… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.10 | ColumndclVsFramerFrmDumped | read-only | mandatory | This attribute counts the number of frames which have been dumped because the output queue grew too large. This can occur if the clock rate on the incoming int… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.26 | ColumndclVsFramerModemSilenceCells | read-only | obsolete | This attribute is migrated into faxIdleCells. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.27 | ColumndclVsFramerCurrentEncoding | read-only | obsolete | This attribute has been migrated to currentEncoding in Operational group. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.28 | ColumndclVsFramerTptStatus | read-only | obsolete | This attribute has been migrated to tptStatus in Operational group. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.35 | ColumndclVsFramerFaxRelayCells | read-only | mandatory | This attribute counts the total number of fax relay cells sent to the network. This counter wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.36 | ColumndclVsFramerModemFaxCells | read-only | mandatory | This attribute counts the total number of cells containing modem data received from the interface while the channel was seized. A CCS channel is always conside… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.15.1.37 | ColumndclVsFramerFaxIdleCells | read-only | mandatory | This attribute counts the total number of cells containing silent fax data received from the interface which were not forwarded into the network, thus saving b… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.16 | TabledclVsFramerOperTable | not-accessible | mandatory | This group contains the operational data for a Svs Framer. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.16.1 | RowdclVsFramerOperEntry | not-accessible | mandatory | An entry in the dclVsFramerOperTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.16.1.1 | ColumndclVsFramerOpCurrentEncoding | read-only | mandatory | This attribute indicates the encoding currently being performed on this channel. g711 indicates that pulse code modulation (PCM) defined by ITU-T G.711 is bein… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.16.1.2 | ColumndclVsFramerCurrentRate | read-only | mandatory | This attribute indicates the current encoding rate for frames being sent to the network. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.16.1.3 | ColumndclVsFramerOpTptStatus | read-only | mandatory | This attribute indicates the current status of the tandem pass through algorithm. If tptStatus is operating, the tandem pass through algorithm is cutting throu… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.17 | TabledclVsFramerNegTable | not-accessible | mandatory | This group contains the attributes indicating the results of voice networking end to end negotiation. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1 | RowdclVsFramerNegEntry | not-accessible | mandatory | An entry in the dclVsFramerNegTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.1 | ColumndclVsFramerNegotiatedSilenceSuppression | read-write | mandatory | This attribute indicates the result of negotiating silence suppression with the remote end across the subnet. The parameter used for negotiating with the remot… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.2 | ColumndclVsFramerNegotiatedFisG711G726 | read-write | mandatory | This attribute indicates the result of negotiating G.711/G.726 fax idle suppression with the remote end across the subnet. The parameter used for negotiating w… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.3 | ColumndclVsFramerNegotiatedDtmfRegeneration | read-write | mandatory | This attribute indicates the result of negotiating DTMF regeneration with the remote end across the subnet. The parameter used for negotiating with the remote … |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.4 | ColumndclVsFramerNegotiatedV17AsG711G726 | read-only | mandatory | This attribute indicates how this SwitchedVoiceService negotiates with V.17 fax machines, as determined by negotiation with the remote end across the subnet. T… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.17.1.5 | ColumndclVsFramerNegotiatedTandemPassThrough | read-only | mandatory | This attribute indicates the result of negotiating tandem pass through with the remote end across the subnet. The parameter used for negotiating with the remot… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.315 | TabledclVsFramerFrmToNetworkTable | not-accessible | mandatory | This attribute counts the number of frames sent to the network at each encoding rate. Fax relay cells are not included. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.315.1 | RowdclVsFramerFrmToNetworkEntry | not-accessible | mandatory | An entry in the dclVsFramerFrmToNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.315.1.1 | ColumndclVsFramerFrmToNetworkIndex | not-accessible | mandatory | This variable represents the dclVsFramerFrmToNetworkTable specific index for the dclVsFramerFrmToNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.315.1.2 | ColumndclVsFramerFrmToNetworkValue | read-only | mandatory | This variable represents an individual value for the dclVsFramerFrmToNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.316 | TabledclVsFramerFrmFromNetworkTable | not-accessible | mandatory | This attribute counts the number of frames received from the network at each encoding rate. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.316.1 | RowdclVsFramerFrmFromNetworkEntry | not-accessible | mandatory | An entry in the dclVsFramerFrmFromNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.316.1.1 | ColumndclVsFramerFrmFromNetworkIndex | not-accessible | mandatory | This variable represents the dclVsFramerFrmFromNetworkTable specific index for the dclVsFramerFrmFromNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.316.1.2 | ColumndclVsFramerFrmFromNetworkValue | read-only | mandatory | This variable represents an individual value for the dclVsFramerFrmFromNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.467 | TabledclVsFramerNEncodingTable | not-accessible | mandatory | This attribute indicates the results of negotiating audio call encodings for voice, modemFax and fax traffic with the remote end across the subnet. The paramet… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.467.1 | RowdclVsFramerNEncodingEntry | not-accessible | mandatory | An entry in the dclVsFramerNEncodingTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.467.1.1 | ColumndclVsFramerNEncodingIndex | not-accessible | mandatory | This variable represents the dclVsFramerNEncodingTable specific index for the dclVsFramerNEncodingTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.467.1.2 | ColumndclVsFramerNEncodingValue | read-write | mandatory | This variable represents an individual value for the dclVsFramerNEncodingTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.479 | TabledclVsFramerNRatesTable | not-accessible | mandatory | This attribute indicates the results of negotiating minimum and maximum rates for voice, modemFax and fax traffic with the remote end across the subnet. The pa… |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.479.1 | RowdclVsFramerNRatesEntry | not-accessible | mandatory | An entry in the dclVsFramerNRatesTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.479.1.1 | ColumndclVsFramerNRatesTrafficIndex | not-accessible | mandatory | This variable represents the next to last index for the dclVsFramerNRatesTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.479.1.2 | ColumndclVsFramerNRatesRateIndex | not-accessible | mandatory | This variable represents the final index for the dclVsFramerNRatesTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.2.479.1.3 | ColumndclVsFramerNRatesValue | read-write | mandatory | This variable represents an individual value for the dclVsFramerNRatesTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3 | NodedclVsLCo | |||
| 1.3.6.1.4.1.562.2.4.1.130.4.3.1 | TabledclVsLCoRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of dclVsLCo components. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1 | RowdclVsLCoRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single dclVsLCo component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1.1 | ColumndclVsLCoRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of dclVsLCo components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1.2 | ColumndclVsLCoComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1.4 | ColumndclVsLCoStorageType | read-only | mandatory | This variable represents the storage type value for the dclVsLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.1.1.10 | ColumndclVsLCoIndex | not-accessible | mandatory | This variable represents the index for the dclVsLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10 | TabledclVsLCoPathDataTable | not-accessible | mandatory | This group contains all operational attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1 | RowdclVsLCoPathDataEntry | not-accessible | mandatory | An entry in the dclVsLCoPathDataTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.1 | ColumndclVsLCoState | read-only | mandatory | This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end provisioned or the application ha… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.2 | ColumndclVsLCoOverrideRemoteName | read-write | mandatory | If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unloc… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.3 | ColumndclVsLCoEnd | read-only | mandatory | This attribute identifies whether this is the calling or called end of the path. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.4 | ColumndclVsLCoCostMetric | read-only | mandatory | This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was est… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.5 | ColumndclVsLCoDelayMetric | read-only | mandatory | This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the pa… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.6 | ColumndclVsLCoRoundTripDelay | read-only | mandatory | This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.7 | ColumndclVsLCoSetupPriority | read-only | mandatory | This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complem… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.8 | ColumndclVsLCoHoldingPriority | read-only | mandatory | This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.9 | ColumndclVsLCoRequiredTxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidt… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.10 | ColumndclVsLCoRequiredRxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth fo… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.11 | ColumndclVsLCoRequiredTrafficType | read-only | mandatory | This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one … |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.12 | ColumndclVsLCoPermittedTrunkTypes | read-only | mandatory | This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terr… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.13 | ColumndclVsLCoRequiredSecurity | read-only | mandatory | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secu… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.14 | ColumndclVsLCoRequiredCustomerParameter | read-only | mandatory | This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer define… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.15 | ColumndclVsLCoEmissionPriority | read-only | mandatory | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the e… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.16 | ColumndclVsLCoDiscardPriority | read-only | mandatory | This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying t… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.17 | ColumndclVsLCoPathType | read-only | mandatory | This attribute indicates whether the path for this PLC was determined automatically or by static provisioning. Normal pathTypes are selected automatically by R… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.18 | ColumndclVsLCoRetryCount | read-only | mandatory | This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.19 | ColumndclVsLCoPathFailureCount | read-only | mandatory | This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the path is up. If a path fails anytim… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.20 | ColumndclVsLCoReasonForNoRoute | read-only | mandatory | This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-expla… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.21 | ColumndclVsLCoLastTearDownReason | read-only | mandatory | This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This att… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.22 | ColumndclVsLCoPathFailureAction | read-only | mandatory | This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is di… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.23 | ColumndclVsLCoBumpPreference | read-only | mandatory | This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connect… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.24 | ColumndclVsLCoOptimization | read-only | mandatory | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as op… |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.10.1.25 | ColumndclVsLCoPathUpDateTime | read-only | mandatory | This is the time stamp when the current path was established or reestablished. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.11 | TabledclVsLCoStatsTable | not-accessible | mandatory | This group contains the operational statistics attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1 | RowdclVsLCoStatsEntry | not-accessible | mandatory | An entry in the dclVsLCoStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1.1 | ColumndclVsLCoPktsToNetwork | read-only | mandatory | This attribute counts the number of packets transmitted to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1.2 | ColumndclVsLCoBytesToNetwork | read-only | mandatory | This attribute counts the number of bytes sent to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1.3 | ColumndclVsLCoPktsFromNetwork | read-only | mandatory | This attribute counts the number of packets received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.11.1.4 | ColumndclVsLCoBytesFromNetwork | read-only | mandatory | This attribute counts the number of bytes received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.264 | TabledclVsLCoPathTable | not-accessible | mandatory | This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.264.1 | RowdclVsLCoPathEntry | not-accessible | mandatory | An entry in the dclVsLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.3.264.1.1 | ColumndclVsLCoPathValue | read-only | mandatory | This variable represents both the value and the index for the dclVsLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.10 | TabledclVsProvTable | not-accessible | mandatory | This group contains the provisionable attributes of a DcmeVs component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.10.1 | RowdclVsProvEntry | not-accessible | mandatory | An entry in the dclVsProvTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.10.1.1 | ColumndclVsVsType | read-write | mandatory | This attribute specifies the type of calls offered by this DcmeVs. If the value permanent64kVs is selected the 64 kbit/s call is established on the channel ass… |
| 1.3.6.1.4.1.562.2.4.1.130.4.11 | TabledclVsOperTable | not-accessible | mandatory | This group provides the operational attributes for the DcmeVoiceService component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.11.1 | RowdclVsOperEntry | not-accessible | mandatory | An entry in the dclVsOperTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.11.1.1 | ColumndclVsStatus | read-only | mandatory | This attribute indicates the current status of the channel. idle means that there is no call currently active on this channel. seized means that the channel ha… |
| 1.3.6.1.4.1.562.2.4.1.130.4.11.1.3 | ColumndclVsCallType | read-only | mandatory | This attribute indicates the type of call that this channel is currently carrying. If no call is active, then it displays the value for the last call. |
| 1.3.6.1.4.1.562.2.4.1.130.4.11.1.4 | ColumndclVsReceivedAbBits | read-only | mandatory | This attribute indicates the most recently received AB bits. |
| 1.3.6.1.4.1.562.2.4.1.130.4.11.1.5 | ColumndclVsTransmittedAbBits | read-only | mandatory | This attribute indicates the AB bits currently being transmitted. |
| 1.3.6.1.4.1.562.2.4.1.130.4.12 | TabledclVsStatsTable | not-accessible | mandatory | This group provides the operational attributes for the DcmeVoiceService component. |
| 1.3.6.1.4.1.562.2.4.1.130.4.12.1 | RowdclVsStatsEntry | not-accessible | mandatory | An entry in the dclVsStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.12.1.1 | ColumndclVsTotalCalls | read-only | mandatory | This attribute counts the call attempts processed on this channel (in both directions). This count includes both successful and unsuccessful calls. The value w… |
| 1.3.6.1.4.1.562.2.4.1.130.4.12.1.2 | ColumndclVsTotalCallSeconds | read-only | mandatory | This attribute counts the total number of seconds that this channel is handling a call. This is regardless of whether the call is successful or not. In other w… |
| 1.3.6.1.4.1.562.2.4.1.130.4.12.1.3 | ColumndclVsInvalidAbBits | read-only | mandatory | This attribute counts the number of invalid AB bits signals received from the ISC on this channel. The invalid bit setting is 00. This counter wraps to zero wh… |
| 1.3.6.1.4.1.562.2.4.1.130.4.13 | TabledclVsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.130.4.13.1 | RowdclVsStateEntry | not-accessible | mandatory | An entry in the dclVsStateTable. |
| 1.3.6.1.4.1.562.2.4.1.130.4.13.1.1 | ColumndclVsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.130.4.13.1.2 | ColumndclVsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.130.4.13.1.3 | ColumndclVsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.130.10 | TabledclProvTable | not-accessible | mandatory | This group contains the provisionable attributes of a DcmeLink. |
| 1.3.6.1.4.1.562.2.4.1.130.10.1 | RowdclProvEntry | not-accessible | mandatory | An entry in the dclProvTable. |
| 1.3.6.1.4.1.562.2.4.1.130.10.1.1 | ColumndclCommentText | read-write | mandatory | Use of this attribute is at the discretion of the system administrator. Typically, it specifies the name of the customer that is using this DcmeLink. |
| 1.3.6.1.4.1.562.2.4.1.130.10.1.2 | ColumndclRemoteNpi | read-write | mandatory | This attribute specifies the Numbering Plan Indicator used for the remoteDna attribute of this DcmeLink. |
| 1.3.6.1.4.1.562.2.4.1.130.10.1.3 | ColumndclRemoteDna | read-write | mandatory | This attribute specifies the Data Network Address (DNA) of the remote DcmeLink. This is the DNA of the peer DcmeLink to which the DcmeLink component establishe… |
| 1.3.6.1.4.1.562.2.4.1.130.10.1.4 | ColumndclDcme | read-write | mandatory | This attribute specifies the Dcme component that this DcmeLink belongs to. |
| 1.3.6.1.4.1.562.2.4.1.130.10.1.5 | ColumndclIdlePattern | read-write | mandatory | This attribute specifies an idlePattern in the channel received from the E1 interface, which is required to determine if the channel is active or not. When the… |
| 1.3.6.1.4.1.562.2.4.1.130.10.1.6 | ColumndclAlternateIdlePattern | read-write | mandatory | This attribute specifies an alternateIdlePattern in the channel received from the E1 interface, after the end of a 64kbit/s call. The value of this attribute s… |
| 1.3.6.1.4.1.562.2.4.1.130.11 | TabledclStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.130.11.1 | RowdclStateEntry | not-accessible | mandatory | An entry in the dclStateTable. |
| 1.3.6.1.4.1.562.2.4.1.130.11.1.1 | ColumndclAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.130.11.1.2 | ColumndclOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.130.11.1.3 | ColumndclUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.130.12 | TabledclOperTable | not-accessible | mandatory | This group provides the operational attributes for the DcmeLink component. |
| 1.3.6.1.4.1.562.2.4.1.130.12.1 | RowdclOperEntry | not-accessible | mandatory | An entry in the dclOperTable. |
| 1.3.6.1.4.1.562.2.4.1.130.12.1.1 | ColumndclActiveSpeechCalls | read-only | mandatory | This attribute indicates the number of speech calls that are currently in progress on this DcmeLink. |
| 1.3.6.1.4.1.562.2.4.1.130.12.1.2 | ColumndclActive3kHzCalls | read-only | mandatory | This attribute indicates the number of audio 3.1 kHz calls that are currently in progress on this DcmeLink. |
| 1.3.6.1.4.1.562.2.4.1.130.12.1.3 | ColumndclActive64kCalls | read-only | mandatory | This attribute indicates the number of unrestricted 64 kbit/s calls that are currently in progress on this DcmeLink. |
| 1.3.6.1.4.1.562.2.4.1.130.12.1.4 | ColumndclReceivedTrmSignal | read-only | mandatory | This attribute indicates the last TRM signal received from the ISC. The received TRM signal can be one of: Invalid (xxx): this signal should never be received,… |
| 1.3.6.1.4.1.562.2.4.1.130.12.1.5 | ColumndclTransmittedTrmSignal | read-only | mandatory | This attribute indicates the last TRM signal transmitted to the ISC. The transmitted TRM signal can be one of: Dcme normal (100): , this signal is allways tran… |
| 1.3.6.1.4.1.562.2.4.1.130.13 | TabledclStatsTable | not-accessible | mandatory | This group contains statistics for the DcmeLink component. |
| 1.3.6.1.4.1.562.2.4.1.130.13.1 | RowdclStatsEntry | not-accessible | mandatory | An entry in the dclStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.130.13.1.1 | ColumndclTotalSpeechCalls | read-only | mandatory | This attribute counts the total number of speech calls that have been handled by this DcmeLink, including rejected calls. This counter wraps to zero when it ex… |
| 1.3.6.1.4.1.562.2.4.1.130.13.1.2 | ColumndclTotal3kHzCalls | read-only | mandatory | This attribute counts the total number of audio 3.1 kHz calls that have been handled by this DcmeLink, including rejected calls. This counter wraps to zero whe… |
| 1.3.6.1.4.1.562.2.4.1.130.13.1.3 | ColumndclTotal64kCalls | read-only | mandatory | This attribute counts the total number of unrestricted 64 kbit/s calls that have been handled by this DcmeLink, including rejected calls. This counter wraps to… |
| 1.3.6.1.4.1.562.2.4.1.130.13.1.4 | ColumndclRejectedSpeechCalls | read-only | mandatory | This attribute counts the total number of speech calls that have been rejected by this DcmeLink because there was no preestablished LC available. This counter … |
| 1.3.6.1.4.1.562.2.4.1.130.13.1.5 | ColumndclRejected3kHzCalls | read-only | mandatory | This attribute counts the total number of audio 3.1 KHz calls that have been rejected by this DcmeLink because there was no preestablished LC available. This c… |
| 1.3.6.1.4.1.562.2.4.1.130.13.1.6 | ColumndclRejected64kCalls | read-only | mandatory | This attribute counts the total number of unrestricted 64 kbit/s calls that have been rejected by this DcmeLink. This counter wraps to zero when it reaches its… |
| 1.3.6.1.4.1.562.2.4.1.130.13.1.7 | ColumndclInvalidTrmSignals | read-only | mandatory | This attribute counts the number of invalid TRM/Maintenance signals received from the ISC by this DcmeLink. The most probable cause of an invalid TRM/Maintenan… |
| 1.3.6.1.4.1.562.2.4.2.134 | NodedcmeMIB | |||
| 1.3.6.1.4.1.562.2.4.2.134.1 | NodedcmeGroup | |||
| 1.3.6.1.4.1.562.2.4.2.134.1.5 | NodedcmeGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.134.1.5.2 | NodedcmeGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.134.1.5.2.2 | NodedcmeGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.134.3 | NodedcmeCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.134.3.5 | NodedcmeCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.134.3.5.2 | NodedcmeCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.134.3.5.2.2 | NodedcmeCapabilitiesBE01A |