Nortel-MsCarrier-MscPassport-TdmaIwfMIB
340 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.135 | NodemscTdmaCs | |||
| 1.3.6.1.4.1.562.36.2.1.135.1 | TablemscTdmaCsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCs components. |
| 1.3.6.1.4.1.562.36.2.1.135.1.1 | RowmscTdmaCsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCs component. |
| 1.3.6.1.4.1.562.36.2.1.135.1.1.1 | ColumnmscTdmaCsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCs components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.135.1.1.2 | ColumnmscTdmaCsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.1.1.4 | ColumnmscTdmaCsStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCs tables. |
| 1.3.6.1.4.1.562.36.2.1.135.1.1.10 | ColumnmscTdmaCsCsIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaCs tables. |
| 1.3.6.1.4.1.562.36.2.1.135.2 | NodemscTdmaCsModem | |||
| 1.3.6.1.4.1.562.36.2.1.135.2.1 | TablemscTdmaCsModemRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCsModem components. |
| 1.3.6.1.4.1.562.36.2.1.135.2.1.1 | RowmscTdmaCsModemRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCsModem component. |
| 1.3.6.1.4.1.562.36.2.1.135.2.1.1.1 | ColumnmscTdmaCsModemRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCsModem components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.135.2.1.1.2 | ColumnmscTdmaCsModemComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.2.1.1.4 | ColumnmscTdmaCsModemStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCsModem tables. |
| 1.3.6.1.4.1.562.36.2.1.135.2.1.1.10 | ColumnmscTdmaCsModemIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaCsModem tables. |
| 1.3.6.1.4.1.562.36.2.1.135.3 | NodemscTdmaCsFax | |||
| 1.3.6.1.4.1.562.36.2.1.135.3.1 | TablemscTdmaCsFaxRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCsFax components. |
| 1.3.6.1.4.1.562.36.2.1.135.3.1.1 | RowmscTdmaCsFaxRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCsFax component. |
| 1.3.6.1.4.1.562.36.2.1.135.3.1.1.1 | ColumnmscTdmaCsFaxRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCsFax components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.135.3.1.1.2 | ColumnmscTdmaCsFaxComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.3.1.1.4 | ColumnmscTdmaCsFaxStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCsFax tables. |
| 1.3.6.1.4.1.562.36.2.1.135.3.1.1.10 | ColumnmscTdmaCsFaxIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaCsFax tables. |
| 1.3.6.1.4.1.562.36.2.1.135.4 | NodemscTdmaCsDce | |||
| 1.3.6.1.4.1.562.36.2.1.135.4.1 | TablemscTdmaCsDceRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCsDce components. |
| 1.3.6.1.4.1.562.36.2.1.135.4.1.1 | RowmscTdmaCsDceRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCsDce component. |
| 1.3.6.1.4.1.562.36.2.1.135.4.1.1.1 | ColumnmscTdmaCsDceRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCsDce components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.135.4.1.1.2 | ColumnmscTdmaCsDceComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.4.1.1.4 | ColumnmscTdmaCsDceStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCsDce tables. |
| 1.3.6.1.4.1.562.36.2.1.135.4.1.1.10 | ColumnmscTdmaCsDceIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaCsDce tables. |
| 1.3.6.1.4.1.562.36.2.1.135.5 | NodemscTdmaCsDsc | |||
| 1.3.6.1.4.1.562.36.2.1.135.5.1 | TablemscTdmaCsDscRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCsDsc components. |
| 1.3.6.1.4.1.562.36.2.1.135.5.1.1 | RowmscTdmaCsDscRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCsDsc component. |
| 1.3.6.1.4.1.562.36.2.1.135.5.1.1.1 | ColumnmscTdmaCsDscRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCsDsc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.135.5.1.1.2 | ColumnmscTdmaCsDscComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.5.1.1.4 | ColumnmscTdmaCsDscStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCsDsc tables. |
| 1.3.6.1.4.1.562.36.2.1.135.5.1.1.10 | ColumnmscTdmaCsDscIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaCsDsc tables. |
| 1.3.6.1.4.1.562.36.2.1.135.5.10 | TablemscTdmaCsDscProvTable | not-accessible | mandatory | This group contains the provisionable attributes for Data Service Control Asynchronous Data Service portion of the wireless protocol stack used for the calls s… |
| 1.3.6.1.4.1.562.36.2.1.135.5.10.1 | RowmscTdmaCsDscProvEntry | not-accessible | mandatory | An entry in the mscTdmaCsDscProvTable. |
| 1.3.6.1.4.1.562.36.2.1.135.5.10.1.1 | ColumnmscTdmaCsDscLl0BufferSize | read-write | obsolete | This attribute specifies the maximum size of the DSC logical link 0 control buffer. Changes impact the amount of memory used (more memory is used when increasi… |
| 1.3.6.1.4.1.562.36.2.1.135.5.10.1.2 | ColumnmscTdmaCsDscLl1BufferSize | read-write | obsolete | This attribute specifies the maximum size of the DSC logical link 1 data buffer. Changes impact the amount of memory used (more memory is used when increasing … |
| 1.3.6.1.4.1.562.36.2.1.135.5.10.1.3 | ColumnmscTdmaCsDscK0Ll0WindowSize | read-write | mandatory | This attribute specifies the maximum size of the DSC logical link 0 window. |
| 1.3.6.1.4.1.562.36.2.1.135.5.10.1.4 | ColumnmscTdmaCsDscK1Ll1WindowSize | read-write | mandatory | This attribute specifies the maximum size of the DSC logical link 1 window. |
| 1.3.6.1.4.1.562.36.2.1.135.5.10.1.5 | ColumnmscTdmaCsDscP0CompressionDirection | read-write | obsolete | This attribute specifies the compression configuration for DSC. This attribute has one of the following values: noCompression: No compression. compInitrResp: C… |
| 1.3.6.1.4.1.562.36.2.1.135.5.10.1.6 | ColumnmscTdmaCsDscP1CompressionMaximumCodewords | read-write | obsolete | This attribute specifies the maximum number of codewords to be used for compression. A codeword is a binary number that represents a string of characters. Chan… |
| 1.3.6.1.4.1.562.36.2.1.135.5.10.1.7 | ColumnmscTdmaCsDscP2CompressionMaximumCharacters | read-write | obsolete | This attribute specifies the maximum number of characters that can be represented by a single codeword to be used for compression from logical link 0. |
| 1.3.6.1.4.1.562.36.2.1.135.6 | NodemscTdmaCsRlp1 | |||
| 1.3.6.1.4.1.562.36.2.1.135.6.1 | TablemscTdmaCsRlp1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCsRlp1 components. |
| 1.3.6.1.4.1.562.36.2.1.135.6.1.1 | RowmscTdmaCsRlp1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCsRlp1 component. |
| 1.3.6.1.4.1.562.36.2.1.135.6.1.1.1 | ColumnmscTdmaCsRlp1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCsRlp1 components. These components can be added. |
| 1.3.6.1.4.1.562.36.2.1.135.6.1.1.2 | ColumnmscTdmaCsRlp1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.6.1.1.4 | ColumnmscTdmaCsRlp1StorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCsRlp1 tables. |
| 1.3.6.1.4.1.562.36.2.1.135.6.1.1.10 | ColumnmscTdmaCsRlp1Index | not-accessible | mandatory | This variable represents the index for the mscTdmaCsRlp1 tables. |
| 1.3.6.1.4.1.562.36.2.1.135.6.10 | TablemscTdmaCsRlp1ProvTable | not-accessible | mandatory | This group contains provisionable attributes for the Radio Link Protocol 1 (RLP1) parameters used for the calls set up by this particular TdmaIwfCallServer. Ch… |
| 1.3.6.1.4.1.562.36.2.1.135.6.10.1 | RowmscTdmaCsRlp1ProvEntry | not-accessible | mandatory | An entry in the mscTdmaCsRlp1ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.135.6.10.1.1 | ColumnmscTdmaCsRlp1T1ResponseTimer | read-write | mandatory | This attribute specifies the time the receiving Radio Link Protocol (RLP1) entity shall wait for a response from the peer TIA-136-310 (formerly IS-130) applica… |
| 1.3.6.1.4.1.562.36.2.1.135.6.10.1.2 | ColumnmscTdmaCsRlp1T2LinkActivityTimer | read-write | mandatory | This attribute specifies the maximum time the receiving Radio Link Protocol (RLP1) entity shall wait for link activity. During the Exchange Information (XID) n… |
| 1.3.6.1.4.1.562.36.2.1.135.6.10.1.3 | ColumnmscTdmaCsRlp1T3PeerAckTimer | read-write | mandatory | This attribute specifies the maximum time the receiving Radio Link Protocol (RLP1) entity shall wait for the peer to ACK or NAK data. During the Exchange Infor… |
| 1.3.6.1.4.1.562.36.2.1.135.7 | NodemscTdmaCsV42 | |||
| 1.3.6.1.4.1.562.36.2.1.135.7.1 | TablemscTdmaCsV42RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCsV42 components. |
| 1.3.6.1.4.1.562.36.2.1.135.7.1.1 | RowmscTdmaCsV42RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCsV42 component. |
| 1.3.6.1.4.1.562.36.2.1.135.7.1.1.1 | ColumnmscTdmaCsV42RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCsV42 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.135.7.1.1.2 | ColumnmscTdmaCsV42ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.7.1.1.4 | ColumnmscTdmaCsV42StorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCsV42 tables. |
| 1.3.6.1.4.1.562.36.2.1.135.7.1.1.10 | ColumnmscTdmaCsV42Index | not-accessible | mandatory | This variable represents the index for the mscTdmaCsV42 tables. |
| 1.3.6.1.4.1.562.36.2.1.135.7.10 | TablemscTdmaCsV42ProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the V.42 protocol used for the calls set up by this particular IwfCallServer. Changes to these attributes … |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1 | RowmscTdmaCsV42ProvEntry | not-accessible | mandatory | An entry in the mscTdmaCsV42ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.1 | ColumnmscTdmaCsV42T400DetectTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP i… |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.2 | ColumnmscTdmaCsV42T401AckTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF waits for an acknowledgment before retransmitting a frame. Since information about the T401 ti… |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.3 | ColumnmscTdmaCsV42T402AckDelayTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF may wait following the receipt of any frame requiring a reply before it initiates transmission… |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.4 | ColumnmscTdmaCsV42T403IdleProbeTimer | read-write | mandatory | This attribute specifies the maximum amount of time that the IWF allows to elapse without frames being exchanged. The link is permitted to remain idle with no … |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.5 | ColumnmscTdmaCsV42TxN401FrameSize | read-write | mandatory | This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) f… |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.6 | ColumnmscTdmaCsV42RxN401FrameSize | read-write | mandatory | This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) f… |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.7 | ColumnmscTdmaCsV42TxKWindowSize | read-write | mandatory | This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the remote entity. The default value… |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.8 | ColumnmscTdmaCsV42RxKWindowSize | read-write | mandatory | This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity to the IWF. The default value… |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.9 | ColumnmscTdmaCsV42N400RetransLimit | read-write | mandatory | This attribute specifies the maximum number of times the IWF retransmits a frame upon expiry of t401AckTimer before appropriate recovery action is taken. Infor… |
| 1.3.6.1.4.1.562.36.2.1.135.7.10.1.10 | ColumnmscTdmaCsV42FcsLength | read-write | mandatory | This attribute specifies whether a 16 bit or a 32 bit Frame Check Sequence (FCS) will be used for the link between the IWF and the far end DCE. This attribute … |
| 1.3.6.1.4.1.562.36.2.1.135.8 | NodemscTdmaCsV42Bis | |||
| 1.3.6.1.4.1.562.36.2.1.135.8.1 | TablemscTdmaCsV42BisRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCsV42Bis components. |
| 1.3.6.1.4.1.562.36.2.1.135.8.1.1 | RowmscTdmaCsV42BisRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCsV42Bis component. |
| 1.3.6.1.4.1.562.36.2.1.135.8.1.1.1 | ColumnmscTdmaCsV42BisRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCsV42Bis components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.135.8.1.1.2 | ColumnmscTdmaCsV42BisComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.8.1.1.4 | ColumnmscTdmaCsV42BisStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCsV42Bis tables. |
| 1.3.6.1.4.1.562.36.2.1.135.8.1.1.10 | ColumnmscTdmaCsV42BisIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaCsV42Bis tables. |
| 1.3.6.1.4.1.562.36.2.1.135.8.10 | TablemscTdmaCsV42BisProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the V.42bis data compression protocol parameters used for the calls set up by this particular CallServer. … |
| 1.3.6.1.4.1.562.36.2.1.135.8.10.1 | RowmscTdmaCsV42BisProvEntry | not-accessible | mandatory | An entry in the mscTdmaCsV42BisProvTable. |
| 1.3.6.1.4.1.562.36.2.1.135.8.10.1.1 | ColumnmscTdmaCsV42BisP0CompressionDirection | read-write | mandatory | This attribute specifies the V.42bis data compression direction to be supported. The value for compression direction is negotiated at link setup by the data li… |
| 1.3.6.1.4.1.562.36.2.1.135.8.10.1.2 | ColumnmscTdmaCsV42BisP1MaximumCodewords | read-write | mandatory | This attribute specifies the maximum number of V.42bis codewords the IWF supports. A codeword is a binary number that represents a string of characters in comp… |
| 1.3.6.1.4.1.562.36.2.1.135.8.10.1.3 | ColumnmscTdmaCsV42BisP2MaximumStringSize | read-write | mandatory | This attribute specifies the maximum number of characters allowed in a string represented by a codeword that the IWF supports. Each codeword in a V.42bis dicti… |
| 1.3.6.1.4.1.562.36.2.1.135.8.10.1.4 | ColumnmscTdmaCsV42BisActionOnError | read-write | mandatory | This attribute specifies whether or not V.42bis takes down the call or resets the link when any of the following errors occur: 1.Receipt of STEPUP (step up cod… |
| 1.3.6.1.4.1.562.36.2.1.135.9 | NodemscTdmaCsLp | |||
| 1.3.6.1.4.1.562.36.2.1.135.9.1 | TablemscTdmaCsLpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaCsLp components. |
| 1.3.6.1.4.1.562.36.2.1.135.9.1.1 | RowmscTdmaCsLpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaCsLp component. |
| 1.3.6.1.4.1.562.36.2.1.135.9.1.1.1 | ColumnmscTdmaCsLpRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscTdmaCsLp components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.135.9.1.1.2 | ColumnmscTdmaCsLpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.135.9.1.1.4 | ColumnmscTdmaCsLpStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaCsLp tables. |
| 1.3.6.1.4.1.562.36.2.1.135.9.1.1.10 | ColumnmscTdmaCsLpIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaCsLp tables. |
| 1.3.6.1.4.1.562.36.2.1.135.9.10 | TablemscTdmaCsLpOperTable | not-accessible | mandatory | This group contains operational attributes pertaining to information about TdmaIwfBearerChannels and TdmaIwfLogicalProcessor associated with a TdmaIwfCallServe… |
| 1.3.6.1.4.1.562.36.2.1.135.9.10.1 | RowmscTdmaCsLpOperEntry | not-accessible | mandatory | An entry in the mscTdmaCsLpOperTable. |
| 1.3.6.1.4.1.562.36.2.1.135.9.10.1.1 | ColumnmscTdmaCsLpConfiguredBearerChannels | read-only | mandatory | This attribute indicates the number of TdmaIwfBearerChannel components provisioned for the TdmaIwfLogicalProcessor represented by this component. |
| 1.3.6.1.4.1.562.36.2.1.135.9.10.1.2 | ColumnmscTdmaCsLpActiveCalls | read-only | mandatory | This attribute indicates the number of calls currently active on this LogicalProcessor. |
| 1.3.6.1.4.1.562.36.2.1.135.9.10.1.3 | ColumnmscTdmaCsLpModemsSupported | read-only | mandatory | This attribute indicates if modems are supported with this TdmaIwfLogicalProcessor. This attribute has one of the following values: yes: Modems are supported w… |
| 1.3.6.1.4.1.562.36.2.1.135.100 | TablemscTdmaCsServProvTable | not-accessible | mandatory | This group contains all the necessary timers for call setup and call clearing scenarios on the IWF. |
| 1.3.6.1.4.1.562.36.2.1.135.100.1 | RowmscTdmaCsServProvEntry | not-accessible | mandatory | An entry in the mscTdmaCsServProvTable. |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.1 | ColumnmscTdmaCsTIwf1 | read-write | mandatory | This is an internal timer to the call server of the IWF and is used during call setup for ensuring the MIT protocol stack and the NIT modem for a new call have… |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.2 | ColumnmscTdmaCsTIwf2 | read-write | mandatory | This is an internal timer to the call server of the IWF and is used during call clearing for ensuring the MIT protocol stack and NIT modem for a call have been… |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.3 | ColumnmscTdmaCsT303 | read-write | mandatory | This timer is a call setup timer and is used for ensuring a CallProceeding message is received for a Setup message that has been sent by the IWF to the MTX. |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.4 | ColumnmscTdmaCsT305 | read-write | mandatory | This timer is a call clearing timer and is used for ensuring a Release message is received for a Disconnect message the IWF has sent to the MTX. |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.5 | ColumnmscTdmaCsT308 | read-write | mandatory | This timer is a call clearing timer and is used for ensuring a ReleaseComplete message is received for the Release message the IWF has sent to the MTX. |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.6 | ColumnmscTdmaCsT313 | read-write | mandatory | This is a call setup timer and is used for ensuring a ConnectAck message is received in response for the Connect message the IWF has sent to the MTX. |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.7 | ColumnmscTdmaCsT999 | read-write | mandatory | This timer is used during a mobile termination call setup and is used for ensuring the Setup message is received from the MTX. |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.8 | ColumnmscTdmaCsSupportedTechnology | read-write | mandatory | This attribute specifies the wireless technology that is supported for data calls on this IWF. |
| 1.3.6.1.4.1.562.36.2.1.135.100.1.9 | ColumnmscTdmaCsSupportedService | read-write | mandatory | This attribute specifies the type(s) of data calls this IWF supports. |
| 1.3.6.1.4.1.562.36.2.1.135.101 | TablemscTdmaCsMiscProvTable | not-accessible | mandatory | This group contains general provisioning data for the TdmaIwfCallServer that does not fit within other provisioning groups. |
| 1.3.6.1.4.1.562.36.2.1.135.101.1 | RowmscTdmaCsMiscProvEntry | not-accessible | mandatory | An entry in the mscTdmaCsMiscProvTable. |
| 1.3.6.1.4.1.562.36.2.1.135.101.1.1 | ColumnmscTdmaCsCommentText | read-write | mandatory | Use of this attribute is at the discretion of the system administrator. Typically, this attribute is used to specify the name of the DMS- MTX configured for th… |
| 1.3.6.1.4.1.562.36.2.1.135.101.1.2 | ColumnmscTdmaCsMscIpAddress | read-write | mandatory | This attribute specifies the Internet Protocol (IP) Address of the Mobile Telephone Exchange (MTX) that is permitted to set up MTX InterWorking Function (IWF) … |
| 1.3.6.1.4.1.562.36.2.1.135.101.1.3 | ColumnmscTdmaCsVirtualRouterName | read-write | mandatory | This attribute specifies the virtual router that this TdmaIwfCallServer uses for transmitting and receiving signaling messages to and from the DMS-MTX. |
| 1.3.6.1.4.1.562.36.2.1.135.101.1.4 | ColumnmscTdmaCsVoiceLaw | read-write | mandatory | This attribute specifies the voice law to be established for the IWF to PSTN modem link for calls established by this TdmaIwfCallServer. This attribute has one… |
| 1.3.6.1.4.1.562.36.2.1.135.103 | TablemscTdmaCsCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.135.103.1 | RowmscTdmaCsCidDataEntry | not-accessible | mandatory | An entry in the mscTdmaCsCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.135.103.1.1 | ColumnmscTdmaCsCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.135.104 | TablemscTdmaCsStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.135.104.1 | RowmscTdmaCsStateEntry | not-accessible | mandatory | An entry in the mscTdmaCsStateTable. |
| 1.3.6.1.4.1.562.36.2.1.135.104.1.1 | ColumnmscTdmaCsAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.135.104.1.2 | ColumnmscTdmaCsOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.135.104.1.3 | ColumnmscTdmaCsUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.135.121 | TablemscTdmaCsStatsTable | not-accessible | mandatory | This group contains operational attributes that measure the performance used for the calls set up by this particular TdmaIwfCallServer. |
| 1.3.6.1.4.1.562.36.2.1.135.121.1 | RowmscTdmaCsStatsEntry | not-accessible | mandatory | An entry in the mscTdmaCsStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.135.121.1.1 | ColumnmscTdmaCsCurrentCalls | read-only | mandatory | This attribute indicates the number of active calls currently serviced by this particular TdmaIwfCallServer. |
| 1.3.6.1.4.1.562.36.2.1.135.121.1.2 | ColumnmscTdmaCsCallsRequested | read-only | mandatory | This attribute counts the number of IWF call setup requests received at this particular TdmaIwfCallServer from the DMS-MTX. The counter wraps when it exceeds t… |
| 1.3.6.1.4.1.562.36.2.1.135.121.1.3 | ColumnmscTdmaCsCallsSetUp | read-only | mandatory | This attribute counts the number of IWF calls successfully setup by this particular TdmaIwfCallServer. A call is considered setup when the IWF-Setup-Request me… |
| 1.3.6.1.4.1.562.36.2.1.135.121.1.4 | ColumnmscTdmaCsCallsReleasedNormal | read-only | mandatory | This attribute counts the number of IWF calls that have completed successfully on this particular TdmaIwfCallServer. The counter wraps when it exceeds the maxi… |
| 1.3.6.1.4.1.562.36.2.1.135.121.1.5 | ColumnmscTdmaCsCallsReleasedAbnormal | read-only | mandatory | This attribute counts the number of IWF calls that have been released due to error conditions at this particular TdmaIwfCallServer or one if its TdmaIwfBearerC… |
| 1.3.6.1.4.1.562.36.2.1.135.121.1.6 | ColumnmscTdmaCsErroredLFrames | read-only | mandatory | This attribute counts the number of CM/IWF Control Interface (CCI) messages received from the DMS-MTX that have an incorrect format. The counter wraps when it … |
| 1.3.6.1.4.1.562.36.2.1.136 | NodemscTdmaBc | |||
| 1.3.6.1.4.1.562.36.2.1.136.1 | TablemscTdmaBcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBc components. |
| 1.3.6.1.4.1.562.36.2.1.136.1.1 | RowmscTdmaBcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBc component. |
| 1.3.6.1.4.1.562.36.2.1.136.1.1.1 | ColumnmscTdmaBcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.1.1.2 | ColumnmscTdmaBcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.1.1.4 | ColumnmscTdmaBcStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBc tables. |
| 1.3.6.1.4.1.562.36.2.1.136.1.1.10 | ColumnmscTdmaBcCsIndex | not-accessible | mandatory | This variable represents an index for the mscTdmaBc tables. |
| 1.3.6.1.4.1.562.36.2.1.136.1.1.11 | ColumnmscTdmaBcBcIndex | not-accessible | mandatory | This variable represents an index for the mscTdmaBc tables. |
| 1.3.6.1.4.1.562.36.2.1.136.2 | NodemscTdmaBcFramer | |||
| 1.3.6.1.4.1.562.36.2.1.136.2.1 | TablemscTdmaBcFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcFramer components. |
| 1.3.6.1.4.1.562.36.2.1.136.2.1.1 | RowmscTdmaBcFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcFramer component. |
| 1.3.6.1.4.1.562.36.2.1.136.2.1.1.1 | ColumnmscTdmaBcFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.2.1.1.2 | ColumnmscTdmaBcFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.2.1.1.4 | ColumnmscTdmaBcFramerStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.136.2.1.1.10 | ColumnmscTdmaBcFramerIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaBcFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.136.2.10 | TablemscTdmaBcFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.36.2.1.136.2.10.1 | RowmscTdmaBcFramerProvEntry | not-accessible | mandatory | An entry in the mscTdmaBcFramerProvTable. |
| 1.3.6.1.4.1.562.36.2.1.136.2.10.1.1 | ColumnmscTdmaBcFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.36.2.1.136.2.11 | TablemscTdmaBcFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a TdmaIwfFramer component. |
| 1.3.6.1.4.1.562.36.2.1.136.2.11.1 | RowmscTdmaBcFramerStatsEntry | not-accessible | mandatory | An entry in the mscTdmaBcFramerStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.136.2.11.1.1 | ColumnmscTdmaBcFramerTxFrames | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.2.11.1.2 | ColumnmscTdmaBcFramerRxFrames | read-only | mandatory | This attribute counts the number of frames received from the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.2.11.1.3 | ColumnmscTdmaBcFramerRxBytes | read-only | mandatory | This attribute counts the number of bytes received from the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.2.12 | TablemscTdmaBcFramerLinkTable | not-accessible | mandatory | This group contains provisionable attributes for the TdmaIwfFramer which controls link layer framing for application components sending and receiving data on a… |
| 1.3.6.1.4.1.562.36.2.1.136.2.12.1 | RowmscTdmaBcFramerLinkEntry | not-accessible | mandatory | An entry in the mscTdmaBcFramerLinkTable. |
| 1.3.6.1.4.1.562.36.2.1.136.2.12.1.1 | ColumnmscTdmaBcFramerFramingType | read-write | mandatory | This attribute indicates the type of framing for the link layer data received and transmitted on this channel. This attribute has one of the following values: … |
| 1.3.6.1.4.1.562.36.2.1.136.2.13 | TablemscTdmaBcFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.136.2.13.1 | RowmscTdmaBcFramerStateEntry | not-accessible | mandatory | An entry in the mscTdmaBcFramerStateTable. |
| 1.3.6.1.4.1.562.36.2.1.136.2.13.1.1 | ColumnmscTdmaBcFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.136.2.13.1.2 | ColumnmscTdmaBcFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.136.2.13.1.3 | ColumnmscTdmaBcFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.136.3 | NodemscTdmaBcModem | |||
| 1.3.6.1.4.1.562.36.2.1.136.3.1 | TablemscTdmaBcModemRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcModem components. |
| 1.3.6.1.4.1.562.36.2.1.136.3.1.1 | RowmscTdmaBcModemRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcModem component. |
| 1.3.6.1.4.1.562.36.2.1.136.3.1.1.1 | ColumnmscTdmaBcModemRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcModem components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.3.1.1.2 | ColumnmscTdmaBcModemComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.3.1.1.4 | ColumnmscTdmaBcModemStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcModem tables. |
| 1.3.6.1.4.1.562.36.2.1.136.3.1.1.10 | ColumnmscTdmaBcModemIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaBcModem tables. |
| 1.3.6.1.4.1.562.36.2.1.136.3.10 | TablemscTdmaBcModemOperTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the modem component for this particular TdmaIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1 | RowmscTdmaBcModemOperEntry | not-accessible | mandatory | An entry in the mscTdmaBcModemOperTable. |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.1 | ColumnmscTdmaBcModemVoiceLaw | read-only | mandatory | This attribute indicates the active voice law associated with the modem component. This attribute has one of the following values: aLaw and muLaw. Both protoco… |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.2 | ColumnmscTdmaBcModemRate | read-only | mandatory | This attribute indicates the transmission rate of the current modem in use. All rates are the same in both the transmit and receive directions. |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.3 | ColumnmscTdmaBcModemModemAlgorithmInUse | read-only | mandatory | This attribute indicates the current modem algorithm(s) active for the channel. This attribute has one of the following values: t30: T.30 is active. T.30 is th… |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.4 | ColumnmscTdmaBcModemProtocolState | read-only | mandatory | This attribute indicates the active protocol state of the modem in use.This attribute has one of the following values: idle: Modem is in an inactive state and … |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.5 | ColumnmscTdmaBcModemMobileSideFlowControlState | read-only | mandatory | This attribute indicates the state of flow control based on whether flow control was requested by the mobile side of the connection and an indication was sent … |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.6 | ColumnmscTdmaBcModemPstnSideFlowControlState | read-only | mandatory | This attribute indicates the state of flow control based on whether flow control was requested by the PSTN side of the connection and an indication was sent to… |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.7 | ColumnmscTdmaBcModemAsyncMode | read-only | mandatory | This attribute indicates whether conversion between synchronous and asynchronous data format (specifically, the stripping or insertion of start and stop bits) … |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.8 | ColumnmscTdmaBcModemOutbandFlowControl | read-only | mandatory | This attribute indicates whether outband flow control conversions are being performed. If outband flow control is on, then when the Modem Application Layer (MA… |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.9 | ColumnmscTdmaBcModemOutbandBreak | read-only | mandatory | This attribute indicates whether inband or outband break control conversions are being performed. If outband break control is on, when the modem detects a brea… |
| 1.3.6.1.4.1.562.36.2.1.136.3.10.1.10 | ColumnmscTdmaBcModemAutobaud | read-only | mandatory | This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the DMS-MTX on the following: (1) the initial modem data rat… |
| 1.3.6.1.4.1.562.36.2.1.136.3.11 | TablemscTdmaBcModemStatsTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the modem component for this particular TdmaIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.136.3.11.1 | RowmscTdmaBcModemStatsEntry | not-accessible | mandatory | An entry in the mscTdmaBcModemStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.136.3.11.1.1 | ColumnmscTdmaBcModemTxBytes | read-only | mandatory | This attribute counts the number of payload bytes transmitted. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.3.11.1.2 | ColumnmscTdmaBcModemRxBytes | read-only | mandatory | This attribute counts the number of payload bytes received. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.3.11.1.3 | ColumnmscTdmaBcModemFramingErrors | read-only | mandatory | This attribute counts the number of framing errors detected by the hardware. This is the absence of a stop bit after a start bit and eight bits of data. All in… |
| 1.3.6.1.4.1.562.36.2.1.136.4 | NodemscTdmaBcFax | |||
| 1.3.6.1.4.1.562.36.2.1.136.4.1 | TablemscTdmaBcFaxRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcFax components. |
| 1.3.6.1.4.1.562.36.2.1.136.4.1.1 | RowmscTdmaBcFaxRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcFax component. |
| 1.3.6.1.4.1.562.36.2.1.136.4.1.1.1 | ColumnmscTdmaBcFaxRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcFax components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.4.1.1.2 | ColumnmscTdmaBcFaxComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.4.1.1.4 | ColumnmscTdmaBcFaxStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcFax tables. |
| 1.3.6.1.4.1.562.36.2.1.136.4.1.1.10 | ColumnmscTdmaBcFaxIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaBcFax tables. |
| 1.3.6.1.4.1.562.36.2.1.136.4.10 | TablemscTdmaBcFaxOperTable | not-accessible | mandatory | This group contains operational attributes which measure the performance of the fax protocol. |
| 1.3.6.1.4.1.562.36.2.1.136.4.10.1 | RowmscTdmaBcFaxOperEntry | not-accessible | mandatory | An entry in the mscTdmaBcFaxOperTable. |
| 1.3.6.1.4.1.562.36.2.1.136.4.10.1.1 | ColumnmscTdmaBcFaxActiveMode | read-only | mandatory | This attribute indicates the mode of the fax T.30 protocol, determined during Exchange Identification (XID) negotiations. The following modes are supported: no… |
| 1.3.6.1.4.1.562.36.2.1.136.4.10.1.2 | ColumnmscTdmaBcFaxProtocolState | read-only | mandatory | This attribute indicates the protocol state of the fax adaptor. This attribute has one of the following values: setup: Call setup state. idle: Idle state only … |
| 1.3.6.1.4.1.562.36.2.1.136.4.10.1.3 | ColumnmscTdmaBcFaxMessageRate | read-only | mandatory | This attribute indicates the fax message rate used for sending fax documents. |
| 1.3.6.1.4.1.562.36.2.1.136.4.11 | TablemscTdmaBcFaxStatsTable | not-accessible | mandatory | This group contains statistical attributes which measure the performance of the fax protocol. |
| 1.3.6.1.4.1.562.36.2.1.136.4.11.1 | RowmscTdmaBcFaxStatsEntry | not-accessible | mandatory | An entry in the mscTdmaBcFaxStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.136.4.11.1.1 | ColumnmscTdmaBcFaxTxPagesToMobile | read-only | mandatory | The attribute counts the number of fax pages transmitted to the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.4.11.1.2 | ColumnmscTdmaBcFaxRxPagesFromMobile | read-only | mandatory | This attribute counts the number of fax pages received from the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.5 | NodemscTdmaBcDce | |||
| 1.3.6.1.4.1.562.36.2.1.136.5.1 | TablemscTdmaBcDceRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcDce components. |
| 1.3.6.1.4.1.562.36.2.1.136.5.1.1 | RowmscTdmaBcDceRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcDce component. |
| 1.3.6.1.4.1.562.36.2.1.136.5.1.1.1 | ColumnmscTdmaBcDceRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcDce components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.5.1.1.2 | ColumnmscTdmaBcDceComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.5.1.1.4 | ColumnmscTdmaBcDceStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcDce tables. |
| 1.3.6.1.4.1.562.36.2.1.136.5.1.1.10 | ColumnmscTdmaBcDceIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaBcDce tables. |
| 1.3.6.1.4.1.562.36.2.1.136.6 | NodemscTdmaBcDsc | |||
| 1.3.6.1.4.1.562.36.2.1.136.6.1 | TablemscTdmaBcDscRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcDsc components. |
| 1.3.6.1.4.1.562.36.2.1.136.6.1.1 | RowmscTdmaBcDscRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcDsc component. |
| 1.3.6.1.4.1.562.36.2.1.136.6.1.1.1 | ColumnmscTdmaBcDscRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcDsc components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.6.1.1.2 | ColumnmscTdmaBcDscComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.6.1.1.4 | ColumnmscTdmaBcDscStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcDsc tables. |
| 1.3.6.1.4.1.562.36.2.1.136.6.1.1.10 | ColumnmscTdmaBcDscIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaBcDsc tables. |
| 1.3.6.1.4.1.562.36.2.1.136.6.10 | TablemscTdmaBcDscOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of the DSC asynchronous data service. |
| 1.3.6.1.4.1.562.36.2.1.136.6.10.1 | RowmscTdmaBcDscOperEntry | not-accessible | mandatory | An entry in the mscTdmaBcDscOperTable. |
| 1.3.6.1.4.1.562.36.2.1.136.6.10.1.1 | ColumnmscTdmaBcDscP0CompressionDirection | read-only | mandatory | This attribute indicates the direction of compression requested from logical link 0 (LL0). This attribute has one of the following values: noCpmpression: No da… |
| 1.3.6.1.4.1.562.36.2.1.136.6.10.1.2 | ColumnmscTdmaBcDscP1CompressionMaximumCodewords | read-only | mandatory | This attribute indicates the maximum number of codewords to be requested from logical link 0 (LL0) for compression. A codeword is a binary number that represen… |
| 1.3.6.1.4.1.562.36.2.1.136.6.10.1.3 | ColumnmscTdmaBcDscP2CompressionMaximumCharacters | read-only | mandatory | This attribute indicates the maximum number of characters that can be represented by a single codeword to be requested from logical link 0 (LL0) for compressio… |
| 1.3.6.1.4.1.562.36.2.1.136.6.11 | TablemscTdmaBcDscStatsTable | not-accessible | mandatory | This group contains statistical attributes that measure the performance of the DSC asynchronous data service. |
| 1.3.6.1.4.1.562.36.2.1.136.6.11.1 | RowmscTdmaBcDscStatsEntry | not-accessible | mandatory | An entry in the mscTdmaBcDscStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.136.6.11.1.1 | ColumnmscTdmaBcDscTxBytes | read-only | mandatory | This attribute counts the number of data bytes relayed by DSC in the transmit direction (towards the mobile). The counter wraps when it exceeds the maximum val… |
| 1.3.6.1.4.1.562.36.2.1.136.6.11.1.2 | ColumnmscTdmaBcDscRxBytes | read-only | mandatory | This attribute counts the number of data bytes relayed by DSC in the receive direction (from the mobile). The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.7 | NodemscTdmaBcRlp1 | |||
| 1.3.6.1.4.1.562.36.2.1.136.7.1 | TablemscTdmaBcRlp1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcRlp1 components. |
| 1.3.6.1.4.1.562.36.2.1.136.7.1.1 | RowmscTdmaBcRlp1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcRlp1 component. |
| 1.3.6.1.4.1.562.36.2.1.136.7.1.1.1 | ColumnmscTdmaBcRlp1RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcRlp1 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.7.1.1.2 | ColumnmscTdmaBcRlp1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.7.1.1.4 | ColumnmscTdmaBcRlp1StorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcRlp1 tables. |
| 1.3.6.1.4.1.562.36.2.1.136.7.1.1.10 | ColumnmscTdmaBcRlp1Index | not-accessible | mandatory | This variable represents the index for the mscTdmaBcRlp1 tables. |
| 1.3.6.1.4.1.562.36.2.1.136.7.10 | TablemscTdmaBcRlp1OperTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the TdmaIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.136.7.10.1 | RowmscTdmaBcRlp1OperEntry | not-accessible | mandatory | An entry in the mscTdmaBcRlp1OperTable. |
| 1.3.6.1.4.1.562.36.2.1.136.7.10.1.1 | ColumnmscTdmaBcRlp1Layer3L0ReqWinSize | read-only | mandatory | This attribute indicates the window size for Service Access Point (SAP) 0 requested by layer 3. The window size is the maximum number of sequentially numbered … |
| 1.3.6.1.4.1.562.36.2.1.136.7.10.1.2 | ColumnmscTdmaBcRlp1Layer3L1ReqWinSize1 | read-only | mandatory | This attribute indicates the window size for Service Access Point (SAP) 1 requested by layer 3. The window size is the maximum number of sequentially numbered … |
| 1.3.6.1.4.1.562.36.2.1.136.7.10.1.3 | ColumnmscTdmaBcRlp1T1ResponseTimer | read-only | mandatory | This attribute indicates the current T1 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Informati… |
| 1.3.6.1.4.1.562.36.2.1.136.7.10.1.4 | ColumnmscTdmaBcRlp1T2LinkActivityTimer | read-only | mandatory | This attribute indicates the current T2 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Informati… |
| 1.3.6.1.4.1.562.36.2.1.136.7.10.1.5 | ColumnmscTdmaBcRlp1T3PeerAckTimer | read-only | mandatory | This attribute indicates the current T2 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Informati… |
| 1.3.6.1.4.1.562.36.2.1.136.7.11 | TablemscTdmaBcRlp1StatsTable | not-accessible | mandatory | This group contains operational attributes that measure performance of the TdmaIwfBearerChannel. |
| 1.3.6.1.4.1.562.36.2.1.136.7.11.1 | RowmscTdmaBcRlp1StatsEntry | not-accessible | mandatory | An entry in the mscTdmaBcRlp1StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.136.7.11.1.1 | ColumnmscTdmaBcRlp1TxFrames | read-only | mandatory | This attribute counts the number of valid frames transmitted to the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.7.11.1.2 | ColumnmscTdmaBcRlp1RxFrames | read-only | mandatory | This attributes counts the number of valid frames received from the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.7.11.1.3 | ColumnmscTdmaBcRlp1BadRxFrames | read-only | mandatory | This attribute count the total number of bad RLP1 frames received from the mobile. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.8 | NodemscTdmaBcV42 | |||
| 1.3.6.1.4.1.562.36.2.1.136.8.1 | TablemscTdmaBcV42RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcV42 components. |
| 1.3.6.1.4.1.562.36.2.1.136.8.1.1 | RowmscTdmaBcV42RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcV42 component. |
| 1.3.6.1.4.1.562.36.2.1.136.8.1.1.1 | ColumnmscTdmaBcV42RowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcV42 components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.8.1.1.2 | ColumnmscTdmaBcV42ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.8.1.1.4 | ColumnmscTdmaBcV42StorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcV42 tables. |
| 1.3.6.1.4.1.562.36.2.1.136.8.1.1.10 | ColumnmscTdmaBcV42Index | not-accessible | mandatory | This variable represents the index for the mscTdmaBcV42 tables. |
| 1.3.6.1.4.1.562.36.2.1.136.8.10 | TablemscTdmaBcV42OperTable | not-accessible | mandatory | This group contains operational attributes which measure V.42 error detection and correction performance. |
| 1.3.6.1.4.1.562.36.2.1.136.8.10.1 | RowmscTdmaBcV42OperEntry | not-accessible | mandatory | An entry in the mscTdmaBcV42OperTable. |
| 1.3.6.1.4.1.562.36.2.1.136.8.10.1.1 | ColumnmscTdmaBcV42ProtocolState | read-only | mandatory | This attribute indicates the state of V.42. Valid states are: notActive: The V.42 link connection with the PSTN modem is not established. None of the V.42 func… |
| 1.3.6.1.4.1.562.36.2.1.136.8.10.1.2 | ColumnmscTdmaBcV42TxN401FrameSize | read-only | mandatory | This attribute indicates the current value of parameter N401 for V.42 which is negotiated during Exchange Information (XID). This is the maximum number of octe… |
| 1.3.6.1.4.1.562.36.2.1.136.8.10.1.3 | ColumnmscTdmaBcV42RxN401FrameSize | read-only | mandatory | This attribute indicates the current value of N401, that is negotiated during Exchange Identification (XID). This is the maximum number of octets that can be c… |
| 1.3.6.1.4.1.562.36.2.1.136.8.10.1.4 | ColumnmscTdmaBcV42TxKWindowSize | read-only | mandatory | This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used … |
| 1.3.6.1.4.1.562.36.2.1.136.8.10.1.5 | ColumnmscTdmaBcV42RxKWindowSize | read-only | mandatory | This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used f… |
| 1.3.6.1.4.1.562.36.2.1.136.8.10.1.6 | ColumnmscTdmaBcV42V42ActiveInCall | read-only | mandatory | This attribute indicates whether V42 is really being used in this data call. |
| 1.3.6.1.4.1.562.36.2.1.136.8.10.1.7 | ColumnmscTdmaBcV42V42BisActiveInCall | read-only | mandatory | This attribute indicates whether V42bis is really being used in this data call. |
| 1.3.6.1.4.1.562.36.2.1.136.8.11 | TablemscTdmaBcV42StatsTable | not-accessible | mandatory | This group contains statistical attributes that measure the V.42 error detection and correction performance. |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1 | RowmscTdmaBcV42StatsEntry | not-accessible | mandatory | An entry in the mscTdmaBcV42StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.1 | ColumnmscTdmaBcV42RxIBytes | read-only | mandatory | This attribute counts the total number of bytes that the V.42 actually received from the PSTN modem in a data call. The counter wraps when it exceeds the maxim… |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.2 | ColumnmscTdmaBcV42TxIBytes | read-only | mandatory | This attribute counts the total number of bytes that the V.42 transmitted to the PSTN modem in a data call. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.3 | ColumnmscTdmaBcV42RxIFrames | read-only | mandatory | This attribute counts the total number of Information (I) frames that the V.42 received from the PSTN modem in a data call. The counter wraps when it exceeds t… |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.4 | ColumnmscTdmaBcV42TxIFrames | read-only | mandatory | This attribute counts the total number of information frames that the V.42 transmitted to the PSTN modem in a data call. The counter wraps when it exceeds the … |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.5 | ColumnmscTdmaBcV42RetransmittedFrames | read-only | mandatory | This attribute counts the total number of frames retransmitted by the IWF V.42 entity in a data call. The V.42 retransmits the same frame when the associated T… |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.6 | ColumnmscTdmaBcV42T1AckTimeouts | read-only | mandatory | This attribute counts the total number of times that the T401 timer has timed out within a data call. If this timer times-out frequently, the operator may need… |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.7 | ColumnmscTdmaBcV42RemoteBusyIndications | read-only | mandatory | This attribute counts the total number of times the PSTN modem enters a busy state (the IWF has received a Receive Not Ready message) and asks the IWF V.42 not… |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.8 | ColumnmscTdmaBcV42LocalBusyIndications | read-only | mandatory | This attribute counts the total number of times the IWF V.42 enters in a busy condition and asks the peer to stop sending information frames until it has clear… |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.9 | ColumnmscTdmaBcV42BadFramesRx | read-only | mandatory | This attribute counts the total number of bad frames the IWF V.42 has received from the PSTN remote modem within the data call. In this instance, 'bad frames' … |
| 1.3.6.1.4.1.562.36.2.1.136.8.11.1.10 | ColumnmscTdmaBcV42CrcErrorsRx | read-only | mandatory | This attribute counts the total number of frames received from the remote PSTN modem that contain incorrect frame check sequence. A high value signifies the co… |
| 1.3.6.1.4.1.562.36.2.1.136.9 | NodemscTdmaBcV42Bis | |||
| 1.3.6.1.4.1.562.36.2.1.136.9.1 | TablemscTdmaBcV42BisRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcV42Bis components. |
| 1.3.6.1.4.1.562.36.2.1.136.9.1.1 | RowmscTdmaBcV42BisRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcV42Bis component. |
| 1.3.6.1.4.1.562.36.2.1.136.9.1.1.1 | ColumnmscTdmaBcV42BisRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcV42Bis components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.9.1.1.2 | ColumnmscTdmaBcV42BisComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.9.1.1.4 | ColumnmscTdmaBcV42BisStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcV42Bis tables. |
| 1.3.6.1.4.1.562.36.2.1.136.9.1.1.10 | ColumnmscTdmaBcV42BisIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaBcV42Bis tables. |
| 1.3.6.1.4.1.562.36.2.1.136.9.10 | TablemscTdmaBcV42BisOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of IwfV42bis. |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1 | RowmscTdmaBcV42BisOperEntry | not-accessible | mandatory | An entry in the mscTdmaBcV42BisOperTable. |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1.1 | ColumnmscTdmaBcV42BisProtocolModeEncoder | read-only | mandatory | This attribute indicates the current mode of the IwfV42bis encoder. This mode can be either: transparent: A mode of operation in which compression has been sel… |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1.2 | ColumnmscTdmaBcV42BisProtocolModeDecoder | read-only | mandatory | This attribute indicates the current mode of the V.42bis decoder. This mode can be either: transparent: A mode of operation in which compression has been selec… |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1.3 | ColumnmscTdmaBcV42BisP0CompressionDirection | read-only | mandatory | This attribute indicates the direction in which V.42bis is active, negotiated at link setup by the data link protocol through Exchange Identification (XID) neg… |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1.4 | ColumnmscTdmaBcV42BisP1MaximumCodewords | read-only | mandatory | This attribute indicates the maximum number of codewords in the dictionary negotiated at link setup by the data link protocol by way of the Exchange Identifica… |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1.5 | ColumnmscTdmaBcV42BisP2MaximumStringSize | read-only | mandatory | This attribute indicates the maximum number of characters allowed in a string represented by a codeword negotiated at link setup by the data link protocol by w… |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1.6 | ColumnmscTdmaBcV42BisLastDecodeError | read-only | mandatory | This attribute indicates last error found by the decoder. This attribute has one of the following values: none: No errors found. badStepup: Receipt of STEPUP (… |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1.7 | ColumnmscTdmaBcV42BisCompRatioEncoder | read-only | mandatory | This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being comp… |
| 1.3.6.1.4.1.562.36.2.1.136.9.10.1.8 | ColumnmscTdmaBcV42BisCompRatioDecoder | read-only | mandatory | This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being comp… |
| 1.3.6.1.4.1.562.36.2.1.136.9.11 | TablemscTdmaBcV42BisStatsTable | not-accessible | mandatory | This group contains statistical attributes that measure the performance of IwfV42bis. |
| 1.3.6.1.4.1.562.36.2.1.136.9.11.1 | RowmscTdmaBcV42BisStatsEntry | not-accessible | mandatory | An entry in the mscTdmaBcV42BisStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.136.9.11.1.1 | ColumnmscTdmaBcV42BisModeChangesEncode | read-only | mandatory | This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the encoder. The counter wraps when it e… |
| 1.3.6.1.4.1.562.36.2.1.136.9.11.1.2 | ColumnmscTdmaBcV42BisModeChangesDecode | read-only | mandatory | This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the decoder. The mode changes are determ… |
| 1.3.6.1.4.1.562.36.2.1.136.9.11.1.3 | ColumnmscTdmaBcV42BisResetsEncode | read-only | mandatory | This attribute counts the number of resets sent by the encoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The counter… |
| 1.3.6.1.4.1.562.36.2.1.136.9.11.1.4 | ColumnmscTdmaBcV42BisResetsDecode | read-only | mandatory | This attribute counts the number of resets received by the decoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The res… |
| 1.3.6.1.4.1.562.36.2.1.136.9.11.1.5 | ColumnmscTdmaBcV42BisReinitializations | read-only | mandatory | This attribute counts the number of times V.42bis is reinitialized because of a destructive break (a destructive break is a break that causes data to be discar… |
| 1.3.6.1.4.1.562.36.2.1.136.9.11.1.6 | ColumnmscTdmaBcV42BisErrorsInDecode | read-only | mandatory | This attribute counts the number of errors found by the decoder. The errors could be any of the following: 1.Receipt of STEPUP (step up codeword size) codeword… |
| 1.3.6.1.4.1.562.36.2.1.136.10 | NodemscTdmaBcUr | |||
| 1.3.6.1.4.1.562.36.2.1.136.10.1 | TablemscTdmaBcUrRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscTdmaBcUr components. |
| 1.3.6.1.4.1.562.36.2.1.136.10.1.1 | RowmscTdmaBcUrRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscTdmaBcUr component. |
| 1.3.6.1.4.1.562.36.2.1.136.10.1.1.1 | ColumnmscTdmaBcUrRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscTdmaBcUr components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.136.10.1.1.2 | ColumnmscTdmaBcUrComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.136.10.1.1.4 | ColumnmscTdmaBcUrStorageType | read-only | mandatory | This variable represents the storage type value for the mscTdmaBcUr tables. |
| 1.3.6.1.4.1.562.36.2.1.136.10.1.1.10 | ColumnmscTdmaBcUrIndex | not-accessible | mandatory | This variable represents the index for the mscTdmaBcUr tables. |
| 1.3.6.1.4.1.562.36.2.1.136.10.10 | TablemscTdmaBcUrOperTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of the UpperRelay. |
| 1.3.6.1.4.1.562.36.2.1.136.10.10.1 | RowmscTdmaBcUrOperEntry | not-accessible | mandatory | An entry in the mscTdmaBcUrOperTable. |
| 1.3.6.1.4.1.562.36.2.1.136.10.10.1.1 | ColumnmscTdmaBcUrRxBufferSize | read-only | mandatory | This attribute indicates the size of the receive flow control buffer. This attribute may be viewed via TdmaBc/*,*,*,* UpperRelay. |
| 1.3.6.1.4.1.562.36.2.1.136.10.10.1.2 | ColumnmscTdmaBcUrTxFlowControlState | read-only | mandatory | This attribute indicates whether the transmit flow control is active or not. This attribute has one of the following values: active: The transmit flow control … |
| 1.3.6.1.4.1.562.36.2.1.136.10.10.1.3 | ColumnmscTdmaBcUrRxFlowControlState | read-only | mandatory | This attribute indicates whether the receive flow control is active or not. This attribute has one of the following values: active: The receive flow control is… |
| 1.3.6.1.4.1.562.36.2.1.136.10.11 | TablemscTdmaBcUrStatsTable | not-accessible | mandatory | This group contains operational attributes that measure the performance of the UpperRelay. |
| 1.3.6.1.4.1.562.36.2.1.136.10.11.1 | RowmscTdmaBcUrStatsEntry | not-accessible | mandatory | An entry in the mscTdmaBcUrStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.136.10.11.1.1 | ColumnmscTdmaBcUrTxFrames | read-only | mandatory | This attribute counts the number of frames that are sent in the transmit direction. The counter wraps when it exceeds the maximum value. The counter wraps when… |
| 1.3.6.1.4.1.562.36.2.1.136.10.11.1.2 | ColumnmscTdmaBcUrRxFrames | read-only | mandatory | This attribute counts the number of frames that are sent in the receive direction. The counter wraps when it exceeds the maximum value. |
| 1.3.6.1.4.1.562.36.2.1.136.10.11.1.3 | ColumnmscTdmaBcUrUnacknowledgedFrames | read-only | mandatory | This attribute indicates the current number of frames sent that have not been acknowledged for this instance of the UpperRelay. The counter wraps when it excee… |
| 1.3.6.1.4.1.562.36.2.1.136.10.11.1.4 | ColumnmscTdmaBcUrCumUnacknowledgedFrames | read-only | mandatory | This attribute is the total number of unacknowledged frames for this instance of the UpperRelay. It is not reset when a new call starts. |
| 1.3.6.1.4.1.562.36.2.1.136.101 | TablemscTdmaBcOperTable | not-accessible | mandatory | This group contains operational attributes concerning the operation of this particular TdmaIwfBearerChannel for the current or most recent call. |
| 1.3.6.1.4.1.562.36.2.1.136.101.1 | RowmscTdmaBcOperEntry | not-accessible | mandatory | An entry in the mscTdmaBcOperTable. |
| 1.3.6.1.4.1.562.36.2.1.136.101.1.1 | ColumnmscTdmaBcState | read-only | mandatory | This attribute indicates the current state of the MSC/IWF Interface Protocol (MIP) Message Router (MMR) for an IWF element. This attribute has one of the follo… |
| 1.3.6.1.4.1.562.36.2.1.136.101.1.2 | ColumnmscTdmaBcCallType | read-only | mandatory | This attribute indicates the current call type. This attribute has one of the following values: analogSpeech: Analog speech calls. digitalSpeech: Digital speec… |
| 1.3.6.1.4.1.562.36.2.1.136.101.1.3 | ColumnmscTdmaBcLastResponseCode | read-only | mandatory | This attribute indicates the MSC/IWF Interface Protocol (MIP) Message Router (MMR) response code returned for the last call which was active on this particular… |
| 1.3.6.1.4.1.562.36.2.1.136.101.1.4 | ColumnmscTdmaBcMateBearerChannel | read-only | mandatory | This attribute contains the name of the mate TdmaIwfBearerChannel that this TdmaIwfBearerChannel is involved with in the currently active call. |
| 1.3.6.1.4.1.562.36.2.1.136.103 | TablemscTdmaBcCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.136.103.1 | RowmscTdmaBcCidDataEntry | not-accessible | mandatory | An entry in the mscTdmaBcCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.136.103.1.1 | ColumnmscTdmaBcCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.136.104 | TablemscTdmaBcStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.136.104.1 | RowmscTdmaBcStateEntry | not-accessible | mandatory | An entry in the mscTdmaBcStateTable. |
| 1.3.6.1.4.1.562.36.2.1.136.104.1.1 | ColumnmscTdmaBcAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.136.104.1.2 | ColumnmscTdmaBcOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.136.104.1.3 | ColumnmscTdmaBcUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.2.140 | NodetdmaIwfMIB | |||
| 1.3.6.1.4.1.562.36.2.2.140.1 | NodetdmaIwfGroup | |||
| 1.3.6.1.4.1.562.36.2.2.140.1.1 | NodetdmaIwfGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.140.1.1.3 | NodetdmaIwfGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.140.1.1.3.2 | NodetdmaIwfGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.140.3 | NodetdmaIwfCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.140.3.1 | NodetdmaIwfCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.140.3.1.3 | NodetdmaIwfCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.140.3.1.3.2 | NodetdmaIwfCapabilitiesCA02A |