Nortel-Magellan-Passport-LogicalProcessorMIB
1851 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex PassportCounter64 RowPointer RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString EnterpriseDateAndTime Hex Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12 | Nodelp | |||
| 1.3.6.1.4.1.562.2.4.1.12.1 | TablelpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lp components. |
| 1.3.6.1.4.1.562.2.4.1.12.1.1 | RowlpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lp component. |
| 1.3.6.1.4.1.562.2.4.1.12.1.1.1 | ColumnlpRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lp components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.1.1.2 | ColumnlpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.1.1.4 | ColumnlpStorageType | read-only | mandatory | This variable represents the storage type value for the lp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.1.1.10 | ColumnlpIndex | not-accessible | mandatory | This variable represents the index for the lp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5 | NodelpDS3 | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.1 | TablelpDS3RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3 components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.1.1 | RowlpDS3RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3 component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.1.1.1 | ColumnlpDS3RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS3 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.1.1.2 | ColumnlpDS3ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.1.1.4 | ColumnlpDS3StorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.1.1.10 | ColumnlpDS3Index | not-accessible | mandatory | This variable represents the index for the lpDS3 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2 | NodelpDS3Test | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.2.1 | TablelpDS3TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3Test components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1 | RowlpDS3TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.1 | ColumnlpDS3TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS3Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.2 | ColumnlpDS3TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.4 | ColumnlpDS3TestStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.10 | ColumnlpDS3TestIndex | not-accessible | mandatory | This variable represents the index for the lpDS3Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.10 | TablelpDS3TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.10.1 | RowlpDS3TestStateEntry | not-accessible | mandatory | An entry in the lpDS3TestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.1 | ColumnlpDS3TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.2 | ColumnlpDS3TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.3 | ColumnlpDS3TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11 | TablelpDS3TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1 | RowlpDS3TestSetupEntry | not-accessible | mandatory | An entry in the lpDS3TestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.1 | ColumnlpDS3TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.2 | ColumnlpDS3TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.3 | ColumnlpDS3TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.4 | ColumnlpDS3TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.5 | ColumnlpDS3TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.6 | ColumnlpDS3TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.7 | ColumnlpDS3TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.8 | ColumnlpDS3TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12 | TablelpDS3TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1 | RowlpDS3TestResultsEntry | not-accessible | mandatory | An entry in the lpDS3TestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.1 | ColumnlpDS3TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.2 | ColumnlpDS3TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.3 | ColumnlpDS3TestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.4 | ColumnlpDS3TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.5 | ColumnlpDS3TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.6 | ColumnlpDS3TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.7 | ColumnlpDS3TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.8 | ColumnlpDS3TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.9 | ColumnlpDS3TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.10 | ColumnlpDS3TestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.11 | ColumnlpDS3TestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3 | NodelpDS3CBit | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.3.1 | TablelpDS3CBitRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3CBit components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1 | RowlpDS3CBitRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3CBit component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.1 | ColumnlpDS3CBitRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS3CBit components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.2 | ColumnlpDS3CBitComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.4 | ColumnlpDS3CBitStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3CBit tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.10 | ColumnlpDS3CBitIndex | not-accessible | mandatory | This variable represents the index for the lpDS3CBit tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.10 | TablelpDS3CBitOperationalTable | not-accessible | mandatory | This group contains the DS3 C-Bit Parity operational data for the CBIT component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.10.1 | RowlpDS3CBitOperationalEntry | not-accessible | mandatory | An entry in the lpDS3CBitOperationalTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.1 | ColumnlpDS3CBitFarEndAlarm | read-only | mandatory | This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.2 | ColumnlpDS3CBitLoopedbackToFarEnd | read-only | mandatory | This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. Th… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.3 | ColumnlpDS3CBitLoopbackAtFarEndRequested | read-only | mandatory | This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request h… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11 | TablelpDS3CBitStatsTable | not-accessible | mandatory | This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases u… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1 | RowlpDS3CBitStatsEntry | not-accessible | mandatory | An entry in the lpDS3CBitStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.1 | ColumnlpDS3CBitCbitErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.2 | ColumnlpDS3CBitCbitCodeViolations | read-only | mandatory | This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and th… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.3 | ColumnlpDS3CBitCbitErroredSec | read-only | mandatory | This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or w… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.4 | ColumnlpDS3CBitCbitSevErroredSec | read-only | mandatory | This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.5 | ColumnlpDS3CBitCbitUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.6 | ColumnlpDS3CBitFarEndErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors. |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.7 | ColumnlpDS3CBitFarEndCodeViolations | read-only | mandatory | This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FE… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.8 | ColumnlpDS3CBitFarEndErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one o… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.9 | ColumnlpDS3CBitFarEndSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs o… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.10 | ColumnlpDS3CBitFarEndSefAisSec | read-only | mandatory | This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS d… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.11 | ColumnlpDS3CBitFarEndUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at th… |
| 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.12 | ColumnlpDS3CBitFarEndFailures | read-only | mandatory | This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negat… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4 | NodelpDS3Plcp | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.4.1 | TablelpDS3PlcpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3Plcp components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1 | RowlpDS3PlcpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3Plcp component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.1 | ColumnlpDS3PlcpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS3Plcp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.2 | ColumnlpDS3PlcpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.4 | ColumnlpDS3PlcpStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3Plcp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.10 | ColumnlpDS3PlcpIndex | not-accessible | mandatory | This variable represents the index for the lpDS3Plcp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.10 | TablelpDS3PlcpOperationalTable | not-accessible | mandatory | This group contains the operational data for the PLCP component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.10.1 | RowlpDS3PlcpOperationalEntry | not-accessible | mandatory | An entry in the lpDS3PlcpOperationalTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.1 | ColumnlpDS3PlcpLofAlarm | read-only | mandatory | This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.2 | ColumnlpDS3PlcpRxRaiAlarm | read-only | mandatory | This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLC… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11 | TablelpDS3PlcpStatsTable | not-accessible | mandatory | This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1 | RowlpDS3PlcpStatsEntry | not-accessible | mandatory | An entry in the lpDS3PlcpStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.1 | ColumnlpDS3PlcpErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.2 | ColumnlpDS3PlcpCodingViolations | read-only | mandatory | This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP fram… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.3 | ColumnlpDS3PlcpErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.4 | ColumnlpDS3PlcpSevErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PL… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.5 | ColumnlpDS3PlcpSevErroredFramingSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out o… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.6 | ColumnlpDS3PlcpUnavailSec | read-only | mandatory | This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP … |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.7 | ColumnlpDS3PlcpFarEndErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors. |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.8 | ColumnlpDS3PlcpFarEndCodingViolations | read-only | mandatory | This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second inter… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.9 | ColumnlpDS3PlcpFarEndErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second i… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.10 | ColumnlpDS3PlcpFarEndSevErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second inter… |
| 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.11 | ColumnlpDS3PlcpFarEndUnavailableSec | read-only | mandatory | This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5 | NodelpDS3Cell | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.5.1 | TablelpDS3CellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3Cell components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1 | RowlpDS3CellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3Cell component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.1 | ColumnlpDS3CellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS3Cell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.2 | ColumnlpDS3CellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.4 | ColumnlpDS3CellStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3Cell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.10 | ColumnlpDS3CellIndex | not-accessible | mandatory | This variable represents the index for the lpDS3Cell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.10 | TablelpDS3CellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.10.1 | RowlpDS3CellProvEntry | not-accessible | mandatory | An entry in the lpDS3CellProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.1 | ColumnlpDS3CellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.2 | ColumnlpDS3CellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.3 | ColumnlpDS3CellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.11 | TablelpDS3CellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.11.1 | RowlpDS3CellOperEntry | not-accessible | mandatory | An entry in the lpDS3CellOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.11.1.1 | ColumnlpDS3CellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.12 | TablelpDS3CellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1 | RowlpDS3CellStatsEntry | not-accessible | mandatory | An entry in the lpDS3CellStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.1 | ColumnlpDS3CellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.2 | ColumnlpDS3CellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.3 | ColumnlpDS3CellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.4 | ColumnlpDS3CellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.5 | ColumnlpDS3CellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6 | NodelpDS3DS1 | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.6.1 | TablelpDS3DS1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3DS1 components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1 | RowlpDS3DS1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3DS1 component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.1 | ColumnlpDS3DS1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS3DS1 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.2 | ColumnlpDS3DS1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.4 | ColumnlpDS3DS1StorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3DS1 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.10 | ColumnlpDS3DS1Index | not-accessible | mandatory | This variable represents the index for the lpDS3DS1 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2 | NodelpDS3DS1Chan | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1 | TablelpDS3DS1ChanRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3DS1Chan components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1 | RowlpDS3DS1ChanRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3DS1Chan component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.1 | ColumnlpDS3DS1ChanRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS3DS1Chan components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.2 | ColumnlpDS3DS1ChanComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.4 | ColumnlpDS3DS1ChanStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3DS1Chan tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.10 | ColumnlpDS3DS1ChanIndex | not-accessible | mandatory | This variable represents the index for the lpDS3DS1Chan tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2 | NodelpDS3DS1ChanTest | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1 | TablelpDS3DS1ChanTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3DS1ChanTest components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1 | RowlpDS3DS1ChanTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3DS1ChanTest component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.1 | ColumnlpDS3DS1ChanTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS3DS1ChanTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.2 | ColumnlpDS3DS1ChanTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.4 | ColumnlpDS3DS1ChanTestStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3DS1ChanTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.10 | ColumnlpDS3DS1ChanTestIndex | not-accessible | mandatory | This variable represents the index for the lpDS3DS1ChanTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10 | TablelpDS3DS1ChanTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1 | RowlpDS3DS1ChanTestStateEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanTestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.1 | ColumnlpDS3DS1ChanTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.2 | ColumnlpDS3DS1ChanTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.3 | ColumnlpDS3DS1ChanTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11 | TablelpDS3DS1ChanTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1 | RowlpDS3DS1ChanTestSetupEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanTestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.1 | ColumnlpDS3DS1ChanTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.2 | ColumnlpDS3DS1ChanTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.3 | ColumnlpDS3DS1ChanTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.4 | ColumnlpDS3DS1ChanTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.5 | ColumnlpDS3DS1ChanTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.6 | ColumnlpDS3DS1ChanTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.7 | ColumnlpDS3DS1ChanTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.8 | ColumnlpDS3DS1ChanTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12 | TablelpDS3DS1ChanTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1 | RowlpDS3DS1ChanTestResultsEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanTestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.1 | ColumnlpDS3DS1ChanTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.2 | ColumnlpDS3DS1ChanTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.3 | ColumnlpDS3DS1ChanTestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.4 | ColumnlpDS3DS1ChanTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.5 | ColumnlpDS3DS1ChanTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.6 | ColumnlpDS3DS1ChanTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.7 | ColumnlpDS3DS1ChanTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.8 | ColumnlpDS3DS1ChanTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.9 | ColumnlpDS3DS1ChanTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.10 | ColumnlpDS3DS1ChanTestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.11 | ColumnlpDS3DS1ChanTestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3 | NodelpDS3DS1ChanCell | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1 | TablelpDS3DS1ChanCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3DS1ChanCell components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1 | RowlpDS3DS1ChanCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3DS1ChanCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.1 | ColumnlpDS3DS1ChanCellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS3DS1ChanCell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.2 | ColumnlpDS3DS1ChanCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.4 | ColumnlpDS3DS1ChanCellStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3DS1ChanCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.10 | ColumnlpDS3DS1ChanCellIndex | not-accessible | mandatory | This variable represents the index for the lpDS3DS1ChanCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10 | TablelpDS3DS1ChanCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1 | RowlpDS3DS1ChanCellProvEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanCellProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.1 | ColumnlpDS3DS1ChanCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.2 | ColumnlpDS3DS1ChanCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.3 | ColumnlpDS3DS1ChanCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11 | TablelpDS3DS1ChanCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1 | RowlpDS3DS1ChanCellOperEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanCellOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1.1 | ColumnlpDS3DS1ChanCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12 | TablelpDS3DS1ChanCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1 | RowlpDS3DS1ChanCellStatsEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanCellStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.1 | ColumnlpDS3DS1ChanCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.2 | ColumnlpDS3DS1ChanCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.3 | ColumnlpDS3DS1ChanCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.4 | ColumnlpDS3DS1ChanCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.5 | ColumnlpDS3DS1ChanCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4 | NodelpDS3DS1ChanTc | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1 | TablelpDS3DS1ChanTcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3DS1ChanTc components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1 | RowlpDS3DS1ChanTcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3DS1ChanTc component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.1 | ColumnlpDS3DS1ChanTcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS3DS1ChanTc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.2 | ColumnlpDS3DS1ChanTcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.4 | ColumnlpDS3DS1ChanTcStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3DS1ChanTc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.10 | ColumnlpDS3DS1ChanTcIndex | not-accessible | mandatory | This variable represents the index for the lpDS3DS1ChanTc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10 | TablelpDS3DS1ChanTcProvTable | not-accessible | mandatory | This group contains all specific provisioning data for a Tc component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1 | RowlpDS3DS1ChanTcProvEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanTcProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.1 | ColumnlpDS3DS1ChanTcReplacementData | read-write | mandatory | This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacemen… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.2 | ColumnlpDS3DS1ChanTcSignalOneDuration | read-write | mandatory | This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11 | TablelpDS3DS1ChanTcOpTable | not-accessible | mandatory | This group contains all specific operational data for a Tc component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1 | RowlpDS3DS1ChanTcOpEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanTcOpTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.1 | ColumnlpDS3DS1ChanTcIngressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.2 | ColumnlpDS3DS1ChanTcEgressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards th… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398 | TablelpDS3DS1ChanTcSigOneTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1 | RowlpDS3DS1ChanTcSigOneEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.1 | ColumnlpDS3DS1ChanTcSigOneIndex | not-accessible | mandatory | This variable represents the lpDS3DS1ChanTcSigOneTable specific index for the lpDS3DS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.2 | ColumnlpDS3DS1ChanTcSigOneValue | read-write | mandatory | This variable represents an individual value for the lpDS3DS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399 | TablelpDS3DS1ChanTcSigTwoTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1 | RowlpDS3DS1ChanTcSigTwoEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.1 | ColumnlpDS3DS1ChanTcSigTwoIndex | not-accessible | mandatory | This variable represents the lpDS3DS1ChanTcSigTwoTable specific index for the lpDS3DS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.2 | ColumnlpDS3DS1ChanTcSigTwoValue | read-write | mandatory | This variable represents an individual value for the lpDS3DS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10 | TablelpDS3DS1ChanProvTable | not-accessible | mandatory | This group contains all of the provisional data for a Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1 | RowlpDS3DS1ChanProvEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.1 | ColumnlpDS3DS1ChanTimeslots | read-write | mandatory | This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 fo… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.2 | ColumnlpDS3DS1ChanTimeslotDataRate | read-write | mandatory | This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardles… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.3 | ColumnlpDS3DS1ChanApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of this hardware component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.11 | TablelpDS3DS1ChanCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1 | RowlpDS3DS1ChanCidDataEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1.1 | ColumnlpDS3DS1ChanCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.12 | TablelpDS3DS1ChanIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1 | RowlpDS3DS1ChanIfEntryEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.1 | ColumnlpDS3DS1ChanIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.2 | ColumnlpDS3DS1ChanIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.13 | TablelpDS3DS1ChanOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1 | RowlpDS3DS1ChanOperStatusEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1.1 | ColumnlpDS3DS1ChanSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14 | TablelpDS3DS1ChanStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1 | RowlpDS3DS1ChanStateEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.1 | ColumnlpDS3DS1ChanAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.2 | ColumnlpDS3DS1ChanOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.3 | ColumnlpDS3DS1ChanUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.4 | ColumnlpDS3DS1ChanAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.5 | ColumnlpDS3DS1ChanProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.6 | ColumnlpDS3DS1ChanControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.7 | ColumnlpDS3DS1ChanAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.8 | ColumnlpDS3DS1ChanStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.9 | ColumnlpDS3DS1ChanUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.15 | TablelpDS3DS1ChanOperTable | not-accessible | mandatory | This group contains all of the operational data for a Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1 | RowlpDS3DS1ChanOperEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1.1 | ColumnlpDS3DS1ChanActualChannelSpeed | read-only | mandatory | This attribute displays the measured link speed of the Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.16 | TablelpDS3DS1ChanAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1 | RowlpDS3DS1ChanAdminInfoEntry | not-accessible | mandatory | An entry in the lpDS3DS1ChanAdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.1 | ColumnlpDS3DS1ChanVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.2 | ColumnlpDS3DS1ChanCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3 | NodelpDS3DS1Test | |||
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1 | TablelpDS3DS1TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS3DS1Test components. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1 | RowlpDS3DS1TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS3DS1Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.1 | ColumnlpDS3DS1TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS3DS1Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.2 | ColumnlpDS3DS1TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.4 | ColumnlpDS3DS1TestStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS3DS1Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.10 | ColumnlpDS3DS1TestIndex | not-accessible | mandatory | This variable represents the index for the lpDS3DS1Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10 | TablelpDS3DS1TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1 | RowlpDS3DS1TestStateEntry | not-accessible | mandatory | An entry in the lpDS3DS1TestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.1 | ColumnlpDS3DS1TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.2 | ColumnlpDS3DS1TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.3 | ColumnlpDS3DS1TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11 | TablelpDS3DS1TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1 | RowlpDS3DS1TestSetupEntry | not-accessible | mandatory | An entry in the lpDS3DS1TestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.1 | ColumnlpDS3DS1TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.2 | ColumnlpDS3DS1TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.3 | ColumnlpDS3DS1TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.4 | ColumnlpDS3DS1TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.5 | ColumnlpDS3DS1TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.6 | ColumnlpDS3DS1TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.7 | ColumnlpDS3DS1TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.8 | ColumnlpDS3DS1TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12 | TablelpDS3DS1TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1 | RowlpDS3DS1TestResultsEntry | not-accessible | mandatory | An entry in the lpDS3DS1TestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.1 | ColumnlpDS3DS1TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.2 | ColumnlpDS3DS1TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.3 | ColumnlpDS3DS1TestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.4 | ColumnlpDS3DS1TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.5 | ColumnlpDS3DS1TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.6 | ColumnlpDS3DS1TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.7 | ColumnlpDS3DS1TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.8 | ColumnlpDS3DS1TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.9 | ColumnlpDS3DS1TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.10 | ColumnlpDS3DS1TestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.11 | ColumnlpDS3DS1TestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.10 | TablelpDS3DS1ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a DS1 component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.10.1 | RowlpDS3DS1ProvEntry | not-accessible | mandatory | An entry in the lpDS3DS1ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.1 | ColumnlpDS3DS1LineType | read-write | mandatory | This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames p… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.2 | ColumnlpDS3DS1ZeroCoding | read-write | mandatory | This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.3 | ColumnlpDS3DS1ClockingSource | read-write | mandatory | This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generat… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.11 | TablelpDS3DS1CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.11.1 | RowlpDS3DS1CidDataEntry | not-accessible | mandatory | An entry in the lpDS3DS1CidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.11.1.1 | ColumnlpDS3DS1CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.12 | TablelpDS3DS1AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.12.1 | RowlpDS3DS1AdminInfoEntry | not-accessible | mandatory | An entry in the lpDS3DS1AdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.1 | ColumnlpDS3DS1Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.2 | ColumnlpDS3DS1CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.13 | TablelpDS3DS1IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.13.1 | RowlpDS3DS1IfEntryEntry | not-accessible | mandatory | An entry in the lpDS3DS1IfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.1 | ColumnlpDS3DS1IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.2 | ColumnlpDS3DS1IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.14 | TablelpDS3DS1OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.14.1 | RowlpDS3DS1OperStatusEntry | not-accessible | mandatory | An entry in the lpDS3DS1OperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.14.1.1 | ColumnlpDS3DS1SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15 | TablelpDS3DS1StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1 | RowlpDS3DS1StateEntry | not-accessible | mandatory | An entry in the lpDS3DS1StateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.1 | ColumnlpDS3DS1AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.2 | ColumnlpDS3DS1OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.3 | ColumnlpDS3DS1UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.4 | ColumnlpDS3DS1AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.5 | ColumnlpDS3DS1ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.6 | ColumnlpDS3DS1ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.7 | ColumnlpDS3DS1AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.8 | ColumnlpDS3DS1StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.9 | ColumnlpDS3DS1UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16 | TablelpDS3DS1OperTable | not-accessible | mandatory | This group contains the common operational data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1 | RowlpDS3DS1OperEntry | not-accessible | mandatory | An entry in the lpDS3DS1OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.1 | ColumnlpDS3DS1RxAisAlarm | read-only | mandatory | This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.2 | ColumnlpDS3DS1LofAlarm | read-only | mandatory | This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits i… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.3 | ColumnlpDS3DS1RxRaiAlarm | read-only | mandatory | This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.4 | ColumnlpDS3DS1TxAisAlarm | read-only | mandatory | This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.5 | ColumnlpDS3DS1TxRaiAlarm | read-only | mandatory | This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm conditio… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17 | TablelpDS3DS1StatsTable | not-accessible | mandatory | This group contains the common statistical data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1 | RowlpDS3DS1StatsEntry | not-accessible | mandatory | An entry in the lpDS3DS1StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.1 | ColumnlpDS3DS1RunningTime | read-only | mandatory | This attribute counts the number of seconds since the tributary was activated. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.2 | ColumnlpDS3DS1ErrorFreeSec | read-only | mandatory | This attribute counts the number of seconds that the tributary has been in an error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.3 | ColumnlpDS3DS1ErroredSec | read-only | mandatory | This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or m… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.4 | ColumnlpDS3DS1SevErroredSec | read-only | mandatory | This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second w… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.5 | ColumnlpDS3DS1SevErroredFrmSec | read-only | mandatory | This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs … |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.6 | ColumnlpDS3DS1UnavailSec | read-only | mandatory | This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset o… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.7 | ColumnlpDS3DS1CrcErrors | read-only | mandatory | This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.8 | ColumnlpDS3DS1FrmErrors | read-only | mandatory | This attribute counts the total number of frame errors. A frame error is an error in the framing bits. |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.9 | ColumnlpDS3DS1SlipErrors | read-only | mandatory | The total number of times that the line experienced a controlled frame slip. |
| 1.3.6.1.4.1.562.2.4.1.12.5.10 | TablelpDS3ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a DS3 component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.10.1 | RowlpDS3ProvEntry | not-accessible | mandatory | An entry in the lpDS3ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.10.1.1 | ColumnlpDS3CbitParity | read-write | mandatory | This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set… |
| 1.3.6.1.4.1.562.2.4.1.12.5.10.1.2 | ColumnlpDS3LineLength | read-write | mandatory | This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There a… |
| 1.3.6.1.4.1.562.2.4.1.12.5.10.1.3 | ColumnlpDS3ClockingSource | read-write | mandatory | This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its c… |
| 1.3.6.1.4.1.562.2.4.1.12.5.10.1.4 | ColumnlpDS3ApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.10.1.5 | ColumnlpDS3Mapping | read-write | mandatory | This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under … |
| 1.3.6.1.4.1.562.2.4.1.12.5.11 | TablelpDS3CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.5.11.1 | RowlpDS3CidDataEntry | not-accessible | mandatory | An entry in the lpDS3CidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.11.1.1 | ColumnlpDS3CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.5.12 | TablelpDS3AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.5.12.1 | RowlpDS3AdminInfoEntry | not-accessible | mandatory | An entry in the lpDS3AdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.12.1.1 | ColumnlpDS3Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.5.12.1.2 | ColumnlpDS3CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.5.13 | TablelpDS3IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.5.13.1 | RowlpDS3IfEntryEntry | not-accessible | mandatory | An entry in the lpDS3IfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.13.1.1 | ColumnlpDS3IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.5.13.1.2 | ColumnlpDS3IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.5.14 | TablelpDS3OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.14.1 | RowlpDS3OperStatusEntry | not-accessible | mandatory | An entry in the lpDS3OperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.14.1.1 | ColumnlpDS3SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15 | TablelpDS3StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1 | RowlpDS3StateEntry | not-accessible | mandatory | An entry in the lpDS3StateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.1 | ColumnlpDS3AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.2 | ColumnlpDS3OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.3 | ColumnlpDS3UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.4 | ColumnlpDS3AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.5 | ColumnlpDS3ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.6 | ColumnlpDS3ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.7 | ColumnlpDS3AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.8 | ColumnlpDS3StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.5.15.1.9 | ColumnlpDS3UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.5.16 | TablelpDS3OperTable | not-accessible | mandatory | This group contains the common operational data for DS3 component. |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1 | RowlpDS3OperEntry | not-accessible | mandatory | An entry in the lpDS3OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1.1 | ColumnlpDS3LosAlarm | read-only | mandatory | This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accu… |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1.2 | ColumnlpDS3LofAlarm | read-only | mandatory | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects hav… |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1.3 | ColumnlpDS3RxAisAlarm | read-only | mandatory | This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observe… |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1.4 | ColumnlpDS3RxRaiAlarm | read-only | mandatory | This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is en… |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1.5 | ColumnlpDS3RxIdle | read-only | mandatory | This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been obse… |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1.6 | ColumnlpDS3TxAis | read-only | mandatory | This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport … |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1.7 | ColumnlpDS3TxRai | read-only | mandatory | When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 com… |
| 1.3.6.1.4.1.562.2.4.1.12.5.16.1.8 | ColumnlpDS3TxIdle | read-only | mandatory | This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17 | TablelpDS3StatsTable | not-accessible | mandatory | This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases u… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1 | RowlpDS3StatsEntry | not-accessible | mandatory | An entry in the lpDS3StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.1 | ColumnlpDS3RunningTime | read-only | mandatory | This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.2 | ColumnlpDS3ErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the DS3 port has been in an error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.3 | ColumnlpDS3LineCodeViolations | read-only | mandatory | This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for seco… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.4 | ColumnlpDS3LineErroredSec | read-only | mandatory | This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more L… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.5 | ColumnlpDS3LineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing mo… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.6 | ColumnlpDS3LineLosSec | read-only | mandatory | This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.7 | ColumnlpDS3LineFailures | read-only | mandatory | This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotoni… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.8 | ColumnlpDS3PathCodeViolations | read-only | mandatory | This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.9 | ColumnlpDS3PathErroredSec | read-only | mandatory | This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.10 | ColumnlpDS3PathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.11 | ColumnlpDS3PathSefAisSec | read-only | mandatory | This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SE… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.12 | ColumnlpDS3PathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.2.4.1.12.5.17.1.13 | ColumnlpDS3PathFailures | read-only | mandatory | This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which mono… |
| 1.3.6.1.4.1.562.2.4.1.12.6 | NodelpE3 | |||
| 1.3.6.1.4.1.562.2.4.1.12.6.1 | TablelpE3RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE3 components. |
| 1.3.6.1.4.1.562.2.4.1.12.6.1.1 | RowlpE3RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE3 component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.1.1.1 | ColumnlpE3RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpE3 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.6.1.1.2 | ColumnlpE3ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.6.1.1.4 | ColumnlpE3StorageType | read-only | mandatory | This variable represents the storage type value for the lpE3 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.1.1.10 | ColumnlpE3Index | not-accessible | mandatory | This variable represents the index for the lpE3 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2 | NodelpE3Test | |||
| 1.3.6.1.4.1.562.2.4.1.12.6.2.1 | TablelpE3TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE3Test components. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1 | RowlpE3TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE3Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.1 | ColumnlpE3TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpE3Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.2 | ColumnlpE3TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.4 | ColumnlpE3TestStorageType | read-only | mandatory | This variable represents the storage type value for the lpE3Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.10 | ColumnlpE3TestIndex | not-accessible | mandatory | This variable represents the index for the lpE3Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.10 | TablelpE3TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.10.1 | RowlpE3TestStateEntry | not-accessible | mandatory | An entry in the lpE3TestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.1 | ColumnlpE3TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.2 | ColumnlpE3TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.3 | ColumnlpE3TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11 | TablelpE3TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1 | RowlpE3TestSetupEntry | not-accessible | mandatory | An entry in the lpE3TestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.1 | ColumnlpE3TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.2 | ColumnlpE3TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.3 | ColumnlpE3TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.4 | ColumnlpE3TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.5 | ColumnlpE3TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.6 | ColumnlpE3TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.7 | ColumnlpE3TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.8 | ColumnlpE3TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12 | TablelpE3TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1 | RowlpE3TestResultsEntry | not-accessible | mandatory | An entry in the lpE3TestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.1 | ColumnlpE3TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.2 | ColumnlpE3TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.3 | ColumnlpE3TestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.4 | ColumnlpE3TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.5 | ColumnlpE3TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.6 | ColumnlpE3TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.7 | ColumnlpE3TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.8 | ColumnlpE3TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.9 | ColumnlpE3TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.10 | ColumnlpE3TestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.11 | ColumnlpE3TestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3 | NodelpE3G832 | |||
| 1.3.6.1.4.1.562.2.4.1.12.6.3.1 | TablelpE3G832RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE3G832 components. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1 | RowlpE3G832RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE3G832 component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.1 | ColumnlpE3G832RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpE3G832 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.2 | ColumnlpE3G832ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.4 | ColumnlpE3G832StorageType | read-only | mandatory | This variable represents the storage type value for the lpE3G832 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.10 | ColumnlpE3G832Index | not-accessible | mandatory | This variable represents the index for the lpE3G832 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.10 | TablelpE3G832ProvisionedTable | not-accessible | mandatory | This group contains the provisionable data for the G832 component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.10.1 | RowlpE3G832ProvisionedEntry | not-accessible | mandatory | An entry in the lpE3G832ProvisionedTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.1 | ColumnlpE3G832TrailTraceTransmitted | read-write | mandatory | This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field o… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.2 | ColumnlpE3G832TrailTraceExpected | read-write | mandatory | This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.11 | TablelpE3G832OperationalTable | not-accessible | mandatory | This group contains the operational data for the G832 component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1 | RowlpE3G832OperationalEntry | not-accessible | mandatory | An entry in the lpE3G832OperationalTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.1 | ColumnlpE3G832UnexpectedPayloadType | read-only | mandatory | This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.2 | ColumnlpE3G832TrailTraceMismatch | read-only | mandatory | This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.3 | ColumnlpE3G832TimingMarker | read-only | mandatory | Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timi… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.4 | ColumnlpE3G832TrailTraceReceived | read-only | mandatory | This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute diff… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.12 | TablelpE3G832StatsTable | not-accessible | mandatory | This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1 | RowlpE3G832StatsEntry | not-accessible | mandatory | An entry in the lpE3G832StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.1 | ColumnlpE3G832FarEndErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors. |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.2 | ColumnlpE3G832FarEndCodeViolations | read-only | mandatory | A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a re… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.3 | ColumnlpE3G832FarEndErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.4 | ColumnlpE3G832FarEndSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-En… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.5 | ColumnlpE3G832FarEndSefAisSec | read-only | mandatory | This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive F… |
| 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.6 | ColumnlpE3G832FarEndUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the … |
| 1.3.6.1.4.1.562.2.4.1.12.6.4 | NodelpE3Plcp | |||
| 1.3.6.1.4.1.562.2.4.1.12.6.4.1 | TablelpE3PlcpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE3Plcp components. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1 | RowlpE3PlcpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE3Plcp component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.1 | ColumnlpE3PlcpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpE3Plcp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.2 | ColumnlpE3PlcpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.4 | ColumnlpE3PlcpStorageType | read-only | mandatory | This variable represents the storage type value for the lpE3Plcp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.10 | ColumnlpE3PlcpIndex | not-accessible | mandatory | This variable represents the index for the lpE3Plcp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.10 | TablelpE3PlcpOperationalTable | not-accessible | mandatory | This group contains the operational data for the PLCP component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.10.1 | RowlpE3PlcpOperationalEntry | not-accessible | mandatory | An entry in the lpE3PlcpOperationalTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.1 | ColumnlpE3PlcpLofAlarm | read-only | mandatory | This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.2 | ColumnlpE3PlcpRxRaiAlarm | read-only | mandatory | This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLC… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11 | TablelpE3PlcpStatsTable | not-accessible | mandatory | This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1 | RowlpE3PlcpStatsEntry | not-accessible | mandatory | An entry in the lpE3PlcpStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.1 | ColumnlpE3PlcpErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.2 | ColumnlpE3PlcpCodingViolations | read-only | mandatory | This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP fram… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.3 | ColumnlpE3PlcpErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.4 | ColumnlpE3PlcpSevErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PL… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.5 | ColumnlpE3PlcpSevErroredFramingSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out o… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.6 | ColumnlpE3PlcpUnavailSec | read-only | mandatory | This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP … |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.7 | ColumnlpE3PlcpFarEndErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors. |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.8 | ColumnlpE3PlcpFarEndCodingViolations | read-only | mandatory | This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second inter… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.9 | ColumnlpE3PlcpFarEndErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second i… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.10 | ColumnlpE3PlcpFarEndSevErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second inter… |
| 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.11 | ColumnlpE3PlcpFarEndUnavailableSec | read-only | mandatory | This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5 | NodelpE3Cell | |||
| 1.3.6.1.4.1.562.2.4.1.12.6.5.1 | TablelpE3CellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE3Cell components. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1 | RowlpE3CellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE3Cell component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.1 | ColumnlpE3CellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpE3Cell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.2 | ColumnlpE3CellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.4 | ColumnlpE3CellStorageType | read-only | mandatory | This variable represents the storage type value for the lpE3Cell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.10 | ColumnlpE3CellIndex | not-accessible | mandatory | This variable represents the index for the lpE3Cell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.10 | TablelpE3CellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.10.1 | RowlpE3CellProvEntry | not-accessible | mandatory | An entry in the lpE3CellProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.1 | ColumnlpE3CellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.2 | ColumnlpE3CellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.3 | ColumnlpE3CellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.11 | TablelpE3CellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.11.1 | RowlpE3CellOperEntry | not-accessible | mandatory | An entry in the lpE3CellOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.11.1.1 | ColumnlpE3CellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.12 | TablelpE3CellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1 | RowlpE3CellStatsEntry | not-accessible | mandatory | An entry in the lpE3CellStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.1 | ColumnlpE3CellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.2 | ColumnlpE3CellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.3 | ColumnlpE3CellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.4 | ColumnlpE3CellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.5 | ColumnlpE3CellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.2.4.1.12.6.10 | TablelpE3ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a E3 component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.10.1 | RowlpE3ProvEntry | not-accessible | mandatory | An entry in the lpE3ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.10.1.1 | ColumnlpE3LineLength | read-write | mandatory | This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet). |
| 1.3.6.1.4.1.562.2.4.1.12.6.10.1.2 | ColumnlpE3ClockingSource | read-write | mandatory | This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its ce… |
| 1.3.6.1.4.1.562.2.4.1.12.6.10.1.3 | ColumnlpE3ApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the E3 component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.10.1.4 | ColumnlpE3Mapping | read-write | mandatory | This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under t… |
| 1.3.6.1.4.1.562.2.4.1.12.6.10.1.5 | ColumnlpE3Framing | read-write | mandatory | This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 com… |
| 1.3.6.1.4.1.562.2.4.1.12.6.10.1.6 | ColumnlpE3LinkAlarmActivationThreshold | read-write | mandatory | This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards. |
| 1.3.6.1.4.1.562.2.4.1.12.6.10.1.7 | ColumnlpE3LinkAlarmScanInterval | read-write | mandatory | This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error inter… |
| 1.3.6.1.4.1.562.2.4.1.12.6.11 | TablelpE3CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.6.11.1 | RowlpE3CidDataEntry | not-accessible | mandatory | An entry in the lpE3CidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.11.1.1 | ColumnlpE3CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.6.12 | TablelpE3AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.6.12.1 | RowlpE3AdminInfoEntry | not-accessible | mandatory | An entry in the lpE3AdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.12.1.1 | ColumnlpE3Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.6.12.1.2 | ColumnlpE3CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.6.13 | TablelpE3IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.6.13.1 | RowlpE3IfEntryEntry | not-accessible | mandatory | An entry in the lpE3IfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.13.1.1 | ColumnlpE3IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.6.13.1.2 | ColumnlpE3IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.6.14 | TablelpE3OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.14.1 | RowlpE3OperStatusEntry | not-accessible | mandatory | An entry in the lpE3OperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.14.1.1 | ColumnlpE3SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15 | TablelpE3StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1 | RowlpE3StateEntry | not-accessible | mandatory | An entry in the lpE3StateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.1 | ColumnlpE3AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.2 | ColumnlpE3OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.3 | ColumnlpE3UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.4 | ColumnlpE3AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.5 | ColumnlpE3ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.6 | ColumnlpE3ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.7 | ColumnlpE3AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.8 | ColumnlpE3StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.6.15.1.9 | ColumnlpE3UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.6.16 | TablelpE3OperTable | not-accessible | mandatory | This group contains the common operational data for E3 component. |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1 | RowlpE3OperEntry | not-accessible | mandatory | An entry in the lpE3OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.1 | ColumnlpE3LosAlarm | read-only | mandatory | This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accum… |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.2 | ColumnlpE3LofAlarm | read-only | mandatory | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects hav… |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.3 | ColumnlpE3RxAisAlarm | read-only | mandatory | This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been ob… |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.4 | ColumnlpE3RxRaiAlarm | read-only | mandatory | This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Fa… |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.5 | ColumnlpE3TxAis | read-only | mandatory | This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and n… |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.6 | ColumnlpE3TxRai | read-only | mandatory | This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in o… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17 | TablelpE3StatsTable | not-accessible | mandatory | This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches … |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1 | RowlpE3StatsEntry | not-accessible | mandatory | An entry in the lpE3StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.1 | ColumnlpE3RunningTime | read-only | mandatory | This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All … |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.2 | ColumnlpE3ErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the E3 port has been in an error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.3 | ColumnlpE3LineCodeViolations | read-only | mandatory | This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhi… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.4 | ColumnlpE3LineErroredSec | read-only | mandatory | This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more L… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.5 | ColumnlpE3LineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing mo… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.6 | ColumnlpE3LineLosSec | read-only | mandatory | This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Los… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.7 | ColumnlpE3LineFailures | read-only | mandatory | This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotoni… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.8 | ColumnlpE3PathCodeViolations | read-only | mandatory | This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framin… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.9 | ColumnlpE3PathErroredSec | read-only | mandatory | This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more P… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.10 | ColumnlpE3PathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing mo… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.11 | ColumnlpE3PathSefAisSec | read-only | mandatory | This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.12 | ColumnlpE3PathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 cons… |
| 1.3.6.1.4.1.562.2.4.1.12.6.17.1.13 | ColumnlpE3PathFailures | read-only | mandatory | This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which mono… |
| 1.3.6.1.4.1.562.2.4.1.12.7 | NodelpDS1 | |||
| 1.3.6.1.4.1.562.2.4.1.12.7.1 | TablelpDS1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS1 components. |
| 1.3.6.1.4.1.562.2.4.1.12.7.1.1 | RowlpDS1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS1 component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.1.1.1 | ColumnlpDS1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS1 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.7.1.1.2 | ColumnlpDS1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.7.1.1.4 | ColumnlpDS1StorageType | read-only | mandatory | This variable represents the storage type value for the lpDS1 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.1.1.10 | ColumnlpDS1Index | not-accessible | mandatory | This variable represents the index for the lpDS1 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2 | NodelpDS1Chan | |||
| 1.3.6.1.4.1.562.2.4.1.12.7.2.1 | TablelpDS1ChanRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS1Chan components. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1 | RowlpDS1ChanRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS1Chan component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.1 | ColumnlpDS1ChanRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS1Chan components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.2 | ColumnlpDS1ChanComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.4 | ColumnlpDS1ChanStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS1Chan tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.10 | ColumnlpDS1ChanIndex | not-accessible | mandatory | This variable represents the index for the lpDS1Chan tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2 | NodelpDS1ChanTest | |||
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1 | TablelpDS1ChanTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS1ChanTest components. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1 | RowlpDS1ChanTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS1ChanTest component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.1 | ColumnlpDS1ChanTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS1ChanTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.2 | ColumnlpDS1ChanTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.4 | ColumnlpDS1ChanTestStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS1ChanTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.10 | ColumnlpDS1ChanTestIndex | not-accessible | mandatory | This variable represents the index for the lpDS1ChanTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10 | TablelpDS1ChanTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1 | RowlpDS1ChanTestStateEntry | not-accessible | mandatory | An entry in the lpDS1ChanTestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.1 | ColumnlpDS1ChanTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.2 | ColumnlpDS1ChanTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.3 | ColumnlpDS1ChanTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11 | TablelpDS1ChanTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1 | RowlpDS1ChanTestSetupEntry | not-accessible | mandatory | An entry in the lpDS1ChanTestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.1 | ColumnlpDS1ChanTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.2 | ColumnlpDS1ChanTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.3 | ColumnlpDS1ChanTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.4 | ColumnlpDS1ChanTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.5 | ColumnlpDS1ChanTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.6 | ColumnlpDS1ChanTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.7 | ColumnlpDS1ChanTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.8 | ColumnlpDS1ChanTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12 | TablelpDS1ChanTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1 | RowlpDS1ChanTestResultsEntry | not-accessible | mandatory | An entry in the lpDS1ChanTestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.1 | ColumnlpDS1ChanTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.2 | ColumnlpDS1ChanTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.3 | ColumnlpDS1ChanTestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.4 | ColumnlpDS1ChanTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.5 | ColumnlpDS1ChanTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.6 | ColumnlpDS1ChanTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.7 | ColumnlpDS1ChanTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.8 | ColumnlpDS1ChanTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.9 | ColumnlpDS1ChanTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.10 | ColumnlpDS1ChanTestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.11 | ColumnlpDS1ChanTestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3 | NodelpDS1ChanCell | |||
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1 | TablelpDS1ChanCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS1ChanCell components. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1 | RowlpDS1ChanCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS1ChanCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.1 | ColumnlpDS1ChanCellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS1ChanCell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.2 | ColumnlpDS1ChanCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.4 | ColumnlpDS1ChanCellStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS1ChanCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.10 | ColumnlpDS1ChanCellIndex | not-accessible | mandatory | This variable represents the index for the lpDS1ChanCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10 | TablelpDS1ChanCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1 | RowlpDS1ChanCellProvEntry | not-accessible | mandatory | An entry in the lpDS1ChanCellProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.1 | ColumnlpDS1ChanCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.2 | ColumnlpDS1ChanCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.3 | ColumnlpDS1ChanCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.11 | TablelpDS1ChanCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1 | RowlpDS1ChanCellOperEntry | not-accessible | mandatory | An entry in the lpDS1ChanCellOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1.1 | ColumnlpDS1ChanCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12 | TablelpDS1ChanCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1 | RowlpDS1ChanCellStatsEntry | not-accessible | mandatory | An entry in the lpDS1ChanCellStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.1 | ColumnlpDS1ChanCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.2 | ColumnlpDS1ChanCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.3 | ColumnlpDS1ChanCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.4 | ColumnlpDS1ChanCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.5 | ColumnlpDS1ChanCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4 | NodelpDS1ChanTc | |||
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1 | TablelpDS1ChanTcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS1ChanTc components. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1 | RowlpDS1ChanTcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS1ChanTc component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.1 | ColumnlpDS1ChanTcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpDS1ChanTc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.2 | ColumnlpDS1ChanTcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.4 | ColumnlpDS1ChanTcStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS1ChanTc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.10 | ColumnlpDS1ChanTcIndex | not-accessible | mandatory | This variable represents the index for the lpDS1ChanTc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.10 | TablelpDS1ChanTcProvTable | not-accessible | mandatory | This group contains all specific provisioning data for a Tc component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1 | RowlpDS1ChanTcProvEntry | not-accessible | mandatory | An entry in the lpDS1ChanTcProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.1 | ColumnlpDS1ChanTcReplacementData | read-write | mandatory | This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacemen… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.2 | ColumnlpDS1ChanTcSignalOneDuration | read-write | mandatory | This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.11 | TablelpDS1ChanTcOpTable | not-accessible | mandatory | This group contains all specific operational data for a Tc component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1 | RowlpDS1ChanTcOpEntry | not-accessible | mandatory | An entry in the lpDS1ChanTcOpTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.1 | ColumnlpDS1ChanTcIngressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.2 | ColumnlpDS1ChanTcEgressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards th… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.398 | TablelpDS1ChanTcSigOneTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1 | RowlpDS1ChanTcSigOneEntry | not-accessible | mandatory | An entry in the lpDS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.1 | ColumnlpDS1ChanTcSigOneIndex | not-accessible | mandatory | This variable represents the lpDS1ChanTcSigOneTable specific index for the lpDS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.2 | ColumnlpDS1ChanTcSigOneValue | read-write | mandatory | This variable represents an individual value for the lpDS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.399 | TablelpDS1ChanTcSigTwoTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1 | RowlpDS1ChanTcSigTwoEntry | not-accessible | mandatory | An entry in the lpDS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.1 | ColumnlpDS1ChanTcSigTwoIndex | not-accessible | mandatory | This variable represents the lpDS1ChanTcSigTwoTable specific index for the lpDS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.2 | ColumnlpDS1ChanTcSigTwoValue | read-write | mandatory | This variable represents an individual value for the lpDS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.10 | TablelpDS1ChanProvTable | not-accessible | mandatory | This group contains all of the provisional data for a Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.10.1 | RowlpDS1ChanProvEntry | not-accessible | mandatory | An entry in the lpDS1ChanProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.1 | ColumnlpDS1ChanTimeslots | read-write | mandatory | This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 fo… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.2 | ColumnlpDS1ChanTimeslotDataRate | read-write | mandatory | This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardles… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.3 | ColumnlpDS1ChanApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of this hardware component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.11 | TablelpDS1ChanCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.11.1 | RowlpDS1ChanCidDataEntry | not-accessible | mandatory | An entry in the lpDS1ChanCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.11.1.1 | ColumnlpDS1ChanCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.12 | TablelpDS1ChanIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.12.1 | RowlpDS1ChanIfEntryEntry | not-accessible | mandatory | An entry in the lpDS1ChanIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.1 | ColumnlpDS1ChanIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.2 | ColumnlpDS1ChanIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.13 | TablelpDS1ChanOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.13.1 | RowlpDS1ChanOperStatusEntry | not-accessible | mandatory | An entry in the lpDS1ChanOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.13.1.1 | ColumnlpDS1ChanSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14 | TablelpDS1ChanStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1 | RowlpDS1ChanStateEntry | not-accessible | mandatory | An entry in the lpDS1ChanStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.1 | ColumnlpDS1ChanAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.2 | ColumnlpDS1ChanOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.3 | ColumnlpDS1ChanUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.4 | ColumnlpDS1ChanAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.5 | ColumnlpDS1ChanProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.6 | ColumnlpDS1ChanControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.7 | ColumnlpDS1ChanAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.8 | ColumnlpDS1ChanStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.9 | ColumnlpDS1ChanUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.15 | TablelpDS1ChanOperTable | not-accessible | mandatory | This group contains all of the operational data for a Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.15.1 | RowlpDS1ChanOperEntry | not-accessible | mandatory | An entry in the lpDS1ChanOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.15.1.1 | ColumnlpDS1ChanActualChannelSpeed | read-only | mandatory | This attribute displays the measured link speed of the Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.16 | TablelpDS1ChanAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.16.1 | RowlpDS1ChanAdminInfoEntry | not-accessible | mandatory | An entry in the lpDS1ChanAdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.1 | ColumnlpDS1ChanVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.2 | ColumnlpDS1ChanCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3 | NodelpDS1Test | |||
| 1.3.6.1.4.1.562.2.4.1.12.7.3.1 | TablelpDS1TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS1Test components. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1 | RowlpDS1TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS1Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.1 | ColumnlpDS1TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS1Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.2 | ColumnlpDS1TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.4 | ColumnlpDS1TestStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS1Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.10 | ColumnlpDS1TestIndex | not-accessible | mandatory | This variable represents the index for the lpDS1Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.10 | TablelpDS1TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.10.1 | RowlpDS1TestStateEntry | not-accessible | mandatory | An entry in the lpDS1TestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.1 | ColumnlpDS1TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.2 | ColumnlpDS1TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.3 | ColumnlpDS1TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11 | TablelpDS1TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1 | RowlpDS1TestSetupEntry | not-accessible | mandatory | An entry in the lpDS1TestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.1 | ColumnlpDS1TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.2 | ColumnlpDS1TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.3 | ColumnlpDS1TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.4 | ColumnlpDS1TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.5 | ColumnlpDS1TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.6 | ColumnlpDS1TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.7 | ColumnlpDS1TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.8 | ColumnlpDS1TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12 | TablelpDS1TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1 | RowlpDS1TestResultsEntry | not-accessible | mandatory | An entry in the lpDS1TestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.1 | ColumnlpDS1TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.2 | ColumnlpDS1TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.3 | ColumnlpDS1TestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.4 | ColumnlpDS1TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.5 | ColumnlpDS1TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.6 | ColumnlpDS1TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.7 | ColumnlpDS1TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.8 | ColumnlpDS1TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.9 | ColumnlpDS1TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.10 | ColumnlpDS1TestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.11 | ColumnlpDS1TestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.7.4 | NodelpDS1Dsp | |||
| 1.3.6.1.4.1.562.2.4.1.12.7.4.1 | TablelpDS1DspRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS1Dsp components. |
| 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1 | RowlpDS1DspRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS1Dsp component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.1 | ColumnlpDS1DspRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS1Dsp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.2 | ColumnlpDS1DspComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.4 | ColumnlpDS1DspStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS1Dsp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.10 | ColumnlpDS1DspIndex | not-accessible | mandatory | This variable represents the index for the lpDS1Dsp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.5 | NodelpDS1Audio | |||
| 1.3.6.1.4.1.562.2.4.1.12.7.5.1 | TablelpDS1AudioRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpDS1Audio components. |
| 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1 | RowlpDS1AudioRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpDS1Audio component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.1 | ColumnlpDS1AudioRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpDS1Audio components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.2 | ColumnlpDS1AudioComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.4 | ColumnlpDS1AudioStorageType | read-only | mandatory | This variable represents the storage type value for the lpDS1Audio tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.10 | ColumnlpDS1AudioIndex | not-accessible | mandatory | This variable represents the index for the lpDS1Audio tables. |
| 1.3.6.1.4.1.562.2.4.1.12.7.10 | TablelpDS1ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a DS1 component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1 | RowlpDS1ProvEntry | not-accessible | mandatory | An entry in the lpDS1ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.1 | ColumnlpDS1LineType | read-write | mandatory | This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per mu… |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.2 | ColumnlpDS1ZeroCoding | read-write | mandatory | This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the avai… |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.3 | ColumnlpDS1ClockingSource | read-write | mandatory | This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. … |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.4 | ColumnlpDS1RaiAlarmType | read-write | mandatory | This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit… |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.5 | ColumnlpDS1LineLength | read-write | mandatory | This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual … |
| 1.3.6.1.4.1.562.2.4.1.12.7.11 | TablelpDS1CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.7.11.1 | RowlpDS1CidDataEntry | not-accessible | mandatory | An entry in the lpDS1CidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.11.1.1 | ColumnlpDS1CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.7.12 | TablelpDS1AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.7.12.1 | RowlpDS1AdminInfoEntry | not-accessible | mandatory | An entry in the lpDS1AdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.12.1.1 | ColumnlpDS1Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.7.12.1.2 | ColumnlpDS1CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.7.13 | TablelpDS1IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.7.13.1 | RowlpDS1IfEntryEntry | not-accessible | mandatory | An entry in the lpDS1IfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.13.1.1 | ColumnlpDS1IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.7.13.1.2 | ColumnlpDS1IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.7.14 | TablelpDS1OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.7.14.1 | RowlpDS1OperStatusEntry | not-accessible | mandatory | An entry in the lpDS1OperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.14.1.1 | ColumnlpDS1SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15 | TablelpDS1StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1 | RowlpDS1StateEntry | not-accessible | mandatory | An entry in the lpDS1StateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.1 | ColumnlpDS1AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.2 | ColumnlpDS1OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.3 | ColumnlpDS1UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.4 | ColumnlpDS1AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.5 | ColumnlpDS1ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.6 | ColumnlpDS1ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.7 | ColumnlpDS1AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.8 | ColumnlpDS1StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.7.15.1.9 | ColumnlpDS1UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.7.16 | TablelpDS1OperTable | not-accessible | mandatory | This group contains the common operational data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1 | RowlpDS1OperEntry | not-accessible | mandatory | An entry in the lpDS1OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.1 | ColumnlpDS1LosAlarm | read-only | mandatory | This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulat… |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.2 | ColumnlpDS1RxAisAlarm | read-only | mandatory | This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observ… |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.3 | ColumnlpDS1LofAlarm | read-only | mandatory | This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framin… |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.4 | ColumnlpDS1RxRaiAlarm | read-only | mandatory | This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has … |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.5 | ColumnlpDS1TxAisAlarm | read-only | mandatory | This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a lock… |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.6 | ColumnlpDS1TxRaiAlarm | read-only | mandatory | This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for… |
| 1.3.6.1.4.1.562.2.4.1.12.7.17 | TablelpDS1StatsTable | not-accessible | mandatory | This group contains the common statistical data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1 | RowlpDS1StatsEntry | not-accessible | mandatory | An entry in the lpDS1StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.1 | ColumnlpDS1RunningTime | read-only | mandatory | The number of seconds since the port component was activated. |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.2 | ColumnlpDS1ErrorFreeSec | read-only | mandatory | The number of seconds that the port has been in an error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.3 | ColumnlpDS1ErroredSec | read-only | mandatory | An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may… |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.4 | ColumnlpDS1SevErroredSec | read-only | mandatory | A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs. |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.5 | ColumnlpDS1SevErroredFrmSec | read-only | mandatory | A severely errored framing second occurs when a second with one or more Out Of Frame events occurs. |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.6 | ColumnlpDS1UnavailSec | read-only | mandatory | The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Er… |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.7 | ColumnlpDS1BpvErrors | read-only | mandatory | The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.8 | ColumnlpDS1CrcErrors | read-only | mandatory | If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, i… |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.9 | ColumnlpDS1FrmErrors | read-only | mandatory | The current count of frame errors. A frame error is an error in the framing bits |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.10 | ColumnlpDS1LosStateChanges | read-only | mandatory | The total number of times that the line lost signal. |
| 1.3.6.1.4.1.562.2.4.1.12.7.17.1.11 | ColumnlpDS1SlipErrors | read-only | mandatory | The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V… |
| 1.3.6.1.4.1.562.2.4.1.12.8 | NodelpE1 | |||
| 1.3.6.1.4.1.562.2.4.1.12.8.1 | TablelpE1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE1 components. |
| 1.3.6.1.4.1.562.2.4.1.12.8.1.1 | RowlpE1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE1 component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.1.1.1 | ColumnlpE1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpE1 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.8.1.1.2 | ColumnlpE1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.8.1.1.4 | ColumnlpE1StorageType | read-only | mandatory | This variable represents the storage type value for the lpE1 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.1.1.10 | ColumnlpE1Index | not-accessible | mandatory | This variable represents the index for the lpE1 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2 | NodelpE1Chan | |||
| 1.3.6.1.4.1.562.2.4.1.12.8.2.1 | TablelpE1ChanRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE1Chan components. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1 | RowlpE1ChanRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE1Chan component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.1 | ColumnlpE1ChanRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpE1Chan components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.2 | ColumnlpE1ChanComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.4 | ColumnlpE1ChanStorageType | read-only | mandatory | This variable represents the storage type value for the lpE1Chan tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.10 | ColumnlpE1ChanIndex | not-accessible | mandatory | This variable represents the index for the lpE1Chan tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2 | NodelpE1ChanTest | |||
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1 | TablelpE1ChanTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE1ChanTest components. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1 | RowlpE1ChanTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE1ChanTest component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.1 | ColumnlpE1ChanTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpE1ChanTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.2 | ColumnlpE1ChanTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.4 | ColumnlpE1ChanTestStorageType | read-only | mandatory | This variable represents the storage type value for the lpE1ChanTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.10 | ColumnlpE1ChanTestIndex | not-accessible | mandatory | This variable represents the index for the lpE1ChanTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10 | TablelpE1ChanTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1 | RowlpE1ChanTestStateEntry | not-accessible | mandatory | An entry in the lpE1ChanTestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.1 | ColumnlpE1ChanTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.2 | ColumnlpE1ChanTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.3 | ColumnlpE1ChanTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11 | TablelpE1ChanTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1 | RowlpE1ChanTestSetupEntry | not-accessible | mandatory | An entry in the lpE1ChanTestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.1 | ColumnlpE1ChanTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.2 | ColumnlpE1ChanTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.3 | ColumnlpE1ChanTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.4 | ColumnlpE1ChanTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.5 | ColumnlpE1ChanTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.6 | ColumnlpE1ChanTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.7 | ColumnlpE1ChanTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.8 | ColumnlpE1ChanTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12 | TablelpE1ChanTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1 | RowlpE1ChanTestResultsEntry | not-accessible | mandatory | An entry in the lpE1ChanTestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.1 | ColumnlpE1ChanTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.2 | ColumnlpE1ChanTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.3 | ColumnlpE1ChanTestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.4 | ColumnlpE1ChanTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.5 | ColumnlpE1ChanTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.6 | ColumnlpE1ChanTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.7 | ColumnlpE1ChanTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.8 | ColumnlpE1ChanTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.9 | ColumnlpE1ChanTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.10 | ColumnlpE1ChanTestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.11 | ColumnlpE1ChanTestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3 | NodelpE1ChanCell | |||
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1 | TablelpE1ChanCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE1ChanCell components. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1 | RowlpE1ChanCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE1ChanCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.1 | ColumnlpE1ChanCellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpE1ChanCell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.2 | ColumnlpE1ChanCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.4 | ColumnlpE1ChanCellStorageType | read-only | mandatory | This variable represents the storage type value for the lpE1ChanCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.10 | ColumnlpE1ChanCellIndex | not-accessible | mandatory | This variable represents the index for the lpE1ChanCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10 | TablelpE1ChanCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1 | RowlpE1ChanCellProvEntry | not-accessible | mandatory | An entry in the lpE1ChanCellProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.1 | ColumnlpE1ChanCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.2 | ColumnlpE1ChanCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.3 | ColumnlpE1ChanCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.11 | TablelpE1ChanCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1 | RowlpE1ChanCellOperEntry | not-accessible | mandatory | An entry in the lpE1ChanCellOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1.1 | ColumnlpE1ChanCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12 | TablelpE1ChanCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1 | RowlpE1ChanCellStatsEntry | not-accessible | mandatory | An entry in the lpE1ChanCellStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.1 | ColumnlpE1ChanCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.2 | ColumnlpE1ChanCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.3 | ColumnlpE1ChanCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.4 | ColumnlpE1ChanCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.5 | ColumnlpE1ChanCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4 | NodelpE1ChanTc | |||
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1 | TablelpE1ChanTcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE1ChanTc components. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1 | RowlpE1ChanTcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE1ChanTc component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.1 | ColumnlpE1ChanTcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpE1ChanTc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.2 | ColumnlpE1ChanTcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.4 | ColumnlpE1ChanTcStorageType | read-only | mandatory | This variable represents the storage type value for the lpE1ChanTc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.10 | ColumnlpE1ChanTcIndex | not-accessible | mandatory | This variable represents the index for the lpE1ChanTc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.10 | TablelpE1ChanTcProvTable | not-accessible | mandatory | This group contains all specific provisioning data for a Tc component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1 | RowlpE1ChanTcProvEntry | not-accessible | mandatory | An entry in the lpE1ChanTcProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.1 | ColumnlpE1ChanTcReplacementData | read-write | mandatory | This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacemen… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.2 | ColumnlpE1ChanTcSignalOneDuration | read-write | mandatory | This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.11 | TablelpE1ChanTcOpTable | not-accessible | mandatory | This group contains all specific operational data for a Tc component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1 | RowlpE1ChanTcOpEntry | not-accessible | mandatory | An entry in the lpE1ChanTcOpTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.1 | ColumnlpE1ChanTcIngressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.2 | ColumnlpE1ChanTcEgressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards th… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.398 | TablelpE1ChanTcSigOneTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1 | RowlpE1ChanTcSigOneEntry | not-accessible | mandatory | An entry in the lpE1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.1 | ColumnlpE1ChanTcSigOneIndex | not-accessible | mandatory | This variable represents the lpE1ChanTcSigOneTable specific index for the lpE1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.2 | ColumnlpE1ChanTcSigOneValue | read-write | mandatory | This variable represents an individual value for the lpE1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.399 | TablelpE1ChanTcSigTwoTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1 | RowlpE1ChanTcSigTwoEntry | not-accessible | mandatory | An entry in the lpE1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.1 | ColumnlpE1ChanTcSigTwoIndex | not-accessible | mandatory | This variable represents the lpE1ChanTcSigTwoTable specific index for the lpE1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.2 | ColumnlpE1ChanTcSigTwoValue | read-write | mandatory | This variable represents an individual value for the lpE1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.10 | TablelpE1ChanProvTable | not-accessible | mandatory | This group contains all of the provisional data for a Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.10.1 | RowlpE1ChanProvEntry | not-accessible | mandatory | An entry in the lpE1ChanProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.1 | ColumnlpE1ChanTimeslots | read-write | mandatory | This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 fo… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.2 | ColumnlpE1ChanTimeslotDataRate | read-write | mandatory | This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardles… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.3 | ColumnlpE1ChanApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of this hardware component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.11 | TablelpE1ChanCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.11.1 | RowlpE1ChanCidDataEntry | not-accessible | mandatory | An entry in the lpE1ChanCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.11.1.1 | ColumnlpE1ChanCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.12 | TablelpE1ChanIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.12.1 | RowlpE1ChanIfEntryEntry | not-accessible | mandatory | An entry in the lpE1ChanIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.1 | ColumnlpE1ChanIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.2 | ColumnlpE1ChanIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.13 | TablelpE1ChanOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.13.1 | RowlpE1ChanOperStatusEntry | not-accessible | mandatory | An entry in the lpE1ChanOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.13.1.1 | ColumnlpE1ChanSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14 | TablelpE1ChanStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1 | RowlpE1ChanStateEntry | not-accessible | mandatory | An entry in the lpE1ChanStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.1 | ColumnlpE1ChanAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.2 | ColumnlpE1ChanOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.3 | ColumnlpE1ChanUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.4 | ColumnlpE1ChanAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.5 | ColumnlpE1ChanProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.6 | ColumnlpE1ChanControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.7 | ColumnlpE1ChanAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.8 | ColumnlpE1ChanStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.9 | ColumnlpE1ChanUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.15 | TablelpE1ChanOperTable | not-accessible | mandatory | This group contains all of the operational data for a Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.15.1 | RowlpE1ChanOperEntry | not-accessible | mandatory | An entry in the lpE1ChanOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.15.1.1 | ColumnlpE1ChanActualChannelSpeed | read-only | mandatory | This attribute displays the measured link speed of the Channel component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.16 | TablelpE1ChanAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.16.1 | RowlpE1ChanAdminInfoEntry | not-accessible | mandatory | An entry in the lpE1ChanAdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.1 | ColumnlpE1ChanVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.2 | ColumnlpE1ChanCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3 | NodelpE1Test | |||
| 1.3.6.1.4.1.562.2.4.1.12.8.3.1 | TablelpE1TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE1Test components. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1 | RowlpE1TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE1Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.1 | ColumnlpE1TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpE1Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.2 | ColumnlpE1TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.4 | ColumnlpE1TestStorageType | read-only | mandatory | This variable represents the storage type value for the lpE1Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.10 | ColumnlpE1TestIndex | not-accessible | mandatory | This variable represents the index for the lpE1Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.10 | TablelpE1TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.10.1 | RowlpE1TestStateEntry | not-accessible | mandatory | An entry in the lpE1TestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.1 | ColumnlpE1TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.2 | ColumnlpE1TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.3 | ColumnlpE1TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11 | TablelpE1TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1 | RowlpE1TestSetupEntry | not-accessible | mandatory | An entry in the lpE1TestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.1 | ColumnlpE1TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.2 | ColumnlpE1TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.3 | ColumnlpE1TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.4 | ColumnlpE1TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.5 | ColumnlpE1TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.6 | ColumnlpE1TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.7 | ColumnlpE1TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.8 | ColumnlpE1TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12 | TablelpE1TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1 | RowlpE1TestResultsEntry | not-accessible | mandatory | An entry in the lpE1TestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.1 | ColumnlpE1TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.2 | ColumnlpE1TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.3 | ColumnlpE1TestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.4 | ColumnlpE1TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.5 | ColumnlpE1TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.6 | ColumnlpE1TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.7 | ColumnlpE1TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.8 | ColumnlpE1TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.9 | ColumnlpE1TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.10 | ColumnlpE1TestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.11 | ColumnlpE1TestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.8.4 | NodelpE1Dsp | |||
| 1.3.6.1.4.1.562.2.4.1.12.8.4.1 | TablelpE1DspRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE1Dsp components. |
| 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1 | RowlpE1DspRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE1Dsp component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.1 | ColumnlpE1DspRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpE1Dsp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.2 | ColumnlpE1DspComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.4 | ColumnlpE1DspStorageType | read-only | mandatory | This variable represents the storage type value for the lpE1Dsp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.10 | ColumnlpE1DspIndex | not-accessible | mandatory | This variable represents the index for the lpE1Dsp tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.5 | NodelpE1Audio | |||
| 1.3.6.1.4.1.562.2.4.1.12.8.5.1 | TablelpE1AudioRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpE1Audio components. |
| 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1 | RowlpE1AudioRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpE1Audio component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.1 | ColumnlpE1AudioRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpE1Audio components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.2 | ColumnlpE1AudioComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.4 | ColumnlpE1AudioStorageType | read-only | mandatory | This variable represents the storage type value for the lpE1Audio tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.10 | ColumnlpE1AudioIndex | not-accessible | mandatory | This variable represents the index for the lpE1Audio tables. |
| 1.3.6.1.4.1.562.2.4.1.12.8.10 | TablelpE1ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for an E1 component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1 | RowlpE1ProvEntry | not-accessible | mandatory | An entry in the lpE1ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.1 | ColumnlpE1LineType | read-write | mandatory | This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling an… |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.2 | ColumnlpE1ClockingSource | read-write | mandatory | This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. W… |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.3 | ColumnlpE1Crc4Mode | read-write | mandatory | This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based… |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.4 | ColumnlpE1SendRaiOnAis | read-write | mandatory | This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no … |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.5 | ColumnlpE1RaiDeclareAlarmTime | read-write | mandatory | This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI d… |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.6 | ColumnlpE1RaiClearAlarmTime | read-write | mandatory | This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI cl… |
| 1.3.6.1.4.1.562.2.4.1.12.8.11 | TablelpE1CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.8.11.1 | RowlpE1CidDataEntry | not-accessible | mandatory | An entry in the lpE1CidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.11.1.1 | ColumnlpE1CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.8.12 | TablelpE1AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.8.12.1 | RowlpE1AdminInfoEntry | not-accessible | mandatory | An entry in the lpE1AdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.12.1.1 | ColumnlpE1Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.8.12.1.2 | ColumnlpE1CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.8.13 | TablelpE1IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.8.13.1 | RowlpE1IfEntryEntry | not-accessible | mandatory | An entry in the lpE1IfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.13.1.1 | ColumnlpE1IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.8.13.1.2 | ColumnlpE1IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.8.14 | TablelpE1OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.8.14.1 | RowlpE1OperStatusEntry | not-accessible | mandatory | An entry in the lpE1OperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.14.1.1 | ColumnlpE1SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15 | TablelpE1StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1 | RowlpE1StateEntry | not-accessible | mandatory | An entry in the lpE1StateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.1 | ColumnlpE1AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.2 | ColumnlpE1OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.3 | ColumnlpE1UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.4 | ColumnlpE1AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.5 | ColumnlpE1ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.6 | ColumnlpE1ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.7 | ColumnlpE1AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.8 | ColumnlpE1StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.8.15.1.9 | ColumnlpE1UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.8.16 | TablelpE1OperTable | not-accessible | mandatory | This group contains the common operational data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.2.4.1.12.8.16.1 | RowlpE1OperEntry | not-accessible | mandatory | An entry in the lpE1OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.16.1.1 | ColumnlpE1LosAlarm | read-only | mandatory | This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulat… |
| 1.3.6.1.4.1.562.2.4.1.12.8.16.1.2 | ColumnlpE1RxAisAlarm | read-only | mandatory | This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observ… |
| 1.3.6.1.4.1.562.2.4.1.12.8.16.1.3 | ColumnlpE1LofAlarm | read-only | mandatory | This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framin… |
| 1.3.6.1.4.1.562.2.4.1.12.8.16.1.4 | ColumnlpE1RxRaiAlarm | read-only | mandatory | This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has … |
| 1.3.6.1.4.1.562.2.4.1.12.8.16.1.5 | ColumnlpE1TxAisAlarm | read-only | mandatory | This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a lock… |
| 1.3.6.1.4.1.562.2.4.1.12.8.16.1.6 | ColumnlpE1TxRaiAlarm | read-only | mandatory | This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for… |
| 1.3.6.1.4.1.562.2.4.1.12.8.17 | TablelpE1E1OperTable | not-accessible | mandatory | This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group. |
| 1.3.6.1.4.1.562.2.4.1.12.8.17.1 | RowlpE1E1OperEntry | not-accessible | mandatory | An entry in the lpE1E1OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.17.1.1 | ColumnlpE1MultifrmLofAlarm | read-only | mandatory | This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect … |
| 1.3.6.1.4.1.562.2.4.1.12.8.17.1.2 | ColumnlpE1RxMultifrmRaiAlarm | read-only | mandatory | This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multifra… |
| 1.3.6.1.4.1.562.2.4.1.12.8.17.1.3 | ColumnlpE1TxMultifrmRaiAlarm | read-only | mandatory | This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a mu… |
| 1.3.6.1.4.1.562.2.4.1.12.8.18 | TablelpE1StatsTable | not-accessible | mandatory | This group contains the common statistical data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1 | RowlpE1StatsEntry | not-accessible | mandatory | An entry in the lpE1StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.1 | ColumnlpE1RunningTime | read-only | mandatory | The number of seconds since the port component was activated. |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.2 | ColumnlpE1ErrorFreeSec | read-only | mandatory | The number of seconds that the port has been in an error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.3 | ColumnlpE1ErroredSec | read-only | mandatory | An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may… |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.4 | ColumnlpE1SevErroredSec | read-only | mandatory | A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs. |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.5 | ColumnlpE1SevErroredFrmSec | read-only | mandatory | A severely errored framing second occurs when a second with one or more Out Of Frame events occurs. |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.6 | ColumnlpE1UnavailSec | read-only | mandatory | The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Er… |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.7 | ColumnlpE1BpvErrors | read-only | mandatory | The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.8 | ColumnlpE1CrcErrors | read-only | mandatory | If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, i… |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.9 | ColumnlpE1FrmErrors | read-only | mandatory | The current count of frame errors. A frame error is an error in the framing bits |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.10 | ColumnlpE1LosStateChanges | read-only | mandatory | The total number of times that the line lost signal. |
| 1.3.6.1.4.1.562.2.4.1.12.8.18.1.11 | ColumnlpE1SlipErrors | read-only | mandatory | The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V… |
| 1.3.6.1.4.1.562.2.4.1.12.9 | NodelpV35 | |||
| 1.3.6.1.4.1.562.2.4.1.12.9.1 | TablelpV35RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpV35 components. |
| 1.3.6.1.4.1.562.2.4.1.12.9.1.1 | RowlpV35RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpV35 component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.1.1.1 | ColumnlpV35RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpV35 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.9.1.1.2 | ColumnlpV35ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.9.1.1.4 | ColumnlpV35StorageType | read-only | mandatory | This variable represents the storage type value for the lpV35 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.9.1.1.10 | ColumnlpV35Index | not-accessible | mandatory | This variable represents the index for the lpV35 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2 | NodelpV35Test | |||
| 1.3.6.1.4.1.562.2.4.1.12.9.2.1 | TablelpV35TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpV35Test components. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1 | RowlpV35TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpV35Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.1 | ColumnlpV35TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpV35Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.2 | ColumnlpV35TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.4 | ColumnlpV35TestStorageType | read-only | mandatory | This variable represents the storage type value for the lpV35Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.10 | ColumnlpV35TestIndex | not-accessible | mandatory | This variable represents the index for the lpV35Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.10 | TablelpV35TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.10.1 | RowlpV35TestStateEntry | not-accessible | mandatory | An entry in the lpV35TestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.1 | ColumnlpV35TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.2 | ColumnlpV35TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.3 | ColumnlpV35TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11 | TablelpV35TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1 | RowlpV35TestSetupEntry | not-accessible | mandatory | An entry in the lpV35TestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.1 | ColumnlpV35TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.2 | ColumnlpV35TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.3 | ColumnlpV35TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.4 | ColumnlpV35TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.5 | ColumnlpV35TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.6 | ColumnlpV35TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.7 | ColumnlpV35TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.8 | ColumnlpV35TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12 | TablelpV35TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1 | RowlpV35TestResultsEntry | not-accessible | mandatory | An entry in the lpV35TestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.1 | ColumnlpV35TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.2 | ColumnlpV35TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.3 | ColumnlpV35TestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.4 | ColumnlpV35TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.5 | ColumnlpV35TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.6 | ColumnlpV35TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.7 | ColumnlpV35TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.8 | ColumnlpV35TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.9 | ColumnlpV35TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.10 | ColumnlpV35TestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.11 | ColumnlpV35TestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10 | TablelpV35ProvTable | not-accessible | mandatory | This group contains all specific provisioning data for a V35 component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1 | RowlpV35ProvEntry | not-accessible | mandatory | An entry in the lpV35ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.1 | ColumnlpV35LinkMode | read-write | mandatory | This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch pane… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.2 | ColumnlpV35ReadyLineState | read-write | mandatory | This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. Thi… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.3 | ColumnlpV35DataTransferLineState | read-write | mandatory | This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that b… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.4 | ColumnlpV35LineStatusTimeOut | read-write | mandatory | This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared. |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.5 | ColumnlpV35LineSpeed | read-write | mandatory | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounde… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.6 | ColumnlpV35ClockingSource | read-write | mandatory | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the at… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.7 | ColumnlpV35DteDataClockSource | read-write | mandatory | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.8 | ColumnlpV35ApplicationFramerName | read-write | mandatory | This attribute contains the component name of a Framer which is associated with the V35 component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.9 | ColumnlpV35EnableDynamicSpeed | read-write | mandatory | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes on… |
| 1.3.6.1.4.1.562.2.4.1.12.9.11 | TablelpV35CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.9.11.1 | RowlpV35CidDataEntry | not-accessible | mandatory | An entry in the lpV35CidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.11.1.1 | ColumnlpV35CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.9.12 | TablelpV35AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.9.12.1 | RowlpV35AdminInfoEntry | not-accessible | mandatory | An entry in the lpV35AdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.12.1.1 | ColumnlpV35Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.9.12.1.2 | ColumnlpV35CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.9.13 | TablelpV35IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.9.13.1 | RowlpV35IfEntryEntry | not-accessible | mandatory | An entry in the lpV35IfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.13.1.1 | ColumnlpV35IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.9.13.1.2 | ColumnlpV35IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.9.14 | TablelpV35OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.14.1 | RowlpV35OperStatusEntry | not-accessible | mandatory | An entry in the lpV35OperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.14.1.1 | ColumnlpV35SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15 | TablelpV35StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1 | RowlpV35StateEntry | not-accessible | mandatory | An entry in the lpV35StateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.1 | ColumnlpV35AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.2 | ColumnlpV35OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.3 | ColumnlpV35UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.4 | ColumnlpV35AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.5 | ColumnlpV35ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.6 | ColumnlpV35ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.7 | ColumnlpV35AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.8 | ColumnlpV35StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.9.15.1.9 | ColumnlpV35UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.9.16 | TablelpV35OperTable | not-accessible | mandatory | This group contains all specific operational data for a V35 component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.16.1 | RowlpV35OperEntry | not-accessible | mandatory | An entry in the lpV35OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.9.16.1.1 | ColumnlpV35ActualLinkMode | read-only | mandatory | This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE o… |
| 1.3.6.1.4.1.562.2.4.1.12.9.16.1.2 | ColumnlpV35LineState | read-only | mandatory | This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3) |
| 1.3.6.1.4.1.562.2.4.1.12.9.16.1.3 | ColumnlpV35ActualTxLineSpeed | read-only | mandatory | This attribute is the measured speed of the transmit clock. |
| 1.3.6.1.4.1.562.2.4.1.12.9.16.1.4 | ColumnlpV35ActualRxLineSpeed | read-only | mandatory | This attribute is the measured speed of the receive clock. |
| 1.3.6.1.4.1.562.2.4.1.12.9.16.1.5 | ColumnlpV35DataXferStateChanges | read-only | mandatory | This attribute contains the number of times that the line has entered or exited the data transfer state. |
| 1.3.6.1.4.1.562.2.4.1.12.10 | NodelpX21 | |||
| 1.3.6.1.4.1.562.2.4.1.12.10.1 | TablelpX21RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpX21 components. |
| 1.3.6.1.4.1.562.2.4.1.12.10.1.1 | RowlpX21RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpX21 component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.1.1.1 | ColumnlpX21RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpX21 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.10.1.1.2 | ColumnlpX21ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.10.1.1.4 | ColumnlpX21StorageType | read-only | mandatory | This variable represents the storage type value for the lpX21 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.10.1.1.10 | ColumnlpX21Index | not-accessible | mandatory | This variable represents the index for the lpX21 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2 | NodelpX21Test | |||
| 1.3.6.1.4.1.562.2.4.1.12.10.2.1 | TablelpX21TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpX21Test components. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1 | RowlpX21TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpX21Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.1 | ColumnlpX21TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpX21Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.2 | ColumnlpX21TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.4 | ColumnlpX21TestStorageType | read-only | mandatory | This variable represents the storage type value for the lpX21Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.10 | ColumnlpX21TestIndex | not-accessible | mandatory | This variable represents the index for the lpX21Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.10 | TablelpX21TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.10.1 | RowlpX21TestStateEntry | not-accessible | mandatory | An entry in the lpX21TestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.1 | ColumnlpX21TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.2 | ColumnlpX21TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.3 | ColumnlpX21TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11 | TablelpX21TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1 | RowlpX21TestSetupEntry | not-accessible | mandatory | An entry in the lpX21TestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.1 | ColumnlpX21TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.2 | ColumnlpX21TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.3 | ColumnlpX21TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.4 | ColumnlpX21TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.5 | ColumnlpX21TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.6 | ColumnlpX21TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.7 | ColumnlpX21TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.8 | ColumnlpX21TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12 | TablelpX21TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1 | RowlpX21TestResultsEntry | not-accessible | mandatory | An entry in the lpX21TestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.1 | ColumnlpX21TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.2 | ColumnlpX21TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.3 | ColumnlpX21TestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.4 | ColumnlpX21TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.5 | ColumnlpX21TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.6 | ColumnlpX21TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.7 | ColumnlpX21TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.8 | ColumnlpX21TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.9 | ColumnlpX21TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.10 | ColumnlpX21TestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.11 | ColumnlpX21TestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10 | TablelpX21ProvTable | not-accessible | mandatory | This group contains all specific provisioning data for an X21 component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1 | RowlpX21ProvEntry | not-accessible | mandatory | An entry in the lpX21ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.1 | ColumnlpX21LinkMode | read-write | mandatory | This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection t… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.2 | ColumnlpX21ReadyLineState | read-write | mandatory | This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. Thi… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.3 | ColumnlpX21DataTransferLineState | read-write | mandatory | The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and … |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.4 | ColumnlpX21LineStatusTimeOut | read-write | mandatory | This attribute defines the time the line state must be stable (good or bad) before a state change is declared. |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.5 | ColumnlpX21LineSpeed | read-write | mandatory | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounde… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.6 | ColumnlpX21ClockingSource | read-write | mandatory | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the at… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.7 | ColumnlpX21DteDataClockSource | read-write | mandatory | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE inte… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.8 | ColumnlpX21LineTerminationRequired | read-write | mandatory | This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated. |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.9 | ColumnlpX21ApplicationFramerName | read-write | mandatory | This attribute contains the component name of a Framer which is associated with the X21 component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.10 | ColumnlpX21EnableDynamicSpeed | read-write | mandatory | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes on… |
| 1.3.6.1.4.1.562.2.4.1.12.10.11 | TablelpX21CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.10.11.1 | RowlpX21CidDataEntry | not-accessible | mandatory | An entry in the lpX21CidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.11.1.1 | ColumnlpX21CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.10.12 | TablelpX21AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.10.12.1 | RowlpX21AdminInfoEntry | not-accessible | mandatory | An entry in the lpX21AdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.12.1.1 | ColumnlpX21Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.10.12.1.2 | ColumnlpX21CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.10.13 | TablelpX21IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.10.13.1 | RowlpX21IfEntryEntry | not-accessible | mandatory | An entry in the lpX21IfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.13.1.1 | ColumnlpX21IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.10.13.1.2 | ColumnlpX21IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.10.14 | TablelpX21OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.14.1 | RowlpX21OperStatusEntry | not-accessible | mandatory | An entry in the lpX21OperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.14.1.1 | ColumnlpX21SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15 | TablelpX21StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1 | RowlpX21StateEntry | not-accessible | mandatory | An entry in the lpX21StateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.1 | ColumnlpX21AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.2 | ColumnlpX21OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.3 | ColumnlpX21UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.4 | ColumnlpX21AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.5 | ColumnlpX21ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.6 | ColumnlpX21ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.7 | ColumnlpX21AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.8 | ColumnlpX21StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.10.15.1.9 | ColumnlpX21UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.10.16 | TablelpX21OperTable | not-accessible | mandatory | This group contains all specific operational data for an X21 component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.16.1 | RowlpX21OperEntry | not-accessible | mandatory | An entry in the lpX21OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.10.16.1.1 | ColumnlpX21ActualLinkMode | read-only | mandatory | This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE o… |
| 1.3.6.1.4.1.562.2.4.1.12.10.16.1.2 | ColumnlpX21LineState | read-only | mandatory | This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1) |
| 1.3.6.1.4.1.562.2.4.1.12.10.16.1.3 | ColumnlpX21ActualTxLineSpeed | read-only | mandatory | This attribute is the measured speed of the transmit clock. |
| 1.3.6.1.4.1.562.2.4.1.12.10.16.1.4 | ColumnlpX21ActualRxLineSpeed | read-only | mandatory | This attribute is the measured speed of the receive clock. |
| 1.3.6.1.4.1.562.2.4.1.12.10.16.1.5 | ColumnlpX21DataXferStateChanges | read-only | mandatory | This attribute contains the number of times that the line has entered or exited the data transfer state. |
| 1.3.6.1.4.1.562.2.4.1.12.14 | NodelpSonet | |||
| 1.3.6.1.4.1.562.2.4.1.12.14.1 | TablelpSonetRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpSonet components. |
| 1.3.6.1.4.1.562.2.4.1.12.14.1.1 | RowlpSonetRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpSonet component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.1.1.1 | ColumnlpSonetRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpSonet components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.14.1.1.2 | ColumnlpSonetComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.14.1.1.4 | ColumnlpSonetStorageType | read-only | mandatory | This variable represents the storage type value for the lpSonet tables. |
| 1.3.6.1.4.1.562.2.4.1.12.14.1.1.10 | ColumnlpSonetIndex | not-accessible | mandatory | This variable represents the index for the lpSonet tables. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2 | NodelpSonetPath | |||
| 1.3.6.1.4.1.562.2.4.1.12.14.2.1 | TablelpSonetPathRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpSonetPath components. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1 | RowlpSonetPathRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpSonetPath component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.1 | ColumnlpSonetPathRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpSonetPath components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.2 | ColumnlpSonetPathComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.4 | ColumnlpSonetPathStorageType | read-only | mandatory | This variable represents the storage type value for the lpSonetPath tables. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.10 | ColumnlpSonetPathIndex | not-accessible | mandatory | This variable represents the index for the lpSonetPath tables. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2 | NodelpSonetPathCell | |||
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1 | TablelpSonetPathCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpSonetPathCell components. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1 | RowlpSonetPathCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpSonetPathCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.1 | ColumnlpSonetPathCellRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpSonetPathCell components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.2 | ColumnlpSonetPathCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.4 | ColumnlpSonetPathCellStorageType | read-only | mandatory | This variable represents the storage type value for the lpSonetPathCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.10 | ColumnlpSonetPathCellIndex | not-accessible | mandatory | This variable represents the index for the lpSonetPathCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10 | TablelpSonetPathCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1 | RowlpSonetPathCellProvEntry | not-accessible | mandatory | An entry in the lpSonetPathCellProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.1 | ColumnlpSonetPathCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.2 | ColumnlpSonetPathCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.3 | ColumnlpSonetPathCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.11 | TablelpSonetPathCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1 | RowlpSonetPathCellOperEntry | not-accessible | mandatory | An entry in the lpSonetPathCellOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1.1 | ColumnlpSonetPathCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12 | TablelpSonetPathCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1 | RowlpSonetPathCellStatsEntry | not-accessible | mandatory | An entry in the lpSonetPathCellStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.1 | ColumnlpSonetPathCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.2 | ColumnlpSonetPathCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.3 | ColumnlpSonetPathCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.4 | ColumnlpSonetPathCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.5 | ColumnlpSonetPathCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.10 | TablelpSonetPathProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a Sonet/Sdh Path component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.10.1 | RowlpSonetPathProvEntry | not-accessible | mandatory | An entry in the lpSonetPathProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.10.1.1 | ColumnlpSonetPathApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the Path component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.11 | TablelpSonetPathCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.11.1 | RowlpSonetPathCidDataEntry | not-accessible | mandatory | An entry in the lpSonetPathCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.11.1.1 | ColumnlpSonetPathCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12 | TablelpSonetPathStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1 | RowlpSonetPathStateEntry | not-accessible | mandatory | An entry in the lpSonetPathStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.1 | ColumnlpSonetPathAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.2 | ColumnlpSonetPathOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.3 | ColumnlpSonetPathUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.4 | ColumnlpSonetPathAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.5 | ColumnlpSonetPathProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.6 | ColumnlpSonetPathControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.7 | ColumnlpSonetPathAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.8 | ColumnlpSonetPathStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.9 | ColumnlpSonetPathUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.13 | TablelpSonetPathIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.13.1 | RowlpSonetPathIfEntryEntry | not-accessible | mandatory | An entry in the lpSonetPathIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.1 | ColumnlpSonetPathIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.2 | ColumnlpSonetPathIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.14 | TablelpSonetPathOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.14.1 | RowlpSonetPathOperStatusEntry | not-accessible | mandatory | An entry in the lpSonetPathOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.14.1.1 | ColumnlpSonetPathSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15 | TablelpSonetPathOperTable | not-accessible | mandatory | This group contains the common operational data for Path component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1 | RowlpSonetPathOperEntry | not-accessible | mandatory | An entry in the lpSonetPathOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.1 | ColumnlpSonetPathLopAlarm | read-only | mandatory | This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and acc… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.2 | ColumnlpSonetPathRxAisAlarm | read-only | mandatory | This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have … |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.3 | ColumnlpSonetPathRxRfiAlarm | read-only | mandatory | This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defec… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.4 | ColumnlpSonetPathSignalLabelMismatch | read-only | mandatory | This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM de… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.5 | ColumnlpSonetPathTxAis | read-only | mandatory | This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Pat… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.6 | ColumnlpSonetPathTxRdi | read-only | mandatory | This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16 | TablelpSonetPathStatsTable | not-accessible | mandatory | This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1 | RowlpSonetPathStatsEntry | not-accessible | mandatory | An entry in the lpSonetPathStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.1 | ColumnlpSonetPathPathErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.2 | ColumnlpSonetPathPathCodeViolations | read-only | mandatory | This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over s… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.3 | ColumnlpSonetPathPathErroredSec | read-only | mandatory | This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.4 | ColumnlpSonetPathPathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.5 | ColumnlpSonetPathPathAisLopSec | read-only | mandatory | This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP d… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.6 | ColumnlpSonetPathPathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.7 | ColumnlpSonetPathPathFailures | read-only | mandatory | This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.8 | ColumnlpSonetPathFarEndPathErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.9 | ColumnlpSonetPathFarEndPathCodeViolations | read-only | mandatory | This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.10 | ColumnlpSonetPathFarEndPathErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing … |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.11 | ColumnlpSonetPathFarEndPathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals … |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.12 | ColumnlpSonetPathFarEndPathAisLopSec | read-only | mandatory | This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.13 | ColumnlpSonetPathFarEndPathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at th… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.14 | ColumnlpSonetPathFarEndPathFailures | read-only | mandatory | This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3 | NodelpSonetTest | |||
| 1.3.6.1.4.1.562.2.4.1.12.14.3.1 | TablelpSonetTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpSonetTest components. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1 | RowlpSonetTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpSonetTest component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.1 | ColumnlpSonetTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpSonetTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.2 | ColumnlpSonetTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.4 | ColumnlpSonetTestStorageType | read-only | mandatory | This variable represents the storage type value for the lpSonetTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.10 | ColumnlpSonetTestIndex | not-accessible | mandatory | This variable represents the index for the lpSonetTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.10 | TablelpSonetTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.10.1 | RowlpSonetTestStateEntry | not-accessible | mandatory | An entry in the lpSonetTestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.1 | ColumnlpSonetTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.2 | ColumnlpSonetTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.3 | ColumnlpSonetTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11 | TablelpSonetTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1 | RowlpSonetTestSetupEntry | not-accessible | mandatory | An entry in the lpSonetTestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.1 | ColumnlpSonetTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.2 | ColumnlpSonetTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.3 | ColumnlpSonetTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.4 | ColumnlpSonetTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.5 | ColumnlpSonetTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.6 | ColumnlpSonetTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.7 | ColumnlpSonetTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.8 | ColumnlpSonetTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12 | TablelpSonetTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1 | RowlpSonetTestResultsEntry | not-accessible | mandatory | An entry in the lpSonetTestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.1 | ColumnlpSonetTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.2 | ColumnlpSonetTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.3 | ColumnlpSonetTestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.4 | ColumnlpSonetTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.5 | ColumnlpSonetTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.6 | ColumnlpSonetTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.7 | ColumnlpSonetTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.8 | ColumnlpSonetTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.9 | ColumnlpSonetTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.10 | ColumnlpSonetTestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.11 | ColumnlpSonetTestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.14.10 | TablelpSonetProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a Sonet or Sdh component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.10.1 | RowlpSonetProvEntry | not-accessible | mandatory | An entry in the lpSonetProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.10.1.1 | ColumnlpSonetClockingSource | read-write | mandatory | This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its … |
| 1.3.6.1.4.1.562.2.4.1.12.14.11 | TablelpSonetCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.14.11.1 | RowlpSonetCidDataEntry | not-accessible | mandatory | An entry in the lpSonetCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.11.1.1 | ColumnlpSonetCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.14.12 | TablelpSonetAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.14.12.1 | RowlpSonetAdminInfoEntry | not-accessible | mandatory | An entry in the lpSonetAdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.12.1.1 | ColumnlpSonetVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.14.12.1.2 | ColumnlpSonetCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.14.13 | TablelpSonetIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.14.13.1 | RowlpSonetIfEntryEntry | not-accessible | mandatory | An entry in the lpSonetIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.13.1.1 | ColumnlpSonetIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.14.13.1.2 | ColumnlpSonetIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.14.14 | TablelpSonetOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.14.1 | RowlpSonetOperStatusEntry | not-accessible | mandatory | An entry in the lpSonetOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.14.1.1 | ColumnlpSonetSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15 | TablelpSonetStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1 | RowlpSonetStateEntry | not-accessible | mandatory | An entry in the lpSonetStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.1 | ColumnlpSonetAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.2 | ColumnlpSonetOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.3 | ColumnlpSonetUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.4 | ColumnlpSonetAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.5 | ColumnlpSonetProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.6 | ColumnlpSonetControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.7 | ColumnlpSonetAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.8 | ColumnlpSonetStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.14.15.1.9 | ColumnlpSonetUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.14.16 | TablelpSonetOperTable | not-accessible | mandatory | This group contains the common operational data for Sonet or Sdh component. |
| 1.3.6.1.4.1.562.2.4.1.12.14.16.1 | RowlpSonetOperEntry | not-accessible | mandatory | An entry in the lpSonetOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.16.1.1 | ColumnlpSonetLosAlarm | read-only | mandatory | This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and acc… |
| 1.3.6.1.4.1.562.2.4.1.12.14.16.1.2 | ColumnlpSonetLofAlarm | read-only | mandatory | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accum… |
| 1.3.6.1.4.1.562.2.4.1.12.14.16.1.3 | ColumnlpSonetRxAisAlarm | read-only | mandatory | This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have b… |
| 1.3.6.1.4.1.562.2.4.1.12.14.16.1.4 | ColumnlpSonetRxRfiAlarm | read-only | mandatory | This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure … |
| 1.3.6.1.4.1.562.2.4.1.12.14.16.1.5 | ColumnlpSonetTxAis | read-only | mandatory | This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the… |
| 1.3.6.1.4.1.562.2.4.1.12.14.16.1.6 | ColumnlpSonetTxRdi | read-only | mandatory | This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon t… |
| 1.3.6.1.4.1.562.2.4.1.12.14.16.1.7 | ColumnlpSonetUnusableTxClockRefAlarm | read-only | mandatory | This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port p… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17 | TablelpSonetStatsTable | not-accessible | mandatory | This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reac… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1 | RowlpSonetStatsEntry | not-accessible | mandatory | An entry in the lpSonetStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.1 | ColumnlpSonetRunningTime | read-only | mandatory | This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts t… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.2 | ColumnlpSonetErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.3 | ColumnlpSonetSectCodeViolations | read-only | mandatory | This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for s… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.4 | ColumnlpSonetSectErroredSec | read-only | mandatory | This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or mo… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.5 | ColumnlpSonetSectSevErroredSec | read-only | mandatory | This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containin… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.6 | ColumnlpSonetSectLosSec | read-only | mandatory | This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or mo… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.7 | ColumnlpSonetSectSevErroredFrmSec | read-only | mandatory | This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals c… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.8 | ColumnlpSonetSectFailures | read-only | mandatory | This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.9 | ColumnlpSonetLineCodeViolations | read-only | mandatory | This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for sec… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.10 | ColumnlpSonetLineErroredSec | read-only | mandatory | This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.11 | ColumnlpSonetLineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.12 | ColumnlpSonetLineAisSec | read-only | mandatory | This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.13 | ColumnlpSonetLineUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.14 | ColumnlpSonetLineFailures | read-only | mandatory | This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.15 | ColumnlpSonetFarEndLineErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.16 | ColumnlpSonetFarEndLineCodeViolations | read-only | mandatory | This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.17 | ColumnlpSonetFarEndLineErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing … |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.18 | ColumnlpSonetFarEndLineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals … |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.19 | ColumnlpSonetFarEndLineAisSec | read-only | mandatory | This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.20 | ColumnlpSonetFarEndLineUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at th… |
| 1.3.6.1.4.1.562.2.4.1.12.14.17.1.21 | ColumnlpSonetFarEndLineFailures | read-only | mandatory | This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.15 | NodelpSdh | |||
| 1.3.6.1.4.1.562.2.4.1.12.15.1 | TablelpSdhRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpSdh components. |
| 1.3.6.1.4.1.562.2.4.1.12.15.1.1 | RowlpSdhRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpSdh component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.1.1.1 | ColumnlpSdhRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpSdh components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.15.1.1.2 | ColumnlpSdhComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.15.1.1.4 | ColumnlpSdhStorageType | read-only | mandatory | This variable represents the storage type value for the lpSdh tables. |
| 1.3.6.1.4.1.562.2.4.1.12.15.1.1.10 | ColumnlpSdhIndex | not-accessible | mandatory | This variable represents the index for the lpSdh tables. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2 | NodelpSdhPath | |||
| 1.3.6.1.4.1.562.2.4.1.12.15.2.1 | TablelpSdhPathRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpSdhPath components. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1 | RowlpSdhPathRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpSdhPath component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.1 | ColumnlpSdhPathRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpSdhPath components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.2 | ColumnlpSdhPathComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.4 | ColumnlpSdhPathStorageType | read-only | mandatory | This variable represents the storage type value for the lpSdhPath tables. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.10 | ColumnlpSdhPathIndex | not-accessible | mandatory | This variable represents the index for the lpSdhPath tables. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2 | NodelpSdhPathCell | |||
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1 | TablelpSdhPathCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpSdhPathCell components. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1 | RowlpSdhPathCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpSdhPathCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.1 | ColumnlpSdhPathCellRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpSdhPathCell components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.2 | ColumnlpSdhPathCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.4 | ColumnlpSdhPathCellStorageType | read-only | mandatory | This variable represents the storage type value for the lpSdhPathCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.10 | ColumnlpSdhPathCellIndex | not-accessible | mandatory | This variable represents the index for the lpSdhPathCell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10 | TablelpSdhPathCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1 | RowlpSdhPathCellProvEntry | not-accessible | mandatory | An entry in the lpSdhPathCellProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.1 | ColumnlpSdhPathCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.2 | ColumnlpSdhPathCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.3 | ColumnlpSdhPathCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.11 | TablelpSdhPathCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1 | RowlpSdhPathCellOperEntry | not-accessible | mandatory | An entry in the lpSdhPathCellOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1.1 | ColumnlpSdhPathCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12 | TablelpSdhPathCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1 | RowlpSdhPathCellStatsEntry | not-accessible | mandatory | An entry in the lpSdhPathCellStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.1 | ColumnlpSdhPathCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.2 | ColumnlpSdhPathCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.3 | ColumnlpSdhPathCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.4 | ColumnlpSdhPathCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.5 | ColumnlpSdhPathCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.10 | TablelpSdhPathProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a Sonet/Sdh Path component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.10.1 | RowlpSdhPathProvEntry | not-accessible | mandatory | An entry in the lpSdhPathProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.10.1.1 | ColumnlpSdhPathApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the Path component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.11 | TablelpSdhPathCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.11.1 | RowlpSdhPathCidDataEntry | not-accessible | mandatory | An entry in the lpSdhPathCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.11.1.1 | ColumnlpSdhPathCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12 | TablelpSdhPathStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1 | RowlpSdhPathStateEntry | not-accessible | mandatory | An entry in the lpSdhPathStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.1 | ColumnlpSdhPathAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.2 | ColumnlpSdhPathOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.3 | ColumnlpSdhPathUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.4 | ColumnlpSdhPathAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.5 | ColumnlpSdhPathProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.6 | ColumnlpSdhPathControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.7 | ColumnlpSdhPathAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.8 | ColumnlpSdhPathStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.9 | ColumnlpSdhPathUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.13 | TablelpSdhPathIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.13.1 | RowlpSdhPathIfEntryEntry | not-accessible | mandatory | An entry in the lpSdhPathIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.1 | ColumnlpSdhPathIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.2 | ColumnlpSdhPathIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.14 | TablelpSdhPathOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.14.1 | RowlpSdhPathOperStatusEntry | not-accessible | mandatory | An entry in the lpSdhPathOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.14.1.1 | ColumnlpSdhPathSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.15 | TablelpSdhPathOperTable | not-accessible | mandatory | This group contains the common operational data for Path component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1 | RowlpSdhPathOperEntry | not-accessible | mandatory | An entry in the lpSdhPathOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.1 | ColumnlpSdhPathLopAlarm | read-only | mandatory | This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and acc… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.2 | ColumnlpSdhPathRxAisAlarm | read-only | mandatory | This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have … |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.3 | ColumnlpSdhPathRxRfiAlarm | read-only | mandatory | This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defec… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.4 | ColumnlpSdhPathSignalLabelMismatch | read-only | mandatory | This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM de… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.5 | ColumnlpSdhPathTxAis | read-only | mandatory | This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Pat… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.6 | ColumnlpSdhPathTxRdi | read-only | mandatory | This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16 | TablelpSdhPathStatsTable | not-accessible | mandatory | This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1 | RowlpSdhPathStatsEntry | not-accessible | mandatory | An entry in the lpSdhPathStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.1 | ColumnlpSdhPathPathErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.2 | ColumnlpSdhPathPathCodeViolations | read-only | mandatory | This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over s… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.3 | ColumnlpSdhPathPathErroredSec | read-only | mandatory | This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.4 | ColumnlpSdhPathPathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.5 | ColumnlpSdhPathPathAisLopSec | read-only | mandatory | This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP d… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.6 | ColumnlpSdhPathPathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.7 | ColumnlpSdhPathPathFailures | read-only | mandatory | This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.8 | ColumnlpSdhPathFarEndPathErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.9 | ColumnlpSdhPathFarEndPathCodeViolations | read-only | mandatory | This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.10 | ColumnlpSdhPathFarEndPathErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing … |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.11 | ColumnlpSdhPathFarEndPathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals … |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.12 | ColumnlpSdhPathFarEndPathAisLopSec | read-only | mandatory | This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.13 | ColumnlpSdhPathFarEndPathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at th… |
| 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.14 | ColumnlpSdhPathFarEndPathFailures | read-only | mandatory | This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3 | NodelpSdhTest | |||
| 1.3.6.1.4.1.562.2.4.1.12.15.3.1 | TablelpSdhTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpSdhTest components. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1 | RowlpSdhTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpSdhTest component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.1 | ColumnlpSdhTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpSdhTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.2 | ColumnlpSdhTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.4 | ColumnlpSdhTestStorageType | read-only | mandatory | This variable represents the storage type value for the lpSdhTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.10 | ColumnlpSdhTestIndex | not-accessible | mandatory | This variable represents the index for the lpSdhTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.10 | TablelpSdhTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.10.1 | RowlpSdhTestStateEntry | not-accessible | mandatory | An entry in the lpSdhTestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.1 | ColumnlpSdhTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.2 | ColumnlpSdhTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.3 | ColumnlpSdhTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11 | TablelpSdhTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1 | RowlpSdhTestSetupEntry | not-accessible | mandatory | An entry in the lpSdhTestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.1 | ColumnlpSdhTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.2 | ColumnlpSdhTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.3 | ColumnlpSdhTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.4 | ColumnlpSdhTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.5 | ColumnlpSdhTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.6 | ColumnlpSdhTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.7 | ColumnlpSdhTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.8 | ColumnlpSdhTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12 | TablelpSdhTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1 | RowlpSdhTestResultsEntry | not-accessible | mandatory | An entry in the lpSdhTestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.1 | ColumnlpSdhTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.2 | ColumnlpSdhTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.3 | ColumnlpSdhTestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.4 | ColumnlpSdhTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.5 | ColumnlpSdhTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.6 | ColumnlpSdhTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.7 | ColumnlpSdhTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.8 | ColumnlpSdhTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.9 | ColumnlpSdhTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.10 | ColumnlpSdhTestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.11 | ColumnlpSdhTestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.15.10 | TablelpSdhProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a Sonet or Sdh component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.10.1 | RowlpSdhProvEntry | not-accessible | mandatory | An entry in the lpSdhProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.10.1.1 | ColumnlpSdhClockingSource | read-write | mandatory | This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its … |
| 1.3.6.1.4.1.562.2.4.1.12.15.11 | TablelpSdhCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.15.11.1 | RowlpSdhCidDataEntry | not-accessible | mandatory | An entry in the lpSdhCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.11.1.1 | ColumnlpSdhCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.15.12 | TablelpSdhAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.15.12.1 | RowlpSdhAdminInfoEntry | not-accessible | mandatory | An entry in the lpSdhAdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.12.1.1 | ColumnlpSdhVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.15.12.1.2 | ColumnlpSdhCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.15.13 | TablelpSdhIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.15.13.1 | RowlpSdhIfEntryEntry | not-accessible | mandatory | An entry in the lpSdhIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.13.1.1 | ColumnlpSdhIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.15.13.1.2 | ColumnlpSdhIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.15.14 | TablelpSdhOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.14.1 | RowlpSdhOperStatusEntry | not-accessible | mandatory | An entry in the lpSdhOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.14.1.1 | ColumnlpSdhSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15 | TablelpSdhStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1 | RowlpSdhStateEntry | not-accessible | mandatory | An entry in the lpSdhStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.1 | ColumnlpSdhAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.2 | ColumnlpSdhOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.3 | ColumnlpSdhUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.4 | ColumnlpSdhAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.5 | ColumnlpSdhProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.6 | ColumnlpSdhControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.7 | ColumnlpSdhAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.8 | ColumnlpSdhStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.15.15.1.9 | ColumnlpSdhUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.15.16 | TablelpSdhOperTable | not-accessible | mandatory | This group contains the common operational data for Sonet or Sdh component. |
| 1.3.6.1.4.1.562.2.4.1.12.15.16.1 | RowlpSdhOperEntry | not-accessible | mandatory | An entry in the lpSdhOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.16.1.1 | ColumnlpSdhLosAlarm | read-only | mandatory | This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and acc… |
| 1.3.6.1.4.1.562.2.4.1.12.15.16.1.2 | ColumnlpSdhLofAlarm | read-only | mandatory | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accum… |
| 1.3.6.1.4.1.562.2.4.1.12.15.16.1.3 | ColumnlpSdhRxAisAlarm | read-only | mandatory | This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have b… |
| 1.3.6.1.4.1.562.2.4.1.12.15.16.1.4 | ColumnlpSdhRxRfiAlarm | read-only | mandatory | This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure … |
| 1.3.6.1.4.1.562.2.4.1.12.15.16.1.5 | ColumnlpSdhTxAis | read-only | mandatory | This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the… |
| 1.3.6.1.4.1.562.2.4.1.12.15.16.1.6 | ColumnlpSdhTxRdi | read-only | mandatory | This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon t… |
| 1.3.6.1.4.1.562.2.4.1.12.15.16.1.7 | ColumnlpSdhUnusableTxClockRefAlarm | read-only | mandatory | This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port p… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17 | TablelpSdhStatsTable | not-accessible | mandatory | This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reac… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1 | RowlpSdhStatsEntry | not-accessible | mandatory | An entry in the lpSdhStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.1 | ColumnlpSdhRunningTime | read-only | mandatory | This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts t… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.2 | ColumnlpSdhErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.3 | ColumnlpSdhSectCodeViolations | read-only | mandatory | This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for s… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.4 | ColumnlpSdhSectErroredSec | read-only | mandatory | This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or mo… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.5 | ColumnlpSdhSectSevErroredSec | read-only | mandatory | This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containin… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.6 | ColumnlpSdhSectLosSec | read-only | mandatory | This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or mo… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.7 | ColumnlpSdhSectSevErroredFrmSec | read-only | mandatory | This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals c… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.8 | ColumnlpSdhSectFailures | read-only | mandatory | This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.9 | ColumnlpSdhLineCodeViolations | read-only | mandatory | This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for sec… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.10 | ColumnlpSdhLineErroredSec | read-only | mandatory | This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.11 | ColumnlpSdhLineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.12 | ColumnlpSdhLineAisSec | read-only | mandatory | This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.13 | ColumnlpSdhLineUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.14 | ColumnlpSdhLineFailures | read-only | mandatory | This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.15 | ColumnlpSdhFarEndLineErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.16 | ColumnlpSdhFarEndLineCodeViolations | read-only | mandatory | This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.17 | ColumnlpSdhFarEndLineErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing … |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.18 | ColumnlpSdhFarEndLineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals … |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.19 | ColumnlpSdhFarEndLineAisSec | read-only | mandatory | This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.20 | ColumnlpSdhFarEndLineUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at th… |
| 1.3.6.1.4.1.562.2.4.1.12.15.17.1.21 | ColumnlpSdhFarEndLineFailures | read-only | mandatory | This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared. |
| 1.3.6.1.4.1.562.2.4.1.12.16 | NodelpJT2 | |||
| 1.3.6.1.4.1.562.2.4.1.12.16.1 | TablelpJT2RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpJT2 components. |
| 1.3.6.1.4.1.562.2.4.1.12.16.1.1 | RowlpJT2RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpJT2 component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.1.1.1 | ColumnlpJT2RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpJT2 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.16.1.1.2 | ColumnlpJT2ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.16.1.1.4 | ColumnlpJT2StorageType | read-only | mandatory | This variable represents the storage type value for the lpJT2 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.16.1.1.10 | ColumnlpJT2Index | not-accessible | mandatory | This variable represents the index for the lpJT2 tables. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2 | NodelpJT2Test | |||
| 1.3.6.1.4.1.562.2.4.1.12.16.2.1 | TablelpJT2TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpJT2Test components. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1 | RowlpJT2TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpJT2Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.1 | ColumnlpJT2TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpJT2Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.2 | ColumnlpJT2TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.4 | ColumnlpJT2TestStorageType | read-only | mandatory | This variable represents the storage type value for the lpJT2Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.10 | ColumnlpJT2TestIndex | not-accessible | mandatory | This variable represents the index for the lpJT2Test tables. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.10 | TablelpJT2TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.10.1 | RowlpJT2TestStateEntry | not-accessible | mandatory | An entry in the lpJT2TestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.1 | ColumnlpJT2TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.2 | ColumnlpJT2TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.3 | ColumnlpJT2TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11 | TablelpJT2TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1 | RowlpJT2TestSetupEntry | not-accessible | mandatory | An entry in the lpJT2TestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.1 | ColumnlpJT2TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.2 | ColumnlpJT2TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.3 | ColumnlpJT2TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.4 | ColumnlpJT2TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.5 | ColumnlpJT2TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.6 | ColumnlpJT2TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.7 | ColumnlpJT2TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.8 | ColumnlpJT2TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12 | TablelpJT2TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1 | RowlpJT2TestResultsEntry | not-accessible | mandatory | An entry in the lpJT2TestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.1 | ColumnlpJT2TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.2 | ColumnlpJT2TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.3 | ColumnlpJT2TestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.4 | ColumnlpJT2TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.5 | ColumnlpJT2TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.6 | ColumnlpJT2TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.7 | ColumnlpJT2TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.8 | ColumnlpJT2TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.9 | ColumnlpJT2TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.10 | ColumnlpJT2TestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.11 | ColumnlpJT2TestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3 | NodelpJT2Cell | |||
| 1.3.6.1.4.1.562.2.4.1.12.16.3.1 | TablelpJT2CellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpJT2Cell components. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1 | RowlpJT2CellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpJT2Cell component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.1 | ColumnlpJT2CellRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpJT2Cell components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.2 | ColumnlpJT2CellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.4 | ColumnlpJT2CellStorageType | read-only | mandatory | This variable represents the storage type value for the lpJT2Cell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.10 | ColumnlpJT2CellIndex | not-accessible | mandatory | This variable represents the index for the lpJT2Cell tables. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.10 | TablelpJT2CellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.10.1 | RowlpJT2CellProvEntry | not-accessible | mandatory | An entry in the lpJT2CellProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.1 | ColumnlpJT2CellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.2 | ColumnlpJT2CellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.3 | ColumnlpJT2CellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.11 | TablelpJT2CellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.11.1 | RowlpJT2CellOperEntry | not-accessible | mandatory | An entry in the lpJT2CellOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.11.1.1 | ColumnlpJT2CellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.12 | TablelpJT2CellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1 | RowlpJT2CellStatsEntry | not-accessible | mandatory | An entry in the lpJT2CellStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.1 | ColumnlpJT2CellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.2 | ColumnlpJT2CellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.3 | ColumnlpJT2CellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.4 | ColumnlpJT2CellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.5 | ColumnlpJT2CellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.2.4.1.12.16.10 | TablelpJT2CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.16.10.1 | RowlpJT2CidDataEntry | not-accessible | mandatory | An entry in the lpJT2CidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.10.1.1 | ColumnlpJT2CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.16.11 | TablelpJT2ProvTable | not-accessible | mandatory | This group contains all of the JT2 specific provisioning data for a JT2 component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.11.1 | RowlpJT2ProvEntry | not-accessible | mandatory | An entry in the lpJT2ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.11.1.1 | ColumnlpJT2ClockingSource | read-write | mandatory | This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates… |
| 1.3.6.1.4.1.562.2.4.1.12.16.11.1.2 | ColumnlpJT2LineLength | read-write | mandatory | This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet). |
| 1.3.6.1.4.1.562.2.4.1.12.16.11.1.3 | ColumnlpJT2ApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.12 | TablelpJT2IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.16.12.1 | RowlpJT2IfEntryEntry | not-accessible | mandatory | An entry in the lpJT2IfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.12.1.1 | ColumnlpJT2IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.16.12.1.2 | ColumnlpJT2IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.16.13 | TablelpJT2OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.16.13.1 | RowlpJT2OperStatusEntry | not-accessible | mandatory | An entry in the lpJT2OperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.13.1.1 | ColumnlpJT2SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14 | TablelpJT2StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1 | RowlpJT2StateEntry | not-accessible | mandatory | An entry in the lpJT2StateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.1 | ColumnlpJT2AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.2 | ColumnlpJT2OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.3 | ColumnlpJT2UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.4 | ColumnlpJT2AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.5 | ColumnlpJT2ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.6 | ColumnlpJT2ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.7 | ColumnlpJT2AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.8 | ColumnlpJT2StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.16.14.1.9 | ColumnlpJT2UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.16.15 | TablelpJT2OperTable | not-accessible | mandatory | This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1 | RowlpJT2OperEntry | not-accessible | mandatory | An entry in the lpJT2OperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.1 | ColumnlpJT2LosAlarm | read-only | mandatory | This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulate… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.2 | ColumnlpJT2LofAlarm | read-only | mandatory | This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.3 | ColumnlpJT2RxAisPhysicalAlarm | read-only | mandatory | This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumu… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.4 | ColumnlpJT2RxAisPayloadAlarm | read-only | mandatory | This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of … |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.5 | ColumnlpJT2RxRaiAlarm | read-only | mandatory | This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming J… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.6 | ColumnlpJT2TxAisPhysicalAlarm | read-only | mandatory | This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a … |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.7 | ColumnlpJT2TxRaiAlarm | read-only | mandatory | This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16 | TablelpJT2StatsTable | not-accessible | mandatory | This group contains the statistical data for a JT2 component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1 | RowlpJT2StatsEntry | not-accessible | mandatory | An entry in the lpJT2StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.1 | ColumnlpJT2RunningTime | read-only | mandatory | This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the o… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.2 | ColumnlpJT2ErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the JT2 port has been in an error free state. |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.3 | ColumnlpJT2ErroredSec | read-only | mandatory | This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Erro… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.4 | ColumnlpJT2SevErroredSec | read-only | mandatory | This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Vi… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.5 | ColumnlpJT2SevErroredFrmSec | read-only | mandatory | This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.6 | ColumnlpJT2UnavailSec | read-only | mandatory | This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consec… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.7 | ColumnlpJT2BpvErrors | read-only | mandatory | This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.8 | ColumnlpJT2CrcErrors | read-only | mandatory | This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.9 | ColumnlpJT2FrameErrors | read-only | mandatory | This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of th… |
| 1.3.6.1.4.1.562.2.4.1.12.16.16.1.10 | ColumnlpJT2LosStateChanges | read-only | mandatory | This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its … |
| 1.3.6.1.4.1.562.2.4.1.12.16.17 | TablelpJT2AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.16.17.1 | RowlpJT2AdminInfoEntry | not-accessible | mandatory | An entry in the lpJT2AdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.16.17.1.1 | ColumnlpJT2Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.16.17.1.2 | ColumnlpJT2CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.17 | NodelpHssi | |||
| 1.3.6.1.4.1.562.2.4.1.12.17.1 | TablelpHssiRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpHssi components. |
| 1.3.6.1.4.1.562.2.4.1.12.17.1.1 | RowlpHssiRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpHssi component. |
| 1.3.6.1.4.1.562.2.4.1.12.17.1.1.1 | ColumnlpHssiRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpHssi components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.17.1.1.2 | ColumnlpHssiComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.17.1.1.4 | ColumnlpHssiStorageType | read-only | mandatory | This variable represents the storage type value for the lpHssi tables. |
| 1.3.6.1.4.1.562.2.4.1.12.17.1.1.10 | ColumnlpHssiIndex | not-accessible | mandatory | This variable represents the index for the lpHssi tables. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2 | NodelpHssiTest | |||
| 1.3.6.1.4.1.562.2.4.1.12.17.2.1 | TablelpHssiTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpHssiTest components. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1 | RowlpHssiTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpHssiTest component. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.1 | ColumnlpHssiTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpHssiTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.2 | ColumnlpHssiTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.4 | ColumnlpHssiTestStorageType | read-only | mandatory | This variable represents the storage type value for the lpHssiTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.10 | ColumnlpHssiTestIndex | not-accessible | mandatory | This variable represents the index for the lpHssiTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.10 | TablelpHssiTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.10.1 | RowlpHssiTestStateEntry | not-accessible | mandatory | An entry in the lpHssiTestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.1 | ColumnlpHssiTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.2 | ColumnlpHssiTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.3 | ColumnlpHssiTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11 | TablelpHssiTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1 | RowlpHssiTestSetupEntry | not-accessible | mandatory | An entry in the lpHssiTestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.1 | ColumnlpHssiTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.2 | ColumnlpHssiTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.3 | ColumnlpHssiTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.4 | ColumnlpHssiTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.5 | ColumnlpHssiTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.6 | ColumnlpHssiTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.7 | ColumnlpHssiTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.8 | ColumnlpHssiTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12 | TablelpHssiTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1 | RowlpHssiTestResultsEntry | not-accessible | mandatory | An entry in the lpHssiTestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.1 | ColumnlpHssiTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.2 | ColumnlpHssiTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.3 | ColumnlpHssiTestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.4 | ColumnlpHssiTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.5 | ColumnlpHssiTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.6 | ColumnlpHssiTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.7 | ColumnlpHssiTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.8 | ColumnlpHssiTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.9 | ColumnlpHssiTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.10 | ColumnlpHssiTestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.11 | ColumnlpHssiTestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.17.10 | TablelpHssiProvTable | not-accessible | mandatory | This group contains the specific provisioning data for a Hssi component. |
| 1.3.6.1.4.1.562.2.4.1.12.17.10.1 | RowlpHssiProvEntry | not-accessible | mandatory | An entry in the lpHssiProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.10.1.1 | ColumnlpHssiLinkMode | read-write | mandatory | This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal… |
| 1.3.6.1.4.1.562.2.4.1.12.17.10.1.2 | ColumnlpHssiReadyLineState | read-write | mandatory | This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. … |
| 1.3.6.1.4.1.562.2.4.1.12.17.10.1.3 | ColumnlpHssiDataTransferLineState | read-write | mandatory | This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that b… |
| 1.3.6.1.4.1.562.2.4.1.12.17.10.1.5 | ColumnlpHssiLineSpeed | read-write | mandatory | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clo… |
| 1.3.6.1.4.1.562.2.4.1.12.17.10.1.7 | ColumnlpHssiApplicationFramerName | read-write | mandatory | This attribute contains the component name of a Framer which is associated with the Hssi component. |
| 1.3.6.1.4.1.562.2.4.1.12.17.11 | TablelpHssiCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.17.11.1 | RowlpHssiCidDataEntry | not-accessible | mandatory | An entry in the lpHssiCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.11.1.1 | ColumnlpHssiCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.17.12 | TablelpHssiAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.2.4.1.12.17.12.1 | RowlpHssiAdminInfoEntry | not-accessible | mandatory | An entry in the lpHssiAdminInfoTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.12.1.1 | ColumnlpHssiVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.17.12.1.2 | ColumnlpHssiCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.2.4.1.12.17.13 | TablelpHssiIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.12.17.13.1 | RowlpHssiIfEntryEntry | not-accessible | mandatory | An entry in the lpHssiIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.13.1.1 | ColumnlpHssiIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.12.17.13.1.2 | ColumnlpHssiIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.12.17.14 | TablelpHssiOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.12.17.14.1 | RowlpHssiOperStatusEntry | not-accessible | mandatory | An entry in the lpHssiOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.14.1.1 | ColumnlpHssiSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15 | TablelpHssiStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1 | RowlpHssiStateEntry | not-accessible | mandatory | An entry in the lpHssiStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.1 | ColumnlpHssiAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.2 | ColumnlpHssiOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.3 | ColumnlpHssiUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.4 | ColumnlpHssiAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.5 | ColumnlpHssiProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.6 | ColumnlpHssiControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.7 | ColumnlpHssiAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.8 | ColumnlpHssiStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.17.15.1.9 | ColumnlpHssiUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.17.16 | TablelpHssiOperTable | not-accessible | mandatory | This group contains all specific operational data for a Hssi component. |
| 1.3.6.1.4.1.562.2.4.1.12.17.16.1 | RowlpHssiOperEntry | not-accessible | mandatory | An entry in the lpHssiOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.17.16.1.1 | ColumnlpHssiActualLinkMode | read-only | mandatory | This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte… |
| 1.3.6.1.4.1.562.2.4.1.12.17.16.1.2 | ColumnlpHssiLineState | read-only | mandatory | This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4) |
| 1.3.6.1.4.1.562.2.4.1.12.17.16.1.3 | ColumnlpHssiActualTxLineSpeed | read-only | mandatory | This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s |
| 1.3.6.1.4.1.562.2.4.1.12.17.16.1.4 | ColumnlpHssiActualRxLineSpeed | read-only | mandatory | This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s |
| 1.3.6.1.4.1.562.2.4.1.12.17.16.1.5 | ColumnlpHssiDataXferStateChanges | read-only | mandatory | This attribute contains the number of times that the line has entered or exited the data transfer state. |
| 1.3.6.1.4.1.562.2.4.1.12.23 | NodelpEng | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.1 | TablelpEngRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEng components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.1.1 | RowlpEngRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEng component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.1.1.1 | ColumnlpEngRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpEng components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.1.1.2 | ColumnlpEngComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.1.1.4 | ColumnlpEngStorageType | read-only | mandatory | This variable represents the storage type value for the lpEng tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.1.1.10 | ColumnlpEngIndex | not-accessible | mandatory | This variable represents the index for the lpEng tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2 | NodelpEngDs | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.2.1 | TablelpEngDsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngDs components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1 | RowlpEngDsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngDs component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.1 | ColumnlpEngDsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngDs components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.2 | ColumnlpEngDsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.4 | ColumnlpEngDsStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngDs tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.10 | ColumnlpEngDsIndex | not-accessible | mandatory | This variable represents the index for the lpEngDs tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2 | NodelpEngDsOv | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1 | TablelpEngDsOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngDsOv components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1 | RowlpEngDsOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngDsOv component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.1 | ColumnlpEngDsOvRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngDsOv components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.2 | ColumnlpEngDsOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.4 | ColumnlpEngDsOvStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngDsOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.10 | ColumnlpEngDsOvIndex | not-accessible | mandatory | This variable represents the index for the lpEngDsOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.10 | TablelpEngDsOvProvTable | not-accessible | mandatory | This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1 | RowlpEngDsOvProvEntry | not-accessible | mandatory | An entry in the lpEngDsOvProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1.1 | ColumnlpEngDsOvAgentQueueSize | read-write | mandatory | This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, ref… |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.10 | TablelpEngDsOperTable | not-accessible | mandatory | This group contains operational attributes for the DataStream components under Lp Engineering. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.10.1 | RowlpEngDsOperEntry | not-accessible | mandatory | An entry in the lpEngDsOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.2.10.1.1 | ColumnlpEngDsAgentQueueSize | read-only | mandatory | This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's curr… |
| 1.3.6.1.4.1.562.2.4.1.12.100 | TablelpProvTable | not-accessible | mandatory | This Group contains the provisionable attributes for the LP component. |
| 1.3.6.1.4.1.562.2.4.1.12.100.1 | RowlpProvEntry | not-accessible | mandatory | An entry in the lpProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.100.1.1 | ColumnlpMainCard | read-write | mandatory | This is the preferred processor card on which this LP should be assigned. |
| 1.3.6.1.4.1.562.2.4.1.12.100.1.2 | ColumnlpSpareCard | read-write | mandatory | This is the spare processor card on which this LP should be assigned. |
| 1.3.6.1.4.1.562.2.4.1.12.100.1.3 | ColumnlpLogicalProcessorType | read-write | mandatory | This is the Logical Processor Type (LPT) that determines which software this LP will run. |
| 1.3.6.1.4.1.562.2.4.1.12.101 | TablelpCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.101.1 | RowlpCidDataEntry | not-accessible | mandatory | An entry in the lpCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.101.1.1 | ColumnlpCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.102 | TablelpStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.102.1 | RowlpStateEntry | not-accessible | mandatory | An entry in the lpStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.1 | ColumnlpAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.2 | ColumnlpOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.3 | ColumnlpUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.4 | ColumnlpAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.5 | ColumnlpProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.6 | ColumnlpControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.7 | ColumnlpAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.8 | ColumnlpStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.102.1.9 | ColumnlpUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.103 | TablelpOperTable | not-accessible | mandatory | This Group contains the operational attributes for the LP component. |
| 1.3.6.1.4.1.562.2.4.1.12.103.1 | RowlpOperEntry | not-accessible | mandatory | An entry in the lpOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.103.1.1 | ColumnlpActiveCard | read-only | mandatory | This attribute indicates on which card this LP is currently running (if any). |
| 1.3.6.1.4.1.562.2.4.1.12.103.1.2 | ColumnlpMainCardStatus | read-only | mandatory | This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned notAvailab… |
| 1.3.6.1.4.1.562.2.4.1.12.103.1.3 | ColumnlpSpareCardStatus | read-only | mandatory | This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned notAvail… |
| 1.3.6.1.4.1.562.2.4.1.12.103.1.4 | ColumnlpRestartOnCpSwitch | read-only | mandatory | This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains … |
| 1.3.6.1.4.1.562.2.4.1.12.103.1.5 | ColumnlpScheduledSwitchover | read-only | mandatory | This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00). |
| 1.3.6.1.4.1.562.2.4.1.12.104 | TablelpUtilTable | not-accessible | mandatory | This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are … |
| 1.3.6.1.4.1.562.2.4.1.12.104.1 | RowlpUtilEntry | not-accessible | mandatory | An entry in the lpUtilTable. |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.1 | ColumnlpTimeInterval | read-only | mandatory | This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to … |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.2 | ColumnlpCpuUtil | read-only | mandatory | This attribute indicates an approximation of the current processor utilization level (expressed as a percentage). |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.3 | ColumnlpCpuUtilAvg | read-only | mandatory | This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CP… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.4 | ColumnlpCpuUtilAvgMin | read-only | mandatory | This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averag… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.5 | ColumnlpCpuUtilAvgMax | read-only | mandatory | This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averag… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.6 | ColumnlpMsgBlockUsage | read-only | mandatory | This attribute indicates the processor's current shared message block memory utilization (in kilobytes). If there is no shared memory on the card, this attribu… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.7 | ColumnlpMsgBlockUsageAvg | read-only | mandatory | This attribute indicates the processor's average memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInter… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.8 | ColumnlpMsgBlockUsageAvgMin | read-only | mandatory | This attribute indicates the processor's minimum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInter… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.9 | ColumnlpMsgBlockUsageAvgMax | read-only | mandatory | This attribute indicates the processor's maximum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInter… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.10 | ColumnlpLocalMsgBlockUsage | read-only | mandatory | This attribute indicates the processor's current memory utilization (in kilobytes) of message blocks which are used for local messaging on the card. |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.11 | ColumnlpLocalMsgBlockUsageAvg | read-only | mandatory | This attribute indicates the processor's average memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a sp… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.12 | ColumnlpLocalMsgBlockUsageMin | read-only | mandatory | This attribute indicates the processor's minimum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a sp… |
| 1.3.6.1.4.1.562.2.4.1.12.104.1.13 | ColumnlpLocalMsgBlockUsageMax | read-only | mandatory | This attribute indicates the processor's maximum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a sp… |
| 1.3.6.1.4.1.562.2.4.1.12.105 | TablelpCapTable | not-accessible | mandatory | This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are rep… |
| 1.3.6.1.4.1.562.2.4.1.12.105.1 | RowlpCapEntry | not-accessible | mandatory | An entry in the lpCapTable. |
| 1.3.6.1.4.1.562.2.4.1.12.105.1.1 | ColumnlpMsgBlockCapacity | read-only | mandatory | This attribute indicates the processor card's shared message block memory capacity (in kilobytes). |
| 1.3.6.1.4.1.562.2.4.1.12.105.1.2 | ColumnlpLocalMsgBlockCapacity | read-only | mandatory | This attribute indicates the processor card's local message block memory capacity (in kilobytes). These message blocks are used for local messaging on the card. |
| 1.3.6.1.4.1.562.2.4.1.12.242 | TablelpLinkToApplicationsTable | not-accessible | mandatory | This attribute allows applications to link themselves directly to the LP component. |
| 1.3.6.1.4.1.562.2.4.1.12.242.1 | RowlpLinkToApplicationsEntry | not-accessible | mandatory | An entry in the lpLinkToApplicationsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.242.1.1 | ColumnlpLinkToApplicationsValue | read-only | mandatory | This variable represents both the value and the index for the lpLinkToApplicationsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.244 | TablelpMemoryCapacityTable | not-accessible | mandatory | This attribute indicates the processor card's memory capacity (in kilobytes) for each type of memory. |
| 1.3.6.1.4.1.562.2.4.1.12.244.1 | RowlpMemoryCapacityEntry | not-accessible | mandatory | An entry in the lpMemoryCapacityTable. |
| 1.3.6.1.4.1.562.2.4.1.12.244.1.1 | ColumnlpMemoryCapacityIndex | not-accessible | mandatory | This variable represents the lpMemoryCapacityTable specific index for the lpMemoryCapacityTable. |
| 1.3.6.1.4.1.562.2.4.1.12.244.1.2 | ColumnlpMemoryCapacityValue | read-only | mandatory | This variable represents an individual value for the lpMemoryCapacityTable. |
| 1.3.6.1.4.1.562.2.4.1.12.245 | TablelpMemoryUsageTable | not-accessible | mandatory | This attribute indicates the processor's current memory utilization (in kilobytes) for each type of memory. |
| 1.3.6.1.4.1.562.2.4.1.12.245.1 | RowlpMemoryUsageEntry | not-accessible | mandatory | An entry in the lpMemoryUsageTable. |
| 1.3.6.1.4.1.562.2.4.1.12.245.1.1 | ColumnlpMemoryUsageIndex | not-accessible | mandatory | This variable represents the lpMemoryUsageTable specific index for the lpMemoryUsageTable. |
| 1.3.6.1.4.1.562.2.4.1.12.245.1.2 | ColumnlpMemoryUsageValue | read-only | mandatory | This variable represents an individual value for the lpMemoryUsageTable. |
| 1.3.6.1.4.1.562.2.4.1.12.276 | TablelpMemoryUsageAvgTable | not-accessible | mandatory | This attribute indicates the processor's average memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This val… |
| 1.3.6.1.4.1.562.2.4.1.12.276.1 | RowlpMemoryUsageAvgEntry | not-accessible | mandatory | An entry in the lpMemoryUsageAvgTable. |
| 1.3.6.1.4.1.562.2.4.1.12.276.1.1 | ColumnlpMemoryUsageAvgIndex | not-accessible | mandatory | This variable represents the lpMemoryUsageAvgTable specific index for the lpMemoryUsageAvgTable. |
| 1.3.6.1.4.1.562.2.4.1.12.276.1.2 | ColumnlpMemoryUsageAvgValue | read-only | mandatory | This variable represents an individual value for the lpMemoryUsageAvgTable. |
| 1.3.6.1.4.1.562.2.4.1.12.277 | TablelpMemoryUsageAvgMinTable | not-accessible | mandatory | This attribute indicates the processor's minimum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This val… |
| 1.3.6.1.4.1.562.2.4.1.12.277.1 | RowlpMemoryUsageAvgMinEntry | not-accessible | mandatory | An entry in the lpMemoryUsageAvgMinTable. |
| 1.3.6.1.4.1.562.2.4.1.12.277.1.1 | ColumnlpMemoryUsageAvgMinIndex | not-accessible | mandatory | This variable represents the lpMemoryUsageAvgMinTable specific index for the lpMemoryUsageAvgMinTable. |
| 1.3.6.1.4.1.562.2.4.1.12.277.1.2 | ColumnlpMemoryUsageAvgMinValue | read-only | mandatory | This variable represents an individual value for the lpMemoryUsageAvgMinTable. |
| 1.3.6.1.4.1.562.2.4.1.12.278 | TablelpMemoryUsageAvgMaxTable | not-accessible | mandatory | This attribute indicates the processor's maximum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This val… |
| 1.3.6.1.4.1.562.2.4.1.12.278.1 | RowlpMemoryUsageAvgMaxEntry | not-accessible | mandatory | An entry in the lpMemoryUsageAvgMaxTable. |
| 1.3.6.1.4.1.562.2.4.1.12.278.1.1 | ColumnlpMemoryUsageAvgMaxIndex | not-accessible | mandatory | This variable represents the lpMemoryUsageAvgMaxTable specific index for the lpMemoryUsageAvgMaxTable. |
| 1.3.6.1.4.1.562.2.4.1.12.278.1.2 | ColumnlpMemoryUsageAvgMaxValue | read-only | mandatory | This variable represents an individual value for the lpMemoryUsageAvgMaxTable. |
| 1.3.6.1.4.1.562.2.4.2.11 | NodelogicalProcessorMIB | |||
| 1.3.6.1.4.1.562.2.4.2.11.1 | NodelogicalProcessorGroup | |||
| 1.3.6.1.4.1.562.2.4.2.11.1.5 | NodelogicalProcessorGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.11.1.5.2 | NodelogicalProcessorGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.11.1.5.2.2 | NodelogicalProcessorGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.11.3 | NodelogicalProcessorCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.11.3.5 | NodelogicalProcessorCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.11.3.5.2 | NodelogicalProcessorCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.11.3.5.2.2 | NodelogicalProcessorCapabilitiesBE01A |