OMNI-gx2drr4x-MIB
172 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.14.1 | Nodegx2drr4xDescriptor | |||
| 1.3.6.1.4.1.1166.6.1.2.14.1 | NodetrapdrrConfigChangeInteger | This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain curre… | ||
| 1.3.6.1.4.1.1166.6.1.2.14.2 | Tablegx2drr4xAnalogTable | not-accessible | mandatory | This table contains gx2drr4x specific analog parameters with nominal,limits and current values. |
| 1.3.6.1.4.1.1166.6.1.2.14.2 | NodetrapdrrConfigChangeDisplayString | This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may … | ||
| 1.3.6.1.4.1.1166.6.1.2.14.2.1 | Rowgx2drr4xAnalogEntry | not-accessible | mandatory | This list contains the analog parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.1 | Columngx2drr4xAnalogTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.2 | Columndrr4xlabelRFAAttenuation | read-only | optional | The value of this object provides the label of the RF Channel A Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.3 | Columndrr4xuomRFAAttenuation | read-only | optional | The value of this object provides the Unit of Measure of the RF Channel A Attenuation Analog parameter. The unit is in dB |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.4 | Columndrr4xmajorHighRFAAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.5 | Columndrr4xmajorLowRFAAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.6 | Columndrr4xminorHighRFAAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.7 | Columndrr4xminorLowRFAAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.8 | Columndrr4xcurrentValueRFAAttenuation | read-write | mandatory | The value of this object provides the Current value of the RF Channel A Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.9 | Columndrr4xstateFlagRFAAttenuation | read-only | mandatory | The value of this object provides the state of the RF Channel A Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.10 | Columndrr4xminValueRFAAttenuation | read-only | mandatory | The value of this object provides the minimum value the RF Channel A Attenuation Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.11 | Columndrr4xmaxValueRFAAttenuation | read-only | mandatory | The value of this object provides the maximum value the RF Channel A Attenuation Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.12 | Columndrr4xalarmStateRFAAttenuation | read-only | mandatory | The value of this object provides the curent alarm state of the RF Channel A Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.13 | Columndrr4xlabelRFBAttenuation | read-only | optional | The value of this object provides the label of the RF Channel B Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.14 | Columndrr4xuomRFBAttenuation | read-only | optional | The value of this object provides the Unit of Measure of the RF Channel B Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.15 | Columndrr4xmajorHighRFBAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.16 | Columndrr4xmajorLowRFBAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.17 | Columndrr4xminorHighRFBAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.18 | Columndrr4xminorLowRFBAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.19 | Columndrr4xcurrentValueRFBAttenuation | read-write | mandatory | The value of this object provides the Current value of the RF Channel B Attenuation Analog parameter. The unit is dB |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.20 | Columndrr4xstateFlagRFBAttenuation | read-only | mandatory | The value of this object provides the state of the RF Channel B Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.21 | Columndrr4xminValueRFBAttenuation | read-only | mandatory | The value of this object provides the minimum value the RF Channel B Attenuation Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.22 | Columndrr4xmaxValueRFBAttenuation | read-only | mandatory | The value of this object provides the maximum value the RF Channel B Attenuation Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.23 | Columndrr4xalarmStateRFBAttenuation | read-only | mandatory | The value of this object provides the curent alarm state of the RF Channel B Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.24 | Columndrr4xlabelRFCAttenuation | read-only | optional | The value of this object provides the label of the RF Channel C Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.25 | Columndrr4xuomRFCAttenuation | read-only | optional | The value of this object provides the Unit of Measure of the RF Channel C Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.26 | Columndrr4xmajorHighRFCAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.27 | Columndrr4xmajorLowRFCAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.28 | Columndrr4xminorHighRFCAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.29 | Columndrr4xminorLowRFCAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.30 | Columndrr4xcurrentValueRFCAttenuation | read-write | mandatory | The value of this object provides the Current value of the RF Channel C Attenuation Analog parameter. The unit is dB |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.31 | Columndrr4xstateFlagRFCAttenuation | read-only | mandatory | The value of this object provides the state of the RF Channel C Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.32 | Columndrr4xminValueRFCAttenuation | read-only | mandatory | The value of this object provides the minimum value the RF Channel C Attenuation Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.33 | Columndrr4xmaxValueRFCAttenuation | read-only | mandatory | The value of this object provides the maximum value the RF Channel C Attenuation Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.34 | Columndrr4xalarmStateRFCAttenuation | read-only | mandatory | The value of this object provides the curent alarm state of the RF Channel C Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.35 | Columndrr4xlabelRFDAttenuation | read-only | optional | The value of this object provides the label of the RF Channel D Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.36 | Columndrr4xuomRFDAttenuation | read-only | optional | The value of this object provides the Unit of Measure of the RF Channel D Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.37 | Columndrr4xmajorHighRFDAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.38 | Columndrr4xmajorLowRFDAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.39 | Columndrr4xminorHighRFDAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.40 | Columndrr4xminorLowRFDAttenuation | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.41 | Columndrr4xcurrentValueRFDAttenuation | read-write | mandatory | The value of this object provides the Current value of the RF Channel D Attenuation Analog parameter. The unit is dB |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.42 | Columndrr4xstateFlagRFDAttenuation | read-only | mandatory | The value of this object provides the state of the RF Channel D Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.43 | Columndrr4xminValueRFDAttenuation | read-only | mandatory | The value of this object provides the minimum value the RF Channel B Attenuation Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.44 | Columndrr4xmaxValueRFDAttenuation | read-only | mandatory | The value of this object provides the maximum value the RF Channel D Attenuation Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.45 | Columndrr4xalarmStateRFDAttenuation | read-only | mandatory | The value of this object provides the curent alarm state of the RF Channel D Attenuation Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.46 | Columndrr4xlabelTrippointLevel | read-only | optional | The value of this object provides the label of the trip point level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.47 | Columndrr4xuomTrippointLevel | read-only | optional | The value of this object provides the Unit of Measure of the trip point level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.48 | Columndrr4xmajorHighTrippointLevel | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.49 | Columndrr4xmajorLowTrippointLevel | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.50 | Columndrr4xminorHighTrippointLevel | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.51 | Columndrr4xminorLowTrippointLevel | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.52 | Columndrr4xcurrentValueTrippointLevel | read-write | mandatory | The value of this object provides the Current value of the trip point level Analog parameter. The trip point level set the custumer preferred optical input lev… |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.53 | Columndrr4xstateFlagTrippointLevel | read-only | mandatory | The value of this object provides the state of the trip point level Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.54 | Columndrr4xminValueTrippointLevel | read-only | mandatory | The value of this object provides the minimum value the trip point level Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.55 | Columndrr4xmaxValueTrippointLevel | read-only | mandatory | The value of this object provides the maximum value the trip point level Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.56 | Columndrr4xalarmStateTrippointLevel | read-only | mandatory | The value of this object provides the curent alarm state of the trip point level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.57 | Columndrr4xlabelOptCurrent | read-only | optional | The value of this object provides the label of the Optical Power Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.58 | Columndrr4xuomOptCurrent | read-only | optional | The value of this object provides the Unit of Measure of the Optical Power Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.59 | Columndrr4xmajorHighOptCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the Optical Power Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.60 | Columndrr4xmajorLowOptCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the Optical Power Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.61 | Columndrr4xminorHighOptCurrent | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.62 | Columndrr4xminorLowOptCurrent | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.63 | Columndrr4xcurrentValueOptCurrent | read-only | mandatory | The value of this object provides the Current value of the Optical Power Current Analog parameter. The input optical power in lower than min value, drr4xcurren… |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.64 | Columndrr4xstateFlagOptCurrent | read-only | mandatory | The value of this object provides the state of the Optical Power Current Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.65 | Columndrr4xminValueOptCurrent | read-only | mandatory | This is recommended min range for display gauge |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.66 | Columndrr4xmaxValueOptCurrent | read-only | mandatory | This is recommended max range for display gauge |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.67 | Columndrr4xalarmStateOptCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the Optical Power Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.68 | Columndrr4xlabel12VCurrent | read-only | optional | The value of this object provides the label of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.69 | Columndrr4xuom12VCurrent | read-only | optional | The value of this object provides the Unit of Measure of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.70 | Columndrr4xmajorHigh12VCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.71 | Columndrr4xmajorLow12VCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.72 | Columndrr4xminorHigh12VCurrent | read-only | mandatory | The value of this object provides the Minor High alarm value of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.73 | Columndrr4xminorLow12VCurrent | read-only | mandatory | The value of this object provides the Minor Low alarm value of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.74 | Columndrr4xcurrentValue12VCurrent | read-only | mandatory | The value of this object provides the Current value of the 12v power supply Current parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.75 | Columndrr4xstateFlag12VCurrent | read-only | mandatory | The value of this object provides the state of the 12v power supply Current Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.76 | Columndrr4xminValue12VCurrent | read-only | mandatory | The value of this object provides the minimum value the 12v power supply Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.77 | Columndrr4xmaxValue12VCurrent | read-only | mandatory | The value of this object provides the maximum value the 12v power supply Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.78 | Columndrr4xalarmState12VCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.79 | Columndrr4xlabelModTemp | read-only | optional | The value of this object provides the label of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.80 | Columndrr4xuomModTemp | read-only | optional | The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.81 | Columndrr4xmajorHighModTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.82 | Columndrr4xmajorLowModTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.83 | Columndrr4xminorHighModTemp | read-only | mandatory | The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.84 | Columndrr4xminorLowModTemp | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.85 | Columndrr4xcurrentValueModTemp | read-only | mandatory | The value of this object provides the Current value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.86 | Columndrr4xstateFlagModTemp | read-only | mandatory | The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.87 | Columndrr4xminValueModTemp | read-only | mandatory | The value of this object provides the minimum value the Module Temperature Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.88 | Columndrr4xmaxValueModTemp | read-only | mandatory | The value of this object provides the maximum value the Module Temperature Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.89 | Columndrr4xalarmStateModTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.90 | Columndrr4xlabelFanCurrent | read-only | optional | The value of this object provides the label of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.91 | Columndrr4xuomFanCurrent | read-only | optional | The value of this object provides the Unit of Measure of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.92 | Columndrr4xmajorHighFanCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.93 | Columndrr4xmajorLowFanCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.94 | Columndrr4xminorHighFanCurrent | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.95 | Columndrr4xminorLowFanCurrent | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.96 | Columndrr4xcurrentValueFanCurrent | read-only | mandatory | The value of this object provides the Current value of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.97 | Columndrr4xstateFlagFanCurrent | read-only | mandatory | The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.98 | Columndrr4xminValueFanCurrent | read-only | mandatory | The value of this object provides the minimum value the Fan Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.99 | Columndrr4xmaxValueFanCurrent | read-only | mandatory | The value of this object provides the maximum value the Fan Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.14.2.1.100 | Columndrr4xalarmStateFanCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.3 | Tablegx2drr4xDigitalTable | not-accessible | mandatory | This table contains gx2drr4x specific digital parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.14.3 | Nodetrapdrr12VCurrentAlarm | This trap is issued when the 12V power supply Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this para… | ||
| 1.3.6.1.4.1.1166.6.1.2.14.3.2 | Rowgx2drr4xDigitalEntry | not-accessible | mandatory | This list contains individual digital parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.1 | Columngx2drr4xDigitalTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.2 | Columndrr4xlabelTrippointMode | read-only | optional | The value of this object provides the label of the Trip point mode Digital parameter. The trip point mode defines the RF switch action based on the optical pow… |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.3 | Columndrr4xenumTrippointMode | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.4 | Columndrr4xvalueTrippointMode | read-write | mandatory | The value of this object is the current value of trip point mode. There are three possible value: 1-off, 2-alarm_only, 3-alarm&switch. If module input optical … |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.5 | Columndrr4xstateflagTrippointMode | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.6 | Columndrr4xlabelFactoryDefaultReset | read-only | optional | The value of this object provides the label of the Factory Default Reset Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.7 | Columndrr4xenumFactoryDefaultReset | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.8 | Columndrr4xvalueFactoryDefaultReset | read-write | mandatory | The read of this value will return a invalid value. The read will not reflect the actual setting value for this parameter |
| 1.3.6.1.4.1.1166.6.1.2.14.3.2.9 | Columndrr4xstateflagFactoryDefaultReset | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.4 | Tablegx2drr4xStatusTable | not-accessible | mandatory | This table contains gx2drr4x specific status parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.14.4 | NodetrapdrrModuleTempAlarm | This trap is issued when the Internal Module Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.4.3 | Rowgx2drr4xStatusEntry | not-accessible | mandatory | This list contains Status parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.1 | Columngx2drr4xStatusTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.2 | Columndrr4xlabelBoot | read-only | optional | The value of this object provides the label of the Boot Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.3 | Columndrr4xvalueBoot | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.4 | Columndrr4xstateflagBoot | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.5 | Columndrr4xlabelFlash | read-only | optional | The value of this object provides the label of the Flash Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.6 | Columndrr4xvalueFlash | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.7 | Columndrr4xstateflagFlash | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.8 | Columndrr4xlabelFactoryDataCRC | read-only | optional | The value of this object provides the label of the Factory Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.9 | Columndrr4xvalueFactoryDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.10 | Columndrr4xstateflagFactoryDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.11 | Columndrr4xlabelAlarmDataCrc | read-only | optional | The value of this object provides the label of the Alarm Data Crc parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.12 | Columndrr4xvalueAlarmDataCrc | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.13 | Columndrr4xstateflagAlarmDataCrc | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.14 | Columndrr4xlabelCalibrationDataCrc | read-only | optional | The value of this object provides the label of the Calibration Data Crc parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.15 | Columndrr4xvalueCalibrationDataCrc | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.16 | Columndrr4xstateflagCalibrationDataCrc | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.17 | Columndrr4xlabelHardwareStatus | read-only | optional | The value of this object provides the label of the Module Hardware Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.18 | Columndrr4xvalueHardwareStatus | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.19 | Columndrr4xstateflagHardwareStatus | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.20 | Columndrr4xlabelOpticTripPointStatus | read-only | optional | The value of this object provides the label of the Optical Trip Point Status parameter.It indicates whether the optical power is above(0) or below(1) trip poin… |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.21 | Columndrr4xvalueOpticTripPointStatus | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.22 | Columndrr4xstateflagOpticTripPointStatus | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.23 | Columndrr4xlabelLinkStatus | read-only | optional | The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect t… |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.24 | Columndrr4xvalueLinkStatus | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.14.4.3.25 | Columndrr4xstateflagLinkStatus | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.14.5 | Tablegx2drr4xFactoryTable | not-accessible | mandatory | This table contains gx2drr4x specific factory setting parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.14.5 | NodetrapdrrFanCurrentAlarm | This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.5.4 | Rowgx2drr4xFactoryEntry | not-accessible | mandatory | This list contains Factory setting parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.1 | Columngx2drr4xFactoryTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.2 | Columndrr4xbootControlByte | read-only | mandatory | The value of this object indicates which bank the firmware is currently being boot from. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.3 | Columndrr4xbootStatusByte | read-only | mandatory | This object indicates the status of the last boot |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.4 | Columndrr4xbank1CRC | read-only | mandatory | This object provides the CRC code of bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.5 | Columndrr4xbank2CRC | read-only | mandatory | This object provides the CRC code of bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.6 | Columndrr4xprgEEPROMByte | read-only | mandatory | This object indicates if the EEPROM has been programmed |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.7 | Columndrr4xfactoryCRC | read-only | mandatory | This object provides the CRC code for the Factory data. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.8 | Columndrr4xcalculateCRC | read-only | mandatory | This object indicates which of the Emnums will have the CRC calculated (1-factory, 2-alarm, 3-calibration). |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.9 | Columndrr4xhourMeter | read-only | mandatory | This object provides the hour meter reading of the module. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.10 | Columndrr4xflashPrgCntA | read-only | mandatory | This object provides the number of times Bank 0 flash has been programmed. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.11 | Columndrr4xflashPrgCntB | read-only | mandatory | This object provides the number of times Bank 1 flash has been programmed. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.12 | Columndrr4xflashBankARev | read-only | mandatory | This object provides the revision of flash bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.13 | Columndrr4xflashBankBRev | read-only | mandatory | This object provides the revision of flash bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.14.5.4.14 | Columndrr4xSubAgentRev | read-only | mandatory | This object provides the subagent revision of receiver module. |
| 1.3.6.1.4.1.1166.6.1.2.14.6 | NodetrapdrrFlashAlarm | This trap is issued when the detects an error during Flash memory operations. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.7 | NodetrapdrrBankBootAlarm | This trap is issued when the module detects an error while booting from bank 0 or bank 1. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.8 | NodetrapdrrAlarmDataCRCAlarm | This trap is issued when the Alarm Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.9 | NodetrapdrrHardwareErrAlarm | This trap is issued when hardware is abnormal. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.10 | NodetrapdrrOpticalSignalAlarm | This trap is issued when the optical signal is beyond the preset range. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.11 | NodetrapdrrFactoryDataCRCAlarm | This trap is issued when the Factory Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.12 | NodetrapdrrResetFactoryDefaultAlarm | This trap is issued when the Factory Default Reset occurs. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.13 | NodetrapdrrTripPointAlarm | This trap is issued when the Input optical power is lower than the custumer set trip point and trippoint mode as ALARM_ONLY or SWITCH & ALARM. | ||
| 1.3.6.1.4.1.1166.6.1.2.14.14 | NodetrapdrrLinkAlarm | This trap is issued when receiver is out of SYN with transmitter | ||
| 1.3.6.1.4.1.1166.6.1.2.14.15 | NodetrapdrrCalibrationDataCRCAlarm | This trap is issued when the Calibration Data CRC is incorrect |