Nortel-Magellan-Passport-VoiceMIB
244 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex PassportCounter64 RowStatus StorageType Unsigned32 |
| Nortel-Magellan-Passport-TextualConventionsMIB | AsciiString EnterpriseDateAndTime FixedPoint1 HexString Link NonReplicated |
| Nortel-Magellan-Passport-UsefulDefinitionsMIB | components passportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.80 | Nodevs | |||
| 1.3.6.1.4.1.562.2.4.1.80.1 | TablevsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of vs components. |
| 1.3.6.1.4.1.562.2.4.1.80.1.1 | RowvsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single vs component. |
| 1.3.6.1.4.1.562.2.4.1.80.1.1.1 | ColumnvsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of vs components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.80.1.1.2 | ColumnvsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.80.1.1.4 | ColumnvsStorageType | read-only | mandatory | This variable represents the storage type value for the vs tables. |
| 1.3.6.1.4.1.562.2.4.1.80.1.1.10 | ColumnvsIndex | not-accessible | mandatory | This variable represents the index for the vs tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2 | NodevsFramer | |||
| 1.3.6.1.4.1.562.2.4.1.80.2.1 | TablevsFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of vsFramer components. |
| 1.3.6.1.4.1.562.2.4.1.80.2.1.1 | RowvsFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single vsFramer component. |
| 1.3.6.1.4.1.562.2.4.1.80.2.1.1.1 | ColumnvsFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of vsFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.80.2.1.1.2 | ColumnvsFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.80.2.1.1.4 | ColumnvsFramerStorageType | read-only | mandatory | This variable represents the storage type value for the vsFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2.1.1.10 | ColumnvsFramerIndex | not-accessible | mandatory | This variable represents the index for the vsFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2.5 | NodevsFramerVfpDebug | |||
| 1.3.6.1.4.1.562.2.4.1.80.2.5.1 | TablevsFramerVfpDebugRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of vsFramerVfpDebug components. |
| 1.3.6.1.4.1.562.2.4.1.80.2.5.1.1 | RowvsFramerVfpDebugRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single vsFramerVfpDebug component. |
| 1.3.6.1.4.1.562.2.4.1.80.2.5.1.1.1 | ColumnvsFramerVfpDebugRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of vsFramerVfpDebug components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.80.2.5.1.1.2 | ColumnvsFramerVfpDebugComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.80.2.5.1.1.4 | ColumnvsFramerVfpDebugStorageType | read-only | mandatory | This variable represents the storage type value for the vsFramerVfpDebug tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2.5.1.1.10 | ColumnvsFramerVfpDebugIndex | not-accessible | mandatory | This variable represents the index for the vsFramerVfpDebug tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2.6 | NodevsFramerMvpDebug | |||
| 1.3.6.1.4.1.562.2.4.1.80.2.6.1 | TablevsFramerMvpDebugRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of vsFramerMvpDebug components. |
| 1.3.6.1.4.1.562.2.4.1.80.2.6.1.1 | RowvsFramerMvpDebugRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single vsFramerMvpDebug component. |
| 1.3.6.1.4.1.562.2.4.1.80.2.6.1.1.1 | ColumnvsFramerMvpDebugRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of vsFramerMvpDebug components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.80.2.6.1.1.2 | ColumnvsFramerMvpDebugComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.80.2.6.1.1.4 | ColumnvsFramerMvpDebugStorageType | read-only | mandatory | This variable represents the storage type value for the vsFramerMvpDebug tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2.6.1.1.10 | ColumnvsFramerMvpDebugIndex | not-accessible | mandatory | This variable represents the index for the vsFramerMvpDebug tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2.7 | NodevsFramerPcmCapture | |||
| 1.3.6.1.4.1.562.2.4.1.80.2.7.1 | TablevsFramerPcmCaptureRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of vsFramerPcmCapture components. |
| 1.3.6.1.4.1.562.2.4.1.80.2.7.1.1 | RowvsFramerPcmCaptureRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single vsFramerPcmCapture component. |
| 1.3.6.1.4.1.562.2.4.1.80.2.7.1.1.1 | ColumnvsFramerPcmCaptureRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of vsFramerPcmCapture components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.80.2.7.1.1.2 | ColumnvsFramerPcmCaptureComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.80.2.7.1.1.4 | ColumnvsFramerPcmCaptureStorageType | read-only | mandatory | This variable represents the storage type value for the vsFramerPcmCapture tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2.7.1.1.10 | ColumnvsFramerPcmCaptureIndex | not-accessible | mandatory | This variable represents the index for the vsFramerPcmCapture tables. |
| 1.3.6.1.4.1.562.2.4.1.80.2.10 | TablevsFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.80.2.10.1 | RowvsFramerProvEntry | not-accessible | mandatory | An entry in the vsFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.10.1.1 | ColumnvsFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12 | TablevsFramerCoderTable | not-accessible | mandatory | This group contains attributes which specify how audio data on a channel is encoded and decoded. |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1 | RowvsFramerCoderEntry | not-accessible | mandatory | An entry in the vsFramerCoderTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.1 | ColumnvsFramerMaxVoiceBitRate | read-write | mandatory | This attribute specifies the maximum desired ingress bit rate used during voice traffic when voiceEncoding is g711G726. The negotiated maximum ingress voice ra… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.2 | ColumnvsFramerMinVoiceBitRate | read-write | mandatory | This attribute specifies the minimum desired ingress bit rate used during voice traffic when voiceEncoding is g711G726. The negotiated minimum ingress voice ra… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.3 | ColumnvsFramerMaxModemBitRate | read-write | mandatory | This attribute specifies the maximum desired ingress rate used during modemFax and/or fax traffic. Voice traffic is all traffic from the start of a call or spe… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.4 | ColumnvsFramerMinModemBitRate | read-write | mandatory | This attribute specifies the minimum desired ingress rate used during modemFax and/or fax traffic. Voice traffic is all traffic from the start of a call or spe… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.5 | ColumnvsFramerAudioGain | read-write | obsolete | This attribute has been migrated to egressAudioGain. |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.6 | ColumnvsFramerSilenceSuppression | read-write | mandatory | This attribute specifies when ingress silence suppression is desired during voice traffic. If silenceSuppression is off, silence suppression is never desired. … |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.7 | ColumnvsFramerEchoCancellation | read-write | mandatory | This attribute specifies whether echo cancellation is performed on this VoiceService. If echoCancellation is on, the internal echo canceller is enabled and ech… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.9 | ColumnvsFramerALawConversion | read-write | mandatory | This attribute specifies whether mu-law to A-law PCM conversion is performed. aLawConversion only needs to be set to on when this voice service is running on a… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.11 | ColumnvsFramerVoiceEncoding | read-write | mandatory | This attribute specifies how ingress voice traffic is encoded. If voiceEncoding is g711G726, ingress voice traffic is encoded using either pulse code modulatio… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.12 | ColumnvsFramerFaxEncoding | read-write | mandatory | This attribute specifies how ingress modemFax and fax traffic are encoded. Voice traffic is all traffic from the start of a call or speech until a 2100 Hz tone… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.13 | ColumnvsFramerTandemPassThrough | read-write | mandatory | This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if possible. If tandemPassThrough… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.14 | ColumnvsFramerInsertedOutputDelay | read-write | mandatory | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to voice, modem and fax traffic. It… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.15 | ColumnvsFramerEgressAudioGain | read-write | obsolete | This attribute has been migrated to ingressAudioGain. |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.16 | ColumnvsFramerFaxIdleSuppressionG711G726 | read-write | mandatory | This attribute specifies whether ingress fax idle suppression is desired during G.711 and G.726 fax traffic. It applies only if modemFaxEncoding is g711G726 or… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.17 | ColumnvsFramerEndOfCallPattern | read-write | mandatory | This attribute specifies the pattern that indicates the end of a CCS call. The pattern is specified as a hexadecimal byte. If this pattern is detected for one … |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.18 | ColumnvsFramerIngressAudioGain | read-write | mandatory | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voic… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.19 | ColumnvsFramerEgressGain | read-write | mandatory | This attribute specifies the gain in dB that is applied to data before it leaves the network. It applies to voice, modem and fax traffic. For example, egress g… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.20 | ColumnvsFramerComfortNoiseCap | read-write | mandatory | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap before egressAudioGain is appli… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.21 | ColumnvsFramerEchoTailDelay | read-write | mandatory | This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the round trip delay of echo and hy… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.22 | ColumnvsFramerEchoReturnLoss | read-write | mandatory | This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions. If the line quality is poor, … |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.34 | ColumnvsFramerDtmfRegeneration | read-write | mandatory | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfRegeneration is on, it is desire… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.35 | ColumnvsFramerSpeechHangoverTime | read-write | mandatory | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. It is not used unless negotiated… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.36 | ColumnvsFramerFaxHangoverTimeG711G726 | read-write | mandatory | This attribute specifies the time after the end of fax traffic before ingress G.711/G.726 fax idle suppression starts. It applies only if modemFaxEncoding is g… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.37 | ColumnvsFramerModemFaxSpeechDiscrim | read-write | mandatory | This attribute specifies whether this VoiceService differentiates modemFax traffic and speech. If modemFaxSpeechDiscrim is on and a false 2100 Hz tone is detec… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.39 | ColumnvsFramerV17EncodedAsG711G726 | read-write | mandatory | This attribute specifies the desired negotiation between this VoiceService and V.17 fax machines when modemFaxEncoding is faxRelayG711G726. This attribute is n… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.40 | ColumnvsFramerEcanBypassMode | read-write | mandatory | This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceService. This attribute only applies if echoCancellatio… |
| 1.3.6.1.4.1.562.2.4.1.80.2.12.1.41 | ColumnvsFramerMaxFaxRelayRate | read-write | mandatory | This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or faxRelayG711G726. The maximum f… |
| 1.3.6.1.4.1.562.2.4.1.80.2.13 | TablevsFramerSignalTable | not-accessible | mandatory | This group contains attributes which define the means for transporting channel associated signalling through the network. |
| 1.3.6.1.4.1.562.2.4.1.80.2.13.1 | RowvsFramerSignalEntry | not-accessible | mandatory | An entry in the vsFramerSignalTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.13.1.1 | ColumnvsFramerTransmitBusyYellow | read-write | mandatory | When this attribute is set to yes and the DS1 or E1 line is set to Channel Associated Signaling (CAS) mode, a 'busy-out' signaling condition is transmitted ont… |
| 1.3.6.1.4.1.562.2.4.1.80.2.13.1.2 | ColumnvsFramerTransportSignalling | read-write | obsolete | This attribute, in combination with interpretSignalling, has been migrated to casSignalling. |
| 1.3.6.1.4.1.562.2.4.1.80.2.13.1.3 | ColumnvsFramerInterpretSignalling | read-write | obsolete | This attribute, in combination with transportSignalling, has been migrated to casSignalling. |
| 1.3.6.1.4.1.562.2.4.1.80.2.13.1.4 | ColumnvsFramerInvertBits | read-write | mandatory | This attribute specifies whether the ABCD bits are inverted before being output onto the link. |
| 1.3.6.1.4.1.562.2.4.1.80.2.13.1.5 | ColumnvsFramerSignalBits | read-write | mandatory | This attribute identifies the combination of ABCD bits used for channel associated signalling. If casSignalling is transparent, signalBits must have the same v… |
| 1.3.6.1.4.1.562.2.4.1.80.2.13.1.7 | ColumnvsFramerTransmitCasYellow | read-write | mandatory | When the associated DS1 or E1 line is operating in CCS mode, this attribute is not applicable, and must be set to no. Normally, all the VoiceService Framers as… |
| 1.3.6.1.4.1.562.2.4.1.80.2.13.1.8 | ColumnvsFramerCasSignalling | read-write | mandatory | This attribute specifies how channel associated signalling information is transported through the network. none specifies that channel associated signalling in… |
| 1.3.6.1.4.1.562.2.4.1.80.2.14 | TablevsFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.80.2.14.1 | RowvsFramerStateEntry | not-accessible | mandatory | An entry in the vsFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.14.1.1 | ColumnvsFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.80.2.14.1.2 | ColumnvsFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.80.2.14.1.3 | ColumnvsFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.80.2.15 | TablevsFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1 | RowvsFramerStatsEntry | not-accessible | mandatory | An entry in the vsFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.1 | ColumnvsFramerTotalCells | read-only | mandatory | This attribute counts total cells received from the interface. Each cell contains 44 bytes of data from the DS0 channel. Since a DS0 provides data at 64 kbit/s… |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.2 | ColumnvsFramerAudioCells | read-only | mandatory | This attribute counts total cells containing audio data received from the interface. Audio data includes cells containing voice as well as modem audio but not … |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.4 | ColumnvsFramerSilenceCells | read-only | mandatory | This attribute counts total cells containing silence (speech or modem/fax) data received from the interface which was not forwarded into the network, thus savi… |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.5 | ColumnvsFramerModemCells | read-only | obsolete | This attribute is migrated into modemFaxCells. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.6 | ColumnvsFramerCurrentEncodingRate | read-only | obsolete | This attribute has been migrated to currentRate in Operational group. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.7 | ColumnvsFramerLrcErrors | read-only | mandatory | This attribute counts the number of frames with LRC errors that are received from the network. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.8 | ColumnvsFramerFrmLostInNetwork | read-only | mandatory | This attribute counts the number of frames which the service knows it did not receive from the network although they were sent in to the network from the remot… |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.9 | ColumnvsFramerFrmUnderRuns | read-only | mandatory | This attribute counts the number of times that a frame was needed but was not available because it had been delayed too long in the network. This error may occ… |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.10 | ColumnvsFramerFrmDumped | read-only | mandatory | This attribute counts the number of frames which have been dumped because the output queue grew too large. This can occur if the clock rate on the incoming int… |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.26 | ColumnvsFramerModemSilenceCells | read-only | obsolete | This attribute is migrated into faxIdleCells. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.27 | ColumnvsFramerTptStatus | read-only | obsolete | This attribute has been migrated to tptStatus in Operational group. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.28 | ColumnvsFramerCurrentEncoding | read-only | obsolete | This attribute has been migrated to currentEncoding in Operational group. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.29 | ColumnvsFramerRecentIngressLineSamples | read-only | obsolete | This attribute has been migrated to recentIngressLineSamples in Operational group. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.30 | ColumnvsFramerSentMinVoiceG711G726Rate | read-only | obsolete | This attribute has been migrated to negotiatedIgRates. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.31 | ColumnvsFramerSentMinModemFaxG711G726Rate | read-only | obsolete | This attribute has been migrated to negotiatedIgRates. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.32 | ColumnvsFramerSentFaxIdleSuppressionG711G726 | read-only | obsolete | This attribute has been migrated to negotiatedIgFisG711G726. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.33 | ColumnvsFramerSentSilenceSuppression | read-only | obsolete | This attribute has been migrated to negotiatedIgSilenceSuppression. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.42 | ColumnvsFramerFaxRelayCells | read-only | mandatory | This attribute counts total fax relay cells sent to the network. |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.43 | ColumnvsFramerModemFaxCells | read-only | mandatory | This attribute counts total cells containing modem or fax data received from the interface. A cell contains 44 bytes of data from the DS0 channel (5.5 ms). Thi… |
| 1.3.6.1.4.1.562.2.4.1.80.2.15.1.44 | ColumnvsFramerFaxIdleCells | read-only | mandatory | This attribute counts total cells containing silent modem or fax data received from the interface which was not forwarded into the network, thus saving bandwid… |
| 1.3.6.1.4.1.562.2.4.1.80.2.16 | TablevsFramerNegTable | not-accessible | mandatory | This group contains attributes indicating the results of end to end negotiation. |
| 1.3.6.1.4.1.562.2.4.1.80.2.16.1 | RowvsFramerNegEntry | not-accessible | mandatory | An entry in the vsFramerNegTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.16.1.1 | ColumnvsFramerNegotiatedIgSilenceSuppression | read-only | mandatory | This attribute indicates the result of negotiating ingress silence suppression with the remote end across the subnet. The parameter used for negotiating with t… |
| 1.3.6.1.4.1.562.2.4.1.80.2.16.1.2 | ColumnvsFramerNegotiatedIgFisG711G726 | read-only | mandatory | This attribute indicates the result of negotiating ingress G.711/G.726 fax idle suppression with the remote end across the subnet. The parameter used for negot… |
| 1.3.6.1.4.1.562.2.4.1.80.2.16.1.3 | ColumnvsFramerNegotiatedDtmfRegeneration | read-only | mandatory | This attribute indicates the result of negotiating DTMF regeneration with the remote end across the subnet. The parameter used for negotiating with the remote … |
| 1.3.6.1.4.1.562.2.4.1.80.2.16.1.4 | ColumnvsFramerNegotiatedV17AsG711G726 | read-only | mandatory | This attribute indicates how this VoiceService negotiates with V.17 fax machines, as determined by negotiation with the remote end across the subnet. The param… |
| 1.3.6.1.4.1.562.2.4.1.80.2.16.1.5 | ColumnvsFramerNegotiatedTandemPassThrough | read-only | mandatory | This attribute indicates the result of negotiating tandem pass through with the remote end across the subnet. The parameter used for negotiating with the remot… |
| 1.3.6.1.4.1.562.2.4.1.80.2.17 | TablevsFramerOperTable | not-accessible | mandatory | This group contains the operational data for a Vs Framer. |
| 1.3.6.1.4.1.562.2.4.1.80.2.17.1 | RowvsFramerOperEntry | not-accessible | mandatory | An entry in the vsFramerOperTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.17.1.1 | ColumnvsFramerOpCurrentEncoding | read-only | mandatory | This attribute indicates the encoding currently being performed. g711 indicates that pulse code modulation (PCM) defined by ITU-T G.711 is being performed. g72… |
| 1.3.6.1.4.1.562.2.4.1.80.2.17.1.2 | ColumnvsFramerCurrentRate | read-only | mandatory | This attribute indicates the current encoding rate for frames being sent to the network. |
| 1.3.6.1.4.1.562.2.4.1.80.2.17.1.3 | ColumnvsFramerOpTptStatus | read-only | mandatory | This attribute indicates the current status of the tandem pass through algorithm. If tptStatus is operating, the tandem pass through algorithm is cutting throu… |
| 1.3.6.1.4.1.562.2.4.1.80.2.17.1.4 | ColumnvsFramerOpRecentIngressLineSamples | read-only | mandatory | This attribute indicates two recent ingress line samples, represented as four hex digits. The first two hex digits give one sample. The last two hex digits giv… |
| 1.3.6.1.4.1.562.2.4.1.80.2.204 | TablevsFramerIdleCodeTable | not-accessible | mandatory | This attribute specifies the ABCD idle line signalling code. This attribute must be set correctly when casSignalling is interpret. |
| 1.3.6.1.4.1.562.2.4.1.80.2.204.1 | RowvsFramerIdleCodeEntry | not-accessible | mandatory | An entry in the vsFramerIdleCodeTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.204.1.1 | ColumnvsFramerIdleCodeIndex | not-accessible | mandatory | This variable represents the vsFramerIdleCodeTable specific index for the vsFramerIdleCodeTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.204.1.2 | ColumnvsFramerIdleCodeValue | read-write | mandatory | This variable represents an individual value for the vsFramerIdleCodeTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.205 | TablevsFramerSeizeCodeTable | not-accessible | mandatory | This attribute specifies the ABCD seized line signalling code. This attribute must be set correctly when casSignalling is interpret. |
| 1.3.6.1.4.1.562.2.4.1.80.2.205.1 | RowvsFramerSeizeCodeEntry | not-accessible | mandatory | An entry in the vsFramerSeizeCodeTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.205.1.1 | ColumnvsFramerSeizeCodeIndex | not-accessible | mandatory | This variable represents the vsFramerSeizeCodeTable specific index for the vsFramerSeizeCodeTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.205.1.2 | ColumnvsFramerSeizeCodeValue | read-write | mandatory | This variable represents an individual value for the vsFramerSeizeCodeTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.206 | TablevsFramerFrmToNetworkTable | not-accessible | mandatory | This attribute counts the number of frames sent to the network at each encoding rate. Fax relay cells are not included. |
| 1.3.6.1.4.1.562.2.4.1.80.2.206.1 | RowvsFramerFrmToNetworkEntry | not-accessible | mandatory | An entry in the vsFramerFrmToNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.206.1.1 | ColumnvsFramerFrmToNetworkIndex | not-accessible | mandatory | This variable represents the vsFramerFrmToNetworkTable specific index for the vsFramerFrmToNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.206.1.2 | ColumnvsFramerFrmToNetworkValue | read-only | mandatory | This variable represents an individual value for the vsFramerFrmToNetworkTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.438 | TablevsFramerNEncodingTable | not-accessible | mandatory | This attribute indicates the results of negotiating ingress audio call encodings for voice, modemFax and fax traffic with the remote end across the subnet. The… |
| 1.3.6.1.4.1.562.2.4.1.80.2.438.1 | RowvsFramerNEncodingEntry | not-accessible | mandatory | An entry in the vsFramerNEncodingTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.438.1.1 | ColumnvsFramerNEncodingIndex | not-accessible | mandatory | This variable represents the vsFramerNEncodingTable specific index for the vsFramerNEncodingTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.438.1.2 | ColumnvsFramerNEncodingValue | read-only | mandatory | This variable represents an individual value for the vsFramerNEncodingTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.439 | TablevsFramerNRatesTable | not-accessible | mandatory | This attribute indicates the results of negotiating ingress minimum and maximum rates for voice, modemFax and fax traffic with the remote end across the subnet… |
| 1.3.6.1.4.1.562.2.4.1.80.2.439.1 | RowvsFramerNRatesEntry | not-accessible | mandatory | An entry in the vsFramerNRatesTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.439.1.1 | ColumnvsFramerNRatesTrafficIndex | not-accessible | mandatory | This variable represents the next to last index for the vsFramerNRatesTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.439.1.2 | ColumnvsFramerNRatesRateIndex | not-accessible | mandatory | This variable represents the final index for the vsFramerNRatesTable. |
| 1.3.6.1.4.1.562.2.4.1.80.2.439.1.3 | ColumnvsFramerNRatesValue | read-only | mandatory | This variable represents an individual value for the vsFramerNRatesTable. |
| 1.3.6.1.4.1.562.2.4.1.80.3 | NodevsPlc | |||
| 1.3.6.1.4.1.562.2.4.1.80.3.1 | TablevsPlcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of vsPlc components. |
| 1.3.6.1.4.1.562.2.4.1.80.3.1.1 | RowvsPlcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single vsPlc component. |
| 1.3.6.1.4.1.562.2.4.1.80.3.1.1.1 | ColumnvsPlcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of vsPlc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.80.3.1.1.2 | ColumnvsPlcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.80.3.1.1.4 | ColumnvsPlcStorageType | read-only | mandatory | This variable represents the storage type value for the vsPlc tables. |
| 1.3.6.1.4.1.562.2.4.1.80.3.1.1.10 | ColumnvsPlcIndex | not-accessible | mandatory | This variable represents the index for the vsPlc tables. |
| 1.3.6.1.4.1.562.2.4.1.80.3.10 | TablevsPlcProvTable | not-accessible | mandatory | This group contains all provisionable attributes for a permanent logical connection. Note that all of the attributes are valid and provisionable on both ends o… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1 | RowvsPlcProvEntry | not-accessible | mandatory | An entry in the vsPlcProvTable. |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.2 | ColumnvsPlcRemoteName | read-write | mandatory | This attribute is the PLC's remote end point's address in the format of a Passport component name The syntax of a component is: 'em/node type/instance'. End po… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.3 | ColumnvsPlcSetupPriority | read-write | mandatory | This attribute gives the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS establishes a path through the… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.4 | ColumnvsPlcHoldingPriority | read-write | mandatory | This attribute gives the priority that a path holds once it is established. Zero is the highest priority and four is the lowest. A path's holdingPriority deter… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.5 | ColumnvsPlcRequiredTxBandwidth | read-write | mandatory | This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route.This attribute represents the bandwidth for traff… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.6 | ColumnvsPlcRequiredRxBandwidth | read-write | mandatory | This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute represents the bandwidth for traffic … |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.7 | ColumnvsPlcRequiredTrafficType | read-write | mandatory | This attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.8 | ColumnvsPlcPermittedTrunkTypes | read-write | mandatory | This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have been defined, leaving six(6) r… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.9 | ColumnvsPlcRequiredSecurity | read-write | mandatory | This attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.10 | ColumnvsPlcRequiredCustomerParm | read-write | mandatory | This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to seven, is chosen by network admini… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.11 | ColumnvsPlcPathAttributeToMinimize | read-write | mandatory | This attribute indicates whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and a delay metric associated with… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.12 | ColumnvsPlcMaximumAcceptableCost | read-write | mandatory | This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the route. The cost metric is the … |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.13 | ColumnvsPlcMaximumAcceptableDelay | read-write | mandatory | This attribute indicates an upper bound on the delay of a route, which is the sum of the delay of all trunks on the route. It should be provisioned with a reas… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.14 | ColumnvsPlcEmissionPriority | read-write | mandatory | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of Zero(0) indicates the highest e… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.15 | ColumnvsPlcDiscardPriority | read-write | mandatory | This attribute indicates the importance of the packets on the path. One is used for paths carrying the most important traffic, and three is used for paths carr… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.16 | ColumnvsPlcPathType | read-write | mandatory | This attribute specifies if the path for this PLC is determined automatically or by static provisioning. The default (normal) is to automatically choose a rout… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.17 | ColumnvsPlcPathFailureAction | read-write | mandatory | This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is selected. If disconnectConnection i… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.18 | ColumnvsPlcBumpPreference | read-write | mandatory | This attribute controls when bumping occurs in the route selection process. A connection with higher (numerically less) setupPriority may bump a connection wit… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.19 | ColumnvsPlcOptimization | read-write | mandatory | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as op… |
| 1.3.6.1.4.1.562.2.4.1.80.3.207 | TablevsPlcMpathTable | not-accessible | mandatory | This attribute is optional and specifies the sequence of trunks to be used as the route for the path, thus bypassing PORS' automatic route selection. If the pa… |
| 1.3.6.1.4.1.562.2.4.1.80.3.207.1 | RowvsPlcMpathEntry | not-accessible | mandatory | An entry in the vsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.80.3.207.1.1 | ColumnvsPlcMpathIndex | not-accessible | mandatory | This variable represents the vsPlcMpathTable specific index for the vsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.80.3.207.1.2 | ColumnvsPlcMpathValue | read-write | mandatory | This variable represents an individual value for the vsPlcMpathTable. |
| 1.3.6.1.4.1.562.2.4.1.80.4 | NodevsLCo | |||
| 1.3.6.1.4.1.562.2.4.1.80.4.1 | TablevsLCoRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of vsLCo components. |
| 1.3.6.1.4.1.562.2.4.1.80.4.1.1 | RowvsLCoRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single vsLCo component. |
| 1.3.6.1.4.1.562.2.4.1.80.4.1.1.1 | ColumnvsLCoRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of vsLCo components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.80.4.1.1.2 | ColumnvsLCoComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.80.4.1.1.4 | ColumnvsLCoStorageType | read-only | mandatory | This variable represents the storage type value for the vsLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.80.4.1.1.10 | ColumnvsLCoIndex | not-accessible | mandatory | This variable represents the index for the vsLCo tables. |
| 1.3.6.1.4.1.562.2.4.1.80.4.10 | TablevsLCoPathDataTable | not-accessible | mandatory | This group contains all operational attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1 | RowvsLCoPathDataEntry | not-accessible | mandatory | An entry in the vsLCoPathDataTable. |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.1 | ColumnvsLCoState | read-only | mandatory | This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end provisioned or the application ha… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.2 | ColumnvsLCoOverrideRemoteName | read-write | mandatory | If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unloc… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.3 | ColumnvsLCoEnd | read-only | mandatory | This attribute identifies whether this is the calling or called end of the path. |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.4 | ColumnvsLCoCostMetric | read-only | mandatory | This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was est… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.5 | ColumnvsLCoDelayMetric | read-only | mandatory | This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the pa… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.6 | ColumnvsLCoRoundTripDelay | read-only | mandatory | This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.7 | ColumnvsLCoSetupPriority | read-only | mandatory | This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complem… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.8 | ColumnvsLCoHoldingPriority | read-only | mandatory | This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.9 | ColumnvsLCoRequiredTxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidt… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.10 | ColumnvsLCoRequiredRxBandwidth | read-only | mandatory | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth fo… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.11 | ColumnvsLCoRequiredTrafficType | read-only | mandatory | This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one … |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.12 | ColumnvsLCoPermittedTrunkTypes | read-only | mandatory | This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terr… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.13 | ColumnvsLCoRequiredSecurity | read-only | mandatory | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secu… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.14 | ColumnvsLCoRequiredCustomerParameter | read-only | mandatory | This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer define… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.15 | ColumnvsLCoEmissionPriority | read-only | mandatory | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the e… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.16 | ColumnvsLCoDiscardPriority | read-only | mandatory | This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying t… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.17 | ColumnvsLCoPathType | read-only | mandatory | This attribute indicates whether the path for this PLC was determined automatically or by static provisioning. Normal pathTypes are selected automatically by R… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.18 | ColumnvsLCoRetryCount | read-only | mandatory | This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.19 | ColumnvsLCoPathFailureCount | read-only | mandatory | This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the path is up. If a path fails anytim… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.20 | ColumnvsLCoReasonForNoRoute | read-only | mandatory | This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-expla… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.21 | ColumnvsLCoLastTearDownReason | read-only | mandatory | This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This att… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.22 | ColumnvsLCoPathFailureAction | read-only | mandatory | This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is di… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.23 | ColumnvsLCoBumpPreference | read-only | mandatory | This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connect… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.24 | ColumnvsLCoOptimization | read-only | mandatory | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as op… |
| 1.3.6.1.4.1.562.2.4.1.80.4.10.1.25 | ColumnvsLCoPathUpDateTime | read-only | mandatory | This is the time stamp when the current path was established or reestablished. |
| 1.3.6.1.4.1.562.2.4.1.80.4.11 | TablevsLCoStatsTable | not-accessible | mandatory | This group contains the operational statistics attributes for the path oriented LCo. |
| 1.3.6.1.4.1.562.2.4.1.80.4.11.1 | RowvsLCoStatsEntry | not-accessible | mandatory | An entry in the vsLCoStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.80.4.11.1.1 | ColumnvsLCoPktsToNetwork | read-only | mandatory | This attribute counts the number of packets transmitted to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.80.4.11.1.2 | ColumnvsLCoBytesToNetwork | read-only | mandatory | This attribute counts the number of bytes sent to the network over this Logical Connection. |
| 1.3.6.1.4.1.562.2.4.1.80.4.11.1.3 | ColumnvsLCoPktsFromNetwork | read-only | mandatory | This attribute counts the number of packets received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.80.4.11.1.4 | ColumnvsLCoBytesFromNetwork | read-only | mandatory | This attribute counts the number of bytes received from the remote LCo via the network. |
| 1.3.6.1.4.1.562.2.4.1.80.4.264 | TablevsLCoPathTable | not-accessible | mandatory | This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path. |
| 1.3.6.1.4.1.562.2.4.1.80.4.264.1 | RowvsLCoPathEntry | not-accessible | mandatory | An entry in the vsLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.80.4.264.1.1 | ColumnvsLCoPathValue | read-only | mandatory | This variable represents both the value and the index for the vsLCoPathTable. |
| 1.3.6.1.4.1.562.2.4.1.80.10 | TablevsCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.80.10.1 | RowvsCidDataEntry | not-accessible | mandatory | An entry in the vsCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.80.10.1.1 | ColumnvsCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.80.11 | TablevsIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.80.11.1 | RowvsIfEntryEntry | not-accessible | mandatory | An entry in the vsIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.80.11.1.1 | ColumnvsIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.80.11.1.2 | ColumnvsIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.80.12 | TablevsOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.80.12.1 | RowvsOperStatusEntry | not-accessible | mandatory | An entry in the vsOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.80.12.1.1 | ColumnvsSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.80.13 | TablevsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.80.13.1 | RowvsStateEntry | not-accessible | mandatory | An entry in the vsStateTable. |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.1 | ColumnvsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.2 | ColumnvsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.3 | ColumnvsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.4 | ColumnvsAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.5 | ColumnvsProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.6 | ColumnvsControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.7 | ColumnvsAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.8 | ColumnvsStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.80.13.1.9 | ColumnvsUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.80.15 | TablevsOperationalTable | not-accessible | mandatory | This group contains operational attributes related to a Vs. |
| 1.3.6.1.4.1.562.2.4.1.80.15.1 | RowvsOperationalEntry | not-accessible | mandatory | An entry in the vsOperationalTable. |
| 1.3.6.1.4.1.562.2.4.1.80.15.1.1 | ColumnvsServiceFailureReason | read-only | mandatory | This attribute indicates the result of end to end negotiation with the remote end across the subnet. If serviceFailureReason is undetermined, this Vs has not p… |
| 1.3.6.1.4.1.562.2.4.2.49 | NodevoiceMIB | |||
| 1.3.6.1.4.1.562.2.4.2.49.1 | NodevoiceGroup | |||
| 1.3.6.1.4.1.562.2.4.2.49.1.5 | NodevoiceGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.49.1.5.2 | NodevoiceGroupBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.49.1.5.2.2 | NodevoiceGroupBE01A | |||
| 1.3.6.1.4.1.562.2.4.2.49.3 | NodevoiceCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.49.3.5 | NodevoiceCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.49.3.5.2 | NodevoiceCapabilitiesBE01 | |||
| 1.3.6.1.4.1.562.2.4.2.49.3.5.2.2 | NodevoiceCapabilitiesBE01A |