Nortel-MsCarrier-MscPassport-PppMIB
201 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.102 | NodemscPpp | |||
| 1.3.6.1.4.1.562.36.2.1.102.1 | TablemscPppRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscPpp components. |
| 1.3.6.1.4.1.562.36.2.1.102.1.1 | RowmscPppRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscPpp component. |
| 1.3.6.1.4.1.562.36.2.1.102.1.1.1 | ColumnmscPppRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscPpp components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.102.1.1.2 | ColumnmscPppComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.102.1.1.4 | ColumnmscPppStorageType | read-only | mandatory | This variable represents the storage type value for the mscPpp tables. |
| 1.3.6.1.4.1.562.36.2.1.102.1.1.10 | ColumnmscPppIndex | not-accessible | mandatory | This variable represents the index for the mscPpp tables. |
| 1.3.6.1.4.1.562.36.2.1.102.2 | NodemscPppLnk | |||
| 1.3.6.1.4.1.562.36.2.1.102.2.1 | TablemscPppLnkRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscPppLnk components. |
| 1.3.6.1.4.1.562.36.2.1.102.2.1.1 | RowmscPppLnkRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscPppLnk component. |
| 1.3.6.1.4.1.562.36.2.1.102.2.1.1.1 | ColumnmscPppLnkRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscPppLnk components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.102.2.1.1.2 | ColumnmscPppLnkComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.102.2.1.1.4 | ColumnmscPppLnkStorageType | read-only | mandatory | This variable represents the storage type value for the mscPppLnk tables. |
| 1.3.6.1.4.1.562.36.2.1.102.2.1.1.10 | ColumnmscPppLnkIndex | not-accessible | mandatory | This variable represents the index for the mscPppLnk tables. |
| 1.3.6.1.4.1.562.36.2.1.102.2.10 | TablemscPppLnkProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the Ppp Link component. |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1 | RowmscPppLnkProvEntry | not-accessible | mandatory | An entry in the mscPppLnkProvTable. |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.1 | ColumnmscPppLnkConfigInitialMru | read-write | mandatory | This is the initial Maximum Receive Unit (Mru) that the local Ppp entity will advertise to the remote entity. A change to this attribute will not take effect u… |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.4 | ColumnmscPppLnkConfigMagicNumber | read-write | mandatory | If enabled then the local node will attempt to perform Magic Number negotiation with the remote node. If disabled then this negotiation is not performed. In an… |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.6 | ColumnmscPppLnkRestartTimer | read-write | mandatory | This is the time, in milliseconds, that Ppp will wait for a response to a configure request or a terminate request before retrying. |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.7 | ColumnmscPppLnkContinuityMonitor | read-write | mandatory | This attribute turns on/off (enabled/disabled) the Link Continuity Monitor. If set to enabled, periodic keep alive echo packet will be sent over the Ppp link. … |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.8 | ColumnmscPppLnkNegativeAckTries | read-write | mandatory | This attribute specifies the maximum negative acknowledgments sent to the remote Ppp entity during negotiation before defaulting it's configuration parameters. |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.9 | ColumnmscPppLnkQualityThreshold | read-write | mandatory | This attribute specifies the minimum allowed line quality before the line is considered too poor to continue operation. The value for this attribute is a perce… |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.10 | ColumnmscPppLnkQualityWindow | read-write | mandatory | This attribute specifies the number of seconds used for sampling line quality. If line quality drops below the level set with the qualityThreshold attribute du… |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.11 | ColumnmscPppLnkTerminateRequestTries | read-write | mandatory | This attribute specifies the maximum terminate requests to be sent, when closing the connection, and not answered before this instance of Ppp enters a closing … |
| 1.3.6.1.4.1.562.36.2.1.102.2.10.1.12 | ColumnmscPppLnkConfigureRequestTries | read-write | mandatory | This attribute specifies the number of configuration requests that will be sent out and not answered before this instance of Ppp enters a listening state. If b… |
| 1.3.6.1.4.1.562.36.2.1.102.2.11 | TablemscPppLnkOperTable | not-accessible | mandatory | This group contains the Ppp Link Operational attributes. |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1 | RowmscPppLnkOperEntry | not-accessible | mandatory | An entry in the mscPppLnkOperTable. |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.1 | ColumnmscPppLnkOperState | read-only | mandatory | This is the operational state of the Link Control Protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.2 | ColumnmscPppLnkLineCondition | read-only | mandatory | This attribute describes the condition of the physical line that Ppp is running over. ok: The condition of the line is good. looped: The line is looped back on… |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.4 | ColumnmscPppLnkBadAddresses | read-only | mandatory | This attribute counts the number of packets received with an incorrect Address Field. If this count is going up quickly, it could indicate that there is a line… |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.5 | ColumnmscPppLnkBadControls | read-only | mandatory | This attribute counts the number of packets received on this link with an incorrect Control Field. If this count is going up quickly, it could indicate that th… |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.6 | ColumnmscPppLnkPacketTooLongs | read-only | mandatory | This attribute counts the number of packets received that have been discarded because their length exceeded the Maximum Receive Unit (Mru). This counter will w… |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.7 | ColumnmscPppLnkBadFcss | read-only | mandatory | This attribute counts the number of packets received that have been discarded due to having an incorrect Frame Check Sequence (Fcs). This counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.8 | ColumnmscPppLnkLocalMru | read-only | mandatory | This is the current value of the Maximum Receive Unit (Mru) for the local Ppp Entity. This value is the Mru that the remote entity is using when sending packet… |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.9 | ColumnmscPppLnkRemoteMru | read-only | mandatory | This is the current value of the Maximum Receive Unit (Mru) for the remote Ppp entity. This value is the Mru that the local entity is using when sending packet… |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.16 | ColumnmscPppLnkTransmitFcsSize | read-only | mandatory | This is the size of the Frame Check Sequence (Fcs) in bits that the local node will generate when sending packets to the remote node. |
| 1.3.6.1.4.1.562.36.2.1.102.2.11.1.17 | ColumnmscPppLnkReceiveFcsSize | read-only | mandatory | This is the size of the Frame Check Sequence (Fcs) in bits that the remote node will generate when sending packets to the local node. |
| 1.3.6.1.4.1.562.36.2.1.102.3 | NodemscPppLqm | |||
| 1.3.6.1.4.1.562.36.2.1.102.3.1 | TablemscPppLqmRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscPppLqm components. |
| 1.3.6.1.4.1.562.36.2.1.102.3.1.1 | RowmscPppLqmRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscPppLqm component. |
| 1.3.6.1.4.1.562.36.2.1.102.3.1.1.1 | ColumnmscPppLqmRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscPppLqm components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.102.3.1.1.2 | ColumnmscPppLqmComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.102.3.1.1.4 | ColumnmscPppLqmStorageType | read-only | mandatory | This variable represents the storage type value for the mscPppLqm tables. |
| 1.3.6.1.4.1.562.36.2.1.102.3.1.1.10 | ColumnmscPppLqmIndex | not-accessible | mandatory | This variable represents the index for the mscPppLqm tables. |
| 1.3.6.1.4.1.562.36.2.1.102.3.10 | TablemscPppLqmProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the Ppp Link Quality Monitor component. |
| 1.3.6.1.4.1.562.36.2.1.102.3.10.1 | RowmscPppLqmProvEntry | not-accessible | mandatory | An entry in the mscPppLqmProvTable. |
| 1.3.6.1.4.1.562.36.2.1.102.3.10.1.1 | ColumnmscPppLqmConfigPeriod | read-write | mandatory | This is the Lqm reporting period that the local Ppp entity will attempt to negotiate with the remote entity, in units of hundredths of a second. A value of '0'… |
| 1.3.6.1.4.1.562.36.2.1.102.3.10.1.2 | ColumnmscPppLqmConfigStatus | read-write | mandatory | If this attribute is enabled, the local node will attempt to perform Lqm negotiation with the remote node. If it is disabled then this negotiation is not perfo… |
| 1.3.6.1.4.1.562.36.2.1.102.3.11 | TablemscPppLqmOperTable | not-accessible | mandatory | This group contains the operational attributes for the Ppp Link Quality Monitor component. |
| 1.3.6.1.4.1.562.36.2.1.102.3.11.1 | RowmscPppLqmOperEntry | not-accessible | mandatory | An entry in the mscPppLqmOperTable. |
| 1.3.6.1.4.1.562.36.2.1.102.3.11.1.1 | ColumnmscPppLqmQuality | read-only | mandatory | This is the current quality of the link as declared by the local Ppp entity's Link-Quality Management modules. A value of good indicates that LinkQualityMonito… |
| 1.3.6.1.4.1.562.36.2.1.102.3.11.1.2 | ColumnmscPppLqmInGoodOctets | read-only | mandatory | This attribute counts the number of good octets received. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.102.3.11.1.3 | ColumnmscPppLqmLocalPeriod | read-only | mandatory | This is the Lqm reporting period, in hundredths of a second that is in effect for the local Ppp entity. |
| 1.3.6.1.4.1.562.36.2.1.102.3.11.1.4 | ColumnmscPppLqmRemotePeriod | read-only | mandatory | This is the Lqm reporting period, in hundredths of a second, that is in effect for the remote Ppp entity. |
| 1.3.6.1.4.1.562.36.2.1.102.3.11.1.5 | ColumnmscPppLqmOutLqrs | read-only | mandatory | This attribute counts the number of link quality reports sent out. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.102.3.11.1.6 | ColumnmscPppLqmInLqrs | read-only | mandatory | This attribute counts the number of link quality reports received. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.102.4 | NodemscPppNcp | |||
| 1.3.6.1.4.1.562.36.2.1.102.4.1 | TablemscPppNcpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscPppNcp components. |
| 1.3.6.1.4.1.562.36.2.1.102.4.1.1 | RowmscPppNcpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscPppNcp component. |
| 1.3.6.1.4.1.562.36.2.1.102.4.1.1.1 | ColumnmscPppNcpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscPppNcp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.102.4.1.1.2 | ColumnmscPppNcpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.102.4.1.1.4 | ColumnmscPppNcpStorageType | read-only | mandatory | This variable represents the storage type value for the mscPppNcp tables. |
| 1.3.6.1.4.1.562.36.2.1.102.4.1.1.10 | ColumnmscPppNcpIndex | not-accessible | mandatory | This variable represents the index for the mscPppNcp tables. |
| 1.3.6.1.4.1.562.36.2.1.102.4.2 | NodemscPppNcpBmcEntry | |||
| 1.3.6.1.4.1.562.36.2.1.102.4.2.1 | TablemscPppNcpBmcEntryRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscPppNcpBmcEntry components. |
| 1.3.6.1.4.1.562.36.2.1.102.4.2.1.1 | RowmscPppNcpBmcEntryRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscPppNcpBmcEntry component. |
| 1.3.6.1.4.1.562.36.2.1.102.4.2.1.1.1 | ColumnmscPppNcpBmcEntryRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscPppNcpBmcEntry components. These components can be added. |
| 1.3.6.1.4.1.562.36.2.1.102.4.2.1.1.2 | ColumnmscPppNcpBmcEntryComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.102.4.2.1.1.4 | ColumnmscPppNcpBmcEntryStorageType | read-only | mandatory | This variable represents the storage type value for the mscPppNcpBmcEntry tables. |
| 1.3.6.1.4.1.562.36.2.1.102.4.2.1.1.10 | ColumnmscPppNcpBmcEntryMacTypeIndex | not-accessible | mandatory | This variable represents the index for the mscPppNcpBmcEntry tables. |
| 1.3.6.1.4.1.562.36.2.1.102.4.2.10 | TablemscPppNcpBmcEntryProvTable | not-accessible | mandatory | This group contains the attributes for one entry in the BridgeMediaConfigEntry table. |
| 1.3.6.1.4.1.562.36.2.1.102.4.2.10.1 | RowmscPppNcpBmcEntryProvEntry | not-accessible | mandatory | An entry in the mscPppNcpBmcEntryProvTable. |
| 1.3.6.1.4.1.562.36.2.1.102.4.2.10.1.1 | ColumnmscPppNcpBmcEntryLocalStatus | read-write | mandatory | This attribute indicates whether the local Ppp bridging entity should accept packets of the protocol type identified by the instance value of this component. S… |
| 1.3.6.1.4.1.562.36.2.1.102.4.3 | NodemscPppNcpBmEntry | |||
| 1.3.6.1.4.1.562.36.2.1.102.4.3.1 | TablemscPppNcpBmEntryRowStatusTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscPppNcpBmEntry components. |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.1.1 | RowmscPppNcpBmEntryRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscPppNcpBmEntry component. |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.1.1.1 | ColumnmscPppNcpBmEntryRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscPppNcpBmEntry components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.1.1.2 | ColumnmscPppNcpBmEntryComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.1.1.4 | ColumnmscPppNcpBmEntryStorageType | read-only | mandatory | This variable represents the storage type value for the mscPppNcpBmEntry tables. |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.1.1.10 | ColumnmscPppNcpBmEntryMacTypeIndex | not-accessible | mandatory | This variable represents the index for the mscPppNcpBmEntry tables. |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.10 | TablemscPppNcpBmEntryOperTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the attributes for one entry in the BridgeMediaEntry table. |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.10.1 | RowmscPppNcpBmEntryOperEntry | not-accessible | mandatory | An entry in the mscPppNcpBmEntryOperTable. |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.10.1.2 | ColumnmscPppNcpBmEntryLocalStatus | read-only | mandatory | This attribute indicates whether the local Ppp bridging entity will accept packets of the protocol type identified by the instance value of this component. A v… |
| 1.3.6.1.4.1.562.36.2.1.102.4.3.10.1.3 | ColumnmscPppNcpBmEntryRemoteStatus | read-only | mandatory | This attribute indicates whether the remote Ppp bridging entity will accept packets of the protocol type identified by the instance value of this component. A … |
| 1.3.6.1.4.1.562.36.2.1.102.4.11 | TablemscPppNcpBprovTable | not-accessible | mandatory | This group contains the provisioned attributes for the Bridge Network Control Protocol. |
| 1.3.6.1.4.1.562.36.2.1.102.4.11.1 | RowmscPppNcpBprovEntry | not-accessible | mandatory | An entry in the mscPppNcpBprovTable. |
| 1.3.6.1.4.1.562.36.2.1.102.4.11.1.1 | ColumnmscPppNcpBConfigTinygram | read-write | mandatory | If this attribute is set to disabled then the local Bridge Network Control Protocol (Bncp) entity will not initiate the tinygram compression option negotiation… |
| 1.3.6.1.4.1.562.36.2.1.102.4.11.1.4 | ColumnmscPppNcpBConfigLanId | read-write | mandatory | If this attribute is set to disabled then the local Bncp entity will not initiate the lan identification option negotiation. If it is enabled then the local Bn… |
| 1.3.6.1.4.1.562.36.2.1.102.4.12 | TablemscPppNcpIpOperTable | not-accessible | mandatory | This group contains the Ip Network Control Protocol operational attributes. |
| 1.3.6.1.4.1.562.36.2.1.102.4.12.1 | RowmscPppNcpIpOperEntry | not-accessible | mandatory | An entry in the mscPppNcpIpOperTable. |
| 1.3.6.1.4.1.562.36.2.1.102.4.12.1.1 | ColumnmscPppNcpIpOperState | read-only | mandatory | This is the operational state of the Ip network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.36.2.1.102.4.14 | TablemscPppNcpBoperTable | not-accessible | mandatory | This group contains the Bridge Network Control Protocol operational attributes. |
| 1.3.6.1.4.1.562.36.2.1.102.4.14.1 | RowmscPppNcpBoperEntry | not-accessible | mandatory | An entry in the mscPppNcpBoperTable. |
| 1.3.6.1.4.1.562.36.2.1.102.4.14.1.1 | ColumnmscPppNcpBOperState | read-only | mandatory | This is the operational status of the bridge network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.36.2.1.102.4.14.1.3 | ColumnmscPppNcpBLocalToRemoteTinygramComp | read-only | mandatory | This attribute indicates whether the local node will perform tinygram compression when sending packets to the remote entity. If it is disabled then the local e… |
| 1.3.6.1.4.1.562.36.2.1.102.4.14.1.4 | ColumnmscPppNcpBRemoteToLocalTinygramComp | read-only | mandatory | If this attribute is disabled then the remote entity is not expected to perform tinygram compression. If it is enabled then the remote entity is expected to pe… |
| 1.3.6.1.4.1.562.36.2.1.102.4.14.1.5 | ColumnmscPppNcpBLocalToRemoteLanId | read-only | mandatory | This attribute indicates whether the local node will include the lan identification field in transmitted packets or not. If it is disabled then the local node … |
| 1.3.6.1.4.1.562.36.2.1.102.4.14.1.6 | ColumnmscPppNcpBRemoteToLocalLanId | read-only | mandatory | This attribute indicates whether the remote node has indicated that it will include the lan identification field in transmitted packets or not. If it is disabl… |
| 1.3.6.1.4.1.562.36.2.1.102.4.16 | TablemscPppNcpOperTable | not-accessible | mandatory | This group contains the operational attributes for any Network Control Protocols other than Ip and Bridge. |
| 1.3.6.1.4.1.562.36.2.1.102.4.16.1 | RowmscPppNcpOperEntry | not-accessible | mandatory | An entry in the mscPppNcpOperTable. |
| 1.3.6.1.4.1.562.36.2.1.102.4.16.1.1 | ColumnmscPppNcpAppletalkOperState | read-only | mandatory | This is the operational state of the AppleTalk network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.36.2.1.102.4.16.1.2 | ColumnmscPppNcpIpxOperState | read-only | mandatory | This is the operational state of the Ipx network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.36.2.1.102.4.16.1.3 | ColumnmscPppNcpXnsOperState | read-only | mandatory | This is the operational state of the Xns network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.36.2.1.102.4.16.1.4 | ColumnmscPppNcpDecnetOperState | read-only | mandatory | This is the operational state of the DecNet network protocol. For more information as to the definition of each state see RFC1331 section 5.3. |
| 1.3.6.1.4.1.562.36.2.1.102.5 | NodemscPppFramer | |||
| 1.3.6.1.4.1.562.36.2.1.102.5.1 | TablemscPppFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscPppFramer components. |
| 1.3.6.1.4.1.562.36.2.1.102.5.1.1 | RowmscPppFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscPppFramer component. |
| 1.3.6.1.4.1.562.36.2.1.102.5.1.1.1 | ColumnmscPppFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscPppFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.102.5.1.1.2 | ColumnmscPppFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.102.5.1.1.4 | ColumnmscPppFramerStorageType | read-only | mandatory | This variable represents the storage type value for the mscPppFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.102.5.1.1.10 | ColumnmscPppFramerIndex | not-accessible | mandatory | This variable represents the index for the mscPppFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.102.5.10 | TablemscPppFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.36.2.1.102.5.10.1 | RowmscPppFramerProvEntry | not-accessible | mandatory | An entry in the mscPppFramerProvTable. |
| 1.3.6.1.4.1.562.36.2.1.102.5.10.1.1 | ColumnmscPppFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the logical processor on which F… |
| 1.3.6.1.4.1.562.36.2.1.102.5.12 | TablemscPppFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.102.5.12.1 | RowmscPppFramerStateEntry | not-accessible | mandatory | An entry in the mscPppFramerStateTable. |
| 1.3.6.1.4.1.562.36.2.1.102.5.12.1.1 | ColumnmscPppFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.102.5.12.1.2 | ColumnmscPppFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.102.5.12.1.3 | ColumnmscPppFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.102.5.13 | TablemscPppFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1 | RowmscPppFramerStatsEntry | not-accessible | mandatory | An entry in the mscPppFramerStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.1 | ColumnmscPppFramerFrmToIf | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly t… |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.2 | ColumnmscPppFramerFrmFromIf | read-only | mandatory | This attribute counts the number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.3 | ColumnmscPppFramerAborts | read-only | mandatory | This attribute counts the total number of aborts received. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.4 | ColumnmscPppFramerCrcErrors | read-only | mandatory | This attribute counts the total number of frames with CRC errors. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.5 | ColumnmscPppFramerLrcErrors | read-only | mandatory | This attribute counts the total number of frames with LRC errors. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.6 | ColumnmscPppFramerNonOctetErrors | read-only | mandatory | This attribute counts the total number of frames that were non octet aligned. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.7 | ColumnmscPppFramerOverruns | read-only | mandatory | This attribute counts the total number of frames received from the link for which overruns occurred. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.8 | ColumnmscPppFramerUnderruns | read-only | mandatory | This attribute counts the total number of frames transmitted to the link for which underruns occurred. |
| 1.3.6.1.4.1.562.36.2.1.102.5.13.1.9 | ColumnmscPppFramerLargeFrmErrors | read-only | mandatory | This attribute counts the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it con… |
| 1.3.6.1.4.1.562.36.2.1.102.5.14 | TablemscPppFramerUtilTable | not-accessible | mandatory | This group contains the link utilizaiton operational data for a Framer component. |
| 1.3.6.1.4.1.562.36.2.1.102.5.14.1 | RowmscPppFramerUtilEntry | not-accessible | mandatory | An entry in the mscPppFramerUtilTable. |
| 1.3.6.1.4.1.562.36.2.1.102.5.14.1.1 | ColumnmscPppFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal priority data sent to the link as a percentage of the available bandwidth on the link. The utilization is the a… |
| 1.3.6.1.4.1.562.36.2.1.102.5.14.1.3 | ColumnmscPppFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal priority data received from the link as a percentage of the available bandwidth on the link. The utilization is… |
| 1.3.6.1.4.1.562.36.2.1.102.6 | NodemscPppLeq | |||
| 1.3.6.1.4.1.562.36.2.1.102.6.1 | TablemscPppLeqRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscPppLeq components. |
| 1.3.6.1.4.1.562.36.2.1.102.6.1.1 | RowmscPppLeqRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscPppLeq component. |
| 1.3.6.1.4.1.562.36.2.1.102.6.1.1.1 | ColumnmscPppLeqRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscPppLeq components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.102.6.1.1.2 | ColumnmscPppLeqComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.102.6.1.1.4 | ColumnmscPppLeqStorageType | read-only | mandatory | This variable represents the storage type value for the mscPppLeq tables. |
| 1.3.6.1.4.1.562.36.2.1.102.6.1.1.10 | ColumnmscPppLeqIndex | not-accessible | mandatory | This variable represents the index for the mscPppLeq tables. |
| 1.3.6.1.4.1.562.36.2.1.102.6.10 | TablemscPppLeqProvTable | not-accessible | mandatory | This group contains the provisioned attributes for the LinkEmissionQueue component. |
| 1.3.6.1.4.1.562.36.2.1.102.6.10.1 | RowmscPppLeqProvEntry | not-accessible | mandatory | An entry in the mscPppLeqProvTable. |
| 1.3.6.1.4.1.562.36.2.1.102.6.10.1.1 | ColumnmscPppLeqMaxPackets | read-write | mandatory | This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of p… |
| 1.3.6.1.4.1.562.36.2.1.102.6.10.1.2 | ColumnmscPppLeqMaxMsecData | read-write | mandatory | This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be cal… |
| 1.3.6.1.4.1.562.36.2.1.102.6.10.1.3 | ColumnmscPppLeqMaxPercentMulticast | read-write | mandatory | This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated val… |
| 1.3.6.1.4.1.562.36.2.1.102.6.10.1.4 | ColumnmscPppLeqTimeToLive | read-write | mandatory | This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded. |
| 1.3.6.1.4.1.562.36.2.1.102.6.11 | TablemscPppLeqStatsTable | not-accessible | mandatory | This group contains Link Emission Queue general statistics. |
| 1.3.6.1.4.1.562.36.2.1.102.6.11.1 | RowmscPppLeqStatsEntry | not-accessible | mandatory | An entry in the mscPppLeqStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.102.6.11.1.1 | ColumnmscPppLeqTimedOutPkt | read-only | mandatory | This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its ma… |
| 1.3.6.1.4.1.562.36.2.1.102.6.11.1.2 | ColumnmscPppLeqHardwareForcedPkt | read-only | mandatory | This attribute counts the number of hardware forced packets on this instance of Ppp. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.102.6.11.1.4 | ColumnmscPppLeqForcedPktDiscards | read-only | mandatory | This attribute counts the total number of hardware forced packets that had to be discarded due to link failure. This counter will wrap around to 0 when it exce… |
| 1.3.6.1.4.1.562.36.2.1.102.6.11.1.5 | ColumnmscPppLeqQueuePurgeDiscards | read-only | mandatory | This attribute counts the total number of packets discarded by a queue purge (i.e. a discarding of all packets on the queue). This counter will wrap around to … |
| 1.3.6.1.4.1.562.36.2.1.102.6.12 | TablemscPppLeqTStatsTable | not-accessible | mandatory | This group contains Link Emission Queue total statistics. |
| 1.3.6.1.4.1.562.36.2.1.102.6.12.1 | RowmscPppLeqTStatsEntry | not-accessible | mandatory | An entry in the mscPppLeqTStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.102.6.12.1.1 | ColumnmscPppLeqTotalPktHandled | read-only | mandatory | This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.102.6.12.1.2 | ColumnmscPppLeqTotalPktForwarded | read-only | mandatory | This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.102.6.12.1.3 | ColumnmscPppLeqTotalPktQueued | read-only | mandatory | This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it excee… |
| 1.3.6.1.4.1.562.36.2.1.102.6.12.1.4 | ColumnmscPppLeqTotalMulticastPkt | read-only | mandatory | This attribute counts the total number of multicast packets handled by this instance of Ppp. This counter will wrap around to 0 when it exceeds its maximum cou… |
| 1.3.6.1.4.1.562.36.2.1.102.6.12.1.8 | ColumnmscPppLeqTotalPktDiscards | read-only | mandatory | This attribute counts the total number of packets that were discarded for this instance of Ppp. This is the sum of timedOutPkt, forcedPktDiscards, queuePurgeDi… |
| 1.3.6.1.4.1.562.36.2.1.102.6.13 | TablemscPppLeqCStatsTable | not-accessible | mandatory | This group contains Link Emission Queue current statistics. |
| 1.3.6.1.4.1.562.36.2.1.102.6.13.1 | RowmscPppLeqCStatsEntry | not-accessible | mandatory | An entry in the mscPppLeqCStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.102.6.13.1.1 | ColumnmscPppLeqCurrentPktQueued | read-only | mandatory | This attribute counts the current number of packets queued. |
| 1.3.6.1.4.1.562.36.2.1.102.6.13.1.2 | ColumnmscPppLeqCurrentBytesQueued | read-only | mandatory | This attribute counts the current number of bytes queued. |
| 1.3.6.1.4.1.562.36.2.1.102.6.13.1.3 | ColumnmscPppLeqCurrentMulticastQueued | read-only | mandatory | This attribute counts the current number of multicast packets in the queue. |
| 1.3.6.1.4.1.562.36.2.1.102.6.14 | TablemscPppLeqThrStatsTable | not-accessible | mandatory | This group contains Link Emission Queue threshold statistics. |
| 1.3.6.1.4.1.562.36.2.1.102.6.14.1 | RowmscPppLeqThrStatsEntry | not-accessible | mandatory | An entry in the mscPppLeqThrStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.102.6.14.1.1 | ColumnmscPppLeqQueuePktThreshold | read-only | mandatory | This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will … |
| 1.3.6.1.4.1.562.36.2.1.102.6.14.1.2 | ColumnmscPppLeqPktThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maxim… |
| 1.3.6.1.4.1.562.36.2.1.102.6.14.1.3 | ColumnmscPppLeqQueueByteThreshold | read-only | mandatory | This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate. |
| 1.3.6.1.4.1.562.36.2.1.102.6.14.1.4 | ColumnmscPppLeqByteThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maxi… |
| 1.3.6.1.4.1.562.36.2.1.102.6.14.1.5 | ColumnmscPppLeqQueueMulticastThreshold | read-only | mandatory | This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets. |
| 1.3.6.1.4.1.562.36.2.1.102.6.14.1.6 | ColumnmscPppLeqMulThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its… |
| 1.3.6.1.4.1.562.36.2.1.102.6.14.1.7 | ColumnmscPppLeqMemThresholdExceeded | read-only | mandatory | This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq … |
| 1.3.6.1.4.1.562.36.2.1.102.20 | TablemscPppCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.102.20.1 | RowmscPppCidDataEntry | not-accessible | mandatory | An entry in the mscPppCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.102.20.1.1 | ColumnmscPppCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.102.21 | TablemscPppIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.102.21.1 | RowmscPppIfEntryEntry | not-accessible | mandatory | An entry in the mscPppIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.102.21.1.1 | ColumnmscPppIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.102.21.1.2 | ColumnmscPppIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.102.22 | TablemscPppMpTable | not-accessible | mandatory | This group contains the base provisioning data for the Media Application component. |
| 1.3.6.1.4.1.562.36.2.1.102.22.1 | RowmscPppMpEntry | not-accessible | mandatory | An entry in the mscPppMpTable. |
| 1.3.6.1.4.1.562.36.2.1.102.22.1.1 | ColumnmscPppLinkToProtocolPort | read-write | mandatory | This attribute contains a protocol port component name. The attribute associates the application with a protocol port. |
| 1.3.6.1.4.1.562.36.2.1.102.23 | TablemscPppStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.102.23.1 | RowmscPppStateEntry | not-accessible | mandatory | An entry in the mscPppStateTable. |
| 1.3.6.1.4.1.562.36.2.1.102.23.1.1 | ColumnmscPppAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.102.23.1.2 | ColumnmscPppOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.102.23.1.3 | ColumnmscPppUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.102.24 | TablemscPppOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.102.24.1 | RowmscPppOperStatusEntry | not-accessible | mandatory | An entry in the mscPppOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.102.24.1.1 | ColumnmscPppSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.2.33 | NodepppMIB | |||
| 1.3.6.1.4.1.562.36.2.2.33.1 | NodepppGroup | |||
| 1.3.6.1.4.1.562.36.2.2.33.1.1 | NodepppGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.33.1.1.3 | NodepppGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.33.1.1.3.2 | NodepppGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.33.3 | NodepppCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.33.3.1 | NodepppCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.33.3.1.3 | NodepppCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.33.3.1.3.2 | NodepppCapabilitiesCA02A |