Nortel-MsCarrier-MscPassport-ApsMIB
87 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB | Counter32 DisplayString Integer32 RowStatus StorageType Unsigned32 |
| Nortel-MsCarrier-MscPassport-TextualConventionsMIB | AsciiString FixedPoint1 Hex Link NonReplicated PassportCounter64 |
| Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB | mscComponents mscPassportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.134 | NodemscAps | |||
| 1.3.6.1.4.1.562.36.2.1.134.1 | TablemscApsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscAps components. |
| 1.3.6.1.4.1.562.36.2.1.134.1.1 | RowmscApsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscAps component. |
| 1.3.6.1.4.1.562.36.2.1.134.1.1.1 | ColumnmscApsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscAps components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.134.1.1.2 | ColumnmscApsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.134.1.1.4 | ColumnmscApsStorageType | read-only | mandatory | This variable represents the storage type value for the mscAps tables. |
| 1.3.6.1.4.1.562.36.2.1.134.1.1.10 | ColumnmscApsIndex | not-accessible | mandatory | This variable represents the index for the mscAps tables. |
| 1.3.6.1.4.1.562.36.2.1.134.2 | NodemscApsTest | |||
| 1.3.6.1.4.1.562.36.2.1.134.2.1 | TablemscApsTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscApsTest components. |
| 1.3.6.1.4.1.562.36.2.1.134.2.1.1 | RowmscApsTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscApsTest component. |
| 1.3.6.1.4.1.562.36.2.1.134.2.1.1.1 | ColumnmscApsTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscApsTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.134.2.1.1.2 | ColumnmscApsTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.134.2.1.1.4 | ColumnmscApsTestStorageType | read-only | mandatory | This variable represents the storage type value for the mscApsTest tables. |
| 1.3.6.1.4.1.562.36.2.1.134.2.1.1.10 | ColumnmscApsTestIndex | not-accessible | mandatory | This variable represents the index for the mscApsTest tables. |
| 1.3.6.1.4.1.562.36.2.1.134.2.10 | TablemscApsTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.134.2.10.1 | RowmscApsTestStateEntry | not-accessible | mandatory | An entry in the mscApsTestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.134.2.10.1.1 | ColumnmscApsTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.134.2.10.1.2 | ColumnmscApsTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.134.2.10.1.3 | ColumnmscApsTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.134.2.11 | TablemscApsTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1 | RowmscApsTestSetupEntry | not-accessible | mandatory | An entry in the mscApsTestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1.1 | ColumnmscApsTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1.2 | ColumnmscApsTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1.3 | ColumnmscApsTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1.4 | ColumnmscApsTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1.5 | ColumnmscApsTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1.6 | ColumnmscApsTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1.7 | ColumnmscApsTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.134.2.11.1.8 | ColumnmscApsTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.134.2.12 | TablemscApsTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1 | RowmscApsTestResultsEntry | not-accessible | mandatory | An entry in the mscApsTestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.1 | ColumnmscApsTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.2 | ColumnmscApsTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.3 | ColumnmscApsTestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.4 | ColumnmscApsTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.5 | ColumnmscApsTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.6 | ColumnmscApsTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.7 | ColumnmscApsTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.8 | ColumnmscApsTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.9 | ColumnmscApsTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.10 | ColumnmscApsTestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.134.2.12.1.11 | ColumnmscApsTestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.134.10 | TablemscApsCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.134.10.1 | RowmscApsCidDataEntry | not-accessible | mandatory | An entry in the mscApsCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.134.10.1.1 | ColumnmscApsCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.134.11 | TablemscApsProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the Aps component. |
| 1.3.6.1.4.1.562.36.2.1.134.11.1 | RowmscApsProvEntry | not-accessible | mandatory | An entry in the mscApsProvTable. |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.1 | ColumnmscApsApplicationFramerName | read-write | mandatory | This attribute is a link to the service component which utilizes the protected Sonet or Sdh interface managed by the Aps component. |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.2 | ColumnmscApsWorkingLine | read-write | mandatory | This attribute is a link to the Path component whose parent Sonet or Sdh component provides the Aps' working line. A value must be defined for this component. … |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.3 | ColumnmscApsProtectionLine | read-write | mandatory | This attribute is a link to the Path component whose parent Sonet or Sdh component provides the Aps' protection line. A value must be defined for this componen… |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.4 | ColumnmscApsMode | read-write | mandatory | This attribute specifies the protection mode to use. It has possible values of unidirectional and bidirectional. The unidirectional mode allows the Aps to deci… |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.5 | ColumnmscApsRevertive | read-write | mandatory | This attribute specifies whether revertive switching is to be used. It has possible values of no or yes. When this attribute is no, the Aps will not revert the… |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.6 | ColumnmscApsHoldOffTime | read-write | mandatory | The hold off time is the delay between the detection of a Signal Fail or Signal Degrade on the active line and the initiation of a switchover. |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.7 | ColumnmscApsWaitToRestorePeriod | read-write | mandatory | This attribute specifies the time during which the protection line will remain the receive active line after the working line recovers from the fault that caus… |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.8 | ColumnmscApsSignalDegradeRatio | read-write | mandatory | This attribute specifies the minimum bit error ratio (BER) for which a Signal Degrade failure is declared. Its value is the exponent of the BER, with possible … |
| 1.3.6.1.4.1.562.36.2.1.134.12 | TablemscApsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.134.12.1 | RowmscApsStateEntry | not-accessible | mandatory | An entry in the mscApsStateTable. |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.1 | ColumnmscApsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.2 | ColumnmscApsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.3 | ColumnmscApsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.4 | ColumnmscApsAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.5 | ColumnmscApsProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.6 | ColumnmscApsControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.7 | ColumnmscApsAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.8 | ColumnmscApsStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.134.12.1.9 | ColumnmscApsUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.134.13 | TablemscApsOperTable | not-accessible | mandatory | This group contains the operational attributes for the Aps component. |
| 1.3.6.1.4.1.562.36.2.1.134.13.1 | RowmscApsOperEntry | not-accessible | mandatory | An entry in the mscApsOperTable. |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.1 | ColumnmscApsNearEndRxActiveLine | read-only | mandatory | This attribute indicates which near end line is active for receiving data from the far end. |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.2 | ColumnmscApsNearEndRequest | read-only | mandatory | This attribute indicates the request currently being transmitted to the far end in the SONET/SDH line overhead K1 byte of the protection line. Requests are pri… |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.3 | ColumnmscApsNearEndRequestChannel | read-only | mandatory | This attribute indicates to which channel the nearEndRequest applies. |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.4 | ColumnmscApsFarEndRequest | read-only | mandatory | This attribute indicates the request currently being received from the far end in the SONET/SDH line overhead K1 byte of the protection line. Requests are prio… |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.5 | ColumnmscApsFarEndRequestChannel | read-only | mandatory | This attribute indicates to which channel the farEndRequest applies. |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.6 | ColumnmscApsSdOnLines | read-only | mandatory | This attribute indicates which lines (if any) are currently experiencing a Signal Degrade (SD). Description of bits: protection(0) working(1) |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.7 | ColumnmscApsSwitchovers | read-only | mandatory | This attributes counts the number of times that a switchover of the active line has occurred since the Aps component became active. |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.8 | ColumnmscApsTimeUntilRestore | read-only | mandatory | This attribute indicates the amount of time in minutes until the receive active line is automatically switched back from the protection line to the working lin… |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.9 | ColumnmscApsProtocolFailureAlarm | read-only | mandatory | This attribute indicates whether the Aps component is experiencing an APS protocol failure alarm. Protocol failure alarms include the protection switching byte… |
| 1.3.6.1.4.1.562.36.2.1.134.13.1.10 | ColumnmscApsModeMismatchAlarm | read-only | mandatory | This attribute indicates whether the Aps component is experiencing an APS mode mismatch alarm (code 7011 5272). This alarm indicates either: (1) that the far e… |
| 1.3.6.1.4.1.562.36.2.2.136 | NodeapsMIB | |||
| 1.3.6.1.4.1.562.36.2.2.136.1 | NodeapsGroup | |||
| 1.3.6.1.4.1.562.36.2.2.136.1.1 | NodeapsGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.136.1.1.3 | NodeapsGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.136.1.1.3.2 | NodeapsGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.136.3 | NodeapsCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.136.3.1 | NodeapsCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.136.3.1.3 | NodeapsCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.136.3.1.3.2 | NodeapsCapabilitiesCA02A |