OCCAM-SENSOR-MIB
40 objects
The OCCAM-ENTITY-SENSOR-MIB is used to monitor the values of Sensors in the BLC1100.
Imported Objects
| OCCAM-ENTITY-MIB | PhysicalIndex |
| OCCAM-REG-MODULE | occamGenericHardwareModules |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6066.2.1.3.2 | IdentitysensorMIB | The OCCAM-ENTITY-SENSOR-MIB is used to monitor the values of Sensors in the BLC1100. | ||
| 1.3.6.1.4.1.6066.2.1.3.2.1 | NodesensorMIBObjects | |||
| 1.3.6.1.4.1.6066.2.1.3.2.1.1 | NodesensorValues | |||
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1 | TablesensorTable | not-accessible | current | This table lists the type, scale, and present value of a Sensor in the BLC1100. |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1 | RowsensorEntry | not-accessible | current | An sensorTable entry describes the present reading of a Sensor, the measurement units and scale, and Sensor operational status. |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.1 | ColumnsensorIndex | not-accessible | current | This serves as an index for identifying the sensor. |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.2 | ColumnsensorName | read-only | current | This is the textual description of the name of the sensor.For e.g., in the BLC1100 there are two temperature Sensors,and their locations ExternalTempSensor and… |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.3 | ColumnsensorType | read-only | current | This variable indicates the type of data reported by the sensorValue. This variable is set by the agent at start-up and the value does not change during operat… |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.4 | ColumnsensorValue | read-only | current | This variable reports the most recent measurement seen by the Sensor. To correctly display or interpret this variable's value, you must also know sensorType, s… |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.5 | ColumnsensorScale | read-only | current | This variable indicates the exponent to apply to sensor values reported by entSensorValue. This variable is set by the agent at start-up and the value does not… |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.6 | ColumnsensorTimeStamp | read-only | current | This variable indicates the age of the value reported by sensorValue |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.1.1.7 | ColumnsensorEventType | read-only | current | This variable indicates the event type reported by the sensor. The possible values are: Cleared, LowLimitExceeded, HighLimitExceeded, AlarmInOn, AlarmInOff, Fa… |
| 1.3.6.1.4.1.6066.2.1.3.2.1.1.2 | ScalaroccamExtAlarmDescription | accessible-for-notify | current | This is the value of the alarm-description as entered by the user. The string is associated with the external alarm detection mechanism and as a variable bindi… |
| 1.3.6.1.4.1.6066.2.1.3.2.1.2 | NodesensorThresholds | |||
| 1.3.6.1.4.1.6066.2.1.3.2.1.2.1 | TablesensorThresholdTable | not-accessible | current | This table lists the threshold severity, relation, and comparison value for a Sensor listed in the sensor Table. |
| 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1 | RowsensorThresholdEntry | not-accessible | current | An sensorThresholdTable entry describes the thresholds for a Sensor: the threshold severity, the threshold value, the relation, and the evaluation of the thres… |
| 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.1 | ColumnsensorThresholdIndex | not-accessible | current | An index that uniquely identifies an entry in the sensorThreshold table. This index permits the same Sensor to have several different thresholds. |
| 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.2 | ColumnsensorThresholdSeverity | read-only | current | This variable indicates the severity of this threshold. |
| 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.3 | ColumnsensorThresholdRelation | read-only | current | This variable indicates the relation between Sensor value (sensorValue) and threshold value senshresholdValue), required to trigger the alarm. when evaluating … |
| 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.4 | ColumnsensorThresholdValue | read-only | current | This variable indicates the value of the threshold. To correctly display or interpret this variable's value, you must also know sensorType, sensorScale, and se… |
| 1.3.6.1.4.1.6066.2.1.3.2.1.2.1.1.5 | ColumnsensorThresholdNotificationEnable | read-write | current | This variable controls generation of sensorThresholdNotification for this threshold. When this variable is true(1), generation of sensorThresholdNotification i… |
| 1.3.6.1.4.1.6066.2.1.3.2.2 | NodesensorMIBTraps | |||
| 1.3.6.1.4.1.6066.2.1.3.2.2.0 | NodesensorMIBTrapsSubID | |||
| 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 | NotificationsensorThresholdNotification | current | The Sensor value crossed the threshold listed in sensorThresholdTable. This notification is generated once each time the Sensor value crosses the threshold. Th… | |
| 1.3.6.1.4.1.6066.2.1.3.2.2.0.2 | NotificationoccamExtAlarmRaised | current | An external alarm has been detected, the alarm is described in the associated variable binding. | |
| 1.3.6.1.4.1.6066.2.1.3.2.2.0.3 | NotificationoccamExtAlarmCleared | current | The condition causing the external alarm has been cleared, the alarm is described in the associated variable binding. | |
| 1.3.6.1.4.1.6066.2.1.3.2.3 | NodesensorMIBConformance | |||
| 1.3.6.1.4.1.6066.2.1.3.2.3.1 | NodesensorMIBGroups | |||
| 1.3.6.1.4.1.6066.2.1.3.2.3.1.1 | NodesensorMIBObjectGroups | |||
| 1.3.6.1.4.1.6066.2.1.3.2.3.1.1.1 | GroupsensorGroup | current | The collection of objects which are used to describe and monitor values of Entity-MIB entPhysicalTable entries of Sensors. | |
| 1.3.6.1.4.1.6066.2.1.3.2.3.1.1.2 | GroupsensorThresholdGroup | current | The collection of objects which are used to describe and monitor thresholds for Sensors. | |
| 1.3.6.1.4.1.6066.2.1.3.2.3.1.2 | NodesensorMIBEventGroups | |||
| 1.3.6.1.4.1.6066.2.1.3.2.3.2 | NodesensorMIBCompliances | |||
| 1.3.6.1.4.1.6066.2.1.3.2.3.2.1 | CompliancesensorMIBCompliance | current | An Entity-MIB implementation that lists Sensors in its entPhysicalTable must implement this group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SensorDataScale | INTEGER { micro (1), milli (2), centi (3), units (4), kilo (5), mega (6) } | current | International System of Units (SI) prefixes. |
| SensorDataType | INTEGER { other(1), volts(2), celsius(3), rpm(4), milliAmp(5), microAmp(6), milliWatt(7), microWatt(8), alarmInput(9), sdram(10), usage(11), count(12) } | current | Sensor measurement data types. valid values are: other(1): a measure other than those listed below volts(2): electric potential celsius(3): temperature rpm(4): fan revolutions per minute milliAmp(5): milliampere microAm… |
| SensorStatus | INTEGER { ok(1), unavailable(2), nonoperational(3) } | current | Indicates the operational status of the Sensor. ok(1): The agent can read the Sensor value. unavailable(2): The agent presently can not report the Sensor value. nonoperational(3): The agent believes the Sensor is broken… |
| SensorThresholdRelation | INTEGER{ lessThan(1), lessOrEqual(2), greaterThan(3), greaterOrEqual(4), equalTo(5), notEqualTo(6)} | current | Sensor threshold relational operator types. valid values are: lessThan(1): if the Sensor value is less than the threshold value lessOrEqual(2): if the Sensor value is less than or equal to the threshold value greaterTha… |
| SensorThresholdSeverity | INTEGER { other(1), minor(10), major(20), critical(30) } | current | Sensor threshold severity. Valid values are: other(1): a severity other than those listed below. minor(10): Minor Problem threshold. major(20): Major Problem threshold. critical(30): Critical Problem Threshold. |
| SensorValue | Integer32 ( -100000 .. 100000 ) | current | For Sensors that measure voltsAC, voltsDC, celsius this item is a fixed point number ranging from -99,999 to +99,999. Use the value -100000 to indicate underflow. Use the value +100000 to indicate overflow. Use SensorPr… |