Nortel-Magellan-Passport-FrameRelayNniMIB
512 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex PassportCounter64 RowPointer RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString DigitString EnterpriseDateAndTime FixedPoint3 Hex HexString Link NonReplicated Unsigned64 |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.70 | NodefrNni | |||
| 1.3.6.1.4.1.562.2.4.1.70.1 | TablefrNniRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNni components. |
| 1.3.6.1.4.1.562.2.4.1.70.1.1 | RowfrNniRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNni component. |
| 1.3.6.1.4.1.562.2.4.1.70.1.1.1 | ColumnfrNniRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNni components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.1.1.2 | ColumnfrNniComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.1.1.4 | ColumnfrNniStorageType | read-only | mandatory | This variable represents the storage type value for the frNni tables. |
| 1.3.6.1.4.1.562.2.4.1.70.1.1.10 | ColumnfrNniIndex | not-accessible | mandatory | This variable represents the index for the frNni tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2 | NodefrNniDna | |||
| 1.3.6.1.4.1.562.2.4.1.70.2.1 | TablefrNniDnaRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDna components. |
| 1.3.6.1.4.1.562.2.4.1.70.2.1.1 | RowfrNniDnaRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDna component. |
| 1.3.6.1.4.1.562.2.4.1.70.2.1.1.1 | ColumnfrNniDnaRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frNniDna components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.2.1.1.2 | ColumnfrNniDnaComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.2.1.1.4 | ColumnfrNniDnaStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDna tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2.1.1.10 | ColumnfrNniDnaIndex | not-accessible | mandatory | This variable represents the index for the frNniDna tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2.2 | NodefrNniDnaCug | |||
| 1.3.6.1.4.1.562.2.4.1.70.2.2.1 | TablefrNniDnaCugRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDnaCug components. |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.1.1 | RowfrNniDnaCugRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDnaCug component. |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.1.1.1 | ColumnfrNniDnaCugRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNniDnaCug components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.1.1.2 | ColumnfrNniDnaCugComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.1.1.4 | ColumnfrNniDnaCugStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDnaCug tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.1.1.10 | ColumnfrNniDnaCugIndex | not-accessible | mandatory | This variable represents the index for the frNniDnaCug tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.10 | TablefrNniDnaCugCugOptionsTable | not-accessible | mandatory | Attributes in this group define ClosedUserGroup options associated with interlockCode. DNA's with the same CUG (interlockCode) can make calls within this group… |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.10.1 | RowfrNniDnaCugCugOptionsEntry | not-accessible | mandatory | An entry in the frNniDnaCugCugOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.10.1.1 | ColumnfrNniDnaCugType | read-write | mandatory | This attribute specifies the CUG type - the CUG is either a national CUG, or an international CUG. International closed user groups are usually established bet… |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.10.1.2 | ColumnfrNniDnaCugDnic | read-write | mandatory | This attribute specifies the dnic (Data Network ID Code) of the CUG by which packet networks are identified. This attribute is not applicable if the CUG is a n… |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.10.1.3 | ColumnfrNniDnaCugInterlockCode | read-write | mandatory | This attribute specifies the CUG identifier of a national or international CUG call. It is an arbitrary number and it also can be called CUG in some descriptio… |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.10.1.4 | ColumnfrNniDnaCugPreferential | read-write | mandatory | The attribute 'preferential', if set to yes indicates that this CUG is the SIMPLE CUG (as defined in ITU X.36 [10/96]), in which case it will be used during th… |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.10.1.5 | ColumnfrNniDnaCugOutCalls | read-write | mandatory | This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) can be made using this particular CUG. If set to a value of dis… |
| 1.3.6.1.4.1.562.2.4.1.70.2.2.10.1.6 | ColumnfrNniDnaCugIncCalls | read-write | mandatory | This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) can be made using this particular CUG. If set to disallowed, then… |
| 1.3.6.1.4.1.562.2.4.1.70.2.3 | NodefrNniDnaHgM | |||
| 1.3.6.1.4.1.562.2.4.1.70.2.3.1 | TablefrNniDnaHgMRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDnaHgM components. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.1.1 | RowfrNniDnaHgMRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDnaHgM component. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.1.1.1 | ColumnfrNniDnaHgMRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNniDnaHgM components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.1.1.2 | ColumnfrNniDnaHgMComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.1.1.4 | ColumnfrNniDnaHgMStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDnaHgM tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.1.1.10 | ColumnfrNniDnaHgMIndex | not-accessible | mandatory | This variable represents the index for the frNniDnaHgM tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2 | NodefrNniDnaHgMHgAddr | |||
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.1 | TablefrNniDnaHgMHgAddrRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDnaHgMHgAddr components. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.1.1 | RowfrNniDnaHgMHgAddrRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDnaHgMHgAddr component. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.1.1.1 | ColumnfrNniDnaHgMHgAddrRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNniDnaHgMHgAddr components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.1.1.2 | ColumnfrNniDnaHgMHgAddrComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.1.1.4 | ColumnfrNniDnaHgMHgAddrStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDnaHgMHgAddr tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.1.1.10 | ColumnfrNniDnaHgMHgAddrIndex | not-accessible | mandatory | This variable represents the index for the frNniDnaHgMHgAddr tables. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.10 | TablefrNniDnaHgMHgAddrAddrTable | not-accessible | mandatory | This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.10.1 | RowfrNniDnaHgMHgAddrAddrEntry | not-accessible | mandatory | An entry in the frNniDnaHgMHgAddrAddrTable. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.10.1.1 | ColumnfrNniDnaHgMHgAddrNumberingPlanIndicator | read-write | mandatory | This attribute indicates the Numbering Plan Indicator (NPI) of the DNA. The address may belong to X.121 or E.164 plans. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.2.10.1.2 | ColumnfrNniDnaHgMHgAddrDataNetworkAddress | read-write | mandatory | This attribute contains digits which form the unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where … |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.10 | TablefrNniDnaHgMIfTable | not-accessible | mandatory | This group contains the interface parameters between the HuntGroupMember and the hunt group server. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.10.1 | RowfrNniDnaHgMIfEntry | not-accessible | mandatory | An entry in the frNniDnaHgMIfTable. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.10.1.1 | ColumnfrNniDnaHgMAvailabilityUpdateThreshold | read-write | mandatory | This attribute specifies how much availableAggregateCIR can change before an Availability Message Packet (AMP) is sent to the hunt group server informing it of… |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.11 | TablefrNniDnaHgMOpTable | not-accessible | mandatory | This group contains the operational attributes of the HuntGroupMember component. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.11.1 | RowfrNniDnaHgMOpEntry | not-accessible | mandatory | An entry in the frNniDnaHgMOpTable. |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.11.1.1 | ColumnfrNniDnaHgMMaximumAvailableAggregateCir | read-only | mandatory | This attribute indicates the maximum aggregate CIR availability for this hunt group member. It is the sum of the maximum CIRs provisioned for SVCs in the FrUni… |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.11.1.2 | ColumnfrNniDnaHgMAvailableAggregateCir | read-only | mandatory | This attribute indicates the current available aggregate CIR reported to the hunt group in the Availability Message Packet (AMP). It is incremented by the appl… |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.11.1.3 | ColumnfrNniDnaHgMAvailabilityDelta | read-only | mandatory | This attribute indicates the net change in the available aggregate CIR since the last Availability Message Packet (AMP) was sent to the Hunt Group. Once the ab… |
| 1.3.6.1.4.1.562.2.4.1.70.2.3.11.1.5 | ColumnfrNniDnaHgMAvailableDlcis | read-only | mandatory | This attribute indicates the number of DLCIs available for SVCs on the interface associated with this DNA. If this value reaches 0, an AMP with zero availabili… |
| 1.3.6.1.4.1.562.2.4.1.70.2.10 | TablefrNniDnaAddressTable | not-accessible | mandatory | This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes. |
| 1.3.6.1.4.1.562.2.4.1.70.2.10.1 | RowfrNniDnaAddressEntry | not-accessible | mandatory | An entry in the frNniDnaAddressTable. |
| 1.3.6.1.4.1.562.2.4.1.70.2.10.1.1 | ColumnfrNniDnaNumberingPlanIndicator | read-write | mandatory | This attribute indicates the Numbering Plan Indicator (NPI) of the DNA that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet swi… |
| 1.3.6.1.4.1.562.2.4.1.70.2.10.1.2 | ColumnfrNniDnaDataNetworkAddress | read-write | mandatory | This attribute indicates the customer's unique identifier. It is the equivalent of the telephone number in the telephone network. |
| 1.3.6.1.4.1.562.2.4.1.70.2.11 | TablefrNniDnaOutgoingOptionsTable | not-accessible | mandatory | This group defines DNA call options for calls made from the interface. These options are not used for calls arriving to the interface represented by this DNA. |
| 1.3.6.1.4.1.562.2.4.1.70.2.11.1 | RowfrNniDnaOutgoingOptionsEntry | not-accessible | mandatory | An entry in the frNniDnaOutgoingOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.2.11.1.7 | ColumnfrNniDnaOutDefaultPriority | read-write | mandatory | This attribute indicates the default priority of outgoing calls from the DTE to the network. It can be overridden by the discardPriority under DLCI Direct Call… |
| 1.3.6.1.4.1.562.2.4.1.70.2.11.1.11 | ColumnfrNniDnaOutDefaultPathSensitivity | read-write | obsolete | This attribute specifies the default class of path sensitivity to network for all outgoing calls that use this DNA. The chosen default class of path sensitivit… |
| 1.3.6.1.4.1.562.2.4.1.70.2.11.1.12 | ColumnfrNniDnaOutPathSensitivityOverRide | read-write | obsolete | If this attribute is set to yes in the call request, the called end will use the calling end provisioning data on path sensitivity to override its own provisio… |
| 1.3.6.1.4.1.562.2.4.1.70.2.11.1.14 | ColumnfrNniDnaOutDefaultPathReliability | read-write | mandatory | This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) using this particular DNA. T… |
| 1.3.6.1.4.1.562.2.4.1.70.2.11.1.17 | ColumnfrNniDnaOutAccess | read-write | mandatory | This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that outgoing calls … |
| 1.3.6.1.4.1.562.2.4.1.70.2.11.1.18 | ColumnfrNniDnaDefaultTransferPriority | read-write | mandatory | This attribute specifies the default transfer priority for all outgoing calls using this particular DNA. It can be overridden by the transferPriority provision… |
| 1.3.6.1.4.1.562.2.4.1.70.2.11.1.19 | ColumnfrNniDnaTransferPriorityOverRide | read-write | mandatory | When this attribute is set to yes in the call request, the called end will use the calling end provisioning data on transfer priority to override its own provi… |
| 1.3.6.1.4.1.562.2.4.1.70.2.12 | TablefrNniDnaIncomingOptionsTable | not-accessible | mandatory | This group defines options for incoming calls. These options are used for calls arriving to the interface represented by this DNA. For calls originated from th… |
| 1.3.6.1.4.1.562.2.4.1.70.2.12.1 | RowfrNniDnaIncomingOptionsEntry | not-accessible | mandatory | An entry in the frNniDnaIncomingOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.2.12.1.9 | ColumnfrNniDnaIncAccess | read-write | mandatory | This attribute, if set to a value of allowed specifies that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permit… |
| 1.3.6.1.4.1.562.2.4.1.70.2.13 | TablefrNniDnaCallOptionsTable | not-accessible | mandatory | This group defines additional all options for not related to direction of the call. |
| 1.3.6.1.4.1.562.2.4.1.70.2.13.1 | RowfrNniDnaCallOptionsEntry | not-accessible | mandatory | An entry in the frNniDnaCallOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.2.13.1.10 | ColumnfrNniDnaAccountClass | read-write | mandatory | This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and r… |
| 1.3.6.1.4.1.562.2.4.1.70.2.13.1.11 | ColumnfrNniDnaAccountCollection | read-write | mandatory | This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the pa… |
| 1.3.6.1.4.1.562.2.4.1.70.2.13.1.12 | ColumnfrNniDnaServiceExchange | read-write | mandatory | This attribute is an arbitrary number, Data Service Exchange, as entered by the network operator and reported in accounting record. It is converted into an int… |
| 1.3.6.1.4.1.562.2.4.1.70.2.13.1.13 | ColumnfrNniDnaEgressAccounting | read-write | mandatory | This attribute specifies if egress accounting is enabled by the frame relay service. If egress accounting is disabled, only segment counts are collected by the… |
| 1.3.6.1.4.1.562.2.4.1.70.2.13.1.21 | ColumnfrNniDnaDataPath | read-write | mandatory | This attribute specifies the data path to be used by Virtual Circuits on this interface. If the connection has a DirectCall component then the value can be ove… |
| 1.3.6.1.4.1.562.2.4.1.70.3 | NodefrNniFramer | |||
| 1.3.6.1.4.1.562.2.4.1.70.3.1 | TablefrNniFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniFramer components. |
| 1.3.6.1.4.1.562.2.4.1.70.3.1.1 | RowfrNniFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniFramer component. |
| 1.3.6.1.4.1.562.2.4.1.70.3.1.1.1 | ColumnfrNniFramerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNniFramer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.3.1.1.2 | ColumnfrNniFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.3.1.1.4 | ColumnfrNniFramerStorageType | read-only | mandatory | This variable represents the storage type value for the frNniFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.70.3.1.1.10 | ColumnfrNniFramerIndex | not-accessible | mandatory | This variable represents the index for the frNniFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.70.3.10 | TablefrNniFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.70.3.10.1 | RowfrNniFramerProvEntry | not-accessible | mandatory | An entry in the frNniFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.70.3.10.1.1 | ColumnfrNniFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.70.3.11 | TablefrNniFramerLinkTable | not-accessible | mandatory | This group contains attributes defining the framing of data on the link interface. |
| 1.3.6.1.4.1.562.2.4.1.70.3.11.1 | RowfrNniFramerLinkEntry | not-accessible | mandatory | An entry in the frNniFramerLinkTable. |
| 1.3.6.1.4.1.562.2.4.1.70.3.11.1.4 | ColumnfrNniFramerFlagsBetweenFrames | read-write | mandatory | This attribute defines the number of flags that are inserted between frames sent to the link interface. |
| 1.3.6.1.4.1.562.2.4.1.70.3.12 | TablefrNniFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.70.3.12.1 | RowfrNniFramerStateEntry | not-accessible | mandatory | An entry in the frNniFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.70.3.12.1.1 | ColumnfrNniFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.70.3.12.1.2 | ColumnfrNniFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.70.3.12.1.3 | ColumnfrNniFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.70.3.13 | TablefrNniFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1 | RowfrNniFramerStatsEntry | not-accessible | mandatory | An entry in the frNniFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.1 | ColumnfrNniFramerFrmToIf | read-only | mandatory | The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, … |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.2 | ColumnfrNniFramerFrmFromIf | read-only | mandatory | The number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.3 | ColumnfrNniFramerOctetFromIf | read-only | mandatory | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.4 | ColumnfrNniFramerAborts | read-only | mandatory | This attribute is the total number of aborts received. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.5 | ColumnfrNniFramerCrcErrors | read-only | mandatory | This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.6 | ColumnfrNniFramerLrcErrors | read-only | mandatory | This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.7 | ColumnfrNniFramerNonOctetErrors | read-only | mandatory | This attribute is the total number of frames that were non octet aligned. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.8 | ColumnfrNniFramerOverruns | read-only | mandatory | This attribute is the total number of frames received from the link for which overruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.9 | ColumnfrNniFramerUnderruns | read-only | mandatory | This attribute is the total number of frames transmitted to the link for which underruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.10 | ColumnfrNniFramerLargeFrmErrors | read-only | mandatory | This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contain… |
| 1.3.6.1.4.1.562.2.4.1.70.3.13.1.11 | ColumnfrNniFramerFrmModeErrors | read-only | mandatory | This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified f… |
| 1.3.6.1.4.1.562.2.4.1.70.3.14 | TablefrNniFramerUtilTable | not-accessible | mandatory | This group contains the link utilizaiton operational data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.70.3.14.1 | RowfrNniFramerUtilEntry | not-accessible | mandatory | An entry in the frNniFramerUtilTable. |
| 1.3.6.1.4.1.562.2.4.1.70.3.14.1.1 | ColumnfrNniFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwi… |
| 1.3.6.1.4.1.562.2.4.1.70.3.14.1.3 | ColumnfrNniFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available … |
| 1.3.6.1.4.1.562.2.4.1.70.4 | NodefrNniLmi | |||
| 1.3.6.1.4.1.562.2.4.1.70.4.1 | TablefrNniLmiRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniLmi components. |
| 1.3.6.1.4.1.562.2.4.1.70.4.1.1 | RowfrNniLmiRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniLmi component. |
| 1.3.6.1.4.1.562.2.4.1.70.4.1.1.1 | ColumnfrNniLmiRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frNniLmi components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.4.1.1.2 | ColumnfrNniLmiComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.4.1.1.4 | ColumnfrNniLmiStorageType | read-only | mandatory | This variable represents the storage type value for the frNniLmi tables. |
| 1.3.6.1.4.1.562.2.4.1.70.4.1.1.10 | ColumnfrNniLmiIndex | not-accessible | mandatory | This variable represents the index for the frNniLmi tables. |
| 1.3.6.1.4.1.562.2.4.1.70.4.10 | TablefrNniLmiParmsTable | not-accessible | mandatory | This group contains the provisionable attributes of the Local Management Interface component. |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1 | RowfrNniLmiParmsEntry | not-accessible | mandatory | An entry in the frNniLmiParmsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.1 | ColumnfrNniLmiProcedures | read-write | mandatory | This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none: Local Management Interfa… |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.2 | ColumnfrNniLmiAsyncStatusReport | read-write | mandatory | This attribute selects the use of asynchronous PVC status report procedures as specified in ANSI and CCITT specification. |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.3 | ColumnfrNniLmiErrorEventThreshold | read-write | mandatory | For the network-side-procedure, an event is defined as follows: (1) receipt of a STATUS ENQUIRY message, or (2) expiration of timer T392. An error event is (1)… |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.4 | ColumnfrNniLmiEventCount | read-write | mandatory | This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. It must be greater than or equ… |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.5 | ColumnfrNniLmiCheckPointTimer | read-write | mandatory | This attribute selects the time (in seconds) within which a STATUS ENQUIRY message is expected. It must be greater than linkVerificationTimer (t391). |
| 1.3.6.1.4.1.562.2.4.1.70.4.10.1.7 | ColumnfrNniLmiIgnoreActiveBit | read-write | mandatory | This attribute specifies whether the Frame Relay LMI Active Bit (A-bit) has a bearing on the transfer of user data across this Frame Relay interface for both d… |
| 1.3.6.1.4.1.562.2.4.1.70.4.11 | TablefrNniLmiNniParmsTable | not-accessible | mandatory | This group contains the provisionable attributes of the Local Management Interface component which are unique to NNI. |
| 1.3.6.1.4.1.562.2.4.1.70.4.11.1 | RowfrNniLmiNniParmsEntry | not-accessible | mandatory | An entry in the frNniLmiNniParmsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.4.11.1.1 | ColumnfrNniLmiFullStatusPollingCycles | read-write | mandatory | This attribute specifies how frequently the Frame Relay NNI service should initiate a Status Enquiry for a full PVC status report. A polling cycle is a Status … |
| 1.3.6.1.4.1.562.2.4.1.70.4.11.1.2 | ColumnfrNniLmiLinkVerificationTimer | read-write | mandatory | This attribute specifies how frequently the Frame Relay NNI service should initiate a Status Enquiry for link integrity verification. It must be less than chec… |
| 1.3.6.1.4.1.562.2.4.1.70.4.12 | TablefrNniLmiStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.70.4.12.1 | RowfrNniLmiStateEntry | not-accessible | mandatory | An entry in the frNniLmiStateTable. |
| 1.3.6.1.4.1.562.2.4.1.70.4.12.1.1 | ColumnfrNniLmiAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.70.4.12.1.2 | ColumnfrNniLmiOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.70.4.12.1.3 | ColumnfrNniLmiUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.70.4.13 | TablefrNniLmiPsiTable | not-accessible | mandatory | This group provides the protocol status of the Local Management Interface. |
| 1.3.6.1.4.1.562.2.4.1.70.4.13.1 | RowfrNniLmiPsiEntry | not-accessible | mandatory | An entry in the frNniLmiPsiTable. |
| 1.3.6.1.4.1.562.2.4.1.70.4.13.1.1 | ColumnfrNniLmiProtocolStatus | read-only | mandatory | This attribute indicates whether the LMI is in an error condition or whether the LMI procedures are behaving normally. When operating with no LMI protocol, thi… |
| 1.3.6.1.4.1.562.2.4.1.70.4.13.1.2 | ColumnfrNniLmiOpProcedures | read-only | mandatory | This attribute indicates the procedures being used for the Local Management Interface. This attribute should be ignored if protocolStatus is not normalConditio… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14 | TablefrNniLmiStatsTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay NNI Local Management Interface. |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1 | RowfrNniLmiStatsEntry | not-accessible | mandatory | An entry in the frNniLmiStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.1 | ColumnfrNniLmiKeepAliveStatusToIf | read-only | mandatory | This attribute counts the number of Local Management Interface keep alive status messages sent to the external network in response to a status enquiry for keep… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.2 | ColumnfrNniLmiFullStatusToIf | read-only | mandatory | This attribute counts the number of Local Management Interface full status messages sent to the external network in response to a status enquiry for keep alive… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.3 | ColumnfrNniLmiKeepAliveStatusEnqFromIf | read-only | mandatory | This attribute counts the number of Local Management Interface valid keep alive status enquiry messages received from the external network. When the maximum co… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.4 | ColumnfrNniLmiFullStatusEnqFromIf | read-only | mandatory | This attribute counts the number of Local Management Interface valid full status enquiry messages received from the external network. When the maximum count is… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.5 | ColumnfrNniLmiNetworkSideEventHistory | read-only | mandatory | This attribute displays the Local Management Interface network side procedure event history in order of occurrence. An event is represented by a single symbol.… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.6 | ColumnfrNniLmiUserSideEventHistory | read-only | mandatory | This attribute displays the Local Management Interface user side procedure event history in order of occurrence. An event is represented by a single symbol. A … |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.7 | ColumnfrNniLmiProtocolErrors | read-only | mandatory | This attribute counts the number of Local Management Interface protocol errors. It is the sum of the sequence (sequenceErrors and statusSequenceErrors) and tim… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.8 | ColumnfrNniLmiUnexpectedIes | read-only | mandatory | This attribute counts the number of Local Management Interface frames received with an Information Element identifier that is unknown or unexpected. An unexpec… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.9 | ColumnfrNniLmiSequenceErrors | read-only | mandatory | This attribute counts the number of Local Management Interface Status Enquiry message sequence errors. A sequence error is receipt of a Status Enquiry message … |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.10 | ColumnfrNniLmiStatusSequenceErrors | read-only | mandatory | This attribute counts the number of Local Management Interface Status message sequence errors. A sequence error is receipt of a Status message with a receive s… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.11 | ColumnfrNniLmiUnexpectedReports | read-only | mandatory | This attribute counts the number of Local Management Interface frames received with an unknown or unexpected report type. An unexpected report type is not a pr… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.12 | ColumnfrNniLmiPollingVerifTimeouts | read-only | mandatory | This attribute counts the number of checkPointTImer (t392) timer expiries occurring on the Local Management Interface. When the maximum count is exceeded the c… |
| 1.3.6.1.4.1.562.2.4.1.70.4.14.1.13 | ColumnfrNniLmiNoStatusReportCount | read-only | mandatory | This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented in t… |
| 1.3.6.1.4.1.562.2.4.1.70.5 | NodefrNniDlci | |||
| 1.3.6.1.4.1.562.2.4.1.70.5.1 | TablefrNniDlciRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDlci components. |
| 1.3.6.1.4.1.562.2.4.1.70.5.1.1 | RowfrNniDlciRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDlci component. |
| 1.3.6.1.4.1.562.2.4.1.70.5.1.1.1 | ColumnfrNniDlciRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNniDlci components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.5.1.1.2 | ColumnfrNniDlciComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.5.1.1.4 | ColumnfrNniDlciStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDlci tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.1.1.10 | ColumnfrNniDlciIndex | not-accessible | mandatory | This variable represents the index for the frNniDlci tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2 | NodefrNniDlciDc | |||
| 1.3.6.1.4.1.562.2.4.1.70.5.2.1 | TablefrNniDlciDcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDlciDc components. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.1.1 | RowfrNniDlciDcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDlciDc component. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.1.1.1 | ColumnfrNniDlciDcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frNniDlciDc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.1.1.2 | ColumnfrNniDlciDcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.1.1.4 | ColumnfrNniDlciDcStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDlciDc tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.1.1.10 | ColumnfrNniDlciDcIndex | not-accessible | mandatory | This variable represents the index for the frNniDlciDc tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10 | TablefrNniDlciDcOptionsTable | not-accessible | mandatory | Options group defines attributes associated with direct call. It defines complete connection in terms of path and call options. This connection can be permanen… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1 | RowfrNniDlciDcOptionsEntry | not-accessible | mandatory | An entry in the frNniDlciDcOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.3 | ColumnfrNniDlciDcRemoteNpi | read-write | mandatory | Destination Numbering Plan Indicator (Npi) indicates the numbering plan used in the remoteDna. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.4 | ColumnfrNniDlciDcRemoteDna | read-write | mandatory | This attribute specifies the Data Network Address (DNA) of the remote. This is the called (destination) DTE address (DNA) to which this direct call will be sen… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.5 | ColumnfrNniDlciDcRemoteDlci | read-write | mandatory | L(LCN) of the destination. This attribute provides the remote LCN (Logical Channel Number) - it is used only for PVCs, where the parameter Type is set to a val… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.6 | ColumnfrNniDlciDcType | read-write | mandatory | This attribute specifies the type of Vc call: permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSlave. If the value is set to permanent… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.9 | ColumnfrNniDlciDcTransferPriority | read-write | mandatory | This attribute specifies the transfer priority to network for the outgoing calls using this particular DLCI. It overRides the defaultTransferPriority provision… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.10 | ColumnfrNniDlciDcDiscardPriority | read-write | mandatory | This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning values: normal, high, and useDnaDe… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.11 | ColumnfrNniDlciDcDeDiscardPriority | read-write | mandatory | This attribute specifies whether the discardPriority applies to DE frames for this DLCI. If deDiscardPriority is set to determinedByDiscardPriority, traffic wi… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.12 | ColumnfrNniDlciDcDataPath | read-write | mandatory | This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.13 | ColumnfrNniDlciDcCugIndex | read-write | mandatory | This attribute specifies the CUG index which is to be signalled in PVC call requests to the remote end. The type of CUG signalling is defined in attribute cugT… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.10.1.14 | ColumnfrNniDlciDcCugType | read-write | mandatory | This attribute specifies the type of CUG signalling to be used in PVC call request. Index of CUG to be used is defined in attribute cugIndex in this component.… |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.202 | TablefrNniDlciDcNfaTable | not-accessible | obsolete | This is the i'th National facility required for this direct call. Within the provisioning system, the user specifies the facility code along with the facility … |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.202.1 | RowfrNniDlciDcNfaEntry | not-accessible | obsolete | An entry in the frNniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.202.1.1 | ColumnfrNniDlciDcNfaIndex | not-accessible | obsolete | This variable represents the index for the frNniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.202.1.2 | ColumnfrNniDlciDcNfaValue | read-write | obsolete | This variable represents an individual value for the frNniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.2.202.1.3 | ColumnfrNniDlciDcNfaRowStatus | write-only | obsolete | This variable is used to control the addition and deletion of individual values of the frNniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3 | NodefrNniDlciVc | |||
| 1.3.6.1.4.1.562.2.4.1.70.5.3.1 | TablefrNniDlciVcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDlciVc components. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.1.1 | RowfrNniDlciVcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDlciVc component. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.1.1.1 | ColumnfrNniDlciVcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frNniDlciVc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.1.1.2 | ColumnfrNniDlciVcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.1.1.4 | ColumnfrNniDlciVcStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDlciVc tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.1.1.10 | ColumnfrNniDlciVcIndex | not-accessible | mandatory | This variable represents the index for the frNniDlciVc tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10 | TablefrNniDlciVcCadTable | not-accessible | mandatory | This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1 | RowfrNniDlciVcCadEntry | not-accessible | mandatory | An entry in the frNniDlciVcCadTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.1 | ColumnfrNniDlciVcType | read-only | mandatory | This attribute displays the type of call, pvc,svc or spvc. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.2 | ColumnfrNniDlciVcState | read-only | mandatory | This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very sho… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.3 | ColumnfrNniDlciVcPreviousState | read-only | mandatory | This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.4 | ColumnfrNniDlciVcDiagnosticCode | read-only | mandatory | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.5 | ColumnfrNniDlciVcPreviousDiagnosticCode | read-only | mandatory | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.6 | ColumnfrNniDlciVcCalledNpi | read-only | mandatory | This attribute displays the Numbering Plan Indicator (NPI) of the called end. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.7 | ColumnfrNniDlciVcCalledDna | read-only | mandatory | This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end wil… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.8 | ColumnfrNniDlciVcCalledLcn | read-only | mandatory | This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.9 | ColumnfrNniDlciVcCallingNpi | read-only | mandatory | This attribute displays the Numbering Plan Indicator (NPI) of the calling end. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.10 | ColumnfrNniDlciVcCallingDna | read-only | mandatory | This attribute displays the Data Network Address (Dna) of the calling end. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.11 | ColumnfrNniDlciVcCallingLcn | read-only | mandatory | This attribute displays the Logical Channel Number of the calling end. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.12 | ColumnfrNniDlciVcAccountingEnabled | read-only | mandatory | This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of … |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.13 | ColumnfrNniDlciVcFastSelectCall | read-only | mandatory | This attribute displays that this is a fast select call. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.19 | ColumnfrNniDlciVcPathReliability | read-only | mandatory | This attribute displays the path reliability. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.20 | ColumnfrNniDlciVcAccountingEnd | read-only | mandatory | This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.21 | ColumnfrNniDlciVcPriority | read-only | mandatory | This attribute displays whether the call is a normal or a high priority call. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.22 | ColumnfrNniDlciVcSegmentSize | read-only | mandatory | This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.27 | ColumnfrNniDlciVcMaxSubnetPktSize | read-only | mandatory | This attribute indicates the maximum packet size allowed on the Vc. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.28 | ColumnfrNniDlciVcRcosToNetwork | read-only | mandatory | This attribute indicates the routing metric routing class of service to the network. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.29 | ColumnfrNniDlciVcRcosFromNetwork | read-only | mandatory | This attribute displays the routing metric Routing Class of Service from the Network. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.30 | ColumnfrNniDlciVcEmissionPriorityToNetwork | read-only | mandatory | This attribute displays the network internal emission priotity to the network. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.31 | ColumnfrNniDlciVcEmissionPriorityFromNetwork | read-only | mandatory | This attribute displays the network internal emission priotity from the network. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.10.1.32 | ColumnfrNniDlciVcDataPath | read-only | mandatory | This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attri… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.11 | TablefrNniDlciVcIntdTable | not-accessible | mandatory | This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.11.1 | RowfrNniDlciVcIntdEntry | not-accessible | mandatory | An entry in the frNniDlciVcIntdTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.11.1.1 | ColumnfrNniDlciVcCallReferenceNumber | read-only | mandatory | This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval dat… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.11.1.2 | ColumnfrNniDlciVcElapsedTimeTillNow | read-only | mandatory | This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.11.1.3 | ColumnfrNniDlciVcSegmentsRx | read-only | mandatory | This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.11.1.4 | ColumnfrNniDlciVcSegmentsSent | read-only | mandatory | This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. V… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.11.1.5 | ColumnfrNniDlciVcStartTime | read-only | mandatory | This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 ho… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12 | TablefrNniDlciVcFrdTable | not-accessible | mandatory | This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand t… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1 | RowfrNniDlciVcFrdEntry | not-accessible | mandatory | An entry in the frNniDlciVcFrdTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.2 | ColumnfrNniDlciVcFrmCongestedToSubnet | read-only | mandatory | This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be dis… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.3 | ColumnfrNniDlciVcCannotForwardToSubnet | read-only | mandatory | This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link disc… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.4 | ColumnfrNniDlciVcNotDataXferToSubnet | read-only | mandatory | This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.5 | ColumnfrNniDlciVcOutOfRangeFrmFromSubnet | read-only | mandatory | This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.6 | ColumnfrNniDlciVcCombErrorsFromSubnet | read-only | mandatory | This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs wh… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.7 | ColumnfrNniDlciVcDuplicatesFromSubnet | read-only | mandatory | This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.8 | ColumnfrNniDlciVcNotDataXferFromSubnet | read-only | mandatory | This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.9 | ColumnfrNniDlciVcFrmLossTimeouts | read-only | mandatory | This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.10 | ColumnfrNniDlciVcOoSeqByteCntExceeded | read-only | mandatory | This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if t… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.11 | ColumnfrNniDlciVcPeakOoSeqPktCount | read-only | mandatory | This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.12 | ColumnfrNniDlciVcPeakOoSeqFrmForwarded | read-only | mandatory | This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.13 | ColumnfrNniDlciVcSendSequenceNumber | read-only | mandatory | This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.15 | ColumnfrNniDlciVcPktRetryTimeouts | read-only | mandatory | This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.16 | ColumnfrNniDlciVcPeakRetryQueueSize | read-only | mandatory | This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.17 | ColumnfrNniDlciVcSubnetRecoveries | read-only | mandatory | This attribute displays the number of successful Vc recovery attempts. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.19 | ColumnfrNniDlciVcOoSeqPktCntExceeded | read-only | mandatory | This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.12.1.20 | ColumnfrNniDlciVcPeakOoSeqByteCount | read-only | mandatory | This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced q… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.417 | TablefrNniDlciVcDmepTable | not-accessible | mandatory | This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly da… |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.417.1 | RowfrNniDlciVcDmepEntry | not-accessible | mandatory | An entry in the frNniDlciVcDmepTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.3.417.1.1 | ColumnfrNniDlciVcDmepValue | read-only | mandatory | This variable represents both the value and the index for the frNniDlciVcDmepTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.4 | NodefrNniDlciSp | |||
| 1.3.6.1.4.1.562.2.4.1.70.5.4.1 | TablefrNniDlciSpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDlciSp components. |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.1.1 | RowfrNniDlciSpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDlciSp component. |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.1.1.1 | ColumnfrNniDlciSpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frNniDlciSp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.1.1.2 | ColumnfrNniDlciSpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.1.1.4 | ColumnfrNniDlciSpStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDlciSp tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.1.1.10 | ColumnfrNniDlciSpIndex | not-accessible | mandatory | This variable represents the index for the frNniDlciSp tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11 | TablefrNniDlciSpParmsTable | not-accessible | mandatory | This group contains the provisionable attributes for the Data Link Connection Identifier. These attributes reflect the service parameters specific to this inst… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1 | RowfrNniDlciSpParmsEntry | not-accessible | mandatory | An entry in the frNniDlciSpParmsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.1 | ColumnfrNniDlciSpMaximumFrameSize | read-write | mandatory | This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.2 | ColumnfrNniDlciSpRateEnforcement | read-write | mandatory | This attribute specifies whether rate enforcement is in effect for this user Data Link Connection on this Frame Relay interface. Turning on rate enforcement me… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.3 | ColumnfrNniDlciSpCommittedInformationRate | read-write | mandatory | This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the netwo… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.4 | ColumnfrNniDlciSpCommittedBurstSize | read-write | mandatory | This attribute specifies the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measu… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.5 | ColumnfrNniDlciSpExcessBurstSize | read-write | mandatory | This attribute specifies the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement int… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.6 | ColumnfrNniDlciSpMeasurementInterval | read-write | mandatory | When cir and bc are zero and rateEnforcement is on, this attribute must be provisioned to specify the time interval (in milliseconds) over which rates and burs… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.7 | ColumnfrNniDlciSpRateAdaptation | read-write | mandatory | This attribute specifies whether rate adaptation is in effect for this user Data Link Connection on this Frame Relay interface. Rate adaptation is a feature th… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.8 | ColumnfrNniDlciSpAccounting | read-write | mandatory | This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generati… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.9 | ColumnfrNniDlciSpRaSensitivity | read-write | mandatory | This attribute specifies the sensitivity of the rate adaptation system. A higher number indicates a higher sensitivity and therefore a quicker reaction time to… |
| 1.3.6.1.4.1.562.2.4.1.70.5.4.11.1.10 | ColumnfrNniDlciSpUpdateBCI | read-write | mandatory | This attribute specifies whether internal Backward Congestion Indication (BCI) bits will report congestion external to the Passport network, as communicated th… |
| 1.3.6.1.4.1.562.2.4.1.70.5.5 | NodefrNniDlciLb | |||
| 1.3.6.1.4.1.562.2.4.1.70.5.5.1 | TablefrNniDlciLbRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniDlciLb components. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.1.1 | RowfrNniDlciLbRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniDlciLb component. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.1.1.1 | ColumnfrNniDlciLbRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frNniDlciLb components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.1.1.2 | ColumnfrNniDlciLbComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.1.1.4 | ColumnfrNniDlciLbStorageType | read-only | mandatory | This variable represents the storage type value for the frNniDlciLb tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.1.1.10 | ColumnfrNniDlciLbIndex | not-accessible | mandatory | This variable represents the index for the frNniDlciLb tables. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10 | TablefrNniDlciLbStatsTable | not-accessible | mandatory | This group contains all the statistics for the data loopback tool. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1 | RowfrNniDlciLbStatsEntry | not-accessible | mandatory | An entry in the frNniDlciLbStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.1 | ColumnfrNniDlciLbLocalTotalFrm | read-only | mandatory | This attribute records the number of frames looped back to the link since loopback was last started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.2 | ColumnfrNniDlciLbLocalTotalBytes | read-only | mandatory | This attribute records the number of bytes looped back to the link since loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.3 | ColumnfrNniDlciLbLocalFecnFrm | read-only | mandatory | This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the link since the loopback mode w… |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.4 | ColumnfrNniDlciLbLocalBecnFrm | read-only | mandatory | This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the link since the loopback mode … |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.5 | ColumnfrNniDlciLbLocalDeFrm | read-only | mandatory | This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.6 | ColumnfrNniDlciLbLocalDeBytes | read-only | mandatory | This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.7 | ColumnfrNniDlciLbRemoteTotalFrm | read-only | mandatory | This attribute records the number of frames looped back to the subnet since loopback was last started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.8 | ColumnfrNniDlciLbRemoteTotalBytes | read-only | mandatory | This attribute records the number of bytes looped back to the subnet since loopback was last started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.9 | ColumnfrNniDlciLbRemoteFecnFrm | read-only | mandatory | This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the subnet since the loopback mode… |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.10 | ColumnfrNniDlciLbRemoteBecnFrm | read-only | mandatory | This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the subnet since the loopback mod… |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.13 | ColumnfrNniDlciLbRemoteDeFrm | read-only | mandatory | This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.5.10.1.14 | ColumnfrNniDlciLbRemoteDeBytes | read-only | mandatory | This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.70.5.10 | TablefrNniDlciStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1 | RowfrNniDlciStateEntry | not-accessible | mandatory | An entry in the frNniDlciStateTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.1 | ColumnfrNniDlciAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.2 | ColumnfrNniDlciOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.3 | ColumnfrNniDlciUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.4 | ColumnfrNniDlciAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.5 | ColumnfrNniDlciProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.6 | ColumnfrNniDlciControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.7 | ColumnfrNniDlciAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.8 | ColumnfrNniDlciStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.70.5.10.1.9 | ColumnfrNniDlciUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.70.5.12 | TablefrNniDlciAbitTable | not-accessible | mandatory | This group contains the A-Bit status information for this Data Link Connection Identifier. |
| 1.3.6.1.4.1.562.2.4.1.70.5.12.1 | RowfrNniDlciAbitEntry | not-accessible | mandatory | An entry in the frNniDlciAbitTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.12.1.1 | ColumnfrNniDlciABitStatusToIf | read-only | mandatory | This attribute is the most recent A-bit status sent to the interface. The A-bit status is part of the LMI protocol, and indicates willingness to accept data fr… |
| 1.3.6.1.4.1.562.2.4.1.70.5.12.1.2 | ColumnfrNniDlciABitReasonToIf | read-only | mandatory | This attribute provides the reason (if any) for an inactive status to be sent to the interface. This reason is not applicable for an active status. |
| 1.3.6.1.4.1.562.2.4.1.70.5.12.1.3 | ColumnfrNniDlciABitStatusFromIf | read-only | mandatory | This attribute is the most recent A-Bit status received from the interface. |
| 1.3.6.1.4.1.562.2.4.1.70.5.12.1.4 | ColumnfrNniDlciABitReasonFromIf | read-only | mandatory | This attribute provides the reason (if any) for an inactive status to be sent to the subnet. This reason is not applicable for an active status. |
| 1.3.6.1.4.1.562.2.4.1.70.5.12.1.5 | ColumnfrNniDlciLoopbackState | read-only | mandatory | This attribute has the value on when the DLCI is in loopback mode and off otherwise. This loopback command verbs start and stop are used to initiate and termin… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13 | TablefrNniDlciSpOpTable | not-accessible | mandatory | This group defines the service and traffic parameters specific to this instance of DLCI. For PVCs, the values of attributes with the exception of the measureme… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1 | RowfrNniDlciSpOpEntry | not-accessible | mandatory | An entry in the frNniDlciSpOpTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.1 | ColumnfrNniDlciMaximumFrameSize | read-only | mandatory | This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.2 | ColumnfrNniDlciRateEnforcement | read-only | obsolete | This attribute is obsolete. It provided the same information as the provision attribute rateEnforcement in dlci/* sp. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.3 | ColumnfrNniDlciCommittedInformationRate | read-only | mandatory | This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the netwo… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.4 | ColumnfrNniDlciCommittedBurstSize | read-only | mandatory | This attribute specifies the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measu… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.5 | ColumnfrNniDlciExcessBurstSize | read-only | mandatory | This attribute specifies the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement int… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.6 | ColumnfrNniDlciMeasurementInterval | read-only | mandatory | This attribute specifies the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute should be ignored when rateEnforceme… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.7 | ColumnfrNniDlciRateAdaptation | read-only | obsolete | This attribute is obsolete. It provided the information which is now in the provision attribute rateAdaptation in dlci/* sp. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.8 | ColumnfrNniDlciAccounting | read-only | mandatory | This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generati… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.9 | ColumnfrNniDlciEmissionPriorityToIf | read-only | mandatory | This attribute indicates the emission priority of frames sent to the interface. A larger value denotes a higher priority. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.10 | ColumnfrNniDlciTransferPriToNwk | read-only | mandatory | This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configured for an application accordin… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.11 | ColumnfrNniDlciTransferPriFromNwk | read-only | mandatory | This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference configured for an application accord… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14 | TablefrNniDlciStatsTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay Data Link Connection Identifier. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1 | RowfrNniDlciStatsEntry | not-accessible | mandatory | An entry in the frNniDlciStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.1 | ColumnfrNniDlciFrmToIf | read-only | mandatory | This attribute counts the frames sent out the interface. When the maximum count is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.2 | ColumnfrNniDlciFecnFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wrap… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.3 | ColumnfrNniDlciBecnFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wra… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.4 | ColumnfrNniDlciBciToSubnet | read-only | mandatory | This attribute counts the frames sent into the local network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to … |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.5 | ColumnfrNniDlciDeFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.6 | ColumnfrNniDlciDiscCongestedToIf | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the interface. When this count re… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.7 | ColumnfrNniDlciDiscDeCongestedToIf | read-only | mandatory | This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion in the dir… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.8 | ColumnfrNniDlciFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface. It includes the frames that are discarded due to error or excess. When the maximum count is reach… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.9 | ColumnfrNniDlciFecnFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum i… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.10 | ColumnfrNniDlciBecnFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum … |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.11 | ColumnfrNniDlciFciFromSubnet | read-only | mandatory | This attribute counts the frames received from the network with the Forward Congestion Indication (FCI) bit set. When the count reaches maximum it wraps to zer… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.12 | ColumnfrNniDlciBciFromSubnet | read-only | mandatory | This attribute counts the frames received from the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to ze… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.13 | ColumnfrNniDlciDeFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.14 | ColumnfrNniDlciExcessFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enfor… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.15 | ColumnfrNniDlciDiscExcessFromIf | read-only | mandatory | This attribute counts the frames which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.16 | ColumnfrNniDlciDiscFrameAbit | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay Service, due to an inactive PVC status, in the direction toward the local network. When t… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.17 | ColumnfrNniDlciDiscCongestedFromIf | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the network. When this count reac… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.18 | ColumnfrNniDlciDiscDeCongestedFromIf | read-only | mandatory | This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion, in the di… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.19 | ColumnfrNniDlciErrorShortFrmFromIf | read-only | mandatory | This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.20 | ColumnfrNniDlciErrorLongFrmFromIf | read-only | mandatory | This attribute counts the frames received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.21 | ColumnfrNniDlciBecnFrmSetByService | read-only | mandatory | This attribute counts the number of frames with BECN set by the Frame Relay service. It is incremented whenever the Frame Relay service sets BECN on a frame up… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.22 | ColumnfrNniDlciBytesToIf | read-only | mandatory | This attribute counts the bytes sent out the interface. When the maximum count is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.23 | ColumnfrNniDlciDeBytesToIf | read-only | mandatory | This attribute counts the bytes sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.24 | ColumnfrNniDlciDiscCongestedToIfBytes | read-only | mandatory | This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the link. When this count reaches … |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.25 | ColumnfrNniDlciDiscDeCongestedToIfBytes | read-only | mandatory | This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the link. … |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.26 | ColumnfrNniDlciBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface. Bytes that are discarded due to error or excess are not counted. When the maximum count is reached… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.27 | ColumnfrNniDlciDeBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.28 | ColumnfrNniDlciExcessBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforc… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.29 | ColumnfrNniDlciDiscExcessFromIfBytes | read-only | mandatory | This attribute counts the bytes which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.30 | ColumnfrNniDlciDiscByteAbit | read-only | mandatory | This attribute counts the bytes which were discarded due to aBit turned off. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.31 | ColumnfrNniDlciDiscCongestedFromIfBytes | read-only | mandatory | This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the network. When this count reach… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.32 | ColumnfrNniDlciDiscDeCongestedFromIfBytes | read-only | mandatory | This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the networ… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.33 | ColumnfrNniDlciErrorShortBytesFromIf | read-only | mandatory | This attribute counts the bytes received with 0 octets in the information field. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.34 | ColumnfrNniDlciErrorLongBytesFromIf | read-only | mandatory | This attribute counts the bytes received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it … |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.35 | ColumnfrNniDlciRateAdaptReduct | read-only | mandatory | This attribute counts the number of rate reductions due to rate adaptation. Rate adaptation causes the allowed rate to be reduced in steps. After each reductio… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.36 | ColumnfrNniDlciRateAdaptReductPeriod | read-only | mandatory | This attribute provides a cumulative count of the amount of time that rate adaptation procedures have been in effect. When this count reaches maximum, it wraps… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.37 | ColumnfrNniDlciTransferPriorityToNetwork | read-only | obsolete | This attribute is obsolete. It is replaced by attribute transferPriorityToNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.38 | ColumnfrNniDlciTransferPriorityFromNetwork | read-only | obsolete | This attribute is obsolete. It is replaced by attribute transferPriorityFromNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp. |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.39 | ColumnfrNniDlciCirPresent | read-only | mandatory | This attribute provides the actual Committed Information Rate (CIR) enforced for this DLCI. This number is in units of 800 bits/ sec, since that is the interna… |
| 1.3.6.1.4.1.562.2.4.1.70.5.14.1.40 | ColumnfrNniDlciEirPresent | read-only | mandatory | This attribute provides the actual Excess Information Rate (EIR) enforced for this DLCI. This number is in units of 800 bits/sec, since that is the internal re… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15 | TablefrNniDlciIntTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay Data Link Connection Identifier interval data (accounting data). |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1 | RowfrNniDlciIntEntry | not-accessible | mandatory | An entry in the frNniDlciIntTable. |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.1 | ColumnfrNniDlciStartTime | read-only | mandatory | This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 ho… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.2 | ColumnfrNniDlciTotalIngressBytes | read-only | mandatory | This attribute counts the total bytes received from the interface since the start of the interval period. The start of the interval period is captured in the s… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.3 | ColumnfrNniDlciTotalEgressBytes | read-only | mandatory | This attribute counts the total bytes sent to the interface since the start of the interval period. The start of the interval period is captured in the startTi… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.4 | ColumnfrNniDlciEirIngressBytes | read-only | mandatory | This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the int… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.5 | ColumnfrNniDlciEirEgressBytes | read-only | mandatory | This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the … |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.6 | ColumnfrNniDlciDiscardedBytes | read-only | mandatory | This attribute counts the total bytes in invalid frames received from the interface and discarded at the DLCI since the start of the interval period. This coun… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.7 | ColumnfrNniDlciTotalIngressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames received from the … |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.8 | ColumnfrNniDlciTotalEgressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames sent to the interf… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.9 | ColumnfrNniDlciEirIngressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibi… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.10 | ColumnfrNniDlciEirEgressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibi… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.11 | ColumnfrNniDlciDiscardedSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in invalid frames received from th… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.12 | ColumnfrNniDlciCirPresentObs | read-only | obsolete | This attribute has moved to the statistics subgroup. See cirPresent.. |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.13 | ColumnfrNniDlciEirPresentObs | read-only | obsolete | This attribute has moved to the statistics subgroup. See eirPresent. |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.14 | ColumnfrNniDlciRateEnforcementPresent | read-only | obsolete | This attribute is obsolete. It is the same as the provisioned rateEnforcement attributed.. |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.15 | ColumnfrNniDlciRateAdaptationPresent | read-only | obsolete | This attribute is obsolete. See the provisioning attribute rateAdaptation for the data that it intended to provide. |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.16 | ColumnfrNniDlciLocalRateAdaptOccurred | read-only | mandatory | This attribute specifies whether rate adaptation has occurred on this user Data Link Connection on this Frame Relay interface.The count is reset to no when an … |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.17 | ColumnfrNniDlciCallReferenceNumber | read-only | mandatory | This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval dat… |
| 1.3.6.1.4.1.562.2.4.1.70.5.15.1.18 | ColumnfrNniDlciElapsedDifference | read-only | mandatory | This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since the call started. |
| 1.3.6.1.4.1.562.2.4.1.70.6 | NodefrNniVFramer | |||
| 1.3.6.1.4.1.562.2.4.1.70.6.1 | TablefrNniVFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniVFramer components. |
| 1.3.6.1.4.1.562.2.4.1.70.6.1.1 | RowfrNniVFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniVFramer component. |
| 1.3.6.1.4.1.562.2.4.1.70.6.1.1.1 | ColumnfrNniVFramerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNniVFramer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.6.1.1.2 | ColumnfrNniVFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.6.1.1.4 | ColumnfrNniVFramerStorageType | read-only | mandatory | This variable represents the storage type value for the frNniVFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.70.6.1.1.10 | ColumnfrNniVFramerIndex | not-accessible | mandatory | This variable represents the index for the frNniVFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.70.6.10 | TablefrNniVFramerProvTable | not-accessible | mandatory | This group contains provisionable attributes for the VirtualFramer component. |
| 1.3.6.1.4.1.562.2.4.1.70.6.10.1 | RowfrNniVFramerProvEntry | not-accessible | mandatory | An entry in the frNniVFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.70.6.10.1.1 | ColumnfrNniVFramerOtherVirtualFramer | read-write | mandatory | This attribute specifies the other VirtualFramer to which the service is linked, for example, FrUni/n VirtualFramer, FrDte/n VirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.70.6.10.1.2 | ColumnfrNniVFramerLogicalProcessor | read-write | mandatory | This attribute specifies the logical processor on which the service component will reside. |
| 1.3.6.1.4.1.562.2.4.1.70.6.11 | TablefrNniVFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.70.6.11.1 | RowfrNniVFramerStateEntry | not-accessible | mandatory | An entry in the frNniVFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.70.6.11.1.1 | ColumnfrNniVFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.70.6.11.1.2 | ColumnfrNniVFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.70.6.11.1.3 | ColumnfrNniVFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.70.6.12 | TablefrNniVFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a VirtualFramer component. |
| 1.3.6.1.4.1.562.2.4.1.70.6.12.1 | RowfrNniVFramerStatsEntry | not-accessible | mandatory | An entry in the frNniVFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.6.12.1.2 | ColumnfrNniVFramerFrmToOtherVFramer | read-only | mandatory | This attribute counts the frames transmitted to the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.70.6.12.1.3 | ColumnfrNniVFramerFrmFromOtherVFramer | read-only | mandatory | This attribute counts the frames received from the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.70.6.12.1.5 | ColumnfrNniVFramerOctetFromOtherVFramer | read-only | mandatory | This attribute counts the octets received from the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.70.9 | NodefrNniLts | |||
| 1.3.6.1.4.1.562.2.4.1.70.9.1 | TablefrNniLtsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniLts components. |
| 1.3.6.1.4.1.562.2.4.1.70.9.1.1 | RowfrNniLtsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniLts component. |
| 1.3.6.1.4.1.562.2.4.1.70.9.1.1.1 | ColumnfrNniLtsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNniLts components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.9.1.1.2 | ColumnfrNniLtsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.9.1.1.4 | ColumnfrNniLtsStorageType | read-only | mandatory | This variable represents the storage type value for the frNniLts tables. |
| 1.3.6.1.4.1.562.2.4.1.70.9.1.1.10 | ColumnfrNniLtsIndex | not-accessible | mandatory | This variable represents the index for the frNniLts tables. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2 | NodefrNniLtsPat | |||
| 1.3.6.1.4.1.562.2.4.1.70.9.2.1 | TablefrNniLtsPatRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frNniLtsPat components. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.1.1 | RowfrNniLtsPatRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frNniLtsPat component. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.1.1.1 | ColumnfrNniLtsPatRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frNniLtsPat components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.1.1.2 | ColumnfrNniLtsPatComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.1.1.4 | ColumnfrNniLtsPatStorageType | read-only | mandatory | This variable represents the storage type value for the frNniLtsPat tables. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.1.1.10 | ColumnfrNniLtsPatIndex | not-accessible | mandatory | This variable represents the index for the frNniLtsPat tables. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10 | TablefrNniLtsPatDefaultsTable | not-accessible | mandatory | This attribute group contains the specifications of the pattern. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1 | RowfrNniLtsPatDefaultsEntry | not-accessible | mandatory | An entry in the frNniLtsPatDefaultsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.200 | ColumnfrNniLtsPatDefaultDlci | read-write | mandatory | This attribute specifies for which dlci (on the local end) the frames are destined. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.201 | ColumnfrNniLtsPatDefaultNumFrames | read-write | mandatory | This attribute specifies the number of frames in this pattern. This is the number of frames of this type which will be generated in one timeInterval. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.202 | ColumnfrNniLtsPatDefaultDataSize | read-write | mandatory | This attribute specifies the payload size of each frame in bytes. This is in excess to the header. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.203 | ColumnfrNniLtsPatDefaultHeaderBits | read-write | mandatory | This attribute specifies whether the following bits are on/off in the header of each frame. The following bits can be set: BeCn, C/R, De, FeCn Description of b… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.204 | ColumnfrNniLtsPatDefaultHeaderLength | read-write | mandatory | This attribute specifies the size of the frame relay header in bytes. Passport currently only supports a 2-byte header. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.205 | ColumnfrNniLtsPatDefaultEABits | read-write | mandatory | This attribute specifies how the address field extension bits are set in the frame header. Consider the value to be a four bit binary number. For example, 4 = … |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.206 | ColumnfrNniLtsPatDefaultPayloadPattern | read-write | mandatory | This attribute specifies the payload of each frame. The value specified is in hexadecimal, where every two digits represent a byte. A maximum of 24 digits (12 … |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.207 | ColumnfrNniLtsPatDefaultRfc1490Header | read-write | mandatory | This attribute specifies the appropriate RFC 1490 encapsulated header of the frame. A value of 0 indicates no 1490 header. NOTE: This header resides in the fir… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.10.1.208 | ColumnfrNniLtsPatDefaultUseBadLrc | read-write | mandatory | This attribute specifies whether the frames from this pattern are to have a bad LRC prior to being sent to the framer. The LRC is checked while the frame is be… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11 | TablefrNniLtsPatSetupTable | not-accessible | mandatory | This attribute group contains the specifications of the pattern. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1 | RowfrNniLtsPatSetupEntry | not-accessible | mandatory | An entry in the frNniLtsPatSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.200 | ColumnfrNniLtsPatDlci | read-write | mandatory | This attribute specifies for which dlci (on the local end) the frames are destined. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.201 | ColumnfrNniLtsPatNumFrames | read-write | mandatory | This attribute specifies the number of frames in this pattern. This is the number of frames of this type which will be generated in one timeInterval. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.202 | ColumnfrNniLtsPatDataSize | read-write | mandatory | This attribute specifies the payload size of each frame in bytes. This is in excess to the header. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.203 | ColumnfrNniLtsPatHeaderBits | read-write | mandatory | This attribute specifies whether the following bits are on/off in the header of each frame. The following bits can be set: BeCn, C/R, De, FeCn Description of b… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.204 | ColumnfrNniLtsPatHeaderLength | read-write | mandatory | This attribute specifies the size of the frame relay header in bytes. Passport currently only supports a 2-byte header. Valid values are 0, 2, 3, 4. 0 indicate… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.205 | ColumnfrNniLtsPatEaBits | read-write | mandatory | This attribute specifies how the address field extension bits are set in the frame header. Consider the value to be a four bit binary number. For example, 4 = … |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.206 | ColumnfrNniLtsPatPayloadPattern | read-write | mandatory | This attribute specifies the payload of each frame. The value specified is in hexadecimal, where every two digits represent a byte. A maximum of 24 digits (12 … |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.207 | ColumnfrNniLtsPatRfc1490Header | read-write | mandatory | This attribute specifies the appropriate RFC 1490 encapsulated header of the frame. A value of 0 indicates no 1490 header. NOTE: This header resides in the fir… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.11.1.208 | ColumnfrNniLtsPatUseBadLrc | read-write | mandatory | This attribute specifies whether the frames from this pattern are to have a bad LRC prior to being sent to the framer. The LRC is checked while the frame is be… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.12 | TablefrNniLtsPatOpDataTable | not-accessible | mandatory | This group contains the operational attributes which allow changing the pattern outside of provisioning mode. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.12.1 | RowfrNniLtsPatOpDataEntry | not-accessible | mandatory | An entry in the frNniLtsPatOpDataTable. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.12.1.200 | ColumnfrNniLtsPatFramePattern | read-only | mandatory | This attribute displays the first 20 to 24 bytes of the frame payload, depending on the frame relay header size selected. This attribute represents the frame i… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.12.1.201 | ColumnfrNniLtsPatHdlcBitsInserted | read-only | mandatory | This attribute displays how many times a zero bit will be inserted after 5 consecutive 1 bits when a frame from this pattern is sent out. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.13 | TablefrNniLtsPatOpStateTable | not-accessible | mandatory | This group contains the attributes containing the operational statistics of the pattern. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.13.1 | RowfrNniLtsPatOpStateEntry | not-accessible | mandatory | An entry in the frNniLtsPatOpStateTable. |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.13.1.200 | ColumnfrNniLtsPatLoad | read-only | mandatory | This attribute indicates the load due to this particular pattern. The loads associated with all of the provisioned patterns are summed to arrive at the FrLts l… |
| 1.3.6.1.4.1.562.2.4.1.70.9.2.13.1.201 | ColumnfrNniLtsPatStatus | read-write | mandatory | This attributes specifies the administrative state of the pattern. A disabled pattern will not be generated, although it can still be triggered. |
| 1.3.6.1.4.1.562.2.4.1.70.9.10 | TablefrNniLtsSetupTable | not-accessible | mandatory | This attribute group contains the parameters used to configure the behavior of the Frame Relay Load Test System. |
| 1.3.6.1.4.1.562.2.4.1.70.9.10.1 | RowfrNniLtsSetupEntry | not-accessible | mandatory | An entry in the frNniLtsSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.70.9.10.1.200 | ColumnfrNniLtsDuration | read-write | mandatory | This attribute specifies the duration of the test in milliseconds. The test will run until the duration expires or the STOP command is issued. A value of 0 is … |
| 1.3.6.1.4.1.562.2.4.1.70.9.10.1.201 | ColumnfrNniLtsAlgorithm | read-write | mandatory | This attribute specifies which algorithm is used to generate the frames. ContinuousBurst This mode of traffic generation creates traffic at the maximum rate po… |
| 1.3.6.1.4.1.562.2.4.1.70.9.10.1.204 | ColumnfrNniLtsBurstSize | read-write | mandatory | This attribute specifies the number of frames per burst under the delayedBurst and intervalBurst algorithms. |
| 1.3.6.1.4.1.562.2.4.1.70.9.10.1.205 | ColumnfrNniLtsTimeInterval | read-write | mandatory | This attribute specifies the time interval to the specified number of seconds. Granuality is in centiseconds. Maximum is 1 minute. |
| 1.3.6.1.4.1.562.2.4.1.70.9.11 | TablefrNniLtsStateTable | not-accessible | mandatory | This group contains the operation statistics of the load generator. |
| 1.3.6.1.4.1.562.2.4.1.70.9.11.1 | RowfrNniLtsStateEntry | not-accessible | mandatory | An entry in the frNniLtsStateTable. |
| 1.3.6.1.4.1.562.2.4.1.70.9.11.1.200 | ColumnfrNniLtsGeneratorState | read-only | mandatory | This attribute indicates whether the Lts is generating traffic. |
| 1.3.6.1.4.1.562.2.4.1.70.9.11.1.201 | ColumnfrNniLtsCycleIncomplete | read-only | mandatory | This attribute indicates whether the time required to generate all of the enabled patterns is more than timeInterval by a true value. Otherwise, this flag is s… |
| 1.3.6.1.4.1.562.2.4.1.70.9.11.1.202 | ColumnfrNniLtsLastActiveInterval | read-only | mandatory | This attribute indicates the actual time it took to generate all of the enabled patterns in the last cycle. If cycleIncomplete is true, this value should be ze… |
| 1.3.6.1.4.1.562.2.4.1.70.9.11.1.204 | ColumnfrNniLtsLoad | read-only | mandatory | This attribute indicates the load being generated. This value represents that calculated using the set number of ticks. The actual burstTimeInterval may differ… |
| 1.3.6.1.4.1.562.2.4.1.70.9.11.1.205 | ColumnfrNniLtsElapsedGenerationTime | read-only | mandatory | This attribute indicates how many milliseconds have elapsed since the start of this test. |
| 1.3.6.1.4.1.562.2.4.1.70.9.12 | TablefrNniLtsResultsTable | not-accessible | mandatory | This group contains the frame counting attributes for the LTS component. |
| 1.3.6.1.4.1.562.2.4.1.70.9.12.1 | RowfrNniLtsResultsEntry | not-accessible | mandatory | An entry in the frNniLtsResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.9.12.1.200 | ColumnfrNniLtsFramesTx | read-only | mandatory | This attribute specifies the number of frames send to the network since the last time these statistics were cleared. This is similar to the framesToIf attribut… |
| 1.3.6.1.4.1.562.2.4.1.70.9.12.1.204 | ColumnfrNniLtsBytesTx | read-only | mandatory | This attribute indicates the number of bytes sent. |
| 1.3.6.1.4.1.562.2.4.1.70.9.12.1.208 | ColumnfrNniLtsBitRateTx | read-only | mandatory | This attribute indicates the bit rate being sent to the link. It should only differ from the load if the burstTimeInterval would be >= the timeInterval or burs… |
| 1.3.6.1.4.1.562.2.4.1.70.9.12.1.209 | ColumnfrNniLtsFrameRateTx | read-only | mandatory | This attribute indicates the frame rate being sent to the link. It is calculated using the number of frames sent to the link in one cycle of the patterns. |
| 1.3.6.1.4.1.562.2.4.1.70.10 | TablefrNniCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.70.10.1 | RowfrNniCidDataEntry | not-accessible | mandatory | An entry in the frNniCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.70.10.1.1 | ColumnfrNniCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.70.11 | TablefrNniStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.70.11.1 | RowfrNniStateEntry | not-accessible | mandatory | An entry in the frNniStateTable. |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.1 | ColumnfrNniAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.2 | ColumnfrNniOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.3 | ColumnfrNniUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.4 | ColumnfrNniAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.5 | ColumnfrNniProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.6 | ColumnfrNniControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.7 | ColumnfrNniAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.8 | ColumnfrNniStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.70.11.1.9 | ColumnfrNniUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.70.12 | TablefrNniStatsTable | not-accessible | mandatory | FrNni/n Statistics This group contains the statistics about the operational behavior of the service at the interface level. |
| 1.3.6.1.4.1.562.2.4.1.70.12.1 | RowfrNniStatsEntry | not-accessible | mandatory | An entry in the frNniStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.12.1.1 | ColumnfrNniLastUnknownDlci | read-only | mandatory | This attribute identifies the most recent DLCI which user frames were received on for which a DLCI has not been provisioned on the port. |
| 1.3.6.1.4.1.562.2.4.1.70.12.1.2 | ColumnfrNniUnknownDlciFramesFromIf | read-only | mandatory | This attribute contains a count of the number of frames received from the interface with an unknown DLCI (DLCI which is not provisioned). When the maximum is r… |
| 1.3.6.1.4.1.562.2.4.1.70.12.1.3 | ColumnfrNniInvalidHeaderFramesFromIf | read-only | mandatory | This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.70.13 | TablefrNniIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.70.13.1 | RowfrNniIfEntryEntry | not-accessible | mandatory | An entry in the frNniIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.70.13.1.1 | ColumnfrNniIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.70.13.1.2 | ColumnfrNniIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.70.14 | TablefrNniOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.70.14.1 | RowfrNniOperStatusEntry | not-accessible | mandatory | An entry in the frNniOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.70.14.1.1 | ColumnfrNniSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.70.15 | TablefrNniEmissionPriorityQsTable | not-accessible | mandatory | This group contains the provisionable attribute to specifie the number of Frame Relay egress emission priority queues to be used on that Frame Relay Interface |
| 1.3.6.1.4.1.562.2.4.1.70.15.1 | RowfrNniEmissionPriorityQsEntry | not-accessible | mandatory | An entry in the frNniEmissionPriorityQsTable. |
| 1.3.6.1.4.1.562.2.4.1.70.15.1.1 | ColumnfrNniNumberOfEmissionQs | read-write | mandatory | This attribute specifies the number of egress emission priority queues that will be used for that Frame Relay interface. The possible values of this attribute … |
| 1.3.6.1.4.1.562.2.4.1.70.341 | TablefrNniFrmToIfByQueueTable | not-accessible | mandatory | This attribute counts the total number of frames transmitted to the interface per egress emission priority queue since the component has been activated. There … |
| 1.3.6.1.4.1.562.2.4.1.70.341.1 | RowfrNniFrmToIfByQueueEntry | not-accessible | mandatory | An entry in the frNniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.70.341.1.1 | ColumnfrNniFrmToIfByQueueIndex | not-accessible | mandatory | This variable represents the index for the frNniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.70.341.1.2 | ColumnfrNniFrmToIfByQueueValue | read-only | mandatory | This variable represents an individual value for the frNniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.70.342 | TablefrNniOctetToIfByQueueTable | not-accessible | mandatory | This attribute counts the total number of octets transmitted from the service to the interface per emission priority queue since the component has been activat… |
| 1.3.6.1.4.1.562.2.4.1.70.342.1 | RowfrNniOctetToIfByQueueEntry | not-accessible | mandatory | An entry in the frNniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.70.342.1.1 | ColumnfrNniOctetToIfByQueueIndex | not-accessible | mandatory | This variable represents the index for the frNniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.70.342.1.2 | ColumnfrNniOctetToIfByQueueValue | read-only | mandatory | This variable represents an individual value for the frNniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.2.23 | NodeframeRelayNniMIB | |||
| 1.3.6.1.4.1.562.2.4.2.23.1 | NodeframeRelayNniGroup | |||
| 1.3.6.1.4.1.562.2.4.2.23.1.5 | NodeframeRelayNniGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.23.1.5.2 | NodeframeRelayNniGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.23.1.5.2.2 | NodeframeRelayNniGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.23.3 | NodeframeRelayNniCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.23.3.5 | NodeframeRelayNniCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.23.3.5.2 | NodeframeRelayNniCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.23.3.5.2.2 | NodeframeRelayNniCapabilitiesBE01A |