Nortel-Magellan-Passport-TdmaIwfMIB
340 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.135 | NodetdmaCs | |||
| 1.3.6.1.4.1.562.2.4.1.135.1 | TabletdmaCsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCs components. |
| 1.3.6.1.4.1.562.2.4.1.135.1.1 | RowtdmaCsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCs component. |
| 1.3.6.1.4.1.562.2.4.1.135.1.1.1 | ColumntdmaCsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of tdmaCs components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.135.1.1.2 | ColumntdmaCsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.1.1.4 | ColumntdmaCsStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCs tables. |
| 1.3.6.1.4.1.562.2.4.1.135.1.1.10 | ColumntdmaCsCsIndex | not-accessible | mandatory | This variable represents the index for the tdmaCs tables. |
| 1.3.6.1.4.1.562.2.4.1.135.2 | NodetdmaCsModem | |||
| 1.3.6.1.4.1.562.2.4.1.135.2.1 | TabletdmaCsModemRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCsModem components. |
| 1.3.6.1.4.1.562.2.4.1.135.2.1.1 | RowtdmaCsModemRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCsModem component. |
| 1.3.6.1.4.1.562.2.4.1.135.2.1.1.1 | ColumntdmaCsModemRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaCsModem components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.135.2.1.1.2 | ColumntdmaCsModemComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.2.1.1.4 | ColumntdmaCsModemStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCsModem tables. |
| 1.3.6.1.4.1.562.2.4.1.135.2.1.1.10 | ColumntdmaCsModemIndex | not-accessible | mandatory | This variable represents the index for the tdmaCsModem tables. |
| 1.3.6.1.4.1.562.2.4.1.135.3 | NodetdmaCsFax | |||
| 1.3.6.1.4.1.562.2.4.1.135.3.1 | TabletdmaCsFaxRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCsFax components. |
| 1.3.6.1.4.1.562.2.4.1.135.3.1.1 | RowtdmaCsFaxRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCsFax component. |
| 1.3.6.1.4.1.562.2.4.1.135.3.1.1.1 | ColumntdmaCsFaxRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaCsFax components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.135.3.1.1.2 | ColumntdmaCsFaxComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.3.1.1.4 | ColumntdmaCsFaxStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCsFax tables. |
| 1.3.6.1.4.1.562.2.4.1.135.3.1.1.10 | ColumntdmaCsFaxIndex | not-accessible | mandatory | This variable represents the index for the tdmaCsFax tables. |
| 1.3.6.1.4.1.562.2.4.1.135.4 | NodetdmaCsDce | |||
| 1.3.6.1.4.1.562.2.4.1.135.4.1 | TabletdmaCsDceRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCsDce components. |
| 1.3.6.1.4.1.562.2.4.1.135.4.1.1 | RowtdmaCsDceRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCsDce component. |
| 1.3.6.1.4.1.562.2.4.1.135.4.1.1.1 | ColumntdmaCsDceRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaCsDce components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.135.4.1.1.2 | ColumntdmaCsDceComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.4.1.1.4 | ColumntdmaCsDceStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCsDce tables. |
| 1.3.6.1.4.1.562.2.4.1.135.4.1.1.10 | ColumntdmaCsDceIndex | not-accessible | mandatory | This variable represents the index for the tdmaCsDce tables. |
| 1.3.6.1.4.1.562.2.4.1.135.5 | NodetdmaCsDsc | |||
| 1.3.6.1.4.1.562.2.4.1.135.5.1 | TabletdmaCsDscRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCsDsc components. |
| 1.3.6.1.4.1.562.2.4.1.135.5.1.1 | RowtdmaCsDscRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCsDsc component. |
| 1.3.6.1.4.1.562.2.4.1.135.5.1.1.1 | ColumntdmaCsDscRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaCsDsc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.135.5.1.1.2 | ColumntdmaCsDscComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.5.1.1.4 | ColumntdmaCsDscStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCsDsc tables. |
| 1.3.6.1.4.1.562.2.4.1.135.5.1.1.10 | ColumntdmaCsDscIndex | not-accessible | mandatory | This variable represents the index for the tdmaCsDsc tables. |
| 1.3.6.1.4.1.562.2.4.1.135.5.10 | TabletdmaCsDscProvTable | not-accessible | mandatory | This group contains the provisionable attributes for Data Service Control Asynchronous Data Service portion of the wireless protocol stack used for the calls s… |
| 1.3.6.1.4.1.562.2.4.1.135.5.10.1 | RowtdmaCsDscProvEntry | not-accessible | mandatory | An entry in the tdmaCsDscProvTable. |
| 1.3.6.1.4.1.562.2.4.1.135.5.10.1.1 | ColumntdmaCsDscLl0BufferSize | read-write | obsolete | This attribute specifies the maximum size of the DSC logical link 0 control buffer. Changes impact the amount of memory used (more memory is used when increasi… |
| 1.3.6.1.4.1.562.2.4.1.135.5.10.1.2 | ColumntdmaCsDscLl1BufferSize | read-write | obsolete | This attribute specifies the maximum size of the DSC logical link 1 data buffer. Changes impact the amount of memory used (more memory is used when increasing … |
| 1.3.6.1.4.1.562.2.4.1.135.5.10.1.3 | ColumntdmaCsDscK0Ll0WindowSize | read-write | mandatory | This attribute specifies the maximum size of the DSC logical link 0 window. |
| 1.3.6.1.4.1.562.2.4.1.135.5.10.1.4 | ColumntdmaCsDscK1Ll1WindowSize | read-write | mandatory | This attribute specifies the maximum size of the DSC logical link 1 window. |
| 1.3.6.1.4.1.562.2.4.1.135.5.10.1.5 | ColumntdmaCsDscP0CompressionDirection | read-write | obsolete | This attribute specifies the compression configuration for DSC. This attribute has one of the following values: noCompression: No compression. compInitrResp: C… |
| 1.3.6.1.4.1.562.2.4.1.135.5.10.1.6 | ColumntdmaCsDscP1CompressionMaximumCodewords | read-write | obsolete | This attribute specifies the maximum number of codewords to be used for compression. A codeword is a binary number that represents a string of characters. Chan… |
| 1.3.6.1.4.1.562.2.4.1.135.5.10.1.7 | ColumntdmaCsDscP2CompressionMaximumCharacters | read-write | obsolete | This attribute specifies the maximum number of characters that can be represented by a single codeword to be used for compression from logical link 0. |
| 1.3.6.1.4.1.562.2.4.1.135.6 | NodetdmaCsRlp1 | |||
| 1.3.6.1.4.1.562.2.4.1.135.6.1 | TabletdmaCsRlp1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCsRlp1 components. |
| 1.3.6.1.4.1.562.2.4.1.135.6.1.1 | RowtdmaCsRlp1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCsRlp1 component. |
| 1.3.6.1.4.1.562.2.4.1.135.6.1.1.1 | ColumntdmaCsRlp1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of tdmaCsRlp1 components. These components can be added. |
| 1.3.6.1.4.1.562.2.4.1.135.6.1.1.2 | ColumntdmaCsRlp1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.6.1.1.4 | ColumntdmaCsRlp1StorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCsRlp1 tables. |
| 1.3.6.1.4.1.562.2.4.1.135.6.1.1.10 | ColumntdmaCsRlp1Index | not-accessible | mandatory | This variable represents the index for the tdmaCsRlp1 tables. |
| 1.3.6.1.4.1.562.2.4.1.135.6.10 | TabletdmaCsRlp1ProvTable | not-accessible | mandatory | This group contains provisionable attributes for the Radio Link Protocol 1 (RLP1) parameters used for the calls set up by this particular TdmaIwfCallServer. Ch… |
| 1.3.6.1.4.1.562.2.4.1.135.6.10.1 | RowtdmaCsRlp1ProvEntry | not-accessible | mandatory | An entry in the tdmaCsRlp1ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.135.6.10.1.1 | ColumntdmaCsRlp1T1ResponseTimer | read-write | mandatory | This attribute specifies the time the receiving Radio Link Protocol (RLP1) entity shall wait for a response from the peer TIA-136-310 (formerly IS-130) applica… |
| 1.3.6.1.4.1.562.2.4.1.135.6.10.1.2 | ColumntdmaCsRlp1T2LinkActivityTimer | read-write | mandatory | This attribute specifies the maximum time the receiving Radio Link Protocol (RLP1) entity shall wait for link activity. During the Exchange Information (XID) n… |
| 1.3.6.1.4.1.562.2.4.1.135.6.10.1.3 | ColumntdmaCsRlp1T3PeerAckTimer | read-write | mandatory | This attribute specifies the maximum time the receiving Radio Link Protocol (RLP1) entity shall wait for the peer to ACK or NAK data. During the Exchange Infor… |
| 1.3.6.1.4.1.562.2.4.1.135.7 | NodetdmaCsV42 | |||
| 1.3.6.1.4.1.562.2.4.1.135.7.1 | TabletdmaCsV42RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCsV42 components. |
| 1.3.6.1.4.1.562.2.4.1.135.7.1.1 | RowtdmaCsV42RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCsV42 component. |
| 1.3.6.1.4.1.562.2.4.1.135.7.1.1.1 | ColumntdmaCsV42RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaCsV42 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.135.7.1.1.2 | ColumntdmaCsV42ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.7.1.1.4 | ColumntdmaCsV42StorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCsV42 tables. |
| 1.3.6.1.4.1.562.2.4.1.135.7.1.1.10 | ColumntdmaCsV42Index | not-accessible | mandatory | This variable represents the index for the tdmaCsV42 tables. |
| 1.3.6.1.4.1.562.2.4.1.135.7.10 | TabletdmaCsV42ProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the V.42 protocol used for the calls set up by this particular IwfCallServer. Changes to these attributes … |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1 | RowtdmaCsV42ProvEntry | not-accessible | mandatory | An entry in the tdmaCsV42ProvTable. |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.1 | ColumntdmaCsV42T400DetectTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP i… |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.2 | ColumntdmaCsV42T401AckTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF waits for an acknowledgment before retransmitting a frame. Since information about the T401 ti… |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.3 | ColumntdmaCsV42T402AckDelayTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF may wait following the receipt of any frame requiring a reply before it initiates transmission… |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.4 | ColumntdmaCsV42T403IdleProbeTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF allows to elapse without frames being exchanged. The link is permitted to remain idle with no … |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.5 | ColumntdmaCsV42TxN401FrameSize | read-write | mandatory | This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) f… |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.6 | ColumntdmaCsV42RxN401FrameSize | read-write | mandatory | This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) f… |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.7 | ColumntdmaCsV42TxKWindowSize | read-write | mandatory | This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the remote entity. The default value… |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.8 | ColumntdmaCsV42RxKWindowSize | read-write | mandatory | This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity to the IWF. The default value… |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.9 | ColumntdmaCsV42N400RetransLimit | read-write | mandatory | This attribute specifies the maximum number of times the IWF retransmits a frame upon expiry of t401AckTimer before appropriate recovery action is taken. Infor… |
| 1.3.6.1.4.1.562.2.4.1.135.7.10.1.10 | ColumntdmaCsV42FcsLength | read-write | mandatory | This attribute specifies whether a 16 bit or a 32 bit Frame Check Sequence (FCS) will be used for the link between the IWF and the far end DCE. This attribute … |
| 1.3.6.1.4.1.562.2.4.1.135.8 | NodetdmaCsV42Bis | |||
| 1.3.6.1.4.1.562.2.4.1.135.8.1 | TabletdmaCsV42BisRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCsV42Bis components. |
| 1.3.6.1.4.1.562.2.4.1.135.8.1.1 | RowtdmaCsV42BisRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCsV42Bis component. |
| 1.3.6.1.4.1.562.2.4.1.135.8.1.1.1 | ColumntdmaCsV42BisRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaCsV42Bis components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.135.8.1.1.2 | ColumntdmaCsV42BisComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.8.1.1.4 | ColumntdmaCsV42BisStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCsV42Bis tables. |
| 1.3.6.1.4.1.562.2.4.1.135.8.1.1.10 | ColumntdmaCsV42BisIndex | not-accessible | mandatory | This variable represents the index for the tdmaCsV42Bis tables. |
| 1.3.6.1.4.1.562.2.4.1.135.8.10 | TabletdmaCsV42BisProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the V.42bis data compression protocol parameters used for the calls set up by this particular CallServer. … |
| 1.3.6.1.4.1.562.2.4.1.135.8.10.1 | RowtdmaCsV42BisProvEntry | not-accessible | mandatory | An entry in the tdmaCsV42BisProvTable. |
| 1.3.6.1.4.1.562.2.4.1.135.8.10.1.1 | ColumntdmaCsV42BisP0CompressionDirection | read-write | mandatory | This attribute specifies the V.42bis data compression direction to be supported. The value for compression direction is negotiated at link setup by the data li… |
| 1.3.6.1.4.1.562.2.4.1.135.8.10.1.2 | ColumntdmaCsV42BisP1MaximumCodewords | read-write | mandatory | This attribute specifies the maximum number of V.42bis codewords the IWF supports. A codeword is a binary number that represents a string of characters in comp… |
| 1.3.6.1.4.1.562.2.4.1.135.8.10.1.3 | ColumntdmaCsV42BisP2MaximumStringSize | read-write | mandatory | This attribute specifies the maximum number of characters allowed in a string represented by a codeword that the IWF supports. Each codeword in a V.42bis dicti… |
| 1.3.6.1.4.1.562.2.4.1.135.8.10.1.4 | ColumntdmaCsV42BisActionOnError | read-write | mandatory | This attribute specifies whether or not V.42bis takes down the call or resets the link when any of the following errors occur: 1.Receipt of STEPUP (step up cod… |
| 1.3.6.1.4.1.562.2.4.1.135.9 | NodetdmaCsLp | |||
| 1.3.6.1.4.1.562.2.4.1.135.9.1 | TabletdmaCsLpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaCsLp components. |
| 1.3.6.1.4.1.562.2.4.1.135.9.1.1 | RowtdmaCsLpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaCsLp component. |
| 1.3.6.1.4.1.562.2.4.1.135.9.1.1.1 | ColumntdmaCsLpRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of tdmaCsLp components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.135.9.1.1.2 | ColumntdmaCsLpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.135.9.1.1.4 | ColumntdmaCsLpStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaCsLp tables. |
| 1.3.6.1.4.1.562.2.4.1.135.9.1.1.10 | ColumntdmaCsLpIndex | not-accessible | mandatory | This variable represents the index for the tdmaCsLp tables. |
| 1.3.6.1.4.1.562.2.4.1.135.9.10 | TabletdmaCsLpOperTable | not-accessible | mandatory | This group contains operational attributes pertaining to information about TdmaIwfBearerChannels and TdmaIwfLogicalProcessor associated with a TdmaIwfCallServe… |
| 1.3.6.1.4.1.562.2.4.1.135.9.10.1 | RowtdmaCsLpOperEntry | not-accessible | mandatory | An entry in the tdmaCsLpOperTable. |
| 1.3.6.1.4.1.562.2.4.1.135.9.10.1.1 | ColumntdmaCsLpConfiguredBearerChannels | read-only | mandatory | This attribute indicates the number of TdmaIwfBearerChannel components provisioned for the TdmaIwfLogicalProcessor represented by this component. |
| 1.3.6.1.4.1.562.2.4.1.135.9.10.1.2 | ColumntdmaCsLpActiveCalls | read-only | mandatory | This attribute indicates the number of calls currently active on this LogicalProcessor. |
| 1.3.6.1.4.1.562.2.4.1.135.9.10.1.3 | ColumntdmaCsLpModemsSupported | read-only | mandatory | This attribute indicates if modems are supported with this TdmaIwfLogicalProcessor. This attribute has one of the following values: yes: Modems are supported w… |
| 1.3.6.1.4.1.562.2.4.1.135.100 | TabletdmaCsServProvTable | not-accessible | mandatory | This group contains all the necessary timers for call setup and call clearing scenarios on the IWF. |
| 1.3.6.1.4.1.562.2.4.1.135.100.1 | RowtdmaCsServProvEntry | not-accessible | mandatory | An entry in the tdmaCsServProvTable. |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.1 | ColumntdmaCsTIwf1 | read-write | mandatory | This is an internal timer to the call server of the IWF and is used during call setup for ensuring the MIT protocol stack and the NIT modem for a new call have… |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.2 | ColumntdmaCsTIwf2 | read-write | mandatory | This is an internal timer to the call server of the IWF and is used during call clearing for ensuring the MIT protocol stack and NIT modem for a call have been… |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.3 | ColumntdmaCsT303 | read-write | mandatory | This timer is a call setup timer and is used for ensuring a CallProceeding message is received for a Setup message that has been sent by the IWF to the MTX. |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.4 | ColumntdmaCsT305 | read-write | mandatory | This timer is a call clearing timer and is used for ensuring a Release message is received for a Disconnect message the IWF has sent to the MTX. |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.5 | ColumntdmaCsT308 | read-write | mandatory | This timer is a call clearing timer and is used for ensuring a ReleaseComplete message is received for the Release message the IWF has sent to the MTX. |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.6 | ColumntdmaCsT313 | read-write | mandatory | This is a call setup timer and is used for ensuring a ConnectAck message is received in response for the Connect message the IWF has sent to the MTX. |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.7 | ColumntdmaCsT999 | read-write | mandatory | This timer is used during a mobile termination call setup and is used for ensuring the Setup message is received from the MTX. |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.8 | ColumntdmaCsSupportedTechnology | read-write | mandatory | This attribute specifies the wireless technology that is supported for data calls on this IWF. |
| 1.3.6.1.4.1.562.2.4.1.135.100.1.9 | ColumntdmaCsSupportedService | read-write | mandatory | This attribute specifies the type(s) of data calls this IWF supports. |
| 1.3.6.1.4.1.562.2.4.1.135.101 | TabletdmaCsMiscProvTable | not-accessible | mandatory | This group contains general provisioning data for the TdmaIwfCallServer that does not fit within other provisioning groups. |
| 1.3.6.1.4.1.562.2.4.1.135.101.1 | RowtdmaCsMiscProvEntry | not-accessible | mandatory | An entry in the tdmaCsMiscProvTable. |
| 1.3.6.1.4.1.562.2.4.1.135.101.1.1 | ColumntdmaCsCommentText | read-write | mandatory | Use of this attribute is at the discretion of the system administrator. Typically, this attribute is used to specify the name of the DMS- MTX configured for th… |
| 1.3.6.1.4.1.562.2.4.1.135.101.1.2 | ColumntdmaCsMscIpAddress | read-write | mandatory | This attribute specifies the Internet Protocol (IP) Address of the Mobile Telephone Exchange (MTX) that is permitted to set up MTX InterWorking Function (IWF) … |
| 1.3.6.1.4.1.562.2.4.1.135.101.1.3 | ColumntdmaCsVirtualRouterName | read-write | mandatory | This attribute specifies the virtual router that this TdmaIwfCallServer uses for transmitting and receiving signaling messages to and from the DMS-MTX. |
| 1.3.6.1.4.1.562.2.4.1.135.101.1.4 | ColumntdmaCsVoiceLaw | read-write | mandatory | This attribute specifies the voice law to be established for the IWF to PSTN modem link for calls established by this TdmaIwfCallServer. This attribute has one… |
| 1.3.6.1.4.1.562.2.4.1.135.103 | TabletdmaCsCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.135.103.1 | RowtdmaCsCidDataEntry | not-accessible | mandatory | An entry in the tdmaCsCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.135.103.1.1 | ColumntdmaCsCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.135.104 | TabletdmaCsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.135.104.1 | RowtdmaCsStateEntry | not-accessible | mandatory | An entry in the tdmaCsStateTable. |
| 1.3.6.1.4.1.562.2.4.1.135.104.1.1 | ColumntdmaCsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.135.104.1.2 | ColumntdmaCsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.135.104.1.3 | ColumntdmaCsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.135.121 | TabletdmaCsStatsTable | not-accessible | mandatory | This group contains operational attributes that measure the performance used for the calls set up by this particular TdmaIwfCallServer. |
| 1.3.6.1.4.1.562.2.4.1.135.121.1 | RowtdmaCsStatsEntry | not-accessible | mandatory | An entry in the tdmaCsStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.135.121.1.1 | ColumntdmaCsCurrentCalls | read-only | mandatory | This attribute indicates the number of active calls currently serviced by this particular TdmaIwfCallServer. |
| 1.3.6.1.4.1.562.2.4.1.135.121.1.2 | ColumntdmaCsCallsRequested | read-only | mandatory | This attribute counts the number of IWF call setup requests received at this particular TdmaIwfCallServer from the DMS-MTX. The counter wraps when it exceeds t… |
| 1.3.6.1.4.1.562.2.4.1.135.121.1.3 | ColumntdmaCsCallsSetUp | read-only | mandatory | This attribute counts the number of IWF calls successfully setup by this particular TdmaIwfCallServer. A call is considered setup when the IWF-Setup-Request me… |
| 1.3.6.1.4.1.562.2.4.1.135.121.1.4 | ColumntdmaCsCallsReleasedNormal | read-only | mandatory | This attribute counts the number of IWF calls that have completed successfully on this particular TdmaIwfCallServer. The counter wraps when it exceeds the maxi… |
| 1.3.6.1.4.1.562.2.4.1.135.121.1.5 | ColumntdmaCsCallsReleasedAbnormal | read-only | mandatory | This attribute counts the number of IWF calls that have been released due to error conditions at this particular TdmaIwfCallServer or one if its TdmaIwfBearerC… |
| 1.3.6.1.4.1.562.2.4.1.135.121.1.6 | ColumntdmaCsErroredLFrames | read-only | mandatory | This attribute counts the number of CM/IWF Control Interface (CCI) messages received from the DMS-MTX that have an incorrect format. The counter wraps when it … |
| 1.3.6.1.4.1.562.2.4.1.136 | NodetdmaBc | |||
| 1.3.6.1.4.1.562.2.4.1.136.1 | TabletdmaBcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBc components. |
| 1.3.6.1.4.1.562.2.4.1.136.1.1 | RowtdmaBcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBc component. |
| 1.3.6.1.4.1.562.2.4.1.136.1.1.1 | ColumntdmaBcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of tdmaBc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.1.1.2 | ColumntdmaBcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.1.1.4 | ColumntdmaBcStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBc tables. |
| 1.3.6.1.4.1.562.2.4.1.136.1.1.10 | ColumntdmaBcCsIndex | not-accessible | mandatory | This variable represents an index for the tdmaBc tables. |
| 1.3.6.1.4.1.562.2.4.1.136.1.1.11 | ColumntdmaBcBcIndex | not-accessible | mandatory | This variable represents an index for the tdmaBc tables. |
| 1.3.6.1.4.1.562.2.4.1.136.2 | NodetdmaBcFramer | |||
| 1.3.6.1.4.1.562.2.4.1.136.2.1 | TabletdmaBcFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBcFramer components. |
| 1.3.6.1.4.1.562.2.4.1.136.2.1.1 | RowtdmaBcFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBcFramer component. |
| 1.3.6.1.4.1.562.2.4.1.136.2.1.1.1 | ColumntdmaBcFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaBcFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.2.1.1.2 | ColumntdmaBcFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.2.1.1.4 | ColumntdmaBcFramerStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBcFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.136.2.1.1.10 | ColumntdmaBcFramerIndex | not-accessible | mandatory | This variable represents the index for the tdmaBcFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.136.2.10 | TabletdmaBcFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.136.2.10.1 | RowtdmaBcFramerProvEntry | not-accessible | mandatory | An entry in the tdmaBcFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.136.2.10.1.1 | ColumntdmaBcFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.136.2.11 | TabletdmaBcFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a TdmaIwfFramer component. |
| 1.3.6.1.4.1.562.2.4.1.136.2.11.1 | RowtdmaBcFramerStatsEntry | not-accessible | mandatory | An entry in the tdmaBcFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.136.2.11.1.1 | ColumntdmaBcFramerTxFrames | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.2.11.1.2 | ColumntdmaBcFramerRxFrames | read-only | mandatory | This attribute counts the number of frames received from the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.2.11.1.3 | ColumntdmaBcFramerRxBytes | read-only | mandatory | This attribute counts the number of bytes received from the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.2.12 | TabletdmaBcFramerLinkTable | not-accessible | mandatory | This group contains provisionable attributes for the TdmaIwfFramer which controls link layer framing for application components sending and receiving data on a… |
| 1.3.6.1.4.1.562.2.4.1.136.2.12.1 | RowtdmaBcFramerLinkEntry | not-accessible | mandatory | An entry in the tdmaBcFramerLinkTable. |
| 1.3.6.1.4.1.562.2.4.1.136.2.12.1.1 | ColumntdmaBcFramerFramingType | read-write | mandatory | This attribute indicates the type of framing for the link layer data received and transmitted on this channel. This attribute has one of the following values: … |
| 1.3.6.1.4.1.562.2.4.1.136.2.13 | TabletdmaBcFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.136.2.13.1 | RowtdmaBcFramerStateEntry | not-accessible | mandatory | An entry in the tdmaBcFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.136.2.13.1.1 | ColumntdmaBcFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.136.2.13.1.2 | ColumntdmaBcFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.136.2.13.1.3 | ColumntdmaBcFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.136.3 | NodetdmaBcModem | |||
| 1.3.6.1.4.1.562.2.4.1.136.3.1 | TabletdmaBcModemRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBcModem components. |
| 1.3.6.1.4.1.562.2.4.1.136.3.1.1 | RowtdmaBcModemRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBcModem component. |
| 1.3.6.1.4.1.562.2.4.1.136.3.1.1.1 | ColumntdmaBcModemRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaBcModem components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.3.1.1.2 | ColumntdmaBcModemComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.3.1.1.4 | ColumntdmaBcModemStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBcModem tables. |
| 1.3.6.1.4.1.562.2.4.1.136.3.1.1.10 | ColumntdmaBcModemIndex | not-accessible | mandatory | This variable represents the index for the tdmaBcModem tables. |
| 1.3.6.1.4.1.562.2.4.1.136.3.10 | TabletdmaBcModemOperTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the modem component for this particular TdmaIwfBearerChannel. |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1 | RowtdmaBcModemOperEntry | not-accessible | mandatory | An entry in the tdmaBcModemOperTable. |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.1 | ColumntdmaBcModemVoiceLaw | read-only | mandatory | This attribute indicates the active voice law associated with the modem component. This attribute has one of the following values: aLaw and muLaw. Both protoco… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.2 | ColumntdmaBcModemRate | read-only | mandatory | This attribute indicates the transmission rate of the current modem in use. All rates are the same in both the transmit and receive directions. |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.3 | ColumntdmaBcModemModemAlgorithmInUse | read-only | mandatory | This attribute indicates the current modem algorithm(s) active for the channel. This attribute has one of the following values: t30: T.30 is active. T.30 is th… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.4 | ColumntdmaBcModemProtocolState | read-only | mandatory | This attribute indicates the active protocol state of the modem in use.This attribute has one of the following values: idle: Modem is in an inactive state and … |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.5 | ColumntdmaBcModemMobileSideFlowControlState | read-only | mandatory | This attribute indicates the state of flow control based on whether flow control was requested by the mobile side of the connection and an indication was sent … |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.6 | ColumntdmaBcModemPstnSideFlowControlState | read-only | mandatory | This attribute indicates the state of flow control based on whether flow control was requested by the PSTN side of the connection and an indication was sent to… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.7 | ColumntdmaBcModemAsyncMode | read-only | mandatory | This attribute indicates whether conversion between synchronous and asynchronous data format (specifically, the stripping or insertion of start and stop bits) … |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.8 | ColumntdmaBcModemOutbandFlowControl | read-only | mandatory | This attribute indicates whether outband flow control conversions are being performed. If outband flow control is on, then when the Modem Application Layer (MA… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.9 | ColumntdmaBcModemOutbandBreak | read-only | mandatory | This attribute indicates whether inband or outband break control conversions are being performed. If outband break control is on, when the modem detects a brea… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.10 | ColumntdmaBcModemAutobaud | read-only | mandatory | This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the DMS-MTX on the following: (1) the initial modem data rat… |
| 1.3.6.1.4.1.562.2.4.1.136.3.11 | TabletdmaBcModemStatsTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the modem component for this particular TdmaIwfBearerChannel. |
| 1.3.6.1.4.1.562.2.4.1.136.3.11.1 | RowtdmaBcModemStatsEntry | not-accessible | mandatory | An entry in the tdmaBcModemStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.136.3.11.1.1 | ColumntdmaBcModemTxBytes | read-only | mandatory | This attribute counts the number of payload bytes transmitted. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.3.11.1.2 | ColumntdmaBcModemRxBytes | read-only | mandatory | This attribute counts the number of payload bytes received. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.3.11.1.3 | ColumntdmaBcModemFramingErrors | read-only | mandatory | This attribute counts the number of framing errors detected by the hardware. This is the absence of a stop bit after a start bit and eight bits of data. All in… |
| 1.3.6.1.4.1.562.2.4.1.136.4 | NodetdmaBcFax | |||
| 1.3.6.1.4.1.562.2.4.1.136.4.1 | TabletdmaBcFaxRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBcFax components. |
| 1.3.6.1.4.1.562.2.4.1.136.4.1.1 | RowtdmaBcFaxRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBcFax component. |
| 1.3.6.1.4.1.562.2.4.1.136.4.1.1.1 | ColumntdmaBcFaxRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaBcFax components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.4.1.1.2 | ColumntdmaBcFaxComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.4.1.1.4 | ColumntdmaBcFaxStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBcFax tables. |
| 1.3.6.1.4.1.562.2.4.1.136.4.1.1.10 | ColumntdmaBcFaxIndex | not-accessible | mandatory | This variable represents the index for the tdmaBcFax tables. |
| 1.3.6.1.4.1.562.2.4.1.136.4.10 | TabletdmaBcFaxOperTable | not-accessible | mandatory | This group contains operational attributes which measure the performance of the fax protocol. |
| 1.3.6.1.4.1.562.2.4.1.136.4.10.1 | RowtdmaBcFaxOperEntry | not-accessible | mandatory | An entry in the tdmaBcFaxOperTable. |
| 1.3.6.1.4.1.562.2.4.1.136.4.10.1.1 | ColumntdmaBcFaxActiveMode | read-only | mandatory | This attribute indicates the mode of the fax T.30 protocol, determined during Exchange Identification (XID) negotiations. The following modes are supported: no… |
| 1.3.6.1.4.1.562.2.4.1.136.4.10.1.2 | ColumntdmaBcFaxProtocolState | read-only | mandatory | This attribute indicates the protocol state of the fax adaptor. This attribute has one of the following values: setup: Call setup state. idle: Idle state only … |
| 1.3.6.1.4.1.562.2.4.1.136.4.10.1.3 | ColumntdmaBcFaxMessageRate | read-only | mandatory | This attribute indicates the fax message rate used for sending fax documents. |
| 1.3.6.1.4.1.562.2.4.1.136.4.11 | TabletdmaBcFaxStatsTable | not-accessible | mandatory | This group contains statistical attributes which measure the performance of the fax protocol. |
| 1.3.6.1.4.1.562.2.4.1.136.4.11.1 | RowtdmaBcFaxStatsEntry | not-accessible | mandatory | An entry in the tdmaBcFaxStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.136.4.11.1.1 | ColumntdmaBcFaxTxPagesToMobile | read-only | mandatory | The attribute counts the number of fax pages transmitted to the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.4.11.1.2 | ColumntdmaBcFaxRxPagesFromMobile | read-only | mandatory | This attribute counts the number of fax pages received from the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.5 | NodetdmaBcDce | |||
| 1.3.6.1.4.1.562.2.4.1.136.5.1 | TabletdmaBcDceRowStatusTable | not-accessible | obsolete | This entry controls the addition and deletion of tdmaBcDce components. |
| 1.3.6.1.4.1.562.2.4.1.136.5.1.1 | RowtdmaBcDceRowStatusEntry | not-accessible | obsolete | A single entry in the table represents a single tdmaBcDce component. |
| 1.3.6.1.4.1.562.2.4.1.136.5.1.1.1 | ColumntdmaBcDceRowStatus | read-only | obsolete | This variable is used as the basis for SNMP naming of tdmaBcDce components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.5.1.1.2 | ColumntdmaBcDceComponentName | read-only | obsolete | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.5.1.1.4 | ColumntdmaBcDceStorageType | read-only | obsolete | This variable represents the storage type value for the tdmaBcDce tables. |
| 1.3.6.1.4.1.562.2.4.1.136.5.1.1.10 | ColumntdmaBcDceIndex | not-accessible | obsolete | This variable represents the index for the tdmaBcDce tables. |
| 1.3.6.1.4.1.562.2.4.1.136.6 | NodetdmaBcDsc | |||
| 1.3.6.1.4.1.562.2.4.1.136.6.1 | TabletdmaBcDscRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBcDsc components. |
| 1.3.6.1.4.1.562.2.4.1.136.6.1.1 | RowtdmaBcDscRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBcDsc component. |
| 1.3.6.1.4.1.562.2.4.1.136.6.1.1.1 | ColumntdmaBcDscRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaBcDsc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.6.1.1.2 | ColumntdmaBcDscComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.6.1.1.4 | ColumntdmaBcDscStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBcDsc tables. |
| 1.3.6.1.4.1.562.2.4.1.136.6.1.1.10 | ColumntdmaBcDscIndex | not-accessible | mandatory | This variable represents the index for the tdmaBcDsc tables. |
| 1.3.6.1.4.1.562.2.4.1.136.6.10 | TabletdmaBcDscOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of the DSC asynchronous data service. |
| 1.3.6.1.4.1.562.2.4.1.136.6.10.1 | RowtdmaBcDscOperEntry | not-accessible | mandatory | An entry in the tdmaBcDscOperTable. |
| 1.3.6.1.4.1.562.2.4.1.136.6.10.1.1 | ColumntdmaBcDscP0CompressionDirection | read-only | mandatory | This attribute indicates the direction of compression requested from logical link 0 (LL0). This attribute has one of the following values: noCpmpression: No da… |
| 1.3.6.1.4.1.562.2.4.1.136.6.10.1.2 | ColumntdmaBcDscP1CompressionMaximumCodewords | read-only | mandatory | This attribute indicates the maximum number of codewords to be requested from logical link 0 (LL0) for compression. A codeword is a binary number that represen… |
| 1.3.6.1.4.1.562.2.4.1.136.6.10.1.3 | ColumntdmaBcDscP2CompressionMaximumCharacters | read-only | mandatory | This attribute indicates the maximum number of characters that can be represented by a single codeword to be requested from logical link 0 (LL0) for compressio… |
| 1.3.6.1.4.1.562.2.4.1.136.6.11 | TabletdmaBcDscStatsTable | not-accessible | mandatory | This group contains statistical attributes that measure the performance of the DSC asynchronous data service. |
| 1.3.6.1.4.1.562.2.4.1.136.6.11.1 | RowtdmaBcDscStatsEntry | not-accessible | mandatory | An entry in the tdmaBcDscStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.136.6.11.1.1 | ColumntdmaBcDscTxBytes | read-only | mandatory | This attribute counts the number of data bytes relayed by DSC in the transmit direction (towards the mobile). The counter wraps when it exceeds the maximum val… |
| 1.3.6.1.4.1.562.2.4.1.136.6.11.1.2 | ColumntdmaBcDscRxBytes | read-only | mandatory | This attribute counts the number of data bytes relayed by DSC in the receive direction (from the mobile). The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.7 | NodetdmaBcRlp1 | |||
| 1.3.6.1.4.1.562.2.4.1.136.7.1 | TabletdmaBcRlp1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBcRlp1 components. |
| 1.3.6.1.4.1.562.2.4.1.136.7.1.1 | RowtdmaBcRlp1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBcRlp1 component. |
| 1.3.6.1.4.1.562.2.4.1.136.7.1.1.1 | ColumntdmaBcRlp1RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaBcRlp1 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.7.1.1.2 | ColumntdmaBcRlp1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.7.1.1.4 | ColumntdmaBcRlp1StorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBcRlp1 tables. |
| 1.3.6.1.4.1.562.2.4.1.136.7.1.1.10 | ColumntdmaBcRlp1Index | not-accessible | mandatory | This variable represents the index for the tdmaBcRlp1 tables. |
| 1.3.6.1.4.1.562.2.4.1.136.7.10 | TabletdmaBcRlp1OperTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the TdmaIwfBearerChannel. |
| 1.3.6.1.4.1.562.2.4.1.136.7.10.1 | RowtdmaBcRlp1OperEntry | not-accessible | mandatory | An entry in the tdmaBcRlp1OperTable. |
| 1.3.6.1.4.1.562.2.4.1.136.7.10.1.1 | ColumntdmaBcRlp1Layer3L0ReqWinSize | read-only | mandatory | This attribute indicates the window size for Service Access Point (SAP) 0 requested by layer 3. The window size is the maximum number of sequentially numbered … |
| 1.3.6.1.4.1.562.2.4.1.136.7.10.1.2 | ColumntdmaBcRlp1Layer3L1ReqWinSize1 | read-only | mandatory | This attribute indicates the window size for Service Access Point (SAP) 1 requested by layer 3. The window size is the maximum number of sequentially numbered … |
| 1.3.6.1.4.1.562.2.4.1.136.7.10.1.3 | ColumntdmaBcRlp1T1ResponseTimer | read-only | mandatory | This attribute indicates the current T1 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Informati… |
| 1.3.6.1.4.1.562.2.4.1.136.7.10.1.4 | ColumntdmaBcRlp1T2LinkActivityTimer | read-only | mandatory | This attribute indicates the current T2 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Informati… |
| 1.3.6.1.4.1.562.2.4.1.136.7.10.1.5 | ColumntdmaBcRlp1T3PeerAckTimer | read-only | mandatory | This attribute indicates the current T3 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Informati… |
| 1.3.6.1.4.1.562.2.4.1.136.7.11 | TabletdmaBcRlp1StatsTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the TdmaIwfBearerChannel. |
| 1.3.6.1.4.1.562.2.4.1.136.7.11.1 | RowtdmaBcRlp1StatsEntry | not-accessible | mandatory | An entry in the tdmaBcRlp1StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.136.7.11.1.1 | ColumntdmaBcRlp1TxFrames | read-only | mandatory | This attribute counts the number of valid frames transmitted to the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.7.11.1.2 | ColumntdmaBcRlp1RxFrames | read-only | mandatory | This attributes counts the number of valid frames received from the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.7.11.1.3 | ColumntdmaBcRlp1BadRxFrames | read-only | mandatory | This attribute count the total number of bad RLP1 frames received from the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.8 | NodetdmaBcV42 | |||
| 1.3.6.1.4.1.562.2.4.1.136.8.1 | TabletdmaBcV42RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBcV42 components. |
| 1.3.6.1.4.1.562.2.4.1.136.8.1.1 | RowtdmaBcV42RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBcV42 component. |
| 1.3.6.1.4.1.562.2.4.1.136.8.1.1.1 | ColumntdmaBcV42RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaBcV42 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.8.1.1.2 | ColumntdmaBcV42ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.8.1.1.4 | ColumntdmaBcV42StorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBcV42 tables. |
| 1.3.6.1.4.1.562.2.4.1.136.8.1.1.10 | ColumntdmaBcV42Index | not-accessible | mandatory | This variable represents the index for the tdmaBcV42 tables. |
| 1.3.6.1.4.1.562.2.4.1.136.8.10 | TabletdmaBcV42OperTable | not-accessible | mandatory | This group contains operational attributes which measure V.42 error detection and correction performance. |
| 1.3.6.1.4.1.562.2.4.1.136.8.10.1 | RowtdmaBcV42OperEntry | not-accessible | mandatory | An entry in the tdmaBcV42OperTable. |
| 1.3.6.1.4.1.562.2.4.1.136.8.10.1.1 | ColumntdmaBcV42ProtocolState | read-only | mandatory | This attribute indicates the state of V.42. Valid states are: notActive: The V.42 link connection with the PSTN modem is not established. None of the V.42 func… |
| 1.3.6.1.4.1.562.2.4.1.136.8.10.1.2 | ColumntdmaBcV42TxN401FrameSize | read-only | mandatory | This attribute indicates the current value of parameter N401 for V.42 which is negotiated during Exchange Information (XID). This is the maximum number of octe… |
| 1.3.6.1.4.1.562.2.4.1.136.8.10.1.3 | ColumntdmaBcV42RxN401FrameSize | read-only | mandatory | This attribute indicates the current value of N401, that is negotiated during Exchange Identification (XID). This is the maximum number of octets that can be c… |
| 1.3.6.1.4.1.562.2.4.1.136.8.10.1.4 | ColumntdmaBcV42TxKWindowSize | read-only | mandatory | This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used … |
| 1.3.6.1.4.1.562.2.4.1.136.8.10.1.5 | ColumntdmaBcV42RxKWindowSize | read-only | mandatory | This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used f… |
| 1.3.6.1.4.1.562.2.4.1.136.8.10.1.6 | ColumntdmaBcV42V42ActiveInCall | read-only | mandatory | This attribute indicates whether V42 is really being used in this data call. |
| 1.3.6.1.4.1.562.2.4.1.136.8.10.1.7 | ColumntdmaBcV42V42BisActiveInCall | read-only | mandatory | This attribute indicates whether V42bis is really being used in this data call. |
| 1.3.6.1.4.1.562.2.4.1.136.8.11 | TabletdmaBcV42StatsTable | not-accessible | mandatory | This group contains statistical attributes that measure the V.42 error detection and correction performance. |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1 | RowtdmaBcV42StatsEntry | not-accessible | mandatory | An entry in the tdmaBcV42StatsTable. |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.1 | ColumntdmaBcV42RxIBytes | read-only | mandatory | This attribute counts the total number of bytes that the V.42 actually received from the PSTN modem in a data call. The counter wraps when it exceeds the maxim… |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.2 | ColumntdmaBcV42TxIBytes | read-only | mandatory | This attribute counts the total number of bytes that the V.42 transmitted to the PSTN modem in a data call. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.3 | ColumntdmaBcV42RxIFrames | read-only | mandatory | This attribute counts the total number of Information (I) frames that the V.42 received from the PSTN modem in a data call. The counter wraps when it exceeds t… |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.4 | ColumntdmaBcV42TxIFrames | read-only | mandatory | This attribute counts the total number of information frames that the V.42 transmitted to the PSTN modem in a data call. The counter wraps when it exceeds the … |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.5 | ColumntdmaBcV42RetransmittedFrames | read-only | mandatory | This attribute counts the total number of frames retransmitted by the IWF V.42 entity in a data call. The V.42 retransmits the same frame when the associated T… |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.6 | ColumntdmaBcV42T1AckTimeouts | read-only | mandatory | This attribute counts the total number of times that the T401 timer has timed out within a data call. If this timer times-out frequently, the operator may need… |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.7 | ColumntdmaBcV42RemoteBusyIndications | read-only | mandatory | This attribute counts the total number of times the PSTN modem enters a busy state (the IWF has received a Receive Not Ready message) and asks the IWF V.42 not… |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.8 | ColumntdmaBcV42LocalBusyIndications | read-only | mandatory | This attribute counts the total number of times the IWF V.42 enters in a busy condition and asks the peer to stop sending information frames until it has clear… |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.9 | ColumntdmaBcV42BadFramesRx | read-only | mandatory | This attribute counts the total number of bad frames the IWF V.42 has received from the PSTN remote modem within the data call. In this instance, 'bad frames' … |
| 1.3.6.1.4.1.562.2.4.1.136.8.11.1.10 | ColumntdmaBcV42CrcErrorsRx | read-only | mandatory | This attribute counts the total number of frames received from the remote PSTN modem that contain incorrect frame check sequence. A high value signifies the co… |
| 1.3.6.1.4.1.562.2.4.1.136.9 | NodetdmaBcV42Bis | |||
| 1.3.6.1.4.1.562.2.4.1.136.9.1 | TabletdmaBcV42BisRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBcV42Bis components. |
| 1.3.6.1.4.1.562.2.4.1.136.9.1.1 | RowtdmaBcV42BisRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBcV42Bis component. |
| 1.3.6.1.4.1.562.2.4.1.136.9.1.1.1 | ColumntdmaBcV42BisRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaBcV42Bis components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.9.1.1.2 | ColumntdmaBcV42BisComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.9.1.1.4 | ColumntdmaBcV42BisStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBcV42Bis tables. |
| 1.3.6.1.4.1.562.2.4.1.136.9.1.1.10 | ColumntdmaBcV42BisIndex | not-accessible | mandatory | This variable represents the index for the tdmaBcV42Bis tables. |
| 1.3.6.1.4.1.562.2.4.1.136.9.10 | TabletdmaBcV42BisOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of IwfV42bis. |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1 | RowtdmaBcV42BisOperEntry | not-accessible | mandatory | An entry in the tdmaBcV42BisOperTable. |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1.1 | ColumntdmaBcV42BisProtocolModeEncoder | read-only | mandatory | This attribute indicates the current mode of the IwfV42bis encoder. This mode can be either: transparent: A mode of operation in which compression has been sel… |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1.2 | ColumntdmaBcV42BisProtocolModeDecoder | read-only | mandatory | This attribute indicates the current mode of the V.42bis decoder. This mode can be either: transparent: A mode of operation in which compression has been selec… |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1.3 | ColumntdmaBcV42BisP0CompressionDirection | read-only | mandatory | This attribute indicates the direction in which V.42bis is active, negotiated at link setup by the data link protocol through Exchange Identification (XID) neg… |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1.4 | ColumntdmaBcV42BisP1MaximumCodewords | read-only | mandatory | This attribute indicates the maximum number of codewords in the dictionary negotiated at link setup by the data link protocol by way of the Exchange Identifica… |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1.5 | ColumntdmaBcV42BisP2MaximumStringSize | read-only | mandatory | This attribute indicates the maximum number of characters allowed in a string represented by a codeword negotiated at link setup by the data link protocol by w… |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1.6 | ColumntdmaBcV42BisLastDecodeError | read-only | mandatory | This attribute indicates last error found by the decoder. This attribute has one of the following values: none: No errors found. badStepup: Receipt of STEPUP (… |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1.7 | ColumntdmaBcV42BisCompRatioEncoder | read-only | mandatory | This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being comp… |
| 1.3.6.1.4.1.562.2.4.1.136.9.10.1.8 | ColumntdmaBcV42BisCompRatioDecoder | read-only | mandatory | This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being comp… |
| 1.3.6.1.4.1.562.2.4.1.136.9.11 | TabletdmaBcV42BisStatsTable | not-accessible | mandatory | This group contains statistical attributes that measure the performance of IwfV42bis. |
| 1.3.6.1.4.1.562.2.4.1.136.9.11.1 | RowtdmaBcV42BisStatsEntry | not-accessible | mandatory | An entry in the tdmaBcV42BisStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.136.9.11.1.1 | ColumntdmaBcV42BisModeChangesEncode | read-only | mandatory | This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the encoder. The counter wraps when it e… |
| 1.3.6.1.4.1.562.2.4.1.136.9.11.1.2 | ColumntdmaBcV42BisModeChangesDecode | read-only | mandatory | This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the decoder. The mode changes are determ… |
| 1.3.6.1.4.1.562.2.4.1.136.9.11.1.3 | ColumntdmaBcV42BisResetsEncode | read-only | mandatory | This attribute counts the number of resets sent by the encoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The counter… |
| 1.3.6.1.4.1.562.2.4.1.136.9.11.1.4 | ColumntdmaBcV42BisResetsDecode | read-only | mandatory | This attribute counts the number of resets received by the decoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The res… |
| 1.3.6.1.4.1.562.2.4.1.136.9.11.1.5 | ColumntdmaBcV42BisReinitializations | read-only | mandatory | This attribute counts the number of times V.42bis is reinitialized because of a destructive break (a destructive break is a break that causes data to be discar… |
| 1.3.6.1.4.1.562.2.4.1.136.9.11.1.6 | ColumntdmaBcV42BisErrorsInDecode | read-only | mandatory | This attribute counts the number of errors found by the decoder. The errors could be any of the following: 1.Receipt of STEPUP (step up codeword size) codeword… |
| 1.3.6.1.4.1.562.2.4.1.136.10 | NodetdmaBcUr | |||
| 1.3.6.1.4.1.562.2.4.1.136.10.1 | TabletdmaBcUrRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of tdmaBcUr components. |
| 1.3.6.1.4.1.562.2.4.1.136.10.1.1 | RowtdmaBcUrRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single tdmaBcUr component. |
| 1.3.6.1.4.1.562.2.4.1.136.10.1.1.1 | ColumntdmaBcUrRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of tdmaBcUr components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.136.10.1.1.2 | ColumntdmaBcUrComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.136.10.1.1.4 | ColumntdmaBcUrStorageType | read-only | mandatory | This variable represents the storage type value for the tdmaBcUr tables. |
| 1.3.6.1.4.1.562.2.4.1.136.10.1.1.10 | ColumntdmaBcUrIndex | not-accessible | mandatory | This variable represents the index for the tdmaBcUr tables. |
| 1.3.6.1.4.1.562.2.4.1.136.10.10 | TabletdmaBcUrOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of the UpperRelay. |
| 1.3.6.1.4.1.562.2.4.1.136.10.10.1 | RowtdmaBcUrOperEntry | not-accessible | mandatory | An entry in the tdmaBcUrOperTable. |
| 1.3.6.1.4.1.562.2.4.1.136.10.10.1.1 | ColumntdmaBcUrRxBufferSize | read-only | mandatory | This attribute indicates the size of the receive flow control buffer. This attribute may be viewed via TdmaBc/*,*,*,* UpperRelay. |
| 1.3.6.1.4.1.562.2.4.1.136.10.10.1.2 | ColumntdmaBcUrTxFlowControlState | read-only | mandatory | This attribute indicates whether the transmit flow control is active or not. This attribute has one of the following values: active: The transmit flow control … |
| 1.3.6.1.4.1.562.2.4.1.136.10.10.1.3 | ColumntdmaBcUrRxFlowControlState | read-only | mandatory | This attribute indicates whether the receive flow control is active or not. This attribute has one of the following values: active: The receive flow control is… |
| 1.3.6.1.4.1.562.2.4.1.136.10.11 | TabletdmaBcUrStatsTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of the UpperRelay. |
| 1.3.6.1.4.1.562.2.4.1.136.10.11.1 | RowtdmaBcUrStatsEntry | not-accessible | mandatory | An entry in the tdmaBcUrStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.136.10.11.1.1 | ColumntdmaBcUrTxFrames | read-only | mandatory | This attribute counts the number of frames that are sent in the transmit direction. The counter wraps when it exceeds the maximum value. The counter wraps when… |
| 1.3.6.1.4.1.562.2.4.1.136.10.11.1.2 | ColumntdmaBcUrRxFrames | read-only | mandatory | This attribute counts the number of frames that are sent in the receive direction. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.2.4.1.136.10.11.1.3 | ColumntdmaBcUrUnacknowledgedFrames | read-only | mandatory | This attribute indicates the current number of frames sent that have not been acknowledged for this instance of the UpperRelay. The counter wraps when it excee… |
| 1.3.6.1.4.1.562.2.4.1.136.10.11.1.4 | ColumntdmaBcUrCumUnacknowledgedFrames | read-only | mandatory | This attribute is the total number of unacknowledged frames for this instance of the UpperRelay. It is not reset when a new call starts. |
| 1.3.6.1.4.1.562.2.4.1.136.101 | TabletdmaBcOperTable | not-accessible | mandatory | This group contains operational attributes concerning the operation of this particular TdmaIwfBearerChannel for the current or most recent call. |
| 1.3.6.1.4.1.562.2.4.1.136.101.1 | RowtdmaBcOperEntry | not-accessible | mandatory | An entry in the tdmaBcOperTable. |
| 1.3.6.1.4.1.562.2.4.1.136.101.1.1 | ColumntdmaBcState | read-only | mandatory | This attribute indicates the current state of the MSC/IWF Interface Protocol (MIP) Message Router (MMR) for an IWF element. This attribute has one of the follo… |
| 1.3.6.1.4.1.562.2.4.1.136.101.1.2 | ColumntdmaBcCallType | read-only | mandatory | This attribute indicates the current call type. This attribute has one of the following values: analogSpeech: Analog speech calls. digitalSpeech: Digital speec… |
| 1.3.6.1.4.1.562.2.4.1.136.101.1.3 | ColumntdmaBcLastResponseCode | read-only | mandatory | This attribute indicates the MSC/IWF Interface Protocol (MIP) Message Router (MMR) response code returned for the last call which was active on this particular… |
| 1.3.6.1.4.1.562.2.4.1.136.101.1.4 | ColumntdmaBcMateBearerChannel | read-only | mandatory | This attribute contains the name of the mate TdmaIwfBearerChannel that this TdmaIwfBearerChannel is involved with in the currently active call. In the case of … |
| 1.3.6.1.4.1.562.2.4.1.136.103 | TabletdmaBcCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.136.103.1 | RowtdmaBcCidDataEntry | not-accessible | mandatory | An entry in the tdmaBcCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.136.103.1.1 | ColumntdmaBcCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.136.104 | TabletdmaBcStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.136.104.1 | RowtdmaBcStateEntry | not-accessible | mandatory | An entry in the tdmaBcStateTable. |
| 1.3.6.1.4.1.562.2.4.1.136.104.1.1 | ColumntdmaBcAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.136.104.1.2 | ColumntdmaBcOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.136.104.1.3 | ColumntdmaBcUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.2.140 | NodetdmaIwfMIB | |||
| 1.3.6.1.4.1.562.2.4.2.140.1 | NodetdmaIwfGroup | |||
| 1.3.6.1.4.1.562.2.4.2.140.1.5 | NodetdmaIwfGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.140.1.5.2 | NodetdmaIwfGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.140.1.5.2.2 | NodetdmaIwfGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.140.3 | NodetdmaIwfCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.140.3.5 | NodetdmaIwfCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.140.3.5.2 | NodetdmaIwfCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.140.3.5.2.2 | NodetdmaIwfCapabilitiesBE01A |