Nortel-Magellan-Passport-FrameRelayDteMIB
318 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex PassportCounter64 RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | DashedHexString EnterpriseDateAndTime HexString Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.101 | NodefrDte | |||
| 1.3.6.1.4.1.562.2.4.1.101.1 | TablefrDteRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDte components. |
| 1.3.6.1.4.1.562.2.4.1.101.1.1 | RowfrDteRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDte component. |
| 1.3.6.1.4.1.562.2.4.1.101.1.1.1 | ColumnfrDteRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frDte components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.1.1.2 | ColumnfrDteComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.1.1.4 | ColumnfrDteStorageType | read-only | mandatory | This variable represents the storage type value for the frDte tables. |
| 1.3.6.1.4.1.562.2.4.1.101.1.1.10 | ColumnfrDteIndex | not-accessible | mandatory | This variable represents the index for the frDte tables. |
| 1.3.6.1.4.1.562.2.4.1.101.2 | NodefrDteFramer | |||
| 1.3.6.1.4.1.562.2.4.1.101.2.1 | TablefrDteFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteFramer components. |
| 1.3.6.1.4.1.562.2.4.1.101.2.1.1 | RowfrDteFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteFramer component. |
| 1.3.6.1.4.1.562.2.4.1.101.2.1.1.1 | ColumnfrDteFramerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frDteFramer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.2.1.1.2 | ColumnfrDteFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.2.1.1.4 | ColumnfrDteFramerStorageType | read-only | mandatory | This variable represents the storage type value for the frDteFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.101.2.1.1.10 | ColumnfrDteFramerIndex | not-accessible | mandatory | This variable represents the index for the frDteFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.101.2.10 | TablefrDteFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.101.2.10.1 | RowfrDteFramerProvEntry | not-accessible | mandatory | An entry in the frDteFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.2.10.1.1 | ColumnfrDteFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.101.2.12 | TablefrDteFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.101.2.12.1 | RowfrDteFramerStateEntry | not-accessible | mandatory | An entry in the frDteFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.101.2.12.1.1 | ColumnfrDteFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.101.2.12.1.2 | ColumnfrDteFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.101.2.12.1.3 | ColumnfrDteFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.101.2.13 | TablefrDteFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1 | RowfrDteFramerStatsEntry | not-accessible | mandatory | An entry in the frDteFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.1 | ColumnfrDteFramerFrmToIf | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly t… |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.2 | ColumnfrDteFramerFrmFromIf | read-only | mandatory | This attribute counts the number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.3 | ColumnfrDteFramerAborts | read-only | mandatory | This attribute counts the total number of aborts received. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.4 | ColumnfrDteFramerCrcErrors | read-only | mandatory | This attribute counts the total number of frames with CRC errors. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.5 | ColumnfrDteFramerLrcErrors | read-only | mandatory | This attribute counts the total number of frames with LRC errors. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.6 | ColumnfrDteFramerNonOctetErrors | read-only | mandatory | This attribute counts the total number of frames that were non octet aligned. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.7 | ColumnfrDteFramerOverruns | read-only | mandatory | This attribute counts the total number of frames received from the link for which overruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.8 | ColumnfrDteFramerUnderruns | read-only | mandatory | This attribute counts the total number of frames transmitted to the link for which underruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.101.2.13.1.9 | ColumnfrDteFramerLargeFrmErrors | read-only | mandatory | This attribute counts the total number of frames received which were too large. The frame exceeded the maximumFrameLengthLimit provisioned attribute or it cont… |
| 1.3.6.1.4.1.562.2.4.1.101.2.14 | TablefrDteFramerUtilTable | not-accessible | mandatory | This group contains the link utilization operational data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.101.2.14.1 | RowfrDteFramerUtilEntry | not-accessible | mandatory | An entry in the frDteFramerUtilTable. |
| 1.3.6.1.4.1.562.2.4.1.101.2.14.1.1 | ColumnfrDteFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal priority data sent to the link as a percentage of the available bandwidth on the link. The utilization is the a… |
| 1.3.6.1.4.1.562.2.4.1.101.2.14.1.3 | ColumnfrDteFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal priority data received from the link as a percentage of the available bandwidth on the link. The utilization is… |
| 1.3.6.1.4.1.562.2.4.1.101.3 | NodefrDteLmi | |||
| 1.3.6.1.4.1.562.2.4.1.101.3.1 | TablefrDteLmiRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteLmi components. |
| 1.3.6.1.4.1.562.2.4.1.101.3.1.1 | RowfrDteLmiRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteLmi component. |
| 1.3.6.1.4.1.562.2.4.1.101.3.1.1.1 | ColumnfrDteLmiRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frDteLmi components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.3.1.1.2 | ColumnfrDteLmiComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.3.1.1.4 | ColumnfrDteLmiStorageType | read-only | mandatory | This variable represents the storage type value for the frDteLmi tables. |
| 1.3.6.1.4.1.562.2.4.1.101.3.1.1.10 | ColumnfrDteLmiIndex | not-accessible | mandatory | This variable represents the index for the frDteLmi tables. |
| 1.3.6.1.4.1.562.2.4.1.101.3.10 | TablefrDteLmiProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the Lmi component. |
| 1.3.6.1.4.1.562.2.4.1.101.3.10.1 | RowfrDteLmiProvEntry | not-accessible | mandatory | An entry in the frDteLmiProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.3.10.1.1 | ColumnfrDteLmiProcedures | read-write | mandatory | This attribute selects the Local Management Interface (LMI) protocol to be used on the interface. This attribute is equivalent to the SNMP variable frDlcmiStat… |
| 1.3.6.1.4.1.562.2.4.1.101.3.10.1.4 | ColumnfrDteLmiPollingInterval | read-write | mandatory | This is the number of seconds between successive status enquiry messages. This field corresponds to the parameter T391 described in the ANSI T1.617-1991 Annex … |
| 1.3.6.1.4.1.562.2.4.1.101.3.10.1.5 | ColumnfrDteLmiFullEnquiryInterval | read-write | mandatory | The count of status polls before a full status enquiry message is issued. Every nth poll will request a full status. This field corresponds to the parameter N3… |
| 1.3.6.1.4.1.562.2.4.1.101.3.10.1.6 | ColumnfrDteLmiErrorThreshold | read-write | mandatory | The number of errors detected within the monitored events window before declaring the link non-functional. This field corresponds to the parameter N392 describ… |
| 1.3.6.1.4.1.562.2.4.1.101.3.10.1.7 | ColumnfrDteLmiMonitoredEvents | read-write | mandatory | The number of status polling intervals over which the errorthreshold is counted This is used to determine if the errorThreshold is exceeded. This field corresp… |
| 1.3.6.1.4.1.562.2.4.1.101.3.11 | TablefrDteLmiOperTable | not-accessible | mandatory | This group contains the operational attributes for the Lmi component. |
| 1.3.6.1.4.1.562.2.4.1.101.3.11.1 | RowfrDteLmiOperEntry | not-accessible | mandatory | An entry in the frDteLmiOperTable. |
| 1.3.6.1.4.1.562.2.4.1.101.3.11.1.2 | ColumnfrDteLmiLmiStatus | read-only | mandatory | This indicates the status of the Frame Relay interface as determined by the performance of the link management interface (LMI). If no LMI is running, lmiStatus… |
| 1.3.6.1.4.1.562.2.4.1.101.4 | NodefrDteRg | |||
| 1.3.6.1.4.1.562.2.4.1.101.4.1 | TablefrDteRgRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteRg components. |
| 1.3.6.1.4.1.562.2.4.1.101.4.1.1 | RowfrDteRgRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteRg component. |
| 1.3.6.1.4.1.562.2.4.1.101.4.1.1.1 | ColumnfrDteRgRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frDteRg components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.4.1.1.2 | ColumnfrDteRgComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.4.1.1.4 | ColumnfrDteRgStorageType | read-only | mandatory | This variable represents the storage type value for the frDteRg tables. |
| 1.3.6.1.4.1.562.2.4.1.101.4.1.1.10 | ColumnfrDteRgIndex | not-accessible | mandatory | This variable represents the index for the frDteRg tables. |
| 1.3.6.1.4.1.562.2.4.1.101.4.10 | TablefrDteRgIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.101.4.10.1 | RowfrDteRgIfEntryEntry | not-accessible | mandatory | An entry in the frDteRgIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.10.1.1 | ColumnfrDteRgIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.101.4.10.1.2 | ColumnfrDteRgIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.101.4.11 | TablefrDteRgProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the Remote Group component. |
| 1.3.6.1.4.1.562.2.4.1.101.4.11.1 | RowfrDteRgProvEntry | not-accessible | mandatory | An entry in the frDteRgProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.11.1.1 | ColumnfrDteRgMaxTransmissionUnit | read-write | mandatory | The Maximum Transmission Unit size of the largest datagram (including Frame Relay header) which can be sent on the interface. |
| 1.3.6.1.4.1.562.2.4.1.101.4.12 | TablefrDteRgMpTable | not-accessible | mandatory | This group contains the base provisioning data for the Media Application component. |
| 1.3.6.1.4.1.562.2.4.1.101.4.12.1 | RowfrDteRgMpEntry | not-accessible | mandatory | An entry in the frDteRgMpTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.12.1.1 | ColumnfrDteRgLinkToProtocolPort | read-write | mandatory | This attribute contains a protocol port component name. The attribute associates the application with a protocol port. |
| 1.3.6.1.4.1.562.2.4.1.101.4.13 | TablefrDteRgStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.101.4.13.1 | RowfrDteRgStateEntry | not-accessible | mandatory | An entry in the frDteRgStateTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.13.1.1 | ColumnfrDteRgAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.101.4.13.1.2 | ColumnfrDteRgOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.101.4.13.1.3 | ColumnfrDteRgUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.101.4.14 | TablefrDteRgOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.101.4.14.1 | RowfrDteRgOperStatusEntry | not-accessible | mandatory | An entry in the frDteRgOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.14.1.1 | ColumnfrDteRgSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.101.4.15 | NodefrDteRgBfr | |||
| 1.3.6.1.4.1.562.2.4.1.101.4.15.1 | TablefrDteRgBfrRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteRgBfr components. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.1.1 | RowfrDteRgBfrRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteRgBfr component. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.1.1.1 | ColumnfrDteRgBfrRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frDteRgBfr components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.1.1.2 | ColumnfrDteRgBfrComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.1.1.4 | ColumnfrDteRgBfrStorageType | read-only | mandatory | This variable represents the storage type value for the frDteRgBfr tables. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.1.1.10 | ColumnfrDteRgBfrIndex | not-accessible | mandatory | This variable represents the index for the frDteRgBfr tables. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.10 | TablefrDteRgBfrProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the Bfr component. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.10.1 | RowfrDteRgBfrProvEntry | not-accessible | mandatory | An entry in the frDteRgBfrProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.10.1.1 | ColumnfrDteRgBfrMacType | read-write | mandatory | This attribute specifies the MAC address type of the Bfr component. The value must be chosen based on the media of the traffic source. For traffic originated f… |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.10.1.2 | ColumnfrDteRgBfrBfrIndex | read-write | mandatory | This attribute specifies the value which is used to derive a unique MAC address for the Bfr. The bfrIndex must be unique across all Bfrs on the same Lp. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.11 | TablefrDteRgBfrOprTable | not-accessible | mandatory | This group contains the operational attributes for the Bfr component.. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.11.1 | RowfrDteRgBfrOprEntry | not-accessible | mandatory | An entry in the frDteRgBfrOprTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.15.11.1.1 | ColumnfrDteRgBfrMacAddr | read-only | mandatory | This attribute indicates the unique MAC address of the Bfr component. This value is derived by the value of the attribute bfrIndex. The value is displayed as c… |
| 1.3.6.1.4.1.562.2.4.1.101.4.219 | TablefrDteRgLtDlciTable | not-accessible | mandatory | This attribute associates a Rg component with zero or more StDlci components. The Rg and StDlci components must be under the same FrDte component. |
| 1.3.6.1.4.1.562.2.4.1.101.4.219.1 | RowfrDteRgLtDlciEntry | not-accessible | mandatory | An entry in the frDteRgLtDlciTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.219.1.1 | ColumnfrDteRgLtDlciValue | read-write | mandatory | This variable represents both the value and the index for the frDteRgLtDlciTable. |
| 1.3.6.1.4.1.562.2.4.1.101.4.219.1.2 | ColumnfrDteRgLtDlciRowStatus | write-only | mandatory | This variable is used to control the addition and deletion of individual values of the frDteRgLtDlciTable. |
| 1.3.6.1.4.1.562.2.4.1.101.5 | NodefrDteDynDlciDefs | |||
| 1.3.6.1.4.1.562.2.4.1.101.5.1 | TablefrDteDynDlciDefsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteDynDlciDefs components. |
| 1.3.6.1.4.1.562.2.4.1.101.5.1.1 | RowfrDteDynDlciDefsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteDynDlciDefs component. |
| 1.3.6.1.4.1.562.2.4.1.101.5.1.1.1 | ColumnfrDteDynDlciDefsRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frDteDynDlciDefs components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.5.1.1.2 | ColumnfrDteDynDlciDefsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.5.1.1.4 | ColumnfrDteDynDlciDefsStorageType | read-only | mandatory | This variable represents the storage type value for the frDteDynDlciDefs tables. |
| 1.3.6.1.4.1.562.2.4.1.101.5.1.1.10 | ColumnfrDteDynDlciDefsIndex | not-accessible | mandatory | This variable represents the index for the frDteDynDlciDefs tables. |
| 1.3.6.1.4.1.562.2.4.1.101.5.10 | TablefrDteDynDlciDefsProvTable | not-accessible | mandatory | This group contains the provisioned attributes for a virtual circuit. These attributes represent the default settings for the resulting Dlci components and can… |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1 | RowfrDteDynDlciDefsProvEntry | not-accessible | mandatory | An entry in the frDteDynDlciDefsProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1.1 | ColumnfrDteDynDlciDefsStdRowStatus | read-write | mandatory | This attribute is used to manage the status of a StDlci component. Set to active to enable the StDlci component. Set to notInService to disable the StDlci comp… |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1.2 | ColumnfrDteDynDlciDefsRateEnforcement | read-write | mandatory | This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user … |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1.3 | ColumnfrDteDynDlciDefsCommittedInformationRate | read-write | mandatory | The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead. |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1.4 | ColumnfrDteDynDlciDefsCommittedBurst | read-write | mandatory | The committed burst size (in bits) to which the DLCI wants to subscribe. |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1.5 | ColumnfrDteDynDlciDefsExcessBurst | read-write | mandatory | The excess burst size (in bits) to which the DLCI wants to subscribe. |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1.6 | ColumnfrDteDynDlciDefsExcessBurstAction | read-write | mandatory | This attribute specifies the action taken when the committedBurst size has been exceeded on the DLCI but the excessBurst size has not. If the attribute is set … |
| 1.3.6.1.4.1.562.2.4.1.101.5.10.1.7 | ColumnfrDteDynDlciDefsIpCos | read-write | mandatory | This attribute specifies the initial Class of Service (CoS) given to each packet received on the on the virtual circuit identified by the dlci. The CoS value n… |
| 1.3.6.1.4.1.562.2.4.1.101.6 | NodefrDteStDlci | |||
| 1.3.6.1.4.1.562.2.4.1.101.6.1 | TablefrDteStDlciRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteStDlci components. |
| 1.3.6.1.4.1.562.2.4.1.101.6.1.1 | RowfrDteStDlciRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteStDlci component. |
| 1.3.6.1.4.1.562.2.4.1.101.6.1.1.1 | ColumnfrDteStDlciRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frDteStDlci components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.6.1.1.2 | ColumnfrDteStDlciComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.6.1.1.4 | ColumnfrDteStDlciStorageType | read-only | mandatory | This variable represents the storage type value for the frDteStDlci tables. |
| 1.3.6.1.4.1.562.2.4.1.101.6.1.1.10 | ColumnfrDteStDlciIndex | not-accessible | mandatory | This variable represents the index for the frDteStDlci tables. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2 | NodefrDteStDlciHq | |||
| 1.3.6.1.4.1.562.2.4.1.101.6.2.1 | TablefrDteStDlciHqRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteStDlciHq components. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.1.1 | RowfrDteStDlciHqRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteStDlciHq component. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.1.1.1 | ColumnfrDteStDlciHqRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frDteStDlciHq components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.1.1.2 | ColumnfrDteStDlciHqComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.1.1.4 | ColumnfrDteStDlciHqStorageType | read-only | mandatory | This variable represents the storage type value for the frDteStDlciHq tables. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.1.1.10 | ColumnfrDteStDlciHqIndex | not-accessible | mandatory | This variable represents the index for the frDteStDlciHq tables. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.10 | TablefrDteStDlciHqProvTable | not-accessible | mandatory | This group contains the Link Emission Queue provisioned attributes. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.10.1 | RowfrDteStDlciHqProvEntry | not-accessible | mandatory | An entry in the frDteStDlciHqProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.10.1.1 | ColumnfrDteStDlciHqMaxPackets | read-write | mandatory | This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of p… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.10.1.2 | ColumnfrDteStDlciHqMaxMsecData | read-write | mandatory | This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be cal… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.10.1.3 | ColumnfrDteStDlciHqMaxPercentMulticast | read-write | mandatory | This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated val… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.10.1.4 | ColumnfrDteStDlciHqTimeToLive | read-write | mandatory | This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.11 | TablefrDteStDlciHqStatsTable | not-accessible | mandatory | This group contains HibernationQueue general statistics. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.11.1 | RowfrDteStDlciHqStatsEntry | not-accessible | mandatory | An entry in the frDteStDlciHqStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.11.1.1 | ColumnfrDteStDlciHqTimedOutPkt | read-only | mandatory | This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its ma… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.11.1.2 | ColumnfrDteStDlciHqQueuePurgeDiscards | read-only | mandatory | This attribute counts the total number of packets discarded by a queue purge which occurs when the Dlci goes down. This counter will wrap around to 0 when it e… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.12 | TablefrDteStDlciHqTStatsTable | not-accessible | mandatory | This group contains Link Emission Queue total statistics. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.12.1 | RowfrDteStDlciHqTStatsEntry | not-accessible | mandatory | An entry in the frDteStDlciHqTStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.12.1.1 | ColumnfrDteStDlciHqTotalPktHandled | read-only | mandatory | This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.12.1.2 | ColumnfrDteStDlciHqTotalPktForwarded | read-only | mandatory | This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.12.1.3 | ColumnfrDteStDlciHqTotalPktQueued | read-only | mandatory | This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it excee… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.12.1.4 | ColumnfrDteStDlciHqTotalMulticastPkt | read-only | mandatory | This attribute counts the total number of multicast packets handled by this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum c… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.12.1.5 | ColumnfrDteStDlciHqTotalPktDiscards | read-only | mandatory | This attribute counts the total number of packets that were discarded for this instance of FrDte. This is the sum of timedOutPkt, forcedPktDiscards, queuePurge… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.13 | TablefrDteStDlciHqCStatsTable | not-accessible | mandatory | This group contains Link Emission Queue current statistics. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.13.1 | RowfrDteStDlciHqCStatsEntry | not-accessible | mandatory | An entry in the frDteStDlciHqCStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.13.1.1 | ColumnfrDteStDlciHqCurrentPktQueued | read-only | mandatory | This attribute contains the current number of packets queued. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.13.1.2 | ColumnfrDteStDlciHqCurrentBytesQueued | read-only | mandatory | This attribute contains the current number of bytes queued. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.13.1.3 | ColumnfrDteStDlciHqCurrentMulticastQueued | read-only | mandatory | This attribute counts the current number of multicast packets in the queue. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14 | TablefrDteStDlciHqThrStatsTable | not-accessible | mandatory | This group contains Link Emission Queue threshold statistics. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14.1 | RowfrDteStDlciHqThrStatsEntry | not-accessible | mandatory | An entry in the frDteStDlciHqThrStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14.1.1 | ColumnfrDteStDlciHqQueuePktThreshold | read-only | mandatory | This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will … |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14.1.2 | ColumnfrDteStDlciHqPktThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maxim… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14.1.3 | ColumnfrDteStDlciHqQueueByteThreshold | read-only | mandatory | This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14.1.4 | ColumnfrDteStDlciHqByteThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maxi… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14.1.5 | ColumnfrDteStDlciHqQueueMulticastThreshold | read-only | mandatory | This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets. |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14.1.6 | ColumnfrDteStDlciHqMulThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its… |
| 1.3.6.1.4.1.562.2.4.1.101.6.2.14.1.7 | ColumnfrDteStDlciHqMemThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq … |
| 1.3.6.1.4.1.562.2.4.1.101.6.10 | TablefrDteStDlciProvTable | not-accessible | mandatory | This group contains the provisioned attributes for a virtual circuit. These attributes represent the default settings for the resulting Dlci components and can… |
| 1.3.6.1.4.1.562.2.4.1.101.6.10.1 | RowfrDteStDlciProvEntry | not-accessible | mandatory | An entry in the frDteStDlciProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.6.10.1.1 | ColumnfrDteStDlciStdRowStatus | read-write | mandatory | This attribute is used to manage the status of a StDlci component. Set to active to enable the StDlci component. Set to notInService to disable the StDlci comp… |
| 1.3.6.1.4.1.562.2.4.1.101.6.10.1.2 | ColumnfrDteStDlciRateEnforcement | read-write | mandatory | This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user … |
| 1.3.6.1.4.1.562.2.4.1.101.6.10.1.3 | ColumnfrDteStDlciCommittedInformationRate | read-write | mandatory | The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead. |
| 1.3.6.1.4.1.562.2.4.1.101.6.10.1.4 | ColumnfrDteStDlciCommittedBurst | read-write | mandatory | The committed burst size (in bits) to which the DLCI wants to subscribe. |
| 1.3.6.1.4.1.562.2.4.1.101.6.10.1.5 | ColumnfrDteStDlciExcessBurst | read-write | mandatory | The excess burst size (in bits) to which the DLCI wants to subscribe. |
| 1.3.6.1.4.1.562.2.4.1.101.6.10.1.6 | ColumnfrDteStDlciExcessBurstAction | read-write | mandatory | This attribute specifies the action taken when the committedBurst size has been exceeded on the DLCI but the excessBurst size has not. If the attribute is set … |
| 1.3.6.1.4.1.562.2.4.1.101.6.10.1.7 | ColumnfrDteStDlciIpCos | read-write | mandatory | This attribute specifies the initial Class of Service (CoS) given to each packet received on the on the virtual circuit identified by the dlci. The CoS value n… |
| 1.3.6.1.4.1.562.2.4.1.101.6.11 | TablefrDteStDlciRgLinkTable | not-accessible | mandatory | This group provides the link between a Dlci and a remoteGroup. |
| 1.3.6.1.4.1.562.2.4.1.101.6.11.1 | RowfrDteStDlciRgLinkEntry | not-accessible | mandatory | An entry in the frDteStDlciRgLinkTable. |
| 1.3.6.1.4.1.562.2.4.1.101.6.11.1.1 | ColumnfrDteStDlciLinkToRemoteGroup | read-write | mandatory | This attribute associates a StDlci component with a Rg component. Provisioned StDlci components must be linked to a Rg component which is under the same FrDte … |
| 1.3.6.1.4.1.562.2.4.1.101.7 | NodefrDteLeq | |||
| 1.3.6.1.4.1.562.2.4.1.101.7.1 | TablefrDteLeqRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteLeq components. |
| 1.3.6.1.4.1.562.2.4.1.101.7.1.1 | RowfrDteLeqRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteLeq component. |
| 1.3.6.1.4.1.562.2.4.1.101.7.1.1.1 | ColumnfrDteLeqRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frDteLeq components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.7.1.1.2 | ColumnfrDteLeqComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.7.1.1.4 | ColumnfrDteLeqStorageType | read-only | mandatory | This variable represents the storage type value for the frDteLeq tables. |
| 1.3.6.1.4.1.562.2.4.1.101.7.1.1.10 | ColumnfrDteLeqIndex | not-accessible | mandatory | This variable represents the index for the frDteLeq tables. |
| 1.3.6.1.4.1.562.2.4.1.101.7.10 | TablefrDteLeqProvTable | not-accessible | mandatory | This group contains the Link Emission Queue provisioned attributes. |
| 1.3.6.1.4.1.562.2.4.1.101.7.10.1 | RowfrDteLeqProvEntry | not-accessible | mandatory | An entry in the frDteLeqProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.7.10.1.1 | ColumnfrDteLeqMaxPackets | read-write | mandatory | This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of p… |
| 1.3.6.1.4.1.562.2.4.1.101.7.10.1.2 | ColumnfrDteLeqMaxMsecData | read-write | mandatory | This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be cal… |
| 1.3.6.1.4.1.562.2.4.1.101.7.10.1.3 | ColumnfrDteLeqMaxPercentMulticast | read-write | mandatory | This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated val… |
| 1.3.6.1.4.1.562.2.4.1.101.7.10.1.4 | ColumnfrDteLeqTimeToLive | read-write | mandatory | This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded. |
| 1.3.6.1.4.1.562.2.4.1.101.7.11 | TablefrDteLeqStatsTable | not-accessible | mandatory | This group contains Link Emission Queue general statistics. |
| 1.3.6.1.4.1.562.2.4.1.101.7.11.1 | RowfrDteLeqStatsEntry | not-accessible | mandatory | An entry in the frDteLeqStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.7.11.1.1 | ColumnfrDteLeqTimedOutPkt | read-only | mandatory | This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its ma… |
| 1.3.6.1.4.1.562.2.4.1.101.7.11.1.2 | ColumnfrDteLeqHardwareForcedPkt | read-only | mandatory | This attribute counts the number of hardware forced packets on this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.7.11.1.3 | ColumnfrDteLeqForcedPktDiscards | read-only | mandatory | This attribute counts the total number of hardware forced packets that had to be discarded due to link failure. This counter will wrap around to 0 when it exce… |
| 1.3.6.1.4.1.562.2.4.1.101.7.11.1.4 | ColumnfrDteLeqQueuePurgeDiscards | read-only | mandatory | This attribute counts the total number of packets discarded by a queue purge (i.e. a discarding of all packets on the queue). This counter will wrap around to … |
| 1.3.6.1.4.1.562.2.4.1.101.7.12 | TablefrDteLeqTStatsTable | not-accessible | mandatory | This group contains Link Emission Queue total statistics. |
| 1.3.6.1.4.1.562.2.4.1.101.7.12.1 | RowfrDteLeqTStatsEntry | not-accessible | mandatory | An entry in the frDteLeqTStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.7.12.1.1 | ColumnfrDteLeqTotalPktHandled | read-only | mandatory | This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.7.12.1.2 | ColumnfrDteLeqTotalPktForwarded | read-only | mandatory | This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.7.12.1.3 | ColumnfrDteLeqTotalPktQueued | read-only | mandatory | This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it excee… |
| 1.3.6.1.4.1.562.2.4.1.101.7.12.1.4 | ColumnfrDteLeqTotalMulticastPkt | read-only | mandatory | This attribute counts the total number of multicast packets handled by this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum c… |
| 1.3.6.1.4.1.562.2.4.1.101.7.12.1.5 | ColumnfrDteLeqTotalPktDiscards | read-only | mandatory | This attribute counts the total number of packets that were discarded for this instance of FrDte. This is the sum of timedOutPkt, forcedPktDiscards, queuePurge… |
| 1.3.6.1.4.1.562.2.4.1.101.7.13 | TablefrDteLeqCStatsTable | not-accessible | mandatory | This group contains Link Emission Queue current statistics. |
| 1.3.6.1.4.1.562.2.4.1.101.7.13.1 | RowfrDteLeqCStatsEntry | not-accessible | mandatory | An entry in the frDteLeqCStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.7.13.1.1 | ColumnfrDteLeqCurrentPktQueued | read-only | mandatory | This attribute contains the current number of packets queued. |
| 1.3.6.1.4.1.562.2.4.1.101.7.13.1.2 | ColumnfrDteLeqCurrentBytesQueued | read-only | mandatory | This attribute contains the current number of bytes queued. |
| 1.3.6.1.4.1.562.2.4.1.101.7.13.1.3 | ColumnfrDteLeqCurrentMulticastQueued | read-only | mandatory | This attribute counts the current number of multicast packets in the queue. |
| 1.3.6.1.4.1.562.2.4.1.101.7.14 | TablefrDteLeqThrStatsTable | not-accessible | mandatory | This group contains Link Emission Queue threshold statistics. |
| 1.3.6.1.4.1.562.2.4.1.101.7.14.1 | RowfrDteLeqThrStatsEntry | not-accessible | mandatory | An entry in the frDteLeqThrStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.7.14.1.1 | ColumnfrDteLeqQueuePktThreshold | read-only | mandatory | This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will … |
| 1.3.6.1.4.1.562.2.4.1.101.7.14.1.2 | ColumnfrDteLeqPktThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maxim… |
| 1.3.6.1.4.1.562.2.4.1.101.7.14.1.3 | ColumnfrDteLeqQueueByteThreshold | read-only | mandatory | This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate. |
| 1.3.6.1.4.1.562.2.4.1.101.7.14.1.4 | ColumnfrDteLeqByteThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maxi… |
| 1.3.6.1.4.1.562.2.4.1.101.7.14.1.5 | ColumnfrDteLeqQueueMulticastThreshold | read-only | mandatory | This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets. |
| 1.3.6.1.4.1.562.2.4.1.101.7.14.1.6 | ColumnfrDteLeqMulThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its… |
| 1.3.6.1.4.1.562.2.4.1.101.7.14.1.7 | ColumnfrDteLeqMemThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq … |
| 1.3.6.1.4.1.562.2.4.1.101.8 | NodefrDteDlci | |||
| 1.3.6.1.4.1.562.2.4.1.101.8.1 | TablefrDteDlciRowStatusTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of frDteDlci components. |
| 1.3.6.1.4.1.562.2.4.1.101.8.1.1 | RowfrDteDlciRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteDlci component. |
| 1.3.6.1.4.1.562.2.4.1.101.8.1.1.1 | ColumnfrDteDlciRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frDteDlci components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.8.1.1.2 | ColumnfrDteDlciComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.8.1.1.4 | ColumnfrDteDlciStorageType | read-only | mandatory | This variable represents the storage type value for the frDteDlci tables. |
| 1.3.6.1.4.1.562.2.4.1.101.8.1.1.10 | ColumnfrDteDlciIndex | not-accessible | mandatory | This variable represents the index for the frDteDlci tables. |
| 1.3.6.1.4.1.562.2.4.1.101.8.10 | TablefrDteDlciStateTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribut… |
| 1.3.6.1.4.1.562.2.4.1.101.8.10.1 | RowfrDteDlciStateEntry | not-accessible | mandatory | An entry in the frDteDlciStateTable. |
| 1.3.6.1.4.1.562.2.4.1.101.8.10.1.1 | ColumnfrDteDlciAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.101.8.10.1.2 | ColumnfrDteDlciOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.101.8.10.1.3 | ColumnfrDteDlciUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.101.8.11 | TablefrDteDlciOperTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the Dlci component. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1 | RowfrDteDlciOperEntry | not-accessible | mandatory | An entry in the frDteDlciOperTable. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.4 | ColumnfrDteDlciDlciState | read-only | mandatory | This attribute reflects the current operational circuit state of the Dlci. The state active indicates that the circuit is up and inactive that the circuit is d… |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.5 | ColumnfrDteDlciLastTimeChange | read-only | mandatory | The last time dlciState changed state. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.7 | ColumnfrDteDlciSentFrames | read-only | mandatory | Number of frames transmitted across the interface. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.8 | ColumnfrDteDlciSentOctets | read-only | mandatory | The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.9 | ColumnfrDteDlciReceivedFrames | read-only | mandatory | Number of frames received across the interface. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.10 | ColumnfrDteDlciReceivedOctets | read-only | mandatory | The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.11 | ColumnfrDteDlciReceivedFECNs | read-only | mandatory | Number of frames with the FECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.12 | ColumnfrDteDlciReceivedBECNs | read-only | mandatory | Number of frames with the BECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.13 | ColumnfrDteDlciDiscardedFrames | read-only | mandatory | The number of inbound frames dropped because of format errors, or because the VC was inactive. This counter will wrap around to 0 when it exceeds its maximum c… |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.14 | ColumnfrDteDlciCreationType | read-only | mandatory | This indicates whether the virtual circuit was manually created (static), or dynamically created (dynamic) via the data link control management interface. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.15 | ColumnfrDteDlciCreationTime | read-only | mandatory | The time when the circuit was created, whether by the Data Link Connection Management Interface or by an SNMP set request. |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.17 | ColumnfrDteDlciRateEnforcement | read-write | mandatory | This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user … |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.18 | ColumnfrDteDlciCommittedInformationRate | read-write | mandatory | The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead. Sett… |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.19 | ColumnfrDteDlciCommittedBurst | read-write | mandatory | The committed burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the corresponding provisional value… |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.20 | ColumnfrDteDlciExcessBurst | read-write | mandatory | The excess burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the corresponding provisional value on… |
| 1.3.6.1.4.1.562.2.4.1.101.8.11.1.21 | ColumnfrDteDlciExcessBurstAction | read-write | mandatory | This attribute specifies the action taken when the committedBurst size has been exceeded on the Dlci but the excessBurst size has not. If the attribute is set … |
| 1.3.6.1.4.1.562.2.4.1.101.9 | NodefrDteVFramer | |||
| 1.3.6.1.4.1.562.2.4.1.101.9.1 | TablefrDteVFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frDteVFramer components. |
| 1.3.6.1.4.1.562.2.4.1.101.9.1.1 | RowfrDteVFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frDteVFramer component. |
| 1.3.6.1.4.1.562.2.4.1.101.9.1.1.1 | ColumnfrDteVFramerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frDteVFramer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.101.9.1.1.2 | ColumnfrDteVFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.101.9.1.1.4 | ColumnfrDteVFramerStorageType | read-only | mandatory | This variable represents the storage type value for the frDteVFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.101.9.1.1.10 | ColumnfrDteVFramerIndex | not-accessible | mandatory | This variable represents the index for the frDteVFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.101.9.10 | TablefrDteVFramerProvTable | not-accessible | mandatory | This group contains provisionable attributes for the VirtualFramer component. |
| 1.3.6.1.4.1.562.2.4.1.101.9.10.1 | RowfrDteVFramerProvEntry | not-accessible | mandatory | An entry in the frDteVFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.9.10.1.1 | ColumnfrDteVFramerOtherVirtualFramer | read-write | mandatory | This attribute specifies the other VirtualFramer to which the service is linked, for example, FrUni/n VirtualFramer, FrDte/n VirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.101.9.10.1.2 | ColumnfrDteVFramerLogicalProcessor | read-write | mandatory | This attribute specifies the logical processor on which the service component will reside. |
| 1.3.6.1.4.1.562.2.4.1.101.9.11 | TablefrDteVFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.101.9.11.1 | RowfrDteVFramerStateEntry | not-accessible | mandatory | An entry in the frDteVFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.101.9.11.1.1 | ColumnfrDteVFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.101.9.11.1.2 | ColumnfrDteVFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.101.9.11.1.3 | ColumnfrDteVFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.101.9.12 | TablefrDteVFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a VirtualFramer component. |
| 1.3.6.1.4.1.562.2.4.1.101.9.12.1 | RowfrDteVFramerStatsEntry | not-accessible | mandatory | An entry in the frDteVFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.9.12.1.2 | ColumnfrDteVFramerFrmToOtherVFramer | read-only | mandatory | This attribute counts the frames transmitted to the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.101.9.12.1.3 | ColumnfrDteVFramerFrmFromOtherVFramer | read-only | mandatory | This attribute counts the frames received from the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.101.9.12.1.5 | ColumnfrDteVFramerOctetFromOtherVFramer | read-only | mandatory | This attribute counts the octets received from the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.101.20 | TablefrDteCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.101.20.1 | RowfrDteCidDataEntry | not-accessible | mandatory | An entry in the frDteCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.101.20.1.1 | ColumnfrDteCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.101.21 | TablefrDteIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.101.21.1 | RowfrDteIfEntryEntry | not-accessible | mandatory | An entry in the frDteIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.101.21.1.1 | ColumnfrDteIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.101.21.1.2 | ColumnfrDteIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.101.22 | TablefrDteProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the FrDte component. |
| 1.3.6.1.4.1.562.2.4.1.101.22.1 | RowfrDteProvEntry | not-accessible | mandatory | An entry in the frDteProvTable. |
| 1.3.6.1.4.1.562.2.4.1.101.22.1.1 | ColumnfrDteAcceptUndefinedDlci | read-write | mandatory | This parameter allows previously undefined Data Link Connection Identifiers (DLCIs) to be dynamically accepted in the default remote group. If set to enabled, … |
| 1.3.6.1.4.1.562.2.4.1.101.23 | TablefrDteStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.101.23.1 | RowfrDteStateEntry | not-accessible | mandatory | An entry in the frDteStateTable. |
| 1.3.6.1.4.1.562.2.4.1.101.23.1.1 | ColumnfrDteAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.101.23.1.2 | ColumnfrDteOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.101.23.1.3 | ColumnfrDteUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.101.24 | TablefrDteOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.101.24.1 | RowfrDteOperStatusEntry | not-accessible | mandatory | An entry in the frDteOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.101.24.1.1 | ColumnfrDteSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.101.25 | TablefrDteOperTable | not-accessible | mandatory | This group contains the operational attributes for the FrDte component. |
| 1.3.6.1.4.1.562.2.4.1.101.25.1 | RowfrDteOperEntry | not-accessible | mandatory | An entry in the frDteOperTable. |
| 1.3.6.1.4.1.562.2.4.1.101.25.1.1 | ColumnfrDteLinkOperState | read-only | mandatory | This attribute describes the operational state of the Link Control protocol. If the interface to the physical link hardware is inactive, the linkOperState is i… |
| 1.3.6.1.4.1.562.2.4.1.101.26 | TablefrDteErrTable | not-accessible | mandatory | This group contains the SNMP frErrEntry attributes for the FrDte component. |
| 1.3.6.1.4.1.562.2.4.1.101.26.1 | RowfrDteErrEntry | not-accessible | mandatory | An entry in the frDteErrTable. |
| 1.3.6.1.4.1.562.2.4.1.101.26.1.2 | ColumnfrDteErrType | read-only | mandatory | The type of error that was last seen on this interface. The error types are as follows: receiveShort: This error indicates a received frame was discarded becau… |
| 1.3.6.1.4.1.562.2.4.1.101.26.1.3 | ColumnfrDteErrData | read-only | mandatory | An octet string containing the first part of the frame in which an error was last detected. |
| 1.3.6.1.4.1.562.2.4.1.101.26.1.4 | ColumnfrDteErrTime | read-only | mandatory | The time at which the last error was detected and recorded in errType. |
| 1.3.6.1.4.1.562.2.4.1.101.26.1.6 | ColumnfrDteErrDiscards | read-only | mandatory | Number of inbound frames dropped because of format errors or because the virtual circuit was not known. Format errors, in this case, are any errors which would… |
| 1.3.6.1.4.1.562.2.4.1.101.26.1.7 | ColumnfrDteErrFaults | read-only | mandatory | This attribute counts the number of times LMI has taken down the interface. When the procedure attribute of the Lmi component is set to none, this counter will… |
| 1.3.6.1.4.1.562.2.4.1.101.26.1.8 | ColumnfrDteErrFaultTime | read-only | mandatory | The last time the errFaults counter was incremented. |
| 1.3.6.1.4.1.562.2.4.1.101.27 | TablefrDteErrStatsTable | not-accessible | mandatory | This group contains error counters for the FrDte. |
| 1.3.6.1.4.1.562.2.4.1.101.27.1 | RowfrDteErrStatsEntry | not-accessible | mandatory | An entry in the frDteErrStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.1 | ColumnfrDteXmitDiscardPvcDown | read-only | mandatory | Count of transmitted frames discarded because the Dlci or a component positioned in a hierarchically fashion above it (e.g. it's remote group or the FrDte comp… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.2 | ColumnfrDteXmitDiscardLmiInactive | read-only | mandatory | Count of transmitted frames discarded because the Local Management Interface (LMI) was not yet active (i.e. LMI was still in the polling state). This counter w… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.3 | ColumnfrDteXmitDiscardFramerDown | read-only | mandatory | Count of transmitted frames discarded because the framer component was down. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.4 | ColumnfrDteXmitDiscardPvcInactive | read-only | mandatory | Count of transmitted frames discarded because the Local Management Interface (LMI) had inactivated or invalidated the Dlci. This counter will wrap around to 0 … |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.5 | ColumnfrDteXmitDiscardCirExceeded | read-only | mandatory | Count of transmitted frames discarded because CIR was enabled on a Dlci without a HibernationQueue subcomponent and the traffic exceeded the combined Committed… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.6 | ColumnfrDteRecvDiscardPvcDown | read-only | mandatory | Count of received frames discarded because the Dlci or a component positioned in a hierarchically fashion above it (e.g. it's remote group or the FrDte compone… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.7 | ColumnfrDteRecvDiscardLmiInactive | read-only | mandatory | Count of received frames discarded because the Local Management Interface (LMI) was not yet active (i.e. LMI was still in the polling state). This counter will… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.8 | ColumnfrDteRecvDiscardPvcInactive | read-only | mandatory | Count of received frames discarded because the Local Management Interface (LMI) had inactivated or invalidated the Dlci. This counter will wrap around to 0 whe… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.9 | ColumnfrDteBadFc | read-only | mandatory | Count of received frames discarded because the frame control character was incorrect. This may indicate that the other side of the link is configured for a dif… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.10 | ColumnfrDteUlpUnknownProtocol | read-only | mandatory | Count of received frames discarded because the Upper Level Protocol (ULP) encapsulation used was unsupported. This counter will wrap around to 0 when it exceed… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.11 | ColumnfrDteDefragSequenceErrors | read-only | mandatory | Count of fragments received which were discarded due to out of sequence error detection. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.12 | ColumnfrDteReceiveShort | read-only | mandatory | Count of received frames (including LMI frames) discarded because they were less than four octets long or they were missing the Organizationally Unique Identif… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.13 | ColumnfrDteIllegalDlci | read-only | mandatory | Count of received frames discarded because their Q.922 address was not two octets in length. This count also includes frames discarded because they were receiv… |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.14 | ColumnfrDteDlcmiProtoErr | read-only | mandatory | Count of received LMI frames whose contents were formatted incorrectly. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.15 | ColumnfrDteDlcmiUnknownIe | read-only | mandatory | Count of received LMI frames which contained an unsupported Information Element (IE) type. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.16 | ColumnfrDteDlcmiSequenceErr | read-only | mandatory | Count of received LMI frames whose Keep Alive Sequence was incorrect. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.101.27.1.17 | ColumnfrDteDlcmiUnknownRpt | read-only | mandatory | Count of received LMI frames which contained a Report-type Information Element with an invalid type of report. This counter will wrap around to 0 when it excee… |
| 1.3.6.1.4.1.562.2.4.2.32 | NodeframeRelayDteMIB | |||
| 1.3.6.1.4.1.562.2.4.2.32.1 | NodeframeRelayDteGroup | |||
| 1.3.6.1.4.1.562.2.4.2.32.1.5 | NodeframeRelayDteGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.32.1.5.1 | NodeframeRelayDteGroupBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.32.1.5.1.2 | NodeframeRelayDteGroupBE00A | |||
| 1.3.6.1.4.1.562.2.4.2.32.3 | NodeframeRelayDteCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.32.3.5 | NodeframeRelayDteCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.32.3.5.1 | NodeframeRelayDteCapabilitiesBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.32.3.5.1.2 | NodeframeRelayDteCapabilitiesBE00A |