Nortel-MsCarrier-MscPassport-GsmIwfMIB
385 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.127 | NodemscGsmCs | |||
| 1.3.6.1.4.1.562.36.2.1.127.1 | TablemscGsmCsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmCs components. |
| 1.3.6.1.4.1.562.36.2.1.127.1.1 | RowmscGsmCsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmCs component. |
| 1.3.6.1.4.1.562.36.2.1.127.1.1.1 | ColumnmscGsmCsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscGsmCs components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.127.1.1.2 | ColumnmscGsmCsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.127.1.1.4 | ColumnmscGsmCsStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmCs tables. |
| 1.3.6.1.4.1.562.36.2.1.127.1.1.10 | ColumnmscGsmCsTrunkGrpIndex | not-accessible | mandatory | This variable represents the index for the mscGsmCs tables. |
| 1.3.6.1.4.1.562.36.2.1.127.2 | NodemscGsmCsModem | |||
| 1.3.6.1.4.1.562.36.2.1.127.2.1 | TablemscGsmCsModemRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmCsModem components. |
| 1.3.6.1.4.1.562.36.2.1.127.2.1.1 | RowmscGsmCsModemRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmCsModem component. |
| 1.3.6.1.4.1.562.36.2.1.127.2.1.1.1 | ColumnmscGsmCsModemRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmCsModem components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.127.2.1.1.2 | ColumnmscGsmCsModemComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.127.2.1.1.4 | ColumnmscGsmCsModemStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmCsModem tables. |
| 1.3.6.1.4.1.562.36.2.1.127.2.1.1.10 | ColumnmscGsmCsModemIndex | not-accessible | mandatory | This variable represents the index for the mscGsmCsModem tables. |
| 1.3.6.1.4.1.562.36.2.1.127.3 | NodemscGsmCsRlp | |||
| 1.3.6.1.4.1.562.36.2.1.127.3.1 | TablemscGsmCsRlpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmCsRlp components. |
| 1.3.6.1.4.1.562.36.2.1.127.3.1.1 | RowmscGsmCsRlpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmCsRlp component. |
| 1.3.6.1.4.1.562.36.2.1.127.3.1.1.1 | ColumnmscGsmCsRlpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmCsRlp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.127.3.1.1.2 | ColumnmscGsmCsRlpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.127.3.1.1.4 | ColumnmscGsmCsRlpStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmCsRlp tables. |
| 1.3.6.1.4.1.562.36.2.1.127.3.1.1.10 | ColumnmscGsmCsRlpIndex | not-accessible | mandatory | This variable represents the index for the mscGsmCsRlp tables. |
| 1.3.6.1.4.1.562.36.2.1.127.3.10 | TablemscGsmCsRlpProvTable | not-accessible | mandatory | This group contains provisionable attributes for the Radio Link Protocol (RLP) parameters used for the call set up by this particular GsmIwfCallServer. Changes… |
| 1.3.6.1.4.1.562.36.2.1.127.3.10.1 | RowmscGsmCsRlpProvEntry | not-accessible | mandatory | An entry in the mscGsmCsRlpProvTable. |
| 1.3.6.1.4.1.562.36.2.1.127.3.10.1.1 | ColumnmscGsmCsRlpHighestVersion | read-write | mandatory | This attribute specifies the highest version of the Radio Link Protocol (RLP) protocol supported on this GsmIwfCallServer. Valid values are: 0, Single-link bas… |
| 1.3.6.1.4.1.562.36.2.1.127.3.10.1.2 | ColumnmscGsmCsRlpIwfToMsWindowSize | read-write | mandatory | This attribute specifies the maximum number of sequentially numbered Information (I) frames that may be outstanding (that is, unacknowledged) at any given time… |
| 1.3.6.1.4.1.562.36.2.1.127.3.10.1.3 | ColumnmscGsmCsRlpMsToIwfWindowSize | read-write | mandatory | This attribute specifies the maximum number of sequentially numbered Information (I) frames that may be outstanding (that is, unacknowledged) at any given time… |
| 1.3.6.1.4.1.562.36.2.1.127.3.10.1.4 | ColumnmscGsmCsRlpT1AckTimer | read-write | mandatory | This attribute specifies the time in milliseconds within which an acknowledgment of a sent frame must be received. Once this timer expires, the transmitting Ra… |
| 1.3.6.1.4.1.562.36.2.1.127.3.10.1.5 | ColumnmscGsmCsRlpT2AckDelayTimer | read-write | mandatory | This attribute specifies the maximum time in milliseconds the receiving Radio Link Protocol (RLP) entity shall wait before sending an acknowledgment for a rece… |
| 1.3.6.1.4.1.562.36.2.1.127.3.10.1.6 | ColumnmscGsmCsRlpN2RetransmitCount | read-write | mandatory | This attribute specifies the maximum number of times a Radio Link Protocol (RLP) entity shall retransmit an individual frame following the expiry of timer T1. … |
| 1.3.6.1.4.1.562.36.2.1.127.4 | NodemscGsmCsFax | |||
| 1.3.6.1.4.1.562.36.2.1.127.4.1 | TablemscGsmCsFaxRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmCsFax components. |
| 1.3.6.1.4.1.562.36.2.1.127.4.1.1 | RowmscGsmCsFaxRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmCsFax component. |
| 1.3.6.1.4.1.562.36.2.1.127.4.1.1.1 | ColumnmscGsmCsFaxRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmCsFax components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.127.4.1.1.2 | ColumnmscGsmCsFaxComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.127.4.1.1.4 | ColumnmscGsmCsFaxStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmCsFax tables. |
| 1.3.6.1.4.1.562.36.2.1.127.4.1.1.10 | ColumnmscGsmCsFaxIndex | not-accessible | mandatory | This variable represents the index for the mscGsmCsFax tables. |
| 1.3.6.1.4.1.562.36.2.1.127.4.10 | TablemscGsmCsFaxProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the fascimile protocol (T.30 and GSM 03.45) for this particular GsmIwfCallServer. Changes to these attribu… |
| 1.3.6.1.4.1.562.36.2.1.127.4.10.1 | RowmscGsmCsFaxProvEntry | not-accessible | mandatory | An entry in the mscGsmCsFaxProvTable. |
| 1.3.6.1.4.1.562.36.2.1.127.4.10.1.1 | ColumnmscGsmCsFaxT1CalledToneTimer | read-write | mandatory | This attribute specifies the delay to generate a Called (CED) tone at the IWF after the called station is connected to the line for mobile terminated calls. Ch… |
| 1.3.6.1.4.1.562.36.2.1.127.5 | NodemscGsmCsV42 | |||
| 1.3.6.1.4.1.562.36.2.1.127.5.1 | TablemscGsmCsV42RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmCsV42 components. |
| 1.3.6.1.4.1.562.36.2.1.127.5.1.1 | RowmscGsmCsV42RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmCsV42 component. |
| 1.3.6.1.4.1.562.36.2.1.127.5.1.1.1 | ColumnmscGsmCsV42RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmCsV42 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.127.5.1.1.2 | ColumnmscGsmCsV42ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.127.5.1.1.4 | ColumnmscGsmCsV42StorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmCsV42 tables. |
| 1.3.6.1.4.1.562.36.2.1.127.5.1.1.10 | ColumnmscGsmCsV42Index | not-accessible | mandatory | This variable represents the index for the mscGsmCsV42 tables. |
| 1.3.6.1.4.1.562.36.2.1.127.5.10 | TablemscGsmCsV42ProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the V.42 protocol for this particular GsmIwfCallServer. Changes to these attributes do not effect existing… |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1 | RowmscGsmCsV42ProvEntry | not-accessible | mandatory | An entry in the mscGsmCsV42ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.1 | ColumnmscGsmCsV42T400DetectTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP i… |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.2 | ColumnmscGsmCsV42T401AckTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF waits for an acknowledgment before retransmitting a frame. Since information about the T401 ti… |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.3 | ColumnmscGsmCsV42T402AckDelayTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF may wait following the receipt of any frame requiring a reply before it initiates transmission… |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.4 | ColumnmscGsmCsV42T403IdleProbeTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF allows to elapse without frames being exchanged. The link is permitted to remain idle with no … |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.5 | ColumnmscGsmCsV42TxN401FrameSize | read-write | mandatory | This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) f… |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.6 | ColumnmscGsmCsV42RxN401FrameSize | read-write | mandatory | This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) f… |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.7 | ColumnmscGsmCsV42TxKwindowSize | read-write | mandatory | This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the remote entity. The default value… |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.8 | ColumnmscGsmCsV42RxKwindowSize | read-write | mandatory | This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity to the IWF. The default value… |
| 1.3.6.1.4.1.562.36.2.1.127.5.10.1.9 | ColumnmscGsmCsV42N400RetransLimit | read-write | mandatory | This attribute specifies the maximum number of times the IWF retransmits a frame upon expiry of t401AckTimer before appropriate recovery action is taken. Infor… |
| 1.3.6.1.4.1.562.36.2.1.127.6 | NodemscGsmCsV42bis | |||
| 1.3.6.1.4.1.562.36.2.1.127.6.1 | TablemscGsmCsV42bisRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmCsV42bis components. |
| 1.3.6.1.4.1.562.36.2.1.127.6.1.1 | RowmscGsmCsV42bisRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmCsV42bis component. |
| 1.3.6.1.4.1.562.36.2.1.127.6.1.1.1 | ColumnmscGsmCsV42bisRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmCsV42bis components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.127.6.1.1.2 | ColumnmscGsmCsV42bisComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.127.6.1.1.4 | ColumnmscGsmCsV42bisStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmCsV42bis tables. |
| 1.3.6.1.4.1.562.36.2.1.127.6.1.1.10 | ColumnmscGsmCsV42bisIndex | not-accessible | mandatory | This variable represents the index for the mscGsmCsV42bis tables. |
| 1.3.6.1.4.1.562.36.2.1.127.6.10 | TablemscGsmCsV42bisProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the V.42bis data compression protocol parameters used for the calls set up by this particular GsmIwfCallSe… |
| 1.3.6.1.4.1.562.36.2.1.127.6.10.1 | RowmscGsmCsV42bisProvEntry | not-accessible | mandatory | An entry in the mscGsmCsV42bisProvTable. |
| 1.3.6.1.4.1.562.36.2.1.127.6.10.1.1 | ColumnmscGsmCsV42bisCompressionDirection | read-write | mandatory | This attribute specifies the V.42bis data compression direction to be supported. The value for compression direction is negotiated at link setup by the data li… |
| 1.3.6.1.4.1.562.36.2.1.127.6.10.1.2 | ColumnmscGsmCsV42bisMaximumCodewords | read-write | mandatory | This attribute specifies the maximum number of V.42bis codewords the IWF supports. A codeword is a binary number that represents a string of characters in comp… |
| 1.3.6.1.4.1.562.36.2.1.127.6.10.1.3 | ColumnmscGsmCsV42bisMaximumStringSize | read-write | mandatory | This attribute specifies the maximum number of characters allowed in a string represented by a codeword that the IWF supports. Each codeword in a V.42bis dicti… |
| 1.3.6.1.4.1.562.36.2.1.127.6.10.1.4 | ColumnmscGsmCsV42bisActionOnError | read-write | mandatory | This attribute specifies whether or not V.42bis takes down the call or resets the link when any of the following errors occur: 1.Receipt of STEPUP (step up cod… |
| 1.3.6.1.4.1.562.36.2.1.127.7 | NodemscGsmCsLp | |||
| 1.3.6.1.4.1.562.36.2.1.127.7.1 | TablemscGsmCsLpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmCsLp components. |
| 1.3.6.1.4.1.562.36.2.1.127.7.1.1 | RowmscGsmCsLpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmCsLp component. |
| 1.3.6.1.4.1.562.36.2.1.127.7.1.1.1 | ColumnmscGsmCsLpRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscGsmCsLp components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.127.7.1.1.2 | ColumnmscGsmCsLpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.127.7.1.1.4 | ColumnmscGsmCsLpStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmCsLp tables. |
| 1.3.6.1.4.1.562.36.2.1.127.7.1.1.10 | ColumnmscGsmCsLpIndex | not-accessible | mandatory | This variable represents the index for the mscGsmCsLp tables. |
| 1.3.6.1.4.1.562.36.2.1.127.7.10 | TablemscGsmCsLpOperTable | not-accessible | mandatory | This group contains operational attributes pertaining to information about GsmIwfBearerChannels and logical processors associated with a GsmIwfCallServer from … |
| 1.3.6.1.4.1.562.36.2.1.127.7.10.1 | RowmscGsmCsLpOperEntry | not-accessible | mandatory | An entry in the mscGsmCsLpOperTable. |
| 1.3.6.1.4.1.562.36.2.1.127.7.10.1.1 | ColumnmscGsmCsLpConfiguredBearerChannels | read-only | mandatory | This attribute indicates the number of GsmIwfBearerChannel components provisioned for the Logical Processor represented by this component. |
| 1.3.6.1.4.1.562.36.2.1.127.7.10.1.2 | ColumnmscGsmCsLpActiveCalls | read-only | mandatory | This attribute indicates the number of GsmIwfBearerChannel components currently active on this LogicalProcessor. |
| 1.3.6.1.4.1.562.36.2.1.127.7.10.1.3 | ColumnmscGsmCsLpAssignedCapacity | read-only | mandatory | This attribute indicates what percentage (0 to 100%) of a given LogicalProcessor has been reserved for the data calls which are currently active. When the assi… |
| 1.3.6.1.4.1.562.36.2.1.127.7.10.1.4 | ColumnmscGsmCsLpModemsSupported | read-only | mandatory | This attribute indicates if modems are supported with this LogicalProcessor. |
| 1.3.6.1.4.1.562.36.2.1.127.100 | TablemscGsmCsProvTable | not-accessible | mandatory | This group contains general provisioning data for the GsmIwfCallServer that does not fit within other provisioning groups. |
| 1.3.6.1.4.1.562.36.2.1.127.100.1 | RowmscGsmCsProvEntry | not-accessible | mandatory | An entry in the mscGsmCsProvTable. |
| 1.3.6.1.4.1.562.36.2.1.127.100.1.1 | ColumnmscGsmCsCommentText | read-write | mandatory | Use of this attribute is at the discretion of the system administrator. Typically, this attribute specifies the name of the trunk group at the Mobile Services-… |
| 1.3.6.1.4.1.562.36.2.1.127.100.1.2 | ColumnmscGsmCsMscIpAddress | read-write | mandatory | This attribute specifies the Internetwork Protocol (IP) Address of the Mobile Services-switching Center (MSC) Control Module (CM) that is permitted to set up G… |
| 1.3.6.1.4.1.562.36.2.1.127.100.1.4 | ColumnmscGsmCsVirtualRouterName | read-write | mandatory | This attribute specifies the VirtualRouter that this GsmIwfCallServer uses to transmit signaling messages to and receive signaling messages from the Mobile Ser… |
| 1.3.6.1.4.1.562.36.2.1.127.100.1.5 | ColumnmscGsmCsVoiceLaw | read-write | mandatory | This attribute specifies the voice law to be established for the IWF to Public Switched Telephone Network (PSTN) modem link for calls established by this GsmIw… |
| 1.3.6.1.4.1.562.36.2.1.127.103 | TablemscGsmCsCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.127.103.1 | RowmscGsmCsCidDataEntry | not-accessible | mandatory | An entry in the mscGsmCsCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.127.103.1.1 | ColumnmscGsmCsCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.127.104 | TablemscGsmCsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.127.104.1 | RowmscGsmCsStateEntry | not-accessible | mandatory | An entry in the mscGsmCsStateTable. |
| 1.3.6.1.4.1.562.36.2.1.127.104.1.1 | ColumnmscGsmCsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.127.104.1.2 | ColumnmscGsmCsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.127.104.1.3 | ColumnmscGsmCsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.127.121 | TablemscGsmCsStatsTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of this particular GsmIwfCallServer. |
| 1.3.6.1.4.1.562.36.2.1.127.121.1 | RowmscGsmCsStatsEntry | not-accessible | mandatory | An entry in the mscGsmCsStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.1 | ColumnmscGsmCsCurrentCalls | read-only | mandatory | This attribute indicates the number of active calls currently serviced by this particular GsmIwfCallServer. |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.2 | ColumnmscGsmCsCallsRequested | read-only | mandatory | This attribute counts the number of IWF call setup requests received at this particular GsmIwfCallServer from the Mobile Services- switching Center (MSC). The … |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.3 | ColumnmscGsmCsCallsSetup | read-only | mandatory | This attribute counts the number of IWF calls successfully setup by this particular GsmIwfCallServer. A call is considered setup when the IWF-Setup-Request mes… |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.4 | ColumnmscGsmCsCallsActivated | read-only | mandatory | This attribute counts the number of IWF calls successfully activated by this particular GsmIwfCallServer. A call is considered activated when the IWF receives … |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.5 | ColumnmscGsmCsCallsReleasedNormal | read-only | mandatory | This attribute counts the number of IWF calls that have completed successfully on this particular GsmIwfCallServer. The counter wraps when it exceeds the maxim… |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.6 | ColumnmscGsmCsCallsReleasedAbnormal | read-only | mandatory | This attribute counts the number of IWF calls that have been released due to error conditions at this particular GsmIwfCallServer or one if its GsmIwfBearerCha… |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.7 | ColumnmscGsmCsChannelConfigChanges | read-only | mandatory | This attribute counts the number of channel configuration requests from the Mobile-services Switching Center (MSC) that have been received at this GsmIwfCallSe… |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.8 | ColumnmscGsmCsChannelModeModifyRequests | read-only | mandatory | This attribute counts the number of channel mode modify requests that have been generated by fax calls serviced by this particular GsmIwfCallServer. The counte… |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.9 | ColumnmscGsmCsStatusMessagesRx | read-only | mandatory | This attribute counts the number of status messages received from the Mobile Services-switching Center (MSC). The counter wraps when it exceeds the maximum val… |
| 1.3.6.1.4.1.562.36.2.1.127.121.1.10 | ColumnmscGsmCsErroredMipFrames | read-only | mandatory | This attribute counts the number of MSC/IWF Interface Protocol (MIP) messages received from the Mobile Services-switching Center (MSC) that were in error. The … |
| 1.3.6.1.4.1.562.36.2.1.128 | NodemscGsmBc | |||
| 1.3.6.1.4.1.562.36.2.1.128.1 | TablemscGsmBcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBc components. |
| 1.3.6.1.4.1.562.36.2.1.128.1.1 | RowmscGsmBcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBc component. |
| 1.3.6.1.4.1.562.36.2.1.128.1.1.1 | ColumnmscGsmBcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscGsmBc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.1.1.2 | ColumnmscGsmBcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.1.1.4 | ColumnmscGsmBcStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBc tables. |
| 1.3.6.1.4.1.562.36.2.1.128.1.1.10 | ColumnmscGsmBcTrunkGrpIndex | not-accessible | mandatory | This variable represents an index for the mscGsmBc tables. |
| 1.3.6.1.4.1.562.36.2.1.128.1.1.11 | ColumnmscGsmBcCicIndex | not-accessible | mandatory | This variable represents an index for the mscGsmBc tables. |
| 1.3.6.1.4.1.562.36.2.1.128.2 | NodemscGsmBcFramer | |||
| 1.3.6.1.4.1.562.36.2.1.128.2.1 | TablemscGsmBcFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcFramer components. |
| 1.3.6.1.4.1.562.36.2.1.128.2.1.1 | RowmscGsmBcFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcFramer component. |
| 1.3.6.1.4.1.562.36.2.1.128.2.1.1.1 | ColumnmscGsmBcFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.2.1.1.2 | ColumnmscGsmBcFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.2.1.1.4 | ColumnmscGsmBcFramerStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.128.2.1.1.10 | ColumnmscGsmBcFramerIndex | not-accessible | mandatory | This variable represents the index for the mscGsmBcFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.128.2.10 | TablemscGsmBcFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.36.2.1.128.2.10.1 | RowmscGsmBcFramerProvEntry | not-accessible | mandatory | An entry in the mscGsmBcFramerProvTable. |
| 1.3.6.1.4.1.562.36.2.1.128.2.10.1.1 | ColumnmscGsmBcFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.36.2.1.128.2.11 | TablemscGsmBcFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1 | RowmscGsmBcFramerStatsEntry | not-accessible | mandatory | An entry in the mscGsmBcFramerStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1.1 | ColumnmscGsmBcFramerFrmToIf | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by Framer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1.2 | ColumnmscGsmBcFramerFrmFromIf | read-only | mandatory | This attribute counts the number of frames received from the link interface by Framer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1.3 | ColumnmscGsmBcFramerOctetFromIf | read-only | mandatory | This attribute counts the number of bytes received from the link interface by Framer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1.5 | ColumnmscGsmBcFramerCrcErrors | read-only | mandatory | This attribute coutns the the total number of frames with CRC errors, occurring in the receive direction from the link. The counter wraps when it exceeds the m… |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1.6 | ColumnmscGsmBcFramerLrcErrors | read-only | mandatory | This attribute counts the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. The counter wraps when it excee… |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1.7 | ColumnmscGsmBcFramerNonOctetErrors | read-only | mandatory | This attribute counts the total number of frames that were non octet aligned. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1.8 | ColumnmscGsmBcFramerOverruns | read-only | mandatory | This attribute counts the total number of frames received from the link for which overruns occurred. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.2.11.1.9 | ColumnmscGsmBcFramerUnderruns | read-only | mandatory | This attributecounts the total number of frames transmitted to the link for which underruns occurred. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.2.12 | TablemscGsmBcFramerLinkTable | not-accessible | mandatory | This group contains provisionable attributes for the GsmIwfFramer which controls link layer framing for application components sending and receiving data on a … |
| 1.3.6.1.4.1.562.36.2.1.128.2.12.1 | RowmscGsmBcFramerLinkEntry | not-accessible | mandatory | An entry in the mscGsmBcFramerLinkTable. |
| 1.3.6.1.4.1.562.36.2.1.128.2.12.1.1 | ColumnmscGsmBcFramerFramingType | read-write | mandatory | This attribute indicates the type of framing for the link layer data received and transmitted on this channel. Valid values are: BtdsFraming, bit transparent f… |
| 1.3.6.1.4.1.562.36.2.1.128.2.13 | TablemscGsmBcFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.128.2.13.1 | RowmscGsmBcFramerStateEntry | not-accessible | mandatory | An entry in the mscGsmBcFramerStateTable. |
| 1.3.6.1.4.1.562.36.2.1.128.2.13.1.1 | ColumnmscGsmBcFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.128.2.13.1.2 | ColumnmscGsmBcFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.128.2.13.1.3 | ColumnmscGsmBcFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.128.3 | NodemscGsmBcLayer1 | |||
| 1.3.6.1.4.1.562.36.2.1.128.3.1 | TablemscGsmBcLayer1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcLayer1 components. |
| 1.3.6.1.4.1.562.36.2.1.128.3.1.1 | RowmscGsmBcLayer1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcLayer1 component. |
| 1.3.6.1.4.1.562.36.2.1.128.3.1.1.1 | ColumnmscGsmBcLayer1RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcLayer1 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.3.1.1.2 | ColumnmscGsmBcLayer1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.3.1.1.4 | ColumnmscGsmBcLayer1StorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcLayer1 tables. |
| 1.3.6.1.4.1.562.36.2.1.128.3.1.1.10 | ColumnmscGsmBcLayer1Index | not-accessible | mandatory | This variable represents the index for the mscGsmBcLayer1 tables. |
| 1.3.6.1.4.1.562.36.2.1.128.3.10 | TablemscGsmBcLayer1OperTable | not-accessible | mandatory | This group contains physical layer operational attributes concerning the operation of this particular GsmIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.128.3.10.1 | RowmscGsmBcLayer1OperEntry | not-accessible | mandatory | An entry in the mscGsmBcLayer1OperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.3.10.1.1 | ColumnmscGsmBcLayer1ActiveMode | read-only | mandatory | This attribute indicates the active physical layer protocol between the mobile and the IWF. Valid values are: v110, GSM V.110 rate adaptation scheme for interw… |
| 1.3.6.1.4.1.562.36.2.1.128.3.10.1.2 | ColumnmscGsmBcLayer1Connection | read-only | mandatory | This attribute indicates the connection between the mobile and the IWF. Valid values are: transparent, Constant throughput, constant transit delay, and variabl… |
| 1.3.6.1.4.1.562.36.2.1.128.3.10.1.3 | ColumnmscGsmBcLayer1DataRate | read-only | mandatory | This attribute indicates the layer 1 user data rate for the currently active call for this GsmIwfBearerChannel. This is the data rate between the mobile and IW… |
| 1.3.6.1.4.1.562.36.2.1.128.3.10.1.10 | ColumnmscGsmBcLayer1IntermediateRate | read-only | mandatory | This attribute indicates the intermediate rate used in the physical layer rate adaptation process. This field is valid between the mobile and the IWF. For user… |
| 1.3.6.1.4.1.562.36.2.1.128.3.11 | TablemscGsmBcLayer1StatsTable | not-accessible | mandatory | This group contains physical layer statistics concerning the operation of this particular GsmIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1 | RowmscGsmBcLayer1StatsEntry | not-accessible | mandatory | An entry in the mscGsmBcLayer1StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.1 | ColumnmscGsmBcLayer1FramesTx | read-only | mandatory | This attribute counts the number of frames transmitted on the link. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.2 | ColumnmscGsmBcLayer1FramesRx | read-only | mandatory | This attribute counts the number of frames received on the link. Discarded frames are not included in this count. The counter wraps when it exceeds the maximum… |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.3 | ColumnmscGsmBcLayer1BytesTx | read-only | mandatory | This attribute counts number of bytes transmitted on the link. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.4 | ColumnmscGsmBcLayer1BytesRx | read-only | mandatory | This attribute counts the number of bytes received on the link. Bytes from discarded frames are not included in this count. The counter wraps when it exceeds t… |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.5 | ColumnmscGsmBcLayer1UnderRunsTx | read-only | mandatory | This attribute counts number of underruns, on a per-call basis, in the transmit direction reported by the hardware on the mobile-side.. These frames are not co… |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.6 | ColumnmscGsmBcLayer1OverRunsRx | read-only | mandatory | This attribute counts number of overruns, on a per-call basis, in the receive direction reported by the hardware on the mobile-side. These frames are discarded… |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.7 | ColumnmscGsmBcLayer1NonOctetErrorsRx | read-only | mandatory | This attribute counts the number of non-octet synchronous frame errors, on a per-call basis, received on the link reported by the hardware. This is when a fram… |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.8 | ColumnmscGsmBcLayer1LargeFrameErrorsRx | read-only | mandatory | This attribute counts the number of frames, on a per-call basis, received on the link that exceeded internal buffer limits reported by the hardware. A large nu… |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.9 | ColumnmscGsmBcLayer1FramesDiscarded | read-only | mandatory | This attribute counts the number of frames discarded, on a per-call basis, in the receive direction by software due to frame errors. The counter wraps when it … |
| 1.3.6.1.4.1.562.36.2.1.128.3.11.1.10 | ColumnmscGsmBcLayer1LrcErrorsTx | read-only | mandatory | This attribute counts the number of corrupted frames, on a per-call basis, due to memory inconsistencies found by Longitude Redundancy Check (LRC) checks at th… |
| 1.3.6.1.4.1.562.36.2.1.128.4 | NodemscGsmBcModem | |||
| 1.3.6.1.4.1.562.36.2.1.128.4.1 | TablemscGsmBcModemRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcModem components. |
| 1.3.6.1.4.1.562.36.2.1.128.4.1.1 | RowmscGsmBcModemRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcModem component. |
| 1.3.6.1.4.1.562.36.2.1.128.4.1.1.1 | ColumnmscGsmBcModemRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcModem components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.4.1.1.2 | ColumnmscGsmBcModemComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.4.1.1.4 | ColumnmscGsmBcModemStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcModem tables. |
| 1.3.6.1.4.1.562.36.2.1.128.4.1.1.10 | ColumnmscGsmBcModemIndex | not-accessible | mandatory | This variable represents the index for the mscGsmBcModem tables. |
| 1.3.6.1.4.1.562.36.2.1.128.4.10 | TablemscGsmBcModemOperTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the modem component for this particular GsmIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1 | RowmscGsmBcModemOperEntry | not-accessible | mandatory | An entry in the mscGsmBcModemOperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.2 | ColumnmscGsmBcModemRate | read-only | mandatory | This attribute indicates the transmission rate of the current modem in use. A rate of 1200_75 is 75 bit/s in the transmit direction and 1200 bit/s in the recei… |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.3 | ColumnmscGsmBcModemAlgorithmInUse | read-only | mandatory | This attribute indicates the current modem algorithm(s) active for the channel. Valid values are: v17, V.17 is active.V.17 is an ITU-T 14400bit/s modem standar… |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.4 | ColumnmscGsmBcModemProtocolState | read-only | mandatory | This attribute indicates the active protocol state of the modem in use.Valid values are: idle, Modem is in an inactive state and has no current connection esta… |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.5 | ColumnmscGsmBcModemReceiverTransmitter | read-only | mandatory | This attribute indicates whether the fax data modem is in receive or transmit mode. If this is not a fax data modem call, then the value is set to notApplicabl… |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.6 | ColumnmscGsmBcModemTraining | read-only | mandatory | This attribute indicates the training procedure used by the V.17 modems. ITU-T defines two training procedures. A longer training procedure used at call setup,… |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.8 | ColumnmscGsmBcModemToUpperFlowControlActive | read-only | mandatory | This attribute indicates whether flow control was requested and an indication was sent to an upper layer protocol. |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.9 | ColumnmscGsmBcModemToDspFlowControlActive | read-only | mandatory | This attribute indicates whether an upper layer protocol requested flow control and an indication was sent to the Digital Signal Processor. |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.10 | ColumnmscGsmBcModemAsyncMode | read-only | mandatory | This attribute indicates whether conversion between synchronous and asynchronous data format (specifacally, the stripping or insertion of start and stop bits) … |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.11 | ColumnmscGsmBcModemAutoHdlcMode | read-only | mandatory | This attribute indicates whether High-Level Data Link Control (HDLC) functions are being performed by the modem to support HDLC applications (V.42 for example). |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.12 | ColumnmscGsmBcModemOutbandFlowControl | read-only | mandatory | This attribute indicates whether inband or outband flow control conversions are being performed. The modem performs either inband or outband flow control unles… |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.13 | ColumnmscGsmBcModemOutbandBreak | read-only | mandatory | This attribute indicates whether inband or outband break control conversions are being performed. This is when the modem detects a break condition as defined b… |
| 1.3.6.1.4.1.562.36.2.1.128.4.10.1.14 | ColumnmscGsmBcModemAutobaud | read-only | mandatory | This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the MSC on: What is the initial modem data rate value and Wh… |
| 1.3.6.1.4.1.562.36.2.1.128.4.11 | TablemscGsmBcModemStatsTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the modem component for this particular GsmIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.128.4.11.1 | RowmscGsmBcModemStatsEntry | not-accessible | mandatory | An entry in the mscGsmBcModemStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.4.11.1.1 | ColumnmscGsmBcModemBytesTx | read-only | mandatory | This attribute counts the number of payload bytes transmitted. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.4.11.1.2 | ColumnmscGsmBcModemBytesRx | read-only | mandatory | This attribute counts the number of payload bytes received. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.4.11.1.6 | ColumnmscGsmBcModemFramingErrors | read-only | mandatory | This attribute counts the number of framing errors detected by the hardware. This is the absence of a stop bit after a start bit and eight bits of data. All in… |
| 1.3.6.1.4.1.562.36.2.1.128.5 | NodemscGsmBcV110 | |||
| 1.3.6.1.4.1.562.36.2.1.128.5.1 | TablemscGsmBcV110RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcV110 components. |
| 1.3.6.1.4.1.562.36.2.1.128.5.1.1 | RowmscGsmBcV110RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcV110 component. |
| 1.3.6.1.4.1.562.36.2.1.128.5.1.1.1 | ColumnmscGsmBcV110RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcV110 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.5.1.1.2 | ColumnmscGsmBcV110ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.5.1.1.4 | ColumnmscGsmBcV110StorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcV110 tables. |
| 1.3.6.1.4.1.562.36.2.1.128.5.1.1.10 | ColumnmscGsmBcV110Index | not-accessible | mandatory | This variable represents the index for the mscGsmBcV110 tables. |
| 1.3.6.1.4.1.562.36.2.1.128.5.10 | TablemscGsmBcV110OperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of V110. |
| 1.3.6.1.4.1.562.36.2.1.128.5.10.1 | RowmscGsmBcV110OperEntry | not-accessible | mandatory | An entry in the mscGsmBcV110OperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.5.10.1.2 | ColumnmscGsmBcV110DataRate | read-only | mandatory | This attribute contains the layer 1 user data rate for the currently active call for this GsmIwfBearerChannel. This is the data rate between the IWF and the fi… |
| 1.3.6.1.4.1.562.36.2.1.128.5.10.1.9 | ColumnmscGsmBcV110IntermediateRate | read-only | mandatory | This attribute indicates the intermediate rate used in the physical layer rate adaptation process. This field is valid between the network and the IWF. For use… |
| 1.3.6.1.4.1.562.36.2.1.128.5.11 | TablemscGsmBcV110StatsTable | not-accessible | mandatory | This group contains statistical attributes which measure the performance of V110. |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1 | RowmscGsmBcV110StatsEntry | not-accessible | mandatory | An entry in the mscGsmBcV110StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.1 | ColumnmscGsmBcV110FramesTx | read-only | mandatory | This attribute counts the number of frames transmitted on the link. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.2 | ColumnmscGsmBcV110FramesRx | read-only | mandatory | This attribute counts the number of frames received on the link. Discarded frames are not included in this count. The counter wraps when it exceeds the maximum… |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.3 | ColumnmscGsmBcV110BytesTx | read-only | mandatory | This attribute counts the number of bytes transmitted on the link. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.4 | ColumnmscGsmBcV110BytesRx | read-only | mandatory | This attribute counts the number of bytes received on the link. Bytes from discarded frames are not included in this count. The counter wraps when it exceeds t… |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.5 | ColumnmscGsmBcV110UnderRunsTx | read-only | mandatory | This attribute counts the number of underruns, on a per-call basis, in the transmit direction reported by the hardware on the network side. These frames are no… |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.6 | ColumnmscGsmBcV110OverRunsRx | read-only | mandatory | This attribute counts the number of overruns, on a per-call basis, in the receive direction reported by the hardware on the network side. These frames are disc… |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.7 | ColumnmscGsmBcV110NonOctetErrorsRx | read-only | mandatory | This attribute counts the number of non-octet synchronous frame errors, on a per-call basis, received on the link reported by the hardware. These frames are di… |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.8 | ColumnmscGsmBcV110LargeFrameErrorsRx | read-only | mandatory | This attribute counts the number of frames received on the link that exceeded internal buffer limits reported by the hardware, on a per- call basis. These fram… |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.9 | ColumnmscGsmBcV110FramesDiscarded | read-only | mandatory | This attribute counts the number of frames discarded, on a per-call basis, in the receive direction by software due to frame errors. The counter wraps when it … |
| 1.3.6.1.4.1.562.36.2.1.128.5.11.1.10 | ColumnmscGsmBcV110LrcErrorsTx | read-only | mandatory | This attribute counts the number of corrupted frames, on a per-call basis, due to memory inconsistencies found by Longitude Redundancy Check (LRC) checks at th… |
| 1.3.6.1.4.1.562.36.2.1.128.6 | NodemscGsmBcFax | |||
| 1.3.6.1.4.1.562.36.2.1.128.6.1 | TablemscGsmBcFaxRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcFax components. |
| 1.3.6.1.4.1.562.36.2.1.128.6.1.1 | RowmscGsmBcFaxRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcFax component. |
| 1.3.6.1.4.1.562.36.2.1.128.6.1.1.1 | ColumnmscGsmBcFaxRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcFax components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.6.1.1.2 | ColumnmscGsmBcFaxComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.6.1.1.4 | ColumnmscGsmBcFaxStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcFax tables. |
| 1.3.6.1.4.1.562.36.2.1.128.6.1.1.10 | ColumnmscGsmBcFaxIndex | not-accessible | mandatory | This variable represents the index for the mscGsmBcFax tables. |
| 1.3.6.1.4.1.562.36.2.1.128.6.10 | TablemscGsmBcFaxOperTable | not-accessible | mandatory | This group contains operational attributes which measure the performance of the fax protocol. |
| 1.3.6.1.4.1.562.36.2.1.128.6.10.1 | RowmscGsmBcFaxOperEntry | not-accessible | mandatory | An entry in the mscGsmBcFaxOperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.6.10.1.1 | ColumnmscGsmBcFaxActiveMode | read-only | mandatory | This attribute indicates the mode of the fax T.30 protocol, determined during Exchange Identification (XID) negotiations. The following modes are supported: no… |
| 1.3.6.1.4.1.562.36.2.1.128.6.10.1.2 | ColumnmscGsmBcFaxProtocolState | read-only | mandatory | This attribute indicates the protocol state of the fax adaptor. The values are: setup, call setup state idle, idle state only transmitting Synchronize (SYNC) f… |
| 1.3.6.1.4.1.562.36.2.1.128.6.10.1.3 | ColumnmscGsmBcFaxMessageRate | read-only | mandatory | This attribute indicates the fax message rate used for sending fax documents. |
| 1.3.6.1.4.1.562.36.2.1.128.6.11 | TablemscGsmBcFaxStatsTable | not-accessible | mandatory | This group contains statistical attributes which measure the performance of the fax protocol. |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1 | RowmscGsmBcFaxStatsEntry | not-accessible | mandatory | An entry in the mscGsmBcFaxStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1.1 | ColumnmscGsmBcFaxMessageFramesRx | read-only | mandatory | This attribute counts the number of fax message frames received from the mobile. One fax message frame is an eight byte DATA frame defined in GSM 3.45. The cou… |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1.2 | ColumnmscGsmBcFaxMessageFramesTx | read-only | mandatory | This attribute counts the number of fax message frames transmitted to the mobile. One fax message frame is an eight byte DATA frame defined in GSM 3.45. The co… |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1.3 | ColumnmscGsmBcFaxBcsFramesRx | read-only | mandatory | This attribute counts the number of fax Binary Coded Signal (BCS) frames received from the mobile. A fax BCS frame is an 8-byte STATUS frame, which carries T.3… |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1.4 | ColumnmscGsmBcFaxBcsFramesTx | read-only | mandatory | This attribute counts the number of fax Binary Coded Signal (BCS) frames transmitted to the mobile. A fax BCS frame is an 8-byte STATUS frame, which carries T.… |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1.5 | ColumnmscGsmBcFaxPagesRxFromMobile | read-only | mandatory | This attribute counts the number of fax pages received from the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1.6 | ColumnmscGsmBcFaxPagesTxToMobile | read-only | mandatory | The attribute counts the number of fax pages transmitted to the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1.7 | ColumnmscGsmBcFaxChannelModeModify | read-only | mandatory | This attribute counts the number of Channel Mode Modify (CMM) requests initiated by the IWF. For transparent fax calls, the transmission speed is determined by… |
| 1.3.6.1.4.1.562.36.2.1.128.6.11.1.8 | ColumnmscGsmBcFaxBcsFrameErrors | read-only | mandatory | This attribute counts the number of fax Binary Coded Signal (BCS) frames in error. This attribute indicates the count of corrupted fax BCS frames over the GSM … |
| 1.3.6.1.4.1.562.36.2.1.128.7 | NodemscGsmBcRlp | |||
| 1.3.6.1.4.1.562.36.2.1.128.7.1 | TablemscGsmBcRlpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcRlp components. |
| 1.3.6.1.4.1.562.36.2.1.128.7.1.1 | RowmscGsmBcRlpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcRlp component. |
| 1.3.6.1.4.1.562.36.2.1.128.7.1.1.1 | ColumnmscGsmBcRlpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcRlp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.7.1.1.2 | ColumnmscGsmBcRlpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.7.1.1.4 | ColumnmscGsmBcRlpStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcRlp tables. |
| 1.3.6.1.4.1.562.36.2.1.128.7.1.1.10 | ColumnmscGsmBcRlpIndex | not-accessible | mandatory | This variable represents the index for the mscGsmBcRlp tables. |
| 1.3.6.1.4.1.562.36.2.1.128.7.10 | TablemscGsmBcRlpOperTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the GsmIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1 | RowmscGsmBcRlpOperEntry | not-accessible | mandatory | An entry in the mscGsmBcRlpOperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1.1 | ColumnmscGsmBcRlpProtocolState | read-only | mandatory | This attribute indicates the last Radio Link Protocol (RLP) state before call take down. The following are the states: detached, Initial State. The call has no… |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1.2 | ColumnmscGsmBcRlpFrameSize | read-only | mandatory | This attribute indicates the current Radio Link Protocol (RLP) frame size transmitted. The size of the frame depends on the radio channel type. The frames can … |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1.3 | ColumnmscGsmBcRlpHighestVersion | read-only | mandatory | This attribute indicates the current highest version of the Radio Link Protocol (RLP) protocol negotiated by the Radio Link Protocol (RLP), during Exchange Inf… |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1.4 | ColumnmscGsmBcRlpIwfToMsWindowSize | read-only | mandatory | This attribute indicates the current IWF to mobile window size negotiated by the Radio Link Protocol (RLP) during Exchange Information (XID). The window size i… |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1.5 | ColumnmscGsmBcRlpMsToIwfWindowSize | read-only | mandatory | This attribute indicates the current mobile to IWF window size negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). The window size … |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1.6 | ColumnmscGsmBcRlpT1AckTimer | read-only | mandatory | This attribute indicates the current T1 timer negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the period in millisecond… |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1.7 | ColumnmscGsmBcRlpT2AckDelayTimer | read-only | mandatory | This attribute indicates the current T2 timer negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the maximum period in mil… |
| 1.3.6.1.4.1.562.36.2.1.128.7.10.1.8 | ColumnmscGsmBcRlpN2RetransmitCount | read-write | mandatory | This attribute indicates the current value of N2 negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the maximum number of … |
| 1.3.6.1.4.1.562.36.2.1.128.7.11 | TablemscGsmBcRlpStatsTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the GsmIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1 | RowmscGsmBcRlpStatsEntry | not-accessible | mandatory | An entry in the mscGsmBcRlpStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.1 | ColumnmscGsmBcRlpIFramesTx | read-only | mandatory | This attribute counts the number of valid Information frames transmitted. This count does not include the Information frames discarded. The counter wraps when … |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.2 | ColumnmscGsmBcRlpIFramesRx | read-only | mandatory | This attributes counts the number of valid Information (I) frames received. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.3 | ColumnmscGsmBcRlpFramesRetransmitted | read-only | mandatory | This attribute counts the total number of frames retransmitted. Frames that are not acknowledged within the T1 timer are retransmitted. The counter wraps when … |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.4 | ColumnmscGsmBcRlpT1AckTimeouts | read-only | mandatory | This attribute counts the total number of T1 timer time-outs. Retransmission of all unacknowledged frames is started after T1 timer expiry. The counter wraps w… |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.5 | ColumnmscGsmBcRlpInvalidFrames | read-only | mandatory | This attribute counts the number of invalid frames received. These invalid frames are frames received from the mobile which contain errors in the header inform… |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.6 | ColumnmscGsmBcRlpCrcErrorsRx | read-only | mandatory | This attribute counts the number of frames with Cyclic Redundancy Check (CRC) errors received by the IWF Radio Link Protocol (RLP) entity. CRC is a type of blo… |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.7 | ColumnmscGsmBcRlpOutOfSequenceFrames | read-only | mandatory | This attribute counts the number of out-of-sequence Information frames received by the IWF Radio Link Protocol (RLP) entity. The counter wraps when it exceeds … |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.8 | ColumnmscGsmBcRlpRemoteBusyIndications | read-only | mandatory | This attribute counts the number of times the mobile Radio Link Protocol (RLP) entity is busy (that is, it is in Asynchronous Balanced Mode (ABM) and is not re… |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.9 | ColumnmscGsmBcRlpLocalBusyIndications | read-only | mandatory | This attribute counts the number of times the IWF RLP entity is busy (that is it is in Asynchronous Balanced Mode (ABM) and is not ready to receive Information… |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.10 | ColumnmscGsmBcRlpIFramesTxDiscarded | read-only | mandatory | This attribute counts the number of frames discarded by the IWF. Untransmitted and unacknowledged frames are discarded when a Set Asynchronous Balanced Mode (S… |
| 1.3.6.1.4.1.562.36.2.1.128.7.11.1.11 | ColumnmscGsmBcRlpResetsRx | read-only | mandatory | This attribute counts the number of resets sent by the mobile. Loss of information may occur when a reset is issued. A reset is issued by the mobile on failure… |
| 1.3.6.1.4.1.562.36.2.1.128.8 | NodemscGsmBcV42 | |||
| 1.3.6.1.4.1.562.36.2.1.128.8.1 | TablemscGsmBcV42RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcV42 components. |
| 1.3.6.1.4.1.562.36.2.1.128.8.1.1 | RowmscGsmBcV42RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcV42 component. |
| 1.3.6.1.4.1.562.36.2.1.128.8.1.1.1 | ColumnmscGsmBcV42RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcV42 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.8.1.1.2 | ColumnmscGsmBcV42ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.8.1.1.4 | ColumnmscGsmBcV42StorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcV42 tables. |
| 1.3.6.1.4.1.562.36.2.1.128.8.1.1.10 | ColumnmscGsmBcV42Index | not-accessible | mandatory | This variable represents the index for the mscGsmBcV42 tables. |
| 1.3.6.1.4.1.562.36.2.1.128.8.10 | TablemscGsmBcV42OperTable | not-accessible | mandatory | This group contains operational attributes which measure V.42 error detection and correction performance. |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1 | RowmscGsmBcV42OperEntry | not-accessible | mandatory | An entry in the mscGsmBcV42OperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.1 | ColumnmscGsmBcV42ProtocolState | read-only | mandatory | This attribute indicates the state of V.42. Valid states are: notActive, The V.42 link connection with the Public Switched Telephoned Network) PSTN modem is no… |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.2 | ColumnmscGsmBcV42TxN401FrameSize | read-only | mandatory | This attribute indicates the current value of parameter N401 for V.42 which is negotiated during Exchange Information (XID). This is the maximum number of octe… |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.3 | ColumnmscGsmBcV42RxN401FrameSize | read-only | mandatory | This attribute indicates the current value of N401, that is negotiated during Exchange Identification (XID). This is the maximum number of octets that can be c… |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.4 | ColumnmscGsmBcV42TxKwindowSize | read-only | mandatory | This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used … |
| 1.3.6.1.4.1.562.36.2.1.128.8.10.1.5 | ColumnmscGsmBcV42RxKwindowSize | read-only | mandatory | This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used f… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11 | TablemscGsmBcV42StatsTable | not-accessible | mandatory | This group contains statistical attributes that measure the V.42 error detection and correction performance. |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1 | RowmscGsmBcV42StatsEntry | not-accessible | mandatory | An entry in the mscGsmBcV42StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.1 | ColumnmscGsmBcV42IBytesRx | read-only | mandatory | This attribute counts the total number of bytes that the V.42 actually received from the Public Switched Telephone Network (PSTN) modem in a data call. The cou… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.2 | ColumnmscGsmBcV42IBytesTx | read-only | mandatory | This attribute counts the total number of bytes that the V.42 transmitted to the Public Switched Telephone Network (PSTN) modem in a data call. The counter wra… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.3 | ColumnmscGsmBcV42IFramesRx | read-only | mandatory | This attribute counts the total number of Information (I) frames that the V.42 received from the Public Switched Telephone Network (PSTN) modem in a data call.… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.4 | ColumnmscGsmBcV42IFramesTx | read-only | mandatory | This attribute counts the total number of information frames that the V.42 transmitted to the Public Switched Telephone Network (PSTN) modem in a data call. Th… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.5 | ColumnmscGsmBcV42FramesRetransmitted | read-only | mandatory | This attribute counts the total number of frames retransmitted by the IWF V.42 entity in a data call. The V.42 retransmits the same frame when the associated T… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.6 | ColumnmscGsmBcV42T1AckTimeouts | read-only | mandatory | This attribute counts the total number of times that the T401 timer has timed out within a data call. If this timer times-out frequently, the operator may need… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.7 | ColumnmscGsmBcV42RemoteBusyIndications | read-only | mandatory | This attribute counts the total number of times the Public Switched Telephone Network (PSTN) modem enters a busy state (the IWF has received a Receive Not Read… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.8 | ColumnmscGsmBcV42LocalBusyIndications | read-only | mandatory | This attribute counts the total number of times the IWF V.42 enters in a busy condition and asks the peer to stop sending information frames until it has clear… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.9 | ColumnmscGsmBcV42BadFramesRx | read-only | mandatory | This attribute counts the total number of bad frames the IWF V.42 has received from the Public Switched Telephone Network (PSTN) remote modem within the data c… |
| 1.3.6.1.4.1.562.36.2.1.128.8.11.1.10 | ColumnmscGsmBcV42CrcErrorsRx | read-only | mandatory | This attribute counts the total number of frames received from the remote Public Switched Telephone Network (PSTN) modem that contain incorrect frame check seq… |
| 1.3.6.1.4.1.562.36.2.1.128.9 | NodemscGsmBcV42bis | |||
| 1.3.6.1.4.1.562.36.2.1.128.9.1 | TablemscGsmBcV42bisRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcV42bis components. |
| 1.3.6.1.4.1.562.36.2.1.128.9.1.1 | RowmscGsmBcV42bisRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcV42bis component. |
| 1.3.6.1.4.1.562.36.2.1.128.9.1.1.1 | ColumnmscGsmBcV42bisRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcV42bis components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.9.1.1.2 | ColumnmscGsmBcV42bisComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.9.1.1.4 | ColumnmscGsmBcV42bisStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcV42bis tables. |
| 1.3.6.1.4.1.562.36.2.1.128.9.1.1.10 | ColumnmscGsmBcV42bisIndex | not-accessible | mandatory | This variable represents the index for the mscGsmBcV42bis tables. |
| 1.3.6.1.4.1.562.36.2.1.128.9.10 | TablemscGsmBcV42bisOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of V.42bis. |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1 | RowmscGsmBcV42bisOperEntry | not-accessible | mandatory | An entry in the mscGsmBcV42bisOperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1.1 | ColumnmscGsmBcV42bisProtocolModeEncoder | read-only | mandatory | This attribute indicates the current mode of the V.42bis encoder. This mode can be either: transparent - A mode of operation in which compression has been sele… |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1.2 | ColumnmscGsmBcV42bisProtocolModeDecoder | read-only | mandatory | This attribute indicates the current mode of the V.42bis decoder. This mode can be either: transparent - A mode of operation in which compression has been sele… |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1.3 | ColumnmscGsmBcV42bisCompressionDirection | read-only | mandatory | This attribute indicates the direction in which V.42bis is active, negotiated at link setup by the data link protocol through Exchange Identification (XID) neg… |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1.4 | ColumnmscGsmBcV42bisMaximumCodewords | read-only | mandatory | This attribute indicates the maximum number of codewords in the dictionary negotiated at link setup by the data link protocol by way of the Exchange Identifica… |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1.5 | ColumnmscGsmBcV42bisMaximumStringSize | read-only | mandatory | This attribute indicates the maximum number of characters allowed in a string represented by a codeword negotiated at link setup by the data link protocol by w… |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1.6 | ColumnmscGsmBcV42bisLastDecodeError | read-only | mandatory | This attribute indicates last error found by the decoder. Error values are: none, No errors found. badStepup, Receipt of STEPUP (step up codeword size) codewor… |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1.7 | ColumnmscGsmBcV42bisCompRatioEncoder | read-only | mandatory | This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being comp… |
| 1.3.6.1.4.1.562.36.2.1.128.9.10.1.8 | ColumnmscGsmBcV42bisCompRatioDecoder | read-only | mandatory | This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being comp… |
| 1.3.6.1.4.1.562.36.2.1.128.9.11 | TablemscGsmBcV42bisStatsTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of V.42bis. |
| 1.3.6.1.4.1.562.36.2.1.128.9.11.1 | RowmscGsmBcV42bisStatsEntry | not-accessible | mandatory | An entry in the mscGsmBcV42bisStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.9.11.1.1 | ColumnmscGsmBcV42bisModeChangesEncode | read-only | mandatory | This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the encoder. The counter wraps when it e… |
| 1.3.6.1.4.1.562.36.2.1.128.9.11.1.2 | ColumnmscGsmBcV42bisModeChangesDecode | read-only | mandatory | This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the decoder. The mode changes are determ… |
| 1.3.6.1.4.1.562.36.2.1.128.9.11.1.3 | ColumnmscGsmBcV42bisResetsEncode | read-only | mandatory | This attribute counts the number of resets sent by the encoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The counter… |
| 1.3.6.1.4.1.562.36.2.1.128.9.11.1.4 | ColumnmscGsmBcV42bisResetsDecode | read-only | mandatory | This attribute counts the number of resets received by the decoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The res… |
| 1.3.6.1.4.1.562.36.2.1.128.9.11.1.5 | ColumnmscGsmBcV42bisReInitializations | read-only | mandatory | This attribute counts the number of times V.42bis is reinitialized because of a destructive break (a destructive break is a break that causes data to be discar… |
| 1.3.6.1.4.1.562.36.2.1.128.9.11.1.6 | ColumnmscGsmBcV42bisErrorsInDecode | read-only | mandatory | This attribute counts the number of errors found by the decoder. The errors could be any of the following: 1.Receipt of STEPUP (step up codeword size) codeword… |
| 1.3.6.1.4.1.562.36.2.1.128.10 | NodemscGsmBcL2RCop | |||
| 1.3.6.1.4.1.562.36.2.1.128.10.1 | TablemscGsmBcL2RCopRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcL2RCop components. |
| 1.3.6.1.4.1.562.36.2.1.128.10.1.1 | RowmscGsmBcL2RCopRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcL2RCop component. |
| 1.3.6.1.4.1.562.36.2.1.128.10.1.1.1 | ColumnmscGsmBcL2RCopRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcL2RCop components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.10.1.1.2 | ColumnmscGsmBcL2RCopComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.10.1.1.4 | ColumnmscGsmBcL2RCopStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcL2RCop tables. |
| 1.3.6.1.4.1.562.36.2.1.128.10.1.1.10 | ColumnmscGsmBcL2RCopIndex | not-accessible | mandatory | This variable represents the index for the mscGsmBcL2RCop tables. |
| 1.3.6.1.4.1.562.36.2.1.128.10.10 | TablemscGsmBcL2RCopOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of L2RCop. |
| 1.3.6.1.4.1.562.36.2.1.128.10.10.1 | RowmscGsmBcL2RCopOperEntry | not-accessible | mandatory | An entry in the mscGsmBcL2RCopOperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.10.10.1.1 | ColumnmscGsmBcL2RCopFlowControlStateTx | read-only | mandatory | This attribute indicates whether flow control is active in the transmit direction (towards the network side) for Layer2 Relay. |
| 1.3.6.1.4.1.562.36.2.1.128.10.10.1.2 | ColumnmscGsmBcL2RCopFlowControlStateRx | read-only | mandatory | This attribute indicates whether flow control is active in the receive direction (towards the mobile) for Layer2 Relay. |
| 1.3.6.1.4.1.562.36.2.1.128.10.11 | TablemscGsmBcL2RCopStatsTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of L2RCop. |
| 1.3.6.1.4.1.562.36.2.1.128.10.11.1 | RowmscGsmBcL2RCopStatsEntry | not-accessible | mandatory | An entry in the mscGsmBcL2RCopStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.10.11.1.1 | ColumnmscGsmBcL2RCopBytesTx | read-only | mandatory | This attribute counts the number of data bytes relayed by Layer2 Relay in the transmit direction (towards the network). The counter wraps when it exceeds the m… |
| 1.3.6.1.4.1.562.36.2.1.128.10.11.1.2 | ColumnmscGsmBcL2RCopBytesRx | read-only | mandatory | This attribute counts the number of data bytes relayed by Layer2 Relay in the receive direction (towards the mobile). The counter wraps when it exceeds the max… |
| 1.3.6.1.4.1.562.36.2.1.128.10.11.1.3 | ColumnmscGsmBcL2RCopBreakCountRx | read-only | mandatory | This attribute counts the number of breaks received from the mobile. A break received from the mobile results in the V.42bis function being reset and the break… |
| 1.3.6.1.4.1.562.36.2.1.128.10.11.1.4 | ColumnmscGsmBcL2RCopBreakCountTx | read-only | mandatory | This attribute counts the number of breaks transmitted to the mobile (a break was received from the network). A break received from the network results in the … |
| 1.3.6.1.4.1.562.36.2.1.128.11 | NodemscGsmBcUpperRelay | |||
| 1.3.6.1.4.1.562.36.2.1.128.11.1 | TablemscGsmBcUpperRelayRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscGsmBcUpperRelay components. |
| 1.3.6.1.4.1.562.36.2.1.128.11.1.1 | RowmscGsmBcUpperRelayRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscGsmBcUpperRelay component. |
| 1.3.6.1.4.1.562.36.2.1.128.11.1.1.1 | ColumnmscGsmBcUpperRelayRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscGsmBcUpperRelay components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.128.11.1.1.2 | ColumnmscGsmBcUpperRelayComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.128.11.1.1.4 | ColumnmscGsmBcUpperRelayStorageType | read-only | mandatory | This variable represents the storage type value for the mscGsmBcUpperRelay tables. |
| 1.3.6.1.4.1.562.36.2.1.128.11.1.1.10 | ColumnmscGsmBcUpperRelayIndex | not-accessible | mandatory | This variable represents the index for the mscGsmBcUpperRelay tables. |
| 1.3.6.1.4.1.562.36.2.1.128.11.10 | TablemscGsmBcUpperRelayOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of the UpperRelay. |
| 1.3.6.1.4.1.562.36.2.1.128.11.10.1 | RowmscGsmBcUpperRelayOperEntry | not-accessible | mandatory | An entry in the mscGsmBcUpperRelayOperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.11.10.1.1 | ColumnmscGsmBcUpperRelayBufferSize | read-only | mandatory | This attribute indicates the size of the transmit and receive flow control buffers. |
| 1.3.6.1.4.1.562.36.2.1.128.11.10.1.2 | ColumnmscGsmBcUpperRelayFlowControlStateTx | read-only | mandatory | This attribute indicates whether the transmit flow control is active or not. |
| 1.3.6.1.4.1.562.36.2.1.128.11.10.1.3 | ColumnmscGsmBcUpperRelayFlowControlStateRx | read-only | mandatory | This attribute indicates whether the receive flow control is active or not. |
| 1.3.6.1.4.1.562.36.2.1.128.11.11 | TablemscGsmBcUpperRelayStatsTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of the UpperRelay. |
| 1.3.6.1.4.1.562.36.2.1.128.11.11.1 | RowmscGsmBcUpperRelayStatsEntry | not-accessible | mandatory | An entry in the mscGsmBcUpperRelayStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.128.11.11.1.1 | ColumnmscGsmBcUpperRelayFramesTx | read-only | mandatory | This attribute counts the number of frames that are sent in the transmit direction. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.11.11.1.2 | ColumnmscGsmBcUpperRelayFramesRx | read-only | mandatory | This attribute counts the number of frames that are sent in the receive direction. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.128.11.11.1.3 | ColumnmscGsmBcUpperRelayUnacknowledgedFrames | read-only | mandatory | This attribute indicates the number of current frames sent that have not been acknowledged. |
| 1.3.6.1.4.1.562.36.2.1.128.101 | TablemscGsmBcOperTable | not-accessible | mandatory | This group contains operational attributes concerning the operation of this particular GsmIwfBearerChannel for the current or most recent call. |
| 1.3.6.1.4.1.562.36.2.1.128.101.1 | RowmscGsmBcOperEntry | not-accessible | mandatory | An entry in the mscGsmBcOperTable. |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.1 | ColumnmscGsmBcMipState | read-only | mandatory | This attribute indicates the current state of the MSC/IWF Interface Protocol (MIP) for an IWF element. Valid values are: idle, Startup state of IWF element. pe… |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.2 | ColumnmscGsmBcMaxUserDataRate | read-only | mandatory | This attribute indicates the user rate which is in affect between the IWF and the fixed network. A user rate of 1200_75 is 75 bit/s in the receive direction 12… |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.3 | ColumnmscGsmBcConnectionType | read-only | mandatory | This attribute indicates the connection types between the terminal equipment or terminal adaptor and mobile and between the IWF and the network. Valid connecti… |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.4 | ColumnmscGsmBcDataBits | read-only | mandatory | This attribute indicates the number of data bits encoded between start and stop bits in an asynchronous data call connection data stream. This attribute is set… |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.5 | ColumnmscGsmBcStopBits | read-only | mandatory | This attribute indicates the number of stop bits (a mark (binary 1) placed at the end of each data byte) inserted between the data bits in an asynchronous data… |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.6 | ColumnmscGsmBcParity | read-only | mandatory | This attribute indicates the type of parity for the data bits in an asynchronous data call connection data stream. Parity is a redundant bit that is added to e… |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.7 | ColumnmscGsmBcFlowControl | read-only | mandatory | This attribute indicates the current flow control status of this GsmIwfBearerChannel for an asynchronous call. For a synchronous data call this attribute will … |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.8 | ColumnmscGsmBcCallType | read-only | mandatory | This attribute indicates the current call type. Valid values are: faxG3, group 3 fax calls cda31khz, asynchronous 3.1kHz modem cdaUdi, asynchronous unrestricte… |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.9 | ColumnmscGsmBcLastResponseCode | read-only | mandatory | This attribute indicates the MSC/IWF Interface Protocol (MIP) response code returned for the last call which was active on this particular GsmIwfBearerChannel.… |
| 1.3.6.1.4.1.562.36.2.1.128.101.1.10 | ColumnmscGsmBcMateBearerChannel | read-only | mandatory | This attribute contains the name of the mate GsmIwfBearerChannel that this GsmIwfBearerChannel is involved with in the currently active call. |
| 1.3.6.1.4.1.562.36.2.1.128.104 | TablemscGsmBcCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.128.104.1 | RowmscGsmBcCidDataEntry | not-accessible | mandatory | An entry in the mscGsmBcCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.128.104.1.1 | ColumnmscGsmBcCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.128.105 | TablemscGsmBcStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.128.105.1 | RowmscGsmBcStateEntry | not-accessible | mandatory | An entry in the mscGsmBcStateTable. |
| 1.3.6.1.4.1.562.36.2.1.128.105.1.1 | ColumnmscGsmBcAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.128.105.1.2 | ColumnmscGsmBcOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.128.105.1.3 | ColumnmscGsmBcUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.2.129 | NodegsmIwfMIB | |||
| 1.3.6.1.4.1.562.36.2.2.129.1 | NodegsmIwfGroup | |||
| 1.3.6.1.4.1.562.36.2.2.129.1.1 | NodegsmIwfGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.129.1.1.3 | NodegsmIwfGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.129.1.1.3.2 | NodegsmIwfGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.129.3 | NodegsmIwfCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.129.3.1 | NodegsmIwfCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.129.3.1.3 | NodegsmIwfCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.129.3.1.3.2 | NodegsmIwfCapabilitiesCA02A |