Nortel-Magellan-Passport-VnetEtsiQsigMIB
91 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.115.2 | NodesigChanEQsig | |||
| 1.3.6.1.4.1.562.2.4.1.115.2.1 | TablesigChanEQsigRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of sigChanEQsig components. |
| 1.3.6.1.4.1.562.2.4.1.115.2.1.1 | RowsigChanEQsigRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single sigChanEQsig component. |
| 1.3.6.1.4.1.562.2.4.1.115.2.1.1.1 | ColumnsigChanEQsigRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of sigChanEQsig components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.115.2.1.1.2 | ColumnsigChanEQsigComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.115.2.1.1.4 | ColumnsigChanEQsigStorageType | read-only | mandatory | This variable represents the storage type value for the sigChanEQsig tables. |
| 1.3.6.1.4.1.562.2.4.1.115.2.1.1.10 | ColumnsigChanEQsigIndex | not-accessible | mandatory | This variable represents the index for the sigChanEQsig tables. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2 | NodesigChanEQsigFramer | |||
| 1.3.6.1.4.1.562.2.4.1.115.2.2.1 | TablesigChanEQsigFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of sigChanEQsigFramer components. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1 | RowsigChanEQsigFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single sigChanEQsigFramer component. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1.1 | ColumnsigChanEQsigFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of sigChanEQsigFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1.2 | ColumnsigChanEQsigFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1.4 | ColumnsigChanEQsigFramerStorageType | read-only | mandatory | This variable represents the storage type value for the sigChanEQsigFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1.10 | ColumnsigChanEQsigFramerIndex | not-accessible | mandatory | This variable represents the index for the sigChanEQsigFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.10 | TablesigChanEQsigFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.10.1 | RowsigChanEQsigFramerProvEntry | not-accessible | mandatory | An entry in the sigChanEQsigFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.10.1.1 | ColumnsigChanEQsigFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.12 | TablesigChanEQsigFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1 | RowsigChanEQsigFramerStateEntry | not-accessible | mandatory | An entry in the sigChanEQsigFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.1 | ColumnsigChanEQsigFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.2 | ColumnsigChanEQsigFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.3 | ColumnsigChanEQsigFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13 | TablesigChanEQsigFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1 | RowsigChanEQsigFramerStatsEntry | not-accessible | mandatory | An entry in the sigChanEQsigFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.1 | ColumnsigChanEQsigFramerFrmToIf | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.2 | ColumnsigChanEQsigFramerFrmFromIf | read-only | mandatory | This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.3 | ColumnsigChanEQsigFramerOctetFromIf | read-only | mandatory | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.4 | ColumnsigChanEQsigFramerAborts | read-only | mandatory | This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.5 | ColumnsigChanEQsigFramerCrcErrors | read-only | mandatory | This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.6 | ColumnsigChanEQsigFramerLrcErrors | read-only | mandatory | This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.7 | ColumnsigChanEQsigFramerNonOctetErrors | read-only | mandatory | This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.8 | ColumnsigChanEQsigFramerOverruns | read-only | mandatory | This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.9 | ColumnsigChanEQsigFramerUnderruns | read-only | mandatory | This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum valu… |
| 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.10 | ColumnsigChanEQsigFramerLargeFrmErrors | read-only | mandatory | This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after reaching its maximum val… |
| 1.3.6.1.4.1.562.2.4.1.115.2.11 | TablesigChanEQsigL2Table | not-accessible | mandatory | This group specifies the provisionable layer 2 attributes of the Q.931 ITU-T protocol. |
| 1.3.6.1.4.1.562.2.4.1.115.2.11.1 | RowsigChanEQsigL2Entry | not-accessible | mandatory | An entry in the sigChanEQsigL2Table. |
| 1.3.6.1.4.1.562.2.4.1.115.2.11.1.1 | ColumnsigChanEQsigT23 | read-write | mandatory | This attribute specifies the layer 2 enable request timer. |
| 1.3.6.1.4.1.562.2.4.1.115.2.11.1.2 | ColumnsigChanEQsigT200 | read-write | mandatory | This attribute specifies the maximum time between a layer 2 frame and its acknowledgment. |
| 1.3.6.1.4.1.562.2.4.1.115.2.11.1.3 | ColumnsigChanEQsigN200 | read-write | mandatory | This attribute specifies the maximum number of re-transmissions of a layer 2 frame. |
| 1.3.6.1.4.1.562.2.4.1.115.2.11.1.4 | ColumnsigChanEQsigT203 | read-write | mandatory | This attribute specifies the maximum time for which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive. |
| 1.3.6.1.4.1.562.2.4.1.115.2.11.1.6 | ColumnsigChanEQsigCircuitSwitchedK | read-write | mandatory | This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP… |
| 1.3.6.1.4.1.562.2.4.1.115.2.12 | TablesigChanEQsigL3Table | not-accessible | mandatory | This group represents the provisionable Layer 3 timer attributes of the ETSI Qsig protocol. |
| 1.3.6.1.4.1.562.2.4.1.115.2.12.1 | RowsigChanEQsigL3Entry | not-accessible | mandatory | An entry in the sigChanEQsigL3Table. |
| 1.3.6.1.4.1.562.2.4.1.115.2.12.1.3 | ColumnsigChanEQsigT309 | read-write | mandatory | This attribute specifies the data link failure timer; used to ride out temporary failures. |
| 1.3.6.1.4.1.562.2.4.1.115.2.12.1.4 | ColumnsigChanEQsigT310 | read-write | mandatory | This attribute specifies the call proceeding state timer. |
| 1.3.6.1.4.1.562.2.4.1.115.2.13 | TablesigChanEQsigProvTable | not-accessible | mandatory | This group defines the general options of the D-channel signalling link. |
| 1.3.6.1.4.1.562.2.4.1.115.2.13.1 | RowsigChanEQsigProvEntry | not-accessible | mandatory | An entry in the sigChanEQsigProvTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.13.1.1 | ColumnsigChanEQsigSide | read-write | mandatory | This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the inte… |
| 1.3.6.1.4.1.562.2.4.1.115.2.13.1.2 | ColumnsigChanEQsigMaxNonCallConcurrent | read-write | mandatory | This attribute specifies the maximum number of simultaneous active non-call messages that are allowed. |
| 1.3.6.1.4.1.562.2.4.1.115.2.13.1.3 | ColumnsigChanEQsigOverlapSendingEnabled | read-write | mandatory | This attribute specifies whether overlap sending to the PBX is enabled. |
| 1.3.6.1.4.1.562.2.4.1.115.2.13.1.4 | ColumnsigChanEQsigOverlapReceivingEnabled | read-write | mandatory | This attribute specifies whether overlap receiving from the PBX is enabled. |
| 1.3.6.1.4.1.562.2.4.1.115.2.14 | TablesigChanEQsigStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.115.2.14.1 | RowsigChanEQsigStateEntry | not-accessible | mandatory | An entry in the sigChanEQsigStateTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.14.1.1 | ColumnsigChanEQsigAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.115.2.14.1.2 | ColumnsigChanEQsigOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.115.2.14.1.3 | ColumnsigChanEQsigUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.115.2.15 | TablesigChanEQsigStatsTable | not-accessible | mandatory | This group provides the operational components for the EtsiQsig component. |
| 1.3.6.1.4.1.562.2.4.1.115.2.15.1 | RowsigChanEQsigStatsEntry | not-accessible | mandatory | An entry in the sigChanEQsigStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.15.1.2 | ColumnsigChanEQsigTotalCallsToIf | read-only | mandatory | This attribute counts the total number of calls that have been made to the interface. The value wraps when it reaches its maximum. |
| 1.3.6.1.4.1.562.2.4.1.115.2.15.1.3 | ColumnsigChanEQsigTotalCallsFromIf | read-only | mandatory | This attribute counts the total number of calls from the interface. The value wraps when it reaches its maximum. |
| 1.3.6.1.4.1.562.2.4.1.115.2.15.1.4 | ColumnsigChanEQsigNonCallAssocSessionsToIf | read-only | mandatory | This attribute counts the total number of non-call associated sessions to the interface. The value wraps when it reaches its maximum. |
| 1.3.6.1.4.1.562.2.4.1.115.2.15.1.5 | ColumnsigChanEQsigNonCallAssocSessionsFromIf | read-only | mandatory | This attribute counts the total number of non-call associated sessions from the interface. The value wraps when it reaches its maximum. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16 | TablesigChanEQsigOperTable | not-accessible | mandatory | This group provides the operational attributes for the EtsiQsig protocol. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16.1 | RowsigChanEQsigOperEntry | not-accessible | mandatory | An entry in the sigChanEQsigOperTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16.1.1 | ColumnsigChanEQsigActiveChannels | read-only | mandatory | This attribute indicates the number of currently active channels. This includes data and voice channels. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16.1.2 | ColumnsigChanEQsigActiveVoiceChannels | read-only | mandatory | This attribute indicates the number of channels that are currently carrying voice. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16.1.3 | ColumnsigChanEQsigActiveDataChannels | read-only | mandatory | This attribute indicates the number of channels that are currently carrying data. This does not include modem data. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16.1.4 | ColumnsigChanEQsigPeakActiveChannels | read-only | mandatory | This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16.1.5 | ColumnsigChanEQsigPeakActiveVoiceChannels | read-only | mandatory | This attribute indicates the maximum number of voice channels that have been active on this signalling channel during the last polling period. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16.1.6 | ColumnsigChanEQsigPeakActiveDataChannels | read-only | mandatory | This attribute indicates the maximum number of data channels that have been active on this signalling channel during the last polling period. |
| 1.3.6.1.4.1.562.2.4.1.115.2.16.1.7 | ColumnsigChanEQsigDChanStatus | read-only | mandatory | This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that th… |
| 1.3.6.1.4.1.562.2.4.1.115.2.17 | TablesigChanEQsigToolsTable | not-accessible | mandatory | This contains a series of operational attributes which turn on and off several kinds of tracing. |
| 1.3.6.1.4.1.562.2.4.1.115.2.17.1 | RowsigChanEQsigToolsEntry | not-accessible | mandatory | An entry in the sigChanEQsigToolsTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.17.1.1 | ColumnsigChanEQsigTracing | read-write | mandatory | This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages th… |
| 1.3.6.1.4.1.562.2.4.1.115.2.18 | TablesigChanEQsigEQsigSpecificProvTable | not-accessible | mandatory | This group provides EtsiQsig protocol specific provisioning. |
| 1.3.6.1.4.1.562.2.4.1.115.2.18.1 | RowsigChanEQsigEQsigSpecificProvEntry | not-accessible | mandatory | An entry in the sigChanEQsigEQsigSpecificProvTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.18.1.1 | ColumnsigChanEQsigMsgSegmentation | read-write | mandatory | This attribute allows users to enable/disable the EtsiQsig message segmentation service. |
| 1.3.6.1.4.1.562.2.4.1.115.2.18.1.2 | ColumnsigChanEQsigE1ChannelNumbers | read-write | mandatory | This attribute is applicable to E1 interfaces only. It specifies the mapping scheme between channel numbers (identified in Layer 3 messages) and timeslot numbe… |
| 1.3.6.1.4.1.562.2.4.1.115.2.19 | TablesigChanEQsigEQsigSpecificOpTable | not-accessible | mandatory | This group provides specific operational attributes for the Etsi Qsig protocol. |
| 1.3.6.1.4.1.562.2.4.1.115.2.19.1 | RowsigChanEQsigEQsigSpecificOpEntry | not-accessible | mandatory | An entry in the sigChanEQsigEQsigSpecificOpTable. |
| 1.3.6.1.4.1.562.2.4.1.115.2.19.1.1 | ColumnsigChanEQsigSegmentationAccepted | read-only | mandatory | This attribute counts the total number of times a long Etsi Qsig message has been received from a PBX and forwarded to a Passport subnet. The value wraps when … |
| 1.3.6.1.4.1.562.2.4.1.115.2.19.1.2 | ColumnsigChanEQsigSegmentationFailed | read-only | mandatory | This attribute counts the total number of times a long Etsi Qsig message has been received from a PBX and could not be forwarded as is to a Passport subnet due… |
| 1.3.6.1.4.1.562.2.4.2.110 | NodevnetEtsiQsigMIB | |||
| 1.3.6.1.4.1.562.2.4.2.110.1 | NodevnetEtsiQsigGroup | |||
| 1.3.6.1.4.1.562.2.4.2.110.1.5 | NodevnetEtsiQsigGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.110.1.5.2 | NodevnetEtsiQsigGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.110.1.5.2.2 | NodevnetEtsiQsigGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.110.3 | NodevnetEtsiQsigCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.110.3.5 | NodevnetEtsiQsigCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.110.3.5.2 | NodevnetEtsiQsigCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.110.3.5.2.2 | NodevnetEtsiQsigCapabilitiesBE01A |