OCTOPUSE-MIB
107 objects
Octopus E MIB.
Imported Objects
| RFC1155-SMI | IpAddress |
| SNMPv2-SMI | enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231 | Nodesni | |||
| 1.3.6.1.4.1.231.7 | NodesiemensUnits | |||
| 1.3.6.1.4.1.231.7.2 | Nodepn | |||
| 1.3.6.1.4.1.231.7.2.9 | IdentityoctopusE | Octopus E MIB. | ||
| 1.3.6.1.4.1.231.7.2.9.1 | NodeoctoControlGroup | |||
| 1.3.6.1.4.1.231.7.2.9.1.1 | ScalaroctoSysState | read-write | current | The actual error state of the Octopus E PABX. Contains the highest severity level of the recent error events. This object is updated automatically, but it can … |
| 1.3.6.1.4.1.231.7.2.9.1.2 | ScalartftpSwitchoverDateTime | read-write | current | Date and time for the switchover to the new system software. The configured time will be ignored, if the upgrade is started with the downloadAndImmediateSwitch… |
| 1.3.6.1.4.1.231.7.2.9.1.3 | ScalartftpDownloadAction | read-write | current | When this object is set to downloadAndImmediateSwitchover (2), the device will download the new software from the configured host. After the download is finish… |
| 1.3.6.1.4.1.231.7.2.9.1.4 | ScalaroctoResetControl | read-write | current | Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Wh… |
| 1.3.6.1.4.1.231.7.2.9.1.5 | ScalaroctoSwitchoverState | read-write | current | The values readyForSwitchover (1) and notReadyForSwitchover (2) indicate whether the system is ready to be switched over to the new software that was downloade… |
| 1.3.6.1.4.1.231.7.2.9.1.6 | ScalaroctoShadowFlashState | read-write | current | This object informs about the state of the shadow flash memory area which is used to buffer a new software image that is being downloaded to the system. A down… |
| 1.3.6.1.4.1.231.7.2.9.1.7 | ScalaroctoLoadLevel | read-only | current | The actual CPU load level (per cent). |
| 1.3.6.1.4.1.231.7.2.9.1.8 | ScalaroctoTrapRepetitions | read-write | current | The number of trap repetitions for error events marked as very important (log-and-multiple-trap). |
| 1.3.6.1.4.1.231.7.2.9.1.9 | ScalaroctoCdrBufferState | read-write | current | Use this object to delete the CDR buffer. |
| 1.3.6.1.4.1.231.7.2.9.1.10 | ScalaroctoLogBufferState | read-write | current | Use this object to delete the log data. |
| 1.3.6.1.4.1.231.7.2.9.2 | NodeoctoErrorHistoryGroup | |||
| 1.3.6.1.4.1.231.7.2.9.2.1 | ScalarnumberOfErrorHistoryEntries | read-write | current | Contains the number of errors to be found in the error history table. This value can be used to delete the last x entries (reduce value by x) or to delete all … |
| 1.3.6.1.4.1.231.7.2.9.2.2 | TableoctoErrorHistoryTable | not-accessible | current | This table contains information about the errors that occured. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1 | RowoctoErrorHistoryEntry | not-accessible | current | The trap history table entries. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.1 | ColumnoctoErrorIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.2 | ColumnoctoErrorDateTime | read-only | current | Time, when the error occurred. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.3 | ColumnoctoErrorClass | read-only | current | Contains the error class number (type of trap). |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.4 | ColumnoctoErrorCode | read-only | current | Contains the error code. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.5 | ColumnoctoAccessSlot | read-only | current | Contains the access slot for the error. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.6 | ColumnoctoAccessPort | read-only | current | Contains the local access port of the error. Local means that port numbering starts with 0 for each card. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.7 | ColumnoctoErrorDescription | read-only | current | Detailed information about errors. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.8 | ColumnoctoErrorSeverity | read-only | current | Contains the severity of the specific error. |
| 1.3.6.1.4.1.231.7.2.9.3 | NodeoctoSystemInfoGroup | |||
| 1.3.6.1.4.1.231.7.2.9.3.1 | ScalarsysHardwareVersion | read-only | current | Contains the version string of the system hardware. |
| 1.3.6.1.4.1.231.7.2.9.3.2 | ScalarsysSoftwareVersion | read-only | current | Contains the version string of the system software. |
| 1.3.6.1.4.1.231.7.2.9.3.3 | ScalarsysCodeNumber | read-only | current | Contains the code number of the system software. |
| 1.3.6.1.4.1.231.7.2.9.3.4 | ScalarsysSoftwareLocation | read-only | current | Contains location (address space) where the system software is currently running. |
| 1.3.6.1.4.1.231.7.2.9.3.5 | ScalarnumberOfSlotTableEntries | read-only | current | Contains the number of entries in the slot table. |
| 1.3.6.1.4.1.231.7.2.9.3.6 | TableoctoSlotTable | not-accessible | current | This table contains information about the system slots. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1 | RowoctoSlotTableEntry | not-accessible | current | The slot table entries. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.1 | ColumncardIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.2 | ColumncardBoxNum | read-only | current | Index of the box where the card is placed. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.3 | ColumncardSlotNum | read-only | current | Index of the slot where the card is placed. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.4 | ColumncardType | read-only | current | Code for the type of the card. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.5 | ColumncardDescription | read-only | current | Textual card description. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.6 | ColumncardCodeNumber | read-only | current | Contains the code number of the card software. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.7 | ColumncardState | read-only | current | Contains the state of the card. |
| 1.3.6.1.4.1.231.7.2.9.3.7 | ScalarnumberOfPortTableEntries | read-only | current | Contains the number of entries in the port table. |
| 1.3.6.1.4.1.231.7.2.9.3.8 | TableoctoPortTable | not-accessible | current | This table contains information about the system ports. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1 | RowoctoPortTableEntry | not-accessible | current | The port table entries. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.1 | ColumnportIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.2 | ColumnportCardIndex | read-only | current | Reference to the card the port is assigned to. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.3 | ColumnportType | read-only | current | Contains the type of the port. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.4 | ColumnportState | read-only | current | Contains the general state of the port. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.5 | ColumnportLock | read-write | current | This object contains the lock state of the port. A software lock can be enabled / disabled. Possible state transitions: unlocked -> lockedBySoftware lockedByHa… |
| 1.3.6.1.4.1.231.7.2.9.3.9 | ScalarnumberOfExtensionTableEntries | read-only | current | Contains the number of entries in the hardware extension table. |
| 1.3.6.1.4.1.231.7.2.9.3.10 | TableoctoExtensionTable | not-accessible | current | This table contains information about the hardware extensions. |
| 1.3.6.1.4.1.231.7.2.9.3.10.1 | RowoctoExtensionTableEntry | not-accessible | current | The extension table entries. |
| 1.3.6.1.4.1.231.7.2.9.3.10.1.1 | ColumnextensionIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.3.10.1.2 | ColumnextensionDescription | read-only | current | Contains a textual desription of the hardware extension. |
| 1.3.6.1.4.1.231.7.2.9.3.10.1.3 | ColumnextensionCodeNumber | read-only | current | Contains the code number of the hardware extension. |
| 1.3.6.1.4.1.231.7.2.9.3.11 | ScalarnumberOfLanConnTableEntries | read-only | current | Contains the number of entries in the LAN connection table. |
| 1.3.6.1.4.1.231.7.2.9.3.12 | TableoctoLanConnTable | not-accessible | current | This table contains information about the interfaces available for LAN access of the device or its cards. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1 | RowoctoLanConnTableEntry | not-accessible | current | The LAN connection table entries. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.1 | ColumnlanConnIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.2 | ColumnlanConnDescription | read-only | current | Textual desription on the LAN connection. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.3 | ColumnlanConnIpAddress | read-only | current | IP address of the LAN connection. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.4 | ColumnlanConnSubnetMask | read-only | current | Subnet mask of the LAN connection. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.5 | ColumnlanConnStatus | read-only | current | Status of the LAN Connection. |
| 1.3.6.1.4.1.231.7.2.9.3.13 | ScalarhiPathAllServeServerIpAddress | read-only | current | IP address of the HiPath AllServe (Venus) server. |
| 1.3.6.1.4.1.231.7.2.9.3.14 | ScalarindexOfLastPortStatusNotificationTrap | read-write | current | Index of last 'port status change' notification trap sent by the device. Note: only reset possible (0) |
| 1.3.6.1.4.1.231.7.2.9.3.15 | ScalarsysSnmpAgentVersion | read-only | current | Version number of the systems SNMP agent (formatting: x.y.z.) |
| 1.3.6.1.4.1.231.7.2.9.4 | NodeoctoStatisticsGroup | |||
| 1.3.6.1.4.1.231.7.2.9.4.1 | ScalarnumberOfFeatureStatTableEntries | read-only | current | Contains the number of feature counters to be found in the table. |
| 1.3.6.1.4.1.231.7.2.9.4.2 | TableoctoFeatureStatTable | not-accessible | current | This table contains information about the usage of specific system features. It is designed to monitor the use of these features for a limited time only, becau… |
| 1.3.6.1.4.1.231.7.2.9.4.2.1 | RowoctoFeatureStatEntry | not-accessible | current | The feature statistics table entries. |
| 1.3.6.1.4.1.231.7.2.9.4.2.1.1 | ColumnfeatureIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.4.2.1.2 | ColumnfeatureDescription | read-only | current | Description of the feature. |
| 1.3.6.1.4.1.231.7.2.9.4.2.1.3 | ColumnfeatureCounter | read-only | current | This Counter indicates how often the feature was used since last system reload |
| 1.3.6.1.4.1.231.7.2.9.4.3 | ScalarfeatureStatTableReset | read-write | current | Enables reset (2) of all counters of the featureStatTable. |
| 1.3.6.1.4.1.231.7.2.9.5 | NodeoctoCdrConfigGroup | |||
| 1.3.6.1.4.1.231.7.2.9.5.1 | ScalaroctoCdrSeparator | read-write | current | Separator between following CDRs: DOS mode (1): CRLF UNIX mode (2): LF |
| 1.3.6.1.4.1.231.7.2.9.5.2 | ScalaroctoCdrElementSeparator | read-write | current | Separator between the different elements of one CDR: pipe (0x7c): '|' semicolon (0x3b): ';' blank (0x20): ' ' NOTE: no write access for blank |
| 1.3.6.1.4.1.231.7.2.9.5.3 | ScalaroctoCdrThresholdValue | read-write | current | CDR buffer limit (only relevant for TFTP server mode): threshold value (in percent) for sending a CDR data notification trap recommended values: 0 to 80 |
| 1.3.6.1.4.1.231.7.2.9.5.4 | ScalaroctoCdrTftpFileCounter | read-write | current | CDR <FileCounter> (only relevant for TFTP client mode): For each transferred CDR-file a new filename is necassary filename: 'GDS<IPAdr>.c<FileCounter>' |
| 1.3.6.1.4.1.231.7.2.9.5.5 | ScalaroctoCdrTftpServerDestAddress | read-write | current | Destination IP addresse of CDR TFTP server (only relevant for TFTP client mode) |
| 1.3.6.1.4.1.231.7.2.9.5.6 | ScalaroctoCdrTftpServerAlternateDestAddress | read-write | current | Alternate destination IP addresse of CDR TFTP server (only relevant for TFTP client mode): is the CDR TFTP Server not reachable the switch transfers CDR data t… |
| 1.3.6.1.4.1.231.7.2.9.5.7 | ScalaroctoCdrTftpClientTimer | read-write | current | cycle time in minutes for initiating CDR output, max value 1439 minutes (23hours,59minutes) (only relevant for TFTP client mode) |
| 1.3.6.1.4.1.231.7.2.9.5.8 | ScalaroctoCdrTcpServerDestAddress | read-write | current | Destination IP addresse of CDR TCP server (only relevant for TCP client mode) |
| 1.3.6.1.4.1.231.7.2.9.5.9 | ScalaroctoCdrTcpServerDestPort | read-write | current | Destination TCP port of CDR TCP server (only relevant for TCP client mode) |
| 1.3.6.1.4.1.231.7.2.9.5.10 | ScalaroctoCdrOutputMode | read-write | current | CDR (Call Detailed Record) output mode: V24-Port (1): the device is permanently connected over a V.24 connection to an extern application and sends each CDR im… |
| 1.3.6.1.4.1.231.7.2.9.5.11 | ScalaroctoIndexOfLastCdrNotificationTrap | read-write | current | Index of last CDR notification trap sent by the device Note: only reset possible (0) |
| 1.3.6.1.4.1.231.7.2.9.5.12 | ScalaroctoTypeOfLastCdrNotificationTrap | read-only | current | Type of last CDR notification trap sent by the device: (1) : error - CDR buffer overflow (2) : warning - CDR buffer is filled up over 80% (3) : notification - … |
| 1.3.6.1.4.1.231.7.2.9.5.13 | ScalaroctoDescriptionOfLastCdrNotificationTrap | read-only | current | Textual description of last CDR notification trap sent by the device |
| 1.3.6.1.4.1.231.7.2.9.6 | NodeoctoTrapSpecifications | |||
| 1.3.6.1.4.1.231.7.2.9.6.1 | NotificationsendAlarm | current | If an error occurs, there will be checked if the errorClass is configured to trigger an immediate signalling. If so, a trap will be send to the management stat… | |
| 1.3.6.1.4.1.231.7.2.9.6.2 | NotificationsendCdrNotification | current | The CDR notification trap is sent to trigger further actions by the management station, for instance download of CDR data. | |
| 1.3.6.1.4.1.231.7.2.9.6.3 | NotificationsendPortStatusNotification | current | The 'port status change' notification trap is sent to trigger a polling of the port table by a management station. It indicates one or more changes in port sta… | |
| 1.3.6.1.4.1.231.7.2.9.7 | NodeoctoNetworkGroup | |||
| 1.3.6.1.4.1.231.7.2.9.7.1 | ScalarnumberOfIpConnControlTableEntries | read-write | current | Contains the number of ip connection control entries to be found in the table. Set this value to 0 to remove all connection control entries. |
| 1.3.6.1.4.1.231.7.2.9.7.2 | TableipConnControlTable | not-accessible | current | This table can be used to control manual or automatic (periodical) checks of important ip connections from the device to a limited number of ip counterparts us… |
| 1.3.6.1.4.1.231.7.2.9.7.2.1 | RowipConnControlEntry | not-accessible | current | The ip connection control table entries. |
| 1.3.6.1.4.1.231.7.2.9.7.2.1.1 | ColumnconnControlIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.7.2.1.2 | ColumnconnPartnerIpAddress | read-write | current | This is a partner ip address of a ip connection to be supervised. |
| 1.3.6.1.4.1.231.7.2.9.7.2.1.3 | ColumnconnTimeout | read-write | current | Timeout (in ms) for the 'local ping' mechanism which is used to supervise ip connections. |
| 1.3.6.1.4.1.231.7.2.9.7.2.1.4 | ColumnconnRetries | read-write | current | Number of retries for the 'local ping' mechanism which is used to supervise ip connections. |
| 1.3.6.1.4.1.231.7.2.9.7.2.1.5 | ColumnconnRetryTimer | read-write | current | Retry timer (in ms) for the 'local ping' mechanism which is used to supervise ip connections. |
| 1.3.6.1.4.1.231.7.2.9.7.2.1.6 | ColumnconnResult | read-only | current | The result of the supervision of the given ip connection. disonnected vs. connected is the result of the last check, if supervision has been started. not_activ… |
| 1.3.6.1.4.1.231.7.2.9.7.2.1.7 | ColumnconnControlState | read-write | current | This object is used to start/stop the supervision of ip connections. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateAndTime | OCTET STRING (SIZE (8)) | current | A date-time specification identical to rfc 1443 definition. field octets contents range 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 d… |
| DisplayString | OCTET STRING | ||
| ReadWrite | INTEGER { readWrite(1), readOnly(2) } | current | A textual convention for describing objects that enable or disable some sort of write access. |