OMNI-gx2dualdrr2x-MIB
317 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.35.1 | Nodegx2dualdrr2xDescriptor | |||
| 1.3.6.1.4.1.1166.6.1.2.35.1 | NodetrapdualdrrConfigChangeInteger | This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain curre… | ||
| 1.3.6.1.4.1.1166.6.1.2.35.2 | Tablegx2dualdrr2xAnalogTable | not-accessible | mandatory | This table contains gx2dualdrr2x specific analog parameters with nominal,limits and current values. |
| 1.3.6.1.4.1.1166.6.1.2.35.2 | NodetrapdualdrrConfigChangeDisplayString | This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may … | ||
| 1.3.6.1.4.1.1166.6.1.2.35.2.1 | Rowgx2dualdrr2xAnalogEntry | not-accessible | mandatory | This list contains the analog parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.1 | Columngx2dualdrr2xAnalogTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.2 | Columndualdrr2xlabelRecdOptPwr1 | read-only | optional | The value of this object provides the label of the Channel 1 Received Opt power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.3 | Columndualdrr2xuomRecdOptPwr1 | read-only | optional | The value of this object provides the Unit of Measure of the Channel 1 Received Opt power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.4 | Columndualdrr2xmajorHighRecdOptPwr1 | read-only | obsolete | This object is not used by this module and always returns the value of the Channel 1 Received Opt power Major High Alarm Limit Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.5 | Columndualdrr2xmajorLowRecdOptPwr1 | read-only | obsolete | This object is not used by this module and always returns the value of the Channel 1 Received Opt power Major High Alarm Limit Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.6 | Columndualdrr2xminorHighRecdOptPwr1 | read-only | obsolete | This object is not used by this module and always returns the value of 10^e10 . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.7 | Columndualdrr2xminorLowRecdOptPwr1 | read-only | obsolete | This object is not used by this module and always returns the value of 10^e10 . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.8 | Columndualdrr2xcurrentValueRecdOptPwr1 | read-write | mandatory | The value of this object provides the Current value of the Channel 1 Received Opt power. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.9 | Columndualdrr2xstateFlagRecdOptPwr1 | read-only | mandatory | The value of this object provides the state of the Channel 1 Received Opt power Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.10 | Columndualdrr2xminValueRecdOptPwr1 | read-only | mandatory | The value of this object provides the minimum value of the Channel 1 Received Opt power. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.11 | Columndualdrr2xmaxValueRecdOptPwr1 | read-only | mandatory | The value of this object provides the maximum value of the Channel 1 Received Opt power. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.12 | Columndualdrr2xalarmStateRecdOptPwr1 | read-only | mandatory | The value of this object provides the curent alarm state of the Channel 1 Received Opt power. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.13 | Columndualdrr2xlabelRecdOptPwr2 | read-only | optional | The value of this object provides the label of the Channel 2 Received Opt power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.14 | Columndualdrr2xuomRecdOptPwr2 | read-only | optional | The value of this object provides the Unit of Measure of the Channel 2 Received Opt power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.15 | Columndualdrr2xmajorHighRecdOptPwr2 | read-only | obsolete | This object is not used by this module and always returns the value of the Channel 2 Received Opt power Major High Alarm Limit Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.16 | Columndualdrr2xmajorLowRecdOptPwr2 | read-only | obsolete | This object is not used by this module and always returns the value of the Channel 2 Received Opt power Major High Alarm Limit Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.17 | Columndualdrr2xminorHighRecdOptPwr2 | read-only | obsolete | This object is not used by this module and always returns the value of 10^e10 . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.18 | Columndualdrr2xminorLowRecdOptPwr2 | read-only | obsolete | This object is not used by this module and always returns the value of 10^e10 . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.19 | Columndualdrr2xcurrentValueRecdOptPwr2 | read-write | mandatory | The value of this object provides the Current value of the Channel 2 Received Opt power. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.20 | Columndualdrr2xstateFlagRecdOptPwr2 | read-only | mandatory | The value of this object provides the state of the Channel 2 Received Opt power Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.21 | Columndualdrr2xminValueRecdOptPwr2 | read-only | mandatory | The value of this object provides the minimum value of the Channel 2 Received Opt power. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.22 | Columndualdrr2xmaxValueRecdOptPwr2 | read-only | mandatory | The value of this object provides the maximum value of the Channel 2 Received Opt power. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.23 | Columndualdrr2xalarmStateRecdOptPwr2 | read-only | mandatory | The value of this object provides the curent alarm state of the Channel 2 Received optical power. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.24 | Columndualdrr2xlabelModTemp | read-only | optional | The value of this object provides the label of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.25 | Columndualdrr2xuomModTemp | read-only | optional | The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.26 | Columndualdrr2xmajorHighModTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.27 | Columndualdrr2xmajorLowModTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.28 | Columndualdrr2xminorHighModTemp | read-only | mandatory | The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.29 | Columndualdrr2xminorLowModTemp | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.30 | Columndualdrr2xcurrentValueModTemp | read-only | mandatory | The value of this object provides the Current value of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.31 | Columndualdrr2xstateFlagModTemp | read-only | mandatory | The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.32 | Columndualdrr2xminValueModTemp | read-only | mandatory | The value of this object provides the minimum value the Module Temperature Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.33 | Columndualdrr2xmaxValueModTemp | read-only | mandatory | The value of this object provides the maximum value the Module Temperature Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.34 | Columndualdrr2xalarmStateModTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.35 | Columndualdrr2xlabel12VCurrent | read-only | optional | The value of this object provides the label of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.36 | Columndualdrr2xuom12VCurrent | read-only | optional | The value of this object provides the Unit of Measure of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.37 | Columndualdrr2xmajorHigh12VCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.38 | Columndualdrr2xmajorLow12VCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.39 | Columndualdrr2xminorHigh12VCurrent | read-only | mandatory | The value of this object provides the Minor High alarm value of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.40 | Columndualdrr2xminorLow12VCurrent | read-only | mandatory | The value of this object provides the Minor Low alarm value of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.41 | Columndualdrr2xcurrentValue12VCurrent | read-only | mandatory | The value of this object provides the Current value of the 12v power supply Current parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.42 | Columndualdrr2xstateFlag12VCurrent | read-only | mandatory | The value of this object provides the state of the 12v power supply Current Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.43 | Columndualdrr2xminValue12VCurrent | read-only | mandatory | The value of this object provides the minimum value the 12v power supply Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.44 | Columndualdrr2xmaxValue12VCurrent | read-only | mandatory | The value of this object provides the maximum value the 12v power supply Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.45 | Columndualdrr2xalarmState12VCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the 12v power supply Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.46 | Columndualdrr2xlabelFanSpeed | read-only | optional | The value of this object provides the label of the Fan Speed Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.47 | Columndualdrr2xuomFanSpeed | read-only | optional | The value of this object provides the Unit of Measure of the Fan Speed Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.48 | Columndualdrr2xmajorHighFanSpeed | read-only | mandatory | The value of this object provides the Major High alarm value of the Fan Speed Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.49 | Columndualdrr2xmajorLowFanSpeed | read-only | mandatory | The value of this object provides the Major Low alarm value of the Fan Speed Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.50 | Columndualdrr2xminorHighFanSpeed | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.51 | Columndualdrr2xminorLowFanSpeed | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.52 | Columndualdrr2xcurrentValueFanSpeed | read-only | mandatory | The value of this object provides the current value of the Fan Speed Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.53 | Columndualdrr2xstateFlagFanSpeed | read-only | mandatory | The value of this object provides the state of the Fan Speed Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.54 | Columndualdrr2xminValueFanSpeed | read-only | mandatory | The value of this object provides the minimum value the Fan Speed Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.55 | Columndualdrr2xmaxValueFanSpeed | read-only | mandatory | The value of this object provides the maximum value the Fan Speed Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.56 | Columndualdrr2xalarmStateFanSpeed | read-only | mandatory | The value of this object provides the curent alarm state of the Fan Speed Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.57 | Columndualdrr2xlabelTx0SFPWave | read-only | optional | The value of this object provides the label of the Tx 0 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.58 | Columndualdrr2xuomTx0SFPWave | read-only | optional | The value of this object provides the Unit of Measure of the Tx 0 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.59 | Columndualdrr2xmajorHighTx0SFPWave | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 0 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.60 | Columndualdrr2xmajorLowTx0SFPWave | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 0 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.61 | Columndualdrr2xminorHighTx0SFPWave | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.62 | Columndualdrr2xminorLowTx0SFPWave | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.63 | Columndualdrr2xcurrentValueTx0SFPWave | read-only | mandatory | The value of this object provides the current value of the Tx 0 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.64 | Columndualdrr2xstateFlagTx0SFPWave | read-only | mandatory | The value of this object provides the state of the Tx 0 SFP Wavelength Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.65 | Columndualdrr2xminValueTx0SFPWave | read-only | mandatory | The value of this object provides the minimum value the Tx 0 SFP Wavelength Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.66 | Columndualdrr2xmaxValueTx0SFPWave | read-only | mandatory | The value of this object provides the maximum value the Tx 0 SFP Wavelength Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.67 | Columndualdrr2xalarmStateTx0SFPWave | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 0 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.68 | Columndualdrr2xlabelTx0OptPwr | read-only | optional | The value of this object provides the label of the Tx 0 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.69 | Columndualdrr2xuomTx0OptPwr | read-only | optional | The value of this object provides the Unit of Measure of the Tx 0 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.70 | Columndualdrr2xmajorHighTx0OptPwr | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 0 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.71 | Columndualdrr2xmajorLowTx0OptPwr | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 0 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.72 | Columndualdrr2xminorHighTx0OptPwr | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.73 | Columndualdrr2xminorLowTx0OptPwr | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.74 | Columndualdrr2xcurrentValueTx0OptPwr | read-only | mandatory | The value of this object provides the current value of the Tx 0 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.75 | Columndualdrr2xstateFlagTx0OptPwr | read-only | mandatory | The value of this object provides the state of the Tx 0 Optical Power Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.76 | Columndualdrr2xminValueTx0OptPwr | read-only | mandatory | The value of this object provides the minimum value the Tx 0 Optical Power Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.77 | Columndualdrr2xmaxValueTx0OptPwr | read-only | mandatory | The value of this object provides the maximum value the Tx 0 Optical Power Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.78 | Columndualdrr2xalarmStateTx0OptPwr | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 0 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.79 | Columndualdrr2xlabelTx024vCurr | read-only | optional | The value of this object provides the label of the Tx 0 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.80 | Columndualdrr2xuomTx024vCurr | read-only | optional | The value of this object provides the Unit of Measure of the Tx 0 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.81 | Columndualdrr2xmajorHighTx024vCurr | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 0 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.82 | Columndualdrr2xmajorLowTx024vCurr | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 0 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.83 | Columndualdrr2xminorHighTx024vCurr | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.84 | Columndualdrr2xminorLowTx024vCurr | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.85 | Columndualdrr2xcurrentValueTx024vCurr | read-only | mandatory | The value of this object provides the current value of the Tx 0 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.86 | Columndualdrr2xstateFlagTx024vCurr | read-only | mandatory | The value of this object provides the state of the Tx 0 24 Volt Current Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.87 | Columndualdrr2xminValueTx024vCurr | read-only | mandatory | The value of this object provides the minimum value the Tx 0 24 Volt Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.88 | Columndualdrr2xmaxValueTx024vCurr | read-only | mandatory | The value of this object provides the maximum value the Tx 0 24 Volt Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.89 | Columndualdrr2xalarmStateTx024vCurr | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 0 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.90 | Columndualdrr2xlabelTx024Volt | read-only | optional | The value of this object provides the label of the Tx 0 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.91 | Columndualdrr2xuomTx024Volt | read-only | optional | The value of this object provides the Unit of Measure of the Tx 0 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.92 | Columndualdrr2xmajorHighTx024Volt | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 0 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.93 | Columndualdrr2xmajorLowTx024Volt | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 0 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.94 | Columndualdrr2xminorHighTx024Volt | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.95 | Columndualdrr2xminorLowTx024Volt | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.96 | Columndualdrr2xcurrentValueTx024Volt | read-only | mandatory | The value of this object provides the current value of the Tx 0 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.97 | Columndualdrr2xstateFlagTx024Volt | read-only | mandatory | The value of this object provides the state of the Tx 0 24 Volt supply voltage Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.98 | Columndualdrr2xminValueTx024Volt | read-only | mandatory | The value of this object provides the minimum value the Tx 0 24 Volt supply voltage Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.99 | Columndualdrr2xmaxValueTx024Volt | read-only | mandatory | The value of this object provides the maximum value the Tx 0 24 Volt supply voltage Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.100 | Columndualdrr2xalarmStateTx024Volt | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 0 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.101 | Columndualdrr2xlabelTx0ModTemp | read-only | optional | The value of this object provides the label of the Tx 0 24 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.102 | Columndualdrr2xuomTx0ModTemp | read-only | optional | The value of this object provides the Unit of Measure of the Tx 0 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.103 | Columndualdrr2xmajorHighTx0ModTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 0 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.104 | Columndualdrr2xmajorLowTx0ModTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 0 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.105 | Columndualdrr2xminorHighTx0ModTemp | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.106 | Columndualdrr2xminorLowTx0ModTemp | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.107 | Columndualdrr2xcurrentValueTx0ModTemp | read-only | mandatory | The value of this object provides the current value of the Tx 0 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.108 | Columndualdrr2xstateFlagTx0ModTemp | read-only | mandatory | The value of this object provides the state of the Tx 0 Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.109 | Columndualdrr2xminValueTx0ModTemp | read-only | mandatory | The value of this object provides the minimum value the Tx 0 Module Temperature Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.110 | Columndualdrr2xmaxValueTx0ModTemp | read-only | mandatory | The value of this object provides the maximum value the Tx 0 Module Temperature Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.111 | Columndualdrr2xalarmStateTx0ModTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 0 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.112 | Columndualdrr2xlabelTx1SFPWave | read-only | optional | The value of this object provides the label of the Tx 1 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.113 | Columndualdrr2xuomTx1SFPWave | read-only | optional | The value of this object provides the Unit of Measure of the Tx 1 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.114 | Columndualdrr2xmajorHighTx1SFPWave | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 1 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.115 | Columndualdrr2xmajorLowTx1SFPWave | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 1 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.116 | Columndualdrr2xminorHighTx1SFPWave | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.117 | Columndualdrr2xminorLowTx1SFPWave | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.118 | Columndualdrr2xcurrentValueTx1SFPWave | read-only | mandatory | The value of this object provides the current value of the Tx 1 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.119 | Columndualdrr2xstateFlagTx1SFPWave | read-only | mandatory | The value of this object provides the state of the Tx 1 SFP Wavelength Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.120 | Columndualdrr2xminValueTx1SFPWave | read-only | mandatory | The value of this object provides the minimum value the Tx 1 SFP Wavelength Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.121 | Columndualdrr2xmaxValueTx1SFPWave | read-only | mandatory | The value of this object provides the maximum value the Tx 1 SFP Wavelength Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.122 | Columndualdrr2xalarmStateTx1SFPWave | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 1 SFP Wavelength Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.123 | Columndualdrr2xlabelTx1OptPwr | read-only | optional | The value of this object provides the label of the Tx 1 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.124 | Columndualdrr2xuomTx1OptPwr | read-only | optional | The value of this object provides the Unit of Measure of the Tx 1 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.125 | Columndualdrr2xmajorHighTx1OptPwr | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 1 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.126 | Columndualdrr2xmajorLowTx1OptPwr | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 1 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.127 | Columndualdrr2xminorHighTx1OptPwr | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.128 | Columndualdrr2xminorLowTx1OptPwr | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.129 | Columndualdrr2xcurrentValueTx1OptPwr | read-only | mandatory | The value of this object provides the current value of the Tx 1 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.130 | Columndualdrr2xstateFlagTx1OptPwr | read-only | mandatory | The value of this object provides the state of the Tx 1 Optical Power Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.131 | Columndualdrr2xminValueTx1OptPwr | read-only | mandatory | The value of this object provides the minimum value the Tx 1 Optical Power Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.132 | Columndualdrr2xmaxValueTx1OptPwr | read-only | mandatory | The value of this object provides the maximum value the Tx 1 Optical Power Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.133 | Columndualdrr2xalarmStateTx1OptPwr | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 1 Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.134 | Columndualdrr2xlabelTx124vCurr | read-only | optional | The value of this object provides the label of the Tx 1 24 VoltCurrent Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.135 | Columndualdrr2xuomTx124vCurr | read-only | optional | The value of this object provides the Unit of Measure of the Tx 1 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.136 | Columndualdrr2xmajorHighTx124vCurr | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 1 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.137 | Columndualdrr2xmajorLowTx124vCurr | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 1 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.138 | Columndualdrr2xminorHighTx124vCurr | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.139 | Columndualdrr2xminorLowTx124vCurr | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.140 | Columndualdrr2xcurrentValueTx124vCurr | read-only | mandatory | The value of this object provides the current value of the Tx 1 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.141 | Columndualdrr2xstateFlagTx124vCurr | read-only | mandatory | The value of this object provides the state of the Tx 1 24 Volt Current Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.142 | Columndualdrr2xminValueTx124vCurr | read-only | mandatory | The value of this object provides the minimum value the Tx 1 24 Volt Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.143 | Columndualdrr2xmaxValueTx124vCurr | read-only | mandatory | The value of this object provides the maximum value the Tx 1 24 Volt Current Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.144 | Columndualdrr2xalarmStateTx124vCurr | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 1 24 Volt Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.145 | Columndualdrr2xlabelTx124Volt | read-only | optional | The value of this object provides the label of the Tx 1 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.146 | Columndualdrr2xuomTx124Volt | read-only | optional | The value of this object provides the Unit of Measure of the Tx 1 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.147 | Columndualdrr2xmajorHighTx124Volt | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 1 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.148 | Columndualdrr2xmajorLowTx124Volt | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 1 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.149 | Columndualdrr2xminorHighTx124Volt | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.150 | Columndualdrr2xminorLowTx124Volt | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.151 | Columndualdrr2xcurrentValueTx124Volt | read-only | mandatory | The value of this object provides the current value of the Tx 1 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.152 | Columndualdrr2xstateFlagTx124Volt | read-only | mandatory | The value of this object provides the state of the Tx 1 24 Volt supply voltage Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.153 | Columndualdrr2xminValueTx124Volt | read-only | mandatory | The value of this object provides the minimum value the Tx 1 24 Volt supply voltage Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.154 | Columndualdrr2xmaxValueTx124Volt | read-only | mandatory | The value of this object provides the maximum value the Tx 1 24 Volt supply voltage Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.155 | Columndualdrr2xalarmStateTx124Volt | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 1 24 Volt supply voltage Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.156 | Columndualdrr2xlabelTx1ModTemp | read-only | optional | The value of this object provides the label of the Tx 1 24 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.157 | Columndualdrr2xuomTx1ModTemp | read-only | optional | The value of this object provides the Unit of Measure of the Tx 1 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.158 | Columndualdrr2xmajorHighTx1ModTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Tx 1 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.159 | Columndualdrr2xmajorLowTx1ModTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Tx 1 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.160 | Columndualdrr2xminorHighTx1ModTemp | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.161 | Columndualdrr2xminorLowTx1ModTemp | read-only | obsolete | This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.162 | Columndualdrr2xcurrentValueTx1ModTemp | read-only | mandatory | The value of this object provides the current value of the Tx 1 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.163 | Columndualdrr2xstateFlagTx1ModTemp | read-only | mandatory | The value of this object provides the state of the Tx 1 Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.164 | Columndualdrr2xminValueTx1ModTemp | read-only | mandatory | The value of this object provides the minimum value the Tx 1 Module Temperature Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.165 | Columndualdrr2xmaxValueTx1ModTemp | read-only | mandatory | The value of this object provides the maximum value the Tx 1 Module Temperature Analog parameter can achive. |
| 1.3.6.1.4.1.1166.6.1.2.35.2.1.166 | Columndualdrr2xalarmStateTx1ModTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Tx 1 Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3 | Tablegx2dualdrr2xDigitalTable | not-accessible | mandatory | This table contains gx2dualdrr2x specific digital parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.35.3 | Nodetrapdualdrr12VCurrentAlarm | This trap is issued when the 12V power supply Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this para… | ||
| 1.3.6.1.4.1.1166.6.1.2.35.3.2 | Rowgx2dualdrr2xDigitalEntry | not-accessible | mandatory | This list contains individual digital parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.1 | Columngx2dualdrr2xDigitalTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.2 | Columndualdrr2xlabelTrippoint1Value | read-only | optional | The value of this object provides the label of the Trip point Value Digital parameter. The trip point Value defines the RF switch point based on the optical po… |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.3 | Columndualdrr2xenumTrippoint1Value | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.4 | Columndualdrr2xvalueTrippoint1Value | read-write | mandatory | The value of this object reflects the setting of the threshold at which the Trip point activates. It is in 1 dB increments ranging from -25 to -5 dB. The user … |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.5 | Columndualdrr2xstateflagTrippoint1Value | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.6 | Columndualdrr2xlabelTrippoint1Mode | read-only | optional | The value of this object provides the label of the Trip point mode Digital parameter. The trip point mode defines the RF switch action based on the optical pow… |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.7 | Columndualdrr2xenumTrippoint1Mode | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.8 | Columndualdrr2xvalueTrippoint1Mode | read-write | mandatory | The value of this object is the current value of trip point mode. There are three possible value: 1-off, 2-alarm_only, 3-alarm&switch. If module input optical … |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.9 | Columndualdrr2xstateflagTrippoint1Mode | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.10 | Columndualdrr2xlabelTrippoint2Value | read-only | optional | The value of this object provides the label of the Trip point Value Digital parameter. The trip point Value defines the RF switch point based on the optical po… |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.11 | Columndualdrr2xenumTrippoint2Value | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.12 | Columndualdrr2xvalueTrippoint2Value | read-write | mandatory | The value of this object reflects the setting of the threshold at which the Trip point activates. It is in 1 dB increments ranging from -25 to -5 dB. The user … |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.13 | Columndualdrr2xstateflagTrippoint2Value | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.14 | Columndualdrr2xlabelTrippoint2Mode | read-only | optional | The value of this object provides the label of the Trip point mode Digital parameter. The trip point mode defines the RF switch action based on the optical pow… |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.15 | Columndualdrr2xenumTrippoint2Mode | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.16 | Columndualdrr2xvalueTrippoint2Mode | read-write | mandatory | The value of this object is the current value of trip point mode. There are three possible value: 1-off, 2-alarm_only, 3-alarm&switch. If module input optical … |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.17 | Columndualdrr2xstateflagTrippoint2Mode | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.18 | Columndualdrr2xlabelGainChannel1A | read-only | optional | The value of this object provides the label of the RF Channel 1A Gain Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.19 | Columndualdrr2xenumGainChannel1A | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.20 | Columndualdrr2xvalueGainChannel1A | read-write | mandatory | The value of this object reflects the setting of the gain for RF Channel 1A. It is in 1 dB increments ranging from 0 to 20dB. The user can enter a number from … |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.21 | Columndualdrr2xstateflagGainChannel1A | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.22 | Columndualdrr2xlabelGainChannel1B | read-only | optional | The value of this object provides the label of the RF Channel 1B Gain Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.23 | Columndualdrr2xenumGainChannel1B | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.24 | Columndualdrr2xvalueGainChannel1B | read-write | mandatory | The value of this object reflects the setting of the gain for RF Channel 1B. It is in 1 dB increments ranging from 0 to 20dB. The user can enter a number from … |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.25 | Columndualdrr2xstateflagGainChannel1B | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.26 | Columndualdrr2xlabelGainChannel2A | read-only | optional | The value of this object provides the label of the RF Channel 2A Gain Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.27 | Columndualdrr2xenumGainChannel2A | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.28 | Columndualdrr2xvalueGainChannel2A | read-write | mandatory | The value of this object reflects the setting of the gain for RF Channel 2A. It is in 1 dB increments ranging from 0 to 20dB. The user can enter a number from … |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.29 | Columndualdrr2xstateflagGainChannel2A | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.30 | Columndualdrr2xlabelGainChannel2B | read-only | optional | The value of this object provides the label of the RF Channel 2B Gain Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.31 | Columndualdrr2xenumGainChannel2B | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.32 | Columndualdrr2xvalueGainChannel2B | read-write | mandatory | The value of this object reflects the setting of the gain for RF Channel 2B. It is in 1 dB increments ranging from 0 to 20dB. The user can enter a number from … |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.33 | Columndualdrr2xstateflagGainChannel2B | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.34 | Columndualdrr2xlabelTestpointSelect | read-only | optional | The value of this object provides the label of the Module's test point select Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.35 | Columndualdrr2xenumTestpointSelect | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.36 | Columndualdrr2xvalueTestpointSelect | read-write | mandatory | The value of this object reflects the setting of the test point selector for The Module. The user can enter a number from 1 to 4 |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.37 | Columndualdrr2xstateflagTestpointSelect | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.38 | Columndualdrr2xlabelOpFrequency | read-only | optional | The value of this object provides the label of the Module's active channels Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.39 | Columndualdrr2xenumOpFrequency | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.40 | Columndualdrr2xvalueOpFrequency | read-write | mandatory | The value of this object reflects which channels are active for The Module. The user can enter a number from 1 to 4 |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.41 | Columndualdrr2xstateflagOpFrequency | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.42 | Columndualdrr2xlabelActChanSelect | read-only | optional | The value of this object provides the label of the Module's active channels Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.43 | Columndualdrr2xenumActChanSelect | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.44 | Columndualdrr2xvalueActChanSelect | read-write | mandatory | The value of this object reflects which channels are active for The Module. The user can enter a number from 1 to 4 |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.45 | Columndualdrr2xstateflagActChanSelect | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.46 | Columndualdrr2xlabelFactoryDefaultReset | read-only | optional | The value of this object provides the label of the Factory Default Reset Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.47 | Columndualdrr2xenumFactoryDefaultReset | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.48 | Columndualdrr2xvalueFactoryDefaultReset | read-write | mandatory | The read of this value will return a invalid value. The read will not reflect the actual setting value for this parameter |
| 1.3.6.1.4.1.1166.6.1.2.35.3.2.49 | Columndualdrr2xstateflagFactoryDefaultReset | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4 | Tablegx2dualdrr2xStatusTable | not-accessible | mandatory | This table contains gx2dualdrr2x specific status parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.35.4 | NodetrapdualdrrModuleTempAlarm | This trap is issued when the Internal Module Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.4.3 | Rowgx2dualdrr2xStatusEntry | not-accessible | mandatory | This list contains Status parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.1 | Columngx2dualdrr2xStatusTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.2 | Columndualdrr2xlabelBoot | read-only | optional | The value of this object provides the label of the Boot Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.3 | Columndualdrr2xvalueBoot | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.4 | Columndualdrr2xstateflagBoot | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.5 | Columndualdrr2xlabelFlash | read-only | optional | The value of this object provides the label of the Flash Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.6 | Columndualdrr2xvalueFlash | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.7 | Columndualdrr2xstateflagFlash | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.8 | Columndualdrr2xlabelFactoryDataCRC | read-only | optional | The value of this object provides the label of the Factory Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.9 | Columndualdrr2xvalueFactoryDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.10 | Columndualdrr2xstateflagFactoryDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.11 | Columndualdrr2xlabelAlarmDataCrc | read-only | optional | The value of this object provides the label of the Alarm Data Crc parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.12 | Columndualdrr2xvalueAlarmDataCrc | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.13 | Columndualdrr2xstateflagAlarmDataCrc | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.14 | Columndualdrr2xlabelCalibrationDataCrc | read-only | optional | The value of this object provides the label of the Calibration Data Crc parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.15 | Columndualdrr2xvalueCalibrationDataCrc | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.16 | Columndualdrr2xstateflagCalibrationDataCrc | read-only | mandatory | The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.17 | Columndualdrr2xlabelHardwareStatus | read-only | optional | The value of this object provides the label of the Module Hardware Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.18 | Columndualdrr2xvalueHardwareStatus | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.19 | Columndualdrr2xstateflagHardwareStatus | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.20 | Columndualdrr2xlabelCh1TripPointStatus | read-only | optional | The value of this object provides the label of the Optical Trip Point Status parameter.It indicates whether the optical power is above(0) or below(1) trip poin… |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.21 | Columndualdrr2xvalueCh1TripPointStatus | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.22 | Columndualdrr2xstateflagCh1TripPointStatus | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.23 | Columndualdrr2xlabelLink1Status | read-only | optional | The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect t… |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.24 | Columndualdrr2xvalueLink1Status | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.25 | Columndualdrr2xstateflagLink1Status | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.26 | Columndualdrr2xlabelCh2TripPointStatus | read-only | optional | The value of this object provides the label of the Optical Trip Point Status parameter.It indicates whether the optical power is above(0) or below(1) trip poin… |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.27 | Columndualdrr2xvalueCh2TripPointStatus | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.28 | Columndualdrr2xstateflagCh2TripPointStatus | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.29 | Columndualdrr2xlabelLink2Status | read-only | optional | The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect t… |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.30 | Columndualdrr2xvalueLink2Status | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.31 | Columndualdrr2xstateflagLink2Status | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.32 | Columndualdrr2xlabelDRT1Status | read-only | optional | The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect t… |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.33 | Columndualdrr2xvalueDRT1Status | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.34 | Columndualdrr2xstateflagDRT1Status | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.35 | Columndualdrr2xlabelSFP0Status | read-only | optional | The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect t… |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.36 | Columndualdrr2xvalueSFP0Status | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.37 | Columndualdrr2xstateflagSFP0Status | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.38 | Columndualdrr2xlabelDRT2Status | read-only | optional | The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect t… |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.39 | Columndualdrr2xvalueDRT2Status | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.40 | Columndualdrr2xstateflagDRT2Status | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.41 | Columndualdrr2xlabelSFP1Status | read-only | optional | The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect t… |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.42 | Columndualdrr2xvalueSFP1Status | read-only | mandatory | The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.35.4.3.43 | Columndualdrr2xstateflagSFP1Status | read-only | mandatory | The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.35.5 | Tablegx2dualdrr2xFactoryTable | not-accessible | mandatory | This table contains gx2dualdrr2x specific factory setting parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.35.5 | NodetrapdualdrrFanSpeedAlarm | This trap is issued when the Fan Speed parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.5.4 | Rowgx2dualdrr2xFactoryEntry | not-accessible | mandatory | This list contains Factory setting parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.1 | Columngx2dualdrr2xFactoryTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.2 | Columndualdrr2xbootControlByte | read-only | mandatory | The value of this object indicates which bank the firmware is currently being boot from. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.3 | Columndualdrr2xbootStatusByte | read-only | mandatory | This object indicates the status of the last boot |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.4 | Columndualdrr2xbank1CRC | read-only | mandatory | This object provides the CRC code of bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.5 | Columndualdrr2xbank2CRC | read-only | mandatory | This object provides the CRC code of bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.6 | Columndualdrr2xprgEEPROMByte | read-only | mandatory | This object indicates if the EEPROM has been programmed |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.7 | Columndualdrr2xfactoryCRC | read-only | mandatory | This object provides the CRC code for the Factory data. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.8 | Columndualdrr2xcalculateCRC | read-only | mandatory | This object indicates which of the Emnums will have the CRC calculated (1-factory, 2-alarm, 3-calibration). |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.9 | Columndualdrr2xhourMeter | read-only | mandatory | This object provides the hour meter reading of the module. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.10 | Columndualdrr2xflashPrgCntA | read-only | mandatory | This object provides the number of times Bank 0 flash has been programmed. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.11 | Columndualdrr2xflashPrgCntB | read-only | mandatory | This object provides the number of times Bank 1 flash has been programmed. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.12 | Columndualdrr2xflashBankARev | read-only | mandatory | This object provides the revision of flash bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.13 | Columndualdrr2xflashBankBRev | read-only | mandatory | This object provides the revision of flash bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.14 | Columndualdrr2xSubAgentRev | read-only | mandatory | This object provides the subagent revision of receiver module. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.15 | Columndualdrr2xFPGA0FwRev | read-only | mandatory | This object provides the Firmware revision of the first DRR FPGA. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.16 | Columndualdrr2xFPGA1FwRev | read-only | mandatory | This object provides the Firmware revision of the second DRR FPGA. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.17 | Columndualdrr2xDRT1SerialNo | read-only | mandatory | This object provides the Serial Number of the DRT attached to channel 1. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.18 | Columndualdrr2xDRT1SFPSerialNo | read-only | mandatory | This object provides the Serial Number of the SFP in the DRT attached to channel 1. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.19 | Columndualdrr2xDRT1SFPPartNo | read-only | mandatory | This object provides the Part number of the SFP in the DRT attached to channel 1. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.20 | Columndualdrr2xDRT1FwRev | read-only | mandatory | This object provides the Firmware revision of the DRT attached to channel 1. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.21 | Columndualdrr2xDRT1FpgaFwRev | read-only | mandatory | This object provides the Firmware revision of the FPGA in the DRT attached to channel 1. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.22 | Columndualdrr2xDRT2SerialNo | read-only | mandatory | This object provides the Serial Number of the DRT attached to channel 2 |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.23 | Columndualdrr2xDRT2SFPSerialNo | read-only | mandatory | This object provides the Serial Number of the SFP in the DRT attached to channel 2 |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.24 | Columndualdrr2xDRT2SFPPartNo | read-only | mandatory | This object provides the Part number of the SFP in the DRT attached to channel 2. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.25 | Columndualdrr2xDRT2FwRev | read-only | mandatory | This object provides the Firmware revision of the DRT attached to channel 2. |
| 1.3.6.1.4.1.1166.6.1.2.35.5.4.26 | Columndualdrr2xDRT2FpgaFwRev | read-only | mandatory | This object provides the Firmware revision of the FPGA in the DRT attached to channel 2. |
| 1.3.6.1.4.1.1166.6.1.2.35.6 | NodetrapdualdrrFlashAlarm | This trap is issued when the detects an error during Flash memory operations. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.7 | NodetrapdualdrrBankBootAlarm | This trap is issued when the module detects an error while booting from bank 0 or bank 1. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.8 | NodetrapdualdrrAlarmDataCRCAlarm | This trap is issued when the Alarm Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.9 | NodetrapdualdrrHardwareErrAlarm | This trap is issued when hardware is abnormal. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.10 | NodetrapdualdrrOpticalSignal1Alarm | This trap is issued when the optical signal 1 is beyond the preset range. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.11 | NodetrapdualdrrOpticalSignal2Alarm | This trap is issued when the optical signal 2 is beyond the preset range. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.12 | NodetrapdualdrrFactoryDataCRCAlarm | This trap is issued when the Factory Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.13 | NodetrapdualdrrResetFactoryDefaultAlarm | This trap is issued when the Factory Default Reset occurs. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.14 | NodetrapdualdrrTripPoint1Alarm | This trap is issued when the Input 1 optical power is lower than the custumer set trip point and trippoint mode as ALARM_ONLY or SWITCH & ALARM. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.15 | NodetrapdualdrrTripPoint2Alarm | This trap is issued when the Input 2 optical power is lower than the custumer set trip point and trippoint mode as ALARM_ONLY or SWITCH & ALARM. | ||
| 1.3.6.1.4.1.1166.6.1.2.35.16 | NodetrapdualdrrLink1Alarm | This trap is issued when receiver 1 is out of SYN with transmitter | ||
| 1.3.6.1.4.1.1166.6.1.2.35.17 | NodetrapdualdrrLink2Alarm | This trap is issued when receiver 2 is out of SYN with transmitter | ||
| 1.3.6.1.4.1.1166.6.1.2.35.18 | NodetrapdualdrrCalibrationDataCRCAlarm | This trap is issued when the Calibration Data CRC is incorrect | ||
| 1.3.6.1.4.1.1166.6.1.2.35.19 | NodetrapdualdrrSFP1OptPWRAlarm | This trap is issued when SFP 1's optical power is incorrect | ||
| 1.3.6.1.4.1.1166.6.1.2.35.20 | NodetrapdualdrrDRT1Cur24VAlarm | This trap is issued when DRT 1's 24 volt current is incorrect | ||
| 1.3.6.1.4.1.1166.6.1.2.35.21 | NodetrapdualdrrDRT1ModTempAarm | This trap is issued when DRT 1's Module telperature is incorrect | ||
| 1.3.6.1.4.1.1166.6.1.2.35.22 | NodetrapdualdrrSFP2OptPWRAlarm | This trap is issued when SFP 2's optical power is incorrect | ||
| 1.3.6.1.4.1.1166.6.1.2.35.23 | NodetrapdualdrrDRT2Cur24VAlarm | This trap is issued when DRT 2's 24 volt current is incorrect | ||
| 1.3.6.1.4.1.1166.6.1.2.35.24 | NodetrapdualdrrDRT2ModTempAarm | This trap is issued when DRT 2's Module telperature is incorrect |