Nortel-Magellan-Passport-HdlcTransparentMIB
149 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex PassportCounter64 RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString EnterpriseDateAndTime Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.82 | Nodehtds | |||
| 1.3.6.1.4.1.562.2.4.1.82.1 | TablehtdsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of htds components. |
| 1.3.6.1.4.1.562.2.4.1.82.1.1 | RowhtdsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single htds component. |
| 1.3.6.1.4.1.562.2.4.1.82.1.1.1 | ColumnhtdsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of htds components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.82.1.1.2 | ColumnhtdsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.82.1.1.4 | ColumnhtdsStorageType | read-only | mandatory | This variable represents the storage type value for the htds tables. |
| 1.3.6.1.4.1.562.2.4.1.82.1.1.10 | ColumnhtdsIndex | not-accessible | mandatory | This variable represents the index for the htds tables. |
| 1.3.6.1.4.1.562.2.4.1.82.2 | NodehtdsFramer | |||
| 1.3.6.1.4.1.562.2.4.1.82.2.1 | TablehtdsFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of htdsFramer components. |
| 1.3.6.1.4.1.562.2.4.1.82.2.1.1 | RowhtdsFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single htdsFramer component. |
| 1.3.6.1.4.1.562.2.4.1.82.2.1.1.1 | ColumnhtdsFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of htdsFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.82.2.1.1.2 | ColumnhtdsFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.82.2.1.1.4 | ColumnhtdsFramerStorageType | read-only | mandatory | This variable represents the storage type value for the htdsFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.82.2.1.1.10 | ColumnhtdsFramerIndex | not-accessible | mandatory | This variable represents the index for the htdsFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.82.2.10 | TablehtdsFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.82.2.10.1 | RowhtdsFramerProvEntry | not-accessible | mandatory | An entry in the htdsFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.82.2.10.1.1 | ColumnhtdsFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.82.2.11 | TablehtdsFramerLinkTable | not-accessible | mandatory | This group contains attributes defining the framing of data on the link interface. |
| 1.3.6.1.4.1.562.2.4.1.82.2.11.1 | RowhtdsFramerLinkEntry | not-accessible | mandatory | An entry in the htdsFramerLinkTable. |
| 1.3.6.1.4.1.562.2.4.1.82.2.11.1.2 | ColumnhtdsFramerDataInversion | read-write | mandatory | This attribute determines whether data bits are to be inverted (1 to 0 and 0 to 1) before transmission of frames to the interface. If the value of this attribu… |
| 1.3.6.1.4.1.562.2.4.1.82.2.11.1.3 | ColumnhtdsFramerNonOctetData | read-write | mandatory | This attribute determines whether the data being received has the potential to be non-octet aligned. If it is set to yes, then neither crc checking and generat… |
| 1.3.6.1.4.1.562.2.4.1.82.2.11.1.4 | ColumnhtdsFramerFrameCrcType | read-write | mandatory | This attribute defines the type of CRC used. The CRC value calculated is appended to the end of the frames transmitted to the link. The CRC value is removed fr… |
| 1.3.6.1.4.1.562.2.4.1.82.2.11.1.5 | ColumnhtdsFramerFlagsBetweenFrames | read-write | mandatory | This attribute defines the number of flags that are inserted between frames sent to the link interface. |
| 1.3.6.1.4.1.562.2.4.1.82.2.11.1.8 | ColumnhtdsFramerLineSignalTransport | read-write | mandatory | This attribute determines how modem status lead information on a V35 or V11 port is handled. When the value of the attribute is set to on, line signal changes … |
| 1.3.6.1.4.1.562.2.4.1.82.2.12 | TablehtdsFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.82.2.12.1 | RowhtdsFramerStateEntry | not-accessible | mandatory | An entry in the htdsFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.82.2.12.1.1 | ColumnhtdsFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.82.2.12.1.2 | ColumnhtdsFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.82.2.12.1.3 | ColumnhtdsFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.82.2.13 | TablehtdsFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1 | RowhtdsFramerStatsEntry | not-accessible | mandatory | An entry in the htdsFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.1 | ColumnhtdsFramerFrmToIf | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.2 | ColumnhtdsFramerFrmFromIf | read-only | mandatory | This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.3 | ColumnhtdsFramerOctetFromIf | read-only | mandatory | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.4 | ColumnhtdsFramerAborts | read-only | mandatory | This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.5 | ColumnhtdsFramerCrcErrors | read-only | mandatory | This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.6 | ColumnhtdsFramerLrcErrors | read-only | mandatory | This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.7 | ColumnhtdsFramerNonOctetErrors | read-only | mandatory | This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.8 | ColumnhtdsFramerOverruns | read-only | mandatory | This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.9 | ColumnhtdsFramerUnderruns | read-only | mandatory | This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum valu… |
| 1.3.6.1.4.1.562.2.4.1.82.2.13.1.10 | ColumnhtdsFramerLargeFrmErrors | read-only | mandatory | This attribute counts the total number of frames received which were too large. The frame was longer than 8 kbytes or it contained more than the 255 block hard… |
| 1.3.6.1.4.1.562.2.4.1.82.2.14 | TablehtdsFramerUtilTable | not-accessible | mandatory | This group contains the link utilization operational data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.82.2.14.1 | RowhtdsFramerUtilEntry | not-accessible | mandatory | An entry in the htdsFramerUtilTable. |
| 1.3.6.1.4.1.562.2.4.1.82.2.14.1.1 | ColumnhtdsFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal priority data sent to the link as a percentage of the available bandwidth allocated for the service on the link… |
| 1.3.6.1.4.1.562.2.4.1.82.2.14.1.3 | ColumnhtdsFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal priority data received from the link as a percentage of the available bandwidth allocated for the service on th… |
| 1.3.6.1.4.1.562.2.4.1.82.3 | NodehtdsPlc | |||
| 1.3.6.1.4.1.562.2.4.1.82.3.1 | TablehtdsPlcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of htdsPlc components. |
| 1.3.6.1.4.1.562.2.4.1.82.3.1.1 | RowhtdsPlcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single htdsPlc component. |
| 1.3.6.1.4.1.562.2.4.1.82.3.1.1.1 | ColumnhtdsPlcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of htdsPlc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.82.3.1.1.2 | ColumnhtdsPlcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.82.3.1.1.4 | ColumnhtdsPlcStorageType | read-only | mandatory | This variable represents the storage type value for the htdsPlc tables. |
| 1.3.6.1.4.1.562.2.4.1.82.3.1.1.10 | ColumnhtdsPlcIndex | not-accessible | mandatory | This variable represents the index for the htdsPlc tables. |
| 1.3.6.1.4.1.562.2.4.1.82.3.10 | TablehtdsPlcProvTable | not-accessible | mandatory | This group contains all provisionable attributes for a permanent logical connection. Note that all of the attributes are valid and provisionable on both ends o… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1 | RowhtdsPlcProvEntry | not-accessible | mandatory | An entry in the htdsPlcProvTable. |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.2 | ColumnhtdsPlcRemoteName | read-write | mandatory | This attribute is the PLC's remote end point's address in the format of a Passport component name The syntax of a component is: 'em/node type/instance'. End po… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.3 | ColumnhtdsPlcSetupPriority | read-write | mandatory | This attribute gives the priority at which a path is established. Zero(0) is the highest priority and four(4) is the lowest. When PORS establishes a path throu… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.4 | ColumnhtdsPlcHoldingPriority | read-write | mandatory | This attribute gives the priority that a path holds once it is established. Zero(0) is the highest priority and four(4) is the lowest. A path's holdingPriority… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.5 | ColumnhtdsPlcRequiredTxBandwidth | read-write | mandatory | This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route. This attribute represents the bandwidth for traf… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.6 | ColumnhtdsPlcRequiredRxBandwidth | read-write | mandatory | This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute represents the bandwidth for traffic … |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.7 | ColumnhtdsPlcRequiredTrafficType | read-write | mandatory | This attribute indicates the type of traffic transmitted over the path. There are eight(8) possible traffic types, and the path can transmit only one of them. … |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.8 | ColumnhtdsPlcPermittedTrunkTypes | read-write | mandatory | This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have been defined, leaving six(6) r… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.9 | ColumnhtdsPlcRequiredSecurity | read-write | mandatory | This attribute indicates the required minimum level of security of the trunks on the route. Zero(0) represents the most secure and seven(7) represents the leas… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.10 | ColumnhtdsPlcRequiredCustomerParm | read-write | mandatory | This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero(0) to seven(7), is chosen by a networ… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.11 | ColumnhtdsPlcPathAttributeToMinimize | read-write | mandatory | This attribute indicates whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and a delay metric associated with… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.12 | ColumnhtdsPlcMaximumAcceptableCost | read-write | mandatory | This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the route. The cost metric is the … |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.13 | ColumnhtdsPlcMaximumAcceptableDelay | read-write | mandatory | This attribute indicates an upper bound on the delay of a route, which is the sum of the delay of all trunks on the route. It should be provisioned with a reas… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.14 | ColumnhtdsPlcEmissionPriority | read-write | mandatory | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of Zero(0) indicates the highest e… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.15 | ColumnhtdsPlcDiscardPriority | read-write | mandatory | This attribute indicates the importance of the packets on the path. One(1) is used for paths carrying the most important traffic, and three(3) is used for path… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.16 | ColumnhtdsPlcPathType | read-write | mandatory | This attribute specifies if the path for this PLC is determined automatically or by static provisioning. The default (normal) is to automatically choose a rout… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.17 | ColumnhtdsPlcPathFailureAction | read-write | mandatory | This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is selected. If disconnectConnection i… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.18 | ColumnhtdsPlcBumpPreference | read-write | mandatory | This attribute controls when bumping occurs in the route selection process. A connection with higher (numerically less) setupPriority may bump a connection wit… |
| 1.3.6.1.4.1.562.2.4.1.82.3.10.1.19 | ColumnhtdsPlcOptimization | read-write | mandatory | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as op… |
| 1.3.6.1.4.1.562.2.4.1.82.3.265 | TablehtdsPlcMpathTable | not-accessible | mandatory | This attribute is optional and specifies the sequence of trunks to be used as the route for the path, thus bypassing PORS' automatic route selection. If the pa… |
| 1.3.6.1.4.1.562.2.4.1.82.3.265.1 | RowhtdsPlcMpathEntry | not-accessible | mandatory | An entry in the htdsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.82.3.265.1.1 | ColumnhtdsPlcMpathIndex | not-accessible | mandatory | This variable represents the htdsPlcMpathTable specific index for the htdsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.82.3.265.1.2 | ColumnhtdsPlcMpathValue | read-write | mandatory | This variable represents an individual value for the htdsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.82.4 | NodehtdsLCo | |||
| 1.3.6.1.4.1.562.2.4.1.82.4.1 | TablehtdsLCoRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of htdsLCo components. |
| 1.3.6.1.4.1.562.2.4.1.82.4.1.1 | RowhtdsLCoRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single htdsLCo component. |
| 1.3.6.1.4.1.562.2.4.1.82.4.1.1.1 | ColumnhtdsLCoRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of htdsLCo components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.82.4.1.1.2 | ColumnhtdsLCoComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.82.4.1.1.4 | ColumnhtdsLCoStorageType | read-only | mandatory | This variable represents the storage type value for the htdsLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.82.4.1.1.10 | ColumnhtdsLCoIndex | not-accessible | mandatory | This variable represents the index for the htdsLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.82.4.10 | TablehtdsLCoPathDataTable | not-accessible | mandatory | This group contains all operational attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1 | RowhtdsLCoPathDataEntry | not-accessible | mandatory | An entry in the htdsLCoPathDataTable. |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.1 | ColumnhtdsLCoState | read-only | mandatory | This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end provisioned or the application ha… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.2 | ColumnhtdsLCoOverrideRemoteName | read-write | mandatory | If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unloc… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.3 | ColumnhtdsLCoEnd | read-only | mandatory | This attribute identifies whether this is the calling or called end of the path. |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.4 | ColumnhtdsLCoCostMetric | read-only | mandatory | This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was est… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.5 | ColumnhtdsLCoDelayMetric | read-only | mandatory | This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the pa… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.6 | ColumnhtdsLCoRoundTripDelay | read-only | mandatory | This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.7 | ColumnhtdsLCoSetupPriority | read-only | mandatory | This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complem… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.8 | ColumnhtdsLCoHoldingPriority | read-only | mandatory | This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.9 | ColumnhtdsLCoRequiredTxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidt… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.10 | ColumnhtdsLCoRequiredRxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth fo… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.11 | ColumnhtdsLCoRequiredTrafficType | read-only | mandatory | This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one … |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.12 | ColumnhtdsLCoPermittedTrunkTypes | read-only | mandatory | This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terr… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.13 | ColumnhtdsLCoRequiredSecurity | read-only | mandatory | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secu… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.14 | ColumnhtdsLCoRequiredCustomerParameter | read-only | mandatory | This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer define… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.15 | ColumnhtdsLCoEmissionPriority | read-only | mandatory | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the e… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.16 | ColumnhtdsLCoDiscardPriority | read-only | mandatory | This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying t… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.17 | ColumnhtdsLCoPathType | read-only | mandatory | This attribute indicates whether the path for this PLC was determined automatically or by static provisioning. Normal pathTypes are selected automatically by R… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.18 | ColumnhtdsLCoRetryCount | read-only | mandatory | This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.19 | ColumnhtdsLCoPathFailureCount | read-only | mandatory | This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the path is up. If a path fails anytim… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.20 | ColumnhtdsLCoReasonForNoRoute | read-only | mandatory | This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-expla… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.21 | ColumnhtdsLCoLastTearDownReason | read-only | mandatory | This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This att… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.22 | ColumnhtdsLCoPathFailureAction | read-only | mandatory | This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is di… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.23 | ColumnhtdsLCoBumpPreference | read-only | mandatory | This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connect… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.24 | ColumnhtdsLCoOptimization | read-only | mandatory | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as op… |
| 1.3.6.1.4.1.562.2.4.1.82.4.10.1.25 | ColumnhtdsLCoPathUpDateTime | read-only | mandatory | This is the time stamp when the current path was established or reestablished. |
| 1.3.6.1.4.1.562.2.4.1.82.4.11 | TablehtdsLCoStatsTable | not-accessible | mandatory | This group contains the operational statistics attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.82.4.11.1 | RowhtdsLCoStatsEntry | not-accessible | mandatory | An entry in the htdsLCoStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.82.4.11.1.1 | ColumnhtdsLCoPktsToNetwork | read-only | mandatory | This attribute counts the number of packets transmitted to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.82.4.11.1.2 | ColumnhtdsLCoBytesToNetwork | read-only | mandatory | This attribute counts the number of bytes sent to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.82.4.11.1.3 | ColumnhtdsLCoPktsFromNetwork | read-only | mandatory | This attribute counts the number of packets received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.82.4.11.1.4 | ColumnhtdsLCoBytesFromNetwork | read-only | mandatory | This attribute counts the number of bytes received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.82.4.264 | TablehtdsLCoPathTable | not-accessible | mandatory | This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path. |
| 1.3.6.1.4.1.562.2.4.1.82.4.264.1 | RowhtdsLCoPathEntry | not-accessible | mandatory | An entry in the htdsLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.82.4.264.1.1 | ColumnhtdsLCoPathValue | read-only | mandatory | This variable represents both the value and the index for the htdsLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.82.10 | TablehtdsCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.82.10.1 | RowhtdsCidDataEntry | not-accessible | mandatory | An entry in the htdsCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.82.10.1.1 | ColumnhtdsCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.82.11 | TablehtdsIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.82.11.1 | RowhtdsIfEntryEntry | not-accessible | mandatory | An entry in the htdsIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.82.11.1.1 | ColumnhtdsIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.82.11.1.2 | ColumnhtdsIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.82.12 | TablehtdsOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.82.12.1 | RowhtdsOperStatusEntry | not-accessible | mandatory | An entry in the htdsOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.82.12.1.1 | ColumnhtdsSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.82.13 | TablehtdsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.82.13.1 | RowhtdsStateEntry | not-accessible | mandatory | An entry in the htdsStateTable. |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.1 | ColumnhtdsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.2 | ColumnhtdsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.3 | ColumnhtdsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.4 | ColumnhtdsAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.5 | ColumnhtdsProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.6 | ColumnhtdsControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.7 | ColumnhtdsAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.8 | ColumnhtdsStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.82.13.1.9 | ColumnhtdsUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.2.47 | NodehdlcTransparentMIB | |||
| 1.3.6.1.4.1.562.2.4.2.47.1 | NodehdlcTransparentGroup | |||
| 1.3.6.1.4.1.562.2.4.2.47.1.3 | NodehdlcTransparentGroupBC | |||
| 1.3.6.1.4.1.562.2.4.2.47.1.3.4 | NodehdlcTransparentGroupBC03 | |||
| 1.3.6.1.4.1.562.2.4.2.47.1.3.4.2 | NodehdlcTransparentGroupBC03A | |||
| 1.3.6.1.4.1.562.2.4.2.47.3 | NodehdlcTransparentCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.47.3.3 | NodehdlcTransparentCapabilitiesBC | |||
| 1.3.6.1.4.1.562.2.4.2.47.3.3.4 | NodehdlcTransparentCapabilitiesBC03 | |||
| 1.3.6.1.4.1.562.2.4.2.47.3.3.4.2 | NodehdlcTransparentCapabilitiesBC03A |