Nortel-Magellan-Passport-PppMIB
201 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.102 | Nodeppp | |||
| 1.3.6.1.4.1.562.2.4.1.102.1 | TablepppRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of ppp components. |
| 1.3.6.1.4.1.562.2.4.1.102.1.1 | RowpppRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single ppp component. |
| 1.3.6.1.4.1.562.2.4.1.102.1.1.1 | ColumnpppRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of ppp components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.102.1.1.2 | ColumnpppComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.102.1.1.4 | ColumnpppStorageType | read-only | mandatory | This variable represents the storage type value for the ppp tables. |
| 1.3.6.1.4.1.562.2.4.1.102.1.1.10 | ColumnpppIndex | not-accessible | mandatory | This variable represents the index for the ppp tables. |
| 1.3.6.1.4.1.562.2.4.1.102.2 | NodepppLnk | |||
| 1.3.6.1.4.1.562.2.4.1.102.2.1 | TablepppLnkRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of pppLnk components. |
| 1.3.6.1.4.1.562.2.4.1.102.2.1.1 | RowpppLnkRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single pppLnk component. |
| 1.3.6.1.4.1.562.2.4.1.102.2.1.1.1 | ColumnpppLnkRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of pppLnk components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.102.2.1.1.2 | ColumnpppLnkComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.102.2.1.1.4 | ColumnpppLnkStorageType | read-only | mandatory | This variable represents the storage type value for the pppLnk tables. |
| 1.3.6.1.4.1.562.2.4.1.102.2.1.1.10 | ColumnpppLnkIndex | not-accessible | mandatory | This variable represents the index for the pppLnk tables. |
| 1.3.6.1.4.1.562.2.4.1.102.2.10 | TablepppLnkProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the Ppp Link component. |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1 | RowpppLnkProvEntry | not-accessible | mandatory | An entry in the pppLnkProvTable. |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.1 | ColumnpppLnkConfigInitialMru | read-write | mandatory | This is the initial Maximum Receive Unit (Mru) that the local Ppp entity will advertise to the remote entity. A change to this attribute will not take effect u… |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.4 | ColumnpppLnkConfigMagicNumber | read-write | mandatory | If enabled then the local node will attempt to perform Magic Number negotiation with the remote node. If disabled then this negotiation is not performed. In an… |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.6 | ColumnpppLnkRestartTimer | read-write | mandatory | This is the time, in milliseconds, that Ppp will wait for a response to a configure request or a terminate request before retrying. |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.7 | ColumnpppLnkContinuityMonitor | read-write | mandatory | This attribute turns on/off (enabled/disabled) the Link Continuity Monitor. If set to enabled, periodic keep alive echo packet will be sent over the Ppp link. … |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.8 | ColumnpppLnkNegativeAckTries | read-write | mandatory | This attribute specifies the maximum negative acknowledgments sent to the remote Ppp entity during negotiation before defaulting it's configuration parameters. |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.9 | ColumnpppLnkQualityThreshold | read-write | mandatory | This attribute specifies the minimum allowed line quality before the line is considered too poor to continue operation. The value for this attribute is a perce… |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.10 | ColumnpppLnkQualityWindow | read-write | mandatory | This attribute specifies the number of seconds used for sampling line quality. If line quality drops below the level set with the qualityThreshold attribute du… |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.11 | ColumnpppLnkTerminateRequestTries | read-write | mandatory | This attribute specifies the maximum terminate requests to be sent, when closing the connection, and not answered before this instance of Ppp enters a closing … |
| 1.3.6.1.4.1.562.2.4.1.102.2.10.1.12 | ColumnpppLnkConfigureRequestTries | read-write | mandatory | This attribute specifies the number of configuration requests that will be sent out and not answered before this instance of Ppp enters a listening state. If b… |
| 1.3.6.1.4.1.562.2.4.1.102.2.11 | TablepppLnkOperTable | not-accessible | mandatory | This group contains the Ppp Link Operational attributes. |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1 | RowpppLnkOperEntry | not-accessible | mandatory | An entry in the pppLnkOperTable. |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.1 | ColumnpppLnkOperState | read-only | mandatory | This is the operational state of the Link Control Protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.2 | ColumnpppLnkLineCondition | read-only | mandatory | This attribute describes the condition of the physical line that Ppp is running over. ok: The condition of the line is good. looped: The line is looped back on… |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.4 | ColumnpppLnkBadAddresses | read-only | mandatory | This attribute counts the number of packets received with an incorrect Address Field. If this count is going up quickly, it could indicate that there is a line… |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.5 | ColumnpppLnkBadControls | read-only | mandatory | This attribute counts the number of packets received on this link with an incorrect Control Field. If this count is going up quickly, it could indicate that th… |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.6 | ColumnpppLnkPacketTooLongs | read-only | mandatory | This attribute counts the number of packets received that have been discarded because their length exceeded the Maximum Receive Unit (Mru). This counter will w… |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.7 | ColumnpppLnkBadFcss | read-only | mandatory | This attribute counts the number of packets received that have been discarded due to having an incorrect Frame Check Sequence (Fcs). This counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.8 | ColumnpppLnkLocalMru | read-only | mandatory | This is the current value of the Maximum Receive Unit (Mru) for the local Ppp Entity. This value is the Mru that the remote entity is using when sending packet… |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.9 | ColumnpppLnkRemoteMru | read-only | mandatory | This is the current value of the Maximum Receive Unit (Mru) for the remote Ppp entity. This value is the Mru that the local entity is using when sending packet… |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.16 | ColumnpppLnkTransmitFcsSize | read-only | mandatory | This is the size of the Frame Check Sequence (Fcs) in bits that the local node will generate when sending packets to the remote node. |
| 1.3.6.1.4.1.562.2.4.1.102.2.11.1.17 | ColumnpppLnkReceiveFcsSize | read-only | mandatory | This is the size of the Frame Check Sequence (Fcs) in bits that the remote node will generate when sending packets to the local node. |
| 1.3.6.1.4.1.562.2.4.1.102.3 | NodepppLqm | |||
| 1.3.6.1.4.1.562.2.4.1.102.3.1 | TablepppLqmRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of pppLqm components. |
| 1.3.6.1.4.1.562.2.4.1.102.3.1.1 | RowpppLqmRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single pppLqm component. |
| 1.3.6.1.4.1.562.2.4.1.102.3.1.1.1 | ColumnpppLqmRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of pppLqm components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.102.3.1.1.2 | ColumnpppLqmComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.102.3.1.1.4 | ColumnpppLqmStorageType | read-only | mandatory | This variable represents the storage type value for the pppLqm tables. |
| 1.3.6.1.4.1.562.2.4.1.102.3.1.1.10 | ColumnpppLqmIndex | not-accessible | mandatory | This variable represents the index for the pppLqm tables. |
| 1.3.6.1.4.1.562.2.4.1.102.3.10 | TablepppLqmProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the Ppp Link Quality Monitor component. |
| 1.3.6.1.4.1.562.2.4.1.102.3.10.1 | RowpppLqmProvEntry | not-accessible | mandatory | An entry in the pppLqmProvTable. |
| 1.3.6.1.4.1.562.2.4.1.102.3.10.1.1 | ColumnpppLqmConfigPeriod | read-write | mandatory | This is the Lqm reporting period that the local Ppp entity will attempt to negotiate with the remote entity, in units of hundredths of a second. A value of '0'… |
| 1.3.6.1.4.1.562.2.4.1.102.3.10.1.2 | ColumnpppLqmConfigStatus | read-write | mandatory | If this attribute is enabled, the local node will attempt to perform Lqm negotiation with the remote node. If it is disabled then this negotiation is not perfo… |
| 1.3.6.1.4.1.562.2.4.1.102.3.11 | TablepppLqmOperTable | not-accessible | mandatory | This group contains the operational attributes for the Ppp Link Quality Monitor component. |
| 1.3.6.1.4.1.562.2.4.1.102.3.11.1 | RowpppLqmOperEntry | not-accessible | mandatory | An entry in the pppLqmOperTable. |
| 1.3.6.1.4.1.562.2.4.1.102.3.11.1.1 | ColumnpppLqmQuality | read-only | mandatory | This is the current quality of the link as declared by the local Ppp entity's Link-Quality Management modules. A value of good indicates that LinkQualityMonito… |
| 1.3.6.1.4.1.562.2.4.1.102.3.11.1.2 | ColumnpppLqmInGoodOctets | read-only | mandatory | This attribute counts the number of good octets received. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.102.3.11.1.3 | ColumnpppLqmLocalPeriod | read-only | mandatory | This is the Lqm reporting period, in hundredths of a second that is in effect for the local Ppp entity. |
| 1.3.6.1.4.1.562.2.4.1.102.3.11.1.4 | ColumnpppLqmRemotePeriod | read-only | mandatory | This is the Lqm reporting period, in hundredths of a second, that is in effect for the remote Ppp entity. |
| 1.3.6.1.4.1.562.2.4.1.102.3.11.1.5 | ColumnpppLqmOutLqrs | read-only | mandatory | This attribute counts the number of link quality reports sent out. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.102.3.11.1.6 | ColumnpppLqmInLqrs | read-only | mandatory | This attribute counts the number of link quality reports received. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.102.4 | NodepppNcp | |||
| 1.3.6.1.4.1.562.2.4.1.102.4.1 | TablepppNcpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of pppNcp components. |
| 1.3.6.1.4.1.562.2.4.1.102.4.1.1 | RowpppNcpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single pppNcp component. |
| 1.3.6.1.4.1.562.2.4.1.102.4.1.1.1 | ColumnpppNcpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of pppNcp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.102.4.1.1.2 | ColumnpppNcpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.102.4.1.1.4 | ColumnpppNcpStorageType | read-only | mandatory | This variable represents the storage type value for the pppNcp tables. |
| 1.3.6.1.4.1.562.2.4.1.102.4.1.1.10 | ColumnpppNcpIndex | not-accessible | mandatory | This variable represents the index for the pppNcp tables. |
| 1.3.6.1.4.1.562.2.4.1.102.4.2 | NodepppNcpBmcEntry | |||
| 1.3.6.1.4.1.562.2.4.1.102.4.2.1 | TablepppNcpBmcEntryRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of pppNcpBmcEntry components. |
| 1.3.6.1.4.1.562.2.4.1.102.4.2.1.1 | RowpppNcpBmcEntryRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single pppNcpBmcEntry component. |
| 1.3.6.1.4.1.562.2.4.1.102.4.2.1.1.1 | ColumnpppNcpBmcEntryRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of pppNcpBmcEntry components. These components can be added. |
| 1.3.6.1.4.1.562.2.4.1.102.4.2.1.1.2 | ColumnpppNcpBmcEntryComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.102.4.2.1.1.4 | ColumnpppNcpBmcEntryStorageType | read-only | mandatory | This variable represents the storage type value for the pppNcpBmcEntry tables. |
| 1.3.6.1.4.1.562.2.4.1.102.4.2.1.1.10 | ColumnpppNcpBmcEntryMacTypeIndex | not-accessible | mandatory | This variable represents the index for the pppNcpBmcEntry tables. |
| 1.3.6.1.4.1.562.2.4.1.102.4.2.10 | TablepppNcpBmcEntryProvTable | not-accessible | mandatory | This group contains the attributes for one entry in the BridgeMediaConfigEntry table. |
| 1.3.6.1.4.1.562.2.4.1.102.4.2.10.1 | RowpppNcpBmcEntryProvEntry | not-accessible | mandatory | An entry in the pppNcpBmcEntryProvTable. |
| 1.3.6.1.4.1.562.2.4.1.102.4.2.10.1.1 | ColumnpppNcpBmcEntryLocalStatus | read-write | mandatory | This attribute indicates whether the local Ppp bridging entity should accept packets of the protocol type identified by the instance value of this component. S… |
| 1.3.6.1.4.1.562.2.4.1.102.4.3 | NodepppNcpBmEntry | |||
| 1.3.6.1.4.1.562.2.4.1.102.4.3.1 | TablepppNcpBmEntryRowStatusTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of pppNcpBmEntry components. |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.1.1 | RowpppNcpBmEntryRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single pppNcpBmEntry component. |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.1.1.1 | ColumnpppNcpBmEntryRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of pppNcpBmEntry components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.1.1.2 | ColumnpppNcpBmEntryComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.1.1.4 | ColumnpppNcpBmEntryStorageType | read-only | mandatory | This variable represents the storage type value for the pppNcpBmEntry tables. |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.1.1.10 | ColumnpppNcpBmEntryMacTypeIndex | not-accessible | mandatory | This variable represents the index for the pppNcpBmEntry tables. |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.10 | TablepppNcpBmEntryOperTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the attributes for one entry in the BridgeMediaEntry table. |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.10.1 | RowpppNcpBmEntryOperEntry | not-accessible | mandatory | An entry in the pppNcpBmEntryOperTable. |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.10.1.2 | ColumnpppNcpBmEntryLocalStatus | read-only | mandatory | This attribute indicates whether the local Ppp bridging entity will accept packets of the protocol type identified by the instance value of this component. A v… |
| 1.3.6.1.4.1.562.2.4.1.102.4.3.10.1.3 | ColumnpppNcpBmEntryRemoteStatus | read-only | mandatory | This attribute indicates whether the remote Ppp bridging entity will accept packets of the protocol type identified by the instance value of this component. A … |
| 1.3.6.1.4.1.562.2.4.1.102.4.11 | TablepppNcpBprovTable | not-accessible | mandatory | This group contains the provisioned attributes for the Bridge Network Control Protocol. |
| 1.3.6.1.4.1.562.2.4.1.102.4.11.1 | RowpppNcpBprovEntry | not-accessible | mandatory | An entry in the pppNcpBprovTable. |
| 1.3.6.1.4.1.562.2.4.1.102.4.11.1.1 | ColumnpppNcpBConfigTinygram | read-write | mandatory | If this attribute is set to disabled then the local Bridge Network Control Protocol (Bncp) entity will not initiate the tinygram compression option negotiation… |
| 1.3.6.1.4.1.562.2.4.1.102.4.11.1.4 | ColumnpppNcpBConfigLanId | read-write | mandatory | If this attribute is set to disabled then the local Bncp entity will not initiate the lan identification option negotiation. If it is enabled then the local Bn… |
| 1.3.6.1.4.1.562.2.4.1.102.4.12 | TablepppNcpIpOperTable | not-accessible | mandatory | This group contains the Ip Network Control Protocol operational attributes. |
| 1.3.6.1.4.1.562.2.4.1.102.4.12.1 | RowpppNcpIpOperEntry | not-accessible | mandatory | An entry in the pppNcpIpOperTable. |
| 1.3.6.1.4.1.562.2.4.1.102.4.12.1.1 | ColumnpppNcpIpOperState | read-only | mandatory | This is the operational state of the Ip network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.2.4.1.102.4.14 | TablepppNcpBoperTable | not-accessible | mandatory | This group contains the Bridge Network Control Protocol operational attributes. |
| 1.3.6.1.4.1.562.2.4.1.102.4.14.1 | RowpppNcpBoperEntry | not-accessible | mandatory | An entry in the pppNcpBoperTable. |
| 1.3.6.1.4.1.562.2.4.1.102.4.14.1.1 | ColumnpppNcpBOperState | read-only | mandatory | This is the operational status of the bridge network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.2.4.1.102.4.14.1.3 | ColumnpppNcpBLocalToRemoteTinygramComp | read-only | mandatory | This attribute indicates whether the local node will perform tinygram compression when sending packets to the remote entity. If it is disabled then the local e… |
| 1.3.6.1.4.1.562.2.4.1.102.4.14.1.4 | ColumnpppNcpBRemoteToLocalTinygramComp | read-only | mandatory | If this attribute is disabled then the remote entity is not expected to perform tinygram compression. If it is enabled then the remote entity is expected to pe… |
| 1.3.6.1.4.1.562.2.4.1.102.4.14.1.5 | ColumnpppNcpBLocalToRemoteLanId | read-only | mandatory | This attribute indicates whether the local node will include the lan identification field in transmitted packets or not. If it is disabled then the local node … |
| 1.3.6.1.4.1.562.2.4.1.102.4.14.1.6 | ColumnpppNcpBRemoteToLocalLanId | read-only | mandatory | This attribute indicates whether the remote node has indicated that it will include the lan identification field in transmitted packets or not. If it is disabl… |
| 1.3.6.1.4.1.562.2.4.1.102.4.16 | TablepppNcpOperTable | not-accessible | mandatory | This group contains the operational attributes for any Network Control Protocols other than Ip and Bridge. |
| 1.3.6.1.4.1.562.2.4.1.102.4.16.1 | RowpppNcpOperEntry | not-accessible | mandatory | An entry in the pppNcpOperTable. |
| 1.3.6.1.4.1.562.2.4.1.102.4.16.1.1 | ColumnpppNcpAppletalkOperState | read-only | mandatory | This is the operational state of the AppleTalk network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.2.4.1.102.4.16.1.2 | ColumnpppNcpIpxOperState | read-only | mandatory | This is the operational state of the Ipx network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.2.4.1.102.4.16.1.3 | ColumnpppNcpXnsOperState | read-only | mandatory | This is the operational state of the Xns network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.2.4.1.102.4.16.1.4 | ColumnpppNcpDecnetOperState | read-only | mandatory | This is the operational state of the DecNet network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.2.4.1.102.5 | NodepppFramer | |||
| 1.3.6.1.4.1.562.2.4.1.102.5.1 | TablepppFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of pppFramer components. |
| 1.3.6.1.4.1.562.2.4.1.102.5.1.1 | RowpppFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single pppFramer component. |
| 1.3.6.1.4.1.562.2.4.1.102.5.1.1.1 | ColumnpppFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of pppFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.102.5.1.1.2 | ColumnpppFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.102.5.1.1.4 | ColumnpppFramerStorageType | read-only | mandatory | This variable represents the storage type value for the pppFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.102.5.1.1.10 | ColumnpppFramerIndex | not-accessible | mandatory | This variable represents the index for the pppFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.102.5.10 | TablepppFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.102.5.10.1 | RowpppFramerProvEntry | not-accessible | mandatory | An entry in the pppFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.102.5.10.1.1 | ColumnpppFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the logical processor on which F… |
| 1.3.6.1.4.1.562.2.4.1.102.5.12 | TablepppFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.102.5.12.1 | RowpppFramerStateEntry | not-accessible | mandatory | An entry in the pppFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.102.5.12.1.1 | ColumnpppFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.102.5.12.1.2 | ColumnpppFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.102.5.12.1.3 | ColumnpppFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.102.5.13 | TablepppFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1 | RowpppFramerStatsEntry | not-accessible | mandatory | An entry in the pppFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.1 | ColumnpppFramerFrmToIf | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly t… |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.2 | ColumnpppFramerFrmFromIf | read-only | mandatory | This attribute counts the number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.3 | ColumnpppFramerAborts | read-only | mandatory | This attribute counts the total number of aborts received. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.4 | ColumnpppFramerCrcErrors | read-only | mandatory | This attribute counts the total number of frames with CRC errors. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.5 | ColumnpppFramerLrcErrors | read-only | mandatory | This attribute counts the total number of frames with LRC errors. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.6 | ColumnpppFramerNonOctetErrors | read-only | mandatory | This attribute counts the total number of frames that were non octet aligned. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.7 | ColumnpppFramerOverruns | read-only | mandatory | This attribute counts the total number of frames received from the link for which overruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.8 | ColumnpppFramerUnderruns | read-only | mandatory | This attribute counts the total number of frames transmitted to the link for which underruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.102.5.13.1.9 | ColumnpppFramerLargeFrmErrors | read-only | mandatory | This attribute counts the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it con… |
| 1.3.6.1.4.1.562.2.4.1.102.5.14 | TablepppFramerUtilTable | not-accessible | mandatory | This group contains the link utilizaiton operational data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.102.5.14.1 | RowpppFramerUtilEntry | not-accessible | mandatory | An entry in the pppFramerUtilTable. |
| 1.3.6.1.4.1.562.2.4.1.102.5.14.1.1 | ColumnpppFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal priority data sent to the link as a percentage of the available bandwidth on the link. The utilization is the a… |
| 1.3.6.1.4.1.562.2.4.1.102.5.14.1.3 | ColumnpppFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal priority data received from the link as a percentage of the available bandwidth on the link. The utilization is… |
| 1.3.6.1.4.1.562.2.4.1.102.6 | NodepppLeq | |||
| 1.3.6.1.4.1.562.2.4.1.102.6.1 | TablepppLeqRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of pppLeq components. |
| 1.3.6.1.4.1.562.2.4.1.102.6.1.1 | RowpppLeqRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single pppLeq component. |
| 1.3.6.1.4.1.562.2.4.1.102.6.1.1.1 | ColumnpppLeqRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of pppLeq components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.102.6.1.1.2 | ColumnpppLeqComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.102.6.1.1.4 | ColumnpppLeqStorageType | read-only | mandatory | This variable represents the storage type value for the pppLeq tables. |
| 1.3.6.1.4.1.562.2.4.1.102.6.1.1.10 | ColumnpppLeqIndex | not-accessible | mandatory | This variable represents the index for the pppLeq tables. |
| 1.3.6.1.4.1.562.2.4.1.102.6.10 | TablepppLeqProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the LinkEmissionQueue component. |
| 1.3.6.1.4.1.562.2.4.1.102.6.10.1 | RowpppLeqProvEntry | not-accessible | mandatory | An entry in the pppLeqProvTable. |
| 1.3.6.1.4.1.562.2.4.1.102.6.10.1.1 | ColumnpppLeqMaxPackets | read-write | mandatory | This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of p… |
| 1.3.6.1.4.1.562.2.4.1.102.6.10.1.2 | ColumnpppLeqMaxMsecData | read-write | mandatory | This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be cal… |
| 1.3.6.1.4.1.562.2.4.1.102.6.10.1.3 | ColumnpppLeqMaxPercentMulticast | read-write | mandatory | This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated val… |
| 1.3.6.1.4.1.562.2.4.1.102.6.10.1.4 | ColumnpppLeqTimeToLive | read-write | mandatory | This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded. |
| 1.3.6.1.4.1.562.2.4.1.102.6.11 | TablepppLeqStatsTable | not-accessible | mandatory | This group contains Link Emission Queue general statistics. |
| 1.3.6.1.4.1.562.2.4.1.102.6.11.1 | RowpppLeqStatsEntry | not-accessible | mandatory | An entry in the pppLeqStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.102.6.11.1.1 | ColumnpppLeqTimedOutPkt | read-only | mandatory | This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its ma… |
| 1.3.6.1.4.1.562.2.4.1.102.6.11.1.2 | ColumnpppLeqHardwareForcedPkt | read-only | mandatory | This attribute counts the number of hardware forced packets on this instance of Ppp. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.102.6.11.1.4 | ColumnpppLeqForcedPktDiscards | read-only | mandatory | This attribute counts the total number of hardware forced packets that had to be discarded due to link failure. This counter will wrap around to 0 when it exce… |
| 1.3.6.1.4.1.562.2.4.1.102.6.11.1.5 | ColumnpppLeqQueuePurgeDiscards | read-only | mandatory | This attribute counts the total number of packets discarded by a queue purge (i.e. a discarding of all packets on the queue). This counter will wrap around to … |
| 1.3.6.1.4.1.562.2.4.1.102.6.12 | TablepppLeqTStatsTable | not-accessible | mandatory | This group contains Link Emission Queue total statistics. |
| 1.3.6.1.4.1.562.2.4.1.102.6.12.1 | RowpppLeqTStatsEntry | not-accessible | mandatory | An entry in the pppLeqTStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.102.6.12.1.1 | ColumnpppLeqTotalPktHandled | read-only | mandatory | This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.102.6.12.1.2 | ColumnpppLeqTotalPktForwarded | read-only | mandatory | This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.2.4.1.102.6.12.1.3 | ColumnpppLeqTotalPktQueued | read-only | mandatory | This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it excee… |
| 1.3.6.1.4.1.562.2.4.1.102.6.12.1.4 | ColumnpppLeqTotalMulticastPkt | read-only | mandatory | This attribute counts the total number of multicast packets handled by this instance of Ppp. This counter will wrap around to 0 when it exceeds its maximum cou… |
| 1.3.6.1.4.1.562.2.4.1.102.6.12.1.8 | ColumnpppLeqTotalPktDiscards | read-only | mandatory | This attribute counts the total number of packets that were discarded for this instance of Ppp. This is the sum of timedOutPkt, forcedPktDiscards, queuePurgeDi… |
| 1.3.6.1.4.1.562.2.4.1.102.6.13 | TablepppLeqCStatsTable | not-accessible | mandatory | This group contains Link Emission Queue current statistics. |
| 1.3.6.1.4.1.562.2.4.1.102.6.13.1 | RowpppLeqCStatsEntry | not-accessible | mandatory | An entry in the pppLeqCStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.102.6.13.1.1 | ColumnpppLeqCurrentPktQueued | read-only | mandatory | This attribute counts the current number of packets queued. |
| 1.3.6.1.4.1.562.2.4.1.102.6.13.1.2 | ColumnpppLeqCurrentBytesQueued | read-only | mandatory | This attribute counts the current number of bytes queued. |
| 1.3.6.1.4.1.562.2.4.1.102.6.13.1.3 | ColumnpppLeqCurrentMulticastQueued | read-only | mandatory | This attribute counts the current number of multicast packets in the queue. |
| 1.3.6.1.4.1.562.2.4.1.102.6.14 | TablepppLeqThrStatsTable | not-accessible | mandatory | This group contains Link Emission Queue threshold statistics. |
| 1.3.6.1.4.1.562.2.4.1.102.6.14.1 | RowpppLeqThrStatsEntry | not-accessible | mandatory | An entry in the pppLeqThrStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.102.6.14.1.1 | ColumnpppLeqQueuePktThreshold | read-only | mandatory | This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will … |
| 1.3.6.1.4.1.562.2.4.1.102.6.14.1.2 | ColumnpppLeqPktThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maxim… |
| 1.3.6.1.4.1.562.2.4.1.102.6.14.1.3 | ColumnpppLeqQueueByteThreshold | read-only | mandatory | This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate. |
| 1.3.6.1.4.1.562.2.4.1.102.6.14.1.4 | ColumnpppLeqByteThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maxi… |
| 1.3.6.1.4.1.562.2.4.1.102.6.14.1.5 | ColumnpppLeqQueueMulticastThreshold | read-only | mandatory | This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets. |
| 1.3.6.1.4.1.562.2.4.1.102.6.14.1.6 | ColumnpppLeqMulThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its… |
| 1.3.6.1.4.1.562.2.4.1.102.6.14.1.7 | ColumnpppLeqMemThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq … |
| 1.3.6.1.4.1.562.2.4.1.102.20 | TablepppCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.102.20.1 | RowpppCidDataEntry | not-accessible | mandatory | An entry in the pppCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.102.20.1.1 | ColumnpppCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.102.21 | TablepppIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.102.21.1 | RowpppIfEntryEntry | not-accessible | mandatory | An entry in the pppIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.102.21.1.1 | ColumnpppIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.102.21.1.2 | ColumnpppIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.102.22 | TablepppMpTable | not-accessible | mandatory | This group contains the base provisioning data for the Media Application component. |
| 1.3.6.1.4.1.562.2.4.1.102.22.1 | RowpppMpEntry | not-accessible | mandatory | An entry in the pppMpTable. |
| 1.3.6.1.4.1.562.2.4.1.102.22.1.1 | ColumnpppLinkToProtocolPort | read-write | mandatory | This attribute contains a protocol port component name. The attribute associates the application with a protocol port. |
| 1.3.6.1.4.1.562.2.4.1.102.23 | TablepppStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.102.23.1 | RowpppStateEntry | not-accessible | mandatory | An entry in the pppStateTable. |
| 1.3.6.1.4.1.562.2.4.1.102.23.1.1 | ColumnpppAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.102.23.1.2 | ColumnpppOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.102.23.1.3 | ColumnpppUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.102.24 | TablepppOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.102.24.1 | RowpppOperStatusEntry | not-accessible | mandatory | An entry in the pppOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.102.24.1.1 | ColumnpppSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.2.33 | NodepppMIB | |||
| 1.3.6.1.4.1.562.2.4.2.33.1 | NodepppGroup | |||
| 1.3.6.1.4.1.562.2.4.2.33.1.3 | NodepppGroupBC | |||
| 1.3.6.1.4.1.562.2.4.2.33.1.3.3 | NodepppGroupBC02 | |||
| 1.3.6.1.4.1.562.2.4.2.33.1.3.3.2 | NodepppGroupBC02A | |||
| 1.3.6.1.4.1.562.2.4.2.33.3 | NodepppCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.33.3.3 | NodepppCapabilitiesBC | |||
| 1.3.6.1.4.1.562.2.4.2.33.3.3.3 | NodepppCapabilitiesBC02 | |||
| 1.3.6.1.4.1.562.2.4.2.33.3.3.3.2 | NodepppCapabilitiesBC02A |