Novell-LANtern-Admin-MIB
64 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23 | Nodenovell | |||
| 1.3.6.1.4.1.23.1 | NodeproductType | |||
| 1.3.6.1.4.1.23.1.1 | NodenetworkMonitor | |||
| 1.3.6.1.4.1.23.1.1.1 | NodeethernetLANtern | |||
| 1.3.6.1.4.1.23.2 | NodemibDoc | |||
| 1.3.6.1.4.1.23.2.1 | Nodelantern | |||
| 1.3.6.1.4.1.23.2.1.1 | NodelanternAdmin | |||
| 1.3.6.1.4.1.23.2.1.1.1 | ScalaradminIdentification | read-write | mandatory | An identifying ASCII string may be attached to the LANtern network monitor by writing adminIdentification. Conversely, the LANtern network monitor may be ident… |
| 1.3.6.1.4.1.23.2.1.1.2 | ScalaradminDateAndTime | read-write | mandatory | Reading adminDateAndTime returns the current date and time in use by the LANtern network monitor. The LANtern network monitor's date and time may be adjusted a… |
| 1.3.6.1.4.1.23.2.1.1.3 | ScalaradminTimeZone | read-write | mandatory | A DisplayString defining the time zone of the LANtern network monitor. adminTimeZone is neither parsed nor used by the LANtern network monitor, it is merely st… |
| 1.3.6.1.4.1.23.2.1.1.4 | ScalaradminPowerOnTime | read-only | mandatory | The date and time when the LANtern network monitor was last powered on or restarted. |
| 1.3.6.1.4.1.23.2.1.1.5 | ScalaradminPowerOffTime | read-only | mandatory | The date and time when the LANtern network monitor was last powered off or restarted. The value is 0 (midnight, 1 January 1900) after a cold start. |
| 1.3.6.1.4.1.23.2.1.1.6 | ScalaradminNetworkDataLink | read-write | mandatory | The type of data link encapsulation to be used on the monitored network. adminNetworkDataLink may be written at any time; however, the change does not take eff… |
| 1.3.6.1.4.1.23.2.1.1.7 | ScalaradminNetworkIPAddr | read-write | mandatory | The IP address to be used by the LANtern network monitor on the monitored network. adminNetworkIPAddr may be written at any time; however, the change does not … |
| 1.3.6.1.4.1.23.2.1.1.8 | ScalaradminNetworkSubnetMask | read-write | mandatory | The subnet mask for the monitored network. adminNetworkSubnetMask may be written at any time; however, the change does not take effect until the LANtern networ… |
| 1.3.6.1.4.1.23.2.1.1.9 | ScalaradminNetworkGateway | read-write | mandatory | The IP address of a gateway directly connected to the monitored network (the LANtern network monitor's default gateway). adminNetworkGateway may be written at … |
| 1.3.6.1.4.1.23.2.1.1.10 | TableadminClientTable | not-accessible | mandatory | A table providing data on all authorized LANtern clients. The table is accessed by adminClientIPAddr. A new entry may be created by writing to a nonexistent in… |
| 1.3.6.1.4.1.23.2.1.1.10.1 | RowadminClientEntry | not-accessible | mandatory | Data about each authorized client. |
| 1.3.6.1.4.1.23.2.1.1.10.1.1 | ColumnadminClientIPAddr | read-only | mandatory | The IP address (or portion thereof) of a station authorized to access the LANtern network monitor. |
| 1.3.6.1.4.1.23.2.1.1.10.1.2 | ColumnadminClientIPMask | read-write | mandatory | A 32-bit mask that is bitwise anded with the candidate client's IP address before attempting to match against adminClientIPAddr. |
| 1.3.6.1.4.1.23.2.1.1.10.1.3 | ColumnadminClientCommunities | read-write | mandatory | A bit array where the presence of a particular bit indicates that use of that particular community name is permitted. Bit Community 2^0 administrator 2^1 logge… |
| 1.3.6.1.4.1.23.2.1.1.10.1.4 | ColumnadminClientDelete | write-only | mandatory | A write (any value) causes the table entry to be deleted. |
| 1.3.6.1.4.1.23.2.1.1.11 | ScalaradminUnauthorizedIPAddr | not-accessible | mandatory | The IP address of the station that generated the authentication failure. |
| 1.3.6.1.4.1.23.2.1.1.12 | ScalaradminUnauthorizedCommunity | not-accessible | mandatory | The community name string used in the PDU that generated the authentication failure. |
| 1.3.6.1.4.1.23.2.1.1.13 | TableadminNotificationTable | not-accessible | mandatory | A list of all stations wishing to receive traps from the LANtern network monitor; accessed by adminNotificationIPAddr. A new entry may be created by writing to… |
| 1.3.6.1.4.1.23.2.1.1.13.1 | RowadminNotificationEntry | not-accessible | mandatory | Data for each station on the notification list. |
| 1.3.6.1.4.1.23.2.1.1.13.1.1 | ColumnadminNotificationIPAddr | read-only | mandatory | The IP address of the station wishing to receive traps from the LANtern network monitor. |
| 1.3.6.1.4.1.23.2.1.1.13.1.2 | ColumnadminNotificationStatus | read-write | mandatory | Traps are sent to all primaryContacts who have the corresponding bit set in adminNotificationTrapMask. Traps are sent to backupContacts only if they have the c… |
| 1.3.6.1.4.1.23.2.1.1.13.1.3 | ColumnadminNotificationTrapMask | read-write | mandatory | A bit array specifying which traps the station wishes to receive. Bit Trap 2^0 warmStart 2^1 cableFailure 2^2 reserved 2^3 duplicateIPAddr 2^4 utilizationAlarm… |
| 1.3.6.1.4.1.23.2.1.1.13.1.4 | ColumnadminNotificationConfirmMask | read-write | mandatory | A bit array specifying which traps the station wishes to receive with confirmed delivery. Any bits set must also be set in adminNotificationTrapMask. If a trap… |
| 1.3.6.1.4.1.23.2.1.1.13.1.5 | ColumnadminNotificationTimeout | read-write | mandatory | For traps with confirmed delivery, adminNotificationTimeout specifies the interval (in seconds) between retries. |
| 1.3.6.1.4.1.23.2.1.1.13.1.6 | ColumnadminNotificationRetries | read-write | mandatory | For traps with confirmed delivery, adminNotificationRetries specifies the number of retries that should be attempted before giving up and trying to deliver the… |
| 1.3.6.1.4.1.23.2.1.1.13.1.7 | ColumnadminNotificationBackupIPAddr | read-write | mandatory | For traps with confirmed delivery, adminNotificationBackupIPAddr specifies the IP address of a backup station (also in adminNotificationTable) to be contacted … |
| 1.3.6.1.4.1.23.2.1.1.13.1.8 | ColumnadminNotificationDelete | write-only | mandatory | A write (any value) causes the table entry to be deleted. |
| 1.3.6.1.4.1.23.2.1.1.14 | ScalaradminTrapHandle | not-accessible | mandatory | A unique handle that is generated for each trap issued and that is passed in the trap-PDU along with any other variable bindings. |
| 1.3.6.1.4.1.23.2.1.1.15 | ScalaradminTrapAcknowledge | write-only | mandatory | A trap is acknowledged by writing the value of adminTrapHandle passed in the trap-PDU to adminTrapAcknowledge. |
| 1.3.6.1.4.1.23.2.1.1.16 | ScalaradminDownLoadFile | read-write | mandatory | The name of the executable file to be downloaded from adminDownLoadServer. |
| 1.3.6.1.4.1.23.2.1.1.17 | ScalaradminDownLoadServer | read-write | mandatory | The name of the file server from which to download a new executable image (adminDownLoadFile). |
| 1.3.6.1.4.1.23.2.1.1.18 | ScalaradminDownload | read-write | mandatory | A write to adminDownload of temporaryChange(1) or permanentChange(2) causes the LANtern network monitor to discontinue its normal functions and perform a TFTP … |
| 1.3.6.1.4.1.23.2.1.1.19 | ScalaradminReset | write-only | mandatory | A write to adminReset causes the LANtern network monitor to discontinue its normal functions and commence a restart sequence. The contents of RAM, including al… |
| 1.3.6.1.4.1.23.2.1.1.20 | ScalaradminSerialDataLink | read-write | mandatory | The type of data link encapsulation to be used on the serial line. adminSerialDataLink may be written at any time; however, the change does not take effect unt… |
| 1.3.6.1.4.1.23.2.1.1.21 | ScalaradminSerialIPAddr | read-write | mandatory | The IP address currently in use by the LANtern network monitor on the serial channel. adminSerialIPAddr may be written at any time; however, the change does no… |
| 1.3.6.1.4.1.23.2.1.1.22 | ScalaradminSerialSubnetMask | read-write | mandatory | The subnet mask for the serial channel. adminSerialSubnetMask may be written at any time; however, the change does not take effect until the LANtern network mo… |
| 1.3.6.1.4.1.23.2.1.1.23 | ScalaradminSerialBaudRate | read-write | mandatory | A codification of the baud rate to be used on the serial line for incoming calls or when the line is directly connected. Change does not switch line speed unti… |
| 1.3.6.1.4.1.23.2.1.1.24 | ScalaradminSerialTimeout | read-write | mandatory | Once a phone connection has been established, the LANtern network monitor maintains that connection until either the other end hangs up or adminSerialTimeout s… |
| 1.3.6.1.4.1.23.2.1.1.25 | ScalaradminSerialConnection | read-write | mandatory | The type of connection used by the serial line. adminSerialConnection may be written at any time; however, the change does not take effect until the LANtern ne… |
| 1.3.6.1.4.1.23.2.1.1.26 | ScalaradminSerialFlowControl | read-write | mandatory | The type of flow control used on the serial line. adminSerialFlowControl may be written at any time; however, the change does not take effect until the LANtern… |
| 1.3.6.1.4.1.23.2.1.1.27 | ScalaradminModemControl | read-write | mandatory | A delimited string containing commands to initialize, dial, and hang up the modem. See Section 3.1.2 for more details on the format of this string. adminModemC… |
| 1.3.6.1.4.1.23.2.1.1.28 | ScalaradminModemConnect | read-write | mandatory | A delimited string containing baud rates and modem responses when it connects at particular baud rates. See Section 3.1.2 for more details on the format of thi… |
| 1.3.6.1.4.1.23.2.1.1.29 | ScalaradminModemNoConnect | read-write | mandatory | A delimited string containing baud rates and modem responses when it connects at particular baud rates. See Section 3 for more details on the format of this st… |
| 1.3.6.1.4.1.23.2.1.1.30 | ScalaradminGatewayControl | read-write | mandatory | A switch to enable or disable IP gatewaying between the serial line and the network. See Section 3 for more details on the format of this string. adminGatewayC… |
| 1.3.6.1.4.1.23.2.1.1.31 | TableadminPhoneTable | not-accessible | mandatory | A table that provides information about each possible phone connection that can be made over the serial channel. The table is accessed by adminPhoneIPAddr. A n… |
| 1.3.6.1.4.1.23.2.1.1.31.1 | RowadminPhoneEntry | not-accessible | mandatory | Data for a particular phone connection that can be established over the serial channel. |
| 1.3.6.1.4.1.23.2.1.1.31.1.1 | ColumnadminPhoneIPAddr | read-only | mandatory | The IP address of the machine or IP network (SLIP gateway) at adminPhoneNumber. |
| 1.3.6.1.4.1.23.2.1.1.31.1.2 | ColumnadminPhoneIPMask | read-write | mandatory | The IP subnet mask to be used when communicating over this phone connection. When the value 0.0.0.0 is stored in this variable, the LANtern network monitor ass… |
| 1.3.6.1.4.1.23.2.1.1.31.1.3 | ColumnadminPhoneLocalIPAddr | read-write | mandatory | The IP address the LANtern network monitor uses for its serial port while communicating over this phone connection. |
| 1.3.6.1.4.1.23.2.1.1.31.1.4 | ColumnadminPhoneNumber | read-write | mandatory | The phone number string the modem uses to dial the machine with IP address adminPhoneIPAddr. |
| 1.3.6.1.4.1.23.2.1.1.31.1.5 | ColumnadminPhoneConnectionProtocol | read-write | mandatory | An ASCII string specifying the logon sequence once the phone is connected. |
| 1.3.6.1.4.1.23.2.1.1.31.1.6 | ColumnadminPhoneDelete | write-only | mandatory | A write (any value) causes the table entry to be deleted. |
| 1.3.6.1.4.1.23.2.1.1.32 | ScalaradminFCBControl | read-write | mandatory | A switch to disable the packet capture feature. To enable this flag (after disabling it) a cool start must apply to the LANtern in order to gain access into th… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING | ||
| Seconds | INTEGER | ||
| Time | INTEGER |