Nortel-Magellan-Passport-FrameRelayUniMIB
619 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex PassportCounter64 RowPointer RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString DigitString EnterpriseDateAndTime FixedPoint3 Hex HexString Link NonReplicated Unsigned64 |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.71 | NodefrUni | |||
| 1.3.6.1.4.1.562.2.4.1.71.1 | TablefrUniRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUni components. |
| 1.3.6.1.4.1.562.2.4.1.71.1.1 | RowfrUniRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUni component. |
| 1.3.6.1.4.1.562.2.4.1.71.1.1.1 | ColumnfrUniRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUni components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.1.1.2 | ColumnfrUniComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.1.1.4 | ColumnfrUniStorageType | read-only | mandatory | This variable represents the storage type value for the frUni tables. |
| 1.3.6.1.4.1.562.2.4.1.71.1.1.10 | ColumnfrUniIndex | not-accessible | mandatory | This variable represents the index for the frUni tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2 | NodefrUniDna | |||
| 1.3.6.1.4.1.562.2.4.1.71.2.1 | TablefrUniDnaRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDna components. |
| 1.3.6.1.4.1.562.2.4.1.71.2.1.1 | RowfrUniDnaRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDna component. |
| 1.3.6.1.4.1.562.2.4.1.71.2.1.1.1 | ColumnfrUniDnaRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frUniDna components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.2.1.1.2 | ColumnfrUniDnaComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.2.1.1.4 | ColumnfrUniDnaStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDna tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2.1.1.10 | ColumnfrUniDnaIndex | not-accessible | mandatory | This variable represents the index for the frUniDna tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2.2 | NodefrUniDnaCug | |||
| 1.3.6.1.4.1.562.2.4.1.71.2.2.1 | TablefrUniDnaCugRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDnaCug components. |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.1.1 | RowfrUniDnaCugRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDnaCug component. |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.1.1.1 | ColumnfrUniDnaCugRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniDnaCug components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.1.1.2 | ColumnfrUniDnaCugComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.1.1.4 | ColumnfrUniDnaCugStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDnaCug tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.1.1.10 | ColumnfrUniDnaCugIndex | not-accessible | mandatory | This variable represents the index for the frUniDnaCug tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.10 | TablefrUniDnaCugCugOptionsTable | not-accessible | mandatory | Attributes in this group define ClosedUserGroup options associated with interlockCode. DNA's with the same CUG (interlockCode) can make calls within this group… |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.10.1 | RowfrUniDnaCugCugOptionsEntry | not-accessible | mandatory | An entry in the frUniDnaCugCugOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.10.1.1 | ColumnfrUniDnaCugType | read-write | mandatory | This attribute specifies the CUG type - the CUG is either a national CUG, or an international CUG. International closed user groups are usually established bet… |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.10.1.2 | ColumnfrUniDnaCugDnic | read-write | mandatory | This attribute specifies the dnic (Data Network ID Code) of the CUG by which packet networks are identified. This attribute is not applicable if the CUG is a n… |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.10.1.3 | ColumnfrUniDnaCugInterlockCode | read-write | mandatory | This attribute specifies the CUG identifier of a national or international CUG call. It is an arbitrary number and it also can be called CUG in some descriptio… |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.10.1.4 | ColumnfrUniDnaCugPreferential | read-write | mandatory | The attribute 'preferential', if set to yes indicates that this CUG is the SIMPLE CUG (as defined in ITU X.36 [10/96]), in which case it will be used during th… |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.10.1.5 | ColumnfrUniDnaCugOutCalls | read-write | mandatory | This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) can be made using this particular CUG. If set to a value of dis… |
| 1.3.6.1.4.1.562.2.4.1.71.2.2.10.1.6 | ColumnfrUniDnaCugIncCalls | read-write | mandatory | This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) can be made using this particular CUG. If set to disallowed, then… |
| 1.3.6.1.4.1.562.2.4.1.71.2.3 | NodefrUniDnaHgM | |||
| 1.3.6.1.4.1.562.2.4.1.71.2.3.1 | TablefrUniDnaHgMRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDnaHgM components. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.1.1 | RowfrUniDnaHgMRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDnaHgM component. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.1.1.1 | ColumnfrUniDnaHgMRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniDnaHgM components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.1.1.2 | ColumnfrUniDnaHgMComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.1.1.4 | ColumnfrUniDnaHgMStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDnaHgM tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.1.1.10 | ColumnfrUniDnaHgMIndex | not-accessible | mandatory | This variable represents the index for the frUniDnaHgM tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2 | NodefrUniDnaHgMHgAddr | |||
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.1 | TablefrUniDnaHgMHgAddrRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDnaHgMHgAddr components. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.1.1 | RowfrUniDnaHgMHgAddrRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDnaHgMHgAddr component. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.1.1.1 | ColumnfrUniDnaHgMHgAddrRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniDnaHgMHgAddr components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.1.1.2 | ColumnfrUniDnaHgMHgAddrComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.1.1.4 | ColumnfrUniDnaHgMHgAddrStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDnaHgMHgAddr tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.1.1.10 | ColumnfrUniDnaHgMHgAddrIndex | not-accessible | mandatory | This variable represents the index for the frUniDnaHgMHgAddr tables. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.10 | TablefrUniDnaHgMHgAddrAddrTable | not-accessible | mandatory | This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.10.1 | RowfrUniDnaHgMHgAddrAddrEntry | not-accessible | mandatory | An entry in the frUniDnaHgMHgAddrAddrTable. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.10.1.1 | ColumnfrUniDnaHgMHgAddrNumberingPlanIndicator | read-write | mandatory | This attribute indicates the Numbering Plan Indicator (NPI) of the DNA. The address may belong to X.121 or E.164 plans. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.2.10.1.2 | ColumnfrUniDnaHgMHgAddrDataNetworkAddress | read-write | mandatory | This attribute contains digits which form the unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where … |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.10 | TablefrUniDnaHgMIfTable | not-accessible | mandatory | This group contains the interface parameters between the HuntGroupMember and the hunt group server. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.10.1 | RowfrUniDnaHgMIfEntry | not-accessible | mandatory | An entry in the frUniDnaHgMIfTable. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.10.1.1 | ColumnfrUniDnaHgMAvailabilityUpdateThreshold | read-write | mandatory | This attribute specifies how much availableAggregateCIR can change before an Availability Message Packet (AMP) is sent to the hunt group server informing it of… |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.11 | TablefrUniDnaHgMOpTable | not-accessible | mandatory | This group contains the operational attributes of the HuntGroupMember component. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.11.1 | RowfrUniDnaHgMOpEntry | not-accessible | mandatory | An entry in the frUniDnaHgMOpTable. |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.11.1.1 | ColumnfrUniDnaHgMMaximumAvailableAggregateCir | read-only | mandatory | This attribute indicates the maximum aggregate CIR availability for this hunt group member. It is the sum of the maximum CIRs provisioned for SVCs in the FrUni… |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.11.1.2 | ColumnfrUniDnaHgMAvailableAggregateCir | read-only | mandatory | This attribute indicates the current available aggregate CIR reported to the hunt group in the Availability Message Packet (AMP). It is incremented by the appl… |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.11.1.3 | ColumnfrUniDnaHgMAvailabilityDelta | read-only | mandatory | This attribute indicates the net change in the available aggregate CIR since the last Availability Message Packet (AMP) was sent to the Hunt Group. Once the ab… |
| 1.3.6.1.4.1.562.2.4.1.71.2.3.11.1.5 | ColumnfrUniDnaHgMAvailableDlcis | read-only | mandatory | This attribute indicates the number of DLCIs available for SVCs on the interface associated with this DNA. If this value reaches 0, an AMP with zero availabili… |
| 1.3.6.1.4.1.562.2.4.1.71.2.10 | TablefrUniDnaAddressTable | not-accessible | mandatory | This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes. |
| 1.3.6.1.4.1.562.2.4.1.71.2.10.1 | RowfrUniDnaAddressEntry | not-accessible | mandatory | An entry in the frUniDnaAddressTable. |
| 1.3.6.1.4.1.562.2.4.1.71.2.10.1.1 | ColumnfrUniDnaNumberingPlanIndicator | read-write | mandatory | This attribute indicates the Numbering Plan Indicator (NPI) of the DNA that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet swi… |
| 1.3.6.1.4.1.562.2.4.1.71.2.10.1.2 | ColumnfrUniDnaDataNetworkAddress | read-write | mandatory | This attribute indicates the customer's unique identifier. It is the equivalent of the telephone number in the telephone network. |
| 1.3.6.1.4.1.562.2.4.1.71.2.11 | TablefrUniDnaOutgoingOptionsTable | not-accessible | mandatory | This group defines DNA call options for calls made from the interface. These options are not used for calls arriving to the interface represented by this DNA. |
| 1.3.6.1.4.1.562.2.4.1.71.2.11.1 | RowfrUniDnaOutgoingOptionsEntry | not-accessible | mandatory | An entry in the frUniDnaOutgoingOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.2.11.1.7 | ColumnfrUniDnaOutDefaultPriority | read-write | mandatory | This attribute indicates the default priority of outgoing calls from the DTE to the network. It can be overridden by the discardPriority under DLCI Direct Call… |
| 1.3.6.1.4.1.562.2.4.1.71.2.11.1.11 | ColumnfrUniDnaOutDefaultPathSensitivity | read-write | obsolete | This attribute specifies the default class of path sensitivity to network for all outgoing calls that use this DNA. The chosen default class of path sensitivit… |
| 1.3.6.1.4.1.562.2.4.1.71.2.11.1.12 | ColumnfrUniDnaOutPathSensitivityOverRide | read-write | obsolete | If this attribute is set to yes in the call request, the called end will use the calling end provisioning data on path sensitivity to override its own provisio… |
| 1.3.6.1.4.1.562.2.4.1.71.2.11.1.14 | ColumnfrUniDnaOutDefaultPathReliability | read-write | mandatory | This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) using this particular DNA. T… |
| 1.3.6.1.4.1.562.2.4.1.71.2.11.1.17 | ColumnfrUniDnaOutAccess | read-write | mandatory | This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that outgoing calls … |
| 1.3.6.1.4.1.562.2.4.1.71.2.11.1.18 | ColumnfrUniDnaDefaultTransferPriority | read-write | mandatory | This attribute specifies the default transfer priority for all outgoing calls using this particular DNA. It can be overridden by the transferPriority provision… |
| 1.3.6.1.4.1.562.2.4.1.71.2.11.1.19 | ColumnfrUniDnaTransferPriorityOverRide | read-write | mandatory | When this attribute is set to yes in the call request, the called end will use the calling end provisioning data on transfer priority to override its own provi… |
| 1.3.6.1.4.1.562.2.4.1.71.2.12 | TablefrUniDnaIncomingOptionsTable | not-accessible | mandatory | This group defines options for incoming calls. These options are used for calls arriving to the interface represented by this DNA. For calls originated from th… |
| 1.3.6.1.4.1.562.2.4.1.71.2.12.1 | RowfrUniDnaIncomingOptionsEntry | not-accessible | mandatory | An entry in the frUniDnaIncomingOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.2.12.1.9 | ColumnfrUniDnaIncAccess | read-write | mandatory | This attribute, if set to a value of allowed specifies that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permit… |
| 1.3.6.1.4.1.562.2.4.1.71.2.13 | TablefrUniDnaCallOptionsTable | not-accessible | mandatory | This group defines additional all options for not related to direction of the call. |
| 1.3.6.1.4.1.562.2.4.1.71.2.13.1 | RowfrUniDnaCallOptionsEntry | not-accessible | mandatory | An entry in the frUniDnaCallOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.2.13.1.10 | ColumnfrUniDnaAccountClass | read-write | mandatory | This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and r… |
| 1.3.6.1.4.1.562.2.4.1.71.2.13.1.11 | ColumnfrUniDnaAccountCollection | read-write | mandatory | This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the pa… |
| 1.3.6.1.4.1.562.2.4.1.71.2.13.1.12 | ColumnfrUniDnaServiceExchange | read-write | mandatory | This attribute is an arbitrary number, Data Service Exchange, as entered by the network operator and reported in accounting record. It is converted into an int… |
| 1.3.6.1.4.1.562.2.4.1.71.2.13.1.13 | ColumnfrUniDnaEgressAccounting | read-write | mandatory | This attribute specifies if egress accounting is enabled by the frame relay service. If egress accounting is disabled, only segment counts are collected by the… |
| 1.3.6.1.4.1.562.2.4.1.71.2.13.1.21 | ColumnfrUniDnaDataPath | read-write | mandatory | This attribute specifies the data path to be used by Virtual Circuits on this interface. If the connection has a DirectCall component then the value can be ove… |
| 1.3.6.1.4.1.562.2.4.1.71.3 | NodefrUniFramer | |||
| 1.3.6.1.4.1.562.2.4.1.71.3.1 | TablefrUniFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniFramer components. |
| 1.3.6.1.4.1.562.2.4.1.71.3.1.1 | RowfrUniFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniFramer component. |
| 1.3.6.1.4.1.562.2.4.1.71.3.1.1.1 | ColumnfrUniFramerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniFramer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.3.1.1.2 | ColumnfrUniFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.3.1.1.4 | ColumnfrUniFramerStorageType | read-only | mandatory | This variable represents the storage type value for the frUniFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.71.3.1.1.10 | ColumnfrUniFramerIndex | not-accessible | mandatory | This variable represents the index for the frUniFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.71.3.10 | TablefrUniFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.71.3.10.1 | RowfrUniFramerProvEntry | not-accessible | mandatory | An entry in the frUniFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.71.3.10.1.1 | ColumnfrUniFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.71.3.11 | TablefrUniFramerLinkTable | not-accessible | mandatory | This group contains attributes defining the framing of data on the link interface. |
| 1.3.6.1.4.1.562.2.4.1.71.3.11.1 | RowfrUniFramerLinkEntry | not-accessible | mandatory | An entry in the frUniFramerLinkTable. |
| 1.3.6.1.4.1.562.2.4.1.71.3.11.1.4 | ColumnfrUniFramerFlagsBetweenFrames | read-write | mandatory | This attribute defines the number of flags that are inserted between frames sent to the link interface. |
| 1.3.6.1.4.1.562.2.4.1.71.3.12 | TablefrUniFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.71.3.12.1 | RowfrUniFramerStateEntry | not-accessible | mandatory | An entry in the frUniFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.71.3.12.1.1 | ColumnfrUniFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.71.3.12.1.2 | ColumnfrUniFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.71.3.12.1.3 | ColumnfrUniFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.71.3.13 | TablefrUniFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1 | RowfrUniFramerStatsEntry | not-accessible | mandatory | An entry in the frUniFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.1 | ColumnfrUniFramerFrmToIf | read-only | mandatory | The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, … |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.2 | ColumnfrUniFramerFrmFromIf | read-only | mandatory | The number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.3 | ColumnfrUniFramerOctetFromIf | read-only | mandatory | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.4 | ColumnfrUniFramerAborts | read-only | mandatory | This attribute is the total number of aborts received. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.5 | ColumnfrUniFramerCrcErrors | read-only | mandatory | This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.6 | ColumnfrUniFramerLrcErrors | read-only | mandatory | This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.7 | ColumnfrUniFramerNonOctetErrors | read-only | mandatory | This attribute is the total number of frames that were non octet aligned. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.8 | ColumnfrUniFramerOverruns | read-only | mandatory | This attribute is the total number of frames received from the link for which overruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.9 | ColumnfrUniFramerUnderruns | read-only | mandatory | This attribute is the total number of frames transmitted to the link for which underruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.10 | ColumnfrUniFramerLargeFrmErrors | read-only | mandatory | This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contain… |
| 1.3.6.1.4.1.562.2.4.1.71.3.13.1.11 | ColumnfrUniFramerFrmModeErrors | read-only | mandatory | This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified f… |
| 1.3.6.1.4.1.562.2.4.1.71.3.14 | TablefrUniFramerUtilTable | not-accessible | mandatory | This group contains the link utilizaiton operational data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.71.3.14.1 | RowfrUniFramerUtilEntry | not-accessible | mandatory | An entry in the frUniFramerUtilTable. |
| 1.3.6.1.4.1.562.2.4.1.71.3.14.1.1 | ColumnfrUniFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwi… |
| 1.3.6.1.4.1.562.2.4.1.71.3.14.1.3 | ColumnfrUniFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available … |
| 1.3.6.1.4.1.562.2.4.1.71.4 | NodefrUniLmi | |||
| 1.3.6.1.4.1.562.2.4.1.71.4.1 | TablefrUniLmiRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniLmi components. |
| 1.3.6.1.4.1.562.2.4.1.71.4.1.1 | RowfrUniLmiRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniLmi component. |
| 1.3.6.1.4.1.562.2.4.1.71.4.1.1.1 | ColumnfrUniLmiRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frUniLmi components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.4.1.1.2 | ColumnfrUniLmiComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.4.1.1.4 | ColumnfrUniLmiStorageType | read-only | mandatory | This variable represents the storage type value for the frUniLmi tables. |
| 1.3.6.1.4.1.562.2.4.1.71.4.1.1.10 | ColumnfrUniLmiIndex | not-accessible | mandatory | This variable represents the index for the frUniLmi tables. |
| 1.3.6.1.4.1.562.2.4.1.71.4.10 | TablefrUniLmiParmsTable | not-accessible | mandatory | This group contains the provisionable attributes of the LMI component. |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1 | RowfrUniLmiParmsEntry | not-accessible | mandatory | An entry in the frUniLmiParmsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.1 | ColumnfrUniLmiProcedures | read-write | mandatory | This attribute selects the procedures to be used for the Local Management Interface. The following procedures are supported: none: no Local Management Interfac… |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.2 | ColumnfrUniLmiAsyncStatusReport | read-write | mandatory | This attribute selects the use of asynchronous PVC status report procedures as specified in ANSI, CCITT, and Vendor Forum. This attribute can be set to on or o… |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.3 | ColumnfrUniLmiErrorEventThreshold | read-write | mandatory | An event is defined as follows: (1) receipt of a STATUS ENQUIRY message; or (2) expiration of timer T392. An error event is (1) nonreceipt of STATUS ENQUIRY in… |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.4 | ColumnfrUniLmiEventCount | read-write | mandatory | This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. This attribute corresponds to … |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.5 | ColumnfrUniLmiCheckPointTimer | read-write | mandatory | This attribute selects the time (in seconds) within which a STATUS ENQUIRY message is expected. This attribute corresponds to the nT2 parameter described in th… |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.6 | ColumnfrUniLmiMessageCountTimer | read-write | mandatory | This attribute selects the time (in seconds) within which at most five (this is a fixed value and corresponds to maximum message count in VendorForum) STATUS E… |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.7 | ColumnfrUniLmiIgnoreActiveBit | read-write | mandatory | This attribute specifies whether the Frame Relay LMI Active Bit (A-bit) has a bearing on the transfer of user data across this Frame Relay interface for both d… |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.8 | ColumnfrUniLmiSide | read-write | mandatory | This attribute can be set to user, network, or both. When this attribute is set to user, USP LMI procedures are running. When this attribute is set to network,… |
| 1.3.6.1.4.1.562.2.4.1.71.4.10.1.9 | ColumnfrUniLmiPvcConfigParmsInFsr | read-write | mandatory | When this attribute is set to yes, additional Q.933 information elements are included in the LMI Full Status message to facilitate CPE PVC parameter configurin… |
| 1.3.6.1.4.1.562.2.4.1.71.4.11 | TablefrUniLmiStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.71.4.11.1 | RowfrUniLmiStateEntry | not-accessible | mandatory | An entry in the frUniLmiStateTable. |
| 1.3.6.1.4.1.562.2.4.1.71.4.11.1.1 | ColumnfrUniLmiAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.71.4.11.1.2 | ColumnfrUniLmiOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.71.4.11.1.3 | ColumnfrUniLmiUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.71.4.12 | TablefrUniLmiPsiTable | not-accessible | mandatory | This group provides the protocol status of the Local Management Interface. |
| 1.3.6.1.4.1.562.2.4.1.71.4.12.1 | RowfrUniLmiPsiEntry | not-accessible | mandatory | An entry in the frUniLmiPsiTable. |
| 1.3.6.1.4.1.562.2.4.1.71.4.12.1.1 | ColumnfrUniLmiProtocolStatus | read-only | mandatory | This attribute indicates whether the LMI is in an error condition or whether the LMI procedures are behaving normally. When operating with no LMI protocol, thi… |
| 1.3.6.1.4.1.562.2.4.1.71.4.12.1.2 | ColumnfrUniLmiOpProcedures | read-only | mandatory | The opProcedures attribute indicates the procedures being used for the Local Management Interface. This attribute should be ignored if protocolStatus is not no… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13 | TablefrUniLmiStatsTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay Local Management Interface. |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1 | RowfrUniLmiStatsEntry | not-accessible | mandatory | An entry in the frUniLmiStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.1 | ColumnfrUniLmiKeepAliveStatusToIf | read-only | mandatory | This attribute counts the number of Local Management Interface keep alive status messages sent to the external user device in response to a status enquiry for … |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.2 | ColumnfrUniLmiFullStatusToIf | read-only | mandatory | This attribute counts the number of Local Management Interface full status messages sent to the external user device in response to a status enquiry for keep a… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.3 | ColumnfrUniLmiKeepAliveStatusEnqFromIf | read-only | mandatory | This attribute counts the number of Local Management Interface valid keep alive status enquiry messages received from the external user device. When the maximu… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.4 | ColumnfrUniLmiFullStatusEnqFromIf | read-only | mandatory | This attribute counts the number of Local Management Interface valid full status enquiry messages received from the external user device. When the maximum coun… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.5 | ColumnfrUniLmiNetworkSideEventHistory | read-only | mandatory | This attribute displays the Local Management Interface network side procedure event history in order of occurrence. An event is represented by a single symbol.… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.6 | ColumnfrUniLmiProtocolErrors | read-only | mandatory | This attribute counts the number of Local Management Interface protocol errors. It is the sum of the sequence (sequenceErrors), timeout (pollingVerifTimeouts) … |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.7 | ColumnfrUniLmiUnexpectedIes | read-only | mandatory | This attribute counts the number of Local Management Interface frames received with an Information Element identifier that is unknown or unexpected. An unexpec… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.8 | ColumnfrUniLmiSequenceErrors | read-only | mandatory | This attribute counts the number of Local Management Interface Status Enquiry message sequence errors. A sequence error is receipt of a Status Enquiry message … |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.9 | ColumnfrUniLmiUnexpectedReports | read-only | mandatory | This attribute counts the number of Local Management Interface frames received with an unknown or unexpected report type. An unexpected report type is not a pr… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.10 | ColumnfrUniLmiPollingVerifTimeouts | read-only | mandatory | This attribute counts the number of checkPointTImer (t392) timer expiries occurring on the Local Management Interface. When the maximum count is reached the co… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.11 | ColumnfrUniLmiKeepAliveEnqToIf | read-only | mandatory | This attribute counts the number of Local Management Interface keep alive enquiry status messages sent to the external user device for keep alive status. When … |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.12 | ColumnfrUniLmiFullStatusEnqToIf | read-only | mandatory | This attribute counts the number of Local Management Interface full status messages sent to the external user device in response to a status enquiry for keep a… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.13 | ColumnfrUniLmiUserSideEventHistory | read-only | mandatory | This attribute displays the Local Management Interface user side procedure event history in order of occurrence. An event is represented by a single symbol. A … |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.14 | ColumnfrUniLmiStatusSequenceErrors | read-only | mandatory | This attribute counts the number of Local Management Interface Status message sequence errors. A sequence error is receipt of a Status message with a receive s… |
| 1.3.6.1.4.1.562.2.4.1.71.4.13.1.15 | ColumnfrUniLmiNoStatusReportCount | read-only | mandatory | This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented in t… |
| 1.3.6.1.4.1.562.2.4.1.71.4.14 | TablefrUniLmiUspParmsTable | not-accessible | mandatory | This group contains the provisionable attributes of the Local Management Interface user side procedure. |
| 1.3.6.1.4.1.562.2.4.1.71.4.14.1 | RowfrUniLmiUspParmsEntry | not-accessible | mandatory | An entry in the frUniLmiUspParmsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.4.14.1.1 | ColumnfrUniLmiFullStatusPollingCycles | read-write | mandatory | This attribute specifies how frequently the Frame Relay UNI service should initiate a Status Enquiry for a full PVC status report. A polling cycle is a Status … |
| 1.3.6.1.4.1.562.2.4.1.71.4.14.1.2 | ColumnfrUniLmiLinkVerificationTimer | read-write | mandatory | This attribute specifies how frequently the Frame Relay UNI service should initiate a Status Enquiry for link integrity verification. It must be less than chec… |
| 1.3.6.1.4.1.562.2.4.1.71.5 | NodefrUniDlci | |||
| 1.3.6.1.4.1.562.2.4.1.71.5.1 | TablefrUniDlciRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDlci components. |
| 1.3.6.1.4.1.562.2.4.1.71.5.1.1 | RowfrUniDlciRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDlci component. |
| 1.3.6.1.4.1.562.2.4.1.71.5.1.1.1 | ColumnfrUniDlciRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniDlci components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.5.1.1.2 | ColumnfrUniDlciComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.5.1.1.4 | ColumnfrUniDlciStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDlci tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.1.1.10 | ColumnfrUniDlciIndex | not-accessible | mandatory | This variable represents the index for the frUniDlci tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2 | NodefrUniDlciDc | |||
| 1.3.6.1.4.1.562.2.4.1.71.5.2.1 | TablefrUniDlciDcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDlciDc components. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.1.1 | RowfrUniDlciDcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDlciDc component. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.1.1.1 | ColumnfrUniDlciDcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frUniDlciDc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.1.1.2 | ColumnfrUniDlciDcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.1.1.4 | ColumnfrUniDlciDcStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDlciDc tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.1.1.10 | ColumnfrUniDlciDcIndex | not-accessible | mandatory | This variable represents the index for the frUniDlciDc tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10 | TablefrUniDlciDcOptionsTable | not-accessible | mandatory | Options group defines attributes associated with direct call. It defines complete connection in terms of path and call options. This connection can be permanen… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1 | RowfrUniDlciDcOptionsEntry | not-accessible | mandatory | An entry in the frUniDlciDcOptionsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.3 | ColumnfrUniDlciDcRemoteNpi | read-write | mandatory | Destination Numbering Plan Indicator (Npi) indicates the numbering plan used in the remoteDna. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.4 | ColumnfrUniDlciDcRemoteDna | read-write | mandatory | This attribute specifies the Data Network Address (DNA) of the remote. This is the called (destination) DTE address (DNA) to which this direct call will be sen… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.5 | ColumnfrUniDlciDcRemoteDlci | read-write | mandatory | L(LCN) of the destination. This attribute provides the remote LCN (Logical Channel Number) - it is used only for PVCs, where the parameter Type is set to a val… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.6 | ColumnfrUniDlciDcType | read-write | mandatory | This attribute specifies the type of Vc call: permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSlave. If the value is set to permanent… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.9 | ColumnfrUniDlciDcTransferPriority | read-write | mandatory | This attribute specifies the transfer priority to network for the outgoing calls using this particular DLCI. It overRides the defaultTransferPriority provision… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.10 | ColumnfrUniDlciDcDiscardPriority | read-write | mandatory | This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning values: normal, high, and useDnaDe… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.11 | ColumnfrUniDlciDcDeDiscardPriority | read-write | mandatory | This attribute specifies whether the discardPriority applies to DE frames for this DLCI. If deDiscardPriority is set to determinedByDiscardPriority, traffic wi… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.12 | ColumnfrUniDlciDcDataPath | read-write | mandatory | This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.13 | ColumnfrUniDlciDcCugIndex | read-write | mandatory | This attribute specifies the CUG index which is to be signalled in PVC call requests to the remote end. The type of CUG signalling is defined in attribute cugT… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.10.1.14 | ColumnfrUniDlciDcCugType | read-write | mandatory | This attribute specifies the type of CUG signalling to be used in PVC call request. Index of CUG to be used is defined in attribute cugIndex in this component.… |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.202 | TablefrUniDlciDcNfaTable | not-accessible | obsolete | This is the i'th National facility required for this direct call. Within the provisioning system, the user specifies the facility code along with the facility … |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.202.1 | RowfrUniDlciDcNfaEntry | not-accessible | obsolete | An entry in the frUniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.202.1.1 | ColumnfrUniDlciDcNfaIndex | not-accessible | obsolete | This variable represents the index for the frUniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.202.1.2 | ColumnfrUniDlciDcNfaValue | read-write | obsolete | This variable represents an individual value for the frUniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.2.202.1.3 | ColumnfrUniDlciDcNfaRowStatus | write-only | obsolete | This variable is used to control the addition and deletion of individual values of the frUniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3 | NodefrUniDlciVc | |||
| 1.3.6.1.4.1.562.2.4.1.71.5.3.1 | TablefrUniDlciVcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDlciVc components. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.1.1 | RowfrUniDlciVcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDlciVc component. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.1.1.1 | ColumnfrUniDlciVcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frUniDlciVc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.1.1.2 | ColumnfrUniDlciVcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.1.1.4 | ColumnfrUniDlciVcStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDlciVc tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.1.1.10 | ColumnfrUniDlciVcIndex | not-accessible | mandatory | This variable represents the index for the frUniDlciVc tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10 | TablefrUniDlciVcCadTable | not-accessible | mandatory | This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1 | RowfrUniDlciVcCadEntry | not-accessible | mandatory | An entry in the frUniDlciVcCadTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.1 | ColumnfrUniDlciVcType | read-only | mandatory | This attribute displays the type of call, pvc,svc or spvc. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.2 | ColumnfrUniDlciVcState | read-only | mandatory | This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very sho… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.3 | ColumnfrUniDlciVcPreviousState | read-only | mandatory | This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.4 | ColumnfrUniDlciVcDiagnosticCode | read-only | mandatory | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.5 | ColumnfrUniDlciVcPreviousDiagnosticCode | read-only | mandatory | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.6 | ColumnfrUniDlciVcCalledNpi | read-only | mandatory | This attribute displays the Numbering Plan Indicator (NPI) of the called end. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.7 | ColumnfrUniDlciVcCalledDna | read-only | mandatory | This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end wil… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.8 | ColumnfrUniDlciVcCalledLcn | read-only | mandatory | This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.9 | ColumnfrUniDlciVcCallingNpi | read-only | mandatory | This attribute displays the Numbering Plan Indicator (NPI) of the calling end. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.10 | ColumnfrUniDlciVcCallingDna | read-only | mandatory | This attribute displays the Data Network Address (Dna) of the calling end. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.11 | ColumnfrUniDlciVcCallingLcn | read-only | mandatory | This attribute displays the Logical Channel Number of the calling end. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.12 | ColumnfrUniDlciVcAccountingEnabled | read-only | mandatory | This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of … |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.13 | ColumnfrUniDlciVcFastSelectCall | read-only | mandatory | This attribute displays that this is a fast select call. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.19 | ColumnfrUniDlciVcPathReliability | read-only | mandatory | This attribute displays the path reliability. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.20 | ColumnfrUniDlciVcAccountingEnd | read-only | mandatory | This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.21 | ColumnfrUniDlciVcPriority | read-only | mandatory | This attribute displays whether the call is a normal or a high priority call. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.22 | ColumnfrUniDlciVcSegmentSize | read-only | mandatory | This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.27 | ColumnfrUniDlciVcMaxSubnetPktSize | read-only | mandatory | This attribute indicates the maximum packet size allowed on the Vc. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.28 | ColumnfrUniDlciVcRcosToNetwork | read-only | mandatory | This attribute indicates the routing metric routing class of service to the network. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.29 | ColumnfrUniDlciVcRcosFromNetwork | read-only | mandatory | This attribute displays the routing metric Routing Class of Service from the Network. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.30 | ColumnfrUniDlciVcEmissionPriorityToNetwork | read-only | mandatory | This attribute displays the network internal emission priotity to the network. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.31 | ColumnfrUniDlciVcEmissionPriorityFromNetwork | read-only | mandatory | This attribute displays the network internal emission priotity from the network. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.10.1.32 | ColumnfrUniDlciVcDataPath | read-only | mandatory | This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attri… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.11 | TablefrUniDlciVcIntdTable | not-accessible | mandatory | This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.11.1 | RowfrUniDlciVcIntdEntry | not-accessible | mandatory | An entry in the frUniDlciVcIntdTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.11.1.1 | ColumnfrUniDlciVcCallReferenceNumber | read-only | mandatory | This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval dat… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.11.1.2 | ColumnfrUniDlciVcElapsedTimeTillNow | read-only | mandatory | This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.11.1.3 | ColumnfrUniDlciVcSegmentsRx | read-only | mandatory | This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.11.1.4 | ColumnfrUniDlciVcSegmentsSent | read-only | mandatory | This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. V… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.11.1.5 | ColumnfrUniDlciVcStartTime | read-only | mandatory | This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 ho… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12 | TablefrUniDlciVcFrdTable | not-accessible | mandatory | This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand t… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1 | RowfrUniDlciVcFrdEntry | not-accessible | mandatory | An entry in the frUniDlciVcFrdTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.2 | ColumnfrUniDlciVcFrmCongestedToSubnet | read-only | mandatory | This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be dis… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.3 | ColumnfrUniDlciVcCannotForwardToSubnet | read-only | mandatory | This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link disc… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.4 | ColumnfrUniDlciVcNotDataXferToSubnet | read-only | mandatory | This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.5 | ColumnfrUniDlciVcOutOfRangeFrmFromSubnet | read-only | mandatory | This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.6 | ColumnfrUniDlciVcCombErrorsFromSubnet | read-only | mandatory | This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs wh… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.7 | ColumnfrUniDlciVcDuplicatesFromSubnet | read-only | mandatory | This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.8 | ColumnfrUniDlciVcNotDataXferFromSubnet | read-only | mandatory | This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.9 | ColumnfrUniDlciVcFrmLossTimeouts | read-only | mandatory | This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.10 | ColumnfrUniDlciVcOoSeqByteCntExceeded | read-only | mandatory | This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if t… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.11 | ColumnfrUniDlciVcPeakOoSeqPktCount | read-only | mandatory | This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.12 | ColumnfrUniDlciVcPeakOoSeqFrmForwarded | read-only | mandatory | This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.13 | ColumnfrUniDlciVcSendSequenceNumber | read-only | mandatory | This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.15 | ColumnfrUniDlciVcPktRetryTimeouts | read-only | mandatory | This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.16 | ColumnfrUniDlciVcPeakRetryQueueSize | read-only | mandatory | This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.17 | ColumnfrUniDlciVcSubnetRecoveries | read-only | mandatory | This attribute displays the number of successful Vc recovery attempts. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.19 | ColumnfrUniDlciVcOoSeqPktCntExceeded | read-only | mandatory | This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.12.1.20 | ColumnfrUniDlciVcPeakOoSeqByteCount | read-only | mandatory | This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced q… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.417 | TablefrUniDlciVcDmepTable | not-accessible | mandatory | This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly da… |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.417.1 | RowfrUniDlciVcDmepEntry | not-accessible | mandatory | An entry in the frUniDlciVcDmepTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.3.417.1.1 | ColumnfrUniDlciVcDmepValue | read-only | mandatory | This variable represents both the value and the index for the frUniDlciVcDmepTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.4 | NodefrUniDlciSp | |||
| 1.3.6.1.4.1.562.2.4.1.71.5.4.1 | TablefrUniDlciSpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDlciSp components. |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.1.1 | RowfrUniDlciSpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDlciSp component. |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.1.1.1 | ColumnfrUniDlciSpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frUniDlciSp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.1.1.2 | ColumnfrUniDlciSpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.1.1.4 | ColumnfrUniDlciSpStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDlciSp tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.1.1.10 | ColumnfrUniDlciSpIndex | not-accessible | mandatory | This variable represents the index for the frUniDlciSp tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11 | TablefrUniDlciSpParmsTable | not-accessible | mandatory | This group contains the provisionable attributes for the Data Link Connection Identifier. These attributes reflect the service parameters specific to this inst… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1 | RowfrUniDlciSpParmsEntry | not-accessible | mandatory | An entry in the frUniDlciSpParmsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.1 | ColumnfrUniDlciSpMaximumFrameSize | read-write | mandatory | This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.2 | ColumnfrUniDlciSpRateEnforcement | read-write | mandatory | This attribute specifies whether rate enforcement is in effect for this user Data Link Connection on this Frame Relay interface. Turning on rate enforcement me… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.3 | ColumnfrUniDlciSpCommittedInformationRate | read-write | mandatory | This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the netwo… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.4 | ColumnfrUniDlciSpCommittedBurstSize | read-write | mandatory | This attribute specifies the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measu… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.5 | ColumnfrUniDlciSpExcessBurstSize | read-write | mandatory | This attribute specifies the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement int… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.6 | ColumnfrUniDlciSpMeasurementInterval | read-write | mandatory | When cir and bc are zero and rateEnforcement is on, this attribute must be provisioned to specify the time interval (in milliseconds) over which rates and burs… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.7 | ColumnfrUniDlciSpRateAdaptation | read-write | mandatory | This attribute specifies whether rate adaptation is in effect for this user Data Link Connection on this Frame Relay interface. Rate adaptation is a feature th… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.8 | ColumnfrUniDlciSpAccounting | read-write | mandatory | This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generati… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.9 | ColumnfrUniDlciSpRaSensitivity | read-write | mandatory | This attribute specifies the sensitivity of the rate adaptation system. A higher number indicates a higher sensitivity and therefore a quicker reaction time to… |
| 1.3.6.1.4.1.562.2.4.1.71.5.4.11.1.10 | ColumnfrUniDlciSpUpdateBCI | read-write | mandatory | This attribute specifies whether internal Backward Congestion Indication (BCI) bits will report congestion external to the Passport network, as communicated th… |
| 1.3.6.1.4.1.562.2.4.1.71.5.5 | NodefrUniDlciLb | |||
| 1.3.6.1.4.1.562.2.4.1.71.5.5.1 | TablefrUniDlciLbRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniDlciLb components. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.1.1 | RowfrUniDlciLbRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniDlciLb component. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.1.1.1 | ColumnfrUniDlciLbRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of frUniDlciLb components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.1.1.2 | ColumnfrUniDlciLbComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.1.1.4 | ColumnfrUniDlciLbStorageType | read-only | mandatory | This variable represents the storage type value for the frUniDlciLb tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.1.1.10 | ColumnfrUniDlciLbIndex | not-accessible | mandatory | This variable represents the index for the frUniDlciLb tables. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10 | TablefrUniDlciLbStatsTable | not-accessible | mandatory | This group contains all the statistics for the data loopback tool. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1 | RowfrUniDlciLbStatsEntry | not-accessible | mandatory | An entry in the frUniDlciLbStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.1 | ColumnfrUniDlciLbLocalTotalFrm | read-only | mandatory | This attribute records the number of frames looped back to the link since loopback was last started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.2 | ColumnfrUniDlciLbLocalTotalBytes | read-only | mandatory | This attribute records the number of bytes looped back to the link since loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.3 | ColumnfrUniDlciLbLocalFecnFrm | read-only | mandatory | This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the link since the loopback mode w… |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.4 | ColumnfrUniDlciLbLocalBecnFrm | read-only | mandatory | This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the link since the loopback mode … |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.5 | ColumnfrUniDlciLbLocalDeFrm | read-only | mandatory | This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.6 | ColumnfrUniDlciLbLocalDeBytes | read-only | mandatory | This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.7 | ColumnfrUniDlciLbRemoteTotalFrm | read-only | mandatory | This attribute records the number of frames looped back to the subnet since loopback was last started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.8 | ColumnfrUniDlciLbRemoteTotalBytes | read-only | mandatory | This attribute records the number of bytes looped back to the subnet since loopback was last started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.9 | ColumnfrUniDlciLbRemoteFecnFrm | read-only | mandatory | This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the subnet since the loopback mode… |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.10 | ColumnfrUniDlciLbRemoteBecnFrm | read-only | mandatory | This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the subnet since the loopback mod… |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.13 | ColumnfrUniDlciLbRemoteDeFrm | read-only | mandatory | This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.5.10.1.14 | ColumnfrUniDlciLbRemoteDeBytes | read-only | mandatory | This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started. |
| 1.3.6.1.4.1.562.2.4.1.71.5.10 | TablefrUniDlciStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1 | RowfrUniDlciStateEntry | not-accessible | mandatory | An entry in the frUniDlciStateTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.1 | ColumnfrUniDlciAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.2 | ColumnfrUniDlciOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.3 | ColumnfrUniDlciUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.4 | ColumnfrUniDlciAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.5 | ColumnfrUniDlciProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.6 | ColumnfrUniDlciControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.7 | ColumnfrUniDlciAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.8 | ColumnfrUniDlciStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.71.5.10.1.9 | ColumnfrUniDlciUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.71.5.12 | TablefrUniDlciAbitTable | not-accessible | mandatory | This group contains the A-Bit status information for this Data Link Connection Identifier. A-Bit status information is only applicable for PVCs. For SVCs, the … |
| 1.3.6.1.4.1.562.2.4.1.71.5.12.1 | RowfrUniDlciAbitEntry | not-accessible | mandatory | An entry in the frUniDlciAbitTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.12.1.1 | ColumnfrUniDlciABitStatusToIf | read-only | mandatory | This attribute is the most recent A-bit status sent to the interface. The A-bit status is part of the LMI protocol, and indicates willingness to accept data fr… |
| 1.3.6.1.4.1.562.2.4.1.71.5.12.1.2 | ColumnfrUniDlciABitReasonToIf | read-only | mandatory | This attribute provides the reason (if any) for an inactive status to be sent to the interface. This reason is not applicable for an active status. |
| 1.3.6.1.4.1.562.2.4.1.71.5.12.1.3 | ColumnfrUniDlciABitStatusFromIf | read-only | mandatory | This attribute is the most recent A-Bit status received from the interface. |
| 1.3.6.1.4.1.562.2.4.1.71.5.12.1.4 | ColumnfrUniDlciABitReasonFromIf | read-only | mandatory | This attribute provides the reason (if any) for an inactive status to be sent to the subnet. This reason is not applicable for an active status. |
| 1.3.6.1.4.1.562.2.4.1.71.5.12.1.5 | ColumnfrUniDlciLoopbackState | read-only | mandatory | This attribute has the value on when the DLCI is in loopback mode and off otherwise. This loopback command verbs start and stop are used to initiate and termin… |
| 1.3.6.1.4.1.562.2.4.1.71.5.13 | TablefrUniDlciCalldTable | not-accessible | mandatory | This group of attributes describes the characteristics of the call such as call type and call state. |
| 1.3.6.1.4.1.562.2.4.1.71.5.13.1 | RowfrUniDlciCalldEntry | not-accessible | mandatory | An entry in the frUniDlciCalldTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.13.1.1 | ColumnfrUniDlciCallType | read-only | mandatory | This attribute specifies whether this DLCI is a permancent virtual circuit (PVC) or a switched virtual circuit (SVC). |
| 1.3.6.1.4.1.562.2.4.1.71.5.13.1.2 | ColumnfrUniDlciQ933CallState | read-only | mandatory | This attribute specifies the Q.933 state of an SVC call. The value of this attribute for a PVC is always notApplicable. In the description that follows, 'local… |
| 1.3.6.1.4.1.562.2.4.1.71.5.13.1.3 | ColumnfrUniDlciQ933CallReference | read-only | mandatory | This attribute specifies the Q.933 call reference number associated with this DLCI. The value of this attribute for a PVC is always 0. |
| 1.3.6.1.4.1.562.2.4.1.71.5.14 | TablefrUniDlciSpOpTable | not-accessible | mandatory | This group contains the service parameters specific to this instance of DLCI. For PVCs, the values of attributes with the exception of measurementInterval shou… |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1 | RowfrUniDlciSpOpEntry | not-accessible | mandatory | An entry in the frUniDlciSpOpTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.1 | ColumnfrUniDlciMaximumFrameSize | read-only | mandatory | This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in… |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.2 | ColumnfrUniDlciRateEnforcement | read-only | obsolete | This attribute is obsolete. It provided the same information as the provisioning attribute rateEnforcement in dlci/* sp. DESCRIPTION |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.3 | ColumnfrUniDlciCommittedInformationRate | read-only | mandatory | This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the netwo… |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.4 | ColumnfrUniDlciCommittedBurstSize | read-only | mandatory | This attribute specifies the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measu… |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.5 | ColumnfrUniDlciExcessBurstSize | read-only | mandatory | This attribute specifies the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement int… |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.6 | ColumnfrUniDlciMeasurementInterval | read-only | mandatory | This attribute specifies the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute should be ignored when rateEnforceme… |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.7 | ColumnfrUniDlciRateAdaptation | read-only | obsolete | This attribute is obsolete. It provided the information which is now in the provision attribute rateAdaptation in dlci/* sp. |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.8 | ColumnfrUniDlciAccounting | read-only | mandatory | This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generati… |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.9 | ColumnfrUniDlciEmissionPriorityToIf | read-only | mandatory | This attribute indicates the emission priority of frames sent to the interface. A larger value denotes a higher priority. |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.10 | ColumnfrUniDlciTransferPriToNwk | read-only | mandatory | This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configured for an application accordin… |
| 1.3.6.1.4.1.562.2.4.1.71.5.14.1.11 | ColumnfrUniDlciTransferPriFromNwk | read-only | mandatory | This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference configured for an application accord… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15 | TablefrUniDlciStatsTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay Data Link Connection Identifier. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1 | RowfrUniDlciStatsEntry | not-accessible | mandatory | An entry in the frUniDlciStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.1 | ColumnfrUniDlciFrmToIf | read-only | mandatory | This attribute counts the frames sent out the interface. When the maximum count is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.2 | ColumnfrUniDlciFecnFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wrap… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.3 | ColumnfrUniDlciBecnFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wra… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.4 | ColumnfrUniDlciBciToSubnet | read-only | mandatory | This attribute counts the frames sent into the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.5 | ColumnfrUniDlciDeFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.6 | ColumnfrUniDlciDiscCongestedToIf | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the interface. When this count re… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.7 | ColumnfrUniDlciDiscDeCongestedToIf | read-only | mandatory | This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion in the dir… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.8 | ColumnfrUniDlciFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface. It includes the frames that are discarded due to error or excess. When the maximum count is reach… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.9 | ColumnfrUniDlciFecnFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum i… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.10 | ColumnfrUniDlciBecnFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum … |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.11 | ColumnfrUniDlciFciFromSubnet | read-only | mandatory | This attribute counts the frames received from the network with the Forward Congestion Indication (FCI) bit set. When the count reaches maximum it wraps to zer… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.12 | ColumnfrUniDlciBciFromSubnet | read-only | mandatory | This attribute counts the frames received from the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to ze… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.13 | ColumnfrUniDlciDeFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.14 | ColumnfrUniDlciExcessFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enfor… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.15 | ColumnfrUniDlciDiscExcessFromIf | read-only | mandatory | This attribute counts the frames which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.16 | ColumnfrUniDlciDiscFrameAbit | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay Service, due to an inactive PVC status, in the direction toward the network. When this co… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.17 | ColumnfrUniDlciDiscCongestedFromIf | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the network. When this count reac… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.18 | ColumnfrUniDlciDiscDeCongestedFromIf | read-only | mandatory | This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion, in the di… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.19 | ColumnfrUniDlciErrorShortFrmFromIf | read-only | mandatory | This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.20 | ColumnfrUniDlciErrorLongFrmFromIf | read-only | mandatory | This attribute counts the frames received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.21 | ColumnfrUniDlciBecnFrmSetByService | read-only | mandatory | This attribute counts the number of frames with BECN set by the Frame Relay service. It is incremented whenever the Frame Relay service sets BECN on a frame up… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.22 | ColumnfrUniDlciBytesToIf | read-only | mandatory | This attribute counts the bytes sent out the interface. When the maximum count is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.23 | ColumnfrUniDlciDeBytesToIf | read-only | mandatory | This attribute counts the bytes sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.24 | ColumnfrUniDlciDiscCongestedToIfBytes | read-only | mandatory | This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the link. When this count reaches … |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.25 | ColumnfrUniDlciDiscDeCongestedToIfBytes | read-only | mandatory | This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the link. … |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.26 | ColumnfrUniDlciBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface. Bytes that are discarded due to error or excess are not counted. When the maximum count is reached… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.27 | ColumnfrUniDlciDeBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.28 | ColumnfrUniDlciExcessBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforc… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.29 | ColumnfrUniDlciDiscExcessFromIfBytes | read-only | mandatory | This attribute counts the bytes which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.30 | ColumnfrUniDlciDiscByteAbit | read-only | mandatory | This attribute counts the bytes which were discarded due to aBit turned off. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.31 | ColumnfrUniDlciDiscCongestedFromIfBytes | read-only | mandatory | This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the network. When this count reach… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.32 | ColumnfrUniDlciDiscDeCongestedFromIfBytes | read-only | mandatory | This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the networ… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.33 | ColumnfrUniDlciErrorShortBytesFromIf | read-only | mandatory | This attribute counts the bytes received with 0 octets in the information field. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.34 | ColumnfrUniDlciErrorLongBytesFromIf | read-only | mandatory | This attribute counts the bytes received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it … |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.35 | ColumnfrUniDlciRateAdaptReduct | read-only | mandatory | This attribute counts the number of rate reductions due to rate adaptation. Rate adaptation causes the allowed rate to be reduced in steps. After each reductio… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.36 | ColumnfrUniDlciRateAdaptReductPeriod | read-only | mandatory | This attribute provides a cumulative count of the amount of time that rate adaptation procedures have been in effect. When this count reaches maximum, it wraps… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.37 | ColumnfrUniDlciTransferPriorityToNetwork | read-only | obsolete | This attribute is obsolete. It is replaced by attribute transferPriorityToNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.38 | ColumnfrUniDlciTransferPriorityFromNetwork | read-only | obsolete | This attribute is obsolete. It is replaced by attribute transferPriorityToNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp. |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.39 | ColumnfrUniDlciCirPresent | read-only | mandatory | This attribute provides the actual Committed Information Rate (CIR) enforced for this DLCI. This number is in units of 800 bits/ sec, since that is the interna… |
| 1.3.6.1.4.1.562.2.4.1.71.5.15.1.40 | ColumnfrUniDlciEirPresent | read-only | mandatory | This attribute provides the actual Excess Information Rate (EIR) enforced for this DLCI. This number is in units of 800 bits/sec, since that is the internal re… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16 | TablefrUniDlciIntTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay Data Link Connection Identifier interval data. |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1 | RowfrUniDlciIntEntry | not-accessible | mandatory | An entry in the frUniDlciIntTable. |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.1 | ColumnfrUniDlciStartTime | read-only | mandatory | This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 ho… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.2 | ColumnfrUniDlciTotalIngressBytes | read-only | mandatory | This attribute counts the total bytes received from the interface since the start of the interval period. The start of the interval period is captured in the s… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.3 | ColumnfrUniDlciTotalEgressBytes | read-only | mandatory | This attribute counts the total bytes sent to the interface since the start of the interval period. The start of the interval period is captured in the startTi… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.4 | ColumnfrUniDlciEirIngressBytes | read-only | mandatory | This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the int… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.5 | ColumnfrUniDlciEirEgressBytes | read-only | mandatory | This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the … |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.6 | ColumnfrUniDlciDiscardedBytes | read-only | mandatory | This attribute counts the total bytes in invalid frames received from the interface and discarded at the DLCI since the start of the interval period. This coun… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.7 | ColumnfrUniDlciTotalIngressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames received from the … |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.8 | ColumnfrUniDlciTotalEgressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames sent to the interf… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.9 | ColumnfrUniDlciEirIngressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibi… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.10 | ColumnfrUniDlciEirEgressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibi… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.11 | ColumnfrUniDlciDiscardedSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in invalid frames received from th… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.12 | ColumnfrUniDlciCirPresentObs | read-only | obsolete | This attribute has moved to the statistics subgroup. See cirPresent. |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.13 | ColumnfrUniDlciEirPresentObs | read-only | obsolete | This attribute has moved to the statistics subgroup. See eirPresent. |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.14 | ColumnfrUniDlciRateEnforcementPresent | read-only | obsolete | This attribute is obsolete. It is the same as the provisioned rateEnforcement attribute. |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.15 | ColumnfrUniDlciRateAdaptationPresent | read-only | obsolete | This attribute is obsolete. See the provisioning attribute rateAdaptation for the data that it intended to provide. |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.16 | ColumnfrUniDlciLocalRateAdaptOccurred | read-only | mandatory | This attribute specifies whether rate adaptation has occurred on this user Data Link Connection on this Frame Relay interface.The count is reset to 0 when an a… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.17 | ColumnfrUniDlciCallReferenceNumber | read-only | mandatory | This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval dat… |
| 1.3.6.1.4.1.562.2.4.1.71.5.16.1.18 | ColumnfrUniDlciElapsedDifference | read-only | mandatory | This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since the call started. |
| 1.3.6.1.4.1.562.2.4.1.71.6 | NodefrUniSig | |||
| 1.3.6.1.4.1.562.2.4.1.71.6.1 | TablefrUniSigRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniSig components. |
| 1.3.6.1.4.1.562.2.4.1.71.6.1.1 | RowfrUniSigRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniSig component. |
| 1.3.6.1.4.1.562.2.4.1.71.6.1.1.1 | ColumnfrUniSigRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniSig components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.6.1.1.2 | ColumnfrUniSigComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.6.1.1.4 | ColumnfrUniSigStorageType | read-only | mandatory | This variable represents the storage type value for the frUniSig tables. |
| 1.3.6.1.4.1.562.2.4.1.71.6.1.1.10 | ColumnfrUniSigIndex | not-accessible | mandatory | This variable represents the index for the frUniSig tables. |
| 1.3.6.1.4.1.562.2.4.1.71.6.11 | TablefrUniSigRangeTable | not-accessible | mandatory | This group contains the provisionable attribute to define the range of DLCIs for PVCs and SVCs. The purpose of this range is to prevent DLCI collisions between… |
| 1.3.6.1.4.1.562.2.4.1.71.6.11.1 | RowfrUniSigRangeEntry | not-accessible | mandatory | An entry in the frUniSigRangeTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.11.1.1 | ColumnfrUniSigHighestPvcDlci | read-write | mandatory | This attribute specifies the highest DLCI value that can be provisioned for a PVC. If the operator defines a PVC DLCI number higher than this value, the provis… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12 | TablefrUniSigServParmsTable | not-accessible | mandatory | This group contains the provisionable Q.933 service parameters. |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1 | RowfrUniSigServParmsEntry | not-accessible | mandatory | An entry in the frUniSigServParmsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.1 | ColumnfrUniSigMaximumAggregateSvcCir | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction CIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.2 | ColumnfrUniSigMaximumAggregateSvcEir | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction EIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.3 | ColumnfrUniSigMaximumFrameSize | read-write | mandatory | This attribute specifies the maximum number of octets that may be included in the information field of the user DLCI assigned for this call. Its value must not… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.4 | ColumnfrUniSigDefaultMaximumFrameSize | read-write | mandatory | This attribute specifies the default maximum number of octets that may be included in the information field of the user DLCI assigned for this call. This value… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.5 | ColumnfrUniSigDefaultCommittedInformationRate | read-write | mandatory | This attribute specifies the default user to network direction CIR. This value is used during call parameter negotiation for SVC calls on this interface when t… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.6 | ColumnfrUniSigDefaultCommittedBurstSize | read-write | mandatory | This attribute specifies the default user to network direction Bc. This value is used during call parameter negotiation for SVC calls on this interface when th… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.7 | ColumnfrUniSigDefaultExcessBurstSize | read-write | mandatory | This attribute specifies the default user to network direction Be. This value is used during call parameter negotiation for SVC calls on this interface when th… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.8 | ColumnfrUniSigUnlimitedAggregateEir | read-write | mandatory | This attribute specifies whether the network will enforce aggregate EIR during SVC call establishment. The network keeps track of the sum of user to network EI… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.9 | ColumnfrUniSigRateEnforcement | read-write | mandatory | This attribute specifies whether rate enforcement is in effect for SVCs on this interface. |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.10 | ColumnfrUniSigRateAdaptation | read-write | mandatory | This attribute specifies whether closed-loop rate adaptation is in effect for SVCs on this interface. Rate adaptation is a feature that, in periods of congesti… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.11 | ColumnfrUniSigMaximumAggregateSvcCirNormalQ | read-write | mandatory | This attribute specifies the maximum aggregate user to network direction CIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.12 | ColumnfrUniSigMaximumAggregateSvcCirHighQ | read-write | mandatory | This attribute specifies the maximum aggregate user to network direction CIR allowed for SVCs on the interface. It is provisioned as a percentage of the link a… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.13 | ColumnfrUniSigMaximumAggregateSvcCirInterruptQ | read-write | mandatory | This attribute specifies the maximum aggregate user to network direction CIR allowed for SVCs on the interface. It is provisioned as a percentage of the link a… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.14 | ColumnfrUniSigMaximumAggregateSvcEirNormalQ | read-write | mandatory | This attribute specifies the maximum aggregate user to network direction EIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.15 | ColumnfrUniSigMaximumAggregateSvcEirHighQ | read-write | mandatory | This attribute specifies the maximum aggregate user to network direction EIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.16 | ColumnfrUniSigMaximumAggregateSvcEirInterruptQ | read-write | mandatory | This attribute specifies the maximum aggregate user to network direction EIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.17 | ColumnfrUniSigX213IeHandling | read-write | mandatory | The x213IeHandling attribute specifies how Frame Relay handles the X.213 Priority IE when it is in the Q.933 setup message. When the attribute is set to notSup… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.18 | ColumnfrUniSigRaSensitivity | read-write | mandatory | This attribute specifies the sensitivity of the rate adaptation system for Svc's on this interface. Since this attribute is in the Sig Component of an FR Uni c… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.19 | ColumnfrUniSigUpdateBCI | read-write | mandatory | This attribute specifies whether internal Backward Congestion Indication (BCI) bits will report congestion external to the Passport network, as communicated th… |
| 1.3.6.1.4.1.562.2.4.1.71.6.12.1.20 | ColumnfrUniSigDefaultLocCheck | read-write | mandatory | This attribute specifies whether Passport needs to check the location of Cause IE in a Release or a Disc message issued by local DTE. If this bit is set to on,… |
| 1.3.6.1.4.1.562.2.4.1.71.6.13 | TablefrUniSigSysParmsTable | not-accessible | mandatory | This group contains the provisionable Q.933 system parameters. |
| 1.3.6.1.4.1.562.2.4.1.71.6.13.1 | RowfrUniSigSysParmsEntry | not-accessible | mandatory | An entry in the frUniSigSysParmsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.13.1.1 | ColumnfrUniSigCallSetupTimer | read-write | mandatory | This attribute specifies the time the network will wait for a response to the SETUP message sent to the called user. Upon timer expiry, the SETUP message is re… |
| 1.3.6.1.4.1.562.2.4.1.71.6.13.1.2 | ColumnfrUniSigDisconnectTimer | read-write | mandatory | This attribute specifies the time the network will wait for a response to the DISCONNECT message sent to the user. Upon timer expiry, the RELEASE message is se… |
| 1.3.6.1.4.1.562.2.4.1.71.6.13.1.3 | ColumnfrUniSigReleaseTimer | read-write | mandatory | This attribute specifies the time the network will wait for a response to the RELEASE message sent to the user. Upon timer expiry, the RELEASE message is retra… |
| 1.3.6.1.4.1.562.2.4.1.71.6.13.1.4 | ColumnfrUniSigCallProceedingTimer | read-write | mandatory | This attribute specifies the time the network will wait for the CONNECT message from the called user after the network has received the optional CALL PROCEEDIN… |
| 1.3.6.1.4.1.562.2.4.1.71.6.13.1.5 | ColumnfrUniSigNetworkType | read-write | mandatory | This attribute specifies whether this Frame Relay service is running on a public or a private network. This value is used solely in populating applicable infor… |
| 1.3.6.1.4.1.562.2.4.1.71.6.14 | TablefrUniSigLapfSysTable | not-accessible | mandatory | This group contains the provisionable attributes for the SVC data link layer. The data link layer is governed primarily through ITU specification Q.922, and op… |
| 1.3.6.1.4.1.562.2.4.1.71.6.14.1 | RowfrUniSigLapfSysEntry | not-accessible | mandatory | An entry in the frUniSigLapfSysTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.14.1.2 | ColumnfrUniSigWindowSize | read-write | mandatory | This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at an… |
| 1.3.6.1.4.1.562.2.4.1.71.6.14.1.3 | ColumnfrUniSigRetransmitLimit | read-write | mandatory | This attribute specifies the number of times a frame can be retransmitted by the SVC data link layer before appropriate recovery action is taken. |
| 1.3.6.1.4.1.562.2.4.1.71.6.14.1.4 | ColumnfrUniSigAckTimer | read-write | mandatory | This attribute specifies the period in milliseconds that the network will wait for an acknowledgment to a sent frame. The value set for ackTimer must be less t… |
| 1.3.6.1.4.1.562.2.4.1.71.6.14.1.5 | ColumnfrUniSigAckDelayTimer | read-write | mandatory | This attribute specifies the maximum period in milliseconds that the network will wait before sending an acknowledgment for a received in-sequence I-frame. A v… |
| 1.3.6.1.4.1.562.2.4.1.71.6.14.1.6 | ColumnfrUniSigIdleProbeTimer | read-write | mandatory | This attribute specifies the time period in milliseconds the link will be permitted to remain idle (that is, no frames are exchanged on the data link). Upon ex… |
| 1.3.6.1.4.1.562.2.4.1.71.6.15 | TablefrUniSigStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.71.6.15.1 | RowfrUniSigStateEntry | not-accessible | mandatory | An entry in the frUniSigStateTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.15.1.1 | ColumnfrUniSigAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.71.6.15.1.2 | ColumnfrUniSigOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.71.6.15.1.3 | ColumnfrUniSigUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.71.6.16 | TablefrUniSigStatsTable | not-accessible | mandatory | This group contains the statistics related to the SVC signaling layer at the interface level. |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1 | RowfrUniSigStatsEntry | not-accessible | mandatory | An entry in the frUniSigStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.1 | ColumnfrUniSigCurrentNumberOfSvcCalls | read-only | mandatory | This attribute shows the number of Frame Relay SVCs currently existing on this interface. |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.4 | ColumnfrUniSigInCalls | read-only | mandatory | This attribute shows the current number of incoming SVCs on this interface (i.e. the number of SVCs for which this interface represents the destination end of … |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.5 | ColumnfrUniSigInCallsRefused | read-only | mandatory | This attribute counts the number of incoming SVC call requests that are rejected by either this interface or by the called user. When this count reaches maximu… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.6 | ColumnfrUniSigOutCalls | read-only | mandatory | This attribute shows the current number of outgoing SVCs on this interface (i.e. the number of SVCs for which this interface represents the source end of the c… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.7 | ColumnfrUniSigOutCallsFailed | read-only | mandatory | This attribute counts the number of outgoing SVC call requests that are rejected by either this interface, or by the network side of the destination end, or by… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.8 | ColumnfrUniSigProtocolErrors | read-only | mandatory | This attribute counts the number of times a Q.933 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-sig… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.9 | ColumnfrUniSigQualityOfServiceNotAvailable | read-only | mandatory | This attribute counts the number of incoming and outgoing SVCs that are rejected because the quality of service requested cannot be met by the network. When th… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.10 | ColumnfrUniSigSetupTimeout | read-only | mandatory | This attribute counts the number of times the T303 setup timer has expired. When this count reaches maximum, it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.11 | ColumnfrUniSigLastCauseInStatusMsgReceived | read-only | mandatory | This attribute shows the cause value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is specified… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.12 | ColumnfrUniSigLastStateInStatusMsgReceived | read-only | mandatory | This attribute shows the state value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is specified… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.13 | ColumnfrUniSigLastDlciReceivedStatus | read-only | mandatory | This attribute shows the value of the DLCI that has most recently received a STATUS message from the user. The initial value of this attribute is 0. |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.14 | ColumnfrUniSigLastQ933StateReceivedStatus | read-only | mandatory | This attribute shows the network Q.933 state of the DLCI that has most recently received a STATUS message from the user. The DLCI to which this STATUS message … |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.15 | ColumnfrUniSigLastTimeMsgBlockCongested | read-only | mandatory | This attribute displays the most recent time that an SVC DLCI has failed to get a message block due to message block congestion. Exceptional behavior can occur… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.16 | ColumnfrUniSigLastDlciWithMsgBlockCongestion | read-only | mandatory | This attribute shows the value of the DLCI that has most recently failed to get a message block due to message block congestion. The initial value of this attr… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.17 | ColumnfrUniSigCurrentAggregateSvcCirNormalQ | read-only | mandatory | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through normal priority queue) assigned to existing SVCs on the interface. Th… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.18 | ColumnfrUniSigCurrentAggregateSvcCirHighQ | read-only | mandatory | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through high priority queue) assigned to existing SVCs on the interface. The … |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.19 | ColumnfrUniSigCurrentAggregateSvcCirInterruptQ | read-only | mandatory | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through interrupting queue) assigned to existing SVCs on the interface. The v… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.20 | ColumnfrUniSigCurrentAggregateSvcEirNormalQ | read-only | mandatory | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through normal priority queue) assigned to existing SVCs on the interf… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.21 | ColumnfrUniSigCurrentAggregateSvcEirHighQ | read-only | mandatory | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through high priority queue) assigned to existing SVCs on the interfac… |
| 1.3.6.1.4.1.562.2.4.1.71.6.16.1.22 | ColumnfrUniSigCurrentAggregateSvcEirInterruptQ | read-only | mandatory | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through interrupting queue) assigned to existing SVCs on the interface… |
| 1.3.6.1.4.1.562.2.4.1.71.6.17 | TablefrUniSigLapfStatusTable | not-accessible | mandatory | This group contains the Q.922 SVC data link layer status. |
| 1.3.6.1.4.1.562.2.4.1.71.6.17.1 | RowfrUniSigLapfStatusEntry | not-accessible | mandatory | An entry in the frUniSigLapfStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.17.1.1 | ColumnfrUniSigCurrentState | read-only | mandatory | This attribute shows the current state of the SVC data link layer interface. |
| 1.3.6.1.4.1.562.2.4.1.71.6.17.1.2 | ColumnfrUniSigLastStateChangeReason | read-only | mandatory | This attribute shows the reason for the most recent state change. notStarted - this is the default state after SVC data link has just been created. abmeEntered… |
| 1.3.6.1.4.1.562.2.4.1.71.6.17.1.3 | ColumnfrUniSigFrmrReceive | read-only | mandatory | This attribute shows the information field of the FRMR most recently received. |
| 1.3.6.1.4.1.562.2.4.1.71.6.17.1.4 | ColumnfrUniSigCurrentQueueSize | read-only | mandatory | This attribute shows the current number of frames in the SVC data link layer transmit queue. |
| 1.3.6.1.4.1.562.2.4.1.71.6.18 | TablefrUniSigLapfStatsTable | not-accessible | mandatory | This group contains the statistics for the SVC data link layer. |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1 | RowfrUniSigLapfStatsEntry | not-accessible | mandatory | An entry in the frUniSigLapfStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1.1 | ColumnfrUniSigStateChange | read-only | mandatory | This attribute counts the number of times the SVC data link layer interface has changed state. Frequent state changes may indicate a problem with the line qual… |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1.2 | ColumnfrUniSigRemoteBusy | read-only | mandatory | This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). … |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1.3 | ColumnfrUniSigReceiveRejectFrame | read-only | mandatory | This attribute counts the number of REJ frames received by the interface. When this count reaches maximum, it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1.4 | ColumnfrUniSigAckTimeout | read-only | mandatory | This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate a problem at the link or improper values have … |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1.5 | ColumnfrUniSigIFramesTransmitted | read-only | mandatory | This attribute counts the number of SVC I-frames transmitted to the interface on DLCI 0. An I-frame may be counted more than once if there are retransmissions … |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1.6 | ColumnfrUniSigIFramesTxDiscarded | read-only | mandatory | This attribute counts the number of SVC I-frames that are bound for the link but have been discarded. Discard reasons may be one of the following: 1. the frame… |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1.7 | ColumnfrUniSigIFramesReceived | read-only | mandatory | This attribute counts the number of SVC I-frames received from the interface. When this count reaches maximum, it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.6.18.1.8 | ColumnfrUniSigIFramesRcvdDiscarded | read-only | mandatory | This attribute counts the number of SVC I-frames received but have been discarded. The discard reasons are: 1. incorrect frame size 2. frame is out of sequence… |
| 1.3.6.1.4.1.562.2.4.1.71.6.19 | TablefrUniSigSvcaccTable | not-accessible | mandatory | This group contains the provisionable attribute to define the defaultAccounting attribute.. |
| 1.3.6.1.4.1.562.2.4.1.71.6.19.1 | RowfrUniSigSvcaccEntry | not-accessible | mandatory | An entry in the frUniSigSvcaccTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.19.1.1 | ColumnfrUniSigDefaultAccounting | read-write | mandatory | This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generati… |
| 1.3.6.1.4.1.562.2.4.1.71.6.20 | TablefrUniSigCodesTable | not-accessible | mandatory | This group contains the remote data network address, the last SVC clear cause and the last SVC diagnostic code coming from the subnet or the local VC. |
| 1.3.6.1.4.1.562.2.4.1.71.6.20.1 | RowfrUniSigCodesEntry | not-accessible | mandatory | An entry in the frUniSigCodesTable. |
| 1.3.6.1.4.1.562.2.4.1.71.6.20.1.1 | ColumnfrUniSigLastClearRemoteDataNetworkAddress | read-only | mandatory | This attribute indicates the Data Network Address (DNA) of the remote (the other end of the SVC connection) of the call which cleared last and whose clear and … |
| 1.3.6.1.4.1.562.2.4.1.71.6.20.1.2 | ColumnfrUniSigLastClearCause | read-only | mandatory | This attribute indicates the last SVC clear cause signalled at the end of the connection or failure to connect. It is updated only if the clear request comes f… |
| 1.3.6.1.4.1.562.2.4.1.71.6.20.1.3 | ColumnfrUniSigLastDiagnosticCode | read-only | mandatory | This attribute indicates the last SVC diagnostic code signalled at the end of the connection or failure to connect. It is updated if the clear request comes fr… |
| 1.3.6.1.4.1.562.2.4.1.71.8 | NodefrUniVFramer | |||
| 1.3.6.1.4.1.562.2.4.1.71.8.1 | TablefrUniVFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniVFramer components. |
| 1.3.6.1.4.1.562.2.4.1.71.8.1.1 | RowfrUniVFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniVFramer component. |
| 1.3.6.1.4.1.562.2.4.1.71.8.1.1.1 | ColumnfrUniVFramerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniVFramer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.8.1.1.2 | ColumnfrUniVFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.8.1.1.4 | ColumnfrUniVFramerStorageType | read-only | mandatory | This variable represents the storage type value for the frUniVFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.71.8.1.1.10 | ColumnfrUniVFramerIndex | not-accessible | mandatory | This variable represents the index for the frUniVFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.71.8.10 | TablefrUniVFramerProvTable | not-accessible | mandatory | This group contains provisionable attributes for the VirtualFramer component. |
| 1.3.6.1.4.1.562.2.4.1.71.8.10.1 | RowfrUniVFramerProvEntry | not-accessible | mandatory | An entry in the frUniVFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.71.8.10.1.1 | ColumnfrUniVFramerOtherVirtualFramer | read-write | mandatory | This attribute specifies the other VirtualFramer to which the service is linked, for example, FrUni/n VirtualFramer, FrDte/n VirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.71.8.10.1.2 | ColumnfrUniVFramerLogicalProcessor | read-write | mandatory | This attribute specifies the logical processor on which the service component will reside. |
| 1.3.6.1.4.1.562.2.4.1.71.8.11 | TablefrUniVFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.71.8.11.1 | RowfrUniVFramerStateEntry | not-accessible | mandatory | An entry in the frUniVFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.71.8.11.1.1 | ColumnfrUniVFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.71.8.11.1.2 | ColumnfrUniVFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.71.8.11.1.3 | ColumnfrUniVFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.71.8.12 | TablefrUniVFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a VirtualFramer component. |
| 1.3.6.1.4.1.562.2.4.1.71.8.12.1 | RowfrUniVFramerStatsEntry | not-accessible | mandatory | An entry in the frUniVFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.8.12.1.2 | ColumnfrUniVFramerFrmToOtherVFramer | read-only | mandatory | This attribute counts the frames transmitted to the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.71.8.12.1.3 | ColumnfrUniVFramerFrmFromOtherVFramer | read-only | mandatory | This attribute counts the frames received from the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.71.8.12.1.5 | ColumnfrUniVFramerOctetFromOtherVFramer | read-only | mandatory | This attribute counts the octets received from the otherVirtualFramer. |
| 1.3.6.1.4.1.562.2.4.1.71.9 | NodefrUniLts | |||
| 1.3.6.1.4.1.562.2.4.1.71.9.1 | TablefrUniLtsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniLts components. |
| 1.3.6.1.4.1.562.2.4.1.71.9.1.1 | RowfrUniLtsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniLts component. |
| 1.3.6.1.4.1.562.2.4.1.71.9.1.1.1 | ColumnfrUniLtsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniLts components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.9.1.1.2 | ColumnfrUniLtsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.9.1.1.4 | ColumnfrUniLtsStorageType | read-only | mandatory | This variable represents the storage type value for the frUniLts tables. |
| 1.3.6.1.4.1.562.2.4.1.71.9.1.1.10 | ColumnfrUniLtsIndex | not-accessible | mandatory | This variable represents the index for the frUniLts tables. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2 | NodefrUniLtsPat | |||
| 1.3.6.1.4.1.562.2.4.1.71.9.2.1 | TablefrUniLtsPatRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of frUniLtsPat components. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.1.1 | RowfrUniLtsPatRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single frUniLtsPat component. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.1.1.1 | ColumnfrUniLtsPatRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of frUniLtsPat components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.1.1.2 | ColumnfrUniLtsPatComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.1.1.4 | ColumnfrUniLtsPatStorageType | read-only | mandatory | This variable represents the storage type value for the frUniLtsPat tables. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.1.1.10 | ColumnfrUniLtsPatIndex | not-accessible | mandatory | This variable represents the index for the frUniLtsPat tables. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10 | TablefrUniLtsPatDefaultsTable | not-accessible | mandatory | This attribute group contains the specifications of the pattern. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1 | RowfrUniLtsPatDefaultsEntry | not-accessible | mandatory | An entry in the frUniLtsPatDefaultsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.200 | ColumnfrUniLtsPatDefaultDlci | read-write | mandatory | This attribute specifies for which dlci (on the local end) the frames are destined. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.201 | ColumnfrUniLtsPatDefaultNumFrames | read-write | mandatory | This attribute specifies the number of frames in this pattern. This is the number of frames of this type which will be generated in one timeInterval. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.202 | ColumnfrUniLtsPatDefaultDataSize | read-write | mandatory | This attribute specifies the payload size of each frame in bytes. This is in excess to the header. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.203 | ColumnfrUniLtsPatDefaultHeaderBits | read-write | mandatory | This attribute specifies whether the following bits are on/off in the header of each frame. The following bits can be set: BeCn, C/R, De, FeCn Description of b… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.204 | ColumnfrUniLtsPatDefaultHeaderLength | read-write | mandatory | This attribute specifies the size of the frame relay header in bytes. Passport currently only supports a 2-byte header. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.205 | ColumnfrUniLtsPatDefaultEABits | read-write | mandatory | This attribute specifies how the address field extension bits are set in the frame header. Consider the value to be a four bit binary number. For example, 4 = … |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.206 | ColumnfrUniLtsPatDefaultPayloadPattern | read-write | mandatory | This attribute specifies the payload of each frame. The value specified is in hexadecimal, where every two digits represent a byte. A maximum of 24 digits (12 … |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.207 | ColumnfrUniLtsPatDefaultRfc1490Header | read-write | mandatory | This attribute specifies the appropriate RFC 1490 encapsulated header of the frame. A value of 0 indicates no 1490 header. NOTE: This header resides in the fir… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.10.1.208 | ColumnfrUniLtsPatDefaultUseBadLrc | read-write | mandatory | This attribute specifies whether the frames from this pattern are to have a bad LRC prior to being sent to the framer. The LRC is checked while the frame is be… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11 | TablefrUniLtsPatSetupTable | not-accessible | mandatory | This attribute group contains the specifications of the pattern. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1 | RowfrUniLtsPatSetupEntry | not-accessible | mandatory | An entry in the frUniLtsPatSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.200 | ColumnfrUniLtsPatDlci | read-write | mandatory | This attribute specifies for which dlci (on the local end) the frames are destined. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.201 | ColumnfrUniLtsPatNumFrames | read-write | mandatory | This attribute specifies the number of frames in this pattern. This is the number of frames of this type which will be generated in one timeInterval. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.202 | ColumnfrUniLtsPatDataSize | read-write | mandatory | This attribute specifies the payload size of each frame in bytes. This is in excess to the header. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.203 | ColumnfrUniLtsPatHeaderBits | read-write | mandatory | This attribute specifies whether the following bits are on/off in the header of each frame. The following bits can be set: BeCn, C/R, De, FeCn Description of b… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.204 | ColumnfrUniLtsPatHeaderLength | read-write | mandatory | This attribute specifies the size of the frame relay header in bytes. Passport currently only supports a 2-byte header. Valid values are 0, 2, 3, 4. 0 indicate… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.205 | ColumnfrUniLtsPatEaBits | read-write | mandatory | This attribute specifies how the address field extension bits are set in the frame header. Consider the value to be a four bit binary number. For example, 4 = … |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.206 | ColumnfrUniLtsPatPayloadPattern | read-write | mandatory | This attribute specifies the payload of each frame. The value specified is in hexadecimal, where every two digits represent a byte. A maximum of 24 digits (12 … |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.207 | ColumnfrUniLtsPatRfc1490Header | read-write | mandatory | This attribute specifies the appropriate RFC 1490 encapsulated header of the frame. A value of 0 indicates no 1490 header. NOTE: This header resides in the fir… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.11.1.208 | ColumnfrUniLtsPatUseBadLrc | read-write | mandatory | This attribute specifies whether the frames from this pattern are to have a bad LRC prior to being sent to the framer. The LRC is checked while the frame is be… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.12 | TablefrUniLtsPatOpDataTable | not-accessible | mandatory | This group contains the operational attributes which allow changing the pattern outside of provisioning mode. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.12.1 | RowfrUniLtsPatOpDataEntry | not-accessible | mandatory | An entry in the frUniLtsPatOpDataTable. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.12.1.200 | ColumnfrUniLtsPatFramePattern | read-only | mandatory | This attribute displays the first 20 to 24 bytes of the frame payload, depending on the frame relay header size selected. This attribute represents the frame i… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.12.1.201 | ColumnfrUniLtsPatHdlcBitsInserted | read-only | mandatory | This attribute displays how many times a zero bit will be inserted after 5 consecutive 1 bits when a frame from this pattern is sent out. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.13 | TablefrUniLtsPatOpStateTable | not-accessible | mandatory | This group contains the attributes containing the operational statistics of the pattern. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.13.1 | RowfrUniLtsPatOpStateEntry | not-accessible | mandatory | An entry in the frUniLtsPatOpStateTable. |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.13.1.200 | ColumnfrUniLtsPatLoad | read-only | mandatory | This attribute indicates the load due to this particular pattern. The loads associated with all of the provisioned patterns are summed to arrive at the FrLts l… |
| 1.3.6.1.4.1.562.2.4.1.71.9.2.13.1.201 | ColumnfrUniLtsPatStatus | read-write | mandatory | This attributes specifies the administrative state of the pattern. A disabled pattern will not be generated, although it can still be triggered. |
| 1.3.6.1.4.1.562.2.4.1.71.9.10 | TablefrUniLtsSetupTable | not-accessible | mandatory | This attribute group contains the parameters used to configure the behavior of the Frame Relay Load Test System. |
| 1.3.6.1.4.1.562.2.4.1.71.9.10.1 | RowfrUniLtsSetupEntry | not-accessible | mandatory | An entry in the frUniLtsSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.71.9.10.1.200 | ColumnfrUniLtsDuration | read-write | mandatory | This attribute specifies the duration of the test in milliseconds. The test will run until the duration expires or the STOP command is issued. A value of 0 is … |
| 1.3.6.1.4.1.562.2.4.1.71.9.10.1.201 | ColumnfrUniLtsAlgorithm | read-write | mandatory | This attribute specifies which algorithm is used to generate the frames. ContinuousBurst This mode of traffic generation creates traffic at the maximum rate po… |
| 1.3.6.1.4.1.562.2.4.1.71.9.10.1.204 | ColumnfrUniLtsBurstSize | read-write | mandatory | This attribute specifies the number of frames per burst under the delayedBurst and intervalBurst algorithms. |
| 1.3.6.1.4.1.562.2.4.1.71.9.10.1.205 | ColumnfrUniLtsTimeInterval | read-write | mandatory | This attribute specifies the time interval to the specified number of seconds. Granuality is in centiseconds. Maximum is 1 minute. |
| 1.3.6.1.4.1.562.2.4.1.71.9.11 | TablefrUniLtsStateTable | not-accessible | mandatory | This group contains the operation statistics of the load generator. |
| 1.3.6.1.4.1.562.2.4.1.71.9.11.1 | RowfrUniLtsStateEntry | not-accessible | mandatory | An entry in the frUniLtsStateTable. |
| 1.3.6.1.4.1.562.2.4.1.71.9.11.1.200 | ColumnfrUniLtsGeneratorState | read-only | mandatory | This attribute indicates whether the Lts is generating traffic. |
| 1.3.6.1.4.1.562.2.4.1.71.9.11.1.201 | ColumnfrUniLtsCycleIncomplete | read-only | mandatory | This attribute indicates whether the time required to generate all of the enabled patterns is more than timeInterval by a true value. Otherwise, this flag is s… |
| 1.3.6.1.4.1.562.2.4.1.71.9.11.1.202 | ColumnfrUniLtsLastActiveInterval | read-only | mandatory | This attribute indicates the actual time it took to generate all of the enabled patterns in the last cycle. If cycleIncomplete is true, this value should be ze… |
| 1.3.6.1.4.1.562.2.4.1.71.9.11.1.204 | ColumnfrUniLtsLoad | read-only | mandatory | This attribute indicates the load being generated. This value represents that calculated using the set number of ticks. The actual burstTimeInterval may differ… |
| 1.3.6.1.4.1.562.2.4.1.71.9.11.1.205 | ColumnfrUniLtsElapsedGenerationTime | read-only | mandatory | This attribute indicates how many milliseconds have elapsed since the start of this test. |
| 1.3.6.1.4.1.562.2.4.1.71.9.12 | TablefrUniLtsResultsTable | not-accessible | mandatory | This group contains the frame counting attributes for the LTS component. |
| 1.3.6.1.4.1.562.2.4.1.71.9.12.1 | RowfrUniLtsResultsEntry | not-accessible | mandatory | An entry in the frUniLtsResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.9.12.1.200 | ColumnfrUniLtsFramesTx | read-only | mandatory | This attribute specifies the number of frames send to the network since the last time these statistics were cleared. This is similar to the framesToIf attribut… |
| 1.3.6.1.4.1.562.2.4.1.71.9.12.1.204 | ColumnfrUniLtsBytesTx | read-only | mandatory | This attribute indicates the number of bytes sent. |
| 1.3.6.1.4.1.562.2.4.1.71.9.12.1.208 | ColumnfrUniLtsBitRateTx | read-only | mandatory | This attribute indicates the bit rate being sent to the link. It should only differ from the load if the burstTimeInterval would be >= the timeInterval or burs… |
| 1.3.6.1.4.1.562.2.4.1.71.9.12.1.209 | ColumnfrUniLtsFrameRateTx | read-only | mandatory | This attribute indicates the frame rate being sent to the link. It is calculated using the number of frames sent to the link in one cycle of the patterns. |
| 1.3.6.1.4.1.562.2.4.1.71.10 | TablefrUniCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.71.10.1 | RowfrUniCidDataEntry | not-accessible | mandatory | An entry in the frUniCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.71.10.1.1 | ColumnfrUniCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.71.11 | TablefrUniStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.71.11.1 | RowfrUniStateEntry | not-accessible | mandatory | An entry in the frUniStateTable. |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.1 | ColumnfrUniAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.2 | ColumnfrUniOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.3 | ColumnfrUniUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.4 | ColumnfrUniAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.5 | ColumnfrUniProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.6 | ColumnfrUniControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.7 | ColumnfrUniAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.8 | ColumnfrUniStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.71.11.1.9 | ColumnfrUniUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.71.12 | TablefrUniStatsTable | not-accessible | mandatory | FrUni/n Statistics This group contains the statistics about the operational behavior of the service at the interface level. |
| 1.3.6.1.4.1.562.2.4.1.71.12.1 | RowfrUniStatsEntry | not-accessible | mandatory | An entry in the frUniStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.12.1.1 | ColumnfrUniLastUnknownDlci | read-only | mandatory | This attribute identifies the most recent DLCI which user frames were received on for which a DLCI has not been provisioned on the port. |
| 1.3.6.1.4.1.562.2.4.1.71.12.1.2 | ColumnfrUniUnknownDlciFramesFromIf | read-only | mandatory | This attribute contains a count of the number of frames received from the interface with an unknown DLCI (DLCI which is not provisioned). When the maximum is r… |
| 1.3.6.1.4.1.562.2.4.1.71.12.1.3 | ColumnfrUniInvalidHeaderFramesFromIf | read-only | mandatory | This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.71.13 | TablefrUniIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.71.13.1 | RowfrUniIfEntryEntry | not-accessible | mandatory | An entry in the frUniIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.71.13.1.1 | ColumnfrUniIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.71.13.1.2 | ColumnfrUniIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.71.14 | TablefrUniOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.71.14.1 | RowfrUniOperStatusEntry | not-accessible | mandatory | An entry in the frUniOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.71.14.1.1 | ColumnfrUniSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.71.15 | TablefrUniEmissionPriorityQsTable | not-accessible | mandatory | This group contains the provisionable attribute to specifie the number of Frame Relay egress emission priority queues to be used on that Frame Relay Interface |
| 1.3.6.1.4.1.562.2.4.1.71.15.1 | RowfrUniEmissionPriorityQsEntry | not-accessible | mandatory | An entry in the frUniEmissionPriorityQsTable. |
| 1.3.6.1.4.1.562.2.4.1.71.15.1.1 | ColumnfrUniNumberOfEmissionQs | read-write | mandatory | This attribute specifies the number of egress emission priority queues that will be used for that Frame Relay interface. The possible values of this attribute … |
| 1.3.6.1.4.1.562.2.4.1.71.341 | TablefrUniFrmToIfByQueueTable | not-accessible | mandatory | This attribute counts the total number of frames transmitted to the interface per egress emission priority queue since the component has been activated. There … |
| 1.3.6.1.4.1.562.2.4.1.71.341.1 | RowfrUniFrmToIfByQueueEntry | not-accessible | mandatory | An entry in the frUniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.71.341.1.1 | ColumnfrUniFrmToIfByQueueIndex | not-accessible | mandatory | This variable represents the index for the frUniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.71.341.1.2 | ColumnfrUniFrmToIfByQueueValue | read-only | mandatory | This variable represents an individual value for the frUniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.71.342 | TablefrUniOctetToIfByQueueTable | not-accessible | mandatory | This attribute counts the total number of octets transmitted from the service to the interface per emission priority queue since the component has been activat… |
| 1.3.6.1.4.1.562.2.4.1.71.342.1 | RowfrUniOctetToIfByQueueEntry | not-accessible | mandatory | An entry in the frUniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.71.342.1.1 | ColumnfrUniOctetToIfByQueueIndex | not-accessible | mandatory | This variable represents the index for the frUniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.1.71.342.1.2 | ColumnfrUniOctetToIfByQueueValue | read-only | mandatory | This variable represents an individual value for the frUniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.2.4.2.24 | NodeframeRelayUniMIB | |||
| 1.3.6.1.4.1.562.2.4.2.24.1 | NodeframeRelayUniGroup | |||
| 1.3.6.1.4.1.562.2.4.2.24.1.5 | NodeframeRelayUniGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.24.1.5.2 | NodeframeRelayUniGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.24.1.5.2.2 | NodeframeRelayUniGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.24.3 | NodeframeRelayUniCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.24.3.5 | NodeframeRelayUniCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.24.3.5.2 | NodeframeRelayUniCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.24.3.5.2.2 | NodeframeRelayUniCapabilitiesBE01A |