Nortel-Magellan-Passport-SubnetInterfaceMIB
56 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.16.2 | NodemodVcs | |||
| 1.3.6.1.4.1.562.2.4.1.16.2.1 | TablemodVcsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of modVcs components. |
| 1.3.6.1.4.1.562.2.4.1.16.2.1.1 | RowmodVcsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single modVcs component. |
| 1.3.6.1.4.1.562.2.4.1.16.2.1.1.1 | ColumnmodVcsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of modVcs components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.16.2.1.1.2 | ColumnmodVcsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.16.2.1.1.4 | ColumnmodVcsStorageType | read-only | mandatory | This variable represents the storage type value for the modVcs tables. |
| 1.3.6.1.4.1.562.2.4.1.16.2.1.1.10 | ColumnmodVcsIndex | not-accessible | mandatory | This variable represents the index for the modVcs tables. |
| 1.3.6.1.4.1.562.2.4.1.16.2.10 | TablemodVcsAccOptTable | not-accessible | mandatory | Accounting information is owned by the Vc System; it is stored in the Vc Accounting component, which itself is considered to be a component on the switch. The … |
| 1.3.6.1.4.1.562.2.4.1.16.2.10.1 | RowmodVcsAccOptEntry | not-accessible | mandatory | An entry in the modVcsAccOptTable. |
| 1.3.6.1.4.1.562.2.4.1.16.2.10.1.1 | ColumnmodVcsSegmentSize | read-write | mandatory | This attribute specifies the segment size for accounting of national calls. Minimum allowed segment size is 1. If data segment is sent which is less than segme… |
| 1.3.6.1.4.1.562.2.4.1.16.2.10.1.2 | ColumnmodVcsUnitsCounted | read-write | mandatory | This attribute specifies what is counted by frame services. If set to frames, frames are counted, else segments are counted. |
| 1.3.6.1.4.1.562.2.4.1.16.2.10.1.3 | ColumnmodVcsAccountingFax | read-write | mandatory | Each value corresponds to an accounting facility code, of which there are currently 10 facility codes defined with codes H.00 to H.09, and corresponding to the… |
| 1.3.6.1.4.1.562.2.4.1.16.2.10.1.4 | ColumnmodVcsGenerationMode | read-write | mandatory | This attribute specifies part of the rules by which the network generates accounting records. If set to bothEnds, then both ends of the Vc generate accounting … |
| 1.3.6.1.4.1.562.2.4.1.16.2.12 | TablemodVcsAddOptTable | not-accessible | mandatory | The Vc AddressingOptions group describes the addressing parameters. It is currently owned by the Vc. Most of the data contained in the Vc AddressingOptions gro… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1 | RowmodVcsAddOptEntry | not-accessible | mandatory | An entry in the modVcsAddOptTable. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.3 | ColumnmodVcsDefaultNumberingPlan | read-write | mandatory | This attribute specifies the numbering plan used which determines the address format: X.121 public packet switched data networks or E.164 numbering plan for IS… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.4 | ColumnmodVcsNetworkIdType | read-only | mandatory | This attribute specifies whether the network uses a DNIC or INIC. It is used by X.75 Gateways to indicate whether in network the DNIC or INIC is used in variou… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.5 | ColumnmodVcsX121Type | read-write | mandatory | This attribute specifies whether DNIC mode or DCC mode is used in X.121 address of international calls. If DCC is specified, then the first 3 digits of each DN… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.6 | ColumnmodVcsNetworkIdCode | read-write | mandatory | This attribute specifies the DNIC (Data Network ID Code) of the network or DCC code. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.7 | ColumnmodVcsX121IntlAddresses | read-write | mandatory | This attribute indicates if any DTE is allowed to signal international addresses. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.8 | ColumnmodVcsX121IntllPrefixDigit | read-write | mandatory | This attribute indicates the prefix digit to be used for X.121 international calls. When this digit is provided the call will have full international address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.11 | ColumnmodVcsX121MinAddressLength | read-write | mandatory | This attribute indicates minimum length of x121 address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.12 | ColumnmodVcsX121MaxAddressLength | read-write | mandatory | This attribute indicates maximum length of x121 address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.13 | ColumnmodVcsX121ToE164EscapeSignificance | read-write | mandatory | This attribute specifies whether an X.121 to E.164 escape digit has significance in selecting an X.32 (analog) or an ISDN switched path. If two values are sign… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.14 | ColumnmodVcsE164IntlFormatAllowed | read-write | mandatory | This attribute indicates whether or not to allow national format E.164 addresses. If this attribute is set to a value of Yes (=1) then national format E.164 ad… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.15 | ColumnmodVcsE164IntlPrefixDigits | read-write | mandatory | This attribute specifies the E.164 international prefix digits. If applicable, it is specified as 1 to 3 BCD digits. The 3 BCD digits are stored with the lengt… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.16 | ColumnmodVcsE164NatlPrefixDigit | read-write | mandatory | This attribute contains the E.164 national prefix which may be added in front of E.164 local or national call. If e164IntlFormatOnly is set to 1, this attribut… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.17 | ColumnmodVcsE164LocalAddressLength | read-write | mandatory | This attribute indicates the length of a local E.164 DNA on this module. This attribute is not required if the corresponding attribute, e164IntlFormatOnly is s… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.18 | ColumnmodVcsE164TeleCountryCode | read-write | mandatory | This attribute specifies the E.164 Telephone Country Code (TCC) for the country in which the network resides. If applicable, it is specified as 1 to 3 BCD digi… |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.20 | ColumnmodVcsE164NatlMinAddressLength | read-write | mandatory | This attribute indicates minimum length of e164 national address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.21 | ColumnmodVcsE164NatlMaxAddressLength | read-write | mandatory | This attribute indicates maximum length of e164 national address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.22 | ColumnmodVcsE164IntlMinAddressLength | read-write | mandatory | This attribute indicates minimum length of e164 international address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.23 | ColumnmodVcsE164IntlMaxAddressLength | read-write | mandatory | This attribute indicates maximum length of e164 international address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.24 | ColumnmodVcsE164LocalMinAddressLength | read-write | mandatory | This attribute indicates minimum length of e164 local address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.12.1.25 | ColumnmodVcsE164LocalMaxAddressLength | read-write | mandatory | This attribute indicates maximum length of e164 local address. |
| 1.3.6.1.4.1.562.2.4.1.16.2.13 | TablemodVcsIntOptTable | not-accessible | mandatory | The Vc InterfaceOptions group defines Vc system parameters common in the network. It is owned by the Vc and is considered to be a module wide component on the … |
| 1.3.6.1.4.1.562.2.4.1.16.2.13.1 | RowmodVcsIntOptEntry | not-accessible | mandatory | An entry in the modVcsIntOptTable. |
| 1.3.6.1.4.1.562.2.4.1.16.2.13.1.1 | ColumnmodVcsHighPriorityPacketSizes | read-only | mandatory | This attribute indicates which packet sizes are supported for high priority calls within the network. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4)… |
| 1.3.6.1.4.1.562.2.4.1.16.2.13.1.2 | ColumnmodVcsMaxSubnetPacketSize | read-write | mandatory | This attribute specifies the maximum subnet packet size used for the connections originating or terminating on this module. All modules in the same network sho… |
| 1.3.6.1.4.1.562.2.4.1.16.2.13.1.3 | ColumnmodVcsCallSetupTimer | read-write | mandatory | This attribute specifies the Vc callSetupTimer in units of 1 second ticks. This timer specifies how long the Vc will wait, after sending a subnet Call Request … |
| 1.3.6.1.4.1.562.2.4.1.16.2.13.1.4 | ColumnmodVcsCallRetryTimer | read-write | mandatory | This attribute specifies, for Vc implementing Direct Calls with the auto-call retry feature (including PVCs), the Vc callRetryTimer in units of 1 second ticks.… |
| 1.3.6.1.4.1.562.2.4.1.16.2.13.1.5 | ColumnmodVcsDelaySubnetAcks | read-write | mandatory | This attribute specifies delay acknowledgment timer mechanism. If this attribute is set to no, then the Vc will automatically return acknowledgment packets wit… |
| 1.3.6.1.4.1.562.2.4.1.16.2.213 | TablemodVcsWinsTable | not-accessible | mandatory | This is the windowSize corresponding to the given packet size and throughput class. All Vcs using the windowSize matrix support large Vc windows on both ends o… |
| 1.3.6.1.4.1.562.2.4.1.16.2.213.1 | RowmodVcsWinsEntry | not-accessible | mandatory | An entry in the modVcsWinsTable. |
| 1.3.6.1.4.1.562.2.4.1.16.2.213.1.1 | ColumnmodVcsWinsPktIndex | not-accessible | mandatory | This variable represents the next to last index for the modVcsWinsTable. |
| 1.3.6.1.4.1.562.2.4.1.16.2.213.1.2 | ColumnmodVcsWinsTptIndex | not-accessible | mandatory | This variable represents the final index for the modVcsWinsTable. |
| 1.3.6.1.4.1.562.2.4.1.16.2.213.1.3 | ColumnmodVcsWinsValue | read-write | mandatory | This variable represents an individual value for the modVcsWinsTable. |
| 1.3.6.1.4.1.562.2.4.2.45 | NodesubnetInterfaceMIB | |||
| 1.3.6.1.4.1.562.2.4.2.45.1 | NodesubnetInterfaceGroup | |||
| 1.3.6.1.4.1.562.2.4.2.45.1.5 | NodesubnetInterfaceGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.45.1.5.1 | NodesubnetInterfaceGroupBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.45.1.5.1.2 | NodesubnetInterfaceGroupBE00A | |||
| 1.3.6.1.4.1.562.2.4.2.45.3 | NodesubnetInterfaceCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.45.3.5 | NodesubnetInterfaceCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.45.3.5.1 | NodesubnetInterfaceCapabilitiesBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.45.3.5.1.2 | NodesubnetInterfaceCapabilitiesBE00A |