Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB
91 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.115.2 | NodemscSigChanEQsig | |||
| 1.3.6.1.4.1.562.36.2.1.115.2.1 | TablemscSigChanEQsigRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscSigChanEQsig components. |
| 1.3.6.1.4.1.562.36.2.1.115.2.1.1 | RowmscSigChanEQsigRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscSigChanEQsig component. |
| 1.3.6.1.4.1.562.36.2.1.115.2.1.1.1 | ColumnmscSigChanEQsigRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscSigChanEQsig components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.115.2.1.1.2 | ColumnmscSigChanEQsigComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.115.2.1.1.4 | ColumnmscSigChanEQsigStorageType | read-only | mandatory | This variable represents the storage type value for the mscSigChanEQsig tables. |
| 1.3.6.1.4.1.562.36.2.1.115.2.1.1.10 | ColumnmscSigChanEQsigIndex | not-accessible | mandatory | This variable represents the index for the mscSigChanEQsig tables. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2 | NodemscSigChanEQsigFramer | |||
| 1.3.6.1.4.1.562.36.2.1.115.2.2.1 | TablemscSigChanEQsigFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscSigChanEQsigFramer components. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1 | RowmscSigChanEQsigFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscSigChanEQsigFramer component. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1.1 | ColumnmscSigChanEQsigFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscSigChanEQsigFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1.2 | ColumnmscSigChanEQsigFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1.4 | ColumnmscSigChanEQsigFramerStorageType | read-only | mandatory | This variable represents the storage type value for the mscSigChanEQsigFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.1.1.10 | ColumnmscSigChanEQsigFramerIndex | not-accessible | mandatory | This variable represents the index for the mscSigChanEQsigFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.10 | TablemscSigChanEQsigFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.10.1 | RowmscSigChanEQsigFramerProvEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigFramerProvTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.10.1.1 | ColumnmscSigChanEQsigFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.12 | TablemscSigChanEQsigFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.12.1 | RowmscSigChanEQsigFramerStateEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigFramerStateTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.12.1.1 | ColumnmscSigChanEQsigFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.12.1.2 | ColumnmscSigChanEQsigFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.12.1.3 | ColumnmscSigChanEQsigFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13 | TablemscSigChanEQsigFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1 | RowmscSigChanEQsigFramerStatsEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigFramerStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.1 | ColumnmscSigChanEQsigFramerFrmToIf | read-only | mandatory | This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.2 | ColumnmscSigChanEQsigFramerFrmFromIf | read-only | mandatory | This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.3 | ColumnmscSigChanEQsigFramerOctetFromIf | read-only | mandatory | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.4 | ColumnmscSigChanEQsigFramerAborts | read-only | mandatory | This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.5 | ColumnmscSigChanEQsigFramerCrcErrors | read-only | mandatory | This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.6 | ColumnmscSigChanEQsigFramerLrcErrors | read-only | mandatory | This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.7 | ColumnmscSigChanEQsigFramerNonOctetErrors | read-only | mandatory | This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.8 | ColumnmscSigChanEQsigFramerOverruns | read-only | mandatory | This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.9 | ColumnmscSigChanEQsigFramerUnderruns | read-only | mandatory | This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum valu… |
| 1.3.6.1.4.1.562.36.2.1.115.2.2.13.1.10 | ColumnmscSigChanEQsigFramerLargeFrmErrors | read-only | mandatory | This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after reaching its maximum val… |
| 1.3.6.1.4.1.562.36.2.1.115.2.11 | TablemscSigChanEQsigL2Table | not-accessible | mandatory | This group specifies the provisionable layer 2 attributes of the Q.931 ITU-T protocol. |
| 1.3.6.1.4.1.562.36.2.1.115.2.11.1 | RowmscSigChanEQsigL2Entry | not-accessible | mandatory | An entry in the mscSigChanEQsigL2Table. |
| 1.3.6.1.4.1.562.36.2.1.115.2.11.1.1 | ColumnmscSigChanEQsigT23 | read-write | mandatory | This attribute specifies the layer 2 enable request timer. |
| 1.3.6.1.4.1.562.36.2.1.115.2.11.1.2 | ColumnmscSigChanEQsigT200 | read-write | mandatory | This attribute specifies the maximum time between a layer 2 frame and its acknowledgment. |
| 1.3.6.1.4.1.562.36.2.1.115.2.11.1.3 | ColumnmscSigChanEQsigN200 | read-write | mandatory | This attribute specifies the maximum number of re-transmissions of a layer 2 frame. |
| 1.3.6.1.4.1.562.36.2.1.115.2.11.1.4 | ColumnmscSigChanEQsigT203 | read-write | mandatory | This attribute specifies the maximum time for which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive. |
| 1.3.6.1.4.1.562.36.2.1.115.2.11.1.6 | ColumnmscSigChanEQsigCircuitSwitchedK | read-write | mandatory | This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP… |
| 1.3.6.1.4.1.562.36.2.1.115.2.12 | TablemscSigChanEQsigL3Table | not-accessible | mandatory | This group represents the provisionable Layer 3 timer attributes of the ETSI Qsig protocol. |
| 1.3.6.1.4.1.562.36.2.1.115.2.12.1 | RowmscSigChanEQsigL3Entry | not-accessible | mandatory | An entry in the mscSigChanEQsigL3Table. |
| 1.3.6.1.4.1.562.36.2.1.115.2.12.1.3 | ColumnmscSigChanEQsigT309 | read-write | mandatory | This attribute specifies the data link failure timer; used to ride out temporary failures. |
| 1.3.6.1.4.1.562.36.2.1.115.2.12.1.4 | ColumnmscSigChanEQsigT310 | read-write | mandatory | This attribute specifies the call proceeding state timer. |
| 1.3.6.1.4.1.562.36.2.1.115.2.13 | TablemscSigChanEQsigProvTable | not-accessible | mandatory | This group defines the general options of the D-channel signalling link. |
| 1.3.6.1.4.1.562.36.2.1.115.2.13.1 | RowmscSigChanEQsigProvEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigProvTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.13.1.1 | ColumnmscSigChanEQsigSide | read-write | mandatory | This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the inte… |
| 1.3.6.1.4.1.562.36.2.1.115.2.13.1.2 | ColumnmscSigChanEQsigMaxNonCallConcurrent | read-write | mandatory | This attribute specifies the maximum number of simultaneous active non-call messages that are allowed. |
| 1.3.6.1.4.1.562.36.2.1.115.2.13.1.3 | ColumnmscSigChanEQsigOverlapSendingEnabled | read-write | mandatory | This attribute specifies whether overlap sending to the PBX is enabled. |
| 1.3.6.1.4.1.562.36.2.1.115.2.13.1.4 | ColumnmscSigChanEQsigOverlapReceivingEnabled | read-write | mandatory | This attribute specifies whether overlap receiving from the PBX is enabled. |
| 1.3.6.1.4.1.562.36.2.1.115.2.14 | TablemscSigChanEQsigStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.115.2.14.1 | RowmscSigChanEQsigStateEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigStateTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.14.1.1 | ColumnmscSigChanEQsigAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.115.2.14.1.2 | ColumnmscSigChanEQsigOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.115.2.14.1.3 | ColumnmscSigChanEQsigUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.115.2.15 | TablemscSigChanEQsigStatsTable | not-accessible | mandatory | This group provides the operational components for the EtsiQsig component. |
| 1.3.6.1.4.1.562.36.2.1.115.2.15.1 | RowmscSigChanEQsigStatsEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.15.1.2 | ColumnmscSigChanEQsigTotalCallsToIf | read-only | mandatory | This attribute counts the total number of calls that have been made to the interface. The value wraps when it reaches its maximum. |
| 1.3.6.1.4.1.562.36.2.1.115.2.15.1.3 | ColumnmscSigChanEQsigTotalCallsFromIf | read-only | mandatory | This attribute counts the total number of calls from the interface. The value wraps when it reaches its maximum. |
| 1.3.6.1.4.1.562.36.2.1.115.2.15.1.4 | ColumnmscSigChanEQsigNonCallAssocSessionsToIf | read-only | mandatory | This attribute counts the total number of non-call associated sessions to the interface. The value wraps when it reaches its maximum. |
| 1.3.6.1.4.1.562.36.2.1.115.2.15.1.5 | ColumnmscSigChanEQsigNonCallAssocSessionsFromIf | read-only | mandatory | This attribute counts the total number of non-call associated sessions from the interface. The value wraps when it reaches its maximum. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16 | TablemscSigChanEQsigOperTable | not-accessible | mandatory | This group provides the operational attributes for the EtsiQsig protocol. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16.1 | RowmscSigChanEQsigOperEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigOperTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16.1.1 | ColumnmscSigChanEQsigActiveChannels | read-only | mandatory | This attribute indicates the number of currently active channels. This includes data and voice channels. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16.1.2 | ColumnmscSigChanEQsigActiveVoiceChannels | read-only | mandatory | This attribute indicates the number of channels that are currently carrying voice. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16.1.3 | ColumnmscSigChanEQsigActiveDataChannels | read-only | mandatory | This attribute indicates the number of channels that are currently carrying data. This does not include modem data. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16.1.4 | ColumnmscSigChanEQsigPeakActiveChannels | read-only | mandatory | This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16.1.5 | ColumnmscSigChanEQsigPeakActiveVoiceChannels | read-only | mandatory | This attribute indicates the maximum number of voice channels that have been active on this signalling channel during the last polling period. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16.1.6 | ColumnmscSigChanEQsigPeakActiveDataChannels | read-only | mandatory | This attribute indicates the maximum number of data channels that have been active on this signalling channel during the last polling period. |
| 1.3.6.1.4.1.562.36.2.1.115.2.16.1.7 | ColumnmscSigChanEQsigDChanStatus | read-only | mandatory | This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that th… |
| 1.3.6.1.4.1.562.36.2.1.115.2.17 | TablemscSigChanEQsigToolsTable | not-accessible | mandatory | This contains a series of operational attributes which turn on and off several kinds of tracing. |
| 1.3.6.1.4.1.562.36.2.1.115.2.17.1 | RowmscSigChanEQsigToolsEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigToolsTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.17.1.1 | ColumnmscSigChanEQsigTracing | read-write | mandatory | This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages th… |
| 1.3.6.1.4.1.562.36.2.1.115.2.18 | TablemscSigChanEQsigEQsigSpecificProvTable | not-accessible | mandatory | This group provides EtsiQsig protocol specific provisioning. |
| 1.3.6.1.4.1.562.36.2.1.115.2.18.1 | RowmscSigChanEQsigEQsigSpecificProvEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigEQsigSpecificProvTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.18.1.1 | ColumnmscSigChanEQsigMsgSegmentation | read-write | mandatory | This attribute allows users to enable/disable the EtsiQsig message segmentation service. |
| 1.3.6.1.4.1.562.36.2.1.115.2.18.1.2 | ColumnmscSigChanEQsigE1ChannelNumbers | read-write | mandatory | This attribute is applicable to E1 interfaces only. It specifies the mapping scheme between channel numbers (identified in Layer 3 messages) and timeslot numbe… |
| 1.3.6.1.4.1.562.36.2.1.115.2.19 | TablemscSigChanEQsigEQsigSpecificOpTable | not-accessible | mandatory | This group provides specific operational attributes for the Etsi Qsig protocol. |
| 1.3.6.1.4.1.562.36.2.1.115.2.19.1 | RowmscSigChanEQsigEQsigSpecificOpEntry | not-accessible | mandatory | An entry in the mscSigChanEQsigEQsigSpecificOpTable. |
| 1.3.6.1.4.1.562.36.2.1.115.2.19.1.1 | ColumnmscSigChanEQsigSegmentationAccepted | read-only | mandatory | This attribute counts the total number of times a long Etsi Qsig message has been received from a PBX and forwarded to a Passport subnet. The value wraps when … |
| 1.3.6.1.4.1.562.36.2.1.115.2.19.1.2 | ColumnmscSigChanEQsigSegmentationFailed | read-only | mandatory | This attribute counts the total number of times a long Etsi Qsig message has been received from a PBX and could not be forwarded as is to a Passport subnet due… |
| 1.3.6.1.4.1.562.36.2.2.110 | NodevnetEtsiQsigMIB | |||
| 1.3.6.1.4.1.562.36.2.2.110.1 | NodevnetEtsiQsigGroup | |||
| 1.3.6.1.4.1.562.36.2.2.110.1.1 | NodevnetEtsiQsigGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.110.1.1.3 | NodevnetEtsiQsigGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.110.1.1.3.2 | NodevnetEtsiQsigGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.110.3 | NodevnetEtsiQsigCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.110.3.1 | NodevnetEtsiQsigCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.110.3.1.3 | NodevnetEtsiQsigCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.110.3.1.3.2 | NodevnetEtsiQsigCapabilitiesCA02A |