Nortel-MsCarrier-MscPassport-X25DteMIB
326 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex RowStatus StorageType Unsigned32 |
| Nortel-MsCarrier-MscPassport-TextualConventionsMIB | AsciiString DigitString HexString Link NonReplicated PassportCounter64 |
| Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB | mscComponents mscPassportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.90 | NodemscX25Dte | |||
| 1.3.6.1.4.1.562.36.2.1.90.1 | TablemscX25DteRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscX25Dte components. |
| 1.3.6.1.4.1.562.36.2.1.90.1.1 | RowmscX25DteRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscX25Dte component. |
| 1.3.6.1.4.1.562.36.2.1.90.1.1.1 | ColumnmscX25DteRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscX25Dte components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.90.1.1.2 | ColumnmscX25DteComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.90.1.1.4 | ColumnmscX25DteStorageType | read-only | mandatory | This variable represents the storage type value for the mscX25Dte tables. |
| 1.3.6.1.4.1.562.36.2.1.90.1.1.10 | ColumnmscX25DteIndex | not-accessible | mandatory | This variable represents the index for the mscX25Dte tables. |
| 1.3.6.1.4.1.562.36.2.1.90.2 | NodemscX25DtePeer | |||
| 1.3.6.1.4.1.562.36.2.1.90.2.1 | TablemscX25DtePeerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscX25DtePeer components. |
| 1.3.6.1.4.1.562.36.2.1.90.2.1.1 | RowmscX25DtePeerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscX25DtePeer component. |
| 1.3.6.1.4.1.562.36.2.1.90.2.1.1.1 | ColumnmscX25DtePeerRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscX25DtePeer components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.90.2.1.1.2 | ColumnmscX25DtePeerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.90.2.1.1.4 | ColumnmscX25DtePeerStorageType | read-only | mandatory | This variable represents the storage type value for the mscX25DtePeer tables. |
| 1.3.6.1.4.1.562.36.2.1.90.2.1.1.10 | ColumnmscX25DtePeerIndex | not-accessible | mandatory | This variable represents the index for the mscX25DtePeer tables. |
| 1.3.6.1.4.1.562.36.2.1.90.2.10 | TablemscX25DtePeerIfTable | not-accessible | mandatory | This group provides the administrative set of parameters for the Peer interface. |
| 1.3.6.1.4.1.562.36.2.1.90.2.10.1 | RowmscX25DtePeerIfEntry | not-accessible | mandatory | An entry in the mscX25DtePeerIfTable. |
| 1.3.6.1.4.1.562.36.2.1.90.2.10.1.1 | ColumnmscX25DtePeerEncAddressType | read-write | mandatory | This attribute specifies the encapsulation type for the address of the remote host with which this Peer component allows communication. |
| 1.3.6.1.4.1.562.36.2.1.90.2.10.1.2 | ColumnmscX25DtePeerEncAddress | read-write | mandatory | This attribute specifies the encapsulation address of the remote host with which this Peer component allows communication. This address must correspond with th… |
| 1.3.6.1.4.1.562.36.2.1.90.2.10.1.3 | ColumnmscX25DtePeerX25Address | read-write | mandatory | This attribute specifies the X.25 address that identifies the remote host with which this Peer component allows communication. The remote X.25 interface could … |
| 1.3.6.1.4.1.562.36.2.1.90.2.10.1.4 | ColumnmscX25DtePeerLinkToRemoteGroup | read-write | mandatory | This is a link to a RemoteGroup component. The RemoteGroup components logically divide up the X.25 Interface such that a number of Protocol Ports (and conseque… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12 | TablemscX25DtePeerCpTable | not-accessible | mandatory | This group contains the call parameters used to establish a call to/ from the remote host identified by this Peer component |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1 | RowmscX25DtePeerCpEntry | not-accessible | mandatory | An entry in the mscX25DtePeerCpTable. |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.1 | ColumnmscX25DtePeerInPacketSize | read-write | mandatory | This attribute specifies the default maximum receive packet size in octets. A setting of 0 indicates the inPacketSize setting for the X.25 interface (in X25Dte… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.2 | ColumnmscX25DtePeerOutPacketSize | read-write | mandatory | This attribute specifies the default maximum transmit packet size in octets. A setting of 0 indicates the outPacketSize setting for the X.25 interface (in the … |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.3 | ColumnmscX25DtePeerInWindowSize | read-write | mandatory | This attribute specifies the default receive window size. A window size of 0 indicates the inWindowSize setting for the X.25 interface (in the X25Dte component… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.4 | ColumnmscX25DtePeerOutWindowSize | read-write | mandatory | This attribute specifies the default transmit window size. A window size of 0 indicates the outWindowSize setting for the X.25 interface is used during call se… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.5 | ColumnmscX25DtePeerAcceptReverseCharging | read-write | mandatory | This attribute specifies whether the local end will accept or refuse charges for a call from the remote host identified by this Peer component. A value of defa… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.6 | ColumnmscX25DtePeerProposeReverseCharging | read-write | mandatory | This attribute specifies whether local/reverse charging is signalled in a call request packet. A value of default indicates the use of the value from the propo… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.8 | ColumnmscX25DtePeerOutThroughputClassSize | read-write | mandatory | This attribute specifies the value of the transmit throughput class to be negotiated. A value of default indicates the use of the value from the outThroughputC… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.9 | ColumnmscX25DtePeerInThroughputClassSize | read-write | mandatory | This attribute specifies the value of the receive throughput class to be negotiated. A value of default indicates the use of the value from the inThroughputCla… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.10 | ColumnmscX25DtePeerCugIndex | read-write | mandatory | This attribute specifies the index of the Closed User Group facility to signal. A value of 'DEF' indicates the use of the value from the cugIndex attribute of … |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.11 | ColumnmscX25DtePeerCugoaIndex | read-write | mandatory | This attribute specifies the index of the Closed User Group with Outgoing Access facility to signal. A value of 'DEF' indicates the use of the value from the c… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.12 | ColumnmscX25DtePeerNetworkUserIdentifier | read-write | mandatory | This attribute specifies the Network User Identifier facility to signal. A value of null (empty string) indicates no NUI facility is to be signalled. |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.13 | ColumnmscX25DtePeerChargingInformation | read-write | mandatory | This attribute specifies whether the charging information facility is signalled in the call request packet. A value of default indicates the use of the value f… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.14 | ColumnmscX25DtePeerRpoa | read-write | mandatory | This attribute specifies the RPOA facility to signal in a call request packet. A value of 'DEF' indicates the use of the value from the rpoa attribute of the X… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.15 | ColumnmscX25DtePeerTrnstDlySlctnAInd | read-write | mandatory | This attribute specifies the value of the Transit Delay Selection and Indication facility to signal in a call request packet. A value of 65536 indicates no fac… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.24 | ColumnmscX25DtePeerCallingNetworkFax | read-write | mandatory | This attribute specifies the Calling Network facilities to signal in a call request packet. The facilities are encoded here exactly as they are encoded in the … |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.25 | ColumnmscX25DtePeerCalledNetworkFax | read-write | mandatory | This attribute specifies the Called Network facilities to signal in a call request packet. The facilities are encoded here exactly as they are encoded in the c… |
| 1.3.6.1.4.1.562.36.2.1.90.2.12.1.26 | ColumnmscX25DtePeerCallUserData | read-only | mandatory | This attribute specifies the user data to signal in a call request packet. A value of null (empty string) indicates that the callUserData from the X25Dte is to… |
| 1.3.6.1.4.1.562.36.2.1.90.2.208 | TablemscX25DtePeerPEncTable | not-accessible | mandatory | Each instance of this replicated attribute describes an encapsulation method permitted for encapsulating the protocol data units (PDUs) of an upper layer proto… |
| 1.3.6.1.4.1.562.36.2.1.90.2.208.1 | RowmscX25DtePeerPEncEntry | not-accessible | mandatory | An entry in the mscX25DtePeerPEncTable. |
| 1.3.6.1.4.1.562.36.2.1.90.2.208.1.1 | ColumnmscX25DtePeerPEncIndex | not-accessible | mandatory | This variable represents the index for the mscX25DtePeerPEncTable. |
| 1.3.6.1.4.1.562.36.2.1.90.2.208.1.2 | ColumnmscX25DtePeerPEncValue | read-write | mandatory | This variable represents an individual value for the mscX25DtePeerPEncTable. |
| 1.3.6.1.4.1.562.36.2.1.90.2.208.1.3 | ColumnmscX25DtePeerPEncRowStatus | write-only | mandatory | This variable is used to control the addition and deletion of individual values of the mscX25DtePeerPEncTable. |
| 1.3.6.1.4.1.562.36.2.1.90.2.209 | TablemscX25DtePeerLcnTable | not-accessible | mandatory | This attribute specifies the local logical channel numbers (Lcn) in use for the X.25 calls to the remote host identified by this Peer component. |
| 1.3.6.1.4.1.562.36.2.1.90.2.209.1 | RowmscX25DtePeerLcnEntry | not-accessible | mandatory | An entry in the mscX25DtePeerLcnTable. |
| 1.3.6.1.4.1.562.36.2.1.90.2.209.1.1 | ColumnmscX25DtePeerLcnValue | read-only | mandatory | This variable represents both the value and the index for the mscX25DtePeerLcnTable. |
| 1.3.6.1.4.1.562.36.2.1.90.3 | NodemscX25DtePLcn | |||
| 1.3.6.1.4.1.562.36.2.1.90.3.1 | TablemscX25DtePLcnRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscX25DtePLcn components. |
| 1.3.6.1.4.1.562.36.2.1.90.3.1.1 | RowmscX25DtePLcnRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscX25DtePLcn component. |
| 1.3.6.1.4.1.562.36.2.1.90.3.1.1.1 | ColumnmscX25DtePLcnRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscX25DtePLcn components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.90.3.1.1.2 | ColumnmscX25DtePLcnComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.90.3.1.1.4 | ColumnmscX25DtePLcnStorageType | read-only | mandatory | This variable represents the storage type value for the mscX25DtePLcn tables. |
| 1.3.6.1.4.1.562.36.2.1.90.3.1.1.10 | ColumnmscX25DtePLcnIndex | not-accessible | mandatory | This variable represents the index for the mscX25DtePLcn tables. |
| 1.3.6.1.4.1.562.36.2.1.90.3.10 | TablemscX25DtePLcnProvTable | not-accessible | mandatory | This group contains the provisionable parameters for the permanent logical channels (PLcns) on the X.25 interface (corresponding to Permanent Virtual Circuits … |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1 | RowmscX25DtePLcnProvEntry | not-accessible | mandatory | An entry in the mscX25DtePLcnProvTable. |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1.1 | ColumnmscX25DtePLcnEncAddressType | read-write | mandatory | This attribute specifies the encapsulation type for the address of the remote host with which this Peer component allows communication. |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1.2 | ColumnmscX25DtePLcnEncAddress | read-write | mandatory | This attribute specifies the encapsulation address of the remote host with which this PermLcn component defines a connection |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1.3 | ColumnmscX25DtePLcnProtocolEncType | read-write | mandatory | This attribute specifies the encapsulation method to use when exchanging protocol data units (PDUs) over this channel. IP and Null protocolEncTypes are as defi… |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1.4 | ColumnmscX25DtePLcnLinkToRemoteGroup | read-write | mandatory | This attribute specifies the link to the RemoteGroup, indicating the RemoteGroup component with which this PermLcn component is associated. The RemoteGroup com… |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1.5 | ColumnmscX25DtePLcnInPacketSize | read-write | mandatory | This attribute specifies the maximum receive packet size in octets. |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1.6 | ColumnmscX25DtePLcnOutPacketSize | read-write | mandatory | This attribute specifies the maximum transmit packet size in octets. |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1.7 | ColumnmscX25DtePLcnInWindowSize | read-write | mandatory | This attribute specifies the maximum receive window size. A inWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte compone… |
| 1.3.6.1.4.1.562.36.2.1.90.3.10.1.8 | ColumnmscX25DtePLcnOutWindowSize | read-write | mandatory | This attribute specifies the maximum transmit window size. A outWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte compo… |
| 1.3.6.1.4.1.562.36.2.1.90.4 | NodemscX25DteLcn | |||
| 1.3.6.1.4.1.562.36.2.1.90.4.1 | TablemscX25DteLcnRowStatusTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscX25DteLcn components. |
| 1.3.6.1.4.1.562.36.2.1.90.4.1.1 | RowmscX25DteLcnRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscX25DteLcn component. |
| 1.3.6.1.4.1.562.36.2.1.90.4.1.1.1 | ColumnmscX25DteLcnRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscX25DteLcn components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.90.4.1.1.2 | ColumnmscX25DteLcnComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.90.4.1.1.4 | ColumnmscX25DteLcnStorageType | read-only | mandatory | This variable represents the storage type value for the mscX25DteLcn tables. |
| 1.3.6.1.4.1.562.36.2.1.90.4.1.1.10 | ColumnmscX25DteLcnIndex | not-accessible | mandatory | This variable represents the index for the mscX25DteLcn tables. |
| 1.3.6.1.4.1.562.36.2.1.90.4.10 | TablemscX25DteLcnStateTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribut… |
| 1.3.6.1.4.1.562.36.2.1.90.4.10.1 | RowmscX25DteLcnStateEntry | not-accessible | mandatory | An entry in the mscX25DteLcnStateTable. |
| 1.3.6.1.4.1.562.36.2.1.90.4.10.1.1 | ColumnmscX25DteLcnAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.90.4.10.1.2 | ColumnmscX25DteLcnOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.90.4.10.1.3 | ColumnmscX25DteLcnUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.90.4.11 | TablemscX25DteLcnCpTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the call parameters that are in use for this logical channel. For a PVC only the packet size a… |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1 | RowmscX25DteLcnCpEntry | not-accessible | mandatory | An entry in the mscX25DteLcnCpTable. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.1 | ColumnmscX25DteLcnInPacketSize | read-only | mandatory | This attribute indicates the maximum receive packet size in octets. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.2 | ColumnmscX25DteLcnOutPacketSize | read-only | mandatory | This attribute indicates the maximum transmit packet size in octets. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.3 | ColumnmscX25DteLcnInWindowSize | read-only | mandatory | This attribute indicates the receive window size. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.4 | ColumnmscX25DteLcnOutWindowSize | read-only | mandatory | This attribute indicates the transmit window size. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.5 | ColumnmscX25DteLcnProposeReverseCharging | read-only | mandatory | Specifies whether local/reverse charging was negotiated for this logical channel. To determine which end of the channel is paying for the call, this attribute … |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.6 | ColumnmscX25DteLcnFastSelect | read-only | mandatory | This attribute indicates whether the fast select was used in establishing this logical channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.7 | ColumnmscX25DteLcnOutThroughputClassSize | read-only | mandatory | This attribute specifies the transmit throughput class. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.8 | ColumnmscX25DteLcnInThroughputClassSize | read-only | mandatory | This attribute specifies the receive throughput class. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.9 | ColumnmscX25DteLcnCugIndex | read-only | mandatory | This attribute indicates the index of the Closed User Group facility used in establishing this logical channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.10 | ColumnmscX25DteLcnCugoaIndex | read-only | mandatory | This attribute indicates the index of the Closed User Group with Outgoing Access facility used in establishing this logical channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.11 | ColumnmscX25DteLcnNetworkUserIdentifier | read-only | mandatory | Specifies the Network User Identifier used for this logical channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.12 | ColumnmscX25DteLcnChargingInformation | read-only | mandatory | This attribute indicates whether or not the charging information facility was used in establishing this logical channel. A value of notSpecified means the faci… |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.13 | ColumnmscX25DteLcnRpoa | read-only | mandatory | This attribute indicates the RPOA facility which was signalled in establishing this logical channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.14 | ColumnmscX25DteLcnTrnstDlySlctnAInd | read-only | mandatory | This attribute indicates the Transit Delay Selection and Indication value used for this logical channel. A value of 65536 means no facility was signalled. |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.23 | ColumnmscX25DteLcnCallingNetworkFax | read-only | mandatory | This attribute indicates the Calling Network facilities which were signalled in the call packet. A value of null (empty string) means no calling network facili… |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.24 | ColumnmscX25DteLcnCalledNetworkFax | read-only | mandatory | This attribute indicates the called network facilities which were signalled in the call packet. A value of null (empty string) means no called network faciliti… |
| 1.3.6.1.4.1.562.36.2.1.90.4.11.1.25 | ColumnmscX25DteLcnCallUserData | read-only | mandatory | This attribute indicates the user data which was signalled in the call packet. A value of null (empty string) means no user data was signalled. |
| 1.3.6.1.4.1.562.36.2.1.90.4.12 | TablemscX25DteLcnLcnStatusTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the status for an X.25 Logical Channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.12.1 | RowmscX25DteLcnLcnStatusEntry | not-accessible | mandatory | An entry in the mscX25DteLcnLcnStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.90.4.12.1.1 | ColumnmscX25DteLcnStatus | read-only | mandatory | This attribute indicates the current state of the logical channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.12.1.3 | ColumnmscX25DteLcnCallDirection | read-only | mandatory | This attribute indicates the direction of the call that caused the establishment of this channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.12.1.4 | ColumnmscX25DteLcnCalledAddress | read-only | mandatory | This attribute indicates the called X.25 address to which the call is established. |
| 1.3.6.1.4.1.562.36.2.1.90.4.12.1.5 | ColumnmscX25DteLcnCallingAddress | read-only | mandatory | This attribute indicates the calling X.25 address from which the call originated |
| 1.3.6.1.4.1.562.36.2.1.90.4.12.1.6 | ColumnmscX25DteLcnOriginalCalledAddress | read-only | mandatory | This attribute indicates the X.25 address of the originally called DTE to which the call was attempted. This could be different from the value of the calledAdd… |
| 1.3.6.1.4.1.562.36.2.1.90.4.13 | TablemscX25DteLcnStatsTable | not-accessible | mandatory | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics for an X.25 Logical Channel. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1 | RowmscX25DteLcnStatsEntry | not-accessible | mandatory | An entry in the mscX25DteLcnStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.1 | ColumnmscX25DteLcnInUknownProtocols | read-only | mandatory | This attribute counts the number packets received from link which were discareded because of an unkown or unsupported protocols. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.2 | ColumnmscX25DteLcnInDataOctets | read-only | mandatory | This attribute counts the number of octets of user data received from the link. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.3 | ColumnmscX25DteLcnInDataPackets | read-only | mandatory | This attribute counts the number of data packets received from the link. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.4 | ColumnmscX25DteLcnInRmtInitiatedRsts | read-only | mandatory | This attribute counts the number of reset packets, with a cause code of 'DTE initiated', which were received from the link |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.5 | ColumnmscX25DteLcnInPrvdrInitiatedRsts | read-only | mandatory | This attribute counts the number of reset packets, with a cause code other than 'DTE initiated', which were received from the link. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.6 | ColumnmscX25DteLcnInInterruptPackets | read-only | mandatory | This attribute counts the number of interrupt packets received from the link. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.7 | ColumnmscX25DteLcnOutDataOctets | read-only | mandatory | This attribute counts the number of octets of user data sent to the link. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.8 | ColumnmscX25DteLcnOutDataPackets | read-only | mandatory | This attribute counts the number of data packets sent to link. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.9 | ColumnmscX25DteLcnOutInterruptPackets | read-only | mandatory | This attribute counts the number of interrupt packets sent to link. |
| 1.3.6.1.4.1.562.36.2.1.90.4.13.1.10 | ColumnmscX25DteLcnT22ResetTimeouts | read-only | mandatory | This attribute counts the number of times the t22 reset timer has expired. |
| 1.3.6.1.4.1.562.36.2.1.90.5 | NodemscX25DteLapb | |||
| 1.3.6.1.4.1.562.36.2.1.90.5.1 | TablemscX25DteLapbRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscX25DteLapb components. |
| 1.3.6.1.4.1.562.36.2.1.90.5.1.1 | RowmscX25DteLapbRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscX25DteLapb component. |
| 1.3.6.1.4.1.562.36.2.1.90.5.1.1.1 | ColumnmscX25DteLapbRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscX25DteLapb components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.90.5.1.1.2 | ColumnmscX25DteLapbComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.90.5.1.1.4 | ColumnmscX25DteLapbStorageType | read-only | mandatory | This variable represents the storage type value for the mscX25DteLapb tables. |
| 1.3.6.1.4.1.562.36.2.1.90.5.1.1.10 | ColumnmscX25DteLapbIndex | not-accessible | mandatory | This variable represents the index for the mscX25DteLapb tables. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2 | NodemscX25DteLapbFramer | |||
| 1.3.6.1.4.1.562.36.2.1.90.5.2.1 | TablemscX25DteLapbFramerRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscX25DteLapbFramer components. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.1.1 | RowmscX25DteLapbFramerRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscX25DteLapbFramer component. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.1.1.1 | ColumnmscX25DteLapbFramerRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscX25DteLapbFramer components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.1.1.2 | ColumnmscX25DteLapbFramerComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.1.1.4 | ColumnmscX25DteLapbFramerStorageType | read-only | mandatory | This variable represents the storage type value for the mscX25DteLapbFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.1.1.10 | ColumnmscX25DteLapbFramerIndex | not-accessible | mandatory | This variable represents the index for the mscX25DteLapbFramer tables. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.10 | TablemscX25DteLapbFramerProvTable | not-accessible | mandatory | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other pro… |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.10.1 | RowmscX25DteLapbFramerProvEntry | not-accessible | mandatory | An entry in the mscX25DteLapbFramerProvTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.10.1.1 | ColumnmscX25DteLapbFramerInterfaceName | read-write | mandatory | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Fr… |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.11 | TablemscX25DteLapbFramerLinkTable | not-accessible | mandatory | This group contains attributes defining the framing of data on the link interface. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.11.1 | RowmscX25DteLapbFramerLinkEntry | not-accessible | mandatory | An entry in the mscX25DteLapbFramerLinkTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.11.1.4 | ColumnmscX25DteLapbFramerFlagsBetweenFrames | read-write | mandatory | This attribute defines the number of flags that are inserted between frames sent to the link interface. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.12 | TablemscX25DteLapbFramerStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.12.1 | RowmscX25DteLapbFramerStateEntry | not-accessible | mandatory | An entry in the mscX25DteLapbFramerStateTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.12.1.1 | ColumnmscX25DteLapbFramerAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.12.1.2 | ColumnmscX25DteLapbFramerOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.12.1.3 | ColumnmscX25DteLapbFramerUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13 | TablemscX25DteLapbFramerStatsTable | not-accessible | mandatory | This group contains the operational statistics data for a Framer component. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1 | RowmscX25DteLapbFramerStatsEntry | not-accessible | mandatory | An entry in the mscX25DteLapbFramerStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.1 | ColumnmscX25DteLapbFramerFrmToIf | read-only | obsolete | The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, … |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.2 | ColumnmscX25DteLapbFramerFrmFromIf | read-only | obsolete | The number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.3 | ColumnmscX25DteLapbFramerOctetFromIf | read-only | obsolete | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.4 | ColumnmscX25DteLapbFramerAborts | read-only | mandatory | This attribute is the total number of aborts received. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.5 | ColumnmscX25DteLapbFramerCrcErrors | read-only | mandatory | This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.6 | ColumnmscX25DteLapbFramerLrcErrors | read-only | mandatory | This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.7 | ColumnmscX25DteLapbFramerNonOctetErrors | read-only | mandatory | This attribute is the total number of frames that were non octet aligned. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.8 | ColumnmscX25DteLapbFramerOverruns | read-only | mandatory | This attribute is the total number of frames received from the link for which overruns occurred. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.9 | ColumnmscX25DteLapbFramerUnderruns | read-only | mandatory | This attribute is the total number of frames transmitted to the link for which underruns occurred. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.14 | ColumnmscX25DteLapbFramerFrmToIf64 | read-only | mandatory | The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, … |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.15 | ColumnmscX25DteLapbFramerFrmFromIf64 | read-only | mandatory | The number of frames received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.13.1.16 | ColumnmscX25DteLapbFramerOctetFromIf64 | read-only | mandatory | The number of bytes received from the link interface by Framer. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.14 | TablemscX25DteLapbFramerUtilTable | not-accessible | mandatory | This group contains the link utilizaiton operational data for a Framer component. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.14.1 | RowmscX25DteLapbFramerUtilEntry | not-accessible | mandatory | An entry in the mscX25DteLapbFramerUtilTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.14.1.1 | ColumnmscX25DteLapbFramerNormPrioLinkUtilToIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwi… |
| 1.3.6.1.4.1.562.36.2.1.90.5.2.14.1.3 | ColumnmscX25DteLapbFramerNormPrioLinkUtilFromIf | read-only | mandatory | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available … |
| 1.3.6.1.4.1.562.36.2.1.90.5.10 | TablemscX25DteLapbCpTable | not-accessible | mandatory | X25Dte/n Lapb This group contains the set of configuration parameters for the LAPB interface. |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1 | RowmscX25DteLapbCpEntry | not-accessible | mandatory | An entry in the mscX25DteLapbCpTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.1 | ColumnmscX25DteLapbStationType | read-write | mandatory | This attribute specifies the DCE or the DTE role of operation for the LAPB interface. Changing this attribute will cause the lapb link to Reset. |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.2 | ColumnmscX25DteLapbFrameSequencing | read-write | mandatory | This attribute specifies the modulo of the frame sequence numbering of the LAPB interface. Changing this attribute will cause the lapb link to Reset. |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.3 | ColumnmscX25DteLapbN1FrameSize | read-write | mandatory | |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.4 | ColumnmscX25DteLapbKWindowSize | read-write | mandatory | This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at an… |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.5 | ColumnmscX25DteLapbN2TransmitLimit | read-write | mandatory | This attribute specifies the maximum number of times a frame can be transmitted before appropriate recovery action is taken. |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.6 | ColumnmscX25DteLapbT1AckTimer | read-write | mandatory | This attribute specifies the period in milliseconds within which an acknowledgment of a sent frame must be received. The value set for t1 ack timer must be les… |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.7 | ColumnmscX25DteLapbT2AckDelayTimer | read-write | mandatory | This attribute specifies the maximum period in milliseconds permissible to wait before sending an acknowledgment for a received in sequenced I-frame. A value o… |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.8 | ColumnmscX25DteLapbT4IdleProbeTimer | read-write | mandatory | This attribute specifies the time period in milliseconds the link will be permitted to remain idle (that is, no frames are exchanged on the data link). Upon ex… |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.9 | ColumnmscX25DteLapbActionInitiate | read-write | mandatory | This attribute specifies the action to be taken by the LAPB interface to initiate link setup. |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.10 | ColumnmscX25DteLapbActionRecvDM | read-write | mandatory | This attribute specifies the action to be taken by the LAPB interface when it receives a DM response. |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.11 | ColumnmscX25DteLapbTxQDegradeThreshold | read-write | mandatory | This attribute specifies the threshold of the number of higher layer packets queued, beyond which LAPB should initiate a service degrade alarm. A value of 6553… |
| 1.3.6.1.4.1.562.36.2.1.90.5.10.1.12 | ColumnmscX25DteLapbTxQResetThreshold | read-write | mandatory | This attribute specifies the threshold of the number of higher layer packets queued, beyond which LAPB should initiate an overload alarm and reset the link. A … |
| 1.3.6.1.4.1.562.36.2.1.90.5.11 | TablemscX25DteLapbStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.90.5.11.1 | RowmscX25DteLapbStateEntry | not-accessible | mandatory | An entry in the mscX25DteLapbStateTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.11.1.1 | ColumnmscX25DteLapbAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.90.5.11.1.2 | ColumnmscX25DteLapbOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.90.5.11.1.3 | ColumnmscX25DteLapbUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.90.5.12 | TablemscX25DteLapbStatusTable | not-accessible | mandatory | This group contains the status for the LAPB interface. |
| 1.3.6.1.4.1.562.36.2.1.90.5.12.1 | RowmscX25DteLapbStatusEntry | not-accessible | mandatory | An entry in the mscX25DteLapbStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.12.1.1 | ColumnmscX25DteLapbCurrentState | read-only | mandatory | This attribute specifies the current state of the LAPB interface. |
| 1.3.6.1.4.1.562.36.2.1.90.5.12.1.2 | ColumnmscX25DteLapbLastStateChangeReason | read-only | mandatory | This attribute specifies the reason for the most recent state change. |
| 1.3.6.1.4.1.562.36.2.1.90.5.12.1.3 | ColumnmscX25DteLapbFrmrTransmit | read-only | mandatory | This attribute specifies the Information field of the FRMR most recently sent. |
| 1.3.6.1.4.1.562.36.2.1.90.5.12.1.4 | ColumnmscX25DteLapbFrmrReceive | read-only | mandatory | This attribute specifies the Information field of the FRMR most recently received. |
| 1.3.6.1.4.1.562.36.2.1.90.5.12.1.5 | ColumnmscX25DteLapbCurrentQueueSize | read-only | mandatory | This attribute specifies the number of packets on the lapb transmit queue. |
| 1.3.6.1.4.1.562.36.2.1.90.5.13 | TablemscX25DteLapbStatsTable | not-accessible | mandatory | This group contains the statistics for the LAPB interface. |
| 1.3.6.1.4.1.562.36.2.1.90.5.13.1 | RowmscX25DteLapbStatsEntry | not-accessible | mandatory | An entry in the mscX25DteLapbStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.90.5.13.1.1 | ColumnmscX25DteLapbStateChanges | read-only | mandatory | This attribute counts the number of times LAPB state has changed. Refer to the attribute 'linkState' for the set of possible states. |
| 1.3.6.1.4.1.562.36.2.1.90.5.13.1.2 | ColumnmscX25DteLapbRemoteBusy | read-only | mandatory | This attribute counts the number of times transmission of an I-frame was un-successful due to a perceived remote busy condition (window closed or remote busy). |
| 1.3.6.1.4.1.562.36.2.1.90.5.13.1.3 | ColumnmscX25DteLapbTransmitRejectFrames | read-only | mandatory | This attribute counts the number of REJ frames sent by the interface. |
| 1.3.6.1.4.1.562.36.2.1.90.5.13.1.4 | ColumnmscX25DteLapbReceiveRejectFrames | read-only | mandatory | This attribute counts the number of REJ frames received by the interface. |
| 1.3.6.1.4.1.562.36.2.1.90.5.13.1.5 | ColumnmscX25DteLapbT1AckTimeout | read-only | mandatory | This attribute counts the number of times the T1 timer has expired. |
| 1.3.6.1.4.1.562.36.2.1.90.6 | NodemscX25DtePle | |||
| 1.3.6.1.4.1.562.36.2.1.90.6.1 | TablemscX25DtePleRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscX25DtePle components. |
| 1.3.6.1.4.1.562.36.2.1.90.6.1.1 | RowmscX25DtePleRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscX25DtePle component. |
| 1.3.6.1.4.1.562.36.2.1.90.6.1.1.1 | ColumnmscX25DtePleRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscX25DtePle components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.90.6.1.1.2 | ColumnmscX25DtePleComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.90.6.1.1.4 | ColumnmscX25DtePleStorageType | read-only | mandatory | This variable represents the storage type value for the mscX25DtePle tables. |
| 1.3.6.1.4.1.562.36.2.1.90.6.1.1.10 | ColumnmscX25DtePleIndex | not-accessible | mandatory | This variable represents the index for the mscX25DtePle tables. |
| 1.3.6.1.4.1.562.36.2.1.90.6.10 | TablemscX25DtePleProvTable | not-accessible | mandatory | This group contains the provisionable attributes relevant to an interface used to carry Multiprotocol Interconnect traffic over X.25. |
| 1.3.6.1.4.1.562.36.2.1.90.6.10.1 | RowmscX25DtePleProvEntry | not-accessible | mandatory | An entry in the mscX25DtePleProvTable. |
| 1.3.6.1.4.1.562.36.2.1.90.6.10.1.1 | ColumnmscX25DtePleInactivityTimer | read-write | mandatory | This attribute specifies the period in milliseconds this interface will keep an idle connection open before closing it. |
| 1.3.6.1.4.1.562.36.2.1.90.6.11 | TablemscX25DtePleOpTable | not-accessible | mandatory | This group contains the Operational attributes relevant to an interface used to carry Multiprotocol Interconnect traffic over X.25. |
| 1.3.6.1.4.1.562.36.2.1.90.6.11.1 | RowmscX25DtePleOpEntry | not-accessible | mandatory | An entry in the mscX25DtePleOpTable. |
| 1.3.6.1.4.1.562.36.2.1.90.6.11.1.1 | ColumnmscX25DtePleEncAddrToX25LkupFlrs | read-only | mandatory | This attribute indicates the number of times a translation attempt from an Encapsulation address to an X.25 address failed to find a corresponding X.25 address… |
| 1.3.6.1.4.1.562.36.2.1.90.6.11.1.2 | ColumnmscX25DtePleLastFailedEncAddr | read-only | mandatory | This attribute indicates the last Encapsulation address for which no corresponding X.25 address was found and thus caused encAddressToX25LkupFlrs to be increme… |
| 1.3.6.1.4.1.562.36.2.1.90.6.11.1.4 | ColumnmscX25DtePleX25AddrToEncLkupFlrs | read-only | mandatory | This attribute indicates the number of times a translation attempt from an X.25 address to an Encapsulation address failed to find a corresponding Encapsulatio… |
| 1.3.6.1.4.1.562.36.2.1.90.6.11.1.5 | ColumnmscX25DtePleLastFailedX25Addr | read-only | mandatory | This field specifies the last X.25 address that caused x25AddressToEncLkupFlrs to be incremented. |
| 1.3.6.1.4.1.562.36.2.1.90.7 | NodemscX25DteRg | |||
| 1.3.6.1.4.1.562.36.2.1.90.7.1 | TablemscX25DteRgRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscX25DteRg components. |
| 1.3.6.1.4.1.562.36.2.1.90.7.1.1 | RowmscX25DteRgRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscX25DteRg component. |
| 1.3.6.1.4.1.562.36.2.1.90.7.1.1.1 | ColumnmscX25DteRgRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscX25DteRg components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.90.7.1.1.2 | ColumnmscX25DteRgComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.90.7.1.1.4 | ColumnmscX25DteRgStorageType | read-only | mandatory | This variable represents the storage type value for the mscX25DteRg tables. |
| 1.3.6.1.4.1.562.36.2.1.90.7.1.1.10 | ColumnmscX25DteRgIndex | not-accessible | mandatory | This variable represents the index for the mscX25DteRg tables. |
| 1.3.6.1.4.1.562.36.2.1.90.7.10 | TablemscX25DteRgIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.90.7.10.1 | RowmscX25DteRgIfEntryEntry | not-accessible | mandatory | An entry in the mscX25DteRgIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.10.1.1 | ColumnmscX25DteRgIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.90.7.10.1.2 | ColumnmscX25DteRgIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.90.7.11 | TablemscX25DteRgProvTable | not-accessible | mandatory | This group contains the provisionable attributes of the RemoteGroup component. |
| 1.3.6.1.4.1.562.36.2.1.90.7.11.1 | RowmscX25DteRgProvEntry | not-accessible | mandatory | An entry in the mscX25DteRgProvTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.11.1.1 | ColumnmscX25DteRgLinkToProtocolPort | read-write | mandatory | This attribute contains a protocol port component name. The attribute associates the application with a protocol port. |
| 1.3.6.1.4.1.562.36.2.1.90.7.11.1.2 | ColumnmscX25DteRgLocalAddress | read-write | mandatory | This attribute contains the unique X.25 address which identifies this RemoteGroup. It should correspond to the called address in X.25 incoming call packets whi… |
| 1.3.6.1.4.1.562.36.2.1.90.7.11.1.3 | ColumnmscX25DteRgMtuSize | read-write | mandatory | This attribute specifies the Maximum Transmit Unit (MTU); that is, the size of the largest datagram (in octets) which can be sent/ received on the interface. |
| 1.3.6.1.4.1.562.36.2.1.90.7.12 | TablemscX25DteRgStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.90.7.12.1 | RowmscX25DteRgStateEntry | not-accessible | mandatory | An entry in the mscX25DteRgStateTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.12.1.1 | ColumnmscX25DteRgAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.90.7.12.1.2 | ColumnmscX25DteRgOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.90.7.12.1.3 | ColumnmscX25DteRgUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.90.7.13 | TablemscX25DteRgOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.90.7.13.1 | RowmscX25DteRgOperStatusEntry | not-accessible | mandatory | An entry in the mscX25DteRgOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.13.1.1 | ColumnmscX25DteRgSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.90.7.210 | TablemscX25DteRgLTPlcnTable | not-accessible | mandatory | This attribute is a list of links to PermLcn components. The set of all Peer and PermLcn components which link to a given RemoteGroup determine the subset of r… |
| 1.3.6.1.4.1.562.36.2.1.90.7.210.1 | RowmscX25DteRgLTPlcnEntry | not-accessible | mandatory | An entry in the mscX25DteRgLTPlcnTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.210.1.1 | ColumnmscX25DteRgLTPlcnValue | read-write | mandatory | This variable represents both the value and the index for the mscX25DteRgLTPlcnTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.210.1.2 | ColumnmscX25DteRgLTPlcnRowStatus | write-only | mandatory | This variable is used to control the addition and deletion of individual values of the mscX25DteRgLTPlcnTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.211 | TablemscX25DteRgLtPeerTable | not-accessible | mandatory | This attribute gives a list of links to Peer components. The set of all Peer and PermLcn components which link to a given RemoteGroup determine the subset of r… |
| 1.3.6.1.4.1.562.36.2.1.90.7.211.1 | RowmscX25DteRgLtPeerEntry | not-accessible | mandatory | An entry in the mscX25DteRgLtPeerTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.211.1.1 | ColumnmscX25DteRgLtPeerValue | read-write | mandatory | This variable represents both the value and the index for the mscX25DteRgLtPeerTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.211.1.2 | ColumnmscX25DteRgLtPeerRowStatus | write-only | mandatory | This variable is used to control the addition and deletion of individual values of the mscX25DteRgLtPeerTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.212 | TablemscX25DteRgLcnTable | not-accessible | mandatory | This attribute lists the Lcn components for the X25Dte, which belong to this RemoteGroup. There is an Lcn component listed here for every lcn connection belong… |
| 1.3.6.1.4.1.562.36.2.1.90.7.212.1 | RowmscX25DteRgLcnEntry | not-accessible | mandatory | An entry in the mscX25DteRgLcnTable. |
| 1.3.6.1.4.1.562.36.2.1.90.7.212.1.1 | ColumnmscX25DteRgLcnValue | read-only | mandatory | This variable represents both the value and the index for the mscX25DteRgLcnTable. |
| 1.3.6.1.4.1.562.36.2.1.90.20 | TablemscX25DteCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.90.20.1 | RowmscX25DteCidDataEntry | not-accessible | mandatory | An entry in the mscX25DteCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.90.20.1.1 | ColumnmscX25DteCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.90.21 | TablemscX25DteIfTable | not-accessible | mandatory | This group provides the administrative set of parameters for the X.25 interface. |
| 1.3.6.1.4.1.562.36.2.1.90.21.1 | RowmscX25DteIfEntry | not-accessible | mandatory | An entry in the mscX25DteIfTable. |
| 1.3.6.1.4.1.562.36.2.1.90.21.1.1 | ColumnmscX25DteInterfaceMode | read-only | mandatory | This attribute specifies the packet mode in which the X.25 interface operates. When this attribute is set to dte, interface on the other side of the physical l… |
| 1.3.6.1.4.1.562.36.2.1.90.21.1.2 | ColumnmscX25DteMaxActiveChannels | read-write | mandatory | This attribute specifies the maximum number of channels that can be active on this interface including the Permanent Lcns and the Switched Lcns. In total maxAc… |
| 1.3.6.1.4.1.562.36.2.1.90.21.1.3 | ColumnmscX25DteNumberOfPLcn | read-write | mandatory | This attribute specifies the number of Permanent Logical Channels that are supported on this X.25 interface (that is, the number of PermLcn components that may… |
| 1.3.6.1.4.1.562.36.2.1.90.21.1.4 | ColumnmscX25DtePacketSequencing | read-write | mandatory | This attribute specifies the sequence numbering of packets for the X.25 interface. The value of this attribute must be the same as the packet sequencing config… |
| 1.3.6.1.4.1.562.36.2.1.90.21.1.5 | ColumnmscX25DteT20RestartTimer | read-write | mandatory | This attribute provides the period in milliseconds within which a restart request packet should be confirmed. |
| 1.3.6.1.4.1.562.36.2.1.90.21.1.6 | ColumnmscX25DteT21CallTimer | read-write | mandatory | This attribute provides the period in milliseconds within which a call request packet should be confirmed. |
| 1.3.6.1.4.1.562.36.2.1.90.21.1.7 | ColumnmscX25DteT22ResetTimer | read-write | mandatory | This attribute provides the period in milliseconds within which a reset request packet should be confirmed. |
| 1.3.6.1.4.1.562.36.2.1.90.21.1.8 | ColumnmscX25DteT23ClearTimer | read-write | mandatory | This attribute provides the period in milliseconds within which a clear request packet should be confirmed. |
| 1.3.6.1.4.1.562.36.2.1.90.22 | TablemscX25DteLcnCTable | not-accessible | mandatory | This group contains the provisionable attributes for the Logical Channel configuration of the X.25 Interface. The logical channel range table is ordered as fol… |
| 1.3.6.1.4.1.562.36.2.1.90.22.1 | RowmscX25DteLcnCEntry | not-accessible | mandatory | An entry in the mscX25DteLcnCTable. |
| 1.3.6.1.4.1.562.36.2.1.90.22.1.1 | ColumnmscX25DteLowestILChannelNumber | read-write | mandatory | This attribute specifies the lowest Lcn number of the One-way Incoming Channel range for this X.25 interface. The value for this attribute must be greater than… |
| 1.3.6.1.4.1.562.36.2.1.90.22.1.2 | ColumnmscX25DteHighestILChannelNumber | read-write | mandatory | This attribute specifies the highest Lcn number of the One-way Incoming Channel range for this X.25 interface. A value of 0 indicates that there are no channel… |
| 1.3.6.1.4.1.562.36.2.1.90.22.1.3 | ColumnmscX25DteLowestTLChannelNumber | read-write | mandatory | This attribute specifies the lowest Lcn number of the Two-way Channel range for this X.25 interface. The value for this attribute must be greater than the high… |
| 1.3.6.1.4.1.562.36.2.1.90.22.1.4 | ColumnmscX25DteHighestTLChannelNumber | read-write | mandatory | This attribute specifies the highest Lcn number of the Two-way Channel range for this X.25 interface. A value of 0 indicates that there are no channels in this… |
| 1.3.6.1.4.1.562.36.2.1.90.22.1.5 | ColumnmscX25DteLowestOLChannelNumber | read-write | mandatory | This attribute specifies the lowest Lcn number of the One-way Outgoing Channel range for this X.25 interface. The value for this attribute must be greater than… |
| 1.3.6.1.4.1.562.36.2.1.90.22.1.6 | ColumnmscX25DteHighestOLChannelNumber | read-write | mandatory | This attribute specifies the highest Lcn number of the One-way Outgoing Channel range for this X.25 interface. A value of 0 indicates that there are no channel… |
| 1.3.6.1.4.1.562.36.2.1.90.23 | TablemscX25DteDcpTable | not-accessible | mandatory | This group contains the provisionable attributes giving the default call parameters used by all the logical channels during call setup. It is possible that dif… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1 | RowmscX25DteDcpEntry | not-accessible | mandatory | An entry in the mscX25DteDcpTable. |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.1 | ColumnmscX25DteInPacketSize | read-write | mandatory | This attribute specifies the maximum receive packet size in octets for the X.25 interface. |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.2 | ColumnmscX25DteOutPacketSize | read-write | mandatory | This attribute specifies the maximum transmit packet size in octets for the X.25 interface. |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.3 | ColumnmscX25DteInWindowSize | read-write | mandatory | This attribute specifies the maximum receive window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing attribute… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.4 | ColumnmscX25DteOutWindowSize | read-write | mandatory | This attribute specifies the maximum transmit window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing is set t… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.5 | ColumnmscX25DteAcceptReverseCharging | read-write | mandatory | This attribute specifies whether local end will accept or refuse charges for a call. A value of neverAccept is only used at the X.25 interface level and indica… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.6 | ColumnmscX25DteProposeReverseCharging | read-write | mandatory | This attribute specifies whether local/reverse charging is signalled in the call request packet. |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.8 | ColumnmscX25DteOutThroughputClassSize | read-write | mandatory | This attribute specifies the value of the transmit throughput class to be negotiated. A value of notSpecified means the facility is not signalled. |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.9 | ColumnmscX25DteInThroughputClassSize | read-write | mandatory | This attribute specifies the value of the receive throughput class to be negotiated. A value of notSpecified means the facility is not signalled. |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.10 | ColumnmscX25DteCugIndex | read-write | mandatory | This attribute specifies the index of the Closed User Group facility to signal. The index consists of two or four octets each representing a digit in the range… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.11 | ColumnmscX25DteCugoaIndex | read-write | mandatory | This attribute specifies the index of the Close User Group with Outgoing Access facility to signal. The index consists of two or four octets each representing … |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.13 | ColumnmscX25DteChargingInformation | read-write | mandatory | This attribute specifies whether the charging information facility is to be signalled in a call request packet. A value of notSpecified means the facility is n… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.14 | ColumnmscX25DteRpoa | read-write | mandatory | This attribute specifies the value of the RPOA facility to signal in a call request packet. The value of null (empty string) at the X.25 interface means no RPO… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.15 | ColumnmscX25DteTrnstDlySlctnAInd | read-write | mandatory | This attribute specifies the value of the Transit Delay Selection and Indication facility to signal in a call request packet. A value of 65536 at the X.25 inte… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.24 | ColumnmscX25DteCallingNetworkFax | read-write | mandatory | This attribute specifies the Calling Network facilities to be signalled in a call request packet. A value of null (empty string) at the X.25 interface means no… |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.25 | ColumnmscX25DteCalledNetworkFax | read-write | mandatory | This attribute specifies the called network facilities to be signalled in a call request packet. A value of null (empty string) at the X.25 interface means no … |
| 1.3.6.1.4.1.562.36.2.1.90.23.1.26 | ColumnmscX25DteCallUserData | read-only | mandatory | This attribute specifies the user data to be signalled in the call request packet. A value of null (empty string) means no user data is signalled. |
| 1.3.6.1.4.1.562.36.2.1.90.24 | TablemscX25DteIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.90.24.1 | RowmscX25DteIfEntryEntry | not-accessible | mandatory | An entry in the mscX25DteIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.90.24.1.1 | ColumnmscX25DteIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.90.24.1.2 | ColumnmscX25DteIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.90.25 | TablemscX25DteStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.90.25.1 | RowmscX25DteStateEntry | not-accessible | mandatory | An entry in the mscX25DteStateTable. |
| 1.3.6.1.4.1.562.36.2.1.90.25.1.1 | ColumnmscX25DteAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.90.25.1.2 | ColumnmscX25DteOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.90.25.1.3 | ColumnmscX25DteUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.90.26 | TablemscX25DteOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.90.26.1 | RowmscX25DteOperStatusEntry | not-accessible | mandatory | An entry in the mscX25DteOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.90.26.1.1 | ColumnmscX25DteSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.90.27 | TablemscX25DteOpTable | not-accessible | mandatory | This group contains the operational status of the X.25 interface. |
| 1.3.6.1.4.1.562.36.2.1.90.27.1 | RowmscX25DteOpEntry | not-accessible | mandatory | An entry in the mscX25DteOpTable. |
| 1.3.6.1.4.1.562.36.2.1.90.27.1.1 | ColumnmscX25DteInterfaceState | read-only | mandatory | This attribute specifies the state of the interface. The notReady state, is the initial state of the service, when it is being initialized. The localRestarting… |
| 1.3.6.1.4.1.562.36.2.1.90.28 | TablemscX25DteStatsTable | not-accessible | mandatory | This component contains the statistics for the X.25 interface. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1 | RowmscX25DteStatsEntry | not-accessible | mandatory | An entry in the mscX25DteStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.1 | ColumnmscX25DteInCalls | read-only | mandatory | This attribute counts the number of call packets received from link. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.2 | ColumnmscX25DteInCallRefusals | read-only | mandatory | This attribute counts the number of calls received from the link which have been cleared. This includes calls cleared by the X.25 interface and calls cleared b… |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.3 | ColumnmscX25DteInPrvdrInitiatedClrs | read-only | mandatory | This attribute counts the number of clear packets received from the link with a cause code other than DTE initiated. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.4 | ColumnmscX25DteInRmtInitiatedRsts | read-only | mandatory | This attribute counts the number of reset packets received from the link with the cause code DTE initiated. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.5 | ColumnmscX25DteInPrvdrInitiatedRsts | read-only | mandatory | This attribute counts the number of reset packets received from the link with the cause code other than DTE initiated. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.6 | ColumnmscX25DteInRestarts | read-only | mandatory | This attribute counts the number of restart packets received from the link while the service is in ready state. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.7 | ColumnmscX25DteInDataPackets | read-only | mandatory | This attribute counts the number of data packets received from link. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.8 | ColumnmscX25DteInPktsAcusdOfPrtclErr | read-only | mandatory | This attribute counts the number of clear, reset, restart and diagnostic packets received from link containing a procedure error cause code. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.9 | ColumnmscX25DteInInterruptPackets | read-only | mandatory | This attributes counts the number of interrupt packets received from link. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.10 | ColumnmscX25DteOutCallAttempts | read-only | mandatory | This attribute counts the number of call packets sent from this interface. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.11 | ColumnmscX25DteOutCallFailures | read-only | mandatory | This attribute counts the number of call attempts from this interface that failed. This includes calls that were cleared because of restrictive fast select. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.12 | ColumnmscX25DteOutInterruptPackets | read-only | mandatory | This attribute counts the number of interrupt packets sent to the link. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.13 | ColumnmscX25DteOutDataPackets | read-only | mandatory | This attribute counts the number of data packets sent to the link. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.14 | ColumnmscX25DteOutActiveChannels | read-only | mandatory | This attribute indicates the number of One-way Outgoing Channels that are currently in use. This counter includes the call requests that have not been accepted. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.15 | ColumnmscX25DteInActiveChannels | read-only | mandatory | This attribute indicates number of One-way Incoming Channels that are currently active. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.16 | ColumnmscX25DteTwowayActiveChannels | read-only | mandatory | This attribute indicates the number of Two-way Channels that are in use. This includes call requests sent but not yet accepted. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.17 | ColumnmscX25DteT20RestartTimeouts | read-only | mandatory | This attribute counts the number of times the T20 restart timer has expired. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.18 | ColumnmscX25DteT21CallTimeouts | read-only | mandatory | This attribute counts the number of times the T21 call timer has expired. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.19 | ColumnmscX25DteT22ResetTimeouts | read-only | mandatory | This attribute counts the number of times the T22 reset timer has expired. |
| 1.3.6.1.4.1.562.36.2.1.90.28.1.20 | ColumnmscX25DteT23ClearTimeouts | read-only | mandatory | This attribute counts the number of times the T23 clear timer has expired. |
| 1.3.6.1.4.1.562.36.2.2.48 | Nodex25DteMIB | |||
| 1.3.6.1.4.1.562.36.2.2.48.1 | Nodex25DteGroup | |||
| 1.3.6.1.4.1.562.36.2.2.48.1.1 | Nodex25DteGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.48.1.1.3 | Nodex25DteGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.48.1.1.3.2 | Nodex25DteGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.48.3 | Nodex25DteCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.48.3.1 | Nodex25DteCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.48.3.1.3 | Nodex25DteCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.48.3.1.3.2 | Nodex25DteCapabilitiesCA02A |