Nortel-Magellan-Passport-X25DteMIB
323 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.90 | Nodex25Dte | |||
| 1.3.6.1.4.1.562.2.4.1.90.1 | Tablex25DteRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of x25Dte components. |
| 1.3.6.1.4.1.562.2.4.1.90.1.1 | Rowx25DteRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single x25Dte component. |
| 1.3.6.1.4.1.562.2.4.1.90.1.1.1 | Columnx25DteRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of x25Dte components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.90.1.1.2 | Columnx25DteComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.90.1.1.4 | Columnx25DteStorageType | read-only | mandatory | This variable represents the storage type value for the x25Dte tables. |
| 1.3.6.1.4.1.562.2.4.1.90.1.1.10 | Columnx25DteIndex | not-accessible | mandatory | This variable represents the index for the x25Dte tables. |
| 1.3.6.1.4.1.562.2.4.1.90.2 | Nodex25DtePeer | |||
| 1.3.6.1.4.1.562.2.4.1.90.2.1 | Tablex25DtePeerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of x25DtePeer components. |
| 1.3.6.1.4.1.562.2.4.1.90.2.1.1 | Rowx25DtePeerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single x25DtePeer component. |
| 1.3.6.1.4.1.562.2.4.1.90.2.1.1.1 | Columnx25DtePeerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of x25DtePeer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.90.2.1.1.2 | Columnx25DtePeerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.90.2.1.1.4 | Columnx25DtePeerStorageType | read-only | mandatory | This variable represents the storage type value for the x25DtePeer tables. |
| 1.3.6.1.4.1.562.2.4.1.90.2.1.1.10 | Columnx25DtePeerIndex | not-accessible | mandatory | This variable represents the index for the x25DtePeer tables. |
| 1.3.6.1.4.1.562.2.4.1.90.2.10 | Tablex25DtePeerIfTable | not-accessible | mandatory | This group provides the administrative set of parameters for the Peer interface. |
| 1.3.6.1.4.1.562.2.4.1.90.2.10.1 | Rowx25DtePeerIfEntry | not-accessible | mandatory | An entry in the x25DtePeerIfTable. |
| 1.3.6.1.4.1.562.2.4.1.90.2.10.1.1 | Columnx25DtePeerEncAddressType | read-write | mandatory | This attribute specifies the encapsulation type for the address of the remote host with which this Peer component allows communication. |
| 1.3.6.1.4.1.562.2.4.1.90.2.10.1.2 | Columnx25DtePeerEncAddress | read-write | mandatory | This attribute specifies the encapsulation address of the remote host with which this Peer component allows communication. This address must correspond with th… |
| 1.3.6.1.4.1.562.2.4.1.90.2.10.1.3 | Columnx25DtePeerX25Address | read-write | mandatory | This attribute specifies the X.25 address that identifies the remote host with which this Peer component allows communication. The remote X.25 interface could … |
| 1.3.6.1.4.1.562.2.4.1.90.2.10.1.4 | Columnx25DtePeerLinkToRemoteGroup | read-write | mandatory | This is a link to a RemoteGroup component. The RemoteGroup components logically divide up the X.25 Interface such that a number of Protocol Ports (and conseque… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12 | Tablex25DtePeerCpTable | not-accessible | mandatory | This group contains the call parameters used to establish a call to/ from the remote host identified by this Peer component |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1 | Rowx25DtePeerCpEntry | not-accessible | mandatory | An entry in the x25DtePeerCpTable. |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.1 | Columnx25DtePeerInPacketSize | read-write | mandatory | This attribute specifies the default maximum receive packet size in octets. A setting of 0 indicates the inPacketSize setting for the X.25 interface (in X25Dte… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.2 | Columnx25DtePeerOutPacketSize | read-write | mandatory | This attribute specifies the default maximum transmit packet size in octets. A setting of 0 indicates the outPacketSize setting for the X.25 interface (in the … |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.3 | Columnx25DtePeerInWindowSize | read-write | mandatory | This attribute specifies the default receive window size. A window size of 0 indicates the inWindowSize setting for the X.25 interface (in the X25Dte component… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.4 | Columnx25DtePeerOutWindowSize | read-write | mandatory | This attribute specifies the default transmit window size. A window size of 0 indicates the outWindowSize setting for the X.25 interface is used during call se… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.5 | Columnx25DtePeerAcceptReverseCharging | read-write | mandatory | This attribute specifies whether the local end will accept or refuse charges for a call from the remote host identified by this Peer component. A value of defa… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.6 | Columnx25DtePeerProposeReverseCharging | read-write | mandatory | This attribute specifies whether local/reverse charging is signalled in a call request packet. A value of default indicates the use of the value from the propo… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.8 | Columnx25DtePeerOutThroughputClassSize | read-write | mandatory | This attribute specifies the value of the transmit throughput class to be negotiated. A value of default indicates the use of the value from the outThroughputC… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.9 | Columnx25DtePeerInThroughputClassSize | read-write | mandatory | This attribute specifies the value of the receive throughput class to be negotiated. A value of default indicates the use of the value from the inThroughputCla… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.10 | Columnx25DtePeerCugIndex | read-write | mandatory | This attribute specifies the index of the Closed User Group facility to signal. A value of 'DEF' indicates the use of the value from the cugIndex attribute of … |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.11 | Columnx25DtePeerCugoaIndex | read-write | mandatory | This attribute specifies the index of the Closed User Group with Outgoing Access facility to signal. A value of 'DEF' indicates the use of the value from the c… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.12 | Columnx25DtePeerNetworkUserIdentifier | read-write | mandatory | This attribute specifies the Network User Identifier facility to signal. A value of null (empty string) indicates no NUI facility is to be signalled. |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.13 | Columnx25DtePeerChargingInformation | read-write | mandatory | This attribute specifies whether the charging information facility is signalled in the call request packet. A value of default indicates the use of the value f… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.14 | Columnx25DtePeerRpoa | read-write | mandatory | This attribute specifies the RPOA facility to signal in a call request packet. A value of 'DEF' indicates the use of the value from the rpoa attribute of the X… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.15 | Columnx25DtePeerTrnstDlySlctnAInd | read-write | mandatory | This attribute specifies the value of the Transit Delay Selection and Indication facility to signal in a call request packet. A value of 65536 indicates no fac… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.24 | Columnx25DtePeerCallingNetworkFax | read-write | mandatory | This attribute specifies the Calling Network facilities to signal in a call request packet. The facilities are encoded here exactly as they are encoded in the … |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.25 | Columnx25DtePeerCalledNetworkFax | read-write | mandatory | This attribute specifies the Called Network facilities to signal in a call request packet. The facilities are encoded here exactly as they are encoded in the c… |
| 1.3.6.1.4.1.562.2.4.1.90.2.12.1.26 | Columnx25DtePeerCallUserData | read-only | mandatory | This attribute specifies the user data to signal in a call request packet. A value of null (empty string) indicates that the callUserData from the X25Dte is to… |
| 1.3.6.1.4.1.562.2.4.1.90.2.208 | Tablex25DtePeerPEncTable | not-accessible | mandatory | Each instance of this replicated attribute describes an encapsulation method permitted for encapsulating the protocol data units (PDUs) of an upper layer proto… |
| 1.3.6.1.4.1.562.2.4.1.90.2.208.1 | Rowx25DtePeerPEncEntry | not-accessible | mandatory | An entry in the x25DtePeerPEncTable. |
| 1.3.6.1.4.1.562.2.4.1.90.2.208.1.1 | Columnx25DtePeerPEncIndex | not-accessible | mandatory | This variable represents the index for the x25DtePeerPEncTable. |
| 1.3.6.1.4.1.562.2.4.1.90.2.208.1.2 | Columnx25DtePeerPEncValue | read-write | mandatory | This variable represents an individual value for the x25DtePeerPEncTable. |
| 1.3.6.1.4.1.562.2.4.1.90.2.208.1.3 | Columnx25DtePeerPEncRowStatus | write-only | mandatory | This variable is used to control the addition and deletion of individual values of the x25DtePeerPEncTable. |
| 1.3.6.1.4.1.562.2.4.1.90.2.209 | Tablex25DtePeerLcnTable | not-accessible | mandatory | This attribute specifies the local logical channel numbers (Lcn) in use for the X.25 calls to the remote host identified by this Peer component. |
| 1.3.6.1.4.1.562.2.4.1.90.2.209.1 | Rowx25DtePeerLcnEntry | not-accessible | mandatory | An entry in the x25DtePeerLcnTable. |
| 1.3.6.1.4.1.562.2.4.1.90.2.209.1.1 | Columnx25DtePeerLcnValue | read-only | mandatory | This variable represents both the value and the index for the x25DtePeerLcnTable. |
| 1.3.6.1.4.1.562.2.4.1.90.3 | Nodex25DtePLcn | |||
| 1.3.6.1.4.1.562.2.4.1.90.3.1 | Tablex25DtePLcnRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of x25DtePLcn components. |
| 1.3.6.1.4.1.562.2.4.1.90.3.1.1 | Rowx25DtePLcnRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single x25DtePLcn component. |
| 1.3.6.1.4.1.562.2.4.1.90.3.1.1.1 | Columnx25DtePLcnRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of x25DtePLcn components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.90.3.1.1.2 | Columnx25DtePLcnComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.90.3.1.1.4 | Columnx25DtePLcnStorageType | read-only | mandatory | This variable represents the storage type value for the x25DtePLcn tables. |
| 1.3.6.1.4.1.562.2.4.1.90.3.1.1.10 | Columnx25DtePLcnIndex | not-accessible | mandatory | This variable represents the index for the x25DtePLcn tables. |
| 1.3.6.1.4.1.562.2.4.1.90.3.10 | Tablex25DtePLcnProvTable | not-accessible | mandatory | This group contains the provisionable parameters for the permanent logical channels (PLcns) on the X.25 interface (corresponding to Permanent Virtual Circuits … |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1 | Rowx25DtePLcnProvEntry | not-accessible | mandatory | An entry in the x25DtePLcnProvTable. |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1.1 | Columnx25DtePLcnEncAddressType | read-write | mandatory | This attribute specifies the encapsulation type for the address of the remote host with which this Peer component allows communication. |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1.2 | Columnx25DtePLcnEncAddress | read-write | mandatory | This attribute specifies the encapsulation address of the remote host with which this PermLcn component defines a connection |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1.3 | Columnx25DtePLcnProtocolEncType | read-write | mandatory | This attribute specifies the encapsulation method to use when exchanging protocol data units (PDUs) over this channel. IP and Null protocolEncTypes are as defi… |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1.4 | Columnx25DtePLcnLinkToRemoteGroup | read-write | mandatory | This attribute specifies the link to the RemoteGroup, indicating the RemoteGroup component with which this PermLcn component is associated. The RemoteGroup com… |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1.5 | Columnx25DtePLcnInPacketSize | read-write | mandatory | This attribute specifies the maximum receive packet size in octets. |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1.6 | Columnx25DtePLcnOutPacketSize | read-write | mandatory | This attribute specifies the maximum transmit packet size in octets. |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1.7 | Columnx25DtePLcnInWindowSize | read-write | mandatory | This attribute specifies the maximum receive window size. A inWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte compone… |
| 1.3.6.1.4.1.562.2.4.1.90.3.10.1.8 | Columnx25DtePLcnOutWindowSize | read-write | mandatory | This attribute specifies the maximum transmit window size. A outWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte compo… |
| 1.3.6.1.4.1.562.2.4.1.90.4 | Nodex25DteLcn | |||
| 1.3.6.1.4.1.562.2.4.1.90.4.1 | Tablex25DteLcnRowStatusTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of x25DteLcn components. |
| 1.3.6.1.4.1.562.2.4.1.90.4.1.1 | Rowx25DteLcnRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single x25DteLcn component. |
| 1.3.6.1.4.1.562.2.4.1.90.4.1.1.1 | Columnx25DteLcnRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of x25DteLcn components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.90.4.1.1.2 | Columnx25DteLcnComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.90.4.1.1.4 | Columnx25DteLcnStorageType | read-only | mandatory | This variable represents the storage type value for the x25DteLcn tables. |
| 1.3.6.1.4.1.562.2.4.1.90.4.1.1.10 | Columnx25DteLcnIndex | not-accessible | mandatory | This variable represents the index for the x25DteLcn tables. |
| 1.3.6.1.4.1.562.2.4.1.90.4.10 | Tablex25DteLcnStateTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribut… |
| 1.3.6.1.4.1.562.2.4.1.90.4.10.1 | Rowx25DteLcnStateEntry | not-accessible | mandatory | An entry in the x25DteLcnStateTable. |
| 1.3.6.1.4.1.562.2.4.1.90.4.10.1.1 | Columnx25DteLcnAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.90.4.10.1.2 | Columnx25DteLcnOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.90.4.10.1.3 | Columnx25DteLcnUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.90.4.11 | Tablex25DteLcnCpTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the call parameters that are in use for this logical channel. For a PVC only the packet size a… |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1 | Rowx25DteLcnCpEntry | not-accessible | mandatory | An entry in the x25DteLcnCpTable. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.1 | Columnx25DteLcnInPacketSize | read-only | mandatory | This attribute indicates the maximum receive packet size in octets. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.2 | Columnx25DteLcnOutPacketSize | read-only | mandatory | This attribute indicates the maximum transmit packet size in octets. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.3 | Columnx25DteLcnInWindowSize | read-only | mandatory | This attribute indicates the receive window size. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.4 | Columnx25DteLcnOutWindowSize | read-only | mandatory | This attribute indicates the transmit window size. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.5 | Columnx25DteLcnProposeReverseCharging | read-only | mandatory | Specifies whether local/reverse charging was negotiated for this logical channel. To determine which end of the channel is paying for the call, this attribute … |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.6 | Columnx25DteLcnFastSelect | read-only | mandatory | This attribute indicates whether the fast select was used in establishing this logical channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.7 | Columnx25DteLcnOutThroughputClassSize | read-only | mandatory | This attribute specifies the transmit throughput class. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.8 | Columnx25DteLcnInThroughputClassSize | read-only | mandatory | This attribute specifies the receive throughput class. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.9 | Columnx25DteLcnCugIndex | read-only | mandatory | This attribute indicates the index of the Closed User Group facility used in establishing this logical channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.10 | Columnx25DteLcnCugoaIndex | read-only | mandatory | This attribute indicates the index of the Closed User Group with Outgoing Access facility used in establishing this logical channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.11 | Columnx25DteLcnNetworkUserIdentifier | read-only | mandatory | Specifies the Network User Identifier used for this logical channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.12 | Columnx25DteLcnChargingInformation | read-only | mandatory | This attribute indicates whether or not the charging information facility was used in establishing this logical channel. A value of notSpecified means the faci… |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.13 | Columnx25DteLcnRpoa | read-only | mandatory | This attribute indicates the RPOA facility which was signalled in establishing this logical channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.14 | Columnx25DteLcnTrnstDlySlctnAInd | read-only | mandatory | This attribute indicates the Transit Delay Selection and Indication value used for this logical channel. A value of 65536 means no facility was signalled. |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.23 | Columnx25DteLcnCallingNetworkFax | read-only | mandatory | This attribute indicates the Calling Network facilities which were signalled in the call packet. A value of null (empty string) means no calling network facili… |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.24 | Columnx25DteLcnCalledNetworkFax | read-only | mandatory | This attribute indicates the called network facilities which were signalled in the call packet. A value of null (empty string) means no called network faciliti… |
| 1.3.6.1.4.1.562.2.4.1.90.4.11.1.25 | Columnx25DteLcnCallUserData | read-only | mandatory | This attribute indicates the user data which was signalled in the call packet. A value of null (empty string) means no user data was signalled. |
| 1.3.6.1.4.1.562.2.4.1.90.4.12 | Tablex25DteLcnLcnStatusTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the status for an X.25 Logical Channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.12.1 | Rowx25DteLcnLcnStatusEntry | not-accessible | mandatory | An entry in the x25DteLcnLcnStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.90.4.12.1.1 | Columnx25DteLcnStatus | read-only | mandatory | This attribute indicates the current state of the logical channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.12.1.3 | Columnx25DteLcnCallDirection | read-only | mandatory | This attribute indicates the direction of the call that caused the establishment of this channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.12.1.4 | Columnx25DteLcnCalledAddress | read-only | mandatory | This attribute indicates the called X.25 address to which the call is established. |
| 1.3.6.1.4.1.562.2.4.1.90.4.12.1.5 | Columnx25DteLcnCallingAddress | read-only | mandatory | This attribute indicates the calling X.25 address from which the call originated |
| 1.3.6.1.4.1.562.2.4.1.90.4.12.1.6 | Columnx25DteLcnOriginalCalledAddress | read-only | mandatory | This attribute indicates the X.25 address of the originally called DTE to which the call was attempted. This could be different from the value of the calledAdd… |
| 1.3.6.1.4.1.562.2.4.1.90.4.13 | Tablex25DteLcnStatsTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics for an X.25 Logical Channel. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1 | Rowx25DteLcnStatsEntry | not-accessible | mandatory | An entry in the x25DteLcnStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.1 | Columnx25DteLcnInUknownProtocols | read-only | mandatory | This attribute counts the number packets received from link which were discareded because of an unkown or unsupported protocols. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.2 | Columnx25DteLcnInDataOctets | read-only | mandatory | This attribute counts the number of octets of user data received from the link. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.3 | Columnx25DteLcnInDataPackets | read-only | mandatory | This attribute counts the number of data packets received from the link. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.4 | Columnx25DteLcnInRmtInitiatedRsts | read-only | mandatory | This attribute counts the number of reset packets, with a cause code of 'DTE initiated', which were received from the link |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.5 | Columnx25DteLcnInPrvdrInitiatedRsts | read-only | mandatory | This attribute counts the number of reset packets, with a cause code other than 'DTE initiated', which were received from the link. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.6 | Columnx25DteLcnInInterruptPackets | read-only | mandatory | This attribute counts the number of interrupt packets received from the link. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.7 | Columnx25DteLcnOutDataOctets | read-only | mandatory | This attribute counts the number of octets of user data sent to the link. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.8 | Columnx25DteLcnOutDataPackets | read-only | mandatory | This attribute counts the number of data packets sent to link. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.9 | Columnx25DteLcnOutInterruptPackets | read-only | mandatory | This attribute counts the number of interrupt packets sent to link. |
| 1.3.6.1.4.1.562.2.4.1.90.4.13.1.10 | Columnx25DteLcnT22ResetTimeouts | read-only | mandatory | This attribute counts the number of times the t22 reset timer has expired. |
| 1.3.6.1.4.1.562.2.4.1.90.5 | Nodex25DteLapb | |||
| 1.3.6.1.4.1.562.2.4.1.90.5.1 | Tablex25DteLapbRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of x25DteLapb components. |
| 1.3.6.1.4.1.562.2.4.1.90.5.1.1 | Rowx25DteLapbRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single x25DteLapb component. |
| 1.3.6.1.4.1.562.2.4.1.90.5.1.1.1 | Columnx25DteLapbRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of x25DteLapb components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.90.5.1.1.2 | Columnx25DteLapbComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.90.5.1.1.4 | Columnx25DteLapbStorageType | read-only | mandatory | This variable represents the storage type value for the x25DteLapb tables. |
| 1.3.6.1.4.1.562.2.4.1.90.5.1.1.10 | Columnx25DteLapbIndex | not-accessible | mandatory | This variable represents the index for the x25DteLapb tables. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2 | Nodex25DteLapbFramer | |||
| 1.3.6.1.4.1.562.2.4.1.90.5.2.1 | Tablex25DteLapbFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of x25DteLapbFramer components. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1 | Rowx25DteLapbFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single x25DteLapbFramer component. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.1 | Columnx25DteLapbFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of x25DteLapbFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.2 | Columnx25DteLapbFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.4 | Columnx25DteLapbFramerStorageType | read-only | mandatory | This variable represents the storage type value for the x25DteLapbFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.10 | Columnx25DteLapbFramerIndex | not-accessible | mandatory | This variable represents the index for the x25DteLapbFramer tables. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.10 | Tablex25DteLapbFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.10.1 | Rowx25DteLapbFramerProvEntry | not-accessible | mandatory | An entry in the x25DteLapbFramerProvTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.10.1.1 | Columnx25DteLapbFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.11 | Tablex25DteLapbFramerLinkTable | not-accessible | mandatory | This group contains attributes defining the framing of data on the link interface. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.11.1 | Rowx25DteLapbFramerLinkEntry | not-accessible | mandatory | An entry in the x25DteLapbFramerLinkTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.11.1.4 | Columnx25DteLapbFramerFlagsBetweenFrames | read-write | mandatory | This attribute defines the number of flags that are inserted between frames sent to the link interface. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.12 | Tablex25DteLapbFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.12.1 | Rowx25DteLapbFramerStateEntry | not-accessible | mandatory | An entry in the x25DteLapbFramerStateTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.1 | Columnx25DteLapbFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.2 | Columnx25DteLapbFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.3 | Columnx25DteLapbFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13 | Tablex25DteLapbFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1 | Rowx25DteLapbFramerStatsEntry | not-accessible | mandatory | An entry in the x25DteLapbFramerStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.1 | Columnx25DteLapbFramerFrmToIf | read-only | mandatory | The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, … |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.2 | Columnx25DteLapbFramerFrmFromIf | read-only | mandatory | The number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.3 | Columnx25DteLapbFramerOctetFromIf | read-only | mandatory | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.4 | Columnx25DteLapbFramerAborts | read-only | mandatory | This attribute is the total number of aborts received. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.5 | Columnx25DteLapbFramerCrcErrors | read-only | mandatory | This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.6 | Columnx25DteLapbFramerLrcErrors | read-only | mandatory | This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.7 | Columnx25DteLapbFramerNonOctetErrors | read-only | mandatory | This attribute is the total number of frames that were non octet aligned. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.8 | Columnx25DteLapbFramerOverruns | read-only | mandatory | This attribute is the total number of frames received from the link for which overruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.9 | Columnx25DteLapbFramerUnderruns | read-only | mandatory | This attribute is the total number of frames transmitted to the link for which underruns occurred. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.14 | Tablex25DteLapbFramerUtilTable | not-accessible | mandatory | This group contains the link utilizaiton operational data for a Framer component. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.14.1 | Rowx25DteLapbFramerUtilEntry | not-accessible | mandatory | An entry in the x25DteLapbFramerUtilTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.14.1.1 | Columnx25DteLapbFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwi… |
| 1.3.6.1.4.1.562.2.4.1.90.5.2.14.1.3 | Columnx25DteLapbFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available … |
| 1.3.6.1.4.1.562.2.4.1.90.5.10 | Tablex25DteLapbCpTable | not-accessible | mandatory | X25Dte/n Lapb This group contains the set of configuration parameters for the LAPB interface. |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1 | Rowx25DteLapbCpEntry | not-accessible | mandatory | An entry in the x25DteLapbCpTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.1 | Columnx25DteLapbStationType | read-write | mandatory | This attribute specifies the DCE or the DTE role of operation for the LAPB interface. Changing this attribute will cause the lapb link to Reset. |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.2 | Columnx25DteLapbFrameSequencing | read-write | mandatory | This attribute specifies the modulo of the frame sequence numbering of the LAPB interface. Changing this attribute will cause the lapb link to Reset. |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.3 | Columnx25DteLapbN1FrameSize | read-write | mandatory | |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.4 | Columnx25DteLapbKWindowSize | read-write | mandatory | This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at an… |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.5 | Columnx25DteLapbN2TransmitLimit | read-write | mandatory | This attribute specifies the maximum number of times a frame can be transmitted before appropriate recovery action is taken. |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.6 | Columnx25DteLapbT1AckTimer | read-write | mandatory | This attribute specifies the period in milliseconds within which an acknowledgment of a sent frame must be received. The value set for t1 ack timer must be les… |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.7 | Columnx25DteLapbT2AckDelayTimer | read-write | mandatory | This attribute specifies the maximum period in milliseconds permissible to wait before sending an acknowledgment for a received in sequenced I-frame. A value o… |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.8 | Columnx25DteLapbT4IdleProbeTimer | read-write | mandatory | This attribute specifies the time period in milliseconds the link will be permitted to remain idle (that is, no frames are exchanged on the data link). Upon ex… |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.9 | Columnx25DteLapbActionInitiate | read-write | mandatory | This attribute specifies the action to be taken by the LAPB interface to initiate link setup. |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.10 | Columnx25DteLapbActionRecvDM | read-write | mandatory | This attribute specifies the action to be taken by the LAPB interface when it receives a DM response. |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.11 | Columnx25DteLapbTxQDegradeThreshold | read-write | mandatory | This attribute specifies the threshold of the number of higher layer packets queued, beyond which LAPB should initiate a service degrade alarm. A value of 6553… |
| 1.3.6.1.4.1.562.2.4.1.90.5.10.1.12 | Columnx25DteLapbTxQResetThreshold | read-write | mandatory | This attribute specifies the threshold of the number of higher layer packets queued, beyond which LAPB should initiate an overload alarm and reset the link. A … |
| 1.3.6.1.4.1.562.2.4.1.90.5.11 | Tablex25DteLapbStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.90.5.11.1 | Rowx25DteLapbStateEntry | not-accessible | mandatory | An entry in the x25DteLapbStateTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.11.1.1 | Columnx25DteLapbAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.90.5.11.1.2 | Columnx25DteLapbOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.90.5.11.1.3 | Columnx25DteLapbUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.90.5.12 | Tablex25DteLapbStatusTable | not-accessible | mandatory | This group contains the status for the LAPB interface. |
| 1.3.6.1.4.1.562.2.4.1.90.5.12.1 | Rowx25DteLapbStatusEntry | not-accessible | mandatory | An entry in the x25DteLapbStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.12.1.1 | Columnx25DteLapbCurrentState | read-only | mandatory | This attribute specifies the current state of the LAPB interface. |
| 1.3.6.1.4.1.562.2.4.1.90.5.12.1.2 | Columnx25DteLapbLastStateChangeReason | read-only | mandatory | This attribute specifies the reason for the most recent state change. |
| 1.3.6.1.4.1.562.2.4.1.90.5.12.1.3 | Columnx25DteLapbFrmrTransmit | read-only | mandatory | This attribute specifies the Information field of the FRMR most recently sent. |
| 1.3.6.1.4.1.562.2.4.1.90.5.12.1.4 | Columnx25DteLapbFrmrReceive | read-only | mandatory | This attribute specifies the Information field of the FRMR most recently received. |
| 1.3.6.1.4.1.562.2.4.1.90.5.12.1.5 | Columnx25DteLapbCurrentQueueSize | read-only | mandatory | This attribute specifies the number of packets on the lapb transmit queue. |
| 1.3.6.1.4.1.562.2.4.1.90.5.13 | Tablex25DteLapbStatsTable | not-accessible | mandatory | This group contains the statistics for the LAPB interface. |
| 1.3.6.1.4.1.562.2.4.1.90.5.13.1 | Rowx25DteLapbStatsEntry | not-accessible | mandatory | An entry in the x25DteLapbStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.90.5.13.1.1 | Columnx25DteLapbStateChanges | read-only | mandatory | This attribute counts the number of times LAPB state has changed. Refer to the attribute 'linkState' for the set of possible states. |
| 1.3.6.1.4.1.562.2.4.1.90.5.13.1.2 | Columnx25DteLapbRemoteBusy | read-only | mandatory | This attribute counts the number of times transmission of an I-frame was un-successful due to a perceived remote busy condition (window closed or remote busy). |
| 1.3.6.1.4.1.562.2.4.1.90.5.13.1.3 | Columnx25DteLapbTransmitRejectFrames | read-only | mandatory | This attribute counts the number of REJ frames sent by the interface. |
| 1.3.6.1.4.1.562.2.4.1.90.5.13.1.4 | Columnx25DteLapbReceiveRejectFrames | read-only | mandatory | This attribute counts the number of REJ frames received by the interface. |
| 1.3.6.1.4.1.562.2.4.1.90.5.13.1.5 | Columnx25DteLapbT1AckTimeout | read-only | mandatory | This attribute counts the number of times the T1 timer has expired. |
| 1.3.6.1.4.1.562.2.4.1.90.6 | Nodex25DtePle | |||
| 1.3.6.1.4.1.562.2.4.1.90.6.1 | Tablex25DtePleRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of x25DtePle components. |
| 1.3.6.1.4.1.562.2.4.1.90.6.1.1 | Rowx25DtePleRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single x25DtePle component. |
| 1.3.6.1.4.1.562.2.4.1.90.6.1.1.1 | Columnx25DtePleRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of x25DtePle components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.90.6.1.1.2 | Columnx25DtePleComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.90.6.1.1.4 | Columnx25DtePleStorageType | read-only | mandatory | This variable represents the storage type value for the x25DtePle tables. |
| 1.3.6.1.4.1.562.2.4.1.90.6.1.1.10 | Columnx25DtePleIndex | not-accessible | mandatory | This variable represents the index for the x25DtePle tables. |
| 1.3.6.1.4.1.562.2.4.1.90.6.10 | Tablex25DtePleProvTable | not-accessible | mandatory | This group contains the provisionable attributes relevant to an interface used to carry Multiprotocol Interconnect traffic over X.25. |
| 1.3.6.1.4.1.562.2.4.1.90.6.10.1 | Rowx25DtePleProvEntry | not-accessible | mandatory | An entry in the x25DtePleProvTable. |
| 1.3.6.1.4.1.562.2.4.1.90.6.10.1.1 | Columnx25DtePleInactivityTimer | read-write | mandatory | This attribute specifies the period in milliseconds this interface will keep an idle connection open before closing it. |
| 1.3.6.1.4.1.562.2.4.1.90.6.11 | Tablex25DtePleOpTable | not-accessible | mandatory | This group contains the Operational attributes relevant to an interface used to carry Multiprotocol Interconnect traffic over X.25. |
| 1.3.6.1.4.1.562.2.4.1.90.6.11.1 | Rowx25DtePleOpEntry | not-accessible | mandatory | An entry in the x25DtePleOpTable. |
| 1.3.6.1.4.1.562.2.4.1.90.6.11.1.1 | Columnx25DtePleEncAddrToX25LkupFlrs | read-only | mandatory | This attribute indicates the number of times a translation attempt from an Encapsulation address to an X.25 address failed to find a corresponding X.25 address… |
| 1.3.6.1.4.1.562.2.4.1.90.6.11.1.2 | Columnx25DtePleLastFailedEncAddr | read-only | mandatory | This attribute indicates the last Encapsulation address for which no corresponding X.25 address was found and thus caused encAddressToX25LkupFlrs to be increme… |
| 1.3.6.1.4.1.562.2.4.1.90.6.11.1.4 | Columnx25DtePleX25AddrToEncLkupFlrs | read-only | mandatory | This attribute indicates the number of times a translation attempt from an X.25 address to an Encapsulation address failed to find a corresponding Encapsulatio… |
| 1.3.6.1.4.1.562.2.4.1.90.6.11.1.5 | Columnx25DtePleLastFailedX25Addr | read-only | mandatory | This field specifies the last X.25 address that caused x25AddressToEncLkupFlrs to be incremented. |
| 1.3.6.1.4.1.562.2.4.1.90.7 | Nodex25DteRg | |||
| 1.3.6.1.4.1.562.2.4.1.90.7.1 | Tablex25DteRgRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of x25DteRg components. |
| 1.3.6.1.4.1.562.2.4.1.90.7.1.1 | Rowx25DteRgRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single x25DteRg component. |
| 1.3.6.1.4.1.562.2.4.1.90.7.1.1.1 | Columnx25DteRgRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of x25DteRg components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.90.7.1.1.2 | Columnx25DteRgComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.90.7.1.1.4 | Columnx25DteRgStorageType | read-only | mandatory | This variable represents the storage type value for the x25DteRg tables. |
| 1.3.6.1.4.1.562.2.4.1.90.7.1.1.10 | Columnx25DteRgIndex | not-accessible | mandatory | This variable represents the index for the x25DteRg tables. |
| 1.3.6.1.4.1.562.2.4.1.90.7.10 | Tablex25DteRgIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.90.7.10.1 | Rowx25DteRgIfEntryEntry | not-accessible | mandatory | An entry in the x25DteRgIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.10.1.1 | Columnx25DteRgIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.90.7.10.1.2 | Columnx25DteRgIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.90.7.11 | Tablex25DteRgProvTable | not-accessible | mandatory | This group contains the provisionable attributes of the RemoteGroup component. |
| 1.3.6.1.4.1.562.2.4.1.90.7.11.1 | Rowx25DteRgProvEntry | not-accessible | mandatory | An entry in the x25DteRgProvTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.11.1.1 | Columnx25DteRgLinkToProtocolPort | read-write | mandatory | This attribute contains a protocol port component name. The attribute associates the application with a protocol port. |
| 1.3.6.1.4.1.562.2.4.1.90.7.11.1.2 | Columnx25DteRgLocalAddress | read-write | mandatory | This attribute contains the unique X.25 address which identifies this RemoteGroup. It should correspond to the called address in X.25 incoming call packets whi… |
| 1.3.6.1.4.1.562.2.4.1.90.7.11.1.3 | Columnx25DteRgMtuSize | read-write | mandatory | This attribute specifies the Maximum Transmit Unit (MTU); that is, the size of the largest datagram (in octets) which can be sent/ received on the interface. |
| 1.3.6.1.4.1.562.2.4.1.90.7.12 | Tablex25DteRgStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.90.7.12.1 | Rowx25DteRgStateEntry | not-accessible | mandatory | An entry in the x25DteRgStateTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.12.1.1 | Columnx25DteRgAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.90.7.12.1.2 | Columnx25DteRgOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.90.7.12.1.3 | Columnx25DteRgUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.90.7.13 | Tablex25DteRgOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.90.7.13.1 | Rowx25DteRgOperStatusEntry | not-accessible | mandatory | An entry in the x25DteRgOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.13.1.1 | Columnx25DteRgSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.90.7.210 | Tablex25DteRgLTPlcnTable | not-accessible | mandatory | This attribute is a list of links to PermLcn components. The set of all Peer and PermLcn components which link to a given RemoteGroup determine the subset of r… |
| 1.3.6.1.4.1.562.2.4.1.90.7.210.1 | Rowx25DteRgLTPlcnEntry | not-accessible | mandatory | An entry in the x25DteRgLTPlcnTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.210.1.1 | Columnx25DteRgLTPlcnValue | read-write | mandatory | This variable represents both the value and the index for the x25DteRgLTPlcnTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.210.1.2 | Columnx25DteRgLTPlcnRowStatus | write-only | mandatory | This variable is used to control the addition and deletion of individual values of the x25DteRgLTPlcnTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.211 | Tablex25DteRgLtPeerTable | not-accessible | mandatory | This attribute gives a list of links to Peer components. The set of all Peer and PermLcn components which link to a given RemoteGroup determine the subset of r… |
| 1.3.6.1.4.1.562.2.4.1.90.7.211.1 | Rowx25DteRgLtPeerEntry | not-accessible | mandatory | An entry in the x25DteRgLtPeerTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.211.1.1 | Columnx25DteRgLtPeerValue | read-write | mandatory | This variable represents both the value and the index for the x25DteRgLtPeerTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.211.1.2 | Columnx25DteRgLtPeerRowStatus | write-only | mandatory | This variable is used to control the addition and deletion of individual values of the x25DteRgLtPeerTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.212 | Tablex25DteRgLcnTable | not-accessible | mandatory | This attribute lists the Lcn components for the X25Dte, which belong to this RemoteGroup. There is an Lcn component listed here for every lcn connection belong… |
| 1.3.6.1.4.1.562.2.4.1.90.7.212.1 | Rowx25DteRgLcnEntry | not-accessible | mandatory | An entry in the x25DteRgLcnTable. |
| 1.3.6.1.4.1.562.2.4.1.90.7.212.1.1 | Columnx25DteRgLcnValue | read-only | mandatory | This variable represents both the value and the index for the x25DteRgLcnTable. |
| 1.3.6.1.4.1.562.2.4.1.90.20 | Tablex25DteCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.90.20.1 | Rowx25DteCidDataEntry | not-accessible | mandatory | An entry in the x25DteCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.90.20.1.1 | Columnx25DteCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.90.21 | Tablex25DteIfTable | not-accessible | mandatory | This group provides the administrative set of parameters for the X.25 interface. |
| 1.3.6.1.4.1.562.2.4.1.90.21.1 | Rowx25DteIfEntry | not-accessible | mandatory | An entry in the x25DteIfTable. |
| 1.3.6.1.4.1.562.2.4.1.90.21.1.1 | Columnx25DteInterfaceMode | read-only | mandatory | This attribute specifies the packet mode in which the X.25 interface operates. When this attribute is set to dte, interface on the other side of the physical l… |
| 1.3.6.1.4.1.562.2.4.1.90.21.1.2 | Columnx25DteMaxActiveChannels | read-write | mandatory | This attribute specifies the maximum number of channels that can be active on this interface including the Permanent Lcns and the Switched Lcns. In total maxAc… |
| 1.3.6.1.4.1.562.2.4.1.90.21.1.3 | Columnx25DteNumberOfPLcn | read-write | mandatory | This attribute specifies the number of Permanent Logical Channels that are supported on this X.25 interface (that is, the number of PermLcn components that may… |
| 1.3.6.1.4.1.562.2.4.1.90.21.1.4 | Columnx25DtePacketSequencing | read-write | mandatory | This attribute specifies the sequence numbering of packets for the X.25 interface. The value of this attribute must be the same as the packet sequencing config… |
| 1.3.6.1.4.1.562.2.4.1.90.21.1.5 | Columnx25DteT20RestartTimer | read-write | mandatory | This attribute provides the period in milliseconds within which a restart request packet should be confirmed. |
| 1.3.6.1.4.1.562.2.4.1.90.21.1.6 | Columnx25DteT21CallTimer | read-write | mandatory | This attribute provides the period in milliseconds within which a call request packet should be confirmed. |
| 1.3.6.1.4.1.562.2.4.1.90.21.1.7 | Columnx25DteT22ResetTimer | read-write | mandatory | This attribute provides the period in milliseconds within which a reset request packet should be confirmed. |
| 1.3.6.1.4.1.562.2.4.1.90.21.1.8 | Columnx25DteT23ClearTimer | read-write | mandatory | This attribute provides the period in milliseconds within which a clear request packet should be confirmed. |
| 1.3.6.1.4.1.562.2.4.1.90.22 | Tablex25DteLcnCTable | not-accessible | mandatory | This group contains the provisionable attributes for the Logical Channel configuration of the X.25 Interface. The logical channel range table is ordered as fol… |
| 1.3.6.1.4.1.562.2.4.1.90.22.1 | Rowx25DteLcnCEntry | not-accessible | mandatory | An entry in the x25DteLcnCTable. |
| 1.3.6.1.4.1.562.2.4.1.90.22.1.1 | Columnx25DteLowestILChannelNumber | read-write | mandatory | This attribute specifies the lowest Lcn number of the One-way Incoming Channel range for this X.25 interface. The value for this attribute must be greater than… |
| 1.3.6.1.4.1.562.2.4.1.90.22.1.2 | Columnx25DteHighestILChannelNumber | read-write | mandatory | This attribute specifies the highest Lcn number of the One-way Incoming Channel range for this X.25 interface. A value of 0 indicates that there are no channel… |
| 1.3.6.1.4.1.562.2.4.1.90.22.1.3 | Columnx25DteLowestTLChannelNumber | read-write | mandatory | This attribute specifies the lowest Lcn number of the Two-way Channel range for this X.25 interface. The value for this attribute must be greater than the high… |
| 1.3.6.1.4.1.562.2.4.1.90.22.1.4 | Columnx25DteHighestTLChannelNumber | read-write | mandatory | This attribute specifies the highest Lcn number of the Two-way Channel range for this X.25 interface. A value of 0 indicates that there are no channels in this… |
| 1.3.6.1.4.1.562.2.4.1.90.22.1.5 | Columnx25DteLowestOLChannelNumber | read-write | mandatory | This attribute specifies the lowest Lcn number of the One-way Outgoing Channel range for this X.25 interface. The value for this attribute must be greater than… |
| 1.3.6.1.4.1.562.2.4.1.90.22.1.6 | Columnx25DteHighestOLChannelNumber | read-write | mandatory | This attribute specifies the highest Lcn number of the One-way Outgoing Channel range for this X.25 interface. A value of 0 indicates that there are no channel… |
| 1.3.6.1.4.1.562.2.4.1.90.23 | Tablex25DteDcpTable | not-accessible | mandatory | This group contains the provisionable attributes giving the default call parameters used by all the logical channels during call setup. It is possible that dif… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1 | Rowx25DteDcpEntry | not-accessible | mandatory | An entry in the x25DteDcpTable. |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.1 | Columnx25DteInPacketSize | read-write | mandatory | This attribute specifies the maximum receive packet size in octets for the X.25 interface. |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.2 | Columnx25DteOutPacketSize | read-write | mandatory | This attribute specifies the maximum transmit packet size in octets for the X.25 interface. |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.3 | Columnx25DteInWindowSize | read-write | mandatory | This attribute specifies the maximum receive window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing attribute… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.4 | Columnx25DteOutWindowSize | read-write | mandatory | This attribute specifies the maximum transmit window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing is set t… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.5 | Columnx25DteAcceptReverseCharging | read-write | mandatory | This attribute specifies whether local end will accept or refuse charges for a call. A value of neverAccept is only used at the X.25 interface level and indica… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.6 | Columnx25DteProposeReverseCharging | read-write | mandatory | This attribute specifies whether local/reverse charging is signalled in the call request packet. |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.8 | Columnx25DteOutThroughputClassSize | read-write | mandatory | This attribute specifies the value of the transmit throughput class to be negotiated. A value of notSpecified means the facility is not signalled. |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.9 | Columnx25DteInThroughputClassSize | read-write | mandatory | This attribute specifies the value of the receive throughput class to be negotiated. A value of notSpecified means the facility is not signalled. |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.10 | Columnx25DteCugIndex | read-write | mandatory | This attribute specifies the index of the Closed User Group facility to signal. The index consists of two or four octets each representing a digit in the range… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.11 | Columnx25DteCugoaIndex | read-write | mandatory | This attribute specifies the index of the Close User Group with Outgoing Access facility to signal. The index consists of two or four octets each representing … |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.13 | Columnx25DteChargingInformation | read-write | mandatory | This attribute specifies whether the charging information facility is to be signalled in a call request packet. A value of notSpecified means the facility is n… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.14 | Columnx25DteRpoa | read-write | mandatory | This attribute specifies the value of the RPOA facility to signal in a call request packet. The value of null (empty string) at the X.25 interface means no RPO… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.15 | Columnx25DteTrnstDlySlctnAInd | read-write | mandatory | This attribute specifies the value of the Transit Delay Selection and Indication facility to signal in a call request packet. A value of 65536 at the X.25 inte… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.24 | Columnx25DteCallingNetworkFax | read-write | mandatory | This attribute specifies the Calling Network facilities to be signalled in a call request packet. A value of null (empty string) at the X.25 interface means no… |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.25 | Columnx25DteCalledNetworkFax | read-write | mandatory | This attribute specifies the called network facilities to be signalled in a call request packet. A value of null (empty string) at the X.25 interface means no … |
| 1.3.6.1.4.1.562.2.4.1.90.23.1.26 | Columnx25DteCallUserData | read-only | mandatory | This attribute specifies the user data to be signalled in the call request packet. A value of null (empty string) means no user data is signalled. |
| 1.3.6.1.4.1.562.2.4.1.90.24 | Tablex25DteIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.2.4.1.90.24.1 | Rowx25DteIfEntryEntry | not-accessible | mandatory | An entry in the x25DteIfEntryTable. |
| 1.3.6.1.4.1.562.2.4.1.90.24.1.1 | Columnx25DteIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.2.4.1.90.24.1.2 | Columnx25DteIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.2.4.1.90.25 | Tablex25DteStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.90.25.1 | Rowx25DteStateEntry | not-accessible | mandatory | An entry in the x25DteStateTable. |
| 1.3.6.1.4.1.562.2.4.1.90.25.1.1 | Columnx25DteAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.90.25.1.2 | Columnx25DteOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.90.25.1.3 | Columnx25DteUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.90.26 | Tablex25DteOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.2.4.1.90.26.1 | Rowx25DteOperStatusEntry | not-accessible | mandatory | An entry in the x25DteOperStatusTable. |
| 1.3.6.1.4.1.562.2.4.1.90.26.1.1 | Columnx25DteSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.2.4.1.90.27 | Tablex25DteOpTable | not-accessible | mandatory | This group contains the operational status of the X.25 interface. |
| 1.3.6.1.4.1.562.2.4.1.90.27.1 | Rowx25DteOpEntry | not-accessible | mandatory | An entry in the x25DteOpTable. |
| 1.3.6.1.4.1.562.2.4.1.90.27.1.1 | Columnx25DteInterfaceState | read-only | mandatory | This attribute specifies the state of the interface. The notReady state, is the initial state of the service, when it is being initialized. The localRestarting… |
| 1.3.6.1.4.1.562.2.4.1.90.28 | Tablex25DteStatsTable | not-accessible | mandatory | This component contains the statistics for the X.25 interface. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1 | Rowx25DteStatsEntry | not-accessible | mandatory | An entry in the x25DteStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.1 | Columnx25DteInCalls | read-only | mandatory | This attribute counts the number of call packets received from link. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.2 | Columnx25DteInCallRefusals | read-only | mandatory | This attribute counts the number of calls received from the link which have been cleared. This includes calls cleared by the X.25 interface and calls cleared b… |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.3 | Columnx25DteInPrvdrInitiatedClrs | read-only | mandatory | This attribute counts the number of clear packets received from the link with a cause code other than DTE initiated. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.4 | Columnx25DteInRmtInitiatedRsts | read-only | mandatory | This attribute counts the number of reset packets received from the link with the cause code DTE initiated. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.5 | Columnx25DteInPrvdrInitiatedRsts | read-only | mandatory | This attribute counts the number of reset packets received from the link with the cause code other than DTE initiated. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.6 | Columnx25DteInRestarts | read-only | mandatory | This attribute counts the number of restart packets received from the link while the service is in ready state. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.7 | Columnx25DteInDataPackets | read-only | mandatory | This attribute counts the number of data packets received from link. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.8 | Columnx25DteInPktsAcusdOfPrtclErr | read-only | mandatory | This attribute counts the number of clear, reset, restart and diagnostic packets received from link containing a procedure error cause code. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.9 | Columnx25DteInInterruptPackets | read-only | mandatory | This attributes counts the number of interrupt packets received from link. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.10 | Columnx25DteOutCallAttempts | read-only | mandatory | This attribute counts the number of call packets sent from this interface. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.11 | Columnx25DteOutCallFailures | read-only | mandatory | This attribute counts the number of call attempts from this interface that failed. This includes calls that were cleared because of restrictive fast select. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.12 | Columnx25DteOutInterruptPackets | read-only | mandatory | This attribute counts the number of interrupt packets sent to the link. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.13 | Columnx25DteOutDataPackets | read-only | mandatory | This attribute counts the number of data packets sent to the link. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.14 | Columnx25DteOutActiveChannels | read-only | mandatory | This attribute indicates the number of One-way Outgoing Channels that are currently in use. This counter includes the call requests that have not been accepted. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.15 | Columnx25DteInActiveChannels | read-only | mandatory | This attribute indicates number of One-way Incoming Channels that are currently active. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.16 | Columnx25DteTwowayActiveChannels | read-only | mandatory | This attribute indicates the number of Two-way Channels that are in use. This includes call requests sent but not yet accepted. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.17 | Columnx25DteT20RestartTimeouts | read-only | mandatory | This attribute counts the number of times the T20 restart timer has expired. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.18 | Columnx25DteT21CallTimeouts | read-only | mandatory | This attribute counts the number of times the T21 call timer has expired. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.19 | Columnx25DteT22ResetTimeouts | read-only | mandatory | This attribute counts the number of times the T22 reset timer has expired. |
| 1.3.6.1.4.1.562.2.4.1.90.28.1.20 | Columnx25DteT23ClearTimeouts | read-only | mandatory | This attribute counts the number of times the T23 clear timer has expired. |
| 1.3.6.1.4.1.562.2.4.2.48 | Nodex25DteMIB | |||
| 1.3.6.1.4.1.562.2.4.2.48.1 | Nodex25DteGroup | |||
| 1.3.6.1.4.1.562.2.4.2.48.1.5 | Nodex25DteGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.48.1.5.1 | Nodex25DteGroupBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.48.1.5.1.2 | Nodex25DteGroupBE00A | |||
| 1.3.6.1.4.1.562.2.4.2.48.3 | Nodex25DteCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.48.3.5 | Nodex25DteCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.48.3.5.1 | Nodex25DteCapabilitiesBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.48.3.5.1.2 | Nodex25DteCapabilitiesBE00A |