Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
732 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex RowPointer RowStatus StorageType Unsigned32 |
| Nortel-MsCarrier-MscPassport-TextualConventionsMIB | AsciiString DigitString EnterpriseDateAndTime FixedPoint3 Hex HexString Link NonReplicated PassportCounter64 Unsigned64 |
| Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB | mscComponents mscPassportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.71 | NodemscFrUni | |||
| 1.3.6.1.4.1.562.36.2.1.71.1 | TablemscFrUniRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUni components. |
| 1.3.6.1.4.1.562.36.2.1.71.1.1 | RowmscFrUniRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUni component. |
| 1.3.6.1.4.1.562.36.2.1.71.1.1.1 | ColumnmscFrUniRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUni components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.1.1.2 | ColumnmscFrUniComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.1.1.4 | ColumnmscFrUniStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUni tables. |
| 1.3.6.1.4.1.562.36.2.1.71.1.1.10 | ColumnmscFrUniIndex | not-accessible | mandatory | This variable represents the index for the mscFrUni tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2 | NodemscFrUniDna | |||
| 1.3.6.1.4.1.562.36.2.1.71.2.1 | TablemscFrUniDnaRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDna components. |
| 1.3.6.1.4.1.562.36.2.1.71.2.1.1 | RowmscFrUniDnaRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDna component. |
| 1.3.6.1.4.1.562.36.2.1.71.2.1.1.1 | ColumnmscFrUniDnaRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDna components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.2.1.1.2 | ColumnmscFrUniDnaComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.2.1.1.4 | ColumnmscFrUniDnaStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDna tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2.1.1.10 | ColumnmscFrUniDnaIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDna tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2.2 | NodemscFrUniDnaCug | |||
| 1.3.6.1.4.1.562.36.2.1.71.2.2.1 | TablemscFrUniDnaCugRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDnaCug components. |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.1.1 | RowmscFrUniDnaCugRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDnaCug component. |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.1.1.1 | ColumnmscFrUniDnaCugRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDnaCug components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.1.1.2 | ColumnmscFrUniDnaCugComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.1.1.4 | ColumnmscFrUniDnaCugStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDnaCug tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.1.1.10 | ColumnmscFrUniDnaCugIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDnaCug tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.10 | TablemscFrUniDnaCugCugOptionsTable | not-accessible | mandatory | Attributes in this group define ClosedUserGroup options associated with interlockCode. DNA's with the same CUG (interlockCode) can make calls within this group… |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.10.1 | RowmscFrUniDnaCugCugOptionsEntry | not-accessible | mandatory | An entry in the mscFrUniDnaCugCugOptionsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.1 | ColumnmscFrUniDnaCugType | read-write | mandatory | This attribute specifies the CUG type - the CUG is either a national CUG, or an international CUG. International closed user groups are usually established bet… |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.2 | ColumnmscFrUniDnaCugDnic | read-write | mandatory | This attribute specifies the dnic (Data Network ID Code) of the CUG by which packet networks are identified. This attribute is not applicable if the CUG is a n… |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.3 | ColumnmscFrUniDnaCugInterlockCode | read-write | mandatory | This attribute specifies the CUG identifier of a national or international CUG call. It is an arbitrary number and it also can be called CUG in some descriptio… |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.4 | ColumnmscFrUniDnaCugPreferential | read-write | mandatory | The attribute 'preferential', if set to yes indicates that this CUG is the SIMPLE CUG (as defined in ITU X.36 [10/96]), in which case it will be used during th… |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.5 | ColumnmscFrUniDnaCugOutCalls | read-write | mandatory | This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) can be made using this particular CUG. If set to a value of dis… |
| 1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.6 | ColumnmscFrUniDnaCugIncCalls | read-write | mandatory | This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) can be made using this particular CUG. If set to disallowed, then… |
| 1.3.6.1.4.1.562.36.2.1.71.2.3 | NodemscFrUniDnaHgM | |||
| 1.3.6.1.4.1.562.36.2.1.71.2.3.1 | TablemscFrUniDnaHgMRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDnaHgM components. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.1.1 | RowmscFrUniDnaHgMRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDnaHgM component. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.1.1.1 | ColumnmscFrUniDnaHgMRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDnaHgM components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.1.1.2 | ColumnmscFrUniDnaHgMComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.1.1.4 | ColumnmscFrUniDnaHgMStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDnaHgM tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.1.1.10 | ColumnmscFrUniDnaHgMIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDnaHgM tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2 | NodemscFrUniDnaHgMHgAddr | |||
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.1 | TablemscFrUniDnaHgMHgAddrRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDnaHgMHgAddr components. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1 | RowmscFrUniDnaHgMHgAddrRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDnaHgMHgAddr component. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1.1 | ColumnmscFrUniDnaHgMHgAddrRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDnaHgMHgAddr components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1.2 | ColumnmscFrUniDnaHgMHgAddrComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1.4 | ColumnmscFrUniDnaHgMHgAddrStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDnaHgMHgAddr tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1.10 | ColumnmscFrUniDnaHgMHgAddrIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDnaHgMHgAddr tables. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.10 | TablemscFrUniDnaHgMHgAddrAddrTable | not-accessible | mandatory | This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.10.1 | RowmscFrUniDnaHgMHgAddrAddrEntry | not-accessible | mandatory | An entry in the mscFrUniDnaHgMHgAddrAddrTable. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.10.1.1 | ColumnmscFrUniDnaHgMHgAddrNumberingPlanIndicator | read-write | mandatory | This attribute indicates the Numbering Plan Indicator (NPI) of the DNA. The address may belong to X.121 or E.164 plans. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.2.10.1.2 | ColumnmscFrUniDnaHgMHgAddrDataNetworkAddress | read-write | mandatory | This attribute contains digits which form the unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where … |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.10 | TablemscFrUniDnaHgMIfTable | not-accessible | mandatory | This group contains the interface parameters between the HuntGroupMember and the hunt group server. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.10.1 | RowmscFrUniDnaHgMIfEntry | not-accessible | mandatory | An entry in the mscFrUniDnaHgMIfTable. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.10.1.1 | ColumnmscFrUniDnaHgMAvailabilityUpdateThreshold | read-write | mandatory | This attribute specifies how much availableAggregateCIR can change before an Availability Message Packet (AMP) is sent to the hunt group server informing it of… |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.11 | TablemscFrUniDnaHgMOpTable | not-accessible | mandatory | This group contains the operational attributes of the HuntGroupMember component. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.11.1 | RowmscFrUniDnaHgMOpEntry | not-accessible | mandatory | An entry in the mscFrUniDnaHgMOpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.11.1.1 | ColumnmscFrUniDnaHgMMaximumAvailableAggregateCir | read-only | mandatory | This attribute indicates the maximum available bandwidth for this hunt group member. This value represents the total sum of the sixteen egress bandwidth pools.… |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.11.1.2 | ColumnmscFrUniDnaHgMAvailableAggregateCir | read-only | mandatory | This attribute indicates the current total available bandwidth reported to the hunt group server in the Availability Message Packet (AMP). This value represent… |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.11.1.3 | ColumnmscFrUniDnaHgMAvailabilityDelta | read-only | mandatory | This attribute indicates the net change in the available aggregate CIR since the last Availability Message Packet (AMP) was sent to the Hunt Group. Once the ab… |
| 1.3.6.1.4.1.562.36.2.1.71.2.3.11.1.5 | ColumnmscFrUniDnaHgMAvailableDlcis | read-only | mandatory | This attribute indicates the number of DLCIs available for SVCs on the interface associated with this DNA. If this value reaches 0, an AMP with zero availabili… |
| 1.3.6.1.4.1.562.36.2.1.71.2.10 | TablemscFrUniDnaAddressTable | not-accessible | mandatory | This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes. |
| 1.3.6.1.4.1.562.36.2.1.71.2.10.1 | RowmscFrUniDnaAddressEntry | not-accessible | mandatory | An entry in the mscFrUniDnaAddressTable. |
| 1.3.6.1.4.1.562.36.2.1.71.2.10.1.1 | ColumnmscFrUniDnaNumberingPlanIndicator | read-write | mandatory | This attribute indicates the Numbering Plan Indicator (NPI) of the DNA that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet swi… |
| 1.3.6.1.4.1.562.36.2.1.71.2.10.1.2 | ColumnmscFrUniDnaDataNetworkAddress | read-write | mandatory | This attribute indicates the customer's unique identifier. It is the equivalent of the telephone number in the telephone network. |
| 1.3.6.1.4.1.562.36.2.1.71.2.11 | TablemscFrUniDnaOutgoingOptionsTable | not-accessible | mandatory | This group defines DNA call options for calls made from the interface. These options are not used for calls arriving to the interface represented by this DNA. |
| 1.3.6.1.4.1.562.36.2.1.71.2.11.1 | RowmscFrUniDnaOutgoingOptionsEntry | not-accessible | mandatory | An entry in the mscFrUniDnaOutgoingOptionsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.2.11.1.7 | ColumnmscFrUniDnaOutDefaultPriority | read-write | mandatory | This attribute indicates the default priority of outgoing calls from the DTE to the network. It can be overridden by the discardPriority under DLCI Direct Call… |
| 1.3.6.1.4.1.562.36.2.1.71.2.11.1.11 | ColumnmscFrUniDnaOutDefaultPathSensitivity | read-write | obsolete | This attribute specifies the default class of path sensitivity to network for all outgoing calls that use this DNA. The chosen default class of path sensitivit… |
| 1.3.6.1.4.1.562.36.2.1.71.2.11.1.12 | ColumnmscFrUniDnaOutPathSensitivityOverRide | read-write | obsolete | If this attribute is set to yes in the call request, the called end will use the calling end provisioning data on path sensitivity to override its own provisio… |
| 1.3.6.1.4.1.562.36.2.1.71.2.11.1.14 | ColumnmscFrUniDnaOutDefaultPathReliability | read-write | mandatory | This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) using this particular DNA. T… |
| 1.3.6.1.4.1.562.36.2.1.71.2.11.1.17 | ColumnmscFrUniDnaOutAccess | read-write | mandatory | This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that outgoing calls … |
| 1.3.6.1.4.1.562.36.2.1.71.2.11.1.18 | ColumnmscFrUniDnaDefaultTransferPriority | read-write | mandatory | This attribute specifies the default transfer priority for all outgoing calls using this particular DNA. It can be overridden by the transferPriority provision… |
| 1.3.6.1.4.1.562.36.2.1.71.2.11.1.19 | ColumnmscFrUniDnaTransferPriorityOverRide | read-write | mandatory | When this attribute is set to yes in the call request, the called end will use the calling end provisioning data on transfer priority to override its own provi… |
| 1.3.6.1.4.1.562.36.2.1.71.2.12 | TablemscFrUniDnaIncomingOptionsTable | not-accessible | mandatory | This group defines options for incoming calls. These options are used for calls arriving to the interface represented by this DNA. For calls originated from th… |
| 1.3.6.1.4.1.562.36.2.1.71.2.12.1 | RowmscFrUniDnaIncomingOptionsEntry | not-accessible | mandatory | An entry in the mscFrUniDnaIncomingOptionsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.2.12.1.9 | ColumnmscFrUniDnaIncAccess | read-write | mandatory | This attribute, if set to a value of allowed specifies that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permit… |
| 1.3.6.1.4.1.562.36.2.1.71.2.13 | TablemscFrUniDnaCallOptionsTable | not-accessible | mandatory | This group defines additional all options for not related to direction of the call. |
| 1.3.6.1.4.1.562.36.2.1.71.2.13.1 | RowmscFrUniDnaCallOptionsEntry | not-accessible | mandatory | An entry in the mscFrUniDnaCallOptionsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.2.13.1.10 | ColumnmscFrUniDnaAccountClass | read-write | mandatory | This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and r… |
| 1.3.6.1.4.1.562.36.2.1.71.2.13.1.11 | ColumnmscFrUniDnaAccountCollection | read-write | mandatory | This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the pa… |
| 1.3.6.1.4.1.562.36.2.1.71.2.13.1.12 | ColumnmscFrUniDnaServiceExchange | read-write | mandatory | This attribute is an arbitrary number, Data Service Exchange, as entered by the network operator and reported in accounting record. It is converted into an int… |
| 1.3.6.1.4.1.562.36.2.1.71.2.13.1.13 | ColumnmscFrUniDnaEgressAccounting | read-write | mandatory | This attribute specifies if egress accounting is enabled by the frame relay service. If egress accounting is disabled, only segment counts are collected by the… |
| 1.3.6.1.4.1.562.36.2.1.71.2.13.1.21 | ColumnmscFrUniDnaDataPath | read-write | mandatory | This attribute specifies the data path to be used by Virtual Circuits on this interface. If the connection has a DirectCall component then the value can be ove… |
| 1.3.6.1.4.1.562.36.2.1.71.3 | NodemscFrUniFramer | |||
| 1.3.6.1.4.1.562.36.2.1.71.3.1 | TablemscFrUniFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniFramer components. |
| 1.3.6.1.4.1.562.36.2.1.71.3.1.1 | RowmscFrUniFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniFramer component. |
| 1.3.6.1.4.1.562.36.2.1.71.3.1.1.1 | ColumnmscFrUniFramerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniFramer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.3.1.1.2 | ColumnmscFrUniFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.3.1.1.4 | ColumnmscFrUniFramerStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.71.3.1.1.10 | ColumnmscFrUniFramerIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.71.3.10 | TablemscFrUniFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.36.2.1.71.3.10.1 | RowmscFrUniFramerProvEntry | not-accessible | mandatory | An entry in the mscFrUniFramerProvTable. |
| 1.3.6.1.4.1.562.36.2.1.71.3.10.1.1 | ColumnmscFrUniFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.36.2.1.71.3.11 | TablemscFrUniFramerLinkTable | not-accessible | mandatory | This group contains attributes defining the framing of data on the link interface. |
| 1.3.6.1.4.1.562.36.2.1.71.3.11.1 | RowmscFrUniFramerLinkEntry | not-accessible | mandatory | An entry in the mscFrUniFramerLinkTable. |
| 1.3.6.1.4.1.562.36.2.1.71.3.11.1.2 | ColumnmscFrUniFramerDataInversion | read-write | mandatory | This attribute determines whether data bits are to be inverted (1 to 0 and 0 to 1) before transmission of frames to the interface. If the value of this attribu… |
| 1.3.6.1.4.1.562.36.2.1.71.3.11.1.3 | ColumnmscFrUniFramerFrameCrcType | read-write | mandatory | This attribute defines the type of CRC used. The CRC value calculated is appended to the end of the frames transmitted to the link. The CRC value is removed fr… |
| 1.3.6.1.4.1.562.36.2.1.71.3.11.1.4 | ColumnmscFrUniFramerFlagsBetweenFrames | read-write | mandatory | This attribute defines the number of flags that are inserted between frames sent to the link interface. |
| 1.3.6.1.4.1.562.36.2.1.71.3.12 | TablemscFrUniFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.71.3.12.1 | RowmscFrUniFramerStateEntry | not-accessible | mandatory | An entry in the mscFrUniFramerStateTable. |
| 1.3.6.1.4.1.562.36.2.1.71.3.12.1.1 | ColumnmscFrUniFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.71.3.12.1.2 | ColumnmscFrUniFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.71.3.12.1.3 | ColumnmscFrUniFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.71.3.13 | TablemscFrUniFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1 | RowmscFrUniFramerStatsEntry | not-accessible | mandatory | An entry in the mscFrUniFramerStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.1 | ColumnmscFrUniFramerFrmToIf | read-only | obsolete | The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, … |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.2 | ColumnmscFrUniFramerFrmFromIf | read-only | obsolete | The number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.3 | ColumnmscFrUniFramerOctetFromIf | read-only | obsolete | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.4 | ColumnmscFrUniFramerAborts | read-only | mandatory | This attribute is the total number of aborts received. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.5 | ColumnmscFrUniFramerCrcErrors | read-only | mandatory | This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.6 | ColumnmscFrUniFramerLrcErrors | read-only | mandatory | This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.7 | ColumnmscFrUniFramerNonOctetErrors | read-only | mandatory | This attribute is the total number of frames that were non octet aligned. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.8 | ColumnmscFrUniFramerOverruns | read-only | mandatory | This attribute is the total number of frames received from the link for which overruns occurred. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.9 | ColumnmscFrUniFramerUnderruns | read-only | mandatory | This attribute is the total number of frames transmitted to the link for which underruns occurred. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.10 | ColumnmscFrUniFramerLargeFrmErrors | read-only | mandatory | This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contain… |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.11 | ColumnmscFrUniFramerFrmModeErrors | read-only | mandatory | This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified f… |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.14 | ColumnmscFrUniFramerFrmToIf64 | read-only | mandatory | The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, … |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.15 | ColumnmscFrUniFramerFrmFromIf64 | read-only | mandatory | The number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.71.3.13.1.16 | ColumnmscFrUniFramerOctetFromIf64 | read-only | mandatory | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.71.3.14 | TablemscFrUniFramerUtilTable | not-accessible | mandatory | This group contains the link utilizaiton operational data for a Framer component. |
| 1.3.6.1.4.1.562.36.2.1.71.3.14.1 | RowmscFrUniFramerUtilEntry | not-accessible | mandatory | An entry in the mscFrUniFramerUtilTable. |
| 1.3.6.1.4.1.562.36.2.1.71.3.14.1.1 | ColumnmscFrUniFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwi… |
| 1.3.6.1.4.1.562.36.2.1.71.3.14.1.3 | ColumnmscFrUniFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available … |
| 1.3.6.1.4.1.562.36.2.1.71.4 | NodemscFrUniLmi | |||
| 1.3.6.1.4.1.562.36.2.1.71.4.1 | TablemscFrUniLmiRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniLmi components. |
| 1.3.6.1.4.1.562.36.2.1.71.4.1.1 | RowmscFrUniLmiRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniLmi component. |
| 1.3.6.1.4.1.562.36.2.1.71.4.1.1.1 | ColumnmscFrUniLmiRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscFrUniLmi components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.4.1.1.2 | ColumnmscFrUniLmiComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.4.1.1.4 | ColumnmscFrUniLmiStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniLmi tables. |
| 1.3.6.1.4.1.562.36.2.1.71.4.1.1.10 | ColumnmscFrUniLmiIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniLmi tables. |
| 1.3.6.1.4.1.562.36.2.1.71.4.10 | TablemscFrUniLmiParmsTable | not-accessible | mandatory | This group contains the provisionable attributes of the LMI component. |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1 | RowmscFrUniLmiParmsEntry | not-accessible | mandatory | An entry in the mscFrUniLmiParmsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.1 | ColumnmscFrUniLmiProcedures | read-write | mandatory | This attribute selects the procedures to be used for the Local Management Interface. The following procedures are supported: none: no Local Management Interfac… |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.2 | ColumnmscFrUniLmiAsyncStatusReport | read-write | mandatory | This attribute selects the use of asynchronous PVC status report procedures as specified in ANSI, CCITT, and Vendor Forum. This attribute can be set to on or o… |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.3 | ColumnmscFrUniLmiErrorEventThreshold | read-write | mandatory | An event is defined as follows: (1) receipt of a STATUS ENQUIRY message; or (2) expiration of timer T392. An error event is (1) nonreceipt of STATUS ENQUIRY in… |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.4 | ColumnmscFrUniLmiEventCount | read-write | mandatory | This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. This attribute corresponds to … |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.5 | ColumnmscFrUniLmiCheckPointTimer | read-write | mandatory | This attribute selects the time (in seconds) within which a STATUS ENQUIRY message is expected. This attribute corresponds to the nT2 parameter described in th… |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.6 | ColumnmscFrUniLmiMessageCountTimer | read-write | mandatory | This attribute selects the time (in seconds) within which at most five (this is a fixed value and corresponds to maximum message count in VendorForum) STATUS E… |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.7 | ColumnmscFrUniLmiIgnoreActiveBit | read-write | mandatory | This attribute specifies whether the Frame Relay LMI Active Bit (A-bit) has a bearing on the transfer of user data across this Frame Relay interface for both d… |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.8 | ColumnmscFrUniLmiSide | read-write | mandatory | This attribute can be set to user, network, or both. When this attribute is set to user, USP LMI procedures are running. When this attribute is set to network,… |
| 1.3.6.1.4.1.562.36.2.1.71.4.10.1.9 | ColumnmscFrUniLmiPvcConfigParmsInFsr | read-write | mandatory | When this attribute is set to yes, additional Q.933 information elements are included in the LMI Full Status message to facilitate CPE PVC parameter configurin… |
| 1.3.6.1.4.1.562.36.2.1.71.4.11 | TablemscFrUniLmiStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.71.4.11.1 | RowmscFrUniLmiStateEntry | not-accessible | mandatory | An entry in the mscFrUniLmiStateTable. |
| 1.3.6.1.4.1.562.36.2.1.71.4.11.1.1 | ColumnmscFrUniLmiAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.71.4.11.1.2 | ColumnmscFrUniLmiOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.71.4.11.1.3 | ColumnmscFrUniLmiUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.71.4.12 | TablemscFrUniLmiPsiTable | not-accessible | mandatory | This group provides the protocol status of the Local Management Interface. |
| 1.3.6.1.4.1.562.36.2.1.71.4.12.1 | RowmscFrUniLmiPsiEntry | not-accessible | mandatory | An entry in the mscFrUniLmiPsiTable. |
| 1.3.6.1.4.1.562.36.2.1.71.4.12.1.1 | ColumnmscFrUniLmiProtocolStatus | read-only | mandatory | This attribute indicates whether the LMI is in an error condition or whether the LMI procedures are behaving normally. When operating with no LMI protocol, thi… |
| 1.3.6.1.4.1.562.36.2.1.71.4.12.1.2 | ColumnmscFrUniLmiOpProcedures | read-only | mandatory | The opProcedures attribute indicates the procedures being used for the Local Management Interface. This attribute should be ignored if protocolStatus is not no… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13 | TablemscFrUniLmiStatsTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay Local Management Interface. |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1 | RowmscFrUniLmiStatsEntry | not-accessible | mandatory | An entry in the mscFrUniLmiStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.1 | ColumnmscFrUniLmiKeepAliveStatusToIf | read-only | mandatory | This attribute counts the number of Local Management Interface keep alive status messages sent to the external user device in response to a status enquiry for … |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.2 | ColumnmscFrUniLmiFullStatusToIf | read-only | mandatory | This attribute counts the number of Local Management Interface full status messages sent to the external user device in response to a status enquiry for keep a… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.3 | ColumnmscFrUniLmiKeepAliveStatusEnqFromIf | read-only | mandatory | This attribute counts the number of Local Management Interface valid keep alive status enquiry messages received from the external user device. When the maximu… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.4 | ColumnmscFrUniLmiFullStatusEnqFromIf | read-only | mandatory | This attribute counts the number of Local Management Interface valid full status enquiry messages received from the external user device. When the maximum coun… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.5 | ColumnmscFrUniLmiNetworkSideEventHistory | read-only | mandatory | This attribute displays the Local Management Interface network side procedure event history in order of occurrence. An event is represented by a single symbol.… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.6 | ColumnmscFrUniLmiProtocolErrors | read-only | mandatory | This attribute counts the number of Local Management Interface protocol errors. It is the sum of the sequence (sequenceErrors), timeout (pollingVerifTimeouts) … |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.7 | ColumnmscFrUniLmiUnexpectedIes | read-only | mandatory | This attribute counts the number of Local Management Interface frames received with an Information Element identifier that is unknown or unexpected. An unexpec… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.8 | ColumnmscFrUniLmiSequenceErrors | read-only | mandatory | This attribute counts the number of Local Management Interface Status Enquiry message sequence errors. A sequence error is receipt of a Status Enquiry message … |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.9 | ColumnmscFrUniLmiUnexpectedReports | read-only | mandatory | This attribute counts the number of Local Management Interface frames received with an unknown or unexpected report type. An unexpected report type is not a pr… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.10 | ColumnmscFrUniLmiPollingVerifTimeouts | read-only | mandatory | This attribute counts the number of checkPointTImer (t392) timer expiries occurring on the Local Management Interface. When the maximum count is reached the co… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.11 | ColumnmscFrUniLmiKeepAliveEnqToIf | read-only | mandatory | This attribute counts the number of Local Management Interface keep alive enquiry status messages sent to the external user device for keep alive status. When … |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.12 | ColumnmscFrUniLmiFullStatusEnqToIf | read-only | mandatory | This attribute counts the number of Local Management Interface full status messages sent to the external user device in response to a status enquiry for keep a… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.13 | ColumnmscFrUniLmiUserSideEventHistory | read-only | mandatory | This attribute displays the Local Management Interface user side procedure event history in order of occurrence. An event is represented by a single symbol. A … |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.14 | ColumnmscFrUniLmiStatusSequenceErrors | read-only | mandatory | This attribute counts the number of Local Management Interface Status message sequence errors. A sequence error is receipt of a Status message with a receive s… |
| 1.3.6.1.4.1.562.36.2.1.71.4.13.1.15 | ColumnmscFrUniLmiNoStatusReportCount | read-only | mandatory | This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented in t… |
| 1.3.6.1.4.1.562.36.2.1.71.4.14 | TablemscFrUniLmiUspParmsTable | not-accessible | mandatory | This group contains the provisionable attributes of the Local Management Interface user side procedure. |
| 1.3.6.1.4.1.562.36.2.1.71.4.14.1 | RowmscFrUniLmiUspParmsEntry | not-accessible | mandatory | An entry in the mscFrUniLmiUspParmsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.4.14.1.1 | ColumnmscFrUniLmiFullStatusPollingCycles | read-write | mandatory | This attribute specifies how frequently the Frame Relay UNI service should initiate a Status Enquiry for a full PVC status report. A polling cycle is a Status … |
| 1.3.6.1.4.1.562.36.2.1.71.4.14.1.2 | ColumnmscFrUniLmiLinkVerificationTimer | read-write | mandatory | This attribute specifies how frequently the Frame Relay UNI service should initiate a Status Enquiry for link integrity verification. It must be less than chec… |
| 1.3.6.1.4.1.562.36.2.1.71.5 | NodemscFrUniDlci | |||
| 1.3.6.1.4.1.562.36.2.1.71.5.1 | TablemscFrUniDlciRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDlci components. |
| 1.3.6.1.4.1.562.36.2.1.71.5.1.1 | RowmscFrUniDlciRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDlci component. |
| 1.3.6.1.4.1.562.36.2.1.71.5.1.1.1 | ColumnmscFrUniDlciRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDlci components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.5.1.1.2 | ColumnmscFrUniDlciComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.5.1.1.4 | ColumnmscFrUniDlciStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDlci tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.1.1.10 | ColumnmscFrUniDlciIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDlci tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2 | NodemscFrUniDlciDc | |||
| 1.3.6.1.4.1.562.36.2.1.71.5.2.1 | TablemscFrUniDlciDcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDlciDc components. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.1.1 | RowmscFrUniDlciDcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDlciDc component. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.1.1.1 | ColumnmscFrUniDlciDcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDlciDc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.1.1.2 | ColumnmscFrUniDlciDcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.1.1.4 | ColumnmscFrUniDlciDcStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDlciDc tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.1.1.10 | ColumnmscFrUniDlciDcIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDlciDc tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10 | TablemscFrUniDlciDcOptionsTable | not-accessible | mandatory | This group defines attributes associated with a direct call. It defines connection in terms of path and call option parameters. This connection can be permanen… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1 | RowmscFrUniDlciDcOptionsEntry | not-accessible | mandatory | An entry in the mscFrUniDlciDcOptionsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.3 | ColumnmscFrUniDlciDcRemoteNpi | read-write | mandatory | This attribute specifies the Numbering Plan Indicator (NPI) of the remoteDna. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.4 | ColumnmscFrUniDlciDcRemoteDna | read-write | mandatory | This attribute specifies the Data Network Address (DNA) of the service at the remote end of the DLCI. This is the called (destination) DCE address (DNA) of thi… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.5 | ColumnmscFrUniDlciDcRemoteDlci | read-write | mandatory | This attribute specifies the remote DLCI of the PVC connection. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.6 | ColumnmscFrUniDlciDcType | read-write | mandatory | This attribute specifies the type of VC call. If the value is set to permanentMaster, then a permanent connection will be established between two ends. The rem… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.9 | ColumnmscFrUniDlciDcTransferPriority | read-write | mandatory | This attribute specifies the transfer priority to the local network for the outgoing calls using this particular DLCI. It overrides the defaultTransferPriority… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.10 | ColumnmscFrUniDlciDcDiscardPriority | read-write | mandatory | This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning values: normal, high, and useDnaDe… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.11 | ColumnmscFrUniDlciDcDeDiscardPriority | read-write | mandatory | This attribute specifies whether the discardPriority applies to DE frames for this DLCI. When set to determinedByDiscardPriority, traffic with DE bit set will … |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.12 | ColumnmscFrUniDlciDcDataPath | read-write | mandatory | This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.13 | ColumnmscFrUniDlciDcCugIndex | read-write | mandatory | This attribute specifies the CUG index which is to be signalled in PVC and SPVC call requests to the remote end. The type of CUG signalling is defined in attri… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.14 | ColumnmscFrUniDlciDcCugType | read-write | mandatory | This attribute specifies the type of CUG signalling to be used in PVC and SPVC call requests. Index of CUG to be used is defined in attribute cugIndex in this … |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.15 | ColumnmscFrUniDlciDcMapIpCosToFrQos | read-write | mandatory | This attribute specifies whether an IP TOS value is mapped to an FR QOS. The mapping used is provisioned in the Mod Frs IpCosToFrQos component. When this attri… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.202 | TablemscFrUniDlciDcNfaTable | not-accessible | obsolete | This is the i'th National facility required for this direct call. Within the provisioning system, the user specifies the facility code along with the facility … |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.202.1 | RowmscFrUniDlciDcNfaEntry | not-accessible | obsolete | An entry in the mscFrUniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.202.1.1 | ColumnmscFrUniDlciDcNfaIndex | not-accessible | obsolete | This variable represents the index for the mscFrUniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.202.1.2 | ColumnmscFrUniDlciDcNfaValue | read-write | obsolete | This variable represents an individual value for the mscFrUniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.202.1.3 | ColumnmscFrUniDlciDcNfaRowStatus | write-only | obsolete | This variable is used to control the addition and deletion of individual values of the mscFrUniDlciDcNfaTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3 | NodemscFrUniDlciVc | |||
| 1.3.6.1.4.1.562.36.2.1.71.5.3.1 | TablemscFrUniDlciVcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDlciVc components. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.1.1 | RowmscFrUniDlciVcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDlciVc component. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.1.1.1 | ColumnmscFrUniDlciVcRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDlciVc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.1.1.2 | ColumnmscFrUniDlciVcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.1.1.4 | ColumnmscFrUniDlciVcStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDlciVc tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.1.1.10 | ColumnmscFrUniDlciVcIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDlciVc tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10 | TablemscFrUniDlciVcCadTable | not-accessible | mandatory | This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1 | RowmscFrUniDlciVcCadEntry | not-accessible | mandatory | An entry in the mscFrUniDlciVcCadTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.1 | ColumnmscFrUniDlciVcType | read-only | mandatory | This attribute displays the type of call, pvc,svc,spvc or frf10spvc. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.2 | ColumnmscFrUniDlciVcState | read-only | mandatory | This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very sho… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.3 | ColumnmscFrUniDlciVcPreviousState | read-only | mandatory | This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.4 | ColumnmscFrUniDlciVcDiagnosticCode | read-only | mandatory | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.5 | ColumnmscFrUniDlciVcPreviousDiagnosticCode | read-only | mandatory | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.6 | ColumnmscFrUniDlciVcCalledNpi | read-only | mandatory | This attribute displays the Numbering Plan Indicator (NPI) of the called end. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.7 | ColumnmscFrUniDlciVcCalledDna | read-only | mandatory | This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end wil… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.8 | ColumnmscFrUniDlciVcCalledLcn | read-only | mandatory | This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.9 | ColumnmscFrUniDlciVcCallingNpi | read-only | mandatory | This attribute displays the Numbering Plan Indicator (NPI) of the calling end. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.10 | ColumnmscFrUniDlciVcCallingDna | read-only | mandatory | This attribute displays the Data Network Address (Dna) of the calling end. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.11 | ColumnmscFrUniDlciVcCallingLcn | read-only | mandatory | This attribute displays the Logical Channel Number of the calling end. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.12 | ColumnmscFrUniDlciVcAccountingEnabled | read-only | mandatory | This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of … |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.13 | ColumnmscFrUniDlciVcFastSelectCall | read-only | mandatory | This attribute displays that this is a fast select call. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.19 | ColumnmscFrUniDlciVcPathReliability | read-only | mandatory | This attribute displays the path reliability. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.20 | ColumnmscFrUniDlciVcAccountingEnd | read-only | mandatory | This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.21 | ColumnmscFrUniDlciVcPriority | read-only | mandatory | This attribute displays whether the call is a normal or a high priority call. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.22 | ColumnmscFrUniDlciVcSegmentSize | read-only | mandatory | This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.27 | ColumnmscFrUniDlciVcMaxSubnetPktSize | read-only | mandatory | This attribute indicates the maximum packet size allowed on the Vc. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.28 | ColumnmscFrUniDlciVcRcosToNetwork | read-only | mandatory | This attribute indicates the routing metric routing class of service to the network. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.29 | ColumnmscFrUniDlciVcRcosFromNetwork | read-only | mandatory | This attribute displays the routing metric Routing Class of Service from the Network. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.30 | ColumnmscFrUniDlciVcEmissionPriorityToNetwork | read-only | mandatory | This attribute displays the network internal emission priotity to the network. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.31 | ColumnmscFrUniDlciVcEmissionPriorityFromNetwork | read-only | mandatory | This attribute displays the network internal emission priotity from the network. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.32 | ColumnmscFrUniDlciVcDataPath | read-only | mandatory | This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attri… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.11 | TablemscFrUniDlciVcIntdTable | not-accessible | mandatory | This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.11.1 | RowmscFrUniDlciVcIntdEntry | not-accessible | mandatory | An entry in the mscFrUniDlciVcIntdTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.1 | ColumnmscFrUniDlciVcCallReferenceNumber | read-only | obsolete | This attribute is obsolete. It is replaced by the callReferenceNumber attribute to display the call reference number in decimal. The SNMP reference for the cal… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.2 | ColumnmscFrUniDlciVcElapsedTimeTillNow | read-only | mandatory | This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.3 | ColumnmscFrUniDlciVcSegmentsRx | read-only | mandatory | This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.4 | ColumnmscFrUniDlciVcSegmentsSent | read-only | mandatory | This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. V… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.5 | ColumnmscFrUniDlciVcStartTime | read-only | mandatory | This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 ho… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.7 | ColumnmscFrUniDlciVcCallReferenceNumberDecimal | read-only | mandatory | This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval dat… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12 | TablemscFrUniDlciVcFrdTable | not-accessible | mandatory | This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand t… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1 | RowmscFrUniDlciVcFrdEntry | not-accessible | mandatory | An entry in the mscFrUniDlciVcFrdTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.2 | ColumnmscFrUniDlciVcFrmCongestedToSubnet | read-only | mandatory | This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be dis… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.3 | ColumnmscFrUniDlciVcCannotForwardToSubnet | read-only | mandatory | This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link disc… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.4 | ColumnmscFrUniDlciVcNotDataXferToSubnet | read-only | mandatory | This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.5 | ColumnmscFrUniDlciVcOutOfRangeFrmFromSubnet | read-only | mandatory | This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.6 | ColumnmscFrUniDlciVcCombErrorsFromSubnet | read-only | mandatory | This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs wh… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.7 | ColumnmscFrUniDlciVcDuplicatesFromSubnet | read-only | mandatory | This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.8 | ColumnmscFrUniDlciVcNotDataXferFromSubnet | read-only | mandatory | This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.9 | ColumnmscFrUniDlciVcFrmLossTimeouts | read-only | mandatory | This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.10 | ColumnmscFrUniDlciVcOoSeqByteCntExceeded | read-only | mandatory | This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if t… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.11 | ColumnmscFrUniDlciVcPeakOoSeqPktCount | read-only | mandatory | This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.12 | ColumnmscFrUniDlciVcPeakOoSeqFrmForwarded | read-only | mandatory | This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.13 | ColumnmscFrUniDlciVcSendSequenceNumber | read-only | mandatory | This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.15 | ColumnmscFrUniDlciVcPktRetryTimeouts | read-only | mandatory | This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.16 | ColumnmscFrUniDlciVcPeakRetryQueueSize | read-only | mandatory | This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.17 | ColumnmscFrUniDlciVcSubnetRecoveries | read-only | mandatory | This attribute displays the number of successful Vc recovery attempts. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.19 | ColumnmscFrUniDlciVcOoSeqPktCntExceeded | read-only | mandatory | This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.20 | ColumnmscFrUniDlciVcPeakOoSeqByteCount | read-only | mandatory | This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced q… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.417 | TablemscFrUniDlciVcDmepTable | not-accessible | mandatory | This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly da… |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.417.1 | RowmscFrUniDlciVcDmepEntry | not-accessible | mandatory | An entry in the mscFrUniDlciVcDmepTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.3.417.1.1 | ColumnmscFrUniDlciVcDmepValue | read-only | mandatory | This variable represents both the value and the index for the mscFrUniDlciVcDmepTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.4 | NodemscFrUniDlciSp | |||
| 1.3.6.1.4.1.562.36.2.1.71.5.4.1 | TablemscFrUniDlciSpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDlciSp components. |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.1.1 | RowmscFrUniDlciSpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDlciSp component. |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.1.1.1 | ColumnmscFrUniDlciSpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDlciSp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.1.1.2 | ColumnmscFrUniDlciSpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.1.1.4 | ColumnmscFrUniDlciSpStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDlciSp tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.1.1.10 | ColumnmscFrUniDlciSpIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDlciSp tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11 | TablemscFrUniDlciSpParmsTable | not-accessible | mandatory | This group contains the provisionable attributes for the Data Link Connection Identifier. These attributes reflect the service parameters specific to this inst… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1 | RowmscFrUniDlciSpParmsEntry | not-accessible | mandatory | An entry in the mscFrUniDlciSpParmsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.1 | ColumnmscFrUniDlciSpMaximumFrameSize | read-write | mandatory | This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.2 | ColumnmscFrUniDlciSpRateEnforcement | read-write | mandatory | This attribute specifies whether rate enforcement is in effect for this user Data Link Connection on this Frame Relay interface. Turning on rate enforcement me… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.3 | ColumnmscFrUniDlciSpCommittedInformationRate | read-write | mandatory | This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the netwo… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.4 | ColumnmscFrUniDlciSpCommittedBurstSize | read-write | mandatory | This attribute specifies the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measu… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.5 | ColumnmscFrUniDlciSpExcessBurstSize | read-write | mandatory | This attribute specifies the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement int… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.6 | ColumnmscFrUniDlciSpMeasurementInterval | read-write | mandatory | When cir and bc are zero and rateEnforcement is on, this attribute must be provisioned to specify the time interval (in milliseconds) over which rates and burs… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.7 | ColumnmscFrUniDlciSpRateAdaptation | read-write | mandatory | This attribute specifies whether rate adaptation is in effect for this user Data Link Connection on this Frame Relay interface. Rate adaptation is a feature th… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.8 | ColumnmscFrUniDlciSpAccounting | read-write | mandatory | This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generati… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.9 | ColumnmscFrUniDlciSpRaSensitivity | read-write | mandatory | This attribute specifies the sensitivity of the rate adaptation system. A higher number indicates a higher sensitivity and therefore a quicker reaction time to… |
| 1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.10 | ColumnmscFrUniDlciSpUpdateBCI | read-write | mandatory | This attribute specifies whether internal Backward Congestion Indication (BCI) bits will report congestion external to the Passport network, as communicated th… |
| 1.3.6.1.4.1.562.36.2.1.71.5.5 | NodemscFrUniDlciLb | |||
| 1.3.6.1.4.1.562.36.2.1.71.5.5.1 | TablemscFrUniDlciLbRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDlciLb components. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.1.1 | RowmscFrUniDlciLbRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDlciLb component. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.1.1.1 | ColumnmscFrUniDlciLbRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDlciLb components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.1.1.2 | ColumnmscFrUniDlciLbComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.1.1.4 | ColumnmscFrUniDlciLbStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDlciLb tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.1.1.10 | ColumnmscFrUniDlciLbIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDlciLb tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10 | TablemscFrUniDlciLbStatsTable | not-accessible | mandatory | This group contains all the statistics for the data loopback tool. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1 | RowmscFrUniDlciLbStatsEntry | not-accessible | mandatory | An entry in the mscFrUniDlciLbStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.1 | ColumnmscFrUniDlciLbLocalTotalFrm | read-only | mandatory | This attribute records the number of frames looped back to the link since loopback was last started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.2 | ColumnmscFrUniDlciLbLocalTotalBytes | read-only | mandatory | This attribute records the number of bytes looped back to the link since loopback mode was started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.3 | ColumnmscFrUniDlciLbLocalFecnFrm | read-only | mandatory | This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the link since the loopback mode w… |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.4 | ColumnmscFrUniDlciLbLocalBecnFrm | read-only | mandatory | This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the link since the loopback mode … |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.5 | ColumnmscFrUniDlciLbLocalDeFrm | read-only | mandatory | This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.6 | ColumnmscFrUniDlciLbLocalDeBytes | read-only | mandatory | This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.7 | ColumnmscFrUniDlciLbRemoteTotalFrm | read-only | mandatory | This attribute records the number of frames looped back to the subnet since loopback was last started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.8 | ColumnmscFrUniDlciLbRemoteTotalBytes | read-only | mandatory | This attribute records the number of bytes looped back to the subnet since loopback was last started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.9 | ColumnmscFrUniDlciLbRemoteFecnFrm | read-only | mandatory | This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the subnet since the loopback mode… |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.10 | ColumnmscFrUniDlciLbRemoteBecnFrm | read-only | mandatory | This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the subnet since the loopback mod… |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.13 | ColumnmscFrUniDlciLbRemoteDeFrm | read-only | mandatory | This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.14 | ColumnmscFrUniDlciLbRemoteDeBytes | read-only | mandatory | This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.6 | NodemscFrUniDlciEgressSp | |||
| 1.3.6.1.4.1.562.36.2.1.71.5.6.1 | TablemscFrUniDlciEgressSpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniDlciEgressSp components. |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.1.1 | RowmscFrUniDlciEgressSpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniDlciEgressSp component. |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.1.1.1 | ColumnmscFrUniDlciEgressSpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscFrUniDlciEgressSp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.1.1.2 | ColumnmscFrUniDlciEgressSpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.1.1.4 | ColumnmscFrUniDlciEgressSpStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniDlciEgressSp tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.1.1.10 | ColumnmscFrUniDlciEgressSpIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniDlciEgressSp tables. |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.10 | TablemscFrUniDlciEgressSpProvTable | not-accessible | mandatory | This group contains the provisionable attributes for this component. |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.10.1 | RowmscFrUniDlciEgressSpProvEntry | not-accessible | mandatory | An entry in the mscFrUniDlciEgressSpProvTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.10.1.1 | ColumnmscFrUniDlciEgressSpCommittedInformationRate | read-write | mandatory | This attribute specifies the committed information rate (CIR) for the egress direction. It is used for Call Admission Control (CAC) at the egress link. If the … |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.10.1.2 | ColumnmscFrUniDlciEgressSpCommittedBurstSize | read-write | mandatory | This attribute specifies the committed burst size (Bc) for the egress direction. It is used for performing Call Admission Control (CAC) at the egress link. If … |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.10.1.3 | ColumnmscFrUniDlciEgressSpExcessBurstSize | read-write | mandatory | This attribute specifies the excess burst size (Be) for the egress direction. It is used for Call Admission Control (CAC) function towards the egress link. If … |
| 1.3.6.1.4.1.562.36.2.1.71.5.6.10.1.4 | ColumnmscFrUniDlciEgressSpMeasurementInterval | read-write | mandatory | This attribute specifies the time interval over which rates and burst sizes are measured in the egress direction. It is used for bandwidth reservation for Call… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10 | TablemscFrUniDlciStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1 | RowmscFrUniDlciStateEntry | not-accessible | mandatory | An entry in the mscFrUniDlciStateTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.1 | ColumnmscFrUniDlciAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.2 | ColumnmscFrUniDlciOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.3 | ColumnmscFrUniDlciUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.4 | ColumnmscFrUniDlciAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.5 | ColumnmscFrUniDlciProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.6 | ColumnmscFrUniDlciControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.7 | ColumnmscFrUniDlciAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.8 | ColumnmscFrUniDlciStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.71.5.10.1.9 | ColumnmscFrUniDlciUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.71.5.12 | TablemscFrUniDlciAbitTable | not-accessible | mandatory | This group contains the A-Bit status information for this Data Link Connection Identifier. |
| 1.3.6.1.4.1.562.36.2.1.71.5.12.1 | RowmscFrUniDlciAbitEntry | not-accessible | mandatory | An entry in the mscFrUniDlciAbitTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.12.1.1 | ColumnmscFrUniDlciABitStatusToIf | read-only | mandatory | This attribute is the most recent A-bit status sent to the interface. The A-bit status is part of the LMI protocol, and indicates willingness to accept data fr… |
| 1.3.6.1.4.1.562.36.2.1.71.5.12.1.2 | ColumnmscFrUniDlciABitReasonToIf | read-only | mandatory | This attribute provides the reason (if any) for an inactive status to be sent to the interface. This reason is notApplicable for an active status. |
| 1.3.6.1.4.1.562.36.2.1.71.5.12.1.3 | ColumnmscFrUniDlciABitStatusFromIf | read-only | mandatory | This attribute is the most recent A-Bit status received from the interface. inactive - the Frame Relay service informs the remote DLCI not to send user data to… |
| 1.3.6.1.4.1.562.36.2.1.71.5.12.1.4 | ColumnmscFrUniDlciABitReasonFromIf | read-only | mandatory | This attribute provides the reason (if any) for an inactive status to be sent to the subnet. This reason is notApplicable for an active status. |
| 1.3.6.1.4.1.562.36.2.1.71.5.12.1.5 | ColumnmscFrUniDlciLoopbackState | read-only | mandatory | This attribute has the value on when the DLCI is in loopback mode and off otherwise. The loopback command verbs start and stop are used to initiate and termina… |
| 1.3.6.1.4.1.562.36.2.1.71.5.13 | TablemscFrUniDlciCalldTable | not-accessible | mandatory | This group of attributes describes the characteristics of the call such as call type and call state. |
| 1.3.6.1.4.1.562.36.2.1.71.5.13.1 | RowmscFrUniDlciCalldEntry | not-accessible | mandatory | An entry in the mscFrUniDlciCalldTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.13.1.1 | ColumnmscFrUniDlciCallType | read-only | mandatory | This attribute indicates whether this DLCI is a permancent virtual circuit (PVC), a switched virtual circuit (SVC) or a switched permament virtual circuit (SPV… |
| 1.3.6.1.4.1.562.36.2.1.71.5.13.1.2 | ColumnmscFrUniDlciQstate | read-only | mandatory | This attribute indicates the FRF.4 state of an SVC call. The value of this attribute for a permanent (PVC and P-SPVC) DLCI is always notApplicable. In the desc… |
| 1.3.6.1.4.1.562.36.2.1.71.5.13.1.3 | ColumnmscFrUniDlciCallref | read-only | mandatory | This attribute indicates the FRF.4 call reference number associated with this DLCI. The value of this attribute for a provisioned (PVC or P-SPVC) DLCI is alway… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14 | TablemscFrUniDlciSpOpTable | not-accessible | mandatory | This group defines the service and traffic parameters specific to this instance of DLCI. For permanent (PVC and P-SPVC) DLCIs, the values of attributes with th… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1 | RowmscFrUniDlciSpOpEntry | not-accessible | mandatory | An entry in the mscFrUniDlciSpOpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.1 | ColumnmscFrUniDlciMaximumFrameSize | read-only | mandatory | This attribute indicates the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.2 | ColumnmscFrUniDlciRateEnforcement | read-only | obsolete | This attribute is obsolete. It provided the information which is now represented by the provisionable attribute rateEnforcement under the ServiceParameters com… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.3 | ColumnmscFrUniDlciCommittedInformationRate | read-only | mandatory | This attribute indicates the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the netwo… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.4 | ColumnmscFrUniDlciCommittedBurstSize | read-only | mandatory | This attribute indicates the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measu… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.5 | ColumnmscFrUniDlciExcessBurstSize | read-only | mandatory | This attribute indicates the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement int… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.6 | ColumnmscFrUniDlciMeasurementInterval | read-only | mandatory | This attribute indicates the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute should be ignored when rateEnforceme… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.7 | ColumnmscFrUniDlciRateAdaptation | read-only | obsolete | This attribute is obsolete. It provided the information which is now represented by the provisionable attribute rateAdaptation under the ServiceParameters comp… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.8 | ColumnmscFrUniDlciAccounting | read-only | mandatory | This attribute indicates whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generati… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.9 | ColumnmscFrUniDlciEmissionPriorityToIf | read-only | mandatory | This attribute indicates the emission priority of frames sent to the interface. A larger value denotes a higher priority. |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.10 | ColumnmscFrUniDlciTransferPriToNwk | read-only | mandatory | This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configured for an application accordin… |
| 1.3.6.1.4.1.562.36.2.1.71.5.14.1.11 | ColumnmscFrUniDlciTransferPriFromNwk | read-only | mandatory | This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference configured for an application accord… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15 | TablemscFrUniDlciStatsTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay Data Link Connection Identifier. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1 | RowmscFrUniDlciStatsEntry | not-accessible | mandatory | An entry in the mscFrUniDlciStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.1 | ColumnmscFrUniDlciFrmToIf | read-only | mandatory | This attribute counts the frames sent out the interface. When the maximum count is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.2 | ColumnmscFrUniDlciFecnFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wrap… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.3 | ColumnmscFrUniDlciBecnFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wra… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.4 | ColumnmscFrUniDlciBciToSubnet | read-only | mandatory | This attribute counts the frames sent into the local network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to … |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.5 | ColumnmscFrUniDlciDeFrmToIf | read-only | mandatory | This attribute counts the frames sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.6 | ColumnmscFrUniDlciDiscCongestedToIf | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the interface. When this count re… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.7 | ColumnmscFrUniDlciDiscDeCongestedToIf | read-only | mandatory | This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion in the dir… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.8 | ColumnmscFrUniDlciFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface. It includes the frames that are discarded due to error or excess. When the maximum count is reach… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.9 | ColumnmscFrUniDlciFecnFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum i… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.10 | ColumnmscFrUniDlciBecnFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum … |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.11 | ColumnmscFrUniDlciFciFromSubnet | read-only | mandatory | This attribute counts the frames received from the network with the Forward Congestion Indication (FCI) bit set. When the count reaches maximum it wraps to zer… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.12 | ColumnmscFrUniDlciBciFromSubnet | read-only | mandatory | This attribute counts the frames received from the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to ze… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.13 | ColumnmscFrUniDlciDeFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.14 | ColumnmscFrUniDlciExcessFrmFromIf | read-only | mandatory | This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enfor… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.15 | ColumnmscFrUniDlciDiscExcessFromIf | read-only | mandatory | This attribute counts the frames which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.16 | ColumnmscFrUniDlciDiscFrameAbit | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay Service, due to an inactive PVC status, in the direction toward the local network. When t… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.17 | ColumnmscFrUniDlciDiscCongestedFromIf | read-only | mandatory | This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the network. When this count reac… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.18 | ColumnmscFrUniDlciDiscDeCongestedFromIf | read-only | mandatory | This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion, in the di… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.19 | ColumnmscFrUniDlciErrorShortFrmFromIf | read-only | mandatory | This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.20 | ColumnmscFrUniDlciErrorLongFrmFromIf | read-only | mandatory | This attribute counts the frames received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.21 | ColumnmscFrUniDlciBecnFrmSetByService | read-only | mandatory | This attribute counts the number of frames with BECN set by the Frame Relay service. It is incremented whenever the Frame Relay service sets BECN on a frame up… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.22 | ColumnmscFrUniDlciBytesToIf | read-only | mandatory | This attribute counts the bytes sent out the interface. When the maximum count is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.23 | ColumnmscFrUniDlciDeBytesToIf | read-only | mandatory | This attribute counts the bytes sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.24 | ColumnmscFrUniDlciDiscCongestedToIfBytes | read-only | mandatory | This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the link. When this count reaches … |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.25 | ColumnmscFrUniDlciDiscDeCongestedToIfBytes | read-only | mandatory | This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the link. … |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.26 | ColumnmscFrUniDlciBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface. Bytes that are discarded due to error or excess are not counted. When the maximum count is reached… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.27 | ColumnmscFrUniDlciDeBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.28 | ColumnmscFrUniDlciExcessBytesFromIf | read-only | mandatory | This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforc… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.29 | ColumnmscFrUniDlciDiscExcessFromIfBytes | read-only | mandatory | This attribute counts the bytes which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.30 | ColumnmscFrUniDlciDiscByteAbit | read-only | mandatory | This attribute counts the bytes which were discarded due to aBit turned off. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.31 | ColumnmscFrUniDlciDiscCongestedFromIfBytes | read-only | mandatory | This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the network. When this count reach… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.32 | ColumnmscFrUniDlciDiscDeCongestedFromIfBytes | read-only | mandatory | This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the networ… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.33 | ColumnmscFrUniDlciErrorShortBytesFromIf | read-only | mandatory | This attribute counts the bytes received with 0 octets in the information field. When the count reaches maximum it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.34 | ColumnmscFrUniDlciErrorLongBytesFromIf | read-only | mandatory | This attribute counts the bytes received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it … |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.35 | ColumnmscFrUniDlciRateAdaptReduct | read-only | mandatory | This attribute counts the number of rate reductions due to rate adaptation. Rate adaptation causes the allowed rate to be reduced in steps. After each reductio… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.36 | ColumnmscFrUniDlciRateAdaptReductPeriod | read-only | mandatory | This attribute provides a cumulative count of the amount of time that rate adaptation procedures have been in effect. When this count reaches maximum, it wraps… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.37 | ColumnmscFrUniDlciTransferPriorityToNetwork | read-only | obsolete | This attribute is obsolete. It is replaced by attribute transferPriorityToNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.38 | ColumnmscFrUniDlciTransferPriorityFromNetwork | read-only | obsolete | This attribute is obsolete. It is replaced by attribute transferPriorityFromNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp. |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.39 | ColumnmscFrUniDlciCirPresent | read-only | mandatory | This attribute provides the actual Committed Information Rate (CIR) enforced for this DLCI. This number is in units of 800 bits/ sec, since that is the interna… |
| 1.3.6.1.4.1.562.36.2.1.71.5.15.1.40 | ColumnmscFrUniDlciEirPresent | read-only | mandatory | This attribute provides the actual Excess Information Rate (EIR) enforced for this DLCI. This number is in units of 800 bits/sec, since that is the internal re… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16 | TablemscFrUniDlciIntTable | not-accessible | mandatory | This group contains the operational statistics for the Frame Relay Data Link Connection Identifier interval data (accounting data). |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1 | RowmscFrUniDlciIntEntry | not-accessible | mandatory | An entry in the mscFrUniDlciIntTable. |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.1 | ColumnmscFrUniDlciStartTime | read-only | mandatory | This attribute indicates the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 h… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.2 | ColumnmscFrUniDlciTotalIngressBytes | read-only | mandatory | This attribute counts the total bytes received from the interface since the start of the interval period. The start of the interval period is captured in the s… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.3 | ColumnmscFrUniDlciTotalEgressBytes | read-only | mandatory | This attribute counts the total bytes sent to the interface since the start of the interval period. The start of the interval period is captured in the startTi… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.4 | ColumnmscFrUniDlciEirIngressBytes | read-only | mandatory | This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the int… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.5 | ColumnmscFrUniDlciEirEgressBytes | read-only | mandatory | This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the … |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.6 | ColumnmscFrUniDlciDiscardedBytes | read-only | mandatory | This attribute counts the total bytes in invalid frames received from the interface and discarded at the DLCI since the start of the interval period. This coun… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.7 | ColumnmscFrUniDlciTotalIngressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames received from the … |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.8 | ColumnmscFrUniDlciTotalEgressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames sent to the interf… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.9 | ColumnmscFrUniDlciEirIngressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibi… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.10 | ColumnmscFrUniDlciEirEgressSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibi… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.11 | ColumnmscFrUniDlciDiscardedSegFrm | read-only | mandatory | If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in invalid frames received from th… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.12 | ColumnmscFrUniDlciCirPresentObs | read-only | obsolete | This attribute has moved to the statistics subgroup. See cirPresent.. |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.13 | ColumnmscFrUniDlciEirPresentObs | read-only | obsolete | This attribute has moved to the statistics subgroup. See eirPresent. |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.14 | ColumnmscFrUniDlciRateEnforcementPresent | read-only | obsolete | This attribute is obsolete. See the provisionable rateEnforcement attribute. |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.15 | ColumnmscFrUniDlciRateAdaptationPresent | read-only | obsolete | This attribute is obsolete. See the provisionable rateAdaptation attribute. |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.16 | ColumnmscFrUniDlciLocalRateAdaptOccurred | read-only | mandatory | This attribute indicates whether rate adaptation has occurred on this user Data Link Connection on this Frame Relay interface. The value is reset to no when an… |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.17 | ColumnmscFrUniDlciCallReferenceNumber | read-only | obsolete | This attribute is obsoleted and replaced by callRefNumber. |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.18 | ColumnmscFrUniDlciElapsedDifference | read-only | mandatory | This attribute indicates the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since the call started. |
| 1.3.6.1.4.1.562.36.2.1.71.5.16.1.20 | ColumnmscFrUniDlciCallRefNumber | read-only | mandatory | This attribute indicates the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval da… |
| 1.3.6.1.4.1.562.36.2.1.71.6 | NodemscFrUniSig | |||
| 1.3.6.1.4.1.562.36.2.1.71.6.1 | TablemscFrUniSigRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniSig components. |
| 1.3.6.1.4.1.562.36.2.1.71.6.1.1 | RowmscFrUniSigRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniSig component. |
| 1.3.6.1.4.1.562.36.2.1.71.6.1.1.1 | ColumnmscFrUniSigRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniSig components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.6.1.1.2 | ColumnmscFrUniSigComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.6.1.1.4 | ColumnmscFrUniSigStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniSig tables. |
| 1.3.6.1.4.1.562.36.2.1.71.6.1.1.10 | ColumnmscFrUniSigIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniSig tables. |
| 1.3.6.1.4.1.562.36.2.1.71.6.11 | TablemscFrUniSigRangeTable | not-accessible | mandatory | This group contains the provisionable attribute to define the range of DLCIs for PVCs and SVCs. The purpose of this range is to prevent DLCI collisions between… |
| 1.3.6.1.4.1.562.36.2.1.71.6.11.1 | RowmscFrUniSigRangeEntry | not-accessible | mandatory | An entry in the mscFrUniSigRangeTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.11.1.1 | ColumnmscFrUniSigHighestPvcDlci | read-write | obsolete | This attribute specifies the highest DLCI value that can be provisioned for a PVC. It partitions the DLCI space into PVC and SVC. PVC DLCI numbers higher than … |
| 1.3.6.1.4.1.562.36.2.1.71.6.11.1.4 | ColumnmscFrUniSigHighestPermanentDlci | read-write | obsolete | This attribute specifies the highest DLCI value that can be provisioned for a permanent connection. It partitions the DLCI space into permanent and switched co… |
| 1.3.6.1.4.1.562.36.2.1.71.6.11.1.5 | ColumnmscFrUniSigHighestFriPvcDlci | read-write | mandatory | This attribute specifies the highest DLCI value that can be provisioned for a permanent connection. It partitions the DLCI space into permanent and switched co… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12 | TablemscFrUniSigServParmsTable | not-accessible | mandatory | This group contains the provisionable FRF.4 service parameters. |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1 | RowmscFrUniSigServParmsEntry | not-accessible | mandatory | An entry in the mscFrUniSigServParmsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.1 | ColumnmscFrUniSigMaximumAggregateSvcCir | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction CIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.2 | ColumnmscFrUniSigMaximumAggregateSvcEir | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction EIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.3 | ColumnmscFrUniSigMaximumFrameSize | read-write | mandatory | This attribute specifies the maximum number of octets that may be included in the information field of the user DLCI of any switched connections using this int… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.4 | ColumnmscFrUniSigDefaultMaximumFrameSize | read-write | mandatory | This attribute specifies the default maximum number of octets that may be included in the information field of the user DLCI assigned for any switched connecti… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.5 | ColumnmscFrUniSigDefaultCommittedInformationRate | read-write | mandatory | This attribute specifies the default user to network direction CIR. This value is used during call parameter negotiation for switched calls on this interface w… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.6 | ColumnmscFrUniSigDefaultCommittedBurstSize | read-write | mandatory | This attribute specifies the default user to network direction Bc. This value is used during call parameter negotiation for switched calls on this interface wh… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.7 | ColumnmscFrUniSigDefaultExcessBurstSize | read-write | mandatory | This attribute specifies the default user to network direction Be. This value is used during call parameter negotiation for switched calls on this interface wh… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.8 | ColumnmscFrUniSigUnlimitedAggregateEir | read-write | obsolete | This attribute specifies whether the network will enforce aggregate EIR during SVC call establishment. The network keeps track of the sum of user to network EI… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.9 | ColumnmscFrUniSigRateEnforcement | read-write | mandatory | This attribute specifies whether rate enforcement is in effect for SVCs on this interface. |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.10 | ColumnmscFrUniSigRateAdaptation | read-write | mandatory | This attribute specifies whether closed-loop rate adaptation is in effect for SVCs on this interface. Rate adaptation is a feature that, in periods of congesti… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.11 | ColumnmscFrUniSigMaximumAggregateSvcCirNormalQ | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction CIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.12 | ColumnmscFrUniSigMaximumAggregateSvcCirHighQ | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction CIR allowed for SVCs on the interface. It is provisioned as a percentage of the link a… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.13 | ColumnmscFrUniSigMaximumAggregateSvcCirInterruptQ | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction CIR allowed for SVCs on the interface. It is provisioned as a percentage of the link a… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.14 | ColumnmscFrUniSigMaximumAggregateSvcEirNormalQ | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction EIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.15 | ColumnmscFrUniSigMaximumAggregateSvcEirHighQ | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction EIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.16 | ColumnmscFrUniSigMaximumAggregateSvcEirInterruptQ | read-write | obsolete | This attribute specifies the maximum aggregate user to network direction EIR allowed for SVCs on the interface. It is provisioned as a percentage of the access… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.17 | ColumnmscFrUniSigX213IeHandling | read-write | mandatory | The x213IeHandling attribute specifies how Frame Relay handles the X.213 Priority IE when it is in the FRF.4 setup message. When the attribute is set to notSup… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.18 | ColumnmscFrUniSigRaSensitivity | read-write | mandatory | This attribute specifies the sensitivity of the rate adaptation system for all switched connections on this interface. A higher number indicates a higher sensi… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.19 | ColumnmscFrUniSigUpdateBCI | read-write | mandatory | This attribute specifies whether internal Backward Congestion Indication (BCI) bits will report congestion external to the Passport network, as communicated th… |
| 1.3.6.1.4.1.562.36.2.1.71.6.12.1.20 | ColumnmscFrUniSigDefaultLocCheck | read-write | mandatory | This attribute specifies whether Passport needs to check the location of Cause IE in a Release or a Disc message issued by local DTE. If this bit is set to on,… |
| 1.3.6.1.4.1.562.36.2.1.71.6.13 | TablemscFrUniSigSysParmsTable | not-accessible | mandatory | This group contains the provisionable FRF.4 system parameters. |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1 | RowmscFrUniSigSysParmsEntry | not-accessible | mandatory | An entry in the mscFrUniSigSysParmsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1.1 | ColumnmscFrUniSigCallSetupTimer | read-write | mandatory | This attribute specifies the time the network waits for a response to the SETUP message sent to the called user. Upon timer expiry, the SETUP message is retran… |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1.2 | ColumnmscFrUniSigDisconnectTimer | read-write | mandatory | This attribute specifies the time the network waits for a response to the DISCONNECT message sent to the user. Upon timer expiry, the RELEASE message is sent. |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1.3 | ColumnmscFrUniSigReleaseTimer | read-write | mandatory | This attribute specifies the time the network waits for a response to the RELEASE message sent to the user. Upon timer expiry, the RELEASE message is retransmi… |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1.4 | ColumnmscFrUniSigCallProceedingTimer | read-write | mandatory | This attribute specifies the time the network waits for the CONNECT message from the called user after the network has received the optional CALL PROCEEDING me… |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1.5 | ColumnmscFrUniSigNetworkType | read-write | mandatory | This attribute specifies whether this Frame Relay service is running on a public or a private network. This value is used solely in populating applicable infor… |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1.6 | ColumnmscFrUniSigRestartReqTimer | read-write | mandatory | This attribute specifies the time the network waits for the RESTART ACKNOWLEDGE message from the adjacent network after sending a first RESTART message. Upon t… |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1.7 | ColumnmscFrUniSigRestartRcvTimer | read-write | mandatory | This attribute specifies the time the local network waits for the processing of a RESTART message received by the interface. Upon expiry of this timer, an alar… |
| 1.3.6.1.4.1.562.36.2.1.71.6.13.1.8 | ColumnmscFrUniSigStatusEnqTimer | read-write | mandatory | This attribute specifies the time the network waits for the requested STATUS message from the adjacent network. Upon expiry of this timer, another STATUS ENQUI… |
| 1.3.6.1.4.1.562.36.2.1.71.6.14 | TablemscFrUniSigLapfSysTable | not-accessible | mandatory | This group contains the provisionable attributes for the SVC data link layer. The data link layer is governed primarily through ITU specification Q.922, and op… |
| 1.3.6.1.4.1.562.36.2.1.71.6.14.1 | RowmscFrUniSigLapfSysEntry | not-accessible | mandatory | An entry in the mscFrUniSigLapfSysTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.14.1.2 | ColumnmscFrUniSigWindowSize | read-write | mandatory | This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at an… |
| 1.3.6.1.4.1.562.36.2.1.71.6.14.1.3 | ColumnmscFrUniSigRetransmitLimit | read-write | mandatory | This attribute specifies the number of times a frame can be retransmitted by the SVC data link layer before appropriate recovery action is taken. |
| 1.3.6.1.4.1.562.36.2.1.71.6.14.1.4 | ColumnmscFrUniSigAckTimer | read-write | mandatory | This attribute specifies how long the layer 2 protocol waits for an acknowledgment to a sent frame. The value set for ackTimer must be less than the value set … |
| 1.3.6.1.4.1.562.36.2.1.71.6.14.1.5 | ColumnmscFrUniSigAckDelayTimer | read-write | mandatory | This attribute specifies how long the network waits before sending an acknowledgment for a received in-sequence I-frame. A value of 0 means that every frame is… |
| 1.3.6.1.4.1.562.36.2.1.71.6.14.1.6 | ColumnmscFrUniSigIdleProbeTimer | read-write | mandatory | This attribute specifies how long the link is permitted to remain idle (that is, no frames are exchanged on the data link). Upon expiry of this timer, the netw… |
| 1.3.6.1.4.1.562.36.2.1.71.6.15 | TablemscFrUniSigStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.71.6.15.1 | RowmscFrUniSigStateEntry | not-accessible | mandatory | An entry in the mscFrUniSigStateTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.15.1.1 | ColumnmscFrUniSigAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.71.6.15.1.2 | ColumnmscFrUniSigOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.71.6.15.1.3 | ColumnmscFrUniSigUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.71.6.16 | TablemscFrUniSigStatsTable | not-accessible | mandatory | This group contains the statistics related to the SVC signaling layer at the interface level. |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1 | RowmscFrUniSigStatsEntry | not-accessible | mandatory | An entry in the mscFrUniSigStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.1 | ColumnmscFrUniSigCurrentNumberOfSvcCalls | read-only | mandatory | This attribute indicates the number of Frame Relay SVCs currently existing on this interface. |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.4 | ColumnmscFrUniSigInCalls | read-only | mandatory | This attribute indicates the current number of incoming SVCs on this interface (that is, the number of SVCs for which this interface represents the destination… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.5 | ColumnmscFrUniSigInCallsRefused | read-only | mandatory | This attribute counts the incoming SVC call requests that are rejected by either this interface or by the called user. When this count exceeds the maximum, it … |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.6 | ColumnmscFrUniSigOutCalls | read-only | mandatory | This attribute indicates the current number of outgoing SVCs on this interface (that is, the number of SVCs for which this interface represents the source end … |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.7 | ColumnmscFrUniSigOutCallsFailed | read-only | mandatory | This attribute counts the outgoing SVC call requests that are rejected by either this interface, or by the network side of the destination end, or by the calle… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.8 | ColumnmscFrUniSigProtocolErrors | read-only | mandatory | This attribute counts the number of times a FRF.4 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-sig… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.9 | ColumnmscFrUniSigQualityOfServiceNotAvailable | read-only | mandatory | This attribute counts the number of incoming and outgoing SVCs that are rejected because the quality of service requested cannot be met by the network. When th… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.10 | ColumnmscFrUniSigSetupTimeout | read-only | mandatory | This attribute counts the number of times the T303 setup timer has expired. When this count reaches maximum, it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.11 | ColumnmscFrUniSigLastCauseInStatusMsgReceived | read-only | mandatory | This attribute indicates the cause value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is speci… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.12 | ColumnmscFrUniSigLastStateInStatusMsgReceived | read-only | mandatory | This attribute indicates the state value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is speci… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.13 | ColumnmscFrUniSigLastDlciReceivedStatus | read-only | mandatory | This attribute shows the value of the DLCI that has most recently received a STATUS message from the user. The initial value of this attribute is 0. |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.14 | ColumnmscFrUniSigLastStateReceivedStatus | read-only | obsolete | This attribute shows the network FRF.4 state of the DLCI that has most recently received a STATUS message from the user. The DLCI to which this STATUS message … |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.15 | ColumnmscFrUniSigLastTimeMsgBlockCongested | read-only | obsolete | This attribute displays the most recent time that an SVC DLCI has failed to get a message block due to message block congestion. Exceptional behavior can occur… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.16 | ColumnmscFrUniSigLastDlciWithMsgBlockCongestion | read-only | obsolete | This attribute shows the value of the DLCI that has most recently failed to get a message block due to message block congestion. The initial value of this attr… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.17 | ColumnmscFrUniSigCurrentAggregateSvcCirNormalQ | read-only | obsolete | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through normal priority queue) assigned to existing SVCs on the interface. Th… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.18 | ColumnmscFrUniSigCurrentAggregateSvcCirHighQ | read-only | obsolete | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through high priority queue) assigned to existing SVCs on the interface. The … |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.19 | ColumnmscFrUniSigCurrentAggregateSvcCirInterruptQ | read-only | obsolete | This attribute shows the aggregate SVC CIR (for traffic transiting in the network through interrupting queue) assigned to existing SVCs on the interface. The v… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.20 | ColumnmscFrUniSigCurrentAggregateSvcEirNormalQ | read-only | obsolete | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through normal priority queue) assigned to existing SVCs on the interf… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.21 | ColumnmscFrUniSigCurrentAggregateSvcEirHighQ | read-only | obsolete | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through high priority queue) assigned to existing SVCs on the interfac… |
| 1.3.6.1.4.1.562.36.2.1.71.6.16.1.22 | ColumnmscFrUniSigCurrentAggregateSvcEirInterruptQ | read-only | obsolete | This attribute shows the aggregate SVC EIR (for excess traffic transiting in the network through interrupting queue) assigned to existing SVCs on the interface… |
| 1.3.6.1.4.1.562.36.2.1.71.6.17 | TablemscFrUniSigLapfStatusTable | not-accessible | mandatory | This group contains the Q.922 SVC data link layer status. |
| 1.3.6.1.4.1.562.36.2.1.71.6.17.1 | RowmscFrUniSigLapfStatusEntry | not-accessible | mandatory | An entry in the mscFrUniSigLapfStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.17.1.1 | ColumnmscFrUniSigCurrentState | read-only | mandatory | This attribute shows the current state of the SVC data link layer interface. |
| 1.3.6.1.4.1.562.36.2.1.71.6.17.1.2 | ColumnmscFrUniSigLastStateChangeReason | read-only | mandatory | This attribute shows the reason for the most recent state change. notStarted - this is the default state after SVC data link has just been created. abmeEntered… |
| 1.3.6.1.4.1.562.36.2.1.71.6.17.1.3 | ColumnmscFrUniSigFrmrReceive | read-only | mandatory | This attribute shows the information field of the Frame Reject (FRMR) most recently received. |
| 1.3.6.1.4.1.562.36.2.1.71.6.17.1.4 | ColumnmscFrUniSigCurrentQueueSize | read-only | mandatory | This attribute shows the current number of frames in the SVC data link layer transmit queue. |
| 1.3.6.1.4.1.562.36.2.1.71.6.18 | TablemscFrUniSigLapfStatsTable | not-accessible | mandatory | This group contains the statistics for the SVC data link layer. |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1 | RowmscFrUniSigLapfStatsEntry | not-accessible | mandatory | An entry in the mscFrUniSigLapfStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1.1 | ColumnmscFrUniSigStateChange | read-only | mandatory | This attribute counts the number of times the SVC data link layer interface has changed state. While the data link layer is in informationTransfer state, this … |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1.2 | ColumnmscFrUniSigRemoteBusy | read-only | mandatory | This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). … |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1.3 | ColumnmscFrUniSigReceiveRejectFrame | read-only | mandatory | This attribute counts the number of REJ frames received by the interface. When this count reaches maximum, it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1.4 | ColumnmscFrUniSigAckTimeout | read-only | mandatory | This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate a problem at the link or improper values have … |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1.5 | ColumnmscFrUniSigIFramesTransmitted | read-only | mandatory | This attribute counts the number of SVC I-frames transmitted to the interface on DLCI 0. An I-frame may be counted more than once if there are retransmissions … |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1.6 | ColumnmscFrUniSigIFramesTxDiscarded | read-only | mandatory | This attribute counts the number of SVC I-frames that are bound for the link but have been discarded. Discard reasons may be one of the following: 1. the frame… |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1.7 | ColumnmscFrUniSigIFramesReceived | read-only | mandatory | This attribute counts the number of SVC I-frames received from the interface. When this count reaches maximum, it wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.6.18.1.8 | ColumnmscFrUniSigIFramesRcvdDiscarded | read-only | mandatory | This attribute counts the number of SVC I-frames received but have been discarded. The discard reasons are: 1. incorrect frame size 2. frame is out of sequence… |
| 1.3.6.1.4.1.562.36.2.1.71.6.19 | TablemscFrUniSigSvcaccTable | not-accessible | mandatory | This group contains the provisionable attribute which controls accounting for this interface. |
| 1.3.6.1.4.1.562.36.2.1.71.6.19.1 | RowmscFrUniSigSvcaccEntry | not-accessible | mandatory | An entry in the mscFrUniSigSvcaccTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.19.1.1 | ColumnmscFrUniSigDefaultAccounting | read-write | mandatory | This attribute specifies whether accounting data collection and record generation is turned on for switched connections at this interface. For accounting data … |
| 1.3.6.1.4.1.562.36.2.1.71.6.20 | TablemscFrUniSigCodesTable | not-accessible | mandatory | This group contains the remote data network address, the last SVC clear cause and the last SVC diagnostic code coming from the subnet or the local VC. |
| 1.3.6.1.4.1.562.36.2.1.71.6.20.1 | RowmscFrUniSigCodesEntry | not-accessible | mandatory | An entry in the mscFrUniSigCodesTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.20.1.1 | ColumnmscFrUniSigLastClearRemoteDataNetworkAddress | read-only | mandatory | This attribute indicates the Data Network Address (DNA) of the remote (the other end of the SVC connection) of the call which cleared last and whose clear and … |
| 1.3.6.1.4.1.562.36.2.1.71.6.20.1.2 | ColumnmscFrUniSigLastClearCause | read-only | mandatory | This attribute indicates the last SVC clear cause signalled at the end of the connection or failure to connect. It is updated only if the clear request comes f… |
| 1.3.6.1.4.1.562.36.2.1.71.6.20.1.3 | ColumnmscFrUniSigLastDiagnosticCode | read-only | mandatory | This attribute indicates the last SVC diagnostic code signalled at the end of the connection or failure to connect. It is updated if the clear request comes fr… |
| 1.3.6.1.4.1.562.36.2.1.71.6.711 | TablemscFrUniSigBandwidthNotAvailableTable | not-accessible | mandatory | This attribute counts the number of call failures for each bandwidth pool due to the requested bandwidth not being available. |
| 1.3.6.1.4.1.562.36.2.1.71.6.711.1 | RowmscFrUniSigBandwidthNotAvailableEntry | not-accessible | mandatory | An entry in the mscFrUniSigBandwidthNotAvailableTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.711.1.1 | ColumnmscFrUniSigBandwidthNotAvailableIndex | not-accessible | mandatory | This variable represents the mscFrUniSigBandwidthNotAvailableTable specific index for the mscFrUniSigBandwidthNotAvailableTable. |
| 1.3.6.1.4.1.562.36.2.1.71.6.711.1.2 | ColumnmscFrUniSigBandwidthNotAvailableValue | read-only | mandatory | This variable represents an individual value for the mscFrUniSigBandwidthNotAvailableTable. |
| 1.3.6.1.4.1.562.36.2.1.71.8 | NodemscFrUniVFramer | |||
| 1.3.6.1.4.1.562.36.2.1.71.8.1 | TablemscFrUniVFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniVFramer components. |
| 1.3.6.1.4.1.562.36.2.1.71.8.1.1 | RowmscFrUniVFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniVFramer component. |
| 1.3.6.1.4.1.562.36.2.1.71.8.1.1.1 | ColumnmscFrUniVFramerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniVFramer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.8.1.1.2 | ColumnmscFrUniVFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.8.1.1.4 | ColumnmscFrUniVFramerStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniVFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.71.8.1.1.10 | ColumnmscFrUniVFramerIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniVFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.71.8.10 | TablemscFrUniVFramerProvTable | not-accessible | mandatory | This group contains provisionable attributes for the VirtualFramer component. |
| 1.3.6.1.4.1.562.36.2.1.71.8.10.1 | RowmscFrUniVFramerProvEntry | not-accessible | mandatory | An entry in the mscFrUniVFramerProvTable. |
| 1.3.6.1.4.1.562.36.2.1.71.8.10.1.1 | ColumnmscFrUniVFramerOtherVirtualFramer | read-write | mandatory | This attribute specifies the other VirtualFramer to which the service is linked, for example, FrUni/n VirtualFramer, FrDte/n VirtualFramer. |
| 1.3.6.1.4.1.562.36.2.1.71.8.10.1.2 | ColumnmscFrUniVFramerLogicalProcessor | read-write | mandatory | This attribute specifies the logical processor on which the service component will reside. |
| 1.3.6.1.4.1.562.36.2.1.71.8.11 | TablemscFrUniVFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.71.8.11.1 | RowmscFrUniVFramerStateEntry | not-accessible | mandatory | An entry in the mscFrUniVFramerStateTable. |
| 1.3.6.1.4.1.562.36.2.1.71.8.11.1.1 | ColumnmscFrUniVFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.71.8.11.1.2 | ColumnmscFrUniVFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.71.8.11.1.3 | ColumnmscFrUniVFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.71.8.12 | TablemscFrUniVFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a VirtualFramer component. |
| 1.3.6.1.4.1.562.36.2.1.71.8.12.1 | RowmscFrUniVFramerStatsEntry | not-accessible | mandatory | An entry in the mscFrUniVFramerStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.8.12.1.2 | ColumnmscFrUniVFramerFrmToOtherVFramer | read-only | mandatory | This attribute counts the frames transmitted to the otherVirtualFramer. |
| 1.3.6.1.4.1.562.36.2.1.71.8.12.1.3 | ColumnmscFrUniVFramerFrmFromOtherVFramer | read-only | mandatory | This attribute counts the frames received from the otherVirtualFramer. |
| 1.3.6.1.4.1.562.36.2.1.71.8.12.1.5 | ColumnmscFrUniVFramerOctetFromOtherVFramer | read-only | mandatory | This attribute counts the octets received from the otherVirtualFramer. |
| 1.3.6.1.4.1.562.36.2.1.71.9 | NodemscFrUniLts | |||
| 1.3.6.1.4.1.562.36.2.1.71.9.1 | TablemscFrUniLtsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniLts components. |
| 1.3.6.1.4.1.562.36.2.1.71.9.1.1 | RowmscFrUniLtsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniLts component. |
| 1.3.6.1.4.1.562.36.2.1.71.9.1.1.1 | ColumnmscFrUniLtsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniLts components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.9.1.1.2 | ColumnmscFrUniLtsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.9.1.1.4 | ColumnmscFrUniLtsStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniLts tables. |
| 1.3.6.1.4.1.562.36.2.1.71.9.1.1.10 | ColumnmscFrUniLtsIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniLts tables. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2 | NodemscFrUniLtsPat | |||
| 1.3.6.1.4.1.562.36.2.1.71.9.2.1 | TablemscFrUniLtsPatRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniLtsPat components. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.1.1 | RowmscFrUniLtsPatRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniLtsPat component. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.1.1.1 | ColumnmscFrUniLtsPatRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniLtsPat components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.1.1.2 | ColumnmscFrUniLtsPatComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.1.1.4 | ColumnmscFrUniLtsPatStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniLtsPat tables. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.1.1.10 | ColumnmscFrUniLtsPatIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniLtsPat tables. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10 | TablemscFrUniLtsPatDefaultsTable | not-accessible | mandatory | This attribute group contains the specifications of the pattern. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1 | RowmscFrUniLtsPatDefaultsEntry | not-accessible | mandatory | An entry in the mscFrUniLtsPatDefaultsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.200 | ColumnmscFrUniLtsPatDefaultDlci | read-write | mandatory | This attribute specifies for which dlci (on the local end) the frames are destined. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.201 | ColumnmscFrUniLtsPatDefaultNumFrames | read-write | mandatory | This attribute specifies the number of frames in this pattern. This is the number of frames of this type which will be generated in one timeInterval. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.202 | ColumnmscFrUniLtsPatDefaultDataSize | read-write | mandatory | This attribute specifies the payload size of each frame in bytes. This is in excess to the header. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.203 | ColumnmscFrUniLtsPatDefaultHeaderBits | read-write | mandatory | This attribute specifies whether the following bits are on/off in the header of each frame. The following bits can be set: BeCn, C/R, De, FeCn Description of b… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.204 | ColumnmscFrUniLtsPatDefaultHeaderLength | read-write | mandatory | This attribute specifies the size of the frame relay header in bytes. Passport currently only supports a 2-byte header. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.205 | ColumnmscFrUniLtsPatDefaultEABits | read-write | mandatory | This attribute specifies how the address field extension bits are set in the frame header. Consider the value to be a four bit binary number. For example, 4 = … |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.206 | ColumnmscFrUniLtsPatDefaultPayloadPattern | read-write | mandatory | This attribute specifies the payload of each frame. The value specified is in hexadecimal, where every two digits represent a byte. A maximum of 24 digits (12 … |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.207 | ColumnmscFrUniLtsPatDefaultRfc1490Header | read-write | mandatory | This attribute specifies the appropriate RFC 1490 encapsulated header of the frame. A value of 0 indicates no 1490 header. NOTE: This header resides in the fir… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.208 | ColumnmscFrUniLtsPatDefaultUseBadLrc | read-write | mandatory | This attribute specifies whether the frames from this pattern are to have a bad LRC prior to being sent to the framer. The LRC is checked while the frame is be… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11 | TablemscFrUniLtsPatSetupTable | not-accessible | mandatory | This attribute group contains the specifications of the pattern. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1 | RowmscFrUniLtsPatSetupEntry | not-accessible | mandatory | An entry in the mscFrUniLtsPatSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.200 | ColumnmscFrUniLtsPatDlci | read-write | mandatory | This attribute specifies for which dlci (on the local end) the frames are destined. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.201 | ColumnmscFrUniLtsPatNumFrames | read-write | mandatory | This attribute specifies the number of frames in this pattern. This is the number of frames of this type which will be generated in one timeInterval. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.202 | ColumnmscFrUniLtsPatDataSize | read-write | mandatory | This attribute specifies the payload size of each frame in bytes. This is in excess to the header. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.203 | ColumnmscFrUniLtsPatHeaderBits | read-write | mandatory | This attribute specifies whether the following bits are on/off in the header of each frame. The following bits can be set: BeCn, C/R, De, FeCn Description of b… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.204 | ColumnmscFrUniLtsPatHeaderLength | read-write | mandatory | This attribute specifies the size of the frame relay header in bytes. Passport currently only supports a 2-byte header. Valid values are 0, 2, 3, 4. 0 indicate… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.205 | ColumnmscFrUniLtsPatEaBits | read-write | mandatory | This attribute specifies how the address field extension bits are set in the frame header. Consider the value to be a four bit binary number. For example, 4 = … |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.206 | ColumnmscFrUniLtsPatPayloadPattern | read-write | mandatory | This attribute specifies the payload of each frame. The value specified is in hexadecimal, where every two digits represent a byte. A maximum of 24 digits (12 … |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.207 | ColumnmscFrUniLtsPatRfc1490Header | read-write | mandatory | This attribute specifies the appropriate RFC 1490 encapsulated header of the frame. A value of 0 indicates no 1490 header. NOTE: This header resides in the fir… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.208 | ColumnmscFrUniLtsPatUseBadLrc | read-write | mandatory | This attribute specifies whether the frames from this pattern are to have a bad LRC prior to being sent to the framer. The LRC is checked while the frame is be… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.12 | TablemscFrUniLtsPatOpDataTable | not-accessible | mandatory | This group contains the operational attributes which allow changing the pattern outside of provisioning mode. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.12.1 | RowmscFrUniLtsPatOpDataEntry | not-accessible | mandatory | An entry in the mscFrUniLtsPatOpDataTable. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.12.1.200 | ColumnmscFrUniLtsPatFramePattern | read-only | mandatory | This attribute displays the first 20 to 24 bytes of the frame payload, depending on the frame relay header size selected. This attribute represents the frame i… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.12.1.201 | ColumnmscFrUniLtsPatHdlcBitsInserted | read-only | mandatory | This attribute displays how many times a zero bit will be inserted after 5 consecutive 1 bits when a frame from this pattern is sent out. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.13 | TablemscFrUniLtsPatOpStateTable | not-accessible | mandatory | This group contains the attributes containing the operational statistics of the pattern. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.13.1 | RowmscFrUniLtsPatOpStateEntry | not-accessible | mandatory | An entry in the mscFrUniLtsPatOpStateTable. |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.13.1.200 | ColumnmscFrUniLtsPatLoad | read-only | mandatory | This attribute indicates the load due to this particular pattern. The loads associated with all of the provisioned patterns are summed to arrive at the FrLts l… |
| 1.3.6.1.4.1.562.36.2.1.71.9.2.13.1.201 | ColumnmscFrUniLtsPatStatus | read-write | mandatory | This attributes specifies the administrative state of the pattern. A disabled pattern will not be generated, although it can still be triggered. |
| 1.3.6.1.4.1.562.36.2.1.71.9.10 | TablemscFrUniLtsSetupTable | not-accessible | mandatory | This attribute group contains the parameters used to configure the behavior of the Frame Relay Load Test System. |
| 1.3.6.1.4.1.562.36.2.1.71.9.10.1 | RowmscFrUniLtsSetupEntry | not-accessible | mandatory | An entry in the mscFrUniLtsSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.71.9.10.1.200 | ColumnmscFrUniLtsDuration | read-write | mandatory | This attribute specifies the duration of the test in milliseconds. The test will run until the duration expires or the STOP command is issued. A value of 0 is … |
| 1.3.6.1.4.1.562.36.2.1.71.9.10.1.201 | ColumnmscFrUniLtsAlgorithm | read-write | mandatory | This attribute specifies which algorithm is used to generate the frames. ContinuousBurst This mode of traffic generation creates traffic at the maximum rate po… |
| 1.3.6.1.4.1.562.36.2.1.71.9.10.1.204 | ColumnmscFrUniLtsBurstSize | read-write | mandatory | This attribute specifies the number of frames per burst under the delayedBurst and intervalBurst algorithms. |
| 1.3.6.1.4.1.562.36.2.1.71.9.10.1.205 | ColumnmscFrUniLtsTimeInterval | read-write | mandatory | This attribute specifies the time interval to the specified number of seconds. Granuality is in centiseconds. Maximum is 1 minute. |
| 1.3.6.1.4.1.562.36.2.1.71.9.11 | TablemscFrUniLtsStateTable | not-accessible | mandatory | This group contains the operation statistics of the load generator. |
| 1.3.6.1.4.1.562.36.2.1.71.9.11.1 | RowmscFrUniLtsStateEntry | not-accessible | mandatory | An entry in the mscFrUniLtsStateTable. |
| 1.3.6.1.4.1.562.36.2.1.71.9.11.1.200 | ColumnmscFrUniLtsGeneratorState | read-only | mandatory | This attribute indicates whether the Lts is generating traffic. |
| 1.3.6.1.4.1.562.36.2.1.71.9.11.1.201 | ColumnmscFrUniLtsCycleIncomplete | read-only | mandatory | This attribute indicates whether the time required to generate all of the enabled patterns is more than timeInterval by a true value. Otherwise, this flag is s… |
| 1.3.6.1.4.1.562.36.2.1.71.9.11.1.202 | ColumnmscFrUniLtsLastActiveInterval | read-only | mandatory | This attribute indicates the actual time it took to generate all of the enabled patterns in the last cycle. If cycleIncomplete is true, this value should be ze… |
| 1.3.6.1.4.1.562.36.2.1.71.9.11.1.204 | ColumnmscFrUniLtsLoad | read-only | mandatory | This attribute indicates the load being generated. This value represents that calculated using the set number of ticks. The actual burstTimeInterval may differ… |
| 1.3.6.1.4.1.562.36.2.1.71.9.11.1.205 | ColumnmscFrUniLtsElapsedGenerationTime | read-only | mandatory | This attribute indicates how many milliseconds have elapsed since the start of this test. |
| 1.3.6.1.4.1.562.36.2.1.71.9.12 | TablemscFrUniLtsResultsTable | not-accessible | mandatory | This group contains the frame counting attributes for the LTS component. |
| 1.3.6.1.4.1.562.36.2.1.71.9.12.1 | RowmscFrUniLtsResultsEntry | not-accessible | mandatory | An entry in the mscFrUniLtsResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.9.12.1.200 | ColumnmscFrUniLtsFramesTx | read-only | mandatory | This attribute specifies the number of frames send to the network since the last time these statistics were cleared. This is similar to the framesToIf attribut… |
| 1.3.6.1.4.1.562.36.2.1.71.9.12.1.204 | ColumnmscFrUniLtsBytesTx | read-only | mandatory | This attribute indicates the number of bytes sent. |
| 1.3.6.1.4.1.562.36.2.1.71.9.12.1.208 | ColumnmscFrUniLtsBitRateTx | read-only | mandatory | This attribute indicates the bit rate being sent to the link. It should only differ from the load if the burstTimeInterval would be >= the timeInterval or burs… |
| 1.3.6.1.4.1.562.36.2.1.71.9.12.1.209 | ColumnmscFrUniLtsFrameRateTx | read-only | mandatory | This attribute indicates the frame rate being sent to the link. It is calculated using the number of frames sent to the link in one cycle of the patterns. |
| 1.3.6.1.4.1.562.36.2.1.71.10 | TablemscFrUniCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.71.10.1 | RowmscFrUniCidDataEntry | not-accessible | mandatory | An entry in the mscFrUniCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.71.10.1.1 | ColumnmscFrUniCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.71.11 | TablemscFrUniStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.71.11.1 | RowmscFrUniStateEntry | not-accessible | mandatory | An entry in the mscFrUniStateTable. |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.1 | ColumnmscFrUniAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.2 | ColumnmscFrUniOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.3 | ColumnmscFrUniUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.4 | ColumnmscFrUniAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.5 | ColumnmscFrUniProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.6 | ColumnmscFrUniControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.7 | ColumnmscFrUniAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.8 | ColumnmscFrUniStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.71.11.1.9 | ColumnmscFrUniUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.71.12 | TablemscFrUniStatsTable | not-accessible | mandatory | FrUni/n Statistics This group contains the statistics about the operational behavior of the service at the interface level. |
| 1.3.6.1.4.1.562.36.2.1.71.12.1 | RowmscFrUniStatsEntry | not-accessible | mandatory | An entry in the mscFrUniStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.12.1.1 | ColumnmscFrUniLastUnknownDlci | read-only | mandatory | This attribute identifies the most recent DLCI which user frames were received on for which a DLCI has not been provisioned on the port. |
| 1.3.6.1.4.1.562.36.2.1.71.12.1.2 | ColumnmscFrUniUnknownDlciFramesFromIf | read-only | mandatory | This attribute contains a count of the number of frames received from the interface with an unknown DLCI (DLCI which is not provisioned). When the maximum is r… |
| 1.3.6.1.4.1.562.36.2.1.71.12.1.3 | ColumnmscFrUniInvalidHeaderFramesFromIf | read-only | mandatory | This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero. |
| 1.3.6.1.4.1.562.36.2.1.71.13 | TablemscFrUniIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.71.13.1 | RowmscFrUniIfEntryEntry | not-accessible | mandatory | An entry in the mscFrUniIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.71.13.1.1 | ColumnmscFrUniIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.71.13.1.2 | ColumnmscFrUniIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.71.14 | TablemscFrUniOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.71.14.1 | RowmscFrUniOperStatusEntry | not-accessible | mandatory | An entry in the mscFrUniOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.71.14.1.1 | ColumnmscFrUniSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.71.15 | TablemscFrUniEmissionPriorityQsTable | not-accessible | mandatory | This group contains the provisionable attribute to specifie the number of Frame Relay egress emission priority queues to be used on that Frame Relay Interface |
| 1.3.6.1.4.1.562.36.2.1.71.15.1 | RowmscFrUniEmissionPriorityQsEntry | not-accessible | mandatory | An entry in the mscFrUniEmissionPriorityQsTable. |
| 1.3.6.1.4.1.562.36.2.1.71.15.1.1 | ColumnmscFrUniNumberOfEmissionQs | read-write | mandatory | This attribute specifies the number of egress emission priority queues that will be used for that Frame Relay interface. The possible values of this attribute … |
| 1.3.6.1.4.1.562.36.2.1.71.101 | NodemscFrUniCa | |||
| 1.3.6.1.4.1.562.36.2.1.71.101.1 | TablemscFrUniCaRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniCa components. |
| 1.3.6.1.4.1.562.36.2.1.71.101.1.1 | RowmscFrUniCaRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniCa component. |
| 1.3.6.1.4.1.562.36.2.1.71.101.1.1.1 | ColumnmscFrUniCaRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscFrUniCa components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.101.1.1.2 | ColumnmscFrUniCaComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.101.1.1.4 | ColumnmscFrUniCaStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniCa tables. |
| 1.3.6.1.4.1.562.36.2.1.71.101.1.1.10 | ColumnmscFrUniCaIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniCa tables. |
| 1.3.6.1.4.1.562.36.2.1.71.101.2 | NodemscFrUniCaTpm | |||
| 1.3.6.1.4.1.562.36.2.1.71.101.2.1 | TablemscFrUniCaTpmRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscFrUniCaTpm components. |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.1.1 | RowmscFrUniCaTpmRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscFrUniCaTpm component. |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.1.1.1 | ColumnmscFrUniCaTpmRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscFrUniCaTpm components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.1.1.2 | ColumnmscFrUniCaTpmComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.1.1.4 | ColumnmscFrUniCaTpmStorageType | read-only | mandatory | This variable represents the storage type value for the mscFrUniCaTpm tables. |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.1.1.10 | ColumnmscFrUniCaTpmIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniCaTpm tables. |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.10 | TablemscFrUniCaTpmProvTable | not-accessible | mandatory | This attribute group contains the provisionable attributes of the Tpm component at this interface. |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.10.1 | RowmscFrUniCaTpmProvEntry | not-accessible | mandatory | An entry in the mscFrUniCaTpmProvTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.10.1.2 | ColumnmscFrUniCaTpmAssignedIngressBandwidthPool | read-write | mandatory | This attribute specifies the ingress bandwidth pool which is used to support this transfer priority at this interface. When this attribute is set to sameAsModu… |
| 1.3.6.1.4.1.562.36.2.1.71.101.2.10.1.3 | ColumnmscFrUniCaTpmAssignedEgressBandwidthPool | read-write | mandatory | This attribute specifies the egress bandwidth pool which is used to support this transfer priority at this interface. When this attribute is set to sameAsModul… |
| 1.3.6.1.4.1.562.36.2.1.71.101.10 | TablemscFrUniCaProvTable | not-accessible | mandatory | This attribute group contains the common provisionable attributes of the Ca component. |
| 1.3.6.1.4.1.562.36.2.1.71.101.10.1 | RowmscFrUniCaProvEntry | not-accessible | mandatory | An entry in the mscFrUniCaProvTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.10.1.2 | ColumnmscFrUniCaOverrideLinkRate | read-write | mandatory | This attribute allows the link rate to be overridden for this interface. This allows the user to specify a value other than the actual physical link rate compu… |
| 1.3.6.1.4.1.562.36.2.1.71.101.10.1.3 | ColumnmscFrUniCaMaximumBandwidthPerCall | read-write | mandatory | This attribute specifies the maximum bandwidth that can be allocated per connection. |
| 1.3.6.1.4.1.562.36.2.1.71.101.11 | TablemscFrUniCaIngressCacTable | not-accessible | mandatory | This attribute group contains the common provisionable attributes for ingress call admission control. |
| 1.3.6.1.4.1.562.36.2.1.71.101.11.1 | RowmscFrUniCaIngressCacEntry | not-accessible | mandatory | An entry in the mscFrUniCaIngressCacTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.11.1.2 | ColumnmscFrUniCaIngressApplyToCos | read-write | mandatory | This attribute specifies which Classes of Service (CoS) have ingress Call Admission Control (CAC) applied to them. Ingress CAC applies only to swithced connect… |
| 1.3.6.1.4.1.562.36.2.1.71.101.11.1.4 | ColumnmscFrUniCaIngressMaximumEirOnlyCalls | read-write | mandatory | This attribute specifies the maximum number of connections in the ingress direction with EIR only traffic that can be up at a given time. |
| 1.3.6.1.4.1.562.36.2.1.71.101.12 | TablemscFrUniCaEgressCacTable | not-accessible | mandatory | This attribute group contains the common provisionable attributes for egress call admission control. |
| 1.3.6.1.4.1.562.36.2.1.71.101.12.1 | RowmscFrUniCaEgressCacEntry | not-accessible | mandatory | An entry in the mscFrUniCaEgressCacTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.12.1.2 | ColumnmscFrUniCaEgressApplyToCos | read-write | mandatory | This attribute specifies which Classes of Service (CoS) have egress Call Admission Control (CAC) applied to them. Egress CAC applies only to swithced connectio… |
| 1.3.6.1.4.1.562.36.2.1.71.101.12.1.4 | ColumnmscFrUniCaEgressMaximumEirOnlyCalls | read-write | mandatory | This attribute specifies the maximum number of connections in the egress direction with EIR only traffic that can be up at a given time. |
| 1.3.6.1.4.1.562.36.2.1.71.101.13 | TablemscFrUniCaOpTable | not-accessible | mandatory | This attribute group contains the operational status of the Ca component. |
| 1.3.6.1.4.1.562.36.2.1.71.101.13.1 | RowmscFrUniCaOpEntry | not-accessible | mandatory | An entry in the mscFrUniCaOpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.13.1.2 | ColumnmscFrUniCaLinkRate | read-only | mandatory | This attribute indicates the link rate used by both ingress and egress CAC to calculate the effective bandwidth pool sizes. If the provisionable attribute over… |
| 1.3.6.1.4.1.562.36.2.1.71.101.13.1.681 | ColumnmscFrUniCaNumberRejectedEgressCirPermConn | read-only | mandatory | This attribute indicates the number of permanent connections (that is, PVC and P-SPVC) that are rejected by egress CAC. A connection is rejected by egress CAC … |
| 1.3.6.1.4.1.562.36.2.1.71.101.13.1.682 | ColumnmscFrUniCaNumberRejectedEgressEirPermConn | read-only | mandatory | This attribute indicates the number of permanent connections (that is, PVC and P-SPVC) that are rejected by egress CAC. A connection is rejected by egress CAC … |
| 1.3.6.1.4.1.562.36.2.1.71.101.666 | TablemscFrUniCaIngCirBPTable | not-accessible | mandatory | Port capacity is partitioned into 16 pools (pool 0 through pool 15) for the ingress CIR traffic. This attribute specifies the percentage of port capacity that … |
| 1.3.6.1.4.1.562.36.2.1.71.101.666.1 | RowmscFrUniCaIngCirBPEntry | not-accessible | mandatory | An entry in the mscFrUniCaIngCirBPTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.666.1.1 | ColumnmscFrUniCaIngCirBPIndex | not-accessible | mandatory | This variable represents the mscFrUniCaIngCirBPTable specific index for the mscFrUniCaIngCirBPTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.666.1.2 | ColumnmscFrUniCaIngCirBPValue | read-write | mandatory | This variable represents an individual value for the mscFrUniCaIngCirBPTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.667 | TablemscFrUniCaEgCirBpTable | not-accessible | mandatory | Port capacity is partitioned into 16 pools (pool 0 through pool 15) for the egress CIR traffic. This attribute specifies the percentage of port capacity that i… |
| 1.3.6.1.4.1.562.36.2.1.71.101.667.1 | RowmscFrUniCaEgCirBpEntry | not-accessible | mandatory | An entry in the mscFrUniCaEgCirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.667.1.1 | ColumnmscFrUniCaEgCirBpIndex | not-accessible | mandatory | This variable represents the mscFrUniCaEgCirBpTable specific index for the mscFrUniCaEgCirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.667.1.2 | ColumnmscFrUniCaEgCirBpValue | read-write | mandatory | This variable represents an individual value for the mscFrUniCaEgCirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.668 | TablemscFrUniCaIngCirPoolAdmitBwTable | not-accessible | mandatory | This attribute indicates the total admitted CIR bandwidth from each CIR bandwidth pool in the ingress direction. Each value is the sum of the equivalent bit ra… |
| 1.3.6.1.4.1.562.36.2.1.71.101.668.1 | RowmscFrUniCaIngCirPoolAdmitBwEntry | not-accessible | mandatory | An entry in the mscFrUniCaIngCirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.668.1.1 | ColumnmscFrUniCaIngCirPoolAdmitBwIndex | not-accessible | mandatory | This variable represents the mscFrUniCaIngCirPoolAdmitBwTable specific index for the mscFrUniCaIngCirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.668.1.2 | ColumnmscFrUniCaIngCirPoolAdmitBwValue | read-only | mandatory | This variable represents an individual value for the mscFrUniCaIngCirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.669 | TablemscFrUniCaIngCirPoolAvailBwTable | not-accessible | mandatory | This attribute indicates the remaining available CIR bandwidth in each ingress CIR bandwidth pool. |
| 1.3.6.1.4.1.562.36.2.1.71.101.669.1 | RowmscFrUniCaIngCirPoolAvailBwEntry | not-accessible | mandatory | An entry in the mscFrUniCaIngCirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.669.1.1 | ColumnmscFrUniCaIngCirPoolAvailBwIndex | not-accessible | mandatory | This variable represents the mscFrUniCaIngCirPoolAvailBwTable specific index for the mscFrUniCaIngCirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.669.1.2 | ColumnmscFrUniCaIngCirPoolAvailBwValue | read-only | mandatory | This variable represents an individual value for the mscFrUniCaIngCirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.670 | TablemscFrUniCaEgCirPoolAdmitBwTable | not-accessible | mandatory | This attribute indicates the total admitted CIR bandwidth from each CIR bandwidth pool in the egress direction. Each value is the sum of the equivalent bit rat… |
| 1.3.6.1.4.1.562.36.2.1.71.101.670.1 | RowmscFrUniCaEgCirPoolAdmitBwEntry | not-accessible | mandatory | An entry in the mscFrUniCaEgCirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.670.1.1 | ColumnmscFrUniCaEgCirPoolAdmitBwIndex | not-accessible | mandatory | This variable represents the mscFrUniCaEgCirPoolAdmitBwTable specific index for the mscFrUniCaEgCirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.670.1.2 | ColumnmscFrUniCaEgCirPoolAdmitBwValue | read-only | mandatory | This variable represents an individual value for the mscFrUniCaEgCirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.671 | TablemscFrUniCaEgCirPoolAvailBwTable | not-accessible | mandatory | This attribute indicates the remaining available CIR bandwidth in each egress CIR bandwidth pool. |
| 1.3.6.1.4.1.562.36.2.1.71.101.671.1 | RowmscFrUniCaEgCirPoolAvailBwEntry | not-accessible | mandatory | An entry in the mscFrUniCaEgCirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.671.1.1 | ColumnmscFrUniCaEgCirPoolAvailBwIndex | not-accessible | mandatory | This variable represents the mscFrUniCaEgCirPoolAvailBwTable specific index for the mscFrUniCaEgCirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.671.1.2 | ColumnmscFrUniCaEgCirPoolAvailBwValue | read-only | mandatory | This variable represents an individual value for the mscFrUniCaEgCirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.673 | TablemscFrUniCaIngEirBpTable | not-accessible | mandatory | Port capacity is partitioned into 16 pools (pool 0 through pool 15) for the ingress EIR traffic. This attribute specifies the percentage of port capacity that … |
| 1.3.6.1.4.1.562.36.2.1.71.101.673.1 | RowmscFrUniCaIngEirBpEntry | not-accessible | mandatory | An entry in the mscFrUniCaIngEirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.673.1.1 | ColumnmscFrUniCaIngEirBpIndex | not-accessible | mandatory | This variable represents the mscFrUniCaIngEirBpTable specific index for the mscFrUniCaIngEirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.673.1.2 | ColumnmscFrUniCaIngEirBpValue | read-write | mandatory | This variable represents an individual value for the mscFrUniCaIngEirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.674 | TablemscFrUniCaEgEirBpTable | not-accessible | mandatory | Port capacity is partitioned into 16 pools (pool 0 through pool 15) for the egress EIR traffic. This attribute specifies the percentage of port capacity that i… |
| 1.3.6.1.4.1.562.36.2.1.71.101.674.1 | RowmscFrUniCaEgEirBpEntry | not-accessible | mandatory | An entry in the mscFrUniCaEgEirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.674.1.1 | ColumnmscFrUniCaEgEirBpIndex | not-accessible | mandatory | This variable represents the mscFrUniCaEgEirBpTable specific index for the mscFrUniCaEgEirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.674.1.2 | ColumnmscFrUniCaEgEirBpValue | read-write | mandatory | This variable represents an individual value for the mscFrUniCaEgEirBpTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.675 | TablemscFrUniCaIngEirPoolAdmitBwTable | not-accessible | mandatory | This attribute indicates the total admitted EIR bandwidth from each EIR bandwidth pool in the ingress direction. Each value is the sum of the equivalent bit ra… |
| 1.3.6.1.4.1.562.36.2.1.71.101.675.1 | RowmscFrUniCaIngEirPoolAdmitBwEntry | not-accessible | mandatory | An entry in the mscFrUniCaIngEirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.675.1.1 | ColumnmscFrUniCaIngEirPoolAdmitBwIndex | not-accessible | mandatory | This variable represents the mscFrUniCaIngEirPoolAdmitBwTable specific index for the mscFrUniCaIngEirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.675.1.2 | ColumnmscFrUniCaIngEirPoolAdmitBwValue | read-only | mandatory | This variable represents an individual value for the mscFrUniCaIngEirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.676 | TablemscFrUniCaIngEirPoolAvailBwTable | not-accessible | mandatory | This attribute indicates the remaining available EIR bandwidth in each ingress EIR bandwidth pool. If the ingressApplyToCos attribute is set to either none or … |
| 1.3.6.1.4.1.562.36.2.1.71.101.676.1 | RowmscFrUniCaIngEirPoolAvailBwEntry | not-accessible | mandatory | An entry in the mscFrUniCaIngEirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.676.1.1 | ColumnmscFrUniCaIngEirPoolAvailBwIndex | not-accessible | mandatory | This variable represents the mscFrUniCaIngEirPoolAvailBwTable specific index for the mscFrUniCaIngEirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.676.1.2 | ColumnmscFrUniCaIngEirPoolAvailBwValue | read-only | mandatory | This variable represents an individual value for the mscFrUniCaIngEirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.677 | TablemscFrUniCaEgEirPoolAdmitBwTable | not-accessible | mandatory | This attribute indicates the total admitted EIR bandwidth from each EIR bandwidth pool in the egress direction. Each value is the sum of the equivalent bit rat… |
| 1.3.6.1.4.1.562.36.2.1.71.101.677.1 | RowmscFrUniCaEgEirPoolAdmitBwEntry | not-accessible | mandatory | An entry in the mscFrUniCaEgEirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.677.1.1 | ColumnmscFrUniCaEgEirPoolAdmitBwIndex | not-accessible | mandatory | This variable represents the mscFrUniCaEgEirPoolAdmitBwTable specific index for the mscFrUniCaEgEirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.677.1.2 | ColumnmscFrUniCaEgEirPoolAdmitBwValue | read-only | mandatory | This variable represents an individual value for the mscFrUniCaEgEirPoolAdmitBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.678 | TablemscFrUniCaEgEirPoolAvailBwTable | not-accessible | mandatory | This attribute indicates the remaining available EIR bandwidth in each egress EIR bandwidth pool. If the egressApplyToCos attribute is set to either none or ci… |
| 1.3.6.1.4.1.562.36.2.1.71.101.678.1 | RowmscFrUniCaEgEirPoolAvailBwEntry | not-accessible | mandatory | An entry in the mscFrUniCaEgEirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.678.1.1 | ColumnmscFrUniCaEgEirPoolAvailBwIndex | not-accessible | mandatory | This variable represents the mscFrUniCaEgEirPoolAvailBwTable specific index for the mscFrUniCaEgEirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.101.678.1.2 | ColumnmscFrUniCaEgEirPoolAvailBwValue | read-only | mandatory | This variable represents an individual value for the mscFrUniCaEgEirPoolAvailBwTable. |
| 1.3.6.1.4.1.562.36.2.1.71.341 | TablemscFrUniFrmToIfByQueueTable | not-accessible | mandatory | This attribute counts the total number of frames transmitted to the interface per egress emission priority queue since the component has been activated. There … |
| 1.3.6.1.4.1.562.36.2.1.71.341.1 | RowmscFrUniFrmToIfByQueueEntry | not-accessible | mandatory | An entry in the mscFrUniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.36.2.1.71.341.1.1 | ColumnmscFrUniFrmToIfByQueueIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.36.2.1.71.341.1.2 | ColumnmscFrUniFrmToIfByQueueValue | read-only | mandatory | This variable represents an individual value for the mscFrUniFrmToIfByQueueTable. |
| 1.3.6.1.4.1.562.36.2.1.71.342 | TablemscFrUniOctetToIfByQueueTable | not-accessible | mandatory | This attribute counts the total number of octets transmitted from the service to the interface per emission priority queue since the component has been activat… |
| 1.3.6.1.4.1.562.36.2.1.71.342.1 | RowmscFrUniOctetToIfByQueueEntry | not-accessible | mandatory | An entry in the mscFrUniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.36.2.1.71.342.1.1 | ColumnmscFrUniOctetToIfByQueueIndex | not-accessible | mandatory | This variable represents the index for the mscFrUniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.36.2.1.71.342.1.2 | ColumnmscFrUniOctetToIfByQueueValue | read-only | mandatory | This variable represents an individual value for the mscFrUniOctetToIfByQueueTable. |
| 1.3.6.1.4.1.562.36.2.2.24 | NodeframeRelayUniMIB | |||
| 1.3.6.1.4.1.562.36.2.2.24.1 | NodeframeRelayUniGroup | |||
| 1.3.6.1.4.1.562.36.2.2.24.1.1 | NodeframeRelayUniGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.24.1.1.3 | NodeframeRelayUniGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.24.1.1.3.2 | NodeframeRelayUniGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.24.3 | NodeframeRelayUniCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.24.3.1 | NodeframeRelayUniCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.24.3.1.3 | NodeframeRelayUniCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.24.3.1.3.2 | NodeframeRelayUniCapabilitiesCA02A |