Novell-LANalyzer-TR-MIB
180 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | DisplayString |
| RFC1271-MIB | EntryStatus OwnerString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23 | Nodenovell | |||
| 1.3.6.1.4.1.23.1 | NodeproductType | |||
| 1.3.6.1.4.1.23.2 | NodemibDoc | |||
| 1.3.6.1.4.1.23.2.15 | Noderingrmon-mib | |||
| 1.3.6.1.4.1.23.2.15.1 | NodetokenRingStatistics | |||
| 1.3.6.1.4.1.23.2.15.1.1 | TabletokenRingStatsTable | not-accessible | mandatory | A list of token ring statistics entries. |
| 1.3.6.1.4.1.23.2.15.1.1.1 | RowtokenRingStatsEntry | not-accessible | mandatory | A collection of statistics kept for a particular token ring interface. |
| 1.3.6.1.4.1.23.2.15.1.1.1.1 | ColumntokenRingStatsIndex | read-only | mandatory | The value of this object uniquely identifies this tokenRingStat entry. |
| 1.3.6.1.4.1.23.2.15.1.1.1.2 | ColumntokenRingStatsDataSource | read-write | mandatory | This object contains the identifier for the source of the data that this tokenRingStats entry is set up to analyze. The identifier is defined to contain the na… |
| 1.3.6.1.4.1.23.2.15.1.1.1.3 | ColumntokenRingStatsDropEvents | read-only | mandatory | The total number of events in which packets are dropped by the probe due to lack of resources. Note that this is not necessarily the number of packets dropped,… |
| 1.3.6.1.4.1.23.2.15.1.1.1.4 | ColumntokenRingStatsDataOctets | read-only | mandatory | The total number of good NON-MAC octets received on the network, excluding framing bits but including FCS octets. In contrast to etherStatsOctets, octets from … |
| 1.3.6.1.4.1.23.2.15.1.1.1.5 | ColumntokenRingStatsDataPkts | read-only | mandatory | The total number of good NON-MAC packets received on the network. In contrast to etherStatsPkts, bad packets are not counted. |
| 1.3.6.1.4.1.23.2.15.1.1.1.6 | ColumntokenRingStatsBroadcastDataPkts | read-only | mandatory | The total number of good NON-MAC packets received that were direct to the broadcast address. Note that bad broadcast packets are not counted. |
| 1.3.6.1.4.1.23.2.15.1.1.1.7 | ColumntokenRingStatsMulticastDataPkts | read-only | mandatory | The total number of good NON-MAC packets received that were directed to a local or global multicast or functional address. Note that bad mutlicast packets are … |
| 1.3.6.1.4.1.23.2.15.1.1.1.8 | ColumntokenRingStatsMACOctets | read-only | mandatory | The total number of good MAC octets received on the network, excluding framing bits but including FCS octets. Same as tokenRingStatsDataOctets, octets from bad… |
| 1.3.6.1.4.1.23.2.15.1.1.1.9 | ColumntokenRingStatsMACPkts | read-only | mandatory | The total number of good MAC packets received on the network, including unicast, multicast and broadcast MAC packets. Same as tokenRingStatsDataPkts, bad MAC p… |
| 1.3.6.1.4.1.23.2.15.1.1.1.10 | ColumntokenRingStatsRingPurges | read-only | mandatory | The total number of times that the ring enters the ring purge state from normal ring state. Ring purge occurs when the active monitor station detects a type 2 … |
| 1.3.6.1.4.1.23.2.15.1.1.1.11 | ColumntokenRingStatsMonitorContentions | read-only | mandatory | The total number of times that the ring enters the monitor contention state from normal ring state or ring purge state. Monitor contention occurs when a type 3… |
| 1.3.6.1.4.1.23.2.15.1.1.1.12 | ColumntokenRingStatsBeacons | read-only | mandatory | The total number of times that the ring enters the beaconing state. Beaconing occurs when a type 4 soft error or hard error occurs in the network. |
| 1.3.6.1.4.1.23.2.15.1.1.1.13 | ColumntokenRingStatsLostMonitors | read-only | mandatory | The total number of monitor errors reported by the Report Monitor Error MAC frame. It occurs when the standby monitor fails to detect a good token in 2.6 secon… |
| 1.3.6.1.4.1.23.2.15.1.1.1.14 | ColumntokenRingStatsDuplicateMonitors | read-only | mandatory | The total number of duplicate monitor errors reported by the Report Monitor Error MAC frame. When an active monitor detects a ring purge frame or an active mon… |
| 1.3.6.1.4.1.23.2.15.1.1.1.15 | ColumntokenRingStatsDuplicateAddresses | read-only | mandatory | The total number of duplicate address errors reported by the Report Monitor Error MAC frame. It is generated by the station when it detects other stations usin… |
| 1.3.6.1.4.1.23.2.15.1.1.1.16 | ColumntokenRingStatsRingPollFailures | read-only | mandatory | The total number of Report Ring Poll Failure MAC frames received. It is generated when the active monitor cannot see a ring poll cycle completed within a time … |
| 1.3.6.1.4.1.23.2.15.1.1.1.17 | ColumntokenRingStatsLineErrors | read-only | mandatory | The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated er… |
| 1.3.6.1.4.1.23.2.15.1.1.1.18 | ColumntokenRingStatsInternalErrors | read-only | mandatory | The total number of adapter internal errors reported to the Ring Error Monitor. Internal error indicates that a station recognizes a recoverable internal error… |
| 1.3.6.1.4.1.23.2.15.1.1.1.19 | ColumntokenRingStatsBurstErrors | read-only | mandatory | The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit … |
| 1.3.6.1.4.1.23.2.15.1.1.1.20 | ColumntokenRingStatsACErrors | read-only | mandatory | The total number of AC errors reported to the Ring Error Monitor. AC error indicates that a station cannot interpret the address recognition bit or the frame c… |
| 1.3.6.1.4.1.23.2.15.1.1.1.21 | ColumntokenRingStatsAbortDelimiters | read-only | mandatory | The total number of abort delimiters reported to the Ring Error Monitor. Abort delimiter indicates that a station aborts a transmission. Abort delimiter is iso… |
| 1.3.6.1.4.1.23.2.15.1.1.1.22 | ColumntokenRingStatsLostFrameErrors | read-only | mandatory | The total number of lost frame errors reported to the Ring Error Monitor. Lost frame error indicates that the end delimiter of a frame is lost in the network. … |
| 1.3.6.1.4.1.23.2.15.1.1.1.23 | ColumntokenRingStatsReceiveCongestions | read-only | mandatory | The total number of receive congestion errors reported to the Ring Error Monitor. Receive congestion error indicates that a station recognizes a frame addresse… |
| 1.3.6.1.4.1.23.2.15.1.1.1.24 | ColumntokenRingStatsFrameCopiedErrors | read-only | mandatory | The total number of frame copied errors reported to the Ring Error Monitor. Frame copied error indicates that a station recognizes a frame addressed to its spe… |
| 1.3.6.1.4.1.23.2.15.1.1.1.25 | ColumntokenRingStatsFrequencyErrors | read-only | mandatory | The total number of frequency errors reported to the Ring Error Monitor. Frequency error indicates that a station detects that the frequency of the incoming si… |
| 1.3.6.1.4.1.23.2.15.1.1.1.26 | ColumntokenRingStatsTokenErrors | read-only | mandatory | The total number of token errors reported to the Ring Error Monitor. Token error indicates that the Active Monitor station recognizes an error condition that n… |
| 1.3.6.1.4.1.23.2.15.1.1.1.27 | ColumntokenRingStatsDataPktsUndersizePkts | read-only | mandatory | The total number of packets received that were between 0 and 17 octets in length inclusive, excluding framing bits but including FCS octets. Packets in this ca… |
| 1.3.6.1.4.1.23.2.15.1.1.1.28 | ColumntokenRingStatsDataPkts18to63Octets | read-only | mandatory | The total number of data packets received that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets. It is the co… |
| 1.3.6.1.4.1.23.2.15.1.1.1.29 | ColumntokenRingStatsDataPkts64to127Octets | read-only | mandatory | The total number of data packets received that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets. It is the c… |
| 1.3.6.1.4.1.23.2.15.1.1.1.30 | ColumntokenRingStatsDataPkts128to255Octets | read-only | mandatory | The total number of data packets received that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets. It is the … |
| 1.3.6.1.4.1.23.2.15.1.1.1.31 | ColumntokenRingStatsDataPkts256to511Octets | read-only | mandatory | The total number of data packets received that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets. It is the … |
| 1.3.6.1.4.1.23.2.15.1.1.1.32 | ColumntokenRingStatsDataPkts512to1023Octets | read-only | mandatory | The total number of data packets received that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets. It is the… |
| 1.3.6.1.4.1.23.2.15.1.1.1.33 | ColumntokenRingStatsDataPkts1024to2047Octets | read-only | mandatory | The total number of data packets received that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets. It is th… |
| 1.3.6.1.4.1.23.2.15.1.1.1.34 | ColumntokenRingStatsDataPkts2048to4608Octets | read-only | mandatory | The total number of data packets (excluding error packets) received that were between 2048 and 4608 octets in length inclusive, excluding framing bits but incl… |
| 1.3.6.1.4.1.23.2.15.1.1.1.35 | ColumntokenRingStatsDataPkts4609to18000Octets | read-only | mandatory | The total number of data packets (excluding error packets) received that were between 4609 and 18000 octets in length inclusive, excluding framing bits but inc… |
| 1.3.6.1.4.1.23.2.15.1.1.1.36 | ColumntokenRingStatsDataPktsMoreThan18000Octets | read-only | mandatory | The total number of data packets (excluding error packets) received that were more than 18000 in length, excluding framing bits but including FCS octets. Note … |
| 1.3.6.1.4.1.23.2.15.1.1.1.37 | ColumntokenRingStatsOwner | read-write | mandatory | An administratively assigned name for the management station that configured this entry and is therefore using the resources assigned to it. This object contai… |
| 1.3.6.1.4.1.23.2.15.1.1.1.38 | ColumntokenRingStatsStatus | read-write | mandatory | The status of this tokenRingStats entry. |
| 1.3.6.1.4.1.23.2.15.2 | NodetokenRingHistory | |||
| 1.3.6.1.4.1.23.2.15.2.1 | TabletokenRingHistoryTable | not-accessible | mandatory | A list of token ring statistics entries. |
| 1.3.6.1.4.1.23.2.15.2.1.1 | RowtokenRingHistoryEntry | not-accessible | mandatory | A collection of history statistics kept for a particular token ring interface. |
| 1.3.6.1.4.1.23.2.15.2.1.1.1 | ColumntokenRingHistoryIndex | read-only | mandatory | The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of hi… |
| 1.3.6.1.4.1.23.2.15.2.1.1.2 | ColumntokenRingHistoryStartIndex | read-only | mandatory | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts… |
| 1.3.6.1.4.1.23.2.15.2.1.1.3 | ColumntokenRingHistoryIntervalStart | read-only | mandatory | The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first… |
| 1.3.6.1.4.1.23.2.15.2.1.1.4 | ColumntokenRingHistoryDropEvents | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.5 | ColumntokenRingHistoryDataOctets | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.6 | ColumntokenRingHistoryDataPkts | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.7 | ColumntokenRingHistoryBroadcastDataPkts | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.8 | ColumntokenRingHistoryMulticastDataPkts | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.9 | ColumntokenRingHistoryMACOctets | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.10 | ColumntokenRingHistoryMACPkts | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.11 | ColumntokenRingHistoryRingPurges | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.12 | ColumntokenRingHistoryMonitorContentions | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.13 | ColumntokenRingHistoryBeacons | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.14 | ColumntokenRingHistoryLostMonitors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.15 | ColumntokenRingHistoryDuplicateMonitors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.16 | ColumntokenRingHistoryDuplicateAddresses | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.17 | ColumntokenRingHistoryRingPollFailures | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.18 | ColumntokenRingHistoryLineErrors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.19 | ColumntokenRingHistoryInternalErrors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.20 | ColumntokenRingHistoryBurstErrors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.21 | ColumntokenRingHistoryACErrors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.22 | ColumntokenRingHistoryAbortDelimiters | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.23 | ColumntokenRingHistoryLostFrameErrors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.24 | ColumntokenRingHistoryReceiveCongestions | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.25 | ColumntokenRingHistoryFrameCopiedErrors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.26 | ColumntokenRingHistoryFrequencyErrors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.27 | ColumntokenRingHistoryTokenErrors | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.2.1.1.28 | ColumntokenRingHistoryUtilization | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.3 | NodetokenRing | |||
| 1.3.6.1.4.1.23.2.15.3.1 | TabletokenRingControlTable | not-accessible | mandatory | A list of token ring configuration control entries. |
| 1.3.6.1.4.1.23.2.15.3.1.1 | RowtokenRingControlEntry | not-accessible | mandatory | A list of parameters that sets up a command buffer and two event pointers for the manager who has created this instance. |
| 1.3.6.1.4.1.23.2.15.3.1.1.1 | ColumntokenRingControlIndex | read-only | mandatory | An index that uniquely identifies an entry in the tokenRingControl table. Each entry contains a command buffer for the management station to issue a command an… |
| 1.3.6.1.4.1.23.2.15.3.1.1.2 | ColumntokenRingControlIfIndex | read-write | mandatory | This object contains the board interface number which is identical to the ifIndex object in the interface table of MIB-I or MIB-II. |
| 1.3.6.1.4.1.23.2.15.3.1.1.3 | ColumntokenRingControlCommandStatus | read-write | mandatory | The object contains the result of the most recent test, or the value none(1) if no tests have been requested since last reset. After the manager issues a new c… |
| 1.3.6.1.4.1.23.2.15.3.1.1.4 | ColumntokenRingControlCommandType | read-write | mandatory | The object specifies the operation to act upon the target station requested by the manager. The agent only accepts unicast address from the management station.… |
| 1.3.6.1.4.1.23.2.15.3.1.1.5 | ColumntokenRingControlCommandTargetAddress | read-write | mandatory | This object contains the MAC address of the target station requested by the manager. The value must be an unicast address. Multicast, functional or broadcast a… |
| 1.3.6.1.4.1.23.2.15.3.1.1.6 | ColumntokenRingControlBeaconEventIndex | read-write | mandatory | The value of this object identifies the event that is configured to be generated when the ring to which this interface board is connected starts beaconing. The… |
| 1.3.6.1.4.1.23.2.15.3.1.1.7 | ColumntokenRingControlConfigEventIndex | read-write | mandatory | The value of this object identifies the event that is configured to be generated when a station has entered or exited the ring that this interface board is con… |
| 1.3.6.1.4.1.23.2.15.3.1.1.8 | ColumntokenRingControlOwner | read-write | mandatory | An administratively assigned name for the management station that configured this entry and is therefore using the resources assigned to it. In some cases the … |
| 1.3.6.1.4.1.23.2.15.3.1.1.9 | ColumntokenRingControlStatus | read-write | mandatory | The status of this entry. |
| 1.3.6.1.4.1.23.2.15.3.2 | TabletokenRingNetworkTable | not-accessible | mandatory | The ring level information about the token ring networks in this machine. |
| 1.3.6.1.4.1.23.2.15.3.2.1 | RowtokenRingNetworkEntry | not-accessible | mandatory | The current state of this token ring network. |
| 1.3.6.1.4.1.23.2.15.3.2.1.1 | ColumntokenRingNetworkIfIndex | read-only | mandatory | This object contains the board interface number which is identical to the ifIndex object in the interface table of MIB-I or MIB-II. |
| 1.3.6.1.4.1.23.2.15.3.2.1.2 | ColumntokenRingNetworkLastResetTime | read-only | mandatory | This object contains the sysUpTime when the data base of this group is created or last reset. |
| 1.3.6.1.4.1.23.2.15.3.2.1.3 | ColumntokenRingNetworkRingNumber | read-only | mandatory | The ring number of which this interface board connects to. If the ring number is not known, it should be set to zero. |
| 1.3.6.1.4.1.23.2.15.3.2.1.4 | ColumntokenRingNetworkMediaSpeed | read-only | mandatory | The media speed of the ring. The value is either 4 or 16. Other values are not allowed. |
| 1.3.6.1.4.1.23.2.15.3.2.1.5 | ColumntokenRingNetworkBridges | read-only | mandatory | The number of bridges in the host table. The bridge is referred to the device which supports the bridge functional address. |
| 1.3.6.1.4.1.23.2.15.3.2.1.6 | ColumntokenRingNetworkActiveStations | read-only | mandatory | The number of active stations in the host table. The active stations are participating in the ring poll process. |
| 1.3.6.1.4.1.23.2.15.3.2.1.7 | ColumntokenRingNetworkInactiveStations | read-only | mandatory | The number of inactive stations in the host table. The inactive stations are not inserted in the ring or are not participating in the ring poll process. Note t… |
| 1.3.6.1.4.1.23.2.15.3.2.1.8 | ColumntokenRingNetworkLastEnterMACAddress | read-only | mandatory | The MAC address of the token ring station that has entered this ring most recently. |
| 1.3.6.1.4.1.23.2.15.3.2.1.9 | ColumntokenRingNetworkLastExitMACAddress | read-only | mandatory | The MAC address of the token ring station that has left this ring most recently. |
| 1.3.6.1.4.1.23.2.15.3.2.1.10 | ColumntokenRingNetworkState | read-only | mandatory | The state of the ring of which this entry is a part. |
| 1.3.6.1.4.1.23.2.15.3.2.1.11 | ColumntokenRingNetworkStateCause | read-only | mandatory | The cause of this state transition. It is required to give the best estimation of the cause. When this interface just enters the ring, this object is initializ… |
| 1.3.6.1.4.1.23.2.15.3.2.1.12 | ColumntokenRingNetworkStateSenderMACAddress | read-only | mandatory | The MAC address of the station which initiates the state transition. |
| 1.3.6.1.4.1.23.2.15.3.2.1.13 | ColumntokenRingNetworkStateUpstreamNeighborMACAddress | read-only | mandatory | The MAC address in the upstream neighbor address subvector of the MAC protocol frame. Some MAC protocol frames, such as ring purge frame, do not contain that s… |
| 1.3.6.1.4.1.23.2.15.3.2.1.14 | ColumntokenRingNetworkHostOrderChanges | read-only | mandatory | The count of the index in the host table that has changed since this table is created. The host table contains active and inactive stations which are arranged … |
| 1.3.6.1.4.1.23.2.15.3.2.1.15 | ColumntokenRingNetworkActiveMonitorChanges | read-only | mandatory | The number of times that the active monitor changes station since this table is created. |
| 1.3.6.1.4.1.23.2.15.3.3 | TabletokenRingHostTable | not-accessible | mandatory | A list of token ring host table entries. |
| 1.3.6.1.4.1.23.2.15.3.3.1 | RowtokenRingHostEntry | not-accessible | mandatory | The information of the host that has been discovered on this interface. |
| 1.3.6.1.4.1.23.2.15.3.3.1.1 | ColumntokenRingHostIfIndex | read-only | mandatory | This object contains the board interface number which is identical to the ifIndex object in the interface table of MIB-I or MIB-II. |
| 1.3.6.1.4.1.23.2.15.3.3.1.2 | ColumntokenRingHostIndex | read-only | mandatory | An index that defines the relative order of the hosts in this ring starting from the Active Monitor station. The active monitor station contains the value of 1… |
| 1.3.6.1.4.1.23.2.15.3.3.1.3 | ColumntokenRingHostStatus | read-only | mandatory | The host table contains active and inactive stations. An active station is currently participating in the ring poll process. An inactive station is vice versa.… |
| 1.3.6.1.4.1.23.2.15.3.3.1.4 | ColumntokenRingHostLastEnterTime | read-only | mandatory | The sysUpTime that the station has entered the ring most recently or when the host entry is created. |
| 1.3.6.1.4.1.23.2.15.3.3.1.5 | ColumntokenRingHostLastExitTime | read-only | mandatory | The sysUpTime that the station has exited the ring most recently. When this object is created, it shall reset its value to 0. It indicates that the station has… |
| 1.3.6.1.4.1.23.2.15.3.3.1.6 | ColumntokenRingHostMACAddress | read-only | mandatory | The station's MAC address to which this entry is belonged. |
| 1.3.6.1.4.1.23.2.15.3.3.1.7 | ColumntokenRingHostPhysicalDropNumber | read-only | mandatory | The station's physical drop number of which this entry is belonged. If the value of this object is not assigned, then it is defaulted to four zeros. |
| 1.3.6.1.4.1.23.2.15.3.3.1.8 | ColumntokenRingHostSoftErrorReportTimerValue | read-only | mandatory | The time interval of the host station that the Report Soft Error MAC frame is generated. The default value is two seconds. The value is in units of millisecond. |
| 1.3.6.1.4.1.23.2.15.3.3.1.9 | ColumntokenRingHostGroupAddresses | read-only | mandatory | The group address of this station. |
| 1.3.6.1.4.1.23.2.15.3.3.1.10 | ColumntokenRingHostFunctionalAddresses | read-only | mandatory | The functional address of the station. The functional address is assigned in the bit map fashion. The first two bytes are always 'C0-00' in hex. and the first … |
| 1.3.6.1.4.1.23.2.15.3.3.1.11 | ColumntokenRingHostAuthorizedFunctionClass | read-only | mandatory | Source classes for which the host is enabled to transmit. Valid range is '0000 0000 0000 0000'b to '1111 1111 1111 1111'b. Each bit 0 to 15 corresponds to func… |
| 1.3.6.1.4.1.23.2.15.3.3.1.12 | ColumntokenRingHostAuthorizedAccessPriority | read-only | mandatory | Maximum allowed token priority with which the attached product is allowed to transmit. |
| 1.3.6.1.4.1.23.2.15.3.3.1.13 | ColumntokenRingHostAdapterSoftwareLevel | read-only | mandatory | The adapter software level of this station. The interpretation of the value in this object is vendor specific. |
| 1.3.6.1.4.1.23.2.15.3.3.1.14 | ColumntokenRingHostAdapterStatusVector | read-only | mandatory | The adapter status vector of this station. The interpretation of the value in this object is vendor specific. |
| 1.3.6.1.4.1.23.2.15.3.3.1.15 | ColumntokenRingHostProductID | read-only | mandatory | The product identification of this station. The content is defined by vendor. |
| 1.3.6.1.4.1.23.2.15.3.3.1.16 | ColumntokenRingHostLostMonitors | read-only | mandatory | The total number of monitor errors reported by the Report Monitor Error MAC frame. It occurs when the standby monitor fails to detect a good token in 2.6 secon… |
| 1.3.6.1.4.1.23.2.15.3.3.1.17 | ColumntokenRingHostDuplicateMonitors | read-only | mandatory | The total number of duplicate monitor errors reported by the Report Monitor Error MAC frame. When an active monitor detects a ring purge frame or an active mon… |
| 1.3.6.1.4.1.23.2.15.3.3.1.18 | ColumntokenRingHostDuplicateAddresses | read-only | mandatory | The total number of duplicate address errors reported by the Report Monitor Error MAC frame. It is generated by the station when it detects other stations usin… |
| 1.3.6.1.4.1.23.2.15.3.3.1.19 | ColumntokenRingHostRingPollFailures | read-only | mandatory | The total number of Report Ring Poll Failure MAC frames received. It is generated when the active monitor cannot see a ring poll cycle completed within a time … |
| 1.3.6.1.4.1.23.2.15.3.3.1.20 | ColumntokenRingHostInLineErrors | read-only | mandatory | The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated er… |
| 1.3.6.1.4.1.23.2.15.3.3.1.21 | ColumntokenRingHostInternalErrors | read-only | mandatory | The total number of adapter internal errors reported to the Ring Error Monitor. Internal error indicates that a station recognizes a recoverable internal error… |
| 1.3.6.1.4.1.23.2.15.3.3.1.22 | ColumntokenRingHostInBurstErrors | read-only | mandatory | The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit … |
| 1.3.6.1.4.1.23.2.15.3.3.1.23 | ColumntokenRingHostACErrors | read-only | mandatory | The total number of AC errors reported to the Ring Error Monitor. AC error indicates that a station cannot interpret the address recognition bit or the frame c… |
| 1.3.6.1.4.1.23.2.15.3.3.1.24 | ColumntokenRingHostAbortDelimiters | read-only | mandatory | The number of abort delimiters reported to the Ring Error Monitor. Abort delimiter indicates that a station aborts a transmission. Abort delimiter is isolated … |
| 1.3.6.1.4.1.23.2.15.3.3.1.25 | ColumntokenRingHostLostFrameErrors | read-only | mandatory | The number of lost frame errors reported to the Ring Error Monitor. Lost frame error indicates that the end delimiter of a frame is lost in the network. Lost f… |
| 1.3.6.1.4.1.23.2.15.3.3.1.26 | ColumntokenRingHostReceiveCongestions | read-only | mandatory | The number of receive congestions reported to the Ring Error Monitor. Receive congestion error indicates that a station recognizes a frame addressed to its spe… |
| 1.3.6.1.4.1.23.2.15.3.3.1.27 | ColumntokenRingHostFrameCopiedErrors | read-only | mandatory | The number of frame copied errors reported to the Ring Error Monitor. Frame copied error indicates that a station recognizes a frame addressed to its specific … |
| 1.3.6.1.4.1.23.2.15.3.3.1.28 | ColumntokenRingHostFrequencyErrors | read-only | mandatory | The number of frequency errors reported to the Ring Error Monitor. Frequency error indicates that a station detects that the frequency of the incoming signal d… |
| 1.3.6.1.4.1.23.2.15.3.3.1.29 | ColumntokenRingHostTokenErrors | read-only | mandatory | The total number of token errors reported to the Ring Error Monitor. Token error indicates that the Active Monitor station recognizes an error condition that n… |
| 1.3.6.1.4.1.23.2.15.3.3.1.30 | ColumntokenRingHostOutLineErrors | read-only | mandatory | The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated er… |
| 1.3.6.1.4.1.23.2.15.3.3.1.31 | ColumntokenRingHostOutBurstErrors | read-only | mandatory | The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit … |
| 1.3.6.1.4.1.23.2.15.3.3.1.32 | ColumntokenRingHostInBeacons | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.3.3.1.33 | ColumntokenRingHostOutBeacons | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.3.3.1.34 | ColumntokenRingHostInsertions | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.3.4 | TabletokenRingOrderTable | not-accessible | mandatory | A list of token ring host table entries. |
| 1.3.6.1.4.1.23.2.15.3.4.1 | RowtokenRingOrderEntry | not-accessible | mandatory | The information of the host that has been discovered on this interface. |
| 1.3.6.1.4.1.23.2.15.3.4.1.1 | ColumntokenRingOrderIfIndex | read-only | mandatory | This object contains the board interface number which is identical to the ifIndex object in the interface table of MIB-I or MIB-II. |
| 1.3.6.1.4.1.23.2.15.3.4.1.2 | ColumntokenRingOrderIndex | read-only | mandatory | An index that defines the relative order of the hosts in this ring starting from the Active Monitor station. The active monitor station contains the value of 1… |
| 1.3.6.1.4.1.23.2.15.3.4.1.3 | ColumntokenRingOrderStatus | read-only | mandatory | The host table contains active and inactive stations. An active station is currently participating in the ring poll process. An inactive station is vice versa.… |
| 1.3.6.1.4.1.23.2.15.3.4.1.4 | ColumntokenRingOrderLastEnterTime | read-only | mandatory | The sysUpTime that the station has entered the ring most recently or when the host entry is created. |
| 1.3.6.1.4.1.23.2.15.3.4.1.5 | ColumntokenRingOrderLastExitTime | read-only | mandatory | The sysUpTime that the station has exited the ring most recently. When this object is created, it shall reset its value to 0. It indicates that the station has… |
| 1.3.6.1.4.1.23.2.15.3.4.1.6 | ColumntokenRingOrderMACAddress | read-only | mandatory | The station's MAC address to which this entry is belonged. |
| 1.3.6.1.4.1.23.2.15.3.4.1.7 | ColumntokenRingOrderPhysicalDropNumber | read-only | mandatory | The station's physical drop number of which this entry is belonged. If the value of this object is not assigned, then it is defaulted to four zeros. |
| 1.3.6.1.4.1.23.2.15.3.4.1.8 | ColumntokenRingOrderSoftErrorReportTimerValue | read-only | mandatory | The time interval of the host station that the Report Soft Error MAC frame is generated. The default value is two seconds. The value is in units of millisecond. |
| 1.3.6.1.4.1.23.2.15.3.4.1.9 | ColumntokenRingOrderGroupAddresses | read-only | mandatory | The group address of this station. |
| 1.3.6.1.4.1.23.2.15.3.4.1.10 | ColumntokenRingOrderFunctionalAddresses | read-only | mandatory | The functional address of the station. The functional address is assigned in the bit map fashion. The first two bytes are always 'C0-00' in hex. and the first … |
| 1.3.6.1.4.1.23.2.15.3.4.1.11 | ColumntokenRingOrderAuthorizedFunctionClass | read-only | mandatory | Source classes for which the host is enabled to transmit. Valid range is '0000 0000 0000 0000'b to '1111 1111 1111 1111'b. Each bit 0 to 15 corresponds to func… |
| 1.3.6.1.4.1.23.2.15.3.4.1.12 | ColumntokenRingOrderAuthorizedAccessPriority | read-only | mandatory | Maximum allowed token priority with which the attached product is allowed to transmit. |
| 1.3.6.1.4.1.23.2.15.3.4.1.13 | ColumntokenRingOrderAdapterSoftwareLevel | read-only | mandatory | The adapter software level of this station. The interpretation of the value in this object is vendor specific. |
| 1.3.6.1.4.1.23.2.15.3.4.1.14 | ColumntokenRingOrderAdapterStatusVector | read-only | mandatory | The adapter status vector of this station. The interpretation of the value in this object is vendor specific. |
| 1.3.6.1.4.1.23.2.15.3.4.1.15 | ColumntokenRingOrderProductID | read-only | mandatory | The product identification of this station. The content is defined by vendor. |
| 1.3.6.1.4.1.23.2.15.3.4.1.16 | ColumntokenRingOrderLostMonitors | read-only | mandatory | The total number of monitor errors reported by the Report Monitor Error MAC frame. It occurs when the standby monitor fails to detect a good token in 2.6 secon… |
| 1.3.6.1.4.1.23.2.15.3.4.1.17 | ColumntokenRingOrderDuplicateMonitors | read-only | mandatory | The total number of duplicate monitor errors reported by the Report Monitor Error MAC frame. When an active monitor detects a ring purge frame or an active mon… |
| 1.3.6.1.4.1.23.2.15.3.4.1.18 | ColumntokenRingOrderDuplicateAddresses | read-only | mandatory | The total number of duplicate address errors reported by the Report Monitor Error MAC frame. It is generated by the station when it detects other stations usin… |
| 1.3.6.1.4.1.23.2.15.3.4.1.19 | ColumntokenRingOrderRingPollFailures | read-only | mandatory | The total number of Report Ring Poll Failure MAC frames received. It is generated when the active monitor cannot see a ring poll cycle completed within a time … |
| 1.3.6.1.4.1.23.2.15.3.4.1.20 | ColumntokenRingOrderInLineErrors | read-only | mandatory | The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated er… |
| 1.3.6.1.4.1.23.2.15.3.4.1.21 | ColumntokenRingOrderInternalErrors | read-only | mandatory | The total number of adapter internal errors reported to the Ring Error Monitor. Internal error indicates that a station recognizes a recoverable internal error… |
| 1.3.6.1.4.1.23.2.15.3.4.1.22 | ColumntokenRingOrderInBurstErrors | read-only | mandatory | The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit … |
| 1.3.6.1.4.1.23.2.15.3.4.1.23 | ColumntokenRingOrderACErrors | read-only | mandatory | The total number of AC errors reported to the Ring Error Monitor. AC error indicates that a station cannot interpret the address recognition bit or the frame c… |
| 1.3.6.1.4.1.23.2.15.3.4.1.24 | ColumntokenRingOrderAbortDelimiters | read-only | mandatory | The number of abort delimiters reported to the Ring Error Monitor. Abort delimiter indicates that a station aborts a transmission. Abort delimiter is isolated … |
| 1.3.6.1.4.1.23.2.15.3.4.1.25 | ColumntokenRingOrderLostFrameErrors | read-only | mandatory | The number of lost frame errors reported to the Ring Error Monitor. Lost frame error indicates that the end delimiter of a frame is lost in the network. Lost f… |
| 1.3.6.1.4.1.23.2.15.3.4.1.26 | ColumntokenRingOrderReceiveCongestions | read-only | mandatory | The number of receive congestions reported to the Ring Error Monitor. Receive congestion error indicates that a station recognizes a frame addressed to its spe… |
| 1.3.6.1.4.1.23.2.15.3.4.1.27 | ColumntokenRingOrderFrameCopiedErrors | read-only | mandatory | The number of frame copied errors reported to the Ring Error Monitor. Frame copied error indicates that a station recognizes a frame addressed to its specific … |
| 1.3.6.1.4.1.23.2.15.3.4.1.28 | ColumntokenRingOrderFrequencyErrors | read-only | mandatory | The number of frequency errors reported to the Ring Error Monitor. Frequency error indicates that a station detects that the frequency of the incoming signal d… |
| 1.3.6.1.4.1.23.2.15.3.4.1.29 | ColumntokenRingOrderTokenErrors | read-only | mandatory | The total number of token errors reported to the Ring Error Monitor. Token error indicates that the Active Monitor station recognizes an error condition that n… |
| 1.3.6.1.4.1.23.2.15.3.4.1.30 | ColumntokenRingOrderOutLineErrors | read-only | mandatory | The total number of line errors reported to the Ring Error Monitor. Line error means packet contains incorrect CRC or code violation. Line error is isolated er… |
| 1.3.6.1.4.1.23.2.15.3.4.1.31 | ColumntokenRingOrderOutBurstErrors | read-only | mandatory | The total number of burst errors reported to the Ring Error Monitor. Burst error indicates that a station detects the absence of transitions for five half-bit … |
| 1.3.6.1.4.1.23.2.15.3.4.1.32 | ColumntokenRingOrderInBeacons | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.3.4.1.33 | ColumntokenRingOrderOutBeacons | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.3.4.1.34 | ColumntokenRingOrderInsertions | read-only | mandatory | |
| 1.3.6.1.4.1.23.2.15.4 | NodetokenRingBeaconing | The SNMP trap that is generated when the token ring network starts beaconing. | ||
| 1.3.6.1.4.1.23.2.15.5 | NodetokenRingConfigurationChange | The SNMP trap that is generated when the a host has entered or exited the token ring network. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) |