OPS-MIB
86 objects
This is the MIB module for OPS-compliant CPE for managing configurations of the CPE system and its voice services.
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | experimental Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.1 | IdentityopsMIB | This is the MIB module for OPS-compliant CPE for managing configurations of the CPE system and its voice services. | ||
| 1.3.6.1.3.1.1 | NodeopsMIBObjects | |||
| 1.3.6.1.3.1.1.1 | NodeiadOPS | |||
| 1.3.6.1.3.1.1.1.1 | NodeiOpsIADConfig | |||
| 1.3.6.1.3.1.1.1.1.1 | ScalariOpsIADIfIndex | read-only | current | Index of the interface that the IAD uses to communicate with the Multi-Service Access Concentrator (MAS). |
| 1.3.6.1.3.1.1.1.1.2 | ScalariOpsIADManufacturerName | read-only | current | Name and contact information of the manufacturer of the IAD. |
| 1.3.6.1.3.1.1.1.1.3 | ScalariOpsIADSerialNumber | read-only | current | Serial number of the IAD. |
| 1.3.6.1.3.1.1.1.1.4 | ScalariOpsIADCLEICode | read-only | current | Common Language Equipment Identifier Code of the IAD. |
| 1.3.6.1.3.1.1.1.1.5 | ScalariOpsIADAdminStatus | read-write | current | Identifies the administrative status of the IAD. |
| 1.3.6.1.3.1.1.1.1.6 | ScalariOpsIADOperStatus | read-only | current | Identifies the operational status of the IAD. |
| 1.3.6.1.3.1.1.1.1.7 | ScalariOpsIADAlarmStatus | read-only | current | Identifies the current alarm status of the IAD. If multiple alarms are present, this object displays the highest severity alarm value. |
| 1.3.6.1.3.1.1.1.1.8 | ScalariOpsIADOperStatusLastChange | read-only | current | The value of the SNMPv2 MIBs 'sysUpTime' object-type at the time the IAD entered its current operating state. If the IADs current state was entered prior to th… |
| 1.3.6.1.3.1.1.1.1.9 | ScalariOpsIADResetIAD | read-write | current | Reboot the IAD. The IAD will boot up running the system image file specified in the 'iOpsIADSoftwareFileName' object-type. It is highly recommended that the IA… |
| 1.3.6.1.3.1.1.1.1.10 | ScalariOpsIADSoftwareFileName | read-write | current | Contains the name of the system image file that the IAD will attempt to boot from. If IAD does not support multiple system image files, then this object become… |
| 1.3.6.1.3.1.1.1.1.11 | ScalariOpsIADSoftwareUpgradeFileName | read-write | current | Contains the name of the system image file to be downloaded to the IAD. The full path name of the file must be specified. The IP address of the server used to … |
| 1.3.6.1.3.1.1.1.1.12 | ScalariOpsIADDownloadSoftware | read-write | current | Is used to download the system image file to the IAD or to obtain status about the file download: 1) The SNMP SET PDU message is used to initiate a download of… |
| 1.3.6.1.3.1.1.1.1.13 | ScalariOpsIADSaveSoftware | read-write | current | Save downloaded system image file with the option to reboot the IAD. For IADs that can contain multiple system image files, either option can be used. For IADs… |
| 1.3.6.1.3.1.1.1.1.14 | ScalariOpsIADSoftwareVersion | read-only | current | Version number of the currently running system image. |
| 1.3.6.1.3.1.1.1.1.15 | ScalariOpsIADReConfigIAD | read-write | current | Change the current configuration file (persistent database) running on the IAD to a new configuration file specified in the 'iOpsIADConfigFileName' object-type. |
| 1.3.6.1.3.1.1.1.1.16 | ScalariOpsIADConfigFileName | read-write | current | Contains the configuration file name that the IAD will attempt to load. If the IAD does not support multiple configuration files, then this object becomes read… |
| 1.3.6.1.3.1.1.1.1.17 | ScalariOpsIADConfigUpgradeFileName | read-write | current | Contains the name of the configuration file to be downloaded to the IAD. The full path name of the file must be specified. The IP address of the server used to… |
| 1.3.6.1.3.1.1.1.1.18 | ScalariOpsIADUpDownloadConfiguration | read-write | current | Is used to download the configuration file to the IAD, or to upload the configuration from the IAD, or to obtain status about the file download or upload: 1) T… |
| 1.3.6.1.3.1.1.1.1.19 | ScalariOpsIADSaveConfiguration | read-write | current | Save the downloaded configuration file, but continue to use the currently running configuration file or start using the newly downloaded configuration file. Fo… |
| 1.3.6.1.3.1.1.1.1.20 | ScalariOpsIADVersionConfig | read-only | current | Version of Configuration. |
| 1.3.6.1.3.1.1.1.1.21 | ScalariOpsIADMgmtChType | read-only | current | Specifies the type of management channel to be used, where: 1) 'andaFDL' is the ANDA facility data link channel 2) 'dso' is a DS0 channel 3) 'fr-dlci' is a Fra… |
| 1.3.6.1.3.1.1.1.1.22 | ScalariOpsIADMgmtChNumber | read-write | current | This field is set according the value specified in the 'iOpsIADMgmtChType' object-type: If 'iOpsIADMgmtChType' is 'andaFDL(1)' - this object is not applicable.… |
| 1.3.6.1.3.1.1.1.1.23 | ScalariOpsIADMgmtChBandwidth | read-write | current | This object is only valid when 'iOpsIADMgmtChType' is 'fr-dlci(3)' or 'atmVPIVCI(4)'. This object indicates the amount of bandwidth that is allocated for the m… |
| 1.3.6.1.3.1.1.1.1.24 | ScalariOpsIADMgmtChInactivityTimer | read-write | current | Amount of time of inactivity allowed on a management channel before the link is declared down. The MAS should poll IAD on a keep-alive timer. |
| 1.3.6.1.3.1.1.1.1.25 | ScalariOpsIADDataService | read-only | current | Indicates the type of data service offered by the IAD: '1' is Frame Relay '2' is ATM '3' is PPP |
| 1.3.6.1.3.1.1.1.1.26 | ScalariOpsIADDateAndTime | read-write | current | Is the date and time on the IAD. |
| 1.3.6.1.3.1.1.1.1.27 | ScalariOpsIADMacAddress | read-only | current | Is the MAC address on the IAD. |
| 1.3.6.1.3.1.1.1.1.28 | ScalariOpsIADPublicIPAddress | read-write | current | Is the IP address on the IAD. |
| 1.3.6.1.3.1.1.1.1.29 | ScalariOpsIADSubnetMask | read-write | current | Is the subnet mask on the IAD. |
| 1.3.6.1.3.1.1.1.1.30 | ScalariOpsIADGateway | read-write | current | Is the Gateway IP address. |
| 1.3.6.1.3.1.1.1.1.31 | ScalariOpsIADDHCPIP | read-write | current | If used, is the IP address of the DHCP server. |
| 1.3.6.1.3.1.1.1.1.32 | ScalariOpsIADServerIP | read-write | current | Is the IP address of the server used for the system image file downloads, for the downloads and uploads of the configuration file (persistent database) and for… |
| 1.3.6.1.3.1.1.1.1.33 | ScalariOpsIADServerType | read-write | current | Indicates the type of file transfer to be used. TFTP is the default and will be used unless another selection is specified. |
| 1.3.6.1.3.1.1.1.1.34 | ScalariOpsIADServerLoginName | read-write | current | Is the Login Name of the Server. |
| 1.3.6.1.3.1.1.1.1.35 | ScalariOpsIADServerPasswd | accessible-for-notify | current | Is the password used to login to the Server. It may be encrypted. This value is write only. |
| 1.3.6.1.3.1.1.1.1.36 | ScalariOpsIADMasPublicKey | read-write | current | Is the public key of the MAS which, when combined with the private key stored on the IAD, can be used to encrypt and decrypt the community name in an SNMP PDU. |
| 1.3.6.1.3.1.1.1.1.37 | ScalariOpsIADManagementPasswd | accessible-for-notify | current | Is the password assigned to an IAD to be used by a directly connected management station to login to the IAD. This value is write only. |
| 1.3.6.1.3.1.1.1.2 | NodeiOpsIADVoiceService | |||
| 1.3.6.1.3.1.1.1.2.1 | ScalariOpsIADVlNumber | read-only | current | Indicates the number of voice lines on the IAD. |
| 1.3.6.1.3.1.1.1.2.2 | TableiOpsIADVlTable | not-accessible | current | Is a list of the voice line entries. The number of entries is indicated by the value of the 'iOpsIADVlNumber' object-type. |
| 1.3.6.1.3.1.1.1.2.2.1 | RowiOpsIADVlEntry | not-accessible | current | Is an entry that contains the objects pertaining to a voice line uniquely identified by the 'iOpsIADVlIndex' object-type. |
| 1.3.6.1.3.1.1.1.2.2.1.1 | ColumniOpsIADVlIndex | not-accessible | current | Is the index of the voice line. |
| 1.3.6.1.3.1.1.1.2.2.1.2 | ColumniOpsIADVlDS1IfIndex | read-create | current | Is the associated DS1 interface index, if the IAD has one or more DS1s. The value of this object is zero (0), if there are no DS1s local to the IAD. |
| 1.3.6.1.3.1.1.1.2.2.1.3 | ColumniOpsIADVlDS0Index | read-create | current | Is the DS0 index within the DS1, or, the index of the individual POTS line |
| 1.3.6.1.3.1.1.1.2.2.1.4 | ColumniOpsIADVlOperStatus | read-only | current | Indicates the operating status of the voice line. Is one of the following: 'up-InService' - The line is in service 'down-OutOfService' - The line is out of ser… |
| 1.3.6.1.3.1.1.1.2.2.1.5 | ColumniOpsIADVlSecondaryServiceState | read-only | current | This indicates any current alarm on the voice line. |
| 1.3.6.1.3.1.1.1.2.2.1.6 | ColumniOpsIADVlAdminStatus | read-create | current | This identifies the desired administrative status of the voice line. It is one of the following values: 'up-restore' - activate or restore the voice service 'd… |
| 1.3.6.1.3.1.1.1.2.2.1.7 | ColumniOpsIADVlOperStatusLastChange | read-only | current | The value of the SNMPv2 MIBs 'sysUpTime' object-type at the time this voice line entered its current operating status state. If the current state of the voice … |
| 1.3.6.1.3.1.1.1.2.2.1.8 | ColumniOpsIADVlLoopbackTestResult | read-only | current | Indicates the results of the loopback test that was initiated by the 'iOpsIADVlAdminStatus' object-type. |
| 1.3.6.1.3.1.1.1.2.2.1.9 | ColumniOpsIADVlNumberOfWires | read-only | current | Indicates the number of wires on the line. |
| 1.3.6.1.3.1.1.1.2.2.1.10 | ColumniOpsIADVlSignalFunctionCode | read-create | current | Is the Generic Signal Function code for the voice line. The default value is 'fxsLoopStart'. |
| 1.3.6.1.3.1.1.1.2.2.1.11 | ColumniOpsIADVlRobbedBitMode | read-create | current | Is the Robbed Bit Signal mode for the voice line. The default value is 'abcd'. |
| 1.3.6.1.3.1.1.1.2.2.1.12 | ColumniOpsIADVlCallReferenceValue | read-create | current | Indicates the Call Reference Value (CRV). |
| 1.3.6.1.3.1.1.1.2.2.1.13 | ColumniOpsIADVlRingingCadence | read-create | current | Indicates the ring cadence. |
| 1.3.6.1.3.1.1.1.2.2.1.14 | ColumniOpsIADVlVoiceProtocolType | read-create | current | Indicates the type of voice protocol that will be used. |
| 1.3.6.1.3.1.1.1.2.2.1.15 | ColumniOpsIADVlPhoneNumber | read-create | current | Indicates the telephone number of the voice line. |
| 1.3.6.1.3.1.1.1.2.2.1.16 | ColumniOpsIADVlTransmitImpedance | read-create | current | Indicates the Transmit Impedance. |
| 1.3.6.1.3.1.1.1.2.2.1.17 | ColumniOpsIADVlReceiveImpedance | read-create | current | Indicates the Receive Impedance. |
| 1.3.6.1.3.1.1.1.2.2.1.18 | ColumniOpsIADVlTransmitLoss | read-create | current | Indicates the Transmit Loss. |
| 1.3.6.1.3.1.1.1.2.2.1.19 | ColumniOpsIADVlReceiveLoss | read-create | current | Indicates the Receive Loss |
| 1.3.6.1.3.1.1.1.2.2.1.20 | ColumniOpsIADVlPayloadType | read-create | current | Indicates the Payload type. |
| 1.3.6.1.3.1.1.1.2.2.1.21 | ColumniOpsIADVlEchoCancellation | read-create | current | Indicates if Echo Cancellation is ON or OFF. |
| 1.3.6.1.3.1.1.1.2.2.1.22 | ColumniOpsIADVlEchoDelay | read-create | current | Indicates the length of the Echo Delay in milliseconds. |
| 1.3.6.1.3.1.1.1.2.2.1.23 | ColumniOpsIADVlSilenceSuppression | read-create | current | Indicates if Silence Suppression is ON or OFF. |
| 1.3.6.1.3.1.1.1.2.2.1.24 | ColumniOpsIADVlGenerateTestTone | read-create | current | Indicates if Test Tone Generation is ON or OFF. |
| 1.3.6.1.3.1.1.1.2.2.1.25 | ColumniOpsIADVlRowStatus | read-create | current | Status of this entry in the iOpsIADVlTable. This variable is used to create a new voice line for the IAD. To create and activate the voice line, this object sh… |
| 1.3.6.1.3.1.1.2 | NodedlcOPS | |||
| 1.3.6.1.3.1.1.3 | NodedacOPS | |||
| 1.3.6.1.3.1.2 | NodeiadNotificationPrefix | |||
| 1.3.6.1.3.1.2.1 | NodeiadNotifications | |||
| 1.3.6.1.3.1.2.1.1 | NotificationiadOperStatusChange | current | This notification is sent when the IAD status changes. The following information is returned: iOpsIADOperStatus - The new operational status of the IAD iOpsIAD… | |
| 1.3.6.1.3.1.2.1.2 | NotificationsoftwareDownloadComplete | current | This notification is sent after an attempt to download the system image file to the IAD. The status of the download is returned in the 'iOpsIADDownloadSoftware… | |
| 1.3.6.1.3.1.2.1.3 | NotificationconfigUpDownloadComplete | current | This notification is sent after an attempt to download or upload the configuration file to or from the IAD. The status of the file transfer is returned in the … | |
| 1.3.6.1.3.1.2.1.4 | NotificationiadVoiceLineOperStatusChange | current | This notification is sent when the IAD voice line status changes. The following information is returned: iOpsIADVlOperStatus - The new operational status of IA… | |
| 1.3.6.1.3.1.2.1.5 | NotificationvoiceLineLoopbackTestComplete | current | This notification is sent after attempting a loopback test on a voice line. The 'iOpsIADVlLoopbackTestResult' object-type returns the result of the loopback te… | |
| 1.3.6.1.3.1.3 | NodeopsMIBConformance | |||
| 1.3.6.1.3.1.3.1 | NodeopsMIBGroups | |||
| 1.3.6.1.3.1.3.1.1 | GroupiOpsIADConfigGroup | current | A collection of objects that support the configuration of the IAD. | |
| 1.3.6.1.3.1.3.1.2 | GroupiOpsIADSecurityConfigGroup | current | A collection of objects pertaining to security. | |
| 1.3.6.1.3.1.3.1.3 | GroupiOpsIADVoiceServiceGroup | current | A collection of objects that support the phone services at the IAD. | |
| 1.3.6.1.3.1.3.2 | NodeopsMIBCompliances | |||
| 1.3.6.1.3.1.3.2.1 | ComplianceopsMIBCompliance | read-only | current | The compliance statement for SNMP entities which implement OPS MIB. |