Nortel-MsCarrier-MscPassport-AtmBaseMIB
246 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.19 | NodemscLpArc | |||
| 1.3.6.1.4.1.562.36.2.1.12.19.1 | TablemscLpArcRowStatusTable | not-accessible | obsolete | This entry controls the addition and deletion of mscLpArc components. |
| 1.3.6.1.4.1.562.36.2.1.12.19.1.1 | RowmscLpArcRowStatusEntry | not-accessible | obsolete | A single entry in the table represents a single mscLpArc component. |
| 1.3.6.1.4.1.562.36.2.1.12.19.1.1.1 | ColumnmscLpArcRowStatus | read-write | obsolete | This variable is used as the basis for SNMP naming of mscLpArc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.19.1.1.2 | ColumnmscLpArcComponentName | read-only | obsolete | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.19.1.1.4 | ColumnmscLpArcStorageType | read-only | obsolete | This variable represents the storage type value for the mscLpArc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.19.1.1.10 | ColumnmscLpArcIndex | not-accessible | obsolete | This variable represents the index for the mscLpArc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.19.100 | TablemscLpArcProvTable | not-accessible | obsolete | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services. Note that altering any of these p… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1 | RowmscLpArcProvEntry | not-accessible | obsolete | An entry in the mscLpArcProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.5 | ColumnmscLpArcTotalConnectionPoolCapacity | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name. This attribute specifies the maximum number of connections (both VCC and VPC) tha… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.6 | ColumnmscLpArcMulticastBranchesCapacity | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name. This attribute specifies the number of multicast branches that can be enabled on … |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.10 | ColumnmscLpArcTxFrameMemoryAllocation | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Ov attribute txCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting thi… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.20 | ColumnmscLpArcRxFrameMemoryAllocation | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Ov attribute rxCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting thi… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.25 | ColumnmscLpArcPerVcQueueInterfaces | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute specifies the number of independent ports or IMA components wh… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.30 | ColumnmscLpArcShapingStackAllocation | read-write | obsolete | This attribute is migrated to the perVcQueueInterfaces attribute of the Lp/n Eng Arc Cqc Ov. Value ~0,~1,~2 is migrated to the value 0; value 0,~1,~2 is migrat… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.40 | ColumnmscLpArcShapingScalingFactor | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute specifies the scaling factor which is to be applied to all sha… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.41 | ColumnmscLpArcCdvAttenuation | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute cdvReduction. This attribute enables the attenuation of the maximum Cell Delay Variation (CDV) … |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.42 | ColumnmscLpArcPortAggregation | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute portCongestionPolicy. This attribute specifies whether port aggregation is turned on or off for… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.43 | ColumnmscLpArcSubConnectionPoolCapacity | read-write | obsolete | This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name. This attribute specifies the maximum number of sub-connections for the LogicalPr… |
| 1.3.6.1.4.1.562.36.2.1.12.19.100.1.44 | ColumnmscLpArcLnnConnectionPoolCapacity | read-write | obsolete | This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name. This attribute specifies the maximum number of resource records for the connecti… |
| 1.3.6.1.4.1.562.36.2.1.12.19.291 | TablemscLpArcConnCapTable | not-accessible | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute is provided for backward compatibility and can only be used if… |
| 1.3.6.1.4.1.562.36.2.1.12.19.291.1 | RowmscLpArcConnCapEntry | not-accessible | obsolete | An entry in the mscLpArcConnCapTable. |
| 1.3.6.1.4.1.562.36.2.1.12.19.291.1.1 | ColumnmscLpArcConnCapIndex | not-accessible | obsolete | This variable represents the mscLpArcConnCapTable specific index for the mscLpArcConnCapTable. |
| 1.3.6.1.4.1.562.36.2.1.12.19.291.1.2 | ColumnmscLpArcConnCapValue | read-write | obsolete | This variable represents an individual value for the mscLpArcConnCapTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20 | NodemscLpAru | |||
| 1.3.6.1.4.1.562.36.2.1.12.20.1 | TablemscLpAruRowStatusTable | not-accessible | obsolete | This entry controls the addition and deletion of mscLpAru components. |
| 1.3.6.1.4.1.562.36.2.1.12.20.1.1 | RowmscLpAruRowStatusEntry | not-accessible | obsolete | A single entry in the table represents a single mscLpAru component. |
| 1.3.6.1.4.1.562.36.2.1.12.20.1.1.1 | ColumnmscLpAruRowStatus | read-only | obsolete | This variable is used as the basis for SNMP naming of mscLpAru components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.20.1.1.2 | ColumnmscLpAruComponentName | read-only | obsolete | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.20.1.1.4 | ColumnmscLpAruStorageType | read-only | obsolete | This variable represents the storage type value for the mscLpAru tables. |
| 1.3.6.1.4.1.562.36.2.1.12.20.1.1.10 | ColumnmscLpAruIndex | not-accessible | obsolete | This variable represents the index for the mscLpAru tables. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100 | TablemscLpAruOperTable | not-accessible | obsolete | This group describes the usage of ATM-specific resources on a Logical Processor running ATM services. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1 | RowmscLpAruOperEntry | not-accessible | obsolete | An entry in the mscLpAruOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.5 | ColumnmscLpAruTotalConnectionPoolUsage | read-only | obsolete | If the LogicalProcessor is associated with a card of a cardType other than 4pE1Aal1 or 4pDS1Aal1, this attribute indicates the total number of enabled VCCs and… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.6 | ColumnmscLpAruMulticastBranchesUsage | read-only | obsolete | This attribute indicates the total number of multicast branches that are active on the Logical Processor. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.10 | ColumnmscLpAruTxCellBlockCapacity | read-only | obsolete | This attribute indicates the amount of memory reserved for storing ATM cells to be transmitted by the Lp. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.20 | ColumnmscLpAruTxCellBlockUsage | read-only | obsolete | This attribute indicates the amount of memory currently being used to store ATM cells to be transmitted by the Lp. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.23 | ColumnmscLpAruTxCellFreeListSize | read-only | obsolete | This attribute indicates the current size of the transmit cell free list. The transmit cell free list is the memory available for storing ATM cells to be trans… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.26 | ColumnmscLpAruTxCellFreeListCongestionState | read-only | obsolete | This attribute indicates the congestion state of the transmit cell free list on this ATM-FP. The congestion state of a free list is indicated by a numeric valu… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.30 | ColumnmscLpAruTxFrameMemoryAllocation | read-only | obsolete | This attribute defines the percentage of the transmit CQM memory which is allocated to the transmit frame free list on the ATM-FP. The remaining transmit CQM m… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.40 | ColumnmscLpAruTxFrameBlockCapacity | read-only | obsolete | This attribute indicates the amount of memory reserved for storing frames to be transmitted by the Lp. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.50 | ColumnmscLpAruTxFrameBlockUsage | read-only | obsolete | This attribute indicates the amount of memory currently being used to store frames to be transmitted by the Lp. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.53 | ColumnmscLpAruTxFrameFreeListSize | read-only | obsolete | This attribute indicates the current size of the transmit frame free list. The transmit frame free list is the memory (in ATM cells) available for storing fram… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.56 | ColumnmscLpAruTxFrameFreeListCongestionState | read-only | obsolete | This attribute indicates the congestion state of the transmit frame free list on this ATM-FP. The congestion state of a free list is indicated by a numeric val… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.60 | ColumnmscLpAruRxCellBlockCapacity | read-only | obsolete | This attribute indicates the amount of memory reserved for storing ATM cells received by the Lp. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.70 | ColumnmscLpAruRxCellBlockUsage | read-only | obsolete | This attribute indicates the amount of memory currently being used to store ATM cells received by the Lp. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.73 | ColumnmscLpAruRxCellFreeListSize | read-only | obsolete | This attribute indicates the current size of the receive cell free list. The receive cell free list is the memory available for storing ATM cells received by t… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.76 | ColumnmscLpAruRxCellFreeListCongestionState | read-only | obsolete | This attribute indicates the congestion state of the receive cell free list on this ATM-FP. The congestion state of a free list is indicated by a numeric value… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.80 | ColumnmscLpAruRxFrameMemoryAllocation | read-only | obsolete | This attribute indicates the percentage of the receive CQM memory which is allocated to the receive frame free list on the ATM-FP. The remaining receive CQM me… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.90 | ColumnmscLpAruRxFrameBlockCapacity | read-only | obsolete | This attribute indicates the amount of memory reserved for storing frames received by the Lp. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.100 | ColumnmscLpAruRxFrameBlockUsage | read-only | obsolete | This attribute indicates the amount of memory currently being used to store frames received by the Lp. |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.103 | ColumnmscLpAruRxFrameFreeListSize | read-only | obsolete | This attribute indicates the current size of the receive frame free list. The receive frame free list is the memory (in ATM cells) available for storing frames… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.106 | ColumnmscLpAruRxFrameFreeListCongestionState | read-only | obsolete | This attribute indicates the congestion state of the receive frame free list on this ATM-FP. The congestion state of a free list is indicated by a numeric valu… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.107 | ColumnmscLpAruSubConnectionPoolAvailable | read-only | obsolete | This attribute indicates the number of sub-connections available for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the … |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.108 | ColumnmscLpAruSubConnectionPoolUsage | read-only | obsolete | This attribute indicates the number of sub-connections being utilized for the LogicalProcessor. A sub-connection is used for interworking the ATM services with… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.109 | ColumnmscLpAruLnnConnectionPoolAvailable | read-only | obsolete | This attribute indicates the number of resource records available for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A log… |
| 1.3.6.1.4.1.562.36.2.1.12.20.100.1.110 | ColumnmscLpAruLnnConnectionPoolUsage | read-only | obsolete | This attribute indicates the number of resource records being utilized for the connections which use Logical Network Number (LNN) on the LogicalProcessor. A lo… |
| 1.3.6.1.4.1.562.36.2.1.12.20.292 | TablemscLpAruConnUsageTable | not-accessible | obsolete | This attribute has been replaced by the set of AtmIf CA connectionPoolUsage attributes for AtmIf associated to independent links or IMA groups on this LogicalP… |
| 1.3.6.1.4.1.562.36.2.1.12.20.292.1 | RowmscLpAruConnUsageEntry | not-accessible | obsolete | An entry in the mscLpAruConnUsageTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.292.1.1 | ColumnmscLpAruConnUsageIndex | not-accessible | obsolete | This variable represents the mscLpAruConnUsageTable specific index for the mscLpAruConnUsageTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.292.1.2 | ColumnmscLpAruConnUsageValue | read-only | obsolete | This variable represents an individual value for the mscLpAruConnUsageTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.353 | TablemscLpAruTxCflThreshTable | not-accessible | obsolete | This attribute indicates the maximum value of the txCellFreeListSize and the discard thresholds of the transmit cell free list. The transmit cell free list is … |
| 1.3.6.1.4.1.562.36.2.1.12.20.353.1 | RowmscLpAruTxCflThreshEntry | not-accessible | obsolete | An entry in the mscLpAruTxCflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.353.1.1 | ColumnmscLpAruTxCflThreshIndex | not-accessible | obsolete | This variable represents the mscLpAruTxCflThreshTable specific index for the mscLpAruTxCflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.353.1.2 | ColumnmscLpAruTxCflThreshValue | read-only | obsolete | This variable represents an individual value for the mscLpAruTxCflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.354 | TablemscLpAruTxFflThreshTable | not-accessible | obsolete | This attribute indicates the maximum txFrameFeeListSize and the discard thresholds of the transmit frame free list. The transmit frame free list is the memory … |
| 1.3.6.1.4.1.562.36.2.1.12.20.354.1 | RowmscLpAruTxFflThreshEntry | not-accessible | obsolete | An entry in the mscLpAruTxFflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.354.1.1 | ColumnmscLpAruTxFflThreshIndex | not-accessible | obsolete | This variable represents the mscLpAruTxFflThreshTable specific index for the mscLpAruTxFflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.354.1.2 | ColumnmscLpAruTxFflThreshValue | read-only | obsolete | This variable represents an individual value for the mscLpAruTxFflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.355 | TablemscLpAruRxCflThreshTable | not-accessible | obsolete | This attribute indicates the maximum value of the rxCellFreeListSize and the discard thresholds of the receive cell free list. The receive cell free list is th… |
| 1.3.6.1.4.1.562.36.2.1.12.20.355.1 | RowmscLpAruRxCflThreshEntry | not-accessible | obsolete | An entry in the mscLpAruRxCflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.355.1.1 | ColumnmscLpAruRxCflThreshIndex | not-accessible | obsolete | This variable represents the mscLpAruRxCflThreshTable specific index for the mscLpAruRxCflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.355.1.2 | ColumnmscLpAruRxCflThreshValue | read-only | obsolete | This variable represents an individual value for the mscLpAruRxCflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.356 | TablemscLpAruRxFflThreshTable | not-accessible | obsolete | This attribute indicates the maximum rxFrameFeeListSize and the discard thresholds of the transmit frame free list. The receive frame free list is the memory (… |
| 1.3.6.1.4.1.562.36.2.1.12.20.356.1 | RowmscLpAruRxFflThreshEntry | not-accessible | obsolete | An entry in the mscLpAruRxFflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.356.1.1 | ColumnmscLpAruRxFflThreshIndex | not-accessible | obsolete | This variable represents the mscLpAruRxFflThreshTable specific index for the mscLpAruRxFflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.20.356.1.2 | ColumnmscLpAruRxFflThreshValue | read-only | obsolete | This variable represents an individual value for the mscLpAruRxFflThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5 | NodemscLpEngArc | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.5.1 | TablemscLpEngArcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngArc components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.1.1 | RowmscLpEngArcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngArc component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.1.1.1 | ColumnmscLpEngArcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngArc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.1.1.2 | ColumnmscLpEngArcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.1.1.4 | ColumnmscLpEngArcStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngArc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.1.1.10 | ColumnmscLpEngArcIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngArc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2 | NodemscLpEngArcOv | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.1 | TablemscLpEngArcOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngArcOv components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.1.1 | RowmscLpEngArcOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngArcOv component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.1.1.1 | ColumnmscLpEngArcOvRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngArcOv components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.1.1.2 | ColumnmscLpEngArcOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.1.1.4 | ColumnmscLpEngArcOvStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngArcOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.1.1.10 | ColumnmscLpEngArcOvIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngArcOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10 | TablemscLpEngArcOvProvTable | not-accessible | mandatory | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services on ATM cards. Note that altering a… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1 | RowmscLpEngArcOvProvEntry | not-accessible | mandatory | An entry in the mscLpEngArcOvProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.1 | ColumnmscLpEngArcOvTotalConnectionPoolCapacity | read-write | mandatory | This attribute specifies the maximum number of connections (VCC, VPC and VPT) that can be enabled on this FP.A standard Vpt uses 3 connections and a basic Vpt … |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.2 | ColumnmscLpEngArcOvMulticastBranchesCapacity | read-write | mandatory | This attribute specifies the number of multicast branches that can be enabled on this FP. A multicast branch is used for cell replication on a VCC connection w… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.3 | ColumnmscLpEngArcOvTxCellMemoryAllocation | read-write | mandatory | This attribute specifies the fraction of the transmit memory which should be allocated to the transmission of cells on an FP. The remaining memory is allocated… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.2.10.1.4 | ColumnmscLpEngArcOvRxCellMemoryAllocation | read-write | mandatory | This attribute specifies the fraction of the receive memory which should be allocated to the reception of cells on an FP. The remaining receive memory is alloc… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3 | NodemscLpEngArcCqc | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.1 | TablemscLpEngArcCqcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngArcCqc components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.1.1 | RowmscLpEngArcCqcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngArcCqc component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.1.1.1 | ColumnmscLpEngArcCqcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngArcCqc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.1.1.2 | ColumnmscLpEngArcCqcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.1.1.4 | ColumnmscLpEngArcCqcStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngArcCqc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.1.1.10 | ColumnmscLpEngArcCqcIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngArcCqc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2 | NodemscLpEngArcCqcOv | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.1 | TablemscLpEngArcCqcOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngArcCqcOv components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.1.1 | RowmscLpEngArcCqcOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngArcCqcOv component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.1.1.1 | ColumnmscLpEngArcCqcOvRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpEngArcCqcOv components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.1.1.2 | ColumnmscLpEngArcCqcOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.1.1.4 | ColumnmscLpEngArcCqcOvStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngArcCqcOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.1.1.10 | ColumnmscLpEngArcCqcOvIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngArcCqcOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.10 | TablemscLpEngArcCqcOvProvTable | not-accessible | mandatory | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services. Note that altering any of these p… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.10.1 | RowmscLpEngArcCqcOvProvEntry | not-accessible | mandatory | An entry in the mscLpEngArcCqcOvProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.10.1.1 | ColumnmscLpEngArcCqcOvPerVcQueueInterfaces | read-write | mandatory | This attribute specifies the number of independent ports or IMA components which support shaping and per-VC queueing on this FP. When this attribute is not zer… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.10.1.2 | ColumnmscLpEngArcCqcOvShapingScalingFactor | read-write | mandatory | This attribute specifies the scaling factor which is to be applied to all shaping rates for this FP. The scaling factor is an inverse factor which is applied t… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.10.1.3 | ColumnmscLpEngArcCqcOvCdvReduction | read-write | mandatory | This attribute specifies the reduction of the maximum Cell Delay Variation (CDV) of shaped transmit traffic. When the value of this attribute is set to disable… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.10.1.4 | ColumnmscLpEngArcCqcOvPortCongestionPolicy | read-write | mandatory | This attribute specifies the congestion behavior of all ports on this FP. It applies only to transmit traffic served on the common queues and does not apply to… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.450 | TablemscLpEngArcCqcOvConnCapTable | not-accessible | mandatory | This attribute is provided for backward compatibility and can only be used if the LogicalProcessor is associated with a card of one of the following cardType: … |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.450.1 | RowmscLpEngArcCqcOvConnCapEntry | not-accessible | mandatory | An entry in the mscLpEngArcCqcOvConnCapTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.450.1.1 | ColumnmscLpEngArcCqcOvConnCapIndex | not-accessible | mandatory | This variable represents the mscLpEngArcCqcOvConnCapTable specific index for the mscLpEngArcCqcOvConnCapTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.2.450.1.2 | ColumnmscLpEngArcCqcOvConnCapValue | read-write | mandatory | This variable represents an individual value for the mscLpEngArcCqcOvConnCapTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.10 | TablemscLpEngArcCqcOperTable | not-accessible | mandatory | This group describes the usage of ATM-specific resources on a Logical Processor running ATM services on a CQC based card. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.10.1 | RowmscLpEngArcCqcOperEntry | not-accessible | mandatory | An entry in the mscLpEngArcCqcOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.3.10.1.1 | ColumnmscLpEngArcCqcCdvReduction | read-only | mandatory | This attribute indicates if the reduction of the maximum Cell Delay Variation (CDV) of shaped transmit traffic is applicable. When the value of this attribute … |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4 | NodemscLpEngArcAqm | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.1 | TablemscLpEngArcAqmRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngArcAqm components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.1.1 | RowmscLpEngArcAqmRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngArcAqm component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.1.1.1 | ColumnmscLpEngArcAqmRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngArcAqm components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.1.1.2 | ColumnmscLpEngArcAqmComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.1.1.4 | ColumnmscLpEngArcAqmStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngArcAqm tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.1.1.10 | ColumnmscLpEngArcAqmIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngArcAqm tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2 | NodemscLpEngArcAqmOv | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.1 | TablemscLpEngArcAqmOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngArcAqmOv components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.1.1 | RowmscLpEngArcAqmOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngArcAqmOv component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.1.1.1 | ColumnmscLpEngArcAqmOvRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpEngArcAqmOv components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.1.1.2 | ColumnmscLpEngArcAqmOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.1.1.4 | ColumnmscLpEngArcAqmOvStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngArcAqmOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.1.1.10 | ColumnmscLpEngArcAqmOvIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngArcAqmOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.10 | TablemscLpEngArcAqmOvProvTable | not-accessible | mandatory | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services on CQC based cards. Note that alte… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.10.1 | RowmscLpEngArcAqmOvProvEntry | not-accessible | mandatory | An entry in the mscLpEngArcAqmOvProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.10.1.1 | ColumnmscLpEngArcAqmOvConnectionPoolCapacity | read-write | mandatory | This attribute specifies the maximum number of connections (VCC, VPC and VPT) that can be configured on the AQM instance of the LogicalProcessor. The value of … |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.10.1.2 | ColumnmscLpEngArcAqmOvHighPriorityEpdOffset | read-write | mandatory | This attribute specifies the high priority Early Packet Discard (EPD) offset for connection queues. On ATM IP FPs a given connection queue is associated with o… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.10.1.3 | ColumnmscLpEngArcAqmOvLowPriorityEpdOffset | read-write | mandatory | This attribute specifies the low priority Early Packet Discard (EPD) offset for connection queues. On ATM IP FPs a given connection queue is associated with on… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.2.10.1.4 | ColumnmscLpEngArcAqmOvPortCongestionPolicy | read-write | mandatory | This attribute specifies the congestion behavior of all ports on this FP. It applies only to transmit traffic and does not apply to the CBR service category. W… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.10 | TablemscLpEngArcAqmOperTable | not-accessible | mandatory | This group describes the usage of ATM-specific resources for a specific AQM on a Logical Processor running ATM services. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.10.1 | RowmscLpEngArcAqmOperEntry | not-accessible | mandatory | An entry in the mscLpEngArcAqmOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.10.1.1 | ColumnmscLpEngArcAqmConnectionPoolAvailable | read-only | mandatory | This attribute indicates the number of connection resources available (VCC, VPC and VPT) that can be configured on the AQM instance of the LogicalProcessor. A … |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.10.1.2 | ColumnmscLpEngArcAqmConnectionPoolUsage | read-only | mandatory | This attribute indicates the total number of configured VCCs, VPCs and VPTs in AtmIfs associated with the AQM instance of the LogicalProcessor. A standard Vpt … |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.10.1.5 | ColumnmscLpEngArcAqmTxCellMemoryAvailable | read-only | mandatory | This attribute indicates the current availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be tra… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.10.1.6 | ColumnmscLpEngArcAqmTxCellMemoryMinAvailable | read-only | mandatory | This attribute indicates the lowest availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be tran… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.10.1.7 | ColumnmscLpEngArcAqmTxCellMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the transmit cell memory on this FP. The congestion state of memory is indicated by a numeric value ranging fr… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.448 | TablemscLpEngArcAqmTxCellThreshTable | not-accessible | mandatory | This attribute indicates the total transmit cell memory size and the discard thresholds of the transmit cell memory. The transmit cell memory is the memory use… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.448.1 | RowmscLpEngArcAqmTxCellThreshEntry | not-accessible | mandatory | An entry in the mscLpEngArcAqmTxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.448.1.1 | ColumnmscLpEngArcAqmTxCellThreshIndex | not-accessible | mandatory | This variable represents the mscLpEngArcAqmTxCellThreshTable specific index for the mscLpEngArcAqmTxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.4.448.1.2 | ColumnmscLpEngArcAqmTxCellThreshValue | read-only | mandatory | This variable represents an individual value for the mscLpEngArcAqmTxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10 | TablemscLpEngArcOperTable | not-accessible | mandatory | This group describes the usage of ATM-specific resources on a Logical Processor running ATM services. The attributes listed represent Queue Controller resource… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1 | RowmscLpEngArcOperEntry | not-accessible | mandatory | An entry in the mscLpEngArcOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.1 | ColumnmscLpEngArcTotalConnectionPoolAvailable | read-only | mandatory | This attribute indicates the number of connection resources available (VCC, VPC, and VPT) that can be used on this FP. A standard Vpt uses 3 connection resourc… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.2 | ColumnmscLpEngArcTotalConnectionPoolUsage | read-only | mandatory | This attribute indicates the number of connection resources (VCC, VPC, and VPT) in use on this FP. A standard Vpt uses 3 connection resources and a basic Vpt u… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.3 | ColumnmscLpEngArcMulticastBranchesAvailable | read-only | mandatory | This attribute indicates the total number of multicast branches that are available on this FP. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.4 | ColumnmscLpEngArcMulticastBranchesUsage | read-only | mandatory | This attribute indicates the total number of multicast branches that are active on this FP. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.5 | ColumnmscLpEngArcTxCellMemoryAllocation | read-only | mandatory | This attribute indicates the fraction of the transmit memory which is allocated for the transmission of cells on the FP. Cell memory is used for Atm Bearer Ser… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.6 | ColumnmscLpEngArcTxCellMemoryAvailable | read-only | mandatory | This attribute indicates the current availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be tra… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.7 | ColumnmscLpEngArcTxCellMemoryMinAvailable | read-only | mandatory | This attribute indicates the lowest availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be tran… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.8 | ColumnmscLpEngArcTxCellMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the transmit cell memory on this FP. The congestion state of memory is indicated by a numeric value ranging fr… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.9 | ColumnmscLpEngArcRxCellMemoryAllocation | read-only | mandatory | This attribute indicates the fraction of the receive memory which is allocated for the reception of cells on the FP. Cell memory is used for Atm Bearer Service… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.10 | ColumnmscLpEngArcRxCellMemoryAvailable | read-only | mandatory | This attribute indicates the current availability of the receive cell memory. The receive cell memory is the memory available for storing ATM cells to be trans… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.11 | ColumnmscLpEngArcRxCellMemoryMinAvailable | read-only | mandatory | This attribute indicates the lowest availability of the receive cell memory. The receive cell memory is the memory available for storing ATM cells to be transm… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.10.1.12 | ColumnmscLpEngArcRxCellMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the receive cell memory on this FP. The congestion state of memory is indicated by a numeric value ranging fro… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.440 | TablemscLpEngArcTxCellThreshTable | not-accessible | mandatory | This attribute indicates the total transmit cell memory size and the discard thresholds of the transmit cell memory. The transmit cell memory is the memory use… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.440.1 | RowmscLpEngArcTxCellThreshEntry | not-accessible | mandatory | An entry in the mscLpEngArcTxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.440.1.1 | ColumnmscLpEngArcTxCellThreshIndex | not-accessible | mandatory | This variable represents the mscLpEngArcTxCellThreshTable specific index for the mscLpEngArcTxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.440.1.2 | ColumnmscLpEngArcTxCellThreshValue | read-only | mandatory | This variable represents an individual value for the mscLpEngArcTxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.444 | TablemscLpEngArcRxCellThreshTable | not-accessible | mandatory | This attribute indicates the total receive cell memory size and the discard thresholds of the receive cell memory. The receive cell memory is the memory used f… |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.444.1 | RowmscLpEngArcRxCellThreshEntry | not-accessible | mandatory | An entry in the mscLpEngArcRxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.444.1.1 | ColumnmscLpEngArcRxCellThreshIndex | not-accessible | mandatory | This variable represents the mscLpEngArcRxCellThreshTable specific index for the mscLpEngArcRxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.5.444.1.2 | ColumnmscLpEngArcRxCellThreshValue | read-only | mandatory | This variable represents an individual value for the mscLpEngArcRxCellThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6 | NodemscLpEngFcrc | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.6.1 | TablemscLpEngFcrcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngFcrc components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.1.1 | RowmscLpEngFcrcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngFcrc component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.1.1.1 | ColumnmscLpEngFcrcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngFcrc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.1.1.2 | ColumnmscLpEngFcrcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.1.1.4 | ColumnmscLpEngFcrcStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngFcrc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.1.1.10 | ColumnmscLpEngFcrcIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngFcrc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2 | NodemscLpEngFcrcOv | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.1 | TablemscLpEngFcrcOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngFcrcOv components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.1.1 | RowmscLpEngFcrcOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngFcrcOv component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.1.1.1 | ColumnmscLpEngFcrcOvRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngFcrcOv components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.1.1.2 | ColumnmscLpEngFcrcOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.1.1.4 | ColumnmscLpEngFcrcOvStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngFcrcOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.1.1.10 | ColumnmscLpEngFcrcOvIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngFcrcOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.10 | TablemscLpEngFcrcOvProvTable | not-accessible | mandatory | This group contains frame services provisionable engineering parameters for this LogicalProcessor. Note that altering any of these parameters will result in a … |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.10.1 | RowmscLpEngFcrcOvProvEntry | not-accessible | mandatory | An entry in the mscLpEngFcrcOvProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.10.1.1 | ColumnmscLpEngFcrcOvSubConnectionPoolCapacity | read-write | mandatory | This attribute indicates the maximum number of sub-connections for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the fr… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.2.10.1.2 | ColumnmscLpEngFcrcOvLnnConnectionPoolCapacity | read-write | mandatory | This attribute indicates the maximum number of resource records for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A logic… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3 | NodemscLpEngFcrcPqc | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.1 | TablemscLpEngFcrcPqcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngFcrcPqc components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.1.1 | RowmscLpEngFcrcPqcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngFcrcPqc component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.1.1.1 | ColumnmscLpEngFcrcPqcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngFcrcPqc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.1.1.2 | ColumnmscLpEngFcrcPqcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.1.1.4 | ColumnmscLpEngFcrcPqcStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngFcrcPqc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.1.1.10 | ColumnmscLpEngFcrcPqcIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngFcrcPqc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2 | NodemscLpEngFcrcPqcOv | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.1 | TablemscLpEngFcrcPqcOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngFcrcPqcOv components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.1.1 | RowmscLpEngFcrcPqcOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngFcrcPqcOv component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.1.1.1 | ColumnmscLpEngFcrcPqcOvRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpEngFcrcPqcOv components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.1.1.2 | ColumnmscLpEngFcrcPqcOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.1.1.4 | ColumnmscLpEngFcrcPqcOvStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngFcrcPqcOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.1.1.10 | ColumnmscLpEngFcrcPqcOvIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngFcrcPqcOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.10 | TablemscLpEngFcrcPqcOvProvTable | not-accessible | mandatory | This group is used for fine tuning resource configuration of frame services on a PQC based Logical Processor. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.10.1 | RowmscLpEngFcrcPqcOvProvEntry | not-accessible | mandatory | An entry in the mscLpEngFcrcPqcOvProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.2.10.1.1 | ColumnmscLpEngFcrcPqcOvIpRoutesPoolCapacity | read-write | mandatory | This attribute indicates the number of desired IP routing entries for the Logical Processor. It is used to determine the number of IP routing resources to be a… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.10 | TablemscLpEngFcrcPqcOperTable | not-accessible | mandatory | This group describes the usage of resources specific to frame services on a PQC based FP. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.10.1 | RowmscLpEngFcrcPqcOperEntry | not-accessible | mandatory | An entry in the mscLpEngFcrcPqcOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.10.1.1 | ColumnmscLpEngFcrcPqcIpRoutesPoolSize | read-only | mandatory | This attribute indicates the number of IP routing entries permitted on the Logical Processor. If there are enough resources on the card, this value is equal to… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.10.1.2 | ColumnmscLpEngFcrcPqcIpRoutesPoolUsage | read-only | mandatory | This attribute represents the current number of IP routing entries that are in use. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.3.10.1.3 | ColumnmscLpEngFcrcPqcIpRoutesPoolAvailableEst | read-only | mandatory | Each IP routing resource can hold between one and three IP routing entries. Therefore, it is not possible to know exactly how many more IP routing entries can … |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10 | TablemscLpEngFcrcOperTable | not-accessible | mandatory | This group indicates the configuration of processor-wide frame specific resources on a LogicalProcessor. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1 | RowmscLpEngFcrcOperEntry | not-accessible | mandatory | An entry in the mscLpEngFcrcOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.1 | ColumnmscLpEngFcrcSubConnectionPoolAvailable | read-only | mandatory | This attribute indicates the number of sub-connections available for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the … |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.2 | ColumnmscLpEngFcrcSubConnectionPoolUsage | read-only | mandatory | This attribute indicates the number of sub-connections being utilized by the LogicalProcessor. A sub-connection is used for interworking the ATM services with … |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.3 | ColumnmscLpEngFcrcLnnConnectionPoolAvailable | read-only | mandatory | This attribute indicates the number of resource records available for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A log… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.4 | ColumnmscLpEngFcrcLnnConnectionPoolUsage | read-only | mandatory | This attribute indicates the number of resource records being utilized for the connections which use Logical Network Number (LNN) on the LogicalProcessor. A lo… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.5 | ColumnmscLpEngFcrcTxFrameMemoryAvailable | read-only | mandatory | This attribute indicates the current availability of the transmit frame memory (in units of frames). The transmit frame memory is the memory available for stor… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.6 | ColumnmscLpEngFcrcTxFrameMemoryMinAvailable | read-only | mandatory | This attribute indicates the lowest availability of the transmit PQC/ CQC frame memory (in units of frames). The transmit frame memory is the memory available … |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.7 | ColumnmscLpEngFcrcTxFrameMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the transmit frame memory on this FP. The congestion state of memory is indicated by a numeric value ranging f… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.8 | ColumnmscLpEngFcrcRxFrameMemoryAvailable | read-only | mandatory | This attribute indicates the current availability of the receive frame memory (in units of frames). The receive frame memory is the memory available for storin… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.9 | ColumnmscLpEngFcrcRxFrameMemoryMinAvailable | read-only | mandatory | This attribute indicates the lowest availability of the receive frame memory (in units of frames). The receive frame memory is the memory available for storing… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.10.1.10 | ColumnmscLpEngFcrcRxFrameMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the receive frame memory on this FP. The congestion state of memory is indicated by a numeric value ranging fr… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.442 | TablemscLpEngFcrcTxFrThreshTable | not-accessible | mandatory | This attribute indicates the total transmit frame memory size and the discard thresholds of the transmit frame memory. The transmit frame memory is the memory … |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.442.1 | RowmscLpEngFcrcTxFrThreshEntry | not-accessible | mandatory | An entry in the mscLpEngFcrcTxFrThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.442.1.1 | ColumnmscLpEngFcrcTxFrThreshIndex | not-accessible | mandatory | This variable represents the mscLpEngFcrcTxFrThreshTable specific index for the mscLpEngFcrcTxFrThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.442.1.2 | ColumnmscLpEngFcrcTxFrThreshValue | read-only | mandatory | This variable represents an individual value for the mscLpEngFcrcTxFrThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.446 | TablemscLpEngFcrcRxFrThreshTable | not-accessible | mandatory | This attribute indicates the total received frame memory size and the discard thresholds of the receive frame memory. The receive frame memory is the memory (i… |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.446.1 | RowmscLpEngFcrcRxFrThreshEntry | not-accessible | mandatory | An entry in the mscLpEngFcrcRxFrThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.446.1.1 | ColumnmscLpEngFcrcRxFrThreshIndex | not-accessible | mandatory | This variable represents the mscLpEngFcrcRxFrThreshTable specific index for the mscLpEngFcrcRxFrThreshTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.6.446.1.2 | ColumnmscLpEngFcrcRxFrThreshValue | read-only | mandatory | This variable represents an individual value for the mscLpEngFcrcRxFrThreshTable. |
| 1.3.6.1.4.1.562.36.2.2.63 | NodeatmBaseMIB | |||
| 1.3.6.1.4.1.562.36.2.2.63.1 | NodeatmBaseGroup | |||
| 1.3.6.1.4.1.562.36.2.2.63.1.1 | NodeatmBaseGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.63.1.1.3 | NodeatmBaseGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.63.1.1.3.2 | NodeatmBaseGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.63.3 | NodeatmBaseCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.63.3.1 | NodeatmBaseCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.63.3.1.3 | NodeatmBaseCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.63.3.1.3.2 | NodeatmBaseCapabilitiesCA02A |